Synthetic protocells to mimic and test cell function

Advances in Two-Dimensional Ion-Selective Membranes: Bridging Nanoscale Insights to Industrial-Scale Salinity Gradient Energy Harvesting

Salinity gradient energy, often referred to as the Gibbs free energy difference between saltwater and freshwater, is recognized as "blue energy" due to its inherent cleanliness, renewability, and continuous availability. Reverse electrodialysis (RED), relying on ion-selective membranes, stands as one of the most prevalent and promising methods for harnessing salinity gradient energy to generate electricity. Nevertheless, conventional RED membranes face challenges such as insufficient ion selectivity and transport rates and the difficulty of achieving the minimum commercial energy density threshold of 5 W/m2. In contrast, two-dimensional nanostructured materials, featuring nanoscale channels and abundant functional groups, offer a breakthrough by facilitating rapid ion transport and heightened selectivity. This comprehensive review delves into the mechanisms of osmotic power generation within a single nanopore and nanochannel, exploring optimal nanopore dimensions and nanochannel lengths. We subsequently examine the current landscape of power generation using two-dimensional nanostructured materials in laboratory-scale settings across various test areas. Furthermore, we address the notable decline in power density observed as test areas expand and propose essential criteria for the industrialization of two-dimensional ion-selective membranes. The review concludes with a forward-looking perspective, outlining future research directions, including scalable membrane fabrication, enhanced environmental adaptability, and integration into multiple industries. This review aims to bridge the gap between previous laboratory-scale investigations of two-dimensional ion-selective membranes in salinity gradient energy conversion and their potential large-scale industrial applications.

Balanced activation of Nrf-2/ARE mediates the protective effect of sulforaphane on keratoconus in the cell mechanical microenvironment

Keratoconus (KC) is a progressive degenerative disease that usually occurs bilaterally and is characterized by corneal thinning and apical protrusion of the cornea. Oxidative stress is an indicator of the accumulation of reactive oxygen species (ROS), and KC keratocytes exhibit increased ROS production compared with that of normal keratocytes. Therefore, oxidative stress in KC keratocytes may play a major role in the development and progression of KC. Here, we investigated the protective effect of sulforaphane (SF) antioxidants using a hydrogel-simulated model of the cell mechanical microenvironment of KC. The stiffness of the KC matrix microenvironment in vitro was 16.70 kPa and the stiffness of the normal matrix microenvironment was 34.88 kPa. Human keratocytes (HKs) were cultured for 24 h before observation or drug treatment with H2O2 in the presence or absence of SF. The levels of oxidative stress, nuclear factor E2-related factor 2 (Nrf-2) and antioxidant response element (ARE) were detected. The high-stress state of HKs in the mechanical microenvironment of KC cells compensates for the activation of the Nrf-2/ARE signaling pathway. H2O2 leads to increased oxidative stress and decreased levels of antioxidant proteins in KC. In summary, SF can reduce endogenous and exogenous oxidative stress and increase the antioxidant capacity of cells.

A microscale soft ionic power source modulates neuronal network activity

Bio-integrated devices need power sources to operate1,2. Despite widely used technologies that can provide power to large-scale targets, such as wired energy supplies from batteries or wireless energy transduction3, a need to efficiently stimulate cells and tissues on the microscale is still pressing. The ideal miniaturized power source should be biocompatible, mechanically flexible and able to generate an ionic current for biological stimulation, instead of using electron flow as in conventional electronic devices4-6. One approach is to use soft power sources inspired by the electrical eel7,8; however, power sources that combine the required capabilities have not yet been produced, because it is challenging to obtain miniaturized units that both conserve contained energy before usage and are easily triggered to produce an energy output. Here we develop a miniaturized soft power source by depositing lipid-supported networks of nanolitre hydrogel droplets that use internal ion gradients to generate energy. Compared to the original eel-inspired design7, our approach can shrink the volume of a power unit by more than 105-fold and it can store energy for longer than 24 h, enabling operation on-demand with a 680-fold greater power density of about 1,300 W m-3. Our droplet device can serve as a biocompatible and biological ionic current source to modulate neuronal network activity in three-dimensional neural microtissues and in ex vivo mouse brain slices. Ultimately, our soft microscale ionotronic device might be integrated into living organisms.

Enhancing membrane-based soft materials with magnetic reconfiguration events

Adaptive and bioinspired droplet-based materials are built using the droplet interface bilayer (DIB) technique, assembling networks of lipid membranes through adhered microdroplets. The properties of these lipid membranes are linked to the properties of the droplets forming the interface. Consequently, rearranging the relative positions of the droplets within the network will also alter the properties of the lipid membranes formed between them, modifying the transmembrane exchanges between neighboring compartments. In this work, we achieved this through the use of magnetic fluids or ferrofluids selectively dispersed within the droplet-phase of DIB structures. First, the ferrofluid DIB properties are optimized for reconfiguration using a coupled experimental-computational approach, exploring the ideal parameters for droplet manipulation through magnetic fields. Next, these findings are applied towards larger, magnetically-heterogeneous collections of DIBs to investigate magnetically-driven reconfiguration events. Activating electromagnets bordering the DIB networks generates rearrangement events by separating and reforming the interfacial membranes bordering the dispersed magnetic compartments. These findings enable the production of dynamic droplet networks capable of modifying their underlying membranous architecture through magnetic forces.

Chemically Triggered Coalescence and Reactivity of Droplet Fibers

We describe the role of functional polymer surfactants in the construction and triggered collapse of droplet-based fibers and the use of these macroscopic supracolloidal structures for reagent compartmentalization. Copolymer surfactants containing both zwitterionic and tertiary amine pendent groups were synthesized for stabilization of oil-in-water droplets, in which the self-adherent properties of the selected zwitterions impart interdroplet adherence, while the amine groups provide access to pH-triggered coalescence. Macroscopic fibers, obtained by droplet extrusion, were prepared with reagents embedded in spatially distinct components of the fibers. Upon acidification of the continuous aqueous phase, protonation of the polymer surfactants increases their hydrophilicity and causes rapid fiber disruption and collapse. Cross-linked versions of these supracolloidal fibers were stable upon acidification and appeared to direct interdroplet passage of encapsulants along the fiber length. Overall, these functional, responsive emulsions provide a strategy to impart on-demand chemical reactivity to soft materials structures that benefits from the interfacial chemistry of the system.

Droplet-Based Membranous Soft Materials

Inspired by the structure and functionality of natural cellular tissues, droplet interface bilayer (DIB)-based materials strategically combine model membrane assembly techniques and droplet microfluidics. These structures have shown promising results in applications ranging from biological computing to chemical microrobots. This Feature Article briefly explores recent advances in the areas of construction, manipulation, and functionalization of DIB networks; discusses their unique mechanics; and focuses on the contributions of our lab in the advancement of this platform. We also reflect on some of the limitations facing DIB-based materials and how they might be addressed, highlighting promising applications made possible through the refinement of the material concept.

Versatile Phospholipid Assemblies for Functional Synthetic Cells and Artificial Tissues

The bottom-up construction of a synthetic cell from nonliving building blocks capable of mimicking cellular properties and behaviors helps to understand the particular biophysical properties and working mechanisms of a cell. A synthetic cell built in this way possesses defined chemical composition and structure. Since phospholipids are native biomembrane components, their assemblies are widely used to mimic cellular structures. Here, recent developments in the formation of versatile phospholipid assemblies are described, together with the applications of these assemblies for functional membranes (protein reconstituted giant unilamellar vesicles), spherical and nonspherical protoorganelles, and functional synthetic cells, as well as the high-order hierarchical structures of artificial tissues. Their biomedical applications are also briefly summarized. Finally, the challenges and future directions in the field of synthetic cells and artificial tissues based on phospholipid assemblies are proposed.

The emerging science of electrosynbionics

Dramatic changes in electricity generation, use and storage are needed to keep pace with increasing demand while reducing carbon dioxide emissions. There is great potential for application of bioengineering in this area. We have the tools to re-engineer biological molecules and systems, and a significant amount of research and development is being carried out on technologies such as biophotovoltaics, biocapacitors, biofuel cells and biobatteries. However, there does not seem to be a satisfactory overarching term to describe this area, and I propose a new word-'electrosynbionics'. This is to be defined as: the creation of engineered devices that use components derived from or inspired by biology to perform a useful electrical function. Here, the phrase 'electrical function' is taken to mean the generation, use and storage of electricity, where the primary charge carriers may be either electrons or ions. 'Electrosynbionics' is distinct from 'bioelectronics', which normally relates to applications in sensing, computing or electroceuticals. Electrosynbionic devices have the potential to solve challenges in electricity generation, use and storage by exploiting or mimicking some of the desirable attributes of biological systems, including high efficiency, benign operating conditions and intricate molecular structures.

Formation of Polarized, Functional Artificial Cells from Compartmentalized Droplet Networks and Nanomaterials, Using One-Step, Dual-Material 3D-Printed Microfluidics

The bottom-up construction of synthetic cells with user-defined chemical organization holds considerable promise in the creation of bioinspired materials. Complex emulsions, droplet networks, and nested vesicles all represent platforms for the engineering of segregated chemistries with controlled communication, analogous to biological cells. Microfluidic manufacture of such droplet-based materials typically results in radial or axisymmetric structures. In contrast, biological cells frequently display chemical polarity or gradients, which enable the determination of directionality, and inform higher-order interactions. Here, a dual-material, 3D-printing methodology to produce microfluidic architectures that enable the construction of functional, asymmetric, hierarchical, emulsion-based artificial cellular chassis is developed. These materials incorporate droplet networks, lipid membranes, and nanoparticle components. Microfluidic 3D-channel arrangements enable symmetry-breaking and the spatial patterning of droplet hierarchies. This approach can produce internal gradients and hemispherically patterned, multilayered shells alongside chemical compartmentalization. Such organization enables incorporation of organic and inorganic components, including lipid bilayers, within the same entity. In this way, functional polarization, that imparts individual and collective directionality on the resulting artificial cells, is demonstrated. This approach enables exploitation of polarity and asymmetry, in conjunction with compartmentalized and networked chemistry, in single and higher-order organized structures, thereby increasing the palette of functionality in artificial cellular materials.

Tuning the membrane permeability of polymersome nanoreactors developed by aqueous emulsion polymerization-induced self-assembly

Polymeric vesicles (or polymersomes) are hollow bilayer structures consisting of an inner aqueous compartment enclosed by a hydrophobic membrane. Vesicular constructs are ubiquitous in nature and perform a variety of functions by compartmentalizing molecules into disparate environments. For polymer chemists, the synthesis of vesicles can be readily accomplished using polymerization-induced self-assembly (PISA), whereby pure vesicle morphologies can be easily accessed by tuning initial reaction parameters. Research into polymersomes is motivated primarily by the fact that hydrophilic cargo such as drug molecules, DNA, or enzymes can be encapsulated and protected from the often harsh conditions of the surrounding environment. A key factor governing the capability of vesicles to retain and protect their cargo is the permeability of their hydrophobic membrane. Herein, we demonstrate that membrane permeability of enzyme-loaded epoxy-functionalized polymersomes synthesized by aqueous emulsion PISA can be modulated via epoxide ring-opening with various diamine cross-linkers and hydrophobic primary amines. In general, membrane cross-linking or amine conjugation resulted in increased polymersome membrane thickness. Membrane modification was also found to decrease permeability in all cases, as measured by enzymatically-catalysed oxidation of an externally administered substrate. Functionalization with hydrophobic amines resulted in the largest reduction in enzyme activity, suggesting significant blocking of substrate diffusion into the central aqueous compartment. This procedurally facile strategy yields meaningful insight into how the chemical structure of the membrane influences permeability and thus could be generally applied to the formulation of polymeric vesicles for therapeutic applications.

Artificially Reprogrammed Macrophages as Tumor-Tropic Immunosuppression-Resistant Biologics to Realize Therapeutics Production and Immune Activation

To engineer patient-derived cells into therapy-purposed biologics is a promising solution to realize personalized treatments. Without using gene-editing technology, a live cell-typed therapeutic is engineered for tumor treatment by artificially reprogramming macrophages with hyaluronic acid-decorated superparamagnetic iron oxide nanoparticles (HIONs). This nanoparticle-assisted cell-reprogramming strategy demonstrates profound advantages, due to the combined contributions from the biological regulation of HIONs and the intrinsic nature of macrophages. Firstly, the reprogrammed macrophages present a substantial improvement in their innate capabilities, such as more effective tumor targeting and more efficient generation of bioactive components (e.g., reactive oxygen species, bioactive cytokines) to suppress tumor growth. Furthermore, this cell therapeutic exhibits cytostatic/proapoptotic effects specific to cancer cells. Secondly, HIONs enable macrophages more resistant to the intratumoral immunosuppressive environment. Thirdly, the macrophages are endowed with a strong ability to prime in situ protumoral M2 macrophages into antitumor M1 phenotype in a paracrine-like manner. Consequently, a synergistic tumor-inhibition effect is achieved. This study shows that engineering nanomaterial-reprogrammed live cells as therapeutic biologics may be a more preferable option to the commonly used approaches where nanomaterials are administrated to induce bioresponse of certain cells in vivo.

Reconfiguring droplet interface bilayer networks through sacrificial membranes

The droplet interface bilayer platform allows for the fabrication of stimuli-responsive microfluidic materials, using phospholipids as an organic surfactant in water-in-oil mixtures. In this approach, lipid-coated droplets are adhered together in arranged networks, forming lipid bilayer membranes with embedded transporters and establishing selective exchange pathways between neighboring aqueous subcompartments. The resulting material is a biologically inspired droplet-based material that exhibits emergent properties wherein different droplets accomplish different functions, similar to multicellular organisms. These networks have been successfully applied towards biomolecular sensing and energy harvesting applications. However, unlike their source of inspiration, these droplet structures are often static. This limitation not only renders the networks unable to adapt or modify their structure and function after formation but also limits their long term use as passive ionic exchange between neighboring droplet pairs may initiate immediately after the membranes are established. This work addresses this shortcoming by rupturing selected sacrificial membranes within the collections of droplets to rearrange the remaining droplets into new configurations, redirecting the droplet-droplet exchange pathways. This is accomplished through electrical shocks applied between selected droplets. Experimental outcomes are compared to predictions provided by a coupled mechanical-electrical model for the droplet networks, and then advanced configurations are proposed using this model.

Functional aqueous droplet networks

Droplet interface bilayers (DIBs), comprising individual lipid bilayers between pairs of aqueous droplets in an oil, are proving to be a useful tool for studying membrane proteins. Recently, attention has turned to the elaboration of networks of aqueous droplets, connected through functionalized interface bilayers, with collective properties unachievable in droplet pairs. Small 2D collections of droplets have been formed into soft biodevices, which can act as electronic components, light-sensors and batteries. A substantial breakthrough has been the development of a droplet printer, which can create patterned 3D droplet networks of hundreds to thousands of connected droplets. The 3D networks can change shape, or carry electrical signals through defined pathways, or express proteins in response to patterned illumination. We envisage using functional 3D droplet networks as autonomous synthetic tissues or coupling them with cells to repair or enhance the properties of living tissues.

Quantitative Raman microspectroscopy for water permeability parameters at a droplet interface bilayer

Using confocal Raman microspectroscopy, we derive parameters for bilayer water transport across an isolated nanoliter aqueous droplet pair.

A Cell-Mimicking Structure Converting Analog Volume Changes to Digital Colorimetric Output with Molecular Selectivity

We herein report a three-component cell-mimicking structure with a peroxidase-like iron oxide nanozyme as the nucleus, a molecularly imprinted hydrogel shell as cytoplasm, and a lipid bilayer membrane. The structure was characterized by cryo and negative stain TEM and also by a calcein leakage test. By introducing charged monomers, the gel shell can swell or shrink in response to salt concentration. By lowering the salt concentration, the gradual "analog" gel volume change was reflected in a switch-like "digital" colorimetric output by the burst of membrane and oxidation of substrates such as 3,3',5,5'-tetramethylbenzidine (TMB). Controlled access was also achieved by using melittin to insert channels cross the membrane, and selective molecular transport was realized by the molecularly imprinted gel. The functions of each component are coupled, and this sophisticated tripartite structure provides a new platform for modular design of new materials. Our cell-mimicking structure is functional and it is complementary to the current protocell work that aims to understand the origin of life.

An electric-eel-inspired soft power source from stacked hydrogels

Progress towards the integration of technology into living organisms requires electrical power sources that are biocompatible, mechanically flexible, and able to harness the chemical energy available inside biological systems. Conventional batteries were not designed with these criteria in mind. The electric organ of the knifefish Electrophorus electricus (commonly known as the electric eel) is, however, an example of an electrical power source that operates within biological constraints while featuring power characteristics that include peak potential differences of 600 volts and currents of 1 ampere. Here we introduce an electric-eel-inspired power concept that uses gradients of ions between miniature polyacrylamide hydrogel compartments bounded by a repeating sequence of cation- and anion-selective hydrogel membranes. The system uses a scalable stacking or folding geometry that generates 110 volts at open circuit or 27 milliwatts per square metre per gel cell upon simultaneous, self-registered mechanical contact activation of thousands of gel compartments in series while circumventing power dissipation before contact. Unlike typical batteries, these systems are soft, flexible, transparent, and potentially biocompatible. These characteristics suggest that artificial electric organs could be used to power next-generation implant materials such as pacemakers, implantable sensors, or prosthetic devices in hybrids of living and non-living systems.

Hierarchical Self-Assembly of a Copolymer-Stabilized Coacervate Protocell

Complex coacervate microdroplets are finding increased utility in synthetic cell applications due to their cytomimetic properties. However, their intrinsic membrane-free nature results in instability that limits their application in protocell research. Herein, we present the development of a new protocell model through the spontaneous interfacial self-assembly of copolymer molecules on biopolymer coacervate microdroplets. This hierarchical protocell model not only incorporates the favorable properties of coacervates (such as spontaneous assembly and macromolecular condensation) but also assimilates the essential features of a semipermeable copolymeric membrane (such as discretization and stabilization). This was accomplished by engineering an asymmetric, biodegradable triblock copolymer molecule comprising hydrophilic, hydrophobic, and polyanionic components capable of direct coacervate membranization via electrostatic surface anchoring and chain self-association. The resulting hierarchical protocell demonstrated striking integrity as a result of membrane formation, successfully stabilizing enzymatic cargo against coalescence and fusion in discrete protocellular populations. The semipermeable nature of the copolymeric membrane enabled the incorporation of a simple enzymatic cascade, demonstrating chemical communication between discrete populations of neighboring protocells. In this way, we pave the way for the development of new synthetic cell constructs.

Forming Sticky Droplets from Slippery Polymer Zwitterions

Polymer zwitterions are generally regarded as hydrophilic and repellant or "slippery" materials. Here, a case is described in which the polymer zwitterion structure is tailored to decrease water solubility, stabilize emulsion droplets, and promote interdroplet adhesion. Harnessing the upper critical solution temperature of sulfonium- and ammonium-based polymer zwitterions in water, adhesive droplets are prepared by adding organic solvent to an aqueous polymer solution at elevated temperature, followed by agitation to induce emulsification. Droplet aggregation is observed as the mixture cools. Variation of salt concentration, temperature, polymer concentration, and polymer structure modulates these interdroplet interactions, resulting in distinct changes in emulsion stability and fluidity. Under attractive conditions, emulsions encapsulating 50-75% oil undergo gelation. By contrast, emulsions prepared under conditions where droplets are nonadhesive remain fluid and, for oil fractions exceeding 0.6, coalescence is observed. The uniquely reactive nature of the selected zwitterions allows their in situ modification and affords a route to chemically trigger deaggregation and droplet dispersion. Finally, experiments performed in a microfluidic device, in which droplets are formed under conditions that either promote or suppress adhesion, confirm the salt-responsive character of these emulsions and the persistence of adhesive interdroplet interactions under flow.

Enthalpic Effects of Chain Length and Unsaturation on Water Permeability across Droplet Bilayers of Homologous Monoglycerides

A deeper understanding of unassisted passive transport processes can better delineate basic lipid dynamics in biological membranes. A droplet interface bilayer (DIB) is made by contacting two aqueous droplets covered with a lipid monolayer, and has increasingly been employed as a model artificial biological membrane. In this study, we have investigated the effect of acyl chain structure of amphiphilic monoglycerides on the osmotic permeability of water across DIB membranes composed of these monoglycerides, where the acyl chain length (C14-C24), number of double bonds (1-4), and the position of double bond are varied systematically along the acyl chains. Both permeability values and activation energies have been extracted for water transport across a lipid bilayer formed of a homologous series of lipids, allowing us to make ready comparisons between the different lipids and potentially better elucidate the contributions that molecular motifs make to the permeation process.

Hydrodynamic trapping for rapid assembly and in situ electrical characterization of droplet interface bilayer arrays

The droplet interface bilayer (DIB) is a modular technique for assembling planar lipid membranes between water droplets in oil. The DIB method thus provides a unique capability for developing digital, droplet-based membrane platforms for rapid membrane characterization, drug screening and ion channel recordings. This paper demonstrates a new, low-volume microfluidic system that automates droplet generation, sorting, and sequential trapping in designated locations to enable the rapid assembly of arrays of DIBs. The channel layout of the device is guided by an equivalent circuit model, which predicts that a serial arrangement of hydrodynamic DIB traps enables sequential droplet placement and minimizes the hydrodynamic pressure developed across filled traps to prevent squeeze-through of trapped droplets. Furthermore, the incorporation of thin-film electrodes fabricated via evaporation metal deposition onto the glass substrate beneath the channels allows for the first time in situ, simultaneous electrical interrogation of multiple DIBs within a sealed device. Combining electrical measurements with imaging enables measurements of membrane capacitance and resistance and bilayer area, and our data show that DIBs formed in different trap locations within the device exhibit similar sizes and transport properties. Simultaneous, single channel recordings of ion channel gating in multiple membranes are obtained when alamethicin peptides are incorporated into the captured droplets, qualifying the thin-film electrodes as a means for measuring stimuli-responsive functions of membrane-bound biomolecules. This novel microfluidic-electrophysiology platform provides a reproducible, high throughput method for performing electrical measurements to study transmembrane proteins and biomembranes in low-volume, droplet-based membranes.

Multiscale modeling of droplet interface bilayer membrane networks

Droplet interface bilayer (DIB) networks are considered for the development of stimuli-responsive membrane-based materials inspired by cellular mechanics. These DIB networks are often modeled as combinations of electrical circuit analogues, creating complex networks of capacitors and resistors that mimic the biomolecular structures. These empirical models are capable of replicating data from electrophysiology experiments, but these models do not accurately capture the underlying physical phenomena and consequently do not allow for simulations of material functionalities beyond the voltage-clamp or current-clamp conditions. The work presented here provides a more robust description of DIB network behavior through the development of a hierarchical multiscale model, recognizing that the macroscopic network properties are functions of their underlying molecular structure. The result of this research is a modeling methodology based on controlled exchanges across the interfaces of neighboring droplets. This methodology is validated against experimental data, and an extension case is provided to demonstrate possible future applications of droplet interface bilayer networks.

Contact bubble bilayers with flush drainage

Planar lipid bilayers have been used to form stable bilayers into which membrane proteins are reconstituted for measurements of their function under an applied membrane potential. Recently, a lipid bilayer membrane is formed by the apposition of two monolayers that line an oil-electrolyte interface. Here, a bilayer membrane system is developed with picoliter bubbles under mechanically and chemically manipulable conditions. A water bubble lined with a phospholipid monolayer is blown from a glass pipette into an oil phase. Two blowing pipettes are manipulated, and bubbles (each with a diameter of ~ 50 μm) are held side by side to form a bilayer, which is termed a contact bubble bilayer. With the electrode implemented in the blowing pipette, currents through the bilayer are readily measured. The intra-bubble pressure is varied with the pressure-controller, leading to various sizes of the bubble and the membrane area. A rapid solution exchange system is developed by introducing additional pressure-driven injection pipettes, and the blowing pipette works as a drain. The solution is exchanged within 20 ms. Also, an asymmetric membrane with different lipid composition of each leaflet is readily formed. Example applications of this versatile method are presented to characterize the function of ion channels.

Developments in the tools and methodologies of synthetic biology

Synthetic biology is principally concerned with the rational design and engineering of biologically based parts, devices, or systems. However, biological systems are generally complex and unpredictable, and are therefore, intrinsically difficult to engineer. In order to address these fundamental challenges, synthetic biology is aiming to unify a “body of knowledge” from several foundational scientific fields, within the context of a set of engineering principles. This shift in perspective is enabling synthetic biologists to address complexity, such that robust biological systems can be designed, assembled, and tested as part of a biological design cycle. The design cycle takes a forward-design approach in which a biological system is specified, modeled, analyzed, assembled, and its functionality tested. At each stage of the design cycle, an expanding repertoire of tools is being developed. In this review, we highlight several of these tools in terms of their applications and benefits to the synthetic biology community.

A long-lasting concentration cell based on a magnetic electrolyte

A concentration cell is composed of two equivalent half-cells made of the same material but differing in the concentration of reactants. As these concentrations equilibrate, the increase in entropy is converted into a flow of electricity with the voltage output determined by the Nernst equation and proportional to the logarithm of the concentration ratios. However, as diffusion constantly strives to erase all concentration gradients, concentration cells produce only moderate voltages (typically tens of millivolts at room temperature) over relatively short times and, consequently, such devices have not been regarded as promising for energy storage. Here, we report a concentration cell that produces significantly higher voltages (∼ 0.5 V) for over 100 h. The key to our design is that the citric acid molecules involved in the electrode reactions are tethered onto magnetic nanoparticles, and a sharp gradient (10(7)-10(11) anode/cathode concentration ratio) is maintained at one of the electrodes by a permanent magnet external to the cell. Our cell does not result in corrosion of the electrodes, produces no harmful by-products, and can be regenerated by recoating used nanoparticles with fresh citric acid. We show that a series of such centimetre-sized cells produces enough electricity to power small electronic devices (timers and calculators) for several tens of hours. Our results illustrate how redox-active molecules that are, in themselves, non-magnetic can be effectively concentrated by magnetic fields to produce electrical energy.

Effect of monoglyceride structure and cholesterol content on water permeability of the droplet bilayer

The process of water permeation across lipid membranes has significant implications for cellular physiology and homeostasis, and its study may lead to a greater understanding of the relationship between the structure of lipid bilayer and the role that lipid structure plays in water permeation. In this study, we formed a droplet interface bilayer (DIB) by contacting two aqueous droplets together in an immiscible solvent (squalane) containing bilayer-forming surfactant (monoglycerides). Using the DIB model, we present our results on osmotic water permeabilities and activation energy for water permeation of an associated series of unsaturated monoglycerides as the principal component of droplet bilayers, each having the same chain length but differing in the position and number of double bonds, in the absence and presence of a varying concentration of cholesterol. Our findings suggest that the tailgroup structure in a series of monoglyceride bilayers is seen to affect the permeability and activation energy for the water permeation process. Moreover, we have also established the insertion of cholesterol into the droplet bilayer, and have detected its presence via its effect on water permeability. The effect of cholesterol differs depending on the type of monoglyceride. We demonstrate that the DIB can be employed as a convenient model membrane to rapidly explore subtle structural effects on bilayer water permeability.

Asymmetric ion transport through ion-channel-mimetic solid-state nanopores

Both scientists and engineers are interested in the design and fabrication of synthetic nanofluidic architectures that mimic the gating functions of biological ion channels. The effort to build such structures requires interdisciplinary efforts at the intersection of chemistry, materials science, and nanotechnology. Biological ion channels and synthetic nanofluidic devices have some structural and chemical similarities, and therefore, they share some common features in regulating the traverse ionic flow. In the past decade, researchers have identified two asymmetric ion transport phenomena in synthetic nanofluidic structures, the rectified ionic current and the net diffusion current. The rectified ionic current is a diode-like current-voltage response that occurs when switching the voltage bias. This phenomenon indicates a preferential direction of transport in the nanofluidic system. The net diffusion current occurs as a direct product of charge selectivity and is generated from the asymmetric diffusion through charged nanofluidic channels. These new ion transport phenomena and the elaborate structures that occur in biology have inspired us to build functional nanofluidic devices for both fundamental research and practical applications. In this Account, we review our recent progress in the design and fabrication of biomimetic solid-state nanofluidic devices with asymmetric ion transport behavior. We demonstrate the origin of the rectified ionic current and the net diffusion current. We also identify several influential factors and discuss how to build these asymmetric features into nanofluidic systems by controlling (1) nanopore geometry, (2) surface charge distribution, (3) chemical composition, (4) channel wall wettability, (5) environmental pH, (6) electrolyte concentration gradient, and (7) ion mobility. In the case of the first four features, we build these asymmetric features directly into the nanofluidic structures. With the final three, we construct different environmental conditions in the electrolyte solutions on either side of the nanochannel. The novel and well-controlled nanofluidic phenomena have become the foundation for many promising applications, and we have highlighted several representative examples. Inspired by the electrogenic cell of the electric eel, we have demonstrated a proof-of-concept nanofluidic reverse electrodialysis system (NREDS) that converts salinity gradient energy into electricity by means of net diffusion current. We have also constructed chirality analysis systems into nanofluidic architectures and monitored these sensing events as the change in the degree of ionic current rectification. Moreover, we have developed a biohybrid nanosystem, in which we reconstituted the F0F1-ATPase on a liposome-coated, solid-state nanoporous membrane. By applying a transmembrane proton concentration gradient, the biohybrid nanodevice can synthesize ATP in vitro. These findings have improved our understanding of the asymmetric ion transport phenomena in synthetic nanofluidic systems and offer innovative insights into the design of functional nanofluidic devices.

Bio-inspired two-dimensional nanofluidic generators based on a layered graphene hydrogel membrane

An electrogenetic layered graphene hydrogel membrane (GHM) possesses ultra-large interlayer spacing of about 10 nm, forming charged 2D nanocapillaries between graphene sheets that selectively permeate counter-ions and exclude co-ions. When an electrolyte flow goes through the GHM, it functions as an integrated 2D nanofluidic generator converting hydraulic motion into electricity. The maximum streaming conductance density approaches 16.8 μA cm(-2) bar(-1) .

A tissue-like printed material

Living cells communicate and cooperate to produce the emergent properties of tissues. Synthetic mimics of cells, such as liposomes, are typically incapable of cooperation and therefore cannot readily display sophisticated collective behavior. We printed tens of thousands of picoliter aqueous droplets that become joined by single lipid bilayers to form a cohesive material with cooperating compartments. Three-dimensional structures can be built with heterologous droplets in software-defined arrangements. The droplet networks can be functionalized with membrane proteins; for example, to allow rapid electrical communication along a specific path. The networks can also be programmed by osmolarity gradients to fold into otherwise unattainable designed structures. Printed droplet networks might be interfaced with tissues, used as tissue engineering substrates, or developed as mimics of living tissue.

Electric field modulation of the membrane potential in solid-state ion channels

Biological ion channels are molecular devices that allow a rapid flow of ions across the cell membrane. Normal physiological functions, such as generating action potentials for cell-to-cell communication, are highly dependent on ion channels that can open and close in response to external stimuli for regulating ion permeation. Mimicking these biological functions using synthetic structures is a rapidly progressing yet challenging area. Here we report the electric field modulation of the membrane potential phenomena in mechanically and chemically robust solid-state ion channels, an abiotic analogue to the voltage-gated ion channels in living systems. To understand the complex physicochemical processes in the electric field regulated membrane potential behavior, both quasi-static and transient characteristics of converting transmembrane ion gradients into electric potential are investigated. It is found that the transmembrane potential can be adequately tuned by an external electrical stimulation, thanks to the unique properties of the voltage-regulated selective ion transport through a nanoscale channel.

The origins of life: old problems, new chemistries

Synthetic life: the origin of life on the early Earth, and the ex novo transition of non-living matter to artificial living systems are deep scientific challenges that provide a context for the development of new chemistries with unknown technological consequences. This Essay attempts to re-frame some of the epistemological difficulties associated with these questions into an integrative framework of proto-life science. Chemistry is at the heart of this endeavour.

Towards an artificial cell

We are on the verge of producing "synthetic cells," or protocells, in which some, many or all of the tasks of a real biological cell are harnessed into a synthetic platform. Such advances are made possible through genetic engineering, microfabrication technologies, and the development of cellular membranes from new surfactants that extend beyond phospholipids in stability and chemical control, and can be used to introduce designer functionality into membranes and cells. We review some of the recent advances in the development of synthetic cells and suggest future exciting directions.

Droplet shape analysis and permeability studies in droplet lipid bilayers

We apply optical manipulation to prepare lipid bilayers between pairs of water droplets immersed in an oil matrix. These droplet pairs have a well-defined geometry allowing the use of droplet shape analysis to perform quantitative studies of the dynamics during bilayer formation and to determine time-dependent values for the droplet volumes, bilayer radius, bilayer contact angle, and droplet center-line approach velocity. During bilayer formation, the contact angle rises steadily to an equilibrium value determined by the bilayer adhesion energy. When there is a salt concentration imbalance between droplets, there is a measurable change in the droplet volume. We present an analytical expression for this volume change and use this expression to calculate the bilayer permeability to water.

Light and pH cooperative nanofluidic diode using a spiropyran-functionalized single nanochannel

An artificial nanofluidic diode system is prepared, mimicking the light-gated and pH-tunable ion channels that play an important role in life sciences. When UV light is off, the nanochannel is in the closed state, analogous to a resistance. Under UV light irradiation and at pH 7, the current flows from the tip to the base, analogous to a diode; at pH 3, the situation (and the diode) is reversed.

Synthetic biology: an emerging research field in China

Synthetic biology is considered as an emerging research field that will bring new opportunities to biotechnology. There is an expectation that synthetic biology will not only enhance knowledge in basic science, but will also have great potential for practical applications. Synthetic biology is still in an early developmental stage in China. We provide here a review of current Chinese research activities in synthetic biology and its different subfields, such as research on genetic circuits, minimal genomes, chemical synthetic biology, protocells and DNA synthesis, using literature reviews and personal communications with Chinese researchers. To meet the increasing demand for a sustainable development, research on genetic circuits to harness biomass is the most pursed research within Chinese researchers. The environmental concerns are driven force of research on the genetic circuits for bioremediation. The research on minimal genomes is carried on identifying the smallest number of genomes needed for engineering minimal cell factories and research on chemical synthetic biology is focused on artificial proteins and expanded genetic code. The research on protocells is more in combination with the research on molecular-scale motors. The research on DNA synthesis and its commercialisation are also reviewed. As for the perspective on potential future Chinese R&D activities, it will be discussed based on the research capacity and governmental policy.

Engineering Polymersome Protocells

The field of biomimicry is embracing the construction of complex assemblies that imitate both biological structure and function. Advancements in the design of these mimetics have generated a growing vision for creating an artificial or proto- cell. Polymersomes are vesicles that can be made from synthetic, biological or hybrid polymers and can be used as a model template to build cell-like structures. In this perspective, we discuss various areas where polymersomes have been used to mimic cell functions as well as areas in which the synthetic flexibility of polymersomes would make them ideal candidates for a biomembrane mimetic. Designing a polymersome that comprehensively displays the behaviors discussed herein has the potential to lead to the development of an autonomous, responsive particle that resembles the intelligence of a biological cell.

Synthetic toxicology: where engineering meets biology and toxicology

This article examines the implications of synthetic biology (SB) for toxicological sciences. Starting with a working definition of SB, we describe its current subfields, namely, DNA synthesis, the engineering of DNA-based biological circuits, minimal genome research, attempts to construct protocells and synthetic cells, and efforts to diversify the biochemistry of life through xenobiology. Based on the most important techniques, tools, and expected applications in SB, we describe the ramifications of SB for toxicology under the label of synthetic toxicology. We differentiate between cases where SB offers opportunities for toxicology and where SB poses challenges for toxicology. Among the opportunities, we identified the assistance of SB to construct novel toxicity testing platforms, define new toxicity-pathway assays, explore the potential of SB to improve in vivo biotransformation of toxins, present novel biosensors developed by SB for environmental toxicology, discuss cell-free protein synthesis of toxins, reflect on the contribution to toxic use reduction, and the democratization of toxicology through do-it-yourself biology. Among the identified challenges for toxicology, we identify synthetic toxins and novel xenobiotics, biosecurity and dual-use considerations, the potential bridging of toxic substances and infectious agents, and do-it-yourself toxin production.

Applications of biological pores in nanomedicine, sensing, and nanoelectronics

Biological protein pores and pore-forming peptides can generate a pathway for the flux of ions and other charged or polar molecules across cellular membranes. In nature, these nanopores have diverse and essential functions that range from maintaining cell homeostasis and participating in cell signaling to activating or killing cells. The combination of the nanoscale dimensions and sophisticated - often regulated - functionality of these biological pores make them particularly attractive for the growing field of nanobiotechnology. Applications range from single-molecule sensing to drug delivery and targeted killing of malignant cells. Potential future applications may include the use of nanopores for single strand DNA sequencing and for generating bio-inspired, and possibly, biocompatible visual detection systems and batteries. This article reviews the current state of applications of pore-forming peptides and proteins in nanomedicine, sensing, and nanoelectronics.