Peptide design based on an antibody complementarity-determining region (CDR): construction of porphyrin-binding peptides and their affinity maturation by a combinatorial method

Redefining Peptide 14D: Substitutional Analysis for Accelerated TB Diagnosis and Enhanced Activity against Mycobacterium tuberculosis

Tuberculosis (TB) caused by Mycobacterium tuberculosis remains a predominant cause of mortality, especially in low- and middle-income nations. Recently, antimicrobial peptides have been discovered that at low concentrations could stimulate the growth of M. tuberculosis (hormetic response). In this study, such a peptide was used to investigate the effects on the time to positivity (TTP). A systematic substitution analysis of peptide 14D was synthesized using Spot synthesis technology, resulting in 171 novel peptides. Our findings revealed a spectrum of interactions, with some peptides accelerating M. tuberculosis growth, potentially aiding in faster diagnostics, while others exhibited inhibitory effects. Notably, peptide NH2-wkivfiwrr-CONH2 significantly reduced the TTP by 25 h compared to the wild-type peptide 14D, highlighting its potential in improving TB diagnostics by culture. Several peptides demonstrated potent antimycobacterial activity, with a minimum inhibitory concentration (MIC) of 20 µg/mL against H37Rv and a multidrug-resistant M. tuberculosis strain. Additionally, for two peptides, a strongly diminished formation of cord-like structures was observed, which is indicative of reduced virulence and transmission potential. This study underscores the multifaceted roles of antimicrobial peptides in TB management, from enhancing diagnostic efficiency to offering therapeutic avenues against M. tuberculosis.

Uncovering temporospatial sensitive TBI targeting strategies via in vivo phage display

The heterogeneous pathophysiology of traumatic brain injury (TBI) is a barrier to advancing diagnostics and therapeutics, including targeted drug delivery. We used a unique discovery pipeline to identify novel targeting motifs that recognize specific temporal phases of TBI pathology. This pipeline combined in vivo biopanning with domain antibody (dAb) phage display, next-generation sequencing analysis, and peptide synthesis. We identified targeting motifs based on the complementarity-determining region 3 structure of dAbs for acute (1 day post-injury) and subacute (7 days post-injury) post-injury time points in a preclinical TBI model (controlled cortical impact). Bioreactivity and temporal sensitivity of the targeting motifs were validated via immunohistochemistry. Immunoprecipitation-mass spectrometry indicated that the acute TBI targeting motif recognized targets associated with metabolic and mitochondrial dysfunction, whereas the subacute TBI motif was largely associated with neurodegenerative processes. This pipeline successfully discovered temporally specific TBI targeting motif/epitope pairs that will serve as the foundation for the next-generation targeted TBI therapeutics and diagnostics.

Downsizing antibodies: Towards complementarity-determining region (CDR)-based peptide mimetics

Monoclonal antibodies emerged as an important therapeutic drug class with remarkable specificity and binding affinity. Nonetheless, these heterotetrameric immunoglobulin proteins come with high manufacturing and therapeutic costs which can take extraordinary proportions, besides other limitations such as their limited in cellulo access imposed by their molecular size (ca. 150 kDa). These drawbacks stimulated the development of downsized functional antibody fragments (ca. 15-50 kDa), together with smaller synthetic peptides (ca. 1-3 kDa) derived from the antibodies' crucial complementarity-determining regions (CDR). Despite the general lack of success in the literal translation of CDR loops in peptide mimetics, rational structure-based and computational approaches have shown their potential for obtaining functional CDR-based peptide mimetics. In this review, we describe the efforts made in the development of antibody and nanobody paratope-derived peptide mimetics with particular focus on the used design strategies, in addition to highlighting the challenges associated with their development.

Recent Progress in Ionic Coassembly of Cationic Peptides and Anionic Species

Peptide assembly has been extensively exploited as a promising platform for the creation of hierarchical nanostructures and tailor-made bioactive materials. Ionic coassembly of cationic peptides and anionic species is paving the way to provide particularly important contribution to this topic. In this review, the recent progress of ionic coassembly soft materials derived from the electrostatic coupling between cationic peptides and anionic species in aqueous solution is systematically summarized. The presentation of this review starts from a brief background on the general importance and advantages of peptide-based ionic coassembly. After that, diverse combinations of cationic peptides with small anions, macro- and/or oligo-anions, anionic polymers, and inorganic polyoxometalates are described. Emphasis is placed on the hierarchical structures, value-added properties, and applications. The molecular design of cationic peptides and the general principles behind the ionic coassembled structures are discussed. It is summarized that the combination of interesting and unique characteristics that arise both from the chemical diversity of peptides and the wide range of anionic species may contribute in a variety of output, including drug delivery, tissue engineering, gene transfection, and antibacterial activity. The emergent new phenomena and findings are illustrated. Finally, the outlook for the peptide-based ionic coassembly systems is also presented.

Screening and Optimizing Antimicrobial Peptides by Using SPOT-Synthesis

Peptide arrays on cellulose are a powerful tool to investigate peptide interactions with a number of different molecules, for examples antibodies, receptors or enzymes. Such peptide arrays can also be used to study interactions with whole cells. In this review, we focus on the interaction of small antimicrobial peptides with bacteria. Antimicrobial peptides (AMPs) can kill multidrug-resistant (MDR) human pathogenic bacteria and therefore could be next generation antibiotics targeting MDR bacteria. We describe the screen and the result of different optimization strategies of peptides cleaved from the membrane. In addition, screening of antibacterial activity of peptides that are tethered to the surface is discussed. Surface-active peptides can be used to protect surfaces from bacterial infections, for example implants.

Design of Redox-Active Peptides: Towards Functional Materials

In nature, the majority of processes that occur in the cell involve the cycling of electrons and protons, changing the reduction and oxidation state of substrates to alter their chemical reactivity and usefulness in vivo. One of the most relevant examples of these processes is the electron transport chain, a series of oxidoreductase proteins that shuttle electrons through well-defined pathways, concurrently moving protons across the cell membrane. Inspired by these processes, researchers have sought to develop materials to mimic natural systems for a number of applications, including fuel production. The most common cofactors found in proteins to carry out electron transfer are iron sulfur clusters and porphyrin-like molecules. Both types have been studied within natural proteins, such as in photosynthetic machinery or soluble electron carriers; in parallel, an extensive literature has developed over recent years attempting to model and study these cofactors within peptide-based materials. This chapter will focus on major designs that have significantly advanced the field.

Specificity analysis of protein lysine methyltransferases using SPOT peptide arrays

Lysine methylation is an emerging post-translation modification and it has been identified on several histone and non-histone proteins, where it plays crucial roles in cell development and many diseases. Approximately 5,000 lysine methylation sites were identified on different proteins, which are set by few dozens of protein lysine methyltransferases. This suggests that each PKMT methylates multiple proteins, however till now only one or two substrates have been identified for several of these enzymes. To approach this problem, we have introduced peptide array based substrate specificity analyses of PKMTs. Peptide arrays are powerful tools to characterize the specificity of PKMTs because methylation of several substrates with different sequences can be tested on one array. We synthesized peptide arrays on cellulose membrane using an Intavis SPOT synthesizer and analyzed the specificity of various PKMTs. Based on the results, for several of these enzymes, novel substrates could be identified. For example, for NSD1 by employing peptide arrays, we showed that it methylates K44 of H4 instead of the reported H4K20 and in addition H1.5K168 is the highly preferred substrate over the previously known H3K36. Hence, peptide arrays are powerful tools to biochemically characterize the PKMTs.

Purification of high-complexity peptide microarrays by spatially resolved array transfer to gold-coated membranes

A method for the one-step purification of high-complexity peptide microarrays is presented. The entire peptide library is transferred from the synthesis support to a gold coated polyvinylidenfluoride (PVDF) membrane, whereby only full-length peptides covalently couple to the receptor membrane via an N-terminally added cysteine. Highly resolved peptide transfer and purification of up to 10 000 features per cm(2) is demonstrated.

Synthetic peptide arrays for investigating protein interaction domains

Synthetic peptide array technology was first developed in the early 1990s by Ronald Frank. Since then the technique has become a powerful tool for high throughput approaches in biology and biochemistry. Here, we focus on peptide arrays applied to investigate the binding specificity of protein interaction domains such as WW, SH3, and PDZ domains. We describe array-based methods used to reveal domain networks in yeast, and briefly review rules as well as ideas about the synthesis and application of peptide arrays. We also provide initial results of a study designed to investigate the nature and evolution of SH3 domain interaction networks in eukaryotes.

Characterization of mesoscale coiled-coil peptide-porphyrin complexes

Photoelectronically conductive self-assembling peptide-porphyrin assemblies have great potential in their use as biomaterials, owing largely to their environmentally responsive properties. We have successfully designed a coiled-coil peptide that can self-assemble to form mesoscale filaments and serve as a scaffold for porphyrin interaction. In our earlier work, peptide-porphyrin-based biomaterials were formed at neutral pH, but the structures were irregular at the nano- to microscale size range, as judged by atomic force microscopy. We identified a pH in which mesoscale fibrils were formed, taking advantage of the types of porphyrin interactions that are present in well-characterized J-aggregates. We used UV-visible spectroscopy, circular dichroism spectropolarimetry, fluorescence spectroscopy, and atomic force microscopy to characterize these self-assembling biomaterials. We propose a new assembly paradigm that arises from a set of unique porphyrin-porphyrin and porphyrin-peptide interactions whose structure may be readily modulated by changes in pH or peptide concentration.

Assimilation of metal ions bound to porphyrins or porphyrin-peptides by vibrio vulnificus, a human pathogen inhabiting estuarine and marine environments

Vibrio vulnificus, a ubiquitous microorganism in aquatic environments, causes serious septicemia to the immunocompromised host. In addition to protoheme, this species can utilize Fe-TCPP [ferric tetrakis (4-carboxyphenyl) porphine] as an iron source. In the present study, heme c bound covalently to the protein in cytochrome c, as well as the Fe-TCPP complex formed with a nanopeptide with a high affinity, was found to be useful iron sources for V. vulnificus. This bacterium was also revealed to use Zn-TCPP as a single zinc source. However, other metalloporphyrins such as Mn-TCPP and Pt-TCPP delayed the bacterial growth in the broth containing Fe-TCPP, suggesting interference in the iron assimilation. These results indicate that V. vulnificus may acquire metal ions from both free and peptide-bound metalloporphyrins.

Self-assembly of peptide-porphyrin complexes leads to pH-dependent excitonic coupling

Using absorbance, fluorescence, resonance light scattering, and circular dichroism spectroscopy, we studied the self-assembly of the anionic meso-tetra(4-sulfonatophenyl)porphine (TPPS(4)(2-/4-)) and a cationic 22-residue polypeptide. We found that three TPPS(4)(2-/4-) molecules bind to the peptide, which contains nine lysine residues in the primary sequence. In acidic solutions, when the peptide is in the random-coil conformation, TPPS(4)(2-) bound to the peptide forms excitonically coupled J-aggregates. In pH 7.6 solutions, when the peptide secondary structure is partially alpha-helical, the porphyrin-to-peptide binding constants are approximately the same as in acidic solutions (approximately 3 x 10(6) M(-1)), but excitonic interactions between the porphyrins are insignificant. The binding of TPPS(4)(2-/4-) to lysine-containing peptides is cooperative and can be described by the Hill model. Our results show that porphyrin binding can be used to change the secondary structure of peptide-based biomaterials. In addition, binding to peptides could be used to optimize porphyrin intermolecular electronic interactions (exciton coupling), which is relevant for the design of light-harvesting antennas for artificial photosynthesis.

Self assembly of coiled-coil peptide-porphyrin complexes

We are interested in the controlled assembly of photoelectronic materials using peptides as scaffolds and porphyrins as the conducting material. We describe the integration of a peptide-based polymer strategy with the ability of designed basic peptides to bind anionic porphyrins in order to create regulated photoelectronically active biomaterials. We have described our peptide system in earlier work, which demonstrates the ability of a peptide to form filamentous materials made up of self-assembling coiled-coil structures. We have modified this peptide system to include lysine residues appropriately positioned to specifically bind meso-tetrakis(4-sulfonatophenyl)porphine (TPPS(4)), a porphyrin that contains four negatively charged sulfonate groups at neutral pH. We measure the binding of TPPS(4) to our peptide using UV--visible and fluorescence spectroscopies to follow the porphyrin signature. We determine the concomitant acquisition of helical secondary structure in the peptide upon TPPS(4) binding using circular dichroism spectropolarimetry. This binding fosters polymerization of the peptide, as shown by absorbance extinction effects in the peptide CD spectra. The morphologies of the peptide/porphyrin complexes, as imaged by atomic force microscopy, are consistent with the coiled-coil polymers that we had characterized earlier, except that the heights are slightly higher, consistent with porphyrin binding. Evidence for exciton coupling in the copolymers is shown by red-shifting in the UV--visible data, however, the coupling is weak based on a lack of fluorescence quenching in fluorescence experiments.

Peptide arrays on cellulose support: SPOT synthesis, a time and cost efficient method for synthesis of large numbers of peptides in a parallel and addressable fashion

Peptide synthesis on cellulose using SPOT technology allows the parallel synthesis of large numbers of addressable peptides in small amounts. In addition, the cost per peptide is less than 1% of peptides synthesized conventionally on resin. The SPOT method follows standard fluorenyl-methoxy-carbonyl chemistry on conventional cellulose sheets, and can utilize more than 600 different building blocks. The procedure involves three phases: preparation of the cellulose membrane, stepwise coupling of the amino acids and cleavage of the side-chain protection groups. If necessary, peptides can be cleaved from the membrane for assays performed using soluble peptides. These features make this method an excellent tool for screening large numbers of peptides for many different purposes. Potential applications range from simple binding assays, to more sophisticated enzyme assays and studies with living microbes or cells. The time required to complete the protocol depends on the number and length of the peptides. For example, 400 9-mer peptides can be synthesized within 6 days.

Self-assembly of peptide porphyrin complexes: toward the development of smart biomaterials

The anionic porphyrin, meso-tetrakis(4-sulfonatophenyl)porphine, is found to tightly bind to an engineered 14-residue peptide, resulting in induced alpha-helix formation when mixed in aqueous solutions. The small porphyrin-peptide dissociation constant (2 muM) observed is related to the energetics of peptide helix formation coupled with electrostatic interactions between the anionic porphyrin and cationic residues in the coiled peptide. Analytical ultracentrifugation measurements indicate the porphyrin-peptide complexes dimerize, probably into a coiled coil, and weakly associate to form even higher order structures.

Peroxidase Activity of Cationic Metalloporphyrin-Antibody Complexes

Peroxidase activity of a complex of water-soluble cationic metalloporphyrin with anti-cationic porphyrin antibody is reported. Antibody 12E11G, which was prepared by immunization with a conjugate of 5-(4-carboxyphenyl)-10,15,20-tris(4-methylpyridyl)porphine iodide (3MPy1C), bound to tetramethylpyridylporphyrin iron complex (FeIII-TMPyP) with the dissociation constant of 2.6 x 10(-7) M. The complex of antibody 12E11G with FeIII-TMPyP catalyzed oxidation of pyrogallol, catechol, and guaiacol. A Lineweaver-Burk plot for the oxidation of pyrogallol catalyzed by the FeIII-TMPyP-antibody complex showed Km=8.6 mM and kcat=680 min(-1). Under the same conditions, Km and kcat for horseradish peroxidase (HRP) were 0.8 mM and 1750 min(-1), respectively. Although the binding interaction of the antibody to the substrates was one order lower than that of native HRP, the peroxidase activity of this system was in the same order of magnitude as that of HRP.

Affinity chromatography techniques based on the immobilisation of peptides exhibiting specific binding activity

Affinity chromatography is one of the powerful techniques in selective purification and isolation of a great number of compounds. New challenges in scientific research, such as high-throughput systems, isolation procedures that allow to obtain a single substance from a complex matrix in high degree of purity, low costs and wide availability, have led to the discovery of new tailor-made synthetic recognition systems. In this review the design, synthesis, purification and characterisation of peptides with recognition properties are discussed. Applications of peptide ligands are described and analytical tools mentioned.

Inhibition of hepatitis C virus NS3 protease by peptides derived from complementarity-determining regions (CDRs) of the monoclonal antibody 8D4: tolerance of a CDR peptide to conformational changes of a target

We have synthesized and characterized peptides derived from complementarity-determining regions (CDRs) of 8D4, a mouse monoclonal antibody against NS3 protease domain of hepatitis C virus. 8D4 inhibits enzymatic activity without its cofactor, NS4A peptide. One of the synthetic peptides derived from CDRs, CDR1 of the heavy-chain (CDR-H1) peptide strongly inhibited NS3 protease activity competitively in the absence of NS4A and non-competitively in the presence of NS4A. Moreover, cyclic CDR-H1 peptides bridged by disulfide inhibited NS3 protease more potently. The chain length of the CDR-H1 peptide is critical for strong inhibition, even when the peptide is circularized. This finding suggests the importance of peptide conformation. In contrast to a cognate antibody molecule, CDR-derived peptides may provide good ligands for target molecules by having a tolerance to conformational changes of the targets caused by cofactor binding or mutation.

Construction of the novel conformationally-restricted peptide library for screening of peptides that control the interaction between nucleobases

A unique conformationally-restricted peptide library was constructed using a loop structure as a structural scaffold. This library was used for the screening of the amino acid sequences that control the interaction between nucleobase triplets. The peptides have PNAs at the C-terminus as the recognition site and the random amino acid sequence at the N-terminus as the effector for the interaction between PNA and its complementary DNA triplets. From the peptide libraries constructed by the positional scanning method, the sequences that affect the interaction between PNA and complementary DNA were selected. The difference in the characteristic results by using A-T and G-C pairs was presented. This study would also give us some useful information about interaction between peptides and nucleic acids, such as relevances between these biomolecules in a prebiotic era.

Inhibition of the hepatitis C virus NS3 protease activity by Fv fragment of antibody 8D4

An antibody variable domain fragment (Fv) is a candidate for a specific inhibitor of the hepatitis C virus (HCV) NS3 protease. Here we report the functional characterization of the Fv of antibody 8D4, which is specific for the active site of the HCV NS3 protease domain. The variable fragments of 8D4 in the forms of Fv and scFv (VH-(G(4)S)(3)-VL) were expressed as insoluble fractions in the periplasm of Escherichia coli, and were subsequently solubilized, purified under denaturing conditions, and refolded. The Fv had an inhibition profile almost identical to that of the parent IgG, with an IC(50) of 71.3 nM, whereas the scFv had a greatly decreased affinity to NS3 and was the same as the isolated VH fragment. To date, this is the first report of an antibody Fv fragment specific for the HCV NS3 protease domain, aimed at designing potent protease inhibitors and antiviral drugs.