Cell encapsulation with alginate and alpha-phenoxycinnamylidene-acetylated poly(allylamine)

Core-Shell Microcapsules: Biofabrication and Potential Applications in Tissue Engineering and Regenerative Medicine

The construction of biomaterial scaffolds that accurately recreate the architecture of living tissues in vitro is a major challenge in the field of tissue engineering and regenerative medicine. Core-shell microcapsules...

Alginate Hydrogels with Tuneable Properties

Alginate is a material that has many biomedical applications due to its low toxicity and a variety of favourable physical properties. In particular, the ease in which hydrogels are formed from alginate and the variety of mechanical behaviours that can be imparted on the hydrogels, by understanding alginate chemistry and intuitive design, has made alginate the most widely investigated polysaccharide used for tissue engineering. This chapter provides an overview of alginate, from how the source and natural variations in composition can influence mechanical properties of alginate hydrogels, through to some innovative techniques used to modify and functionalise the hydrogels designed specifically for cell-based therapies. The main focus is on how these strategies of understanding and controlling the chemistry of alginates have resulted in the development of hydrogels that can be tuned to deliver the physical behaviours required for successful application. This will also highlight how research on the physicochemical properties has helped alginate evolve from a structural polysaccharide in brown seaweed into a highly tuneable, multifunctional, smart biomaterial, which is likely to find further biomedical applications in the future.

Tissue Engineering Strategies for Intervertebral Disc Treatment Using Functional Polymers

Intervertebral disc (IVD) is the fibrocartilage between the vertebrae, allowing the spine to move steadily by bearing multidirectional complex loads. Aging or injury usually causes degeneration of IVD, which is one of the main reasons for low back pain prevalent worldwide and reduced quality of life. While various treatment strategies for degenerative IVD have been studied using in vitro studies, animal experiments, and clinical trials, there are unsolved limitations for endogenous regeneration of degenerative IVD. In this respect, several tissue engineering strategies that are based on the cell and scaffolds have been extensively researched with positive outcomes for regeneration of IVD tissues. Scaffolds made of functional polymers and their diverse forms mimicking the macro- and micro-structure of native IVD enhance the biological and mechanical properties of the scaffolds for IVD regeneration. In this review, we discuss diverse morphological and functional polymers and tissue engineering strategies for endogenous regeneration of degenerative IVD. Tissue engineering strategies using functional polymers are promising therapeutics for fundamental and endogenous regeneration of degenerative IVD.

Natural hydrogels for cartilage regeneration: Modification, preparation and application

Hydrogels, consisting of hydrophilic polymers, can be used as films, scaffolds, nanoparticles and drug carriers. They are one of the hot research topics in material science and tissue engineering and are widely used in the field of biomedical and biological sciences. Researchers are seeking for a type of material that is similar to human tissues and can partially replace human tissues or organs. The hydrogel has brought possibility to solve this problem. It has good biocompatibility and biodegradability. After entering the body, it does not cause immune and toxic reactions. The degradation time can be controlled, and the degradation products are nontoxic and nonimmunogenic; the final metabolites can be excreted outside the body. Owing to the lack of blood vessels and poor migration ability of chondrocytes, the self-healing ability of damaged cartilage is limited. Tissue engineering has brought a new direction for the regeneration of cartilage. Drug carriers and scaffolds made of hydrogels are widely used in cartilage tissue engineering. The present review introduces the natural hydrogels, which are often used for cartilage tissue engineering with respect to synthesis, modification and application methods.

THE TRANSLATIONAL POTENTIAL OF THIS ARTICLE

This review introduces the natural hydrogels that are often used in cartilage tissue engineering with respect to synthesis, modification and application methods. Furthermore, the essential concepts and recent discoveries were demonstrated to illustrate the achievable goals and the current limitations. In addition, we propose the putative challenges and directions for the use of natural hydrogels in cartilage regeneration.

Chemically Surface Tunable Solubility Parameter for Controllable Drug Delivery-An Example and Perspective from Hollow PAA-Coated Magnetite Nanoparticles with R6G Model Drug

Solubility parameter-dependent drug releasing property is essential in practical drug delivery systems (DDS), and how to combine magnetic nanoparticles(NPs) and suitable polymer coating towards DDS is always a crucial and valuable challenge in biomedical application. Herein, a controllable drug delivery model with a surface having a chemically tunable solubility parameter is presented using hollow magnetite/polyacrylic acid (Fe₃O₄/PAA) nanocomposites as nanocarrier towards DDS. This composite is prepared by simply coating the modified hollow Fe₃O₄ with PAA. The coating amount of PAA onto the surface of Fe₃O₄ (measured by TGA) is about 40% (w/w). Then, Rhodamine 6G (R6G) is selected as model drug in drug delivery experiment. The efficiency of drug loading and drug release of these Fe₃O₄/PAA nanocarriers are evaluated under various temperature, solvent and pH values. As a result, the best drug releasing rate was achieved as 93.0% in pH = 7.4 PBS solution after 14 h. The releasing efficiency is 86.5% in acidic condition, while a lower releasing rate (30.0%) is obtained in aqueous solution, as different forms (polyacrylic acid and polyacrylate) of PAA present different solubility parameters, causing different salt and acid effects in various solvents, swelling property of PAA, and binding force between PAA and R6G. Therefore, by changing the solubility parameter of coating polymers, the drug delivery properties could be effectively tuned. These findings prove that the DDS based on magnetic particle cores and polymer encapsulation could efficiently regulate the drug delivery properties by tuning surface solubility parameter in potential cancer targeting and therapy.

In Vitro and In Vivo Biocompatibility Evaluation of Polyallylamine and Macromolecular Heparin Conjugates Modified Alginate Microbeads

Host reactivity to biocompatible immunoisolation devices is a major challenge for cellular therapies, and a human screening model would be of great value. We designed new types of surface modified barium alginate microspheres, and evaluated their inflammatory properties using human whole blood, and the intraperitoneal response after three weeks in Wistar rats. Microspheres were modified using proprietary polyallylamine (PAV) and coupled with macromolecular heparin conjugates (Corline Heparin Conjugate, CHC). The PAV-CHC strategy resulted in uniform and stable coatings with increased anti-clot activity and low cytotoxicity. In human whole blood, PAV coating at high dose (100 µg/ml) induced elevated complement, leukocyte CD11b and inflammatory mediators, and in Wistar rats increased fibrotic overgrowth. Coating of high dose PAV with CHC significantly reduced these responses. Low dose PAV (10 µg/ml) ± CHC and unmodified alginate microbeads showed low responses. That the human whole blood inflammatory reactions paralleled the host response shows a link between inflammatory potential and initial fibrotic response. CHC possessed anti-inflammatory activity, but failed to improve overall biocompatibility. We conclude that the human whole blood assay is an efficient first-phase screening model for inflammation, and a guiding tool in development of new generation microspheres for cell encapsulation therapy.

Self-assembly of stiff, adhesive and self-healing gels from common polyelectrolytes

Underwater adhesion has numerous potential medical, household, and industrial applications. It is typically achieved through covalent polymerization and cross-linking reactions and/or the use of highly specialized biological or biomimetic polymers. As a simpler alternative to these covalent and biomimetic strategies, this article shows that stiff, gel-like complexes that adhere to various substrates under water can also be prepared through the ionic cross-linking of common, commercial polyelectrolytes. The gels form spontaneously when synthetic polycations, such as poly(allylamine) (PAH), are mixed with strongly binding multivalent anions, pyrophosphate (PPi) and tripolyphosphate (TPP). The PAH/PPi and PAH/TPP gels exhibit very high storage moduli (G∞′ ≈ 400 kPa), self-heal when torn, and adhere to both hydrophilic and hydrophobic substrates under water (with short-term tensile adhesion strengths of 350–450 kPa). Furthermore, these gels can be dissolved on demand (if adhesion needs to be reversed) by changing the ambient pH, which controls the ionization state of the polyelectrolyte and ionic cross-linker. These properties suggest that synthetic polycations cross-linked with PPi and TPP ions could provide a simple, inexpensive, and scalable platform for underwater adhesion.

Fiber-optic based cell sensors

Different whole cell fiber optic based biosensors have been developed to detect the total effect of a wide range of environmental pollutants, providing results within a very short period. These biosensors are usually built from three major components, the biorecognition element (whole-cells) intimately attached to a transducer (optic fiber) using a variety of techniques (adsorption, covalent binding, polymer trapping, etc). Even with a great progress in the field of biosensors, there is still a serious lack of commercial applications, capable of competing with traditional analytical tools.

Polymers in cell encapsulation from an enveloped cell perspective

In the past two decades, many polymers have been proposed for producing immunoprotective capsules. Examples include the natural polymers alginate, agarose, chitosan, cellulose, collagen, and xanthan and synthetic polymers poly(ethylene glycol), polyvinyl alcohol, polyurethane, poly(ether-sulfone), polypropylene, sodium polystyrene sulfate, and polyacrylate poly(acrylonitrile-sodium methallylsulfonate). The biocompatibility of these polymers is discussed in terms of tissue responses in both the host and matrix to accommodate the functional survival of the cells. Cells should grow and function in the polymer network as adequately as in their natural environment. This is critical when therapeutic cells from scarce cadaveric donors are considered, such as pancreatic islets. Additionally, the cell mass in capsules is discussed from the perspective of emerging new insights into the release of so-called danger-associated molecular pattern molecules by clumps of necrotic therapeutic cells. We conclude that despite two decades of intensive research, drawing conclusions about which polymer is most adequate for clinical application is still difficult. This is because of the lack of documentation on critical information, such as the composition of the polymer, the presence or absence of confounding factors that induce immune responses, toxicity to enveloped cells, and the permeability of the polymer network. Only alginate has been studied extensively and currently qualifies for application. This review also discusses critical issues that are not directly related to polymers and are not discussed in the other reviews in this issue, such as the functional performance of encapsulated cells in vivo. Physiological endocrine responses may indeed not be expected because of the many barriers that the metabolites encounter when traveling from the blood stream to the enveloped cells and back to circulation. However, despite these diffusion barriers, many studies have shown optimal regulation, allowing us to conclude that encapsulated grafts do not always follow nature's course but are still a possible solution for many endocrine disorders for which the minute-to-minute regulation of metabolites is mandatory.

Alginate: properties and biomedical applications

Alginate is a biomaterial that has found numerous applications in biomedical science and engineering due to its favorable properties, including biocompatibility and ease of gelation. Alginate hydrogels have been particularly attractive in wound healing, drug delivery, and tissue engineering applications to date, as these gels retain structural similarity to the extracellular matrices in tissues and can be manipulated to play several critical roles. This review will provide a comprehensive overview of general properties of alginate and its hydrogels, their biomedical applications, and suggest new perspectives for future studies with these polymers.

Improving covalent cell encapsulation with temporarily reactive polyelectrolytes

Calcium alginate/poly-L-lysine beads were coated with either 50% hydrolyzed poly(methyl vinyl ether-alt-maleic anhydride) (PMM(50)), or with poly(vinyl dimethyl azlactone-co-methacrylic acid) (50:50, PMV(50)), to form covalently shell-crosslinked capsules, and compared with analogous capsules coated with sodium alginate. All capsule types were prepared with and without C2C12 murine myoblast cells, and implanted into mice for up to 6 weeks. Cell viability, capsule integrity, fibrotic overgrowth, and mechanical strength of the capsules were assessed, and correlated with inflammatory cytokine marker levels in tail vein blood samples taken at different time points. AP-PMM(50) capsules displayed the least amount of fibrotic overgrowth, were found to be the strongest, and showed the lowest levels of TNF-α in tail vein serum samples taken at 4 h, 24 h, 1 and 6 weeks post transplantation. The results for APA and AP-PMV(50) capsules were more variable and depended on the presence or absence of encapsulated cells.

Microencapsulation of islets within alginate/poly(ethylene glycol) gels cross-linked via Staudinger ligation

Functionalized alginate and poly(ethylene glycol) (PEG) polymers were used to generate covalently linked alginate-PEG (XAlgPEG) microbeads of high stability. The cell-compatible Staudinger ligation scheme was used to cross-link phosphine-terminated PEG chemoselectively to azide-functionalized alginate, resulting in XAlgPEG hydrogels. XAlgPEG microbeads were formed by co-incubation of the two polymers, followed by ionic cross-linking of the alginate using barium ions. The enhanced stability and gel properties of the resulting XAlgPEG microbeads, as well as the compatibility of these polymers for the encapsulation of islets and beta cells lines, were investigated. The data show that XAlgPEG microbeads exhibit superior resistance to osmotic swelling compared with traditional barium cross-linked alginate (Ba-Alg) beads, with a five-fold reduction in observed swelling, as well as resistance to dissolution via chelation solution. Diffusion and porosity studies found XAlgPEG beads to exhibit properties comparable with standard Ba-Alg. XAlgPEG microbeads were found to be highly cell compatible with insulinoma cell lines, as well as rat and human pancreatic islets, where the viability and functional assessment of cells within XAlgPEG are comparable with Ba-Alg controls. The remarkable improved stability, as well as demonstrated cellular compatibility, of XAlgPEG hydrogels makes them an appealing option for a wide variety of tissue engineering applications.

Chemoselective cross-linking and functionalization of alginate via Staudinger ligation

In this study, we demonstrate the applicability of functionalized alginate to serve as a platform for the covalent cross-linking or immobilization of complementary phosphine functionalized groups via the chemoselective Staudinger ligation scheme. Azide groups were covalently linked to alginate through a heterobifunctional polyethylene glycol (PEG) linker and carbodiimide. Degree of azide functionalization was varied as a function of carbodiimide concentration and determined by proton nuclear magnetic resonance ((1)H NMR) and infrared spectroscopy. Spontaneous and covalently cross-linked alginate-PEG gels were generated via the Staudinger ligation scheme upon incubation of the azide functionalized alginate with PEG chains having 1-methyl-2-diphenylphosphino-terephthalate (MDT) as end groups. Modulation of the MDT to N(3) ratio resulted in variability of gel characteristics. In addition, azide functionalized alginate retained its capacity to instantaneously form hydrogels via electrostatic interaction with multivalent cations such as Ca(2+) and Ba(2+). Subsequently, covalent linkage of phosphine functionalized agents postgelation of the alginate was feasible, as illustrated via linkage of MDT-PEG-carboxyfluorescein. Capitalization of the chemoselective and cell compatible Staudinger ligation scheme for covalent cross-linking of alginate hydrogels may enhance the utility of this polymer for the stable encapsulation of various cell types, in addition to their use in the immobilization of labeling agents, proteins, and other bioactive molecules.

Cross-linked microcapsules formed from self-deactivating reactive polyelectrolytes

Poly(methyl vinyl ether-alt-maleic anhydride) (PMM(0)) was partially hydrolyzed in a 9/1 acetonitrile-d(3)/D(2)O mixture and then diluted with an aqueous buffer and coated onto poly-L-lysine (PLL)-coated calcium alginate capsules. The resulting 50% hydrolyzed polymer (PMM(50)) is bound to the surface-immobilized PLL through both electrostatic and covalent interactions, resulting in a shell-cross-linked hydrogel capsule that is resistant to chemical challenges. Further hydrolysis of PMM(50) in aqueous buffer was monitored by potentiometry and was found to proceed with a half-life time of about 2.5 min at 20 degrees C such that residual anhydride groups not consumed by cross-linking with PLL would be deactivated by hydrolysis within several minutes of shell formation, removing potential sites for undesired protein binding. Initial protein-binding tests involving incubation of the capsules in bovine serum albumin solutions for 24 h showed no indication of protein binding. The effects of coating temperature, PLL concentration and molecular weight, PMM(50) molecular weight, and multiple PLL-PMM(50) coatings on shell morphology and behavior were studied using confocal fluorescence microscopy as well as chemical challenges involving sodium citrate and sodium hydroxide. The resilience of the cross-linked shell improved with increasing concentrations of PLL and decreasing molecular weight of PMM(50), both of which resulted in more polyelectrolyte being bound to the capsule. The permeability of these covalently cross-linked capsules was studied using fluorescently labeled dextrans and was found to be comparable to standard calcium alginate-PLL-alginate (APA) capsules.

Materials in particulate form for tissue engineering. 2. Applications in bone

Materials in particulate form have been the subjects of intensive research in view of their use as drug delivery systems. While within this application there are still issues to be addressed, these systems are now being regarded as having a great potential for tissue engineering applications. Bone repair is a very demanding task, due to the specific characteristics of skeletal tissues, and the design of scaffolds for bone tissue engineering presents several difficulties. Materials in particulate form are now seen as a means of achieving higher control over parameters such as porosity, pore size, surface area and the mechanical properties of the scaffold. These materials also have the potential to incorporate biologically active molecules for release and to serve as carriers for cells. It is believed that the combination of these features would create a more efficient approach towards regeneration. This review focuses on the application of materials in particulate form for bone tissue engineering. A brief overview of bone biology and the healing process is also provided in order to place the application in its broader context. An original compilation of molecules with a documented role in bone tissue biology is listed, as they have the potential to be used in bone tissue engineering strategies. To sum up this review, examples of works addressing the above aspects are presented.

Cell-compatible covalently reinforced beads obtained from a chemoenzymatically engineered alginate

A chemoenzymatic strategy has been exploited to make covalently linked alginate beads with high stability. This was achieved by grafting mannuronan (alginate with 100% mannuronic acid (M)) with methacrylate moieties and then performing two enzymatic steps converting M to guluronic acid (G) in alternating sequences (MG-blocks) and in G-blocks. In this way a methacrylate grafted alginate with better gel-forming ability was achieved. Covalent bindings were introduced into the beads by using a photoinitiating system that initiated polymerization of the methacrylate moieties. The covalent links were demonstrated by beads remaining intact after treatment with EDTA. The new chemoenzymatic photocrosslinked (CEPC) beads were compatible with cells with low post-encapsulation ability like C2C12 myoblasts and human pancreatic islets. The islets continued secreting insulin after encapsulation. On contrary, cells with a high post-encapsulation proliferative ability like 293-endo cells died within 2-week post-encapsulation. The exceptional stability and the cell compatibility of the new CEPC beads make them interesting as bioreactors for delivering therapeutic proteins in future applications.

Microencapsulation of living cells in semi-permeable membranes with covalently cross-linked layers

Microencapsulation in semi-permeable membranes protects transplanted cells against immune destruction. Microcapsule strength is critical. We describe a method to microencapsulate living cells in alginate-poly-L-lysine (PLL)-alginate membranes with covalent links between adjacent layers of microcapsule membranes, while preserving the desired membrane molecular weight cut-off (MWCO) and microencapsulated cell viability. A heterobifunctional photoactivatable cross-linker, N-5-azido-2-nitrobenzoyloxysuccinimide (ANB-NOS) was used. The N-hydroxysuccinimide ester group of ANB-NOS was covalently linked to PLL. Islets of Langerhans were immobilized in alginate beads, incubated in PLL-ANB-NOS and again in alginate. Upon illumination with UVA, covalent links were created between the phenyl azide residue of ANB-NOS and alginate from both the core bead and the outer coating. Covalently linked microcapsules remained intact after 3 years in a strong alkaline buffer (pH 12), whereas standard microcapsules disappeared within 45 s in the same solution. A standardized mechanical stress broke 22-fold more standard than covalently linked microcapsules. The MWCO and microencapsulated cell viability were similar with standard and covalently linked microcapsules. These microcapsules, extremely resistant to chemical and mechanical stresses, will be useful in numerous applications.

Improving mechanical stability and density distribution of hepatocyte microcapsules by fibrin clot and gold nano-particles

Bio-artificial livers (BAL) with microencapsulated hepatocytes have the typical limitations in maintaining hepatocyte functions, mechanical stability and uniform perfusion in packed or fluidized-bed bioreactors. We have previously developed microcapsules with enhanced hepatocyte functions. Here we have introduced a fibrin network inside microcapsules by (1) mixing collagen and fibrinogen with the encapsulated hepatocytes to support the cells; (2) submerging the microcapsules into a thrombin solution to induce the formation of an insoluble fibrin network inside the microcapsules. Fracture analysis on the microcapsules revealed significant improvement in mechanical stability. We have also introduced different amounts of gold nano-particles into microcapsules to achieve different densities for uniform bioreactor perfusion. These gold nano-particles also improved the mechanical stability of the microcapsules. Both the fibrin network and gold nano-particles exhibited the additional benefits of enhancing certain bio-functions of the encapsulated hepatocytes. The applications of these improved microcapsules in the development of bio-artificial livers are discussed.

Photo-crosslinkable microcapsules formed by polyelectrolyte copolymer and modified collagen for rat hepatocyte encapsulation

New anionic polyelectrolyte tetra-copolymers with photo-crosslinkable 4-(4-methoxycinnamoyl)phenyl methacrylate monomer in addition to a HEMA-MMA-MAA ter-copolymer system were synthesized. The tetra-copolymers were used to form photo-crosslinkable microcapsules with modified collagen by complex coacervation for rat hepatocytes encapsulation. The hepatocytes were encapsulated within a two-layered membrane comprising of modified collagen as the inner core and an outer photo-crosslinkable copolymer shell. Upon photo-crosslinking of the microcapsules with UV-Vis light irradiation, the mechanical strength and chemical stability of the microcapsules, and the cellular functions of the encapsulated hepatocytes were enhanced. Particularly, the mechanical stability of the microcapsules was dramatically strengthened. The new photo-crosslinkable tetra-copolymer formulation described in this article has opened a way to the development of hepatocyte microencapsulation technology for bioartifical liver assist device.

Modification of porous aminopropyl-silicate microcapsule membrane by electrically-bonded external anionic polymers

Biocompatibility and permeability of a microcapsule membrane governs the function of a microcapsule-shaped bioartificial pancreas. We have previously developed an alginate/sol-gel-synthesized aminopropyl-silicate/alginate microcapsule (Alg/AS/Alg), which had insufficient biocompatibility. The purpose of this study was to investigate whether the biocompatibility could improve by modifying the external surface with other anionic polymers and to investigate an influence of the modification on the permeability of the membrane. Four kinds of anionic polymers, poly(oxyethylene)diglycolic acid (3 kDa), heparin (15 kDa), Alg (54 kDa) and carboxymethylcellulose (CMC, 60 kDa) were used as the external anionic polymers. The heparin-bonded gel bead had the largest resistance to the diffusion of small molecules. The molecular mass cut-off point of 150 kDa required for immunoisolation was maintained for all anionic polymers. Cellular overgrowth to the implanted islet-enclosing microcapsule, a sign of insufficient biocompatibility, was suppressed by altering the external surface material from Alg to CMC. These results suggest that the biocompatibility of the Alg/AS/anionic polymer membrane can be improved by using a biocompatible anionic polymer. At the same time, it is suggested the influence on the permeability has to be investigated to develop an optimal microcapsule for bioartificial pancreas.