Evidence of Porphyrin-Like Structures in Natural Melanin Pigments Using Electrochemical Fingerprinting

Interactions of Melanin with Electromagnetic Radiation: From Fundamentals to Applications

Melanin, especially integumentary melanin, interacts in numerous ways with electromagnetic radiation, leading to a set of critical functions, including radiation protection, UV-protection, pigmentary and structural color productions, and thermoregulation. By harnessing these functions, melanin and melanin-like materials can be widely applied to diverse applications with extraordinary performance. Here we provide a unified overview of the melanin family (all melanin and melanin-like materials) and their interactions with the complete electromagnetic radiation spectrum (X-ray, Gamma-ray, UV, visible, near-infrared), which until now has been absent from the literature and is needed to establish a solid fundamental base to facilitate their future investigation and development. We begin by discussing the chemistries and morphologies of both natural and artificial melanin, then the fundamentals of melanin-radiation interactions, and finally the exciting new developments in high-performance melanin-based functional materials that exploit these interactions. This Review provides both a comprehensive overview and a discussion of future perspectives for each subfield of melanin that will help direct the future development of melanin from both fundamental and applied perspectives.

Biomimetic Exogenous "Tissue Batteries" as Artificial Power Sources for Implantable Bioelectronic Devices Manufacturing

Implantable bioelectronic devices (IBDs) have gained attention for their capacity to conformably detect physiological and pathological signals and further provide internal therapy. However, traditional power sources integrated into these IBDs possess intricate limitations such as bulkiness, rigidity, and biotoxicity. Recently, artificial "tissue batteries" (ATBs) have diffusely developed as artificial power sources for IBDs manufacturing, enabling comprehensive biological-activity monitoring, diagnosis, and therapy. ATBs are on-demand and designed to accommodate the soft and confining curved placement space of organisms, minimizing interface discrepancies, and providing ample power for clinical applications. This review presents the near-term advancements in ATBs, with a focus on their miniaturization, flexibility, biodegradability, and power density. Furthermore, it delves into material-screening, structural-design, and energy density across three distinct categories of TBs, distinguished by power supply strategies. These types encompass innovative energy storage devices (chemical batteries and supercapacitors), power conversion devices that harness power from human-body (biofuel cells, thermoelectric nanogenerators, bio-potential devices, piezoelectric harvesters, and triboelectric devices), and energy transfer devices that receive and utilize external energy (radiofrequency-ultrasound energy harvesters, ultrasound-induced energy harvesters, and photovoltaic devices). Ultimately, future challenges and prospects emphasize ATBs with the indispensability of bio-safety, flexibility, and high-volume energy density as crucial components in long-term implantable bioelectronic devices.

Constraint Coupling of Redox Cascade and Electron Transfer Synchronization on Electrode-Nanosensor Interface for Repeatable Detection of Tumor Biomarkers

Quantitative analysis of up-regulated biomarkers in pathological tissues is helpful to tumor surgery yet the loss of biomarker extraction and time-consuming operation limited the accurate and quick judgement in preoperative or intraoperative diagnosis. Herein, an immobilization-free electrochemical sensing platform is developed by constraint coupling of electron transfer cascade on electrode-nanosensor interface. Specifically, electrochemical indicator (Ri)-labeled single-stranded DNA on electroactive nanodonor (polydopamine, PDA) can be responsively detached by formation of DNA complex through the recognition and binding with targets. By applying the oxidation potential of Ri, nanosensor collisions on electrode surface trigger a cascade redox cycling of PDA and Ri through synchronous electron transfer, which boost the amplification of current signal output. The developed nanosensor exhibit excellent linear response toward up-regulated biomarkers (miRNA-21, ATP, and VEGF) with low detection limits (32 fM, 386 pM, and 2.8 pM). Moreover, background influence from physiological interferent is greatly reduced by restricted electron transfer coupling on electrode. The practical applicability is illustrated in sensitive and highly repeatable profiling of miRNA-21 in lysate of tumor cells and tumor tissue, beneficial for more reliable diagnosis. This electrochemical platform by employing electron transfer cascades at heterogeneous interfaces offers a route to anti-interference detection of biomarkers in tumor tissues.

Melanin and Polypyrrole-Coated Nanocellulose Hydrogel Networks for Environmental Sensing and Energy Storage

Melanins are black-brown pigments of a specific class of poly indolequinones found in nature and in the human body. They are responsible for photoprotection, radical scavenging, and metal ion chelation. Recently, there has been significant interest in eumelanin as a functional material due to its macromolecular structure and the exploitation of the quinone-hydroquinone redox equilibrium. While eumelanin can be used in many promising applications, it is insoluble in most solvents, limiting its processing into homogeneous materials and coatings. A promising approach is to use a carrier system to stabilize eumelanin by incorporating cellulose nanofibrils (CNFs), a nanoscopic material that originates from plant biomass. In this work, a flexible network consisting of CNFs coupled with vapor-phase polymerized conductive polypyrrole (PPy) is utilized to form a functional eumelanin hydrogel composite (MelaGel) for environmental sensing and battery applications. Flexible sensors for detecting pH or metal ions made from MelaGel can detect both pH values in a range from 4 to 10 and metal ions like zinc(II), copper(II), and iron(III), paving the way for environmental and biomedical sensor applications. The reduced internal resistance in the MelaGel leads to improved charge storage ability compared to synthetic eumelanin composite electrodes. Other noteworthy advantages of the MelaGel are the amphiphilic nature of PPy and the additionally offered redox centers. Lastly, this material was tested in aqueous electrolyte zinc coin cells, where it was shown to have charge/discharge stability for over 1200 cycles, showcasing this MelaGel composite as a promising eumelanin-based composite hybrid sensor/energy storage material.

Synthesis of biologically derived poly(pyrogallol) nanofibers for antibacterial applications

Herein, we present the facile synthesis of poly(pyrogallol) biopolymers and their application as antibacterial agents. Pyrogallol is a class of phenolic compounds that can be found in various plants. Polymerization was performed by the auto-oxidation of pyrogallol under a hydrated condition. The microscopic image of poly(pyrogallol) shows a highly homogenous nanofibrous structure with a diameter of 100.3 ± 16.3 nm. Spectroscopic analysis by FT-IR spectroscopy, Raman spectroscopy, and XPS corroborated the formation of ether (C-O-C) bonds between the hydroxyl group and adjacent carbons of pyrogallol during polymerization. The FT-IR and XPS spectra also revealed redox-active gallol functional groups on poly(pyrogallol) nanofibers, which can be used to release free electrons and protons during oxidation followed by the generation of reactive oxygen species (ROS). The generated ROS from poly(pyrogallol) was used to inhibit the growth of bacteria, Escherichia coli, at a inhibition rates of 56.3 ± 9.7% and 95.5 ± 2.0% within 0.5 and 2 h, respectively. This finding suggests that poly(pyrogallol) can be used as a naturally occurring antibacterial agent for various biomedical and environmental applications.

A biocompatible and fully erodible conducting polymer enables implanted rechargeable Zn batteries

Implanted rechargeable batteries that can provide energy over a sufficient lifetime and ultimately degrade into non-toxic byproducts are highly desirable. However, their advancement is significantly impeded by the limited toolbox of electrode materials with a known biodegradation profile and high cycling stability. Here we report biocompatible, erodible poly(3,4-ethylenedioxythiophene) (PEDOT) grafted with hydrolyzable carboxylic acid pendants. This molecular arrangement combines the pseudocapacitive charge storage from the conjugated backbones and dissolution via hydrolyzable side chains. It demonstrates complete erosion under aqueous conditions in a pH-dependent manner with a predetermined lifetime. The compact rechargeable Zn battery with a gel electrolyte offers a specific capacity of 31.8 mA h g^-1 (57% of theoretical capacity) and outstanding cycling stability (78% capacity retention over 4000 cycles at 0.5 A g^-1). Subcutaneous implantation of this Zn battery into Sprague-Dawley (SD) rats demonstrates complete biodegradation in vivo and biocompatibility. This molecular engineering strategy presents a viable avenue for developing implantable conducting polymers with a predetermined degradation profile and high energy storage capability.

Accumulation mechanisms of radiocaesium within lichen thallus tissues determined by means of in situ microscale localisation observation

Many lichens are well known to accumulate radiocaesium and, thus acting as biomonitors of contamination levels. However, the actual localisation and chemical forms of radiocaesium in contaminated lichens have not yet been elucidated because, despite their high radioactivity, these forms are present in trace amounts as chemical entities. Here, we use autoradiography and demonstrate for the first time in situ microscale localisation of radiocaesium within thallus tissues to investigate the radiocaesium forms and their accumulation mechanism. Radiocaesium distributions showed similar trends in lichen tissues collected two and six years after the Fukushima nuclear accident. The radiocaesium was localised in the brown pigmented parts i.e., melanin-like substances, in the lower cortex of lichen thallus. Quantum chemical calculations showed that functional group of melanin-like substances can chelate Cs⁺ ion, which indicates that the Cs⁺ ions form complexes with the substances. Based on these findings, we suggest that radiocaesium ions may be retained stably in melanin-like substances for long periods (two to six years) due to steric factors, such as those seen in porphyrin-like structures and via multimer formation in the lower cortex. In addition, electron microscopy and autoradiography were used to observe radiocaesium-bearing microparticles (CsMPs) on/in the upper cortex and around the medullary layer. Micron-sized particles appeared to adhere to the surface tissue of the thallus, as shown by electron microscopy, suggesting that the particles were trapped by development of an adhesive layer; that is, CsMPs were trapped both physically and physiologically. These findings provide information on in situ localisation of two chemical forms of radiocaesium, cations and particles, in lichen thallus tissues and their accumulation mechanisms.

Bacterial pigments: A colorful palette reservoir for biotechnological applications

Synthetic derivatives are currently used instead of pigments in many applicative fields, from food to feed, from pharmaceutical to diagnostic, from agronomy to industry. Progress in organic chemistry allowed to obtain rather cheap compounds covering the whole color spectrum. However, several concerns arise from this chemical approach, as it is mainly based on nonrenewable resources such as fossil oil, and the toxicity or carcinogenic properties of products and/or precursors may be harmful for personnel involved in the productive processes. In this scenario, microorganisms and their pigments represent a colorful world to discover and reconsider. Each living bacterial strain may be a source of secondary metabolites with peculiar functions. The aim of this review is to link the physiological role of bacterial pigments with their potential use in different biotechnological fields. This enormous potential supports the big challenge for the development of strategies useful to identify, produce, and purify the right pigment for the desired application. At the end of this ideal journey through the world of bacterial pigments, the attention will be focused on melanin compounds, whose production relies upon different techniques ranging from natural producers, heterologous hosts, or isolated enzymes. In a green workflow, the microorganisms represent the starting and final point of pigment production.

Free Energy and Stacking of Eumelanin Nanoaggregates

Eumelanin, a member of the melanin family, is a black-brown insoluble pigment. It possesses a broad range of properties such as antioxidation, free radical scavenging, photoprotection, and charge carrier transportation. Surprisingly, the exact molecular structure of eumelanin remains undefined. It is, however, generally considered to consist of two main building blocks, 5,6-dihydroxyindole (DHI) and 5,6- dihydroxyindole carboxylic acid (DHICA). We focus on DHI and report, for the first time, a computational investigation of the structural properties of DHI-eumelanin aggregates in aqueous solutions. First, multimicrosecond molecular dynamics (MD) simulations at different concentrations were performed to investigate the aggregation and ordering of tetrameric DHI-eumelanin protomolecules. This was followed by umbrella sampling (US) and density functional theory (DFT) calculations to study the physical mechanisms of stacking. Aggregation occurs through formation of nanoscale stacks and was observed in all systems. Further analyses showed that aggregation and coarsening of the domains is due to a decrease in hydrogen bonds between the eumelanins and water; while domains exist, there is no long-range order. The results show noncovalent stacks with the interlayer distance between eumelanin protomolecules being less than 3.5 Å. This is in good agreement with transmission electron microscopy data. Both free energy calculations and DFT revealed strong stacking interactions. The electrostatic potential map provides an explanation and a rationale for the slightly sheared relative orientations and, consequently, for the curved shapes of the nanoscale domains.

Water-Activated Semiquinone Formation and Carboxylic Acid Dissociation in Melanin Revealed by Infrared Spectroscopy

Eumelanin is a widespread biomacromolecule pigment in the biosphere and has been widely investigated for numerous bioelectronics and energetic applications. Many of these applications depend on eumelanin's ability to conduct proton current at various levels of hydration. The origin of this behavior is connected to a comproportionation reaction between oxidized and reduced monomer moieties and water. A hydration-dependent FTIR spectroscopic study on eumelanin is presented herein, which allows for the first time tracking the comproportionation reaction via the gradual increase of the overall aromaticity of melanin monomers in the course of hydration. We identified spectral features associated with the presence of specific "one and a half" C𝌁O bonds, typical for o-semiquinones. Signatures of semiquinone monomers with internal hydrogen bonds and that carboxylic groups, in contrast to semiquinones, begin to dissociate at the very beginning of melanin hydration were indicated. As such, we suggest a modification to the common hydration-dependent conductivity mechanism and propose that the conductivity at low hydration is dominated by carboxylic acid protons, whereas higher hydration levels manifest semiquinone protons.

Powering Implantable and Ingestible Electronics

Implantable and ingestible biomedical electronic devices can be useful tools for detecting physiological and pathophysiological signals, and providing treatments that cannot be done externally. However, one major challenge in the development of these devices is the limited lifetime of their power sources. The state-of-the-art of powering technologies for implantable and ingestible electronics is reviewed here. The structure and power requirements of implantable and ingestible biomedical electronics are described to guide the development of powering technologies. These powering technologies include novel batteries that can be used as both power sources and for energy storage, devices that can harvest energy from the human body, and devices that can receive and operate with energy transferred from exogenous sources. Furthermore, potential sources of mechanical, chemical, and electromagnetic energy present around common target locations of implantable and ingestible electronics are thoroughly analyzed; energy harvesting and transfer methods befitting each energy source are also discussed. Developing power sources that are safe, compact, and have high volumetric energy densities is essential for realizing long-term in-body biomedical electronics and for enabling a new era of personalized healthcare.

Melanin, the What, the Why and the How: An Introductory Review for Materials Scientists Interested in Flexible and Versatile Polymers

Today, western society is facing challenges to create new medical technologies to service an aging population as well as the ever-increasing e-waste of electronic devices and sensors. A key solution to these challenges will be the use of biomaterials and biomimetic systems. One material that has been receiving serious attention for its biomedical and device applications is eumelanin. Eumelanin, or commonly known as melanin, is nature's brown-black pigment and is a poly-indolequinone biopolymer, which possess unique physical and chemical properties for material applications. Presented here is a review, aimed at polymer and other materials scientists, to introduce eumelanin as a potential material for research. Covered here are the chemical and physical structures of melanin, an overview of its unique physical and chemical properties, as well as a wide array of applications, but with an emphasis on device and sensing applications. The review is then finished by introducing interested readers to novel synthetic protocols and post synthesis fabrication techniques to enable a starting point for polymer research in this intriguing and complex material.

Micropatterned Silk-Fibroin/Eumelanin Composite Films for Bioelectronic Applications

There has been growing interest in the use of natural bionanomaterials and nanostructured systems for diverse biomedical applications. Such materials can confer unique functional properties as well as address concerns pertaining to sustainability in production. In this work, we propose the biofabrication of micropatterned silk fibroin/eumelanin composite thin films to be used in electroactive and bioactive applications in bioelectronics and biomedical engineering. Eumelanin is the most common form of melanin, naturally derived from the ink of cuttlefish, having antioxidant and electroactive properties. Another natural biomaterial, the protein silk fibroin, is modified with photoreactive chemical groups, which allows the formation of electroactive eumelanin thin films with different microstructures. The silk fibroin/eumelanin composites are fabricated to obtain thin films as well as electroactive microstructures using UV curing. Here, we report for the first time the preparation, characterization, and physical, electrochemical, and biological properties of these natural silk fibroin/eumelanin composite films. Higher concentrations of eumelanin incorporated into the films exhibit a higher charge storage capacity and good electroactivity even after 100 redox cycles. In addition, the microscale structure and the cellular activity of the fibroin/eumelanin films are assessed for understanding of the biological properties of the composite. The developed micropatterned fibroin/eumelanin films can be applied as natural electroactive substrates for bioapplications (e.g., bioelectronics, sensing, and theranostics) because of their biocompatible properties.

Melanin-Inspired Chromophoric Microparticles Composed of Polymeric Peptide Pigments

Melanin and related polyphenolic pigments are versatile functional polymers that serve diverse aesthetic and protective roles across the living world. These polymeric pigments continue to inspire the development of adhesive, photonic, electronic and radiation-protective materials and coatings. The properties of these structures are dictated by covalent and non-covalent interactions in ways that, despite progress, are not fully understood. It remains a major challenge to direct oxidative polymerization of their precursors (amino acids, (poly-)phenols, thiols) toward specific structures. By taking advantage of supramolecular pre-organization of tyrosine-tripeptides and reactive sequestering of selected amino acids during enzymatic oxidation, we demonstrate the spontaneous formation of distinct new chromophores with optical properties that are far beyond the range of those found in biological melanins, in terms of color, UV absorbance and fluorescent emission.

A novel melanin complex displayed the affinity to HepG2 cell membrane and nucleus

Chitosan-melanin complex from Catharsius molossus L. has proven to possess superior pharmaceutical excipient performance and may be the new source of water-soluble protein-free natural melanin. Herein, it was enzymatically hydrolyzed into the chitooligosaccharide-melanin complex (CMC) whose main chemical units were composed of eumelanin and chitooligosaccharides and showed three-layer structures. Additionally, this biomacromolecule could self-assemble into 40 nm nanoparticles (CMC Nps) in a weakly acidic aqueous solution. Interestingly, CMC displayed strong affinity for cell membrane by binding the phosphatidylserine, glycoprotein, glycolipids and glycosaminoglycans accumulated on the surface of tumor cells, notably, CMC Nps could enter cells and mainly target the nucleus by interacting with DNA and/or RNA substrates located around the nucleus to disrupt the proliferation and apoptosis processes. The findings suggest CMC may be the novel material for subcellular organelle targeting of cancer cells.

Melanin pigments extracted from horsehair as antibacterial agents

Here we present the important findings related to biologically derived pigments for potential use as antibacterial agents. Melanin biopigments extracted from Equus ferus hair exhibit a homogeneous elliptical microstructure with highly ordered semicrystalline features. Spectroscopic analysis indicates that melanin contains a high degree of redox active catechol groups, which can produce reactive oxygen species. The antibacterial activity of melanins was tested by incubating Escherichia coli and Staphylococcus aureus with melanins. The results showed 100% bacterial growth inhibition within 4 h. This finding suggests that melanin pigments may serve as naturally occurring antibacterial agents with unique redox chemistry and reactive oxygen species generation capability.

Influence of Ions and pH on the Formation of Solid- and Liquid-like Melanin

Melanin is a natural pigment with broadband absorption and effective ability to dissipate the energy absorbed. The macromolecular structure of melanin shows a delicate balance between short-range ordered and disordered structures without being a random aggregate. The presence of ions or the variation in pH or ionic strength can alter the self-assembly process which subsequently changes the structure of melanin. To understand these relationships, this study investigates the influence of ions and pH in melanin formation. The types of ions present and pH have a profound influence on the formation and structure of melanin particles, while only minor changes are observed in the absorption and excitation-emission analysis. In some conditions, the formation of discernible particles with significant refractive index contrast is avoided while retaining the spectroscopic characteristics of melanin, leading to liquid-like melanin. These findings identify potential pathways which can be used to manipulate the melanin macromolecular structure while providing the desired spectral properties to enable novel bio-engineering applications.

Materials Strategies and Device Architectures of Emerging Power Supply Devices for Implantable Bioelectronics

Implantable bioelectronics represent an emerging technology that can be integrated into the human body for diagnostic and therapeutic functions. Power supply devices are an essential component of bioelectronics to ensure their robust performance. However, conventional power sources are usually bulky, rigid, and potentially contain hazardous constituent materials. The fact that biological organisms are soft, curvilinear, and have limited accommodation space poses new challenges for power supply systems to minimize the interface mismatch and still offer sufficient power to meet clinical-grade applications. Here, recent advances in state-of-the-art nonconventional power options for implantable electronics, specifically, miniaturized, flexible, or biodegradable power systems are reviewed. Material strategies and architectural design of a broad array of power devices are discussed, including energy storage systems (batteries and supercapacitors), power devices which harvest sources from the human body (biofuel cells, devices utilizing biopotentials, piezoelectric harvesters, triboelectric devices, and thermoelectric devices), and energy transfer devices which utilize sources in the surrounding environment (ultrasonic energy harvesters, inductive coupling/radiofrequency energy harvesters, and photovoltaic devices). Finally, future challenges and perspectives are given.

Paramagnetism and Relaxation Dynamics in Melanin Biomaterials

Spectroscopical characterization of melanins is a prior requirement for the efficient tailoring of their radical scavenging, ultraviolet-visible radiation absorption, metal chelation, and natural pigment properties. Electron paramagnetic resonance (EPR), exploiting the common persistent paramagnetism of melanins, represents the elective standard for the structural and dynamical characterization of their constituting radical species. Although melanins are mainly investigated using X-band (9.5 GHz) continuous wave (CW)-EPR, an integration with the application of Q-band (34 GHz) in CW and pulse EPR for the discrimination of melanin pigments of different compositions is presented here. The longitudinal relaxation times measured highlight faster relaxation rates for cysteinyldopa melanin, compared to those of the most common dopa melanin pigment, suggesting pulse EPR spin-lattice relaxation time measurements as a complementary tool for characterization of pigments of interest for biomimetic materials engineering.

Melanin Produced by the Fast-Growing Marine Bacterium Vibrio natriegens through Heterologous Biosynthesis: Characterization and Application

Melanin is a pigment produced by organisms throughout all domains of life. Due to its unique physicochemical properties, biocompatibility, and biostability, there has been an increasing interest in the use of melanin for broad applications. In the vast majority of studies, melanin has been either chemically synthesized or isolated from animals, which has restricted its use to small-scale applications. Using bacteria as biocatalysts is a promising and economical alternative for the large-scale production of biomaterials. In this study, we engineered the marine bacterium Vibrio natriegens, one of the fastest-growing organisms, to synthesize melanin by expressing a heterologous tyrosinase gene and demonstrated that melanin production was much faster than in previously reported heterologous systems. The melanin of V. natriegens was characterized as a polymer derived from dihydroxyindole-2-carboxylic acid (DHICA) and, similarly to synthetic melanin, exhibited several characteristic and useful features. Electron microscopy analysis demonstrated that melanin produced from V. natriegens formed nanoparticles that were assembled as "melanin ghost" structures, and the photoprotective properties of these particles were validated by their protection of cells from UV irradiation. Using a novel electrochemical reverse engineering method, we observed that melanization conferred redox activity to V. natriegens Moreover, melanized bacteria were able to quickly adsorb the organic compound trinitrotoluene (TNT). Overall, the genetic tractability, rapid division time, and ease of culture provide a set of attractive properties that compare favorably to current E. coli production strains and warrant the further development of this chassis as a microbial factory for natural product biosynthesis.IMPORTANCE Melanins are macromolecules that are ubiquitous in nature and impart a large variety of biological functions, including structure, coloration, radiation resistance, free radical scavenging, and thermoregulation. Currently, in the majority of investigations, melanins are either chemically synthesized or extracted from animals, which presents significant challenges for large-scale production. Bacteria have been used as biocatalysts to synthesize a variety of biomaterials due to their fast growth and amenability to genetic engineering using synthetic biology tools. In this study, we engineered the extremely fast-growing bacterium V. natriegens to synthesize melanin nanoparticles by expressing a heterologous tyrosinase gene with inducible promoters. Characterization of the melanin produced from V. natriegens-produced tyrosinase revealed that it exhibited physical and chemical properties similar to those of natural and chemically synthesized melanins, including nanoparticle structure, protection against UV damage, and adsorption of toxic compounds. We anticipate that producing and controlling melanin structures at the nanoscale in this bacterial system with synthetic biology tools will enable the design and rapid production of novel biomaterials for multiple applications.

Mechanistic understanding of monovalent cation transport in eumelanin pigments

Recent research advances in charge-conducting materials have enabled the transformation of the naturally-occurring materials into crucial components in many technologies, including renewable energy storage devices or bioelectronics. Among various candidates, eumelanins are promising charge storage materials, exhibiting hybrid electronic ionic conductivity in a hydrated environment. The chemical and electrochemical properties of eumelanins are relatively well studied; however, the structure-property relationship is still elusive up to date. Herein, we reported the mesoscale structure of eumelanins and its impact on the charge transport. X-ray scattering suggests that eumelanin pigments exhibit the semi-crystalline structure with ordered d-spacings. These unique mesoscale structures further influence the charge transport mechanism with the cations of various sizes. Understanding the structures with consequent electrochemical properties suggest that eumelanins can further be tuned to serve as high-performance naturally-occurring charge storage materials.

Development of a Competition-Binding Assay to Determine Binding Affinity of Molecules to Neuromelanin via Fluorescence Spectroscopy

Neuromelanin, the polymeric form of dopamine which accumulates in aging neuronal tissue, is increasingly recognized as a functional and critical component of a healthy and active adult human brain. Notorious in plant and insect literature for their ability to bind and retain amines for long periods of time, catecholamine polymers known colloquially as 'melanins' are nevertheless curiously absent from most textbooks regarding biochemistry, neuroscience, and evolution. Recent research has brought attention to the brain pigment due to its possible role in neurodegeneration. This linkage is best illustrated by Parkinson's disease, which is characterized by the loss of pigmented dopaminergic neurons and the 'white brain' pathological state. As such, the ability to determine the binding affinity of neurotoxic agents, as well as any potential specific endogenous ligands to neuromelanin are of interest and potential value. Neuromelanin has been shown to have saturable binding interactions with nicotine as monitored by a fluorimeter. This interaction provides a signal to allow for a competition-binding assay with target molecules which do not themselves produce signal. The current report establishes the viability of this competition assay toward three compounds with central relevance to Parkinson's disease. The K_d of binding toward neuromelanin by methyl-phenyl-pyridinium ion (MPP+), dopamine, and 6-hydroxydopamine were found to be 1 mM, 0.05 mM, and 0.1 mM, respectively in the current study. In addition, we demonstrate that 6-hydroxydopamine polymerizes to form neuromelanin granules in cultured dopaminergic neurons that treated with 2,4,5-trihydroxy-l-phenylalanine. Immunohistochemical analysis using fluor-tagged anti-dopamine antibodies suggests that the incorporation of 6-hydroxydopamine (following internalization and decarboxylation analogous to levodopa and dopamine) alters the localized distribution of bound dopamine in these cells.

Influence of Melanin Characteristics on Drug Binding Properties

Melanins are biopolymers encompassing a high degree of chemical heterogeneity. Binding of small-molecule drugs to ocular melanin significantly affects the ocular pharmacokinetics, and could serve as a strategy for prolonged drug retention in the eye. The influence of the structural and physical characteristics of melanins originating from different sources on their drug binding properties has not yet been methodically investigated. We performed physical characterization of Sepia officinalis, synthetic and porcine melanin. The particle size distribution was analyzed by laser diffractometry. A dynamic vapor sorption method, requiring small amounts of the material, was developed to analyze the differences in the specific surface area of the melanins. The extent of melanin binding at equilibrium was determined for a set of 34 small-molecule drugs and compared across different melanin types. Despite systematic shifts in the extent of binding within a twofold range, binding data were highly correlated across the melanins. These moderate differences in binding could not be directly explained by the substantial differences in particle size and were more in line with the relatively similar specific surface area of these different melanin materials. Overall, these results suggest that the specific surface area reflects the actual accessibility of a small molecule in the melanin structure and could serve as a surrogate to explain the binding differences observed for the respective melanin materials.

Role of polydopamine's redox-activity on its pro-oxidant, radical-scavenging, and antimicrobial activities

Polydopamine (PDA) is a bioinspired material and coating that offers diverse functional activities (e.g., photothermal, antioxidant, and antimicrobial) for a broad range of applications. Although PDA is reported to be redox active, the association between PDA's redox state and its functional performance has been difficult to discern because of PDA's complex structure and limitations in methods to characterize redox-based functions. Here, we use an electrochemical reverse engineering approach to confirm that PDA is redox-active and can repeatedly accept and donate electrons. We observed that the electron-donating ability of PDA offers the detrimental pro-oxidant effect of donating electrons to O₂ to generate reactive oxygen species (ROS) or, alternatively, the beneficial antioxidant effect of quenching oxidative free radicals. Importantly, PDA's electron-donating ability depends on its redox state and is strongly influenced by external factors including metal ion binding as well as near-infrared (NIR) irradiation. Furthermore, we demonstrated that PDA possesses redox state-dependent antimicrobial properties in vitro and in vivo. We envision that clarification of PDA's redox activity will enable better understanding of PDA's context-dependent properties (e.g., antioxidant and pro-oxidant) and provide new insights for further applications of PDA. STATEMENT OF SIGNIFICANCE: We believe this is the first report to characterize the redox activities of polydopamine (PDA) and to relate these redox activities to functional properties important for various proposed applications of PDA. We observed that polydopamine nanoparticles 1) are redox-active; 2) can repeatedly donate and accept electrons; 3) can accept electrons from reducing agents (e.g., ascorbate), donate electrons to O₂ to generate ROS, and donate electrons to free radicals to quench them; 4) have redox state-dependent electron-donating abilities that are strongly influenced by metal ion binding as well as NIR irradiation; and 5) have redox state-dependent antimicrobial activities.

Polydopamine Nanoparticles Prepared Using Redox-Active Transition Metals

Autoxidation of dopamine to polydopamine by dissolved oxygen is a slow process that requires highly alkaline conditions. Polydopamine can be formed rapidly also in mildly acidic and neutral solutions by using redox-active transition-metal ions. We present a comparative study of polydopamine nanoparticles formed by autoxidation and aerobic or anaerobic oxidation in the presence of Ce(IV), Fe(III), Cu(II), and Mn(VII). The UV-vis spectra of the purified nanoparticles are similar, and dopaminechrome is an early intermediate species. At low pH, Cu(II) requires the presence of oxygen and chloride ions to produce polydopamine at a reasonable rate. The changes in dispersibility and surface charge take place at around pH 4, which indicates the presence of ionizable groups, especially carboxylic acids, on their surface. X-ray photoelectron spectroscopy shows the presence of three different classes of carbons, and the carbonyl/carboxylate carbons amount to 5-15 atom %. The N 1s spectra show the presence of protonated free amino groups, suggesting that these groups may interact with the π-electrons of the intact aromatic dihydroxyindole moieties, especially in the metal-induced samples. The autoxidized and Mn(VII)-induced samples do not contain metals, but the metal content is 1-2 atom % in samples prepared with Ce(IV) or Cu(II), and ca. 20 atom % in polydopamine prepared in the presence of Fe(III). These differences in the metal content can be explained by the oxidation and complexation properties of the metals using the general model developed. In addition, the nitrogen content is lower in the metal-induced samples. All of the metal oxidants studied can be used to rapidly prepare polydopamine at room temperature, but the possible influence of the metal content and nitrogen loss should be taken into account.

Understanding Molecular Drivers of Melanin Binding To Support Rational Design of Small Molecule Ophthalmic Drugs

Binding of drugs to ocular melanin is a prominent biological phenomenon that affects the local pharmacokinetics and pharmacodynamics in the eye. In this work, we report on the development of in vitro and in silico tools for an early assessment and prediction of melanin binding properties of small molecules. A robust high-throughput assay has been established to study the binding of large sets of compounds to melanin. The extremely randomized trees approach was used to develop an in silico model able to predict the extent of melanin binding from the molecular properties of the compounds. After the last iteration of the model, strong melanin binders could prospectively be identified with 91% accuracy. On the basis of in vitro data generated for approximately 3400 chemically diverse drug-like small molecules, pronounced correlations were observed between the extent of melanin binding and the basicity, lipophilicity, and aromaticity of the compounds.

Advances in Materials and Structures for Ingestible Electromechanical Medical Devices

Ingestible biomedical devices that diagnose, prevent, or treat diseases has been a dream of engineers and clinicians for decades. The increasing apparent importance of gut health on overall well-being and the prevalence of many gastrointestinal diseases have renewed focus on this emerging class of medical devices. Several prominent examples of commercially successful ingestible medical devices exist. However, many technical challenges remain before ingestible medical devices can achieve their full clinical potential. This Minireview summarizes recent discoveries in this interdisciplinary topic including novel materials, advanced materials processing techniques, and select examples of integrated ingestible electromechanical systems. After a brief historical perspective, these topics will be reviewed with a dedicated focus on advanced functional materials and fabrication strategies in the context of clinical translation and potential regulatory considerations. Future perspectives, challenges, and opportunities related to ingestible medical devices will also be summarized.

Semiconducting Synthetic Melanin-Based Organic/Inorganic Hybrid Photoanodes for Solar Water Oxidation

We report the development of semiconducting melanin-based organic/inorganic hybrid photoanodes for solar water oxidation. Synthetic melanin thin-film incorporating polyoxometalate (POM) water oxidation catalysts (WOCs) are readily deposited on the surface of various n-type inorganic semiconductors (e.g., Fe₂ O₃ , BiVO₄ , and TiO₂ ) by electropolymerization. The deposition of melanin and POM hybrid (MP) thin-film results in the remarkably improved performance of an underlying semiconductor photoanode for solar water oxidation with a significantly increased photocurrent density and decreased onset potential for water oxidation through the formation of a melanin-based p-n heterojunction structure. We believe that this study can provide insights into the design and fabrication of various melanin-based optoelectronic devices by utilizing its unique physicochemical properties.

The Late Stages of Melanogenesis: Exploring the Chemical Facets and the Application Opportunities

In the last decade, the late stages of melanin biosynthesis involving the oxidative polymerization of 5,6-dihydroxyindole (DHI) and 5,6-dihydroxyindole-2-carboxylic acid (DHICA) have been extensively investigated. Most of the information derived from a biomimetic approach in which the oxidation of melanogenic indoles was carried out under conditions mimicking those occurring in the biological environment. Characterization of the early oligomers allowed for drawing a structural picture of DHI and DHICA melanins, providing also an interpretative basis for the different properties exhibited by these pigments, e.g., the chromophore and the antioxidant ability. The improved knowledge has opened new perspectives toward the exploitation of the unique chemistry of melanins and its precursors in cosmetic and health care applications. A noticeable example is the development of an innovative hair dyeing system that is based on the marked ease of DHI to give rise to black melanin on air oxidation under slightly alkaline conditions. The advantage of this method for a step-wise coverage of gray hair with a natural shade pigmentation on repeated treatment with a DHI-based formulation with respect to traditional dyes is presented. A variant of DHICA melanin combining solubility in water-miscible organic solvents, an intense chromophore in the UltraViolet-A UV-A region, and a marked antioxidant potency was evaluated as an ingredient for cosmetic formulations.

Effects of pH and Oxidants on the First Steps of Polydopamine Formation: A Thermodynamic Approach

We present a general thermodynamic top-down analysis of the effects of oxidants and pH on dopamine oxidation and cyclization, supplemented with UV-vis and electrochemical studies. The model is applicable to other catecholamines and various experimental conditions. The results show that the decisive physicochemical parameters in autoxidation are the p K values of the semiquinone and the amino group in the oxidized quinone. Addition of Ce(IV) or Fe(III) enhances dopamine oxidation in acidic media in aerobic and anaerobic conditions by the direct oxidation of dopamine and, in the presence of oxygen, also by the autoxidation of the formed semiquinone. At pH 4.5, the enhancement of the one-electron oxidation of dopamine explains the overall reaction enhancement, but at a lower pH, cyclization becomes rate-determining. Oxidation by Cu(II) at reasonable rates requires the presence of oxygen or chloride ions.

Structural Basis of Polydopamine Film Formation: Probing 5,6-Dihydroxyindole-Based Eumelanin Type Units and the Porphyrin Issue

The role of 5,6-dihydroxyindole (DHI)-based oligomers, including porphyrin-like tetramers, in polydopamine (PDA) film formation was addressed by a comparative structural investigation against model polymers from DHI and its 2,7'-dimer. MALDI-MS data showed that (a) PDA is structurally different from DHI melanin and does not contain species compatible with DHI-based oligomers as primary building blocks; (b) PDA films and precipitate display a single main peak at m/ z 402 in common; (c) no species matching the range of m/ z values expected for cyclic porphyrin-type tetramers was detected in DHI melanin produced in the presence or in the absence of folic acid (FA) as templating agent, nor by oxidation of the 2,7'-dimer of DHI as putative precursor. ¹⁵N NMR resonances and Raman spectra predicted by extensive DFT calculations on porphyrin-type structures at various oxidation levels did not match spectral data for PDA or DHI melanin. Notably, unlike PDA, which gave structurally homogeneous films on quartz on atomic force microscopy (AFM) and micro-Raman spectroscopy, DHI melanin did not form any adhesive deposit after as long as 24 h. It is concluded that PDA film deposition involves structural components unrelated to DHI-based oligomers or porphyrin-type tetramers, which, on mechanism-based analysis, may arise by quinone-amine conjugation leading to polycyclic systems with extensive chain breakdown.

Polymeric peptide pigments with sequence-encoded properties

Melanins are a family of heterogeneous polymeric pigments that provide ultraviolet (UV) light protection, structural support, coloration, and free radical scavenging. Formed by oxidative oligomerization of catecholic small molecules, the physical properties of melanins are influenced by covalent and noncovalent disorder. We report the use of tyrosine-containing tripeptides as tunable precursors for polymeric pigments. In these structures, phenols are presented in a (supra-)molecular context dictated by the positions of the amino acids in the peptide sequence. Oxidative polymerization can be tuned in a sequence-dependent manner, resulting in peptide sequence-encoded properties such as UV absorbance, morphology, coloration, and electrochemical properties over a considerable range. Short peptides have low barriers to application and can be easily scaled, suggesting near-term applications in cosmetics and biomedicine.

Kaxiras's Porphyrin: DFT Modeling of Redox-Tuned Optical and Electronic Properties in a Theoretically Designed Catechol-Based Bioinspired Platform

A detailed computational investigation of the 5,6-dihydroxyindole (DHI)-based porphyrin-type tetramer first described by Kaxiras as a theoretical structural model for eumelanin biopolymers is reported herein, with a view to predicting the technological potential of this unique bioinspired tetracatechol system. All possible tautomers/conformers, as well as alternative protonation states, were explored for the species at various degrees of oxidation and all structures were geometry optimized at the density functional theory (DFT) level. Comparison of energy levels for each oxidized species indicated a marked instability of most oxidation states except the six-electron level, and an unexpected resilience to disproportionation of the one-electron oxidation free radical species. Changes in the highest energy occupied molecular orbital (HOMO)–lowest energy unoccupied molecular orbital (LUMO) gaps with oxidation state and tautomerism were determined along with the main electronic transitions: more or less intense absorption in the visible region is predicted for most oxidized species. Data indicated that the peculiar symmetry of the oxygenation pattern pertaining to the four catechol/quinone/quinone methide moieties, in concert with the NH centers, fine-tunes the optical and electronic properties of the porphyrin system. For several oxidation levels, conjugated systems extending over two or more indole units play a major role in determining the preferred tautomeric state: thus, the highest stability of the six-electron oxidation state reflects porphyrin-type aromaticity. These results provide new clues for the design of innovative bioinspired optoelectronic materials.

Melanin and Melanin-Related Polymers as Materials with Biomedical and Biotechnological Applications-Cuttlefish Ink and Mussel Foot Proteins as Inspired Biomolecules

The huge development of bioengineering during the last years has boosted the search for new bioinspired materials, with tunable chemical, mechanical, and optoelectronic properties for the design of semiconductors, batteries, biosensors, imaging and therapy probes, adhesive hydrogels, tissue restoration, photoprotectors, etc. These new materials should complement or replace metallic or organic polymers that cause cytotoxicity and some adverse health effects. One of the most interesting biomaterials is melanin and synthetic melanin-related molecules. Melanin has a controversial molecular structure, dependent on the conditions of polymerization, and therefore tunable. It is found in animal hair and skin, although one of the common sources is cuttlefish (Sepia officinalis) ink. On the other hand, mussels synthesize adhesive proteins to anchor these marine animals to wet surfaces. Both melanin and mussel foot proteins contain a high number of catecholic residues, and their properties are related to these groups. Dopamine (DA) can easily polymerize to get polydopamine melanin (PDAM), that somehow shares properties with melanin and mussel proteins. Furthermore, PDAM can easily be conjugated with other components. This review accounts for the main aspects of melanin, as well as DA-based melanin-like materials, related to their biomedical and biotechnological applications.

Functions of fungal melanin beyond virulence

Melanins are ancient biological pigments found in all kingdoms of life. In fungi, their role in microbial pathogenesis is well established; however, these complex biomolecules also confer upon fungal microorganisms the faculty to tolerate extreme environments such as the Earth's poles, the International Space Station and places contaminated by toxic metals and ionizing radiation. A remarkable property of melanin is its capacity to interact with a wide range of electromagnetic radiation frequencies, functioning as a protecting and energy harvesting pigment. Other roles of fungal melanin include scavenging of free radical, thermo-tolerance, metal ion sequestration, cell development, and mechanical-chemical cellular strength. In this review, we explore the various functions ascribed to this biological pigment in fungi and its remarkable physicochemical properties.

Polydopamine and eumelanin molecular structures investigated with ab initio calculations

A set of computational methods that contains a brute-force algorithmic generation of chemical isomers, molecular dynamics (MD) simulations, and density functional theory (DFT) calculations is reported and applied to investigate nearly 3000 probable molecular structures of polydopamine (PDA) and eumelanin. All probable early-polymerized 5,6-dihydroxyindole (DHI) oligomers, ranging from dimers to tetramers, have been systematically analyzed to find the most stable geometry connections as well as to propose a set of molecular models that represents the chemically diverse nature of PDA and eumelanin. Our results indicate that more planar oligomers have a tendency to be more stable. This finding is in good agreement with recent experimental observations, which suggested that PDA and eumelanin are composed of nearly planar oligomers that appear to be stacked together via π-π interactions to form graphite-like layered aggregates. We also show that there is a group of tetramers notably more stable than the others, implying that even though there is an inherent chemical diversity in PDA and eumelanin, the molecular structures of the majority of the species are quite repetitive. Our results also suggest that larger oligomers are less likely to form. This observation is also consistent with experimental measurements, supporting the existence of small oligomers instead of large polymers as main components of PDA and eumelanin. In summary, this work brings an insight into the controversial structure of PDA and eumelanin, explaining some of the most important structural features, and providing a set of molecular models for more accurate modeling of eumelanin-like materials.