Double-walled carbon nanotube processing

Carbonaceous materials in structural dimensions for advanced oxidation processes

Carbonaceous materials have attracted extensive research and application interests in water treatment owing to their advantageous structural and physicochemical properties. Despite the significant interest and ongoing debates on the mechanisms through which carbonaceous materials facilitate advanced oxidation processes (AOPs), a systematic summary of carbon materials across all dimensions (0D-3D nanocarbon to bulk carbon) in various AOP systems remains absent. Addressing this gap, the current review presents a comprehensive analysis of various carbon/oxidant systems, exploring carbon quantum dots (0D), nanodiamonds (0D), carbon nanotubes (1D), graphene derivatives (2D), nanoporous carbon (3D), and biochar (bulk 3D), across different oxidant systems: persulfates (peroxymonosulfate/peroxydisulfate), ozone, hydrogen peroxide, and high-valent metals (Mn(VII)/Fe(VI)). Our discussion is anchored on the identification of active sites and elucidation of catalytic mechanisms, spanning both radical and nonradical pathways. By dissecting catalysis-related factors such as sp2/sp3 C, defects, and surface functional groups that include heteroatoms and oxygen groups in different carbon configurations, this review aims to provide a holistic understanding of the catalytic nature of different dimensional carbonaceous materials in AOPs. Furthermore, we address current challenges and underscore the potential for optimizing and innovating water treatment methodologies through the strategic application of carbon-based catalysts. Finally, prospects for future investigations and the associated bottlenecks are proposed.

Naturally Occurring Allotropes of Carbon

Carbon is one of the most important chemical elements, forming a wide range of important allotropes, ranging from diamond over graphite to nanostructural materials such as graphene, fullerenes, and carbon nanotubes (CNTs). Especially these nanomaterials play an important role in technology and are commonly formed in laborious synthetic processes that often are of high energy demand. Recently, fullerenes and their building blocks (buckybowls) have been found in natural fossil materials formed under geological conditions. The question arises of how diverse nature can be in forming different types of natural allotropes of carbon. This is investigated here, using modern analytical methods such as ultrahigh-resolution mass spectrometry and transmission electron microscopy, which facilitate a detailed understanding of the diversity of natural carbon allotropes. Large fullerenes, fullertubes, graphene sheets, and double- and multiwalled CNTs together with single-walled CNTs were detected in natural heavy fossil materials while theoretical calculations on the B3LYP/6-31G(d) level of theory using the ORCA software package support the findings.

Fabrication of a Co-Mo-Based Metal-Organic Framework for Growth of Double-Walled Carbon Nanotubes

Double-walled carbon nanotubes (DWCNTs) make up a unique class of carbon nanotubes (CNTs) that are particularly intriguing for scientific research and are promising candidates for technological applications. A more precise level of control and greater yields can be achieved via catalytic chemical vapor deposition (CCVD), which involves the breakdown of a carbonaceous gas over nanoparticles. The addition of molybdenum to the system can increase the selectivity with regard to the number of walls that exist in the obtained CNTs. As reported herein, we have designed and synthesized a novel Co-Mo-MOF, [Co(3-bpta)1.5(MoO4)]·H2O (where 3-bpta = N,N'-bis(3-pyridyl)terephthalamide), and employed the Co-Mo-MOF as a bimetallic catalyst precursor for the CCVD approach to prepare high-quality DWCNTs. The Co-Mo-MOF was employed after being calcined in N2 and H2 at 1100 °C and decomposing into CoO, CoMoO4, and MoO3. Existing CoMoO4 is unaltered after reduction in H2 at 1100 °C, while CoO and MoO3 are converted into Co0 and MoO2, and more CoMoO4 is created at the expense of Co0 and MoO2 without clearly defining agglomeration. Finally, the interaction between metallic Co particles and C2H4 is what initiates the formation of DWCNTs. In-depth discussion is provided in this paper regarding the mechanism underlying the high selectivity and activity of Co-Mo catalysts in regulating the development and structure of DWCNTs. The DWCNTs also offer excellence performance when they are used as water purification agents and as selective sorbents. This work opens a feasible way to use MOFs as a way to produce MWCNTs, thus blazing a new trail in the field of MOF-derived carbon-based materials.

3D Printing of Electron/Ion-Flux Dual-Gradient Anodes for Dendrite-Free Zinc Batteries

3D porous Zn-metal anodes have aroused widespread interest for Zn-ion batteries (ZIBs). Nevertheless, the notorious "top-growth" dendrites caused by the intrinsic top-concentrated ions and randomly distributed electrons may ultimately trigger a cell failure. Herein, an electron/ion-flux dual-gradient 3D porous Zn anode is reported for dendrite-free ZIBs by adopting 3D printing technology. The 3D-printed Zn anode with layer-by-layer bottom-up attenuating Ag nanoparticles (3DP-BU@Zn) establishes dual-gradient electron/ion fluxes, i.e., an internal bottom-up gradient electron flux created by bottom-rich conductive Ag nanoparticles, and a gradient ion flux resulting from zincophilic Ag nanoparticles which pump ions toward the bottom. Meanwhile, the 3D-printing-enabled hierarchical porous structure and continuously conducting network endow unimpeded electron transfer and ion diffusion among the electrode, dominating a bottom-preferential Zn deposition behavior. As a result, the 3DP-BU@Zn symmetrical cell affords highly reversible Zn plating/stripping with an extremely small voltage hysteresis of 17.7 mV and a superior lifespan over 630 h at 1 mA cm^-2 and 1 mAh cm^-2 . Meanwhile, the 3DP-BU@Zn//VO₂ full cell exhibits remarkable cyclic stability over 500 cycles. This unique dual-gradient strategy sheds light on the roadmap for the next-generation safe and durable Zn-metal batteries.

Metallocene-Filled Single-Walled Carbon Nanotube Hybrids

In this paper, the growth mechanism, structure, growth processes, growth kinetics, and optical, vibronic and electronic properties of metallocene-filled single-walled carbon nanotubes (SWCNTs) are considered. A description of the procedures used to fill the nanotubes is provided. An investigation of doping effects on metallicity-mixed SWCNTs filled with metallocenes by Raman spectroscopy, near edge X-ray absorption fine structure spectroscopy, photoemission spectroscopy, and optical absorption spectroscopy is described. The studies of doping effects on metallicity-sorted SWCNTs filled with metallocenes are discussed. Doping effects in metallicity-mixed and sorted SWCNTs upon the chemical transformation of encapsulated molecules are analyzed. A discussion of the modification of the electronic properties of filled SWCNTs is presented. Applications of metallocene-filled SWCNTs in electrochemistry, thermoelectric power generation, chemical sensors, and magnetic recording are discussed.

Electrochemistry of Carbon Materials: Progress in Raman Spectroscopy, Optical Absorption Spectroscopy, and Applications

This paper is dedicated to the discussion of applications of carbon material in electrochemistry. The paper starts with a general discussion on electrochemical doping. Then, investigations by spectroelectrochemistry are discussed. The Raman spectroscopy experiments in different electrolyte solutions are considered. This includes aqueous solutions and acetonitrile and ionic fluids. The investigation of carbon nanotubes on different substrates is considered. The optical absorption experiments in different electrolyte solutions and substrate materials are discussed. The chemical functionalization of carbon nanotubes is considered. Finally, the application of carbon materials and chemically functionalized carbon nanotubes in batteries, supercapacitors, sensors, and nanoelectronic devices is presented.

Phemenology of Filling, Investigation of Growth Kinetics and Electronic Properties for Applications of Filled Single-Walled Carbon Nanotubes

This review discusses the phemenology of filling, the investigation of kinetics, and the electronic properties for applications of filled single-walled carbon nanotubes (SWCNTs), and summarizes five main achievements that were obtained in processing the spectroscopic data of SWCNTs filled with metal halogenide, metal chalcogenide, metal and metallocenes. First, the methods of processing kinetic data were developed to reveal precise trends in growth rates and activation energies of the growth of SWCNTs. Second, the metal-dependence of kinetics was revealed. Third, metallicity-sorted (metallic and semiconducting) SWCNTs were filled with a range of substances and the electronic properties were investigated. Fourth, new approaches to processing the data of spectroscopic investigations of filled SWCNTs were developed, which allowed more reliable and precise analysis of the experimental results. Fifth, the correlation between the physical and chemical properties of encapsulated substances and the electronic properties of SWCNTs were elucidated. These points are highlighted in the review.

Metal and Metal Halogenide-Filled Single-Walled Carbon Nanotubes: Kinetics, Electronic Properties, Engineering the Fermi Level

Here, we present a review of the major achievements in kinetics, electronic properties, and engineering in the Fermi level of single-walled carbon nanotubes (SWCNTs). Firstly, the kinetics of metal-filled SWCNTs were revealed with precision over several minutes. Secondly, the growth rates of nanotubes were calculated. Thirdly, the activation energies of nanotubes were measured. Fourthly, the methods of the quantitative analysis of the doping level were developed. Indeed, only qualitative analysis has been previously performed. The quantitative analysis allowed us to obtain quantitative data on charge transfer. Fifthly, the correlation between the physical properties, chemical properties, electronic properties of SWCNTs was elucidated.

Efficient Inner-to-Outer Wall Energy Transfer in Highly Pure Double-Wall Carbon Nanotubes Revealed by Detailed Spectroscopy

The coaxial stacking of two single-wall carbon nanotubes (SWCNTs) into a double-wall carbon nanotube (DWCNT), forming a so-called one-dimensional van der Waals structure, leads to synergetic effects that dramatically affect the optical and electronic properties of both layers. In this work, we explore these effects in purified DWCNT samples by combining absorption, wavelength-dependent infrared fluorescence-excitation (PLE), and wavelength-dependent resonant Raman scattering (RRS) spectroscopy. Purified DWCNTs are obtained by careful solubilization that strictly avoids ultrasonication or by electronic-type sorting, both followed by a density gradient ultracentrifugation to remove unwanted SWCNTs that could obscure the DWCNT characterization. Chirality-dependent shifts of the radial breathing mode vibrational frequencies and transition energies of the inner and outer DWCNT walls with respect to their SWCNT analogues are determined by advanced two-dimensional fitting of RRS and PLE data of DWCNT and their reference SWCNT samples. This exhaustive data set verifies that fluorescence from the inner DWCNT walls of well-purified samples is severely quenched through efficient energy transfer from the inner to the outer DWCNT walls. Combined analysis of the PLE and RRS results further reveals that this transfer is dependent on the inner and outer wall chirality, and we identify the specific combinations dominant in our DWCNT samples. These obtained results demonstrate the necessity and value of a combined structural characterization approach including PLE and RRS spectroscopy for bulk DWCNT samples.

Interlayer Interactions in 1D Van der Waals Moiré Superlattices

Studying two-dimensional (2D) van der Waals (vdW) moiré superlattices and their interlayer interactions have received surging attention after recent discoveries of many new phases of matter that are highly tunable. Different atomistic registry between layers forming the inner and outer nanotubes can also form one-dimensional (1D) vdW moiré superlattices. In this review, experimental observations and theoretical perspectives related to interlayer interactions in 1D vdW moiré superlattices are summarized. The discussion focuses on double-walled carbon nanotubes (DWNTs), a model 1D vdW moiré system, and the authors highlight the new optical features emerging from the non-trivial strong interlayer coupling effect and the unique physics in 1D DWNTs. Future directions and questions in probing the intriguing physical phenomena in 1D vdW moiré superlattices such as, correlated physics in different 1D moiré systems beyond DWNTs are proposed and discussed.

Spectroscopy of Filled Single-Walled Carbon Nanotubes

Many envisaged applications, such as nanoelectronics, photovoltaics, thermoelectric power generation, light-emission devices, energy storage and biomedicine, necessitate single-walled carbon nanotube (SWCNT) samples with specific uniform electronic properties. The precise investigation of the electronic properties of filled SWCNTs on a qualitative and quantitative level is conducted by optical absorption spectroscopy, Raman spectroscopy, photoemission spectroscopy and X-ray absorption spectroscopy. This review is dedicated to the description of the spectroscopic methods for the analysis of the electronic properties of filled SWCNTs. The basic principle and main features of SWCNTs as well as signatures of doping-induced modifications of the spectra of filled SWCNTs are discussed.

A Meta-Analysis of Conductive and Strong Carbon Nanotube Materials

A study of 1304 data points collated over 266 papers statistically evaluates the relationships between carbon nanotube (CNT) material characteristics, including: electrical, mechanical, and thermal properties; ampacity; density; purity; microstructure alignment; molecular dimensions and graphitic perfection; and doping. Compared to conductive polymers and graphitic intercalation compounds, which have exceeded the electrical conductivity of copper, CNT materials are currently one-sixth of copper's conductivity, mechanically on-par with synthetic or carbon fibers, and exceed all the other materials in terms of a multifunctional metric. Doped, aligned few-wall CNTs (FWCNTs) are the most superior CNT category; from this, the acid-spun fiber subset are the most conductive, and the subset of fibers directly spun from floating catalyst chemical vapor deposition are strongest on a weight basis. The thermal conductivity of multiwall CNT material rivals that of FWCNT materials. Ampacity follows a diameter-dependent power-law from nanometer to millimeter scales. Undoped, aligned FWCNT material reaches the intrinsic conductivity of CNT bundles and single-crystal graphite, illustrating an intrinsic limit requiring doping for copper-level conductivities. Comparing an assembly of CNTs (forming mesoscopic bundles, then macroscopic material) to an assembly of graphene (forming single-crystal graphite crystallites, then carbon fiber), the ≈1 µm room-temperature, phonon-limited mean-free-path shared between graphene, metallic CNTs, and activated semiconducting CNTs is highlighted, deemphasizing all metallic helicities for CNT power transmission applications.

Nanotube-Based 1D Heterostructures Coupled by van der Waals Forces

1D van der Waals heterostructures based on carbon nanotube templates are raising a lot of excitement due to the possibility of creating new optical and electronic properties, by either confining molecules inside their hollow core or by adding layers on the outside of the nanotube. In contrast to their 2D analogs, where the number of layers, atomic type and relative orientation of the constituting layers are the main parameters defining physical properties, 1D heterostructures provide an additional degree of freedom, i.e., their specific diameter and chiral structure, for engineering their characteristics. The current state-of-the-art in synthesizing 1D heterostructures are discussed here, in particular focusing on their resulting optical properties, and details the vast parameter space that can be used to design heterostructures with custom-built properties that can be integrated into a large variety of applications. First, the effects of van der Waals coupling on the properties of the simplest and best-studied 1D heterostructure, namely a double-walled carbon nanotube, are described, and then heterostructures built from the inside and the outside are considered, which all use a nanotube as a template, and, finally, an outlook is provided for the future of this research field.

Separation of Specific Single-Enantiomer Single-Wall Carbon Nanotubes in the Large-Diameter Regime

The enantiomer-level isolation of single-walled carbon nanotubes (SWCNTs) in high concentration and with high purity for nanotubes greater than 1.1 nm in diameter is demonstrated using a two-stage aqueous two-phase extraction (ATPE) technique. In total, five different nanotube species of ∼1.41 nm diameter are isolated, including both metallics and semiconductors. We characterize these populations by absorbance spectroscopy, circular dichroism spectroscopy, resonance Raman spectroscopy, and photoluminescence mapping, revealing and substantiating mod-dependent optical dependencies. Using knowledge of the competitive adsorption of surfactants to the SWCNTs that controls partitioning within the ATPE separation, we describe an advanced acid addition methodology that enables the fine control of the separation of these select nanotubes. Furthermore, we show that endohedral filling is a previously unrecognized but important factor to ensure a homogeneous starting material and further enhance the separation yield, with the best results for alkane-filled SWCNTs, followed by empty SWCNTs, with the intrinsic inhomogeneity of water-filled SWCNTs causing them to be worse for separations. Lastly, we demonstrate the potential use of these nanotubes in field-effect transistors.

Nanoscale Patterning of Carbon Nanotubes: Techniques, Applications, and Future

Carbon nanotube (CNT) devices and electronics are achieving maturity and directly competing or surpassing devices that use conventional materials. CNTs have demonstrated ballistic conduction, minimal scaling effects, high current capacity, low power requirements, and excellent optical/photonic properties; making them the ideal candidate for a new material to replace conventional materials in next-generation electronic and photonic systems. CNTs also demonstrate high stability and flexibility, allowing them to be used in flexible, printable, and/or biocompatible electronics. However, a major challenge to fully commercialize these devices is the scalable placement of CNTs into desired micro/nanopatterns and architectures to translate the superior properties of CNTs into macroscale devices. Precise and high throughput patterning becomes increasingly difficult at nanoscale resolution, but it is essential to fully realize the benefits of CNTs. The relatively long, high aspect ratio structures of CNTs must be preserved to maintain their functionalities, consequently making them more difficult to pattern than conventional materials like metals and polymers. This review comprehensively explores the recent development of innovative CNT patterning techniques with nanoscale lateral resolution. Each technique is critically analyzed and applications for the nanoscale-resolution approaches are demonstrated. Promising techniques and the challenges ahead for future devices and applications are discussed.

Poly(3,4-Ethylenedioxythiophene) Nanoparticles as Building Blocks for Hybrid Thermoelectric Flexible Films

Hybrid thermoelectric flexible films based on poly(3,4-ethylenedioxythiophene) (PEDOT) nanoparticles and carbon nanotubes were prepared by using layer-by-layer (LbL) assembly. The employed PEDOT nanoparticles were synthesized by oxidative miniemulsion polymerization by using iron(III) p-toluenesulfonate hexahydrate (FeTos) as an oxidant and poly(diallyldimethylammonium chloride) (PDADMAC) as stabilizer. Sodium deoxycholate (DOC) was used as a stabilizer to prepare the aqueous dispersions of the carbon nanotubes. Hybrid thermoelectric films were finally prepared with different monomer/oxidant molar ratios and different types of carbon nanotubes, aiming to maximize the power factor (PF). The use of single-wall (SWCNT), double-wall (DWCNT), and multiwall (MWCNT) carbon nanotubes was compared. The Seebeck coefficient was measured by applying a temperature difference between the ends of the film and the electrical conductivity was measured by the Van der Pauw method. The best hybrid film in this study exhibited a PF of 72 µW m−1K−2. These films are prepared from aqueous dispersions with relatively low-cost materials and, due to lightweight and flexible properties, they are potentially good candidates to recover waste heat in wearable electronic applications.

Bidirectional charge-transfer behavior in carbon-based hybrid nanomaterials

In recent years there has been a growing interest in finding materials revealing bidirectional charge-transfer characteristics, that is, materials behaving as an electron donor or an acceptor in the presence of redox and photoactive addends, for optoelectronic applications. In this respect, carbon-based nanostructures, such as graphene and carbon nanotubes, have emerged as promising nanomaterials for the development of hybrid systems for bidirectional charge transfer, whose behaviour can be switched from donor-type to acceptor-type by simply changing the electroactive counterpart to which they are anchored. In this review we provide an overview of the main advances that have been made over the past few years in carbon-based hybrid architectures involving different types of carbon nanostructures and photosensitizers. In particular, carbon nanotube and graphene-based hybrid systems will be highlighted.

Physically Close yet Chemically Separate Reduction and Oxidation Sites in Double-Walled Nanotubes for Photocatalytic Hydrogen Generation

The localization of photoexcitation leads to the proximity of photocatalytic reduction and oxidation sites, causing unfavorable side reactions. To address this issue, we designed a double-walled nanotube model system consisting of carbon nanotube (CNT) outside and carbon-nitride nanotube (CNNT) inside, with physically close yet chemically separate reduction and oxidation sites for safe photocatalytic hydrogen generation. First-principle calculations show that photoexcited charges in the system rapidly separate, leaving electrons at the reductive sites in CNNT and holes at the oxidative sites in CNT, respectively. Then protons generated by hole-assisted water dissociation at the CNT migrate to the CNNT and are reduced, producing H₂. The selective permeability of protons through CNT ensures complete separation of hydrogen molecules and oxygen species, and thereby the reduction and oxidation half-reactions. Further, H₂ products can be delivered via the double-walled nanotube for safe collection. The seamless integration of photocatalytic hydrogen generation and delivery in one system provides an alternative solution toward practical solar-driven hydrogen utilization.

Snow-Ice-Inspired Approach for Growth of Amorphous Silicon Nanotips

The growth of one-dimensional nanostructures without a metal catalyst via a simple solution method is of considerable interest due to its practical applications. In this study, the growth of amorphous silicon (a-Si) nanotips was investigated using an aqueous solution dropped onto the Si substrate, followed by drying at room temperature or below for 24 h, resulting in the formation of a-Si nanotips on the Si substrate. Typically, the a-Si nanotips were up to 1.6 μm long, with average top and middle diameters of 30 and 80 nm, respectively, and contained no metal catalyst in their structure. The growth of a-Si nanotips can be explained in terms of the liquid-solid mechanism, where the supercritical Si solution (liquid) generated on the Si substrate (after reaction with the aqueous solution) promotes the nucleation of solid Si (acting as seeds) on the roughened surface, followed by surface diffusion of Si atoms along the side wall of the Si seeds. This is very similar to the phenomenon observed in the growth of snow ice crystals in nature. When photoexcited at 265 nm, the a-Si nanotips showed blue luminescence at around 435 nm (2.85 eV), indicating feasible applicability of the nanotips in optoelectronic functional devices.

Synthesis of outer tube-selectively nitrogen-doped double-walled carbon nanotubes by nitrogen plasma treatment

We demonstrate selective nitrogen doping on the outer tubes of double walled carbon nanotubes by nitrogen plasma treatment. Such selectivity improves the chemical activity of the outer tubes, including their wettability and oxygen reduction reaction properties, while retaining the structural, optical, and electrical properties of the inner tubes.

Biomedical applications of carbon nanomaterials: Drug and gene delivery potentials

One of the major components in the development of nanomedicines is the choice of the right biomaterial, which notably determines the subsequent biological responses. The popularity of carbon nanomaterials (CNMs) has been on the rise due to their numerous applications in the fields of drug delivery, bioimaging, tissue engineering, and biosensing. Owing to their considerably high surface area, multifunctional surface chemistry, and excellent optical activity, novel functionalized CNMs possess efficient drug-loading capacity, biocompatibility, and lack of immunogenicity. Over the past few decades, several advances have been made on the functionalization of CNMs to minimize their health concerns and enhance their biosafety. Recent evidence has also implied that CNMs can be functionalized with bioactive peptides, proteins, nucleic acids, and drugs to achieve composites with remarkably low toxicity and high pharmaceutical efficiency. This review focuses on the three main classes of CNMs, including fullerenes, graphenes, and carbon nanotubes, and their recent biomedical applications.

An intrinsic energy conversion mechanism via telescopic extension and retraction of concentric carbon nanotubes

The conversion of other forms of energy into mechanical work through the geometrical extension and retraction of nanomaterials has a wide variety of potential applications, including for mimicking biomotors. Here, using molecular dynamics simulations, we demonstrate that there exists an intrinsic energy conversion mechanism between thermal energy and mechanical work in the telescopic motions of double-walled carbon nanotubes (DWCNTs). A DWCNT can inherently convert heat into mechanical work in its telescopic extension process, while convert mechanical energy into heat in its telescopic retraction process. These two processes are nearly thermodynamically reversible. The underlying mechanism for this energy conversion is that the configurational entropy changes with the telescopic overlapping length of concentric individual tubes. We also find that the entropy effect enlarges with the decreasing intertube space of DWCNTs. As a result, the spontaneous telescopic motion of a condensed DWCNT can be switched to extrusion by increasing the system temperature above a critical value. These findings are important for fundamentally understanding the mechanical behavior of concentric nanotubes, and may have general implications in the application of DWCNTs as linear motors in nanodevices.

Carbon-Nanotube-Based Thermoelectric Materials and Devices

Conversion of waste heat to voltage has the potential to significantly reduce the carbon footprint of a number of critical energy sectors, such as the transportation and electricity-generation sectors, and manufacturing processes. Thermal energy is also an abundant low-flux source that can be harnessed to power portable/wearable electronic devices and critical components in remote off-grid locations. As such, a number of different inorganic and organic materials are being explored for their potential in thermoelectric-energy-harvesting devices. Carbon-based thermoelectric materials are particularly attractive due to their use of nontoxic, abundant source-materials, their amenability to high-throughput solution-phase fabrication routes, and the high specific energy (i.e., W g^-1 ) enabled by their low mass. Single-walled carbon nanotubes (SWCNTs) represent a unique 1D carbon allotrope with structural, electrical, and thermal properties that enable efficient thermoelectric-energy conversion. Here, the progress made toward understanding the fundamental thermoelectric properties of SWCNTs, nanotube-based composites, and thermoelectric devices prepared from these materials is reviewed in detail. This progress illuminates the tremendous potential that carbon-nanotube-based materials and composites have for producing high-performance next-generation devices for thermoelectric-energy harvesting.

Inner- and outer-wall sorting of double-walled carbon nanotubes

Double-walled carbon nanotubes (DWCNTs) consist of two coaxially aligned single-walled carbon nanotubes (SWCNTs), and previous sorting methods only achieved outer-wall electronic-type selectivity. Here, a separation technique capable of sorting DWCNTs by semiconducting (S) or metallic (M) inner- and outer-wall electronic type is presented. Electronic coupling between the inner and outer wall is used to alter the surfactant coating around each of the DWCNT types, and aqueous gel permeation is used to separate them. Aqueous methods are used to remove SWCNT species from the raw material and prepare enriched DWCNT fractions. The enriched DWCNT fractions are then transferred into either chlorobenzene or toluene using the copolymer PFO-BPy to yield the four inner@outer combinations of M@M, M@S, S@M and S@S. The high purity of the resulting fractions is verified by absorption measurements, transmission electron microscopy, atomic force microscopy, resonance Raman mapping and high-density field-effect transistor devices.

Effect of the fluorination technique on the surface-fluorination patterning of double-walled carbon nanotubes

Double-walled carbon nanotubes (DWCNTs) are fluorinated using (1) fluorine F₂ at 200 °C, (2) gaseous BrF₃ at room temperature, and (3) CF₄ radio-frequency plasma functionalization. These have been comparatively studied using transmission electron microscopy and infrared, Raman, X-ray photoelectron, and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. A formation of covalent C-F bonds and a considerable reduction in the intensity of radial breathing modes from the outer shells of DWCNTs are observed for all samples. Differences in the electronic state of fluorine and the C-F vibrations for three kinds of the fluorinated DWCNTs are attributed to distinct local surroundings of the attached fluorine atoms. Possible fluorine patterns realized through a certain fluorination technique are revealed from comparison of experimental NEXAFS F K-edge spectra with quantum-chemical calculations of various models. It is proposed that fluorination with F₂ and BrF₃ produces small fully fluorinated areas and short fluorinated chains, respectively, while the treatment with CF₄ plasma results in various attached species, including single or paired fluorine atoms and -CF₃ groups. The results demonstrate a possibility of different patterning of carbon surfaces through choosing the fluorination method.

Photocurrent spectroscopy of dye-sensitized carbon nanotubes

Monochiral (7,5) single walled carbon nanotubes (SWCNTs) are integrated into a field effect transistor device in which the built-in electric field at the nanotube/metal contact allows for exciton separation under illumination. Variable wavelength spectroscopy and 2D surface mapping of devices consisting of 10-20 nanotubes are performed in the visible region and a strong correlation between the nanotube's second optical transition (S₂₂) and the photocurrent is found. After integration, the SWCNTs are non-covalently modified with three different fluorescent dye molecules with off-resonant absorption maxima at 532 nm, 565 nm, and 610 nm. The dyes extend the absorption properties of the nanotube and contribute to the photocurrent. This approach holds promise for the development of photo-detectors and for applications in photovoltaics and biosensing.

Structural Properties of Double-Walled Carbon Nanotubes Driven by Mechanical Interlayer Coupling

Structural identification of double-walled carbon nanotubes (DWNTs) is presented through a robust procedure based on the latest generation of transmission electron microscope, making possible a statistical analysis based on numerous nano-objects. This approach reveals that inner and outer tubes of DWNTs are not randomly oriented, suggesting the existence of a mechanical coupling between the two concentric walls. With the support of atomic-scale modeling, we attribute it to the presence of incommensurate domains whose structures depend on the diameters and helicities of both tubes and where inner tubes try to achieve a local stacking orientation to reduce strain effects.

Laser Lithography of a Tube-in-a-Tube Nanostructure

Carbon nanotubes hold vast potential for device innovations because their optical and electronic properties can be synthetically tailored at a length scale unattainable by lithographic techniques. However, lithographic patterning of carbon nanotubes with electronic-type control remains one of the major problems for the integration of these nanomaterials for practical device applications. In this work, we propose a laser lithography method for direct-write patterning of devices on thin films of outer wall selectively functionalized double-walled carbon nanotubes (Tube^2). This method is enabled by the reversible removal of surface functional groups with a laser tuned into resonance with the inner tube of Tube^2. We show that it is possible to directly create patterned dot arrays and conductive pathways and circuits on insulating Tube^2 thin films by tuning the resonance of the direct-writing laser with the electronic type of the inner tube (i.e., metallic or semiconducting). The successful patterning was unambiguously confirmed with in situ Raman spectral imaging and electrical characterization. This work suggests the possibility of developing a nanostructure-specific nanofabrication technology reminiscent of thermal printing.

Tuning the separation and coupling of corannulene trianion-radicals through sizable alkali metal belts

Downsizing of alkali metal belts sandwiched between triply-reduced corannulene decks allows for the fine-tune separation and magnetic coupling of C₂₀H₁₀˙^3– radicals.

The first heterobimetallic sandwich-type aggregate formed by bowl-shaped corannulene trianion-radicals, C₂₀H₁₀˙^3–, has been synthesized using mixed-metal reduction of C₂₀H₁₀. The product was crystallographically characterized to reveal the self-assembly of [Cs⁺//(C₂₀H₁₀^3–)/4K⁺/(C₂₀H₁₀^3–)//Cs⁺], in which two triply-charged corannulene decks encapsulate a rectangle of four potassium ions (the K···K separations are 4.212(4) and 5.185(4) Å), with the exterior concave bowl cavities being selectively filled by one cesium ion each. In order to provide insights into the geometrical features and electronic structure of this novel mixed-metal organometallic self-assembly, an in-depth theoretical investigation has been carried out. Specifically, the influence of internal metal binding on the geometry and magnetic coupling of C₂₀H₁₀˙^3– radicals is investigated for Group 1 metals. This study reveals that replacement of the sandwiched potassium ions with larger (Cs) and smaller (Li) ions allows variation of the size of the encapsulated metal belts, and thus enables tuning of the coupling of C₂₀H₁₀˙^3– radicals.

Chemical Gating of a Synthetic Tube-in-a-Tube Semiconductor

A critical challenge to translating field effect transistors into biochemical sensor platforms is the requirement of a gate electrode, which imposes restrictions on sensor device architectures and results in added expense, poorer scalability, and electrical noise. Here we show that it is possible to eliminate the need of the physical gate electrode and dielectrics altogether using a synthetic tube-in-a-tube (Tube^∧2) semiconductor. Composed of a semiconducting single-walled carbon nanotube nested in a charged, impermeable covalent functional shell, Tube^∧2 allows the semiconducting conduction pathway to be modulated solely by surface functional groups in a chemically gated-all-around configuration. The removal of physical gates significantly simplifies the device architecture and enables photolithography-free, highly scalable fabrication of transistor sensors in nonconventional configurations that are otherwise impossible. We show that concomitant FET sensitivity and single-mismatch selectivity can be achieved with Tube^∧2 even in a two-terminal, thin film transistor device configuration that is as simple as a chemiresistor. Miniaturized two-terminal field effect point sensors can also be fabricated, using a straightforward dice-and-dip procedure, for the detection of tuberculosis biomarkers.

Separation of double-wall carbon nanotubes by electronic type and diameter

We introduce a new procedure for the efficient isolation and subsequent separation of double-wall carbon nanotubes (DWCNTs). A simplified, rate zonal ultracentrifugation (RZU) process is first applied to obtain samples of highly-enriched DWCNTs from a raw carbon nanotube material that has both single- and double-wall carbon nanotubes. Using this purified DWCNT suspension, we demonstrate for the first time that DWCNTs can be further processed using aqueous two-phase extraction (ATPE) for sequential separation by electronic structure and diameter. Additionally, we introduce analytical ultracentrifugation (AUC) as a new method for DWCNT characterization to assess DWCNT purity in separated samples. Results from AUC analysis are utilized to compare two DWCNT separation schemes. We find that RZU processing followed by sequential bandgap and diameter sorting via ATPE provides samples of highest DWCNT enrichment, whereas single-step redox sorting of the same raw material through ATPE yields SWCNT/DWCNT mixtures of similar diameter and electronic character. The presented methods offer significant advancement in DWCNT processing and separation while also providing a promising alternative for DWCNT sample analysis.

A novel strategy for high-performance transparent conductive films based on double-walled carbon nanotubes

A high concentration of double-walled carbon nanotubes was dispersed by a carbazole-based conjugated polymer.

Enhancement of organic field-effect transistor performance by incorporating functionalized double-walled carbon nanotubes

Excellent electrical properties and large-scale fabrication are essential for extending the application of flexible organic electronics in practice.

One-dimensional Growth of Zinc Crystals on a Liquid Surface

The catalyst-free growth of nanocrystals on various substrates at room temperature has been a long-standing goal in the development of material science. We report the growth of one-dimensional zinc nanocrystals on silicone oil surfaces by thermal evaporation method at room temperature (20 ± 2 °C). Uniform zinc nanorods with tunable size can be obtained. The typical length and width of the nanorods are 250-500 nm and 20-40 nm, respectively. The growth mechanism can be attributed to the effect of the liquid substrate and the preferential growth direction of the crystals. This result provides a novel and simple way to fabricate the precursors (zinc crystals) for preparation of Zn-based semiconductors and other metallic crystals on liquid substrates.

Supramolecular trap for a transient corannulene trianion

The first structural characterization of the transient triply-reduced state of corannulene (C₂₀H₁₀) is accomplished. The X-ray crystallographic study reveals that the C₂₀H₁₀˙^3- trianions, generated by corannulene reduction with metallic cesium, form a novel type of supramolecular sandwich-type assembly, [Cs⁺//(C₂₀H₁₀^3-)/4Cs⁺/(C₂₀H₁₀^3-)//Cs⁺]. In the product, two triply-charged corannulene decks encapsulate a rectangle of four cesium ions with the external concave bowl cavities being filled by one cesium ion each. The structural investigation is augmented by in-depth theoretical calculations to provide insights into the geometrical features and electronic structure of this unique organometallic self-assembly.