Ricinoleic acid-based biopolymers

Polyanhydride Chemistry

Polyanhydrides (PAs) are a class of synthetic biodegradable polymers employed as controlled drug delivery vehicles. They can be synthesized and scaled up from low-cost starting materials. The structure of PAs can be manipulated synthetically to meet desirable characteristics. PAs are biocompatible, biodegradable, and generate nontoxic metabolites upon degradation, which are easily eliminated from the body. The rate of water penetrating into the polyanhydride (PA) matrix is slower than the anhydride bond cleavage. This phenomenon sets PAs as "surface-eroding drug delivery carriers." Consequently, a variety of PA-based drug delivery carriers in the form of solid implants, pasty injectable formulations, microspheres, nanoparticles, etc. have been developed for the sustained release of small molecule drugs, and vaccines, peptide drugs, and nucleic acid-based active agents. The rate of drug delivery is often controlled by the polymer erosion rate, which is influenced by the polymer structure and composition, crystallinity, hydrophobicity, pH of the release medium, device size, configuration, etc. Owing to the above-mentioned interesting physicochemical and mechanical properties of PAs, the present review focuses on the advancements made in the domain of synthetic biodegradable biomedical PAs for therapeutic delivery applications. Various classes of PAs, their structures, their unique characteristics, their physicochemical and mechanical properties, and factors influencing surface erosion are discussed in detail. The review also summarizes various methods involved in the synthesis of PAs and their utility in the biomedical domain as drug, vaccine, and peptide delivery carriers in different formulations are reviewed.

Poly(ester-anhydrides) Derived from Esters of Hydroxy Acid and Cyclic Anhydrides

The alternating architecture and hydrophobic side chains hinder hydrolytic cleavage and anhydride interchange in poly(sebacic acid-ricinoleic acid) (P(SA-RA)), which provides stable polyanhydrides at room temperature. In this report, a series of polyanhydrides were designed to investigate the effect of ester bonds, hydrophobic side chains, phenyl moieties, and their distance from anhydride bonds on their stability and properties. Polyanhydrides with alternating architecture are constructed by the polymerization of ester-diacids prepared from ricinoleic or other hydroxy acids with anhydrides such as succinic, maleic, and phthalic anhydrides. The hydrophobic side chains are designed closer to anhydride bonds to investigate hindrance to hydrolytic cleavage and anhydride interchange. Polyanhydrides were obtained by the activation of ester-diacid using acetic anhydride followed by melt condensation. The reactions were monitored by NMR, Fourier transform infrared (FTIR), and gel permeation chromatography (GPC). The synthesized poly(ester-anhydride)s with a shorter chain length compared to P(SA-RA) were stable at room temperature. The hydrolytic degradation studies reveal that the phenyl moiety present in poly(ricinoleic acid phthalate) (PRAP) and poly(hydroxystearic acid phthalate) (PHSAP) reduces the hydrolysis of anhydride bonds. Poly(hydroxyoctanoic acid succinate) (PHOAS) demonstrates the highest molecular weight of all tested polymers. The results reveal that the presence of hydrophobic side chains, phenyl moieties, and their distance from anhydride bonds significantly improves the stability. These stable polyanhydrides can provide convenience to use in control drug-delivery applications. The in vitro drug release study using ibuprofen shows that polymers with aromatic units such as PRAP and PHSAP establish sustained release, which presents more than 50 and 40% of ibuprofen over a period of 28 days.

Improving thermal and mechanical properties of biomass-based polymers using structurally ordered polyesters from ricinoleic acid and 4-hydroxycinnamic acids

Biomass-based copolymers with alternating ricinoleic acid and 4-hydroxycinnamic acid derivatives (p-coumaric acid, ferulic acid, and sinapinic acid) exhibit a repeating structure based on soft and hard segments, derived from ricinoleic and 4-hydroxycinnamic acids, respectively. To achieve this alternating sequence, copolymers were synthesised by the self-condensation of hetero-dimeric monomers derived by the pre-coupling of methyl ricinolate and 4-hydroxycinnamic acid. The glass transition temperature (T_g) was observed to increase as the number of methoxy groups on the main chain increased; the T_g values of poly(coumaric acid-alt-ricinoleic acid), poly(ferulic acid-alt-ricinoleic acid), and poly(sinapinic acid-alt-ricinoleic acid) are −15 °C, −4 °C, and 24 °C respectively, 58 °C, 69 °C, and 97 °C higher than that of poly(ricinoleic acid). The polymers were processed into highly flexible, visually transparent films. Among them, poly(sinapinic acid-alt-ricinoleic acid) bearing two methoxy groups on each cinnamoyl unit, is mechanically the strongest polymer, with an elastic modulus of 126.5 MPa and a tensile strength at break of 15.47 MPa.

The synthesis of structurally ordered polyesters derived from ricinoleic acid and 4-hydroxycinnamic acids improves the thermal and mechanical properties.

Poly(hydroxy acids) derived from the self-condensation of hydroxy acids: from polymerization to end-of-life options

Poly(hydroxy acids) derived from the self-condensation of hydroxy acid are biodegradable and can be fully recycled in a Circular Economy approach.

In-situ modification of castor oil with divalent metal ions like Zn (II), Cu (II), Co (II) and Ba (II) and their comparative antioxidant study by in-vitro methods

US Food and Drug Administration (FDA) permitted for direct addition of castor oil into food for human consumption and recently FDA approved castor oil as over-the-counter (OTC) for laxative drug. Castor oil (COL) is a vegetable oil and naturally polyol which is inexpensive, environmental friendly and a very valuable renewable resource. Metals are believed to influence antioxidant property of ligands. Metals copper, zinc, cobalt and barium were incorporated with castor oil and subsequently structures were established by FT-IR, UV-Visible, and ¹H NMR spectroscopic techniques. In vitro antioxidant activities of metal containing COL were determined by DPPH and superoxide scavenging methods and the results were compared with vitamin C. Enhanced antioxidant nature of metal containing castor oil was noticed and compared to virgin castor oil. This study reveals that synthesized metal containing-COL is a potential antioxidant material.

Castor oil: a suitable green source of capping agent for nanoparticle syntheses and facile surface functionalization

Castor oil (CO) is an inedible vegetable oil (VO) that has been employed extensively as a bioresource material for the synthesis of biodegradable polymers, cosmetics, lubricants, biofuels, coatings and adhesives. It is used in medicine, pharmaceuticals and biorefineries, due to its versatile chemistry. However, there has been less focus on CO as an alternative to toxic and expensive solvents, and capping/stabilizing agents routinely used in nanoparticle syntheses. It provides a richer chemistry than edible VOs as a solvent for green syntheses of nanoparticles. CO, being the only rich source of ricinoleic acid (RA), has been used as a solvent, co-solvent, stabilizing agent and polyol for the formation of polymer-nanoparticle composites. RA is a suitable alternative to oleic acid used as a capping and/or stabilizing agent. Unlike oleic acid, it provides a facile route to the functionalization of surfaces of nanoparticles and the coating of nanoparticles with polymers. For applications requiring more polar organic solvents, RA is more preferred than oleic acid. In this review, we discuss the production, chemical and physical properties, triglyceride and fatty acid (FA) compositions and applications of CO, focusing on the use of CO and RA as well as other VOs and FAs in syntheses of nanoparticles and surface functionalization.

Non-hazardous biocatalytic oxidation in Nylon-9 monomer synthesis on a 40 g scale with efficient downstream processing

This paper describes the development of a biocatalytic process on the multi-dozen gram scale for the synthesis of a precursor to Nylon-9, a specialty polyamide. Such materials are growing in demand, but their corresponding monomers are often difficult to synthesize, giving rise to biocatalytic approaches. Here, we implemented cyclopentadecanone monooxygenase as an Escherichia coli whole-cell biocatalyst in a defined medium, together with a substrate feeding-product removal concept, and an optimized downstream processing (DSP). A previously described hazardous peracid-mediated oxidation was thus replaced with a safe and scalable protocol, using aerial oxygen as oxidant, and water as reaction solvent. The engineered process converted 42 g (0.28 mol) starting material ketone to the corresponding lactone with an isolated yield of 70% (33 g), after highly efficient DSP with 95% recovery of the converted material, translating to a volumetric yield of 8 g pure product per liter. Biotechnol. Bioeng. 2017;114: 1670-1678. © 2017 Wiley Periodicals, Inc.

Polyanhydrides: Synthesis, Properties, and Applications

This review focusses on polyanhydrides, a fascinating class of degradable polymers that have been used in and investigated for many bio-related applications because of their degradability and capacity to undergo surface erosion. This latter phenomenon is driven by hydrolysis of the anhydride moieties at the surface and high hydrophobicity of the polymer such that degradation and mass loss (erosion) occur before water can penetrate deep within the bulk of the polymer. As such, when surface-eroding polymers are used as therapeutic delivery vehicles, the rate of delivery is often controlled by the rate of polymer erosion, providing predictable and controlled release rates that are often zero-order. These desirable attributes are heavily influenced by polymer composition and morphology, and therefore also monomer structure and polymerization method. This review examines approaches for polyanhydride synthesis, discusses their general thermomechanical properties, surveys their hydrolysis and degradation processes along with their biocompatibility, and looks at recent developments and uses of polyanhydrides in drug delivery, stimuli-responsive materials, and novel nanotechnologies.

Poly(ester-anhydride) for controlled delivery of hydrophilic drugs

Injectable pasty polyester-anhydride based on sebacic acid and ricinoleic acid at a 30:70 w/w ratio, poly(sebacic-co-ricinoleic-ester-anhydride) 3:7, was synthesized from the esterification of ricinoleic acid on poly(sebacic acid) followed by polyanhydride condensation. The effect of castor oil, citric acid, and glycerol added at 1% w/w as branching agents was determined. Castor oil and citric acid increased the viscosity, while glycerol decreased the viscosity of the polymer. Constant release of gentamicin and thyrotropin-releasing hormone incorporated in the polymer paste was monitored during 28 days.

Vegetable-oil-based polymers as future polymeric biomaterials

Vegetable oils are one of the most important classes of bio-resources for producing polymeric materials. The main components of vegetable oils are triglycerides - esters of glycerol with three fatty acids. Several highly reactive sites including double bonds, allylic positions and the ester groups are present in triglycerides from which a great variety of polymers with different structures and functionalities can be prepared. Vegetable-oil-based polyurethane, polyester, polyether and polyolefin are the four most important classes of polymers, many of which have excellent biocompatibilities and unique properties including shape memory. In view of these characteristics, vegetable-oil-based polymers play an important role in biomaterials and have attracted increasing attention from the polymer community. Here we comprehensively review recent developments in the preparation of vegetable-oil-based polyurethane, polyester, polyether and polyolefin, all of which have potential applications as biomaterials.

Lipase applications in oil hydrolysis with a case study on castor oil: a review

Lipase (triacylglycerol acylhydrolase) is a unique enzyme which can catalyze various types of reactions such as hydrolysis, esterification, alcoholysis etc. In particular, hydrolysis of vegetable oil with lipase as a catalyst is widely studied. Free lipase, lipase immobilized on suitable support, lipase encapsulated in a reverse micelle and lipase immobilized on a suitable membrane to be used in membrane reactor are the most common ways of employing lipase in oil hydrolysis. Castor oil is a unique vegetable oil as it contains high amounts (90%) of a hydroxy monounsaturated fatty acid named ricinoleic acid. This industrially important acid can be obtained by hydrolysis of castor oil. Different conventional hydrolysis processes have certain disadvantages which can be avoided by a lipase-catalyzed process. The degree of hydrolysis varies widely for different lipases depending on the operating range of process variables such as temperature, pH and enzyme loading. Immobilization of lipase on a suitable support can enhance hydrolysis by suppressing thermal inactivation and estolide formation. The presence of metal ions also affects lipase-catalyzed hydrolysis of castor oil. Even a particular ion has different effects on the activity of different lipases. Hydrophobic organic solvents perform better than hydrophilic solvents during the reaction. Sonication considerably increases hydrolysis in case of lipolase. The effects of additives on the same lipase vary with their types. Nonionic surfactants enhance hydrolysis whereas cationic and anionic surfactants decrease it. A single variable optimization method is used to obtain optimum conditions. In order to eliminate its disadvantages, a statistical optimization method is used in recent studies. Statistical optimization shows that interactions between any two of the following pH, enzyme concentration and buffer concentration become significant in presence of a nonionic surfactant named Span 80.

Cisplatin tumor biodistribution and efficacy after intratumoral injection of a biodegradable extended release implant

Local delivery of chemotherapeutic drugs has long been recognized as a potential method for reaching high drug doses at the target site while minimizing systemic exposure. Cisplatin is one of the most effective chemotherapeutic agents for the treatment of various tumors; however, its systemic toxicity remains the primary dose-limiting factor. Here we report that incorporation of cisplatin into a fatty acid-based polymer carrier followed by a local injection into the solid tumor resulted in a successful tumor growth inhibition in heterotopic mouse bladder tumor model in mice. Platinum concentration in the tumor tissue surrounding the injected implant remained above the therapeutic level up to 14 days after the injection, while the plasma levels were several orders of magnitude lower comparing to systemic delivery. The reported delivery system increased the maximum tolerated dose of cisplatin 5 times compared to systemic delivery, thus potentially improving antitumor efficacy of cisplatin in solid tumor model.

Local controlled delivery of anti-neoplastic RNAse to the brain

PURPOSE

Antineoplastic RNAse proteins, also known as Amphibinases, have been shown effective against various solid tumors but were found selectively neurotoxic to Purkinje cells in the cerebellum. This work describes the use of a waxy biodegradable poly(ricinoleic-co-sebacic acid) for the local controlled delivery of cytotoxic amphibinases in the parietal lobe of the brain in an attempt to overcome cerebellar neuronal toxicity while affecting glioma cells.

METHODS

Amphibinase analogues were encapsulated in poly(ricinoleic-co-sebacic acid) formulations using mix-melt technology and loaded onto surgical foam. In-vitro release was monitored by BCA colorimetry and by RNAse specific bioactivity. The implants were inserted into rat brains bearing 9L glioma to assess toxicity and efficacy.

RESULTS

The various formulations showed extended linear release for several weeks with minimal burst effect. Best in-vivo efficacy was obtained with ACC7201 containing implants, resulting in the extension of the median survival from 13 to 18 days with 13% long-term survivors.

CONCLUSION

Antineoplastic proteins were released from a p(SA-RA) polyanhydride implants in a controlled manner, providing efficacy against 9L glioma, while evading neurotoxicity in the cerebellum. The controlled release of Amphibinases forms the potential for a new therapy against brain tumors.

Hydroxy fatty acid based polyanhydride as drug delivery system: Synthesis, characterization,in vitro degradation, drug release, and biocompatibility

Low molecular weight hydroxy fatty acid based polyanhydrides were synthesized by one pot method, a variable of typical melt-condensation and characterized by FTIR, NMR, DSC, and GPC. Polymer degrades by both surface and bulk erosion as trailed by weight loss, anhydride loss and surface morphology. Control over drug release was accessed with drugs featuring different aqueous solubility, that is, methotrexate (hydrophobic) and 5-fluorouracil (hydrophilic). Effect of loading, at 5, 10, and 20% w/w of methotrexate on release profiles was also studied and negligible effect was discovered. Biocompatibility of polymers was evaluated in SD rats after SC injection of the polymer. Histopathology revealed initial inflammation of the tissues near the injection site however healed with time. Overall, these polymers were found good to control the release of the entrapped drug and were found biocompatible in preliminary in vivo study. Due to their low melting temperatures they can be injected locally (SC or intratumorally) to from regional in situ depot and have a great potential as a drug carrier for localized delivery of anticancer drugs.

Pasty injectable biodegradable polymers derived from natural acids

Pasty biodegradable polymers that can be mixed with drugs at room temperature and injected to tissue as neat composition are advantageous as they allow simple preparation and delivery of drugs, particularly for heat sensitive drugs. A series of biodegradable pasty poly (ester-anhydride)s were prepared from alkanedicarboxylic acids and ricinoleic acid and its oligomers by transesterification-repolymerization method. The polymers were characterized by common spectroscopic, chromatography, and thermal methods. Polymers containing 70% ricinoleic acid and 30% linear dicarboxylic acids with 4-10 methylene groups were synthesized. The melting point of these poly (ester-anhydride)s increased as the number of methylenes in the alkanedicarboxylic acid increased. Use of short oligomers of ricinoleic acid instead of ricinoleic acid itself increased the melting point and decreased the softness of the resulting polymers. The polymers released model drugs for a few weeks while being degraded to their fatty acid counterparts. Copolymerization of alkanedicarboxylic acids with ricinoleic acid resulted in pasty biodegradable polymers useful as injectable carriers for drugs.