Combined Inter- and Intramolecular Charge-Transfer Processes for Highly Efficient Fluorescent Organic Light-Emitting Diodes with Reduced Triplet Exciton Quenching

Intramolecular-locking modification enables efficient asymmetric donor-acceptor-donor' type ultraviolet emitters for high-performance OLEDs with reduced efficiency roll-off and high color purity

Developing high-performance ultraviolet organic light-emitting diodes with low efficiency roll-off and high color purity remains challenging due to their inherent wide-bandgap characteristics. In this work, we present an intramolecular noncovalent bond locking strategy to modulate donor-acceptor-donor' (D-A-D') type ultraviolet fluorophores (mPImCZ2F, mPIoCZ2F and mPImCP2F) with a hot-exciton mechanism. Notably, these asymmetric emitters exhibit significantly enhanced bipolar transport capacity and fluorescence efficiency compared to their counterparts. Among them, mPIoCZ2F exhibits a more remarkable intramolecular locking effect due to multiple C-H⋯F interactions and ortho-substitution-induced steric hindrance, which endows it with a higher radiation rate, narrower emission spectrum, and more balanced charge transport. Consequently, the mPIoCZ2F-based non-doped device achieves an electroluminescence (EL) peak at 393 nm with a maximum external quantum efficiency (EQE) of 6.62%. Moreover, in the doped device, mPIoCZ2F emits stable ultraviolet light with an EL peak at 391 nm and a full width at half maximum (FWHM) of 40 nm, corresponding to color coordinates of (0.167, 0.025). It also exhibits an exceptionally high EQE of 8.71% and minimal efficiency roll-off (7.95% at 1000 cd m-2), ranking among the best EL efficiencies reported for UV-OLEDs at high brightness levels.

The Golden Age of Thermally Activated Delayed Fluorescence Materials: Design and Exploitation

Since the seminal report by Adachi and co-workers in 2012, there has been a veritable explosion of interest in the design of thermally activated delayed fluorescence (TADF) compounds, particularly as emitters for organic light-emitting diodes (OLEDs). With rapid advancements and innovation in materials design, the efficiencies of TADF OLEDs for each of the primary color points as well as for white devices now rival those of state-of-the-art phosphorescent emitters. Beyond electroluminescent devices, TADF compounds have also found increasing utility and applications in numerous related fields, from photocatalysis, to sensing, to imaging and beyond. Following from our previous review in 2017 ( Adv. Mater. 2017, 1605444), we here comprehensively document subsequent advances made in TADF materials design and their uses from 2017-2022. Correlations highlighted between structure and properties as well as detailed comparisons and analyses should assist future TADF materials development. The necessarily broadened breadth and scope of this review attests to the bustling activity in this field. We note that the rapidly expanding and accelerating research activity in TADF material development is indicative of a field that has reached adolescence, with an exciting maturity still yet to come.

Ab initio electronic absorption spectra of para-nitroaniline in different solvents: Intramolecular charge transfer effects

Intramolecular charge transfer (ICT) effects of para-nitroaniline (pNA) in eight solvents (cyclohexane, toluene, acetic acid, dichloroethane, acetone, acetonitrile, dimethylsulfoxide, and water) are investigated extensively. The second-order algebraic diagrammatic construction, ADC(2), ab initio wave function is employed with the COSMO implicit and discrete multiscale solvation methods. We found a decreasing amine group torsion angle with increased solvent polarity and a linear correlation between the polarity and ADC(2) transition energies. The first absorption band involves π → π* transitions with ICT from the amine and the benzene ring to the nitro group, increased by 4%-11% for different solvation models of water compared to the vacuum. A second band of pNA is characterized for the first time. This band is primarily a local excitation on the nitro group, including some ICT from the amine group to the benzene ring that decreases with the solvent polarity. For cyclohexane, the COSMO implicit solvent model shows the best agreement with the experiment, while the explicit model has the best agreement for water.

Interacting Emission Species among Donor and Acceptor Moieties in a Donor-Grafted Polymer Host/TADF-Guest System and Their Effects on Photoluminescence and Electroluminescence

Thermally activated delayed fluorescence (TADF)-based electroluminescence (EL) devices adopting a host/guest strategy in their emitting layer (EML) are capable of realizing high efficiency. However, TADF emitters composed of donor and acceptor moieties as guests dispersed in organic host materials containing a donor and/or an acceptor are subject to donor-acceptor (D-A) interactions. In addition, electron delocalization between neighboring emitter molecules could form different species of aggregates. Here, we investigate the effects of intermolecular interacting emission species on the optoelectronic properties of sky-blue/green/red (sB/G/R) TADF emitters as guests using poly(biphenyl-Si/Ge) grafted with various donor moieties as hosts. We found the presence of guest/guest exciplex (Dg/Ag)*, host/guest exciplexes (Dh/Ag)*, and aggregates through the exploration of interactions between neighboring TADF guest molecules and between host and TADF-guest molecules. The nonradiative 3(Dh/Ag)* (ΔEST ≈ 0.5 eV) could increase the internal conversion rate (kIC) and reduce delayed luminescence, and both of them could cause a decrease in PLQY. The luminescence of 3(Dh/Ag)* may have a positive or negative effect on PLQY depending on its triplet energy. As the singlet and triplet energies of (aggregate)* are lower than those of (ICT)*, energy transfer from (ICT)* to (aggregate)* could occur. The low PLQY nature of (aggregate)* means that it is more likely to cause quenching in device emission. The emissions from (Dh/Ag)* and (aggregate)* are found to have increased full width at half-maximum and lead to lower emission color purity. Such intermolecular interactions should also occur in host/guest (TADF) systems and nondoped TADF emitter systems and thus are important factors for the molecular design of the TADF emitter and/or its accompanying host for high device efficiency and emission color purity.

Stable pure-green organic light-emitting diodes toward Rec.2020 standard

Manipulating dynamic behaviours of charge carriers and excitons in organic light-emitting diodes (OLEDs) is essential to simultaneously achieve high colour purity and superior operational lifetime. In this work, a comprehensive transient electroluminescence investigation reveals that incorporating a thermally activated delayed fluorescence assistant molecule with a deep lowest unoccupied molecular orbital into a bipolar host matrix effectively traps the injected electrons. Meanwhile, the behaviours of hole injection and transport are still dominantly governed by host molecules. Thus, the recombination zone notably shifts toward the interface between the emissive layer (EML) and the electron-transporting layer (ETL). To mitigate the interfacial carrier accumulation and exciton quenching, this bipolar host matrix could serve as a non-barrier functional spacer between EML/ETL, enabling the distribution of recombination zone away from this interface. Consequently, the optimized OLED exhibits a low driving voltage, promising device stability (95% of the initial luminance of 1000 cd m-2, LT95 > 430 h), and a high Commission Internationale de L'Éclairage y coordinate of 0.69. This indicates that managing the excitons through rational energy level alignment holds the potential for simultaneously satisfying Rec.2020 standard and achieving commercial-level stability.

HLCT-Type Acceptor Molecule-Based Exciplex System for Highly Efficient Solution-Processable OLEDs with Suppressed Efficiency Roll-Offs

Exciplex systems are promising candidates for thermally activated delayed fluorescence (TADF) molecules because of the small energy difference between the lowest singlet and triplet excited states (ΔEST). However, realizing high-efficiency and low-external-quantum-efficiency (EQE) roll-off in solution-processed organic light-emitting diodes (OLEDs) using an exciplex system remains a formidable challenge. In this study, two (HLCT)-type isomers with a spiro skeleton, 2-tBuspoCz-TRZ and 10-tBuspoCz-TRZ, are designed and synthesized as acceptors of exciplexes, where tert-butylspirofluorene indole is regarded as a donor and the triazine unit as an acceptor. Green exciplex emissions are observed for the 2-tBuspoCz-TRZ:TAPC and 10-tBuspoCz-TRZ:TAPC exciplexes, indicating distinct TADF characteristics with a very small ΔEST of 35 ± 5 meV. By using the TADF exciplex system based on the HLCT acceptor as an emitter, solution-processable OLEDs achieve a maximum external quantum efficiency (EQEmax) of 20.8%. Furthermore, a high EQEmax > 25% with a very low-efficiency roll-off (≈3.5% at 1000 cd m-2) is obtained for solution-processable phosphorescent devices using HLCT-based exciplexes as the host matrix of phosphors. This study paves the way for a novel strategy for designing acceptor exciplex molecules for effective TADF molecules and host matrices in solution-processable OLEDs.

Solvatochromic and Proton-Responsive characteristics of Bi-1,3,4-Oxadiazole derivatives with symmetric dimethylamino substitution

D-A molecules find extensive use in intelligent stimulus-response systems due to their exceptional attributes, including high sensitivity, rapid response, wide compatibility, and structural adaptability. The strength of Intramolecular Charge Transfer (ICT) plays a pivotal role in determining the performance of these devices. To enhance the ICT strength and explore new applications for D-A molecules, we meticulously designed a pair of symmetric dimethylamino-substituted bi-1,3,4-oxadiazole derivatives (DMAOXD and DMAOXDBEN). These symmetric D-A-A-D molecules, with strong electron donor terminals, displayed a modest redshift of less than 25 nm in the UV-vis absorption spectra. However, there was a significant redshift in the emission spectra (140 nm for DMAOXD and 170 nm for DMAOXDBEN) when transitioning from cyclohexane to dimethyl sulfoxide, indicating a pronounced ICT characteristic. Theoretical calculations support the idea that the dimethylaminophenyl unit serves as an electron donor in both DMAOXD and DMAOXDBEN, while the 1,3,4-oxadiazole and central benzene ring act as acceptors. The pronounced ICT characteristic observed in DMAOXD and DMAOXDBEN can be attributed to long-distance electron transfer. Additionally, it's noteworthy that the emission of DMAOXD and DMAOXDBEN solution samples can be quenched by adding trifluoroacetic acid (TFA) and restored by the addition of triethylamine (TEA). Inspired by this, a pattern created with ink samples containing DMAOXD and DMAOXDBEN can be concealed through fumigation with TFA and subsequently revealed by treating them with TEA, suggesting their potential use in data encryption.

Domino protocol for the synthesis of diversely functionalized derivatives of a novel fused pentacyclic antioxidant/anticancer fluorescent scaffold: Pyrazolo[5'',1'':2',3']pyrimido[4',5':5,6][1,4]thiazino[2,3-b]quinoxaline

Rising to the challenge of formidable multi-step reaction needed for the synthesis of polycyclic compounds, an efficient one-pot two-step procedure for the synthesis of densely functionalized novel pyrazolo[5″,1'':2',3']pyrimido[4',5':5,6] [1,4]thiazino[2,3-b]quinoxalines from synthetically accessible starting materials 6-bromo-7-chloro-3-cyano-2-(ethylthio)-5-methylpyrazolo[1,5-a]pyrimidine, 3-aminoquinoxaline-2-thiol and some readily accessible alkyl halides was established. The domino reaction pathway involves cyclocondensation/N-alkylation sequence in K₂CO₃/N,N-dimethyl formamide under heating condition. DPPH free radical scavenging activity of all synthesized pyrazolo[5″,1'':2',3']pyrimido[4',5':5,6][1,4]thiazino[2,3-b]quinoxalines was evaluated to determine their antioxidant potentials. IC₅₀ values were recorded in the range of 29-71 μM. N-benzyl substituted derivative represented the most effective antioxidant activity as well as antiproliferative activity against MCF-7 cells. Moreover, fluorescence in solution for these compounds exhibited strong red emission in the visible region (λ_flu. = 536-558 nm) with good to excellent quantum yields (61-95%). Due to their interesting fluorescence properties, these novel pentacyclic fluorophores can be used as fluorescent markers and probes for studies in biochemistry and pharmacology.

Excited-State Lifetime Modulation by Twisted and Tilted Molecular Design in Carbene-Metal-Amide Photoemitters

Carbene-metal-amides (CMAs) are an emerging class of photoemitters based on a linear donor-linker-acceptor arrangement. They exhibit high flexibility about the carbene-metal and metal-amide bonds, leading to a conformational freedom which has a strong influence on their photophysical properties. Herein we report CMA complexes with (1) nearly coplanar, (2) twisted, (3) tilted, and (4) tilt-twisted orientations between donor and acceptor ligands and illustrate the influence of preferred ground-state conformations on both the luminescence quantum yields and excited-state lifetimes. The performance is found to be optimum for structures with partially twisted and/or tilted conformations, resulting in radiative rates exceeding 1 × 106 s-1. Although the metal atoms make only small contributions to HOMOs and LUMOs, they provide sufficient spin-orbit coupling between the low-lying excited states to reduce the excited-state lifetimes down to 500 ns. At the same time, high photoluminescence quantum yields are maintained for a strongly tilted emitter in a host matrix. Proof-of-concept organic light-emitting diodes (OLEDs) based on these new emitter designs were fabricated, with a maximum external quantum efficiency (EQE) of 19.1% with low device roll-off efficiency. Transient electroluminescence studies indicate that molecular design concepts for new CMA emitters can be successfully translated into the OLED device.

Color-Tunable All-Fluorescent White Organic Light-Emitting Diodes with a High External Quantum Efficiency Over 30% and Extended Device Lifetime

White organic light-emitting diodes (WOLEDs) with high efficiencies and tunable colors attracts considerable interest from the industry and academia. Thermally activated delayed-fluorescence (TADF) emitters can revolutionize such WOLED devices; however, they still suffer from poor performances. In this study, an advanced double-emissive-layer device architecture capable of hole-trapping TADF-sensitized emissions is proposed to not only achieve a recombination zone shift for the tunable colors but also accelerate exciton emission dynamics for high efficiency and alleviated roll-off. The proof-of-concept WOLEDs exhibit significant shifts in their Commission Internationale de l'Eclairage (CIE) coordinates and correlated color temperatures from (0.40, 0.47) and 4088 K at 100 cd m^-2 to (0.27, 0.33) and 9269 K at 5000 cd m^-2 . Additionally, the maximum external quantum efficiency (EQE) reaches 30.7% and remains >25% over a wide luminance range of 500-5000 cd m^-2 , along with an extended LT80 of over 20 000 h at an initial luminance of 100 cd m^-2 . This is the first time that all-fluorescent WOLEDs have been used to realize an EQE exceeding 30%, thereby establishing a new benchmark in this field.

Twisted intramolecular charge transfer of nitroaromatic push-pull chromophores

The structural changes during the intramolecular charge transfer (ICT) of nitroaromatic chromophores, 4-dimethylamino-4′-nitrobiphenyl (DNBP) and 4-dimethylamino-4′-nitrostilbene (DNS) were investigated by femtosecond stimulated Raman spectroscopy (FSRS) with both high spectral and temporal resolutions. The kinetically resolved Raman spectra of DNBP and DNS in the locally-excited and charge-transferred states of the S₁ state appear distinct, especially in the skeletal vibrational modes of biphenyl and stilbene including ν_8a and ν_C=C. The ν_8a of two phenyls and the ν_C=C of the central ethylene group (only for stilbene), which are strongly coupled in the planar geometries, are broken with the twist of nitrophenyl group with the ICT. Time-resolved vibrational spectroscopy measurements and the time-dependent density functional theory simulations support the ultrafast ICT dynamics of 220–480 fs with the twist of nitrophenyl group occurring in the S₁ state of the nitroaromatic chromophores. While the ICT of DNBP occurs via a barrier-less pathway, the ICT coordinates of DNS are strongly coupled to several low-frequency out-of-phase deformation modes relevant to the twist of the nitrophenyl group.

Intramolecular charge transfer of a push-pull chromophore with restricted internal rotation of an electron donor

Intramolecular charge transfer (ICT) of 4-(dicyanomethylene)-2-methyl-6-[2-(2,3,6,7-tetrahydro-1H,5H-benzo[ij]quinolizin-9-yl)vinyl]-4H-pyran (LD688) in DMSO solution was investigated by femtosecond stimulated Raman spectroscopy (FSRS) with 403 nm excitation. The molecular structure of LD688 is similar to that of a well-known push-pull chromophore, 4-dicyanomethylene-2-methyl-6-(p-dimethylaminostyryl)-4H-pyran (DCM), except that the internal rotation of the electron-donating dimethylamino group is restricted with the introduction of the julolidine moiety. Upon photo-excitation, LD688 shows an ultrafast (1.0 ps) ICT followed by the vibrational relaxation (3-8 ps) in the charge-transfer (CT) state. Two distinct Raman spectra of LD688 in the locally excited (LE) and CT state of the S₁ state were retrieved from FSRS measurements. Based on the time-dependent density functional theory (TDDFT) simulations, a "twisted" julolidine geometry of LD688 was proposed for the ICT state, which was further confirmed in comparison to the spectral changes of several push-pull chromophores with the π-conjugated backbone of stilbene, biphenyl, styrylpyran, styrylpyridinium, and styrene in terms of the skeletal vibrational modes of ν_19b,py, ν_CC,ph, and ν_CN.

High Efficiency Solution-Processed Green Thermally Activated Delayed Fluorescence OLEDs using Polymer-Small Molecule Mixed Host

Development of suitable host materials for application to an emitter is of significant importance for the high-efficiency organic light-emitting diodes (OLEDs). In this study, we successfully synthesized poly(9,9-diphenyl-10-(4-vinylbenzyl)-9,10-dihydroacridine) (P(Bn-DPAc)) as...

Intramolecular Charge Transfer of 1-Aminoanthraquinone and Ultrafast Solvation Dynamics of Dimethylsulfoxide

The intramolecular charge transfer (ICT) of 1-aminoanthraquinone (AAQ) in the excited state strongly depends on its solvent properties, and the twisted geometry of its amino group has been recommended for the twisted ICT (TICT) state by recent theoretical works. We report the transient Raman spectra of AAQ in a dimethylsulfoxide (DMSO) solution by femtosecond stimulated Raman spectroscopy to provide clear experimental evidence for the TICT state of AAQ. The ultrafast (~110 fs) TICT dynamics of AAQ were observed from the major vibrational modes of AAQ including the ν_C-N + δ_CH and ν_C=O modes. The coherent oscillations in the vibrational bands of AAQ strongly coupled to the nuclear coordinate for the TICT process have been observed, which showed its anharmonic coupling to the low frequency out of the plane deformation modes. The vibrational mode of solvent DMSO, ν_S=O showed a decrease in intensity, especially in the hydrogen-bonded species of DMSO, which clearly shows that the solvation dynamics of DMSO, including hydrogen bonding, are crucial to understanding the reaction dynamics of AAQ with the ultrafast structural changes accompanying the TICT.

Approaching Nearly 40% External Quantum Efficiency in Organic Light Emitting Diodes Utilizing a Green Thermally Activated Delayed Fluorescence Emitter with an Extended Linear Donor-Acceptor-Donor Structure

Thermally activated delayed fluorescence (TADF) emitters featuring preferential horizontal emitting dipole orientation (EDO) are in urgent demand for enhanced optical outcoupling efficiency in organic light-emitting diodes (OLEDs). However, simultaneously manipulating EDO and optoelectronic properties remains a formidable challenge. Here, an extended linear D-A-D structure with both enlarged donor (D) and acceptor (A) π-systems is established, not only elaborately manipulating parallel horizontal molecular orientation and EDO along its long axis by multi-driving-forces for a high horizontal dipole ratio (Θ_// ), but also delocalizing distribution of frontier energy levels for optimized electronic properties. The proof-of-the-concept emitter simultaneously affords a high Θ_// of 92%, a high photoluminescence quantum yield of 95%, and a fast reverse intersystem crossing rate of 1.16 × 10⁶ s^-1 . The corresponding OLED achieves a champion maximum external quantum efficiency of 39.1% among all green TADF devices without any external light-extraction techniques, together with a maximum power efficiency of 112.0 lm W^-1 and alleviated efficiency roll-off. These findings may inspire even better full-color TADF emitters that push the device efficiency toward the theoretical limits.

Efficient Organic Upconversion Devices for Low Energy Consumption and High-Quality Noninvasive Imaging

Infrared upconversion devices (UCDs) enable low-cost visualization of infrared optical signals without utilizing a readout circuit, which is of great significance for biological recognition and noninvasive dynamic monitoring. However, UCDs suffer from inferior photon to photon (p-p) efficiency and high turn-on voltage (V_on ) for upconversion operation, hindering a further expansion in highly resolved infrared imaging. Herein, an efficient organic UCD integrating an interfacial exciplex emitter and a well-designed near-infrared (NIR) detector reveals a high efficiency up to 12.92% and a low V_on down to 1.56 V. The low V_on gives the capacity for detecting weak NIR light down to 3.2 µW cm^-2 , significantly expanding the detection power scale of UCDs. Thus, the imaging linear dynamic range (I-LDR) is highly bias-tunable, ranging from 13.23 to 84.4 dB. The high I-LDR enables highly resolved and strong-penetration bioimaging especially for thick biological sections, indicating great potential in noninvasive defect and pathological detection.

A Method to Realize Efficient Deep-Red Phosphorescent OLEDs with a Broad Spectral Profile and Low Operating Voltages

Organic light-emitting diodes (OLEDs) used as phototherapy light sources require sufficient spectral distribution in the effective wavelength ranges and low operating voltages. Herein, a double emitting layer structure consisting of a red-emitting Ir(piq)2acac and a deep-red Ir(fliq)2acac was designed to generate a broad electroluminescence spectrum. An efficient TCTA:CN-T2T exciplex system was used as the host of the emitting layer, facilitating effective energy transfer from the exciplex host to the red and deep-red phosphors. The materials used in the exciplex host were also used as the carrier transport layers to eliminate the energy barriers and thus increase the current density. The hole injection layer structures were varied to examine the hole injection capabilities and the carrier balance. The resulting optimized phosphorescent OLEDs with a broad spectral profile exhibit a 90% coverage ratio in the target ranges from 630 to 690 nm, together with a high peak efficiency of 19.1% (10.2 cd/A and 13.8 lm/W). The proposed device only needs 5.2 V to achieve a power density of 5 mW/cm2, implying that the device could be driven via two series-connected button cell batteries. These results illustrate the feasibility of our design concepts and demonstrate the realization of a portable and lightweight OLED phototherapy light source.

A Novel Deep Blue LE-Dominated HLCT Excited State Design Strategy and Material for OLED

Deep blue luminescent materials play a crucial role in the organic light-emitting diodes (OLEDs). In this work, a novel deep blue molecule based on hybridized local and charge-transfer (HLCT) excited state was reported with the emission wavelength of 423 nm. The OLED based on this material achieved high maximum external quantum efficiency (EQE) of 4% with good color purity. The results revealed that the locally-excited (LE)-dominated HLCT excited state had obvious advantages in short wavelength and narrow spectrum emission. What is more, the experimental and theoretical combination was used to describe the excited state characteristic and to understand photophysical property.

Stereoisomerization during Molecular Packing

Isomerization is an essential chemical process that often evokes dramatic change of chemical, physical, or biological properties. For a long time, isomerization has been known as a transformation that is induced by certain external energy such as light, heat, or mechanical force. Herein, a new isomerization phenomenon is described, which does not require external energy but simply occurs during molecular packing. The proposed isomerization is demonstrated by a series of symmetric donor-acceptor-donor (D-A-D) molecules, the donor of which may adopt two different stereoisomeric forms. Based on the evidence of the asymmetric isomers in crystals, the occurrence of isomerization during molecular packing is proved. Moreover, the unique asymmetric geometry in the solid state favors the restriction of intramolecular motion, resulting in highly efficient organic solids with quantum yields approaching unity.

Doubly Boron-Doped TADF Emitters Decorated with ortho-Donor Groups for Highly Efficient Green to Red OLEDs

Doubly boron-doped thermally activated delayed fluorescence (TADF) emitters based on a 9,10-diboraanthracene (DBA) acceptor decorated with ortho-donor groups (Cz2oDBA, 2; BuCz2oDBA, 3; DMAC2oDBA, 4) are prepared to realize high-efficiency green-to-red organic light-emitting diodes (OLEDs). X-ray diffraction analyses of 2 and 4 reveal the symmetrical and highly twisted ortho-donor-acceptor-donor (D-A-D) structure of the emitters. The twisted conformation leads to a very small energy splitting (ΔE_ST <0.08 eV) between the excited singlet and triplet states that gives rise to strong TADF, as supported by theoretical studies. Depending on the strength of the donor moieties, the emission color is fine-tuned in the visible region from green (2) to yellow (3) to red (4). Carbazole-containing 2 and 3 exhibit high photoluminescence quantum yields (PLQYs) approaching 100 %, whereas DMAC-substituted 4 is moderately emissive (PLQY=44 %) in a doped host film. Highly efficient green-to-red TADF-OLEDs are realized with the proposed ortho-D-A-D compounds as emitters. The green and yellow OLEDs incorporating Cz2oDBA (2) and BuCz2oDBA (3) emitters exhibit high external quantum efficiencies (EQEs) of 26.6 % and 21.6 %, respectively. In particular, the green device shows an excellent power efficiency above 100 lm W^-1 . A red OLED fabricated with a DMAC2oDBA (4) emitter exhibits a maximum EQE of 10.1 % with an electroluminescence peak at 615 nm.

Precise Exciton Management of Quaternary Emission Layers for Highly Stable Organic Light-Emitting Diodes Based on Thermally Activated Delayed Fluorescence

Simultaneous achievement of both high electroluminescence efficiency and high operational stability in organic light-emitting diodes (OLEDs) is required for their use in various practical applications. Although OLEDs based on thermally activated delayed fluorescence-assisted fluorescence (TAF) are considered to possess a promising device architecture to exploit the full potential of OLEDs, the operational stability of such systems still requires further improvement. In this study, a quaternary emission layer consisting of a combination of TAF and mixed-host systems is developed. OLEDs containing this emission layer show improved operational stability through the management of exciton generation processes while maintaining high electroluminescence efficiency. Furthermore, a gradient of the mixed ratio of the co-host matrix is used to optimize the recombination zone profile in the emission layer, leading to 17 times improvement of the operational lifetime compared with that of the corresponding single-host-based device. This research provides a simple and general method to develop highly stable TAF-OLEDs.

A π-D and π-A Exciplex-Forming Host for High-Efficiency and Long-Lifetime Single-Emissive-Layer Fluorescent White Organic Light-Emitting Diodes

Exciplex-forming hosts with thermally activated delayed fluorescence (TADF) provide a viable opportunity to unlock the full potential of the yet-to-be improved power efficiencies (PEs) and stabilities of all-fluorescent white organic light-emitting diodes (WOLEDs), but this, however, is hindered by the lack of stable blue exciplexes. Here, an advanced exciplex system is proposed by incorporating bipolar charge-transport π-spacers into both the electron-donor (D) and the electron-accepter (A) to increase their distance for hypsochromic-shifted emission while maintaining the superior transporting ability. By using spirofluorene as the π-spacer, 3,3'-bicarbazole as the D-unit, and 2,4,6-triphenyl-1,3,5-triazine as the A-unit, a π-D and π-A exciplex with sky-blue emission and fast reverse intersystem crossing process is thereof constructed. Combining this exciplex-forming host, a blue TADF-sensitizer, and a yellow conventional fluorescent dopant in a single-emissive-layer, the fabricated warm-white-emissive device simultaneously exhibits a low driving voltage of 3.08 V, an external quantum efficiency of 21.4%, and a remarkable T80 (time to 80% of the initial luminance) of >8200 h at 1000 cd m^-2 , accompanied by a new benchmark PE of 69.6 lm W^-1 among all-fluorescent WOLEDs.

Optical Capacitance/Conductance-Voltage Characteristics of Stored Charges in Organic Light-Emitting Diodes

In this paper, capacitance/conductance-voltage characteristics (C/G-V) under illumination was achieved to investigate the dynamic mechanism of stored charges in OLEDs with a structure of ITO/ PEDOT:PSS/PMMA/Alq₃/Al. For all devices, at least two peaks presented in the optical capacitance-voltage curve. Compared to curves of devices under dark, the first peak increased remarkably with a deviation to V_bi, which can be explained in the form of stored charges combined with the optical conductance characteristics. It was also found that a great decrease in capacitance is followed by the collapse of the first peak with PMMA thickness increased. It can account for the presence of interfacial charges, which is proved further by the conductance curves. To the device with 10 nm PMMA, a third peak took place in optical capacitance and it was due to the storage of electrons by PMMA. Also, the first capacitance peak enhanced approximate linearly as the illumination power increased, which can verify the contribution of the stored charges. Additionally, it shows the potential for the stored charges in optical detections.

Efficient and Stable Deep-Blue Fluorescent Organic Light-Emitting Diodes Employing a Sensitizer with Fast Triplet Upconversion

Multiple donor-acceptor-type carbazole-benzonitrile derivatives that exhibit thermally activated delayed fluorescence (TADF) are the state of the art in efficiency and stability in sky-blue organic light-emitting diodes. However, such a motif still suffers from low reverse intersystem crossing rates (k_RISC ) with emission peaks <470 nm. Here, a weak acceptor of cyanophenyl is adopted to replace the stronger cyano one to construct blue emitters with multiple donors and acceptors. Both linear donor-π-donor and acceptor-π-acceptor structures are observed to facilitate delocalized excited states for enhanced mixing between charge-transfer and locally excited states. Consequently, a high k_RISC of 2.36 × 10⁶ s^-1 with an emission peak of 456 nm and a maximum external quantum efficiency of 22.8% is achieved. When utilizing this material to sensitize a blue multiple-resonance TADF emitter, the corresponding device simultaneously realizes a maximum external quantum efficiency of 32.5%, CIE_y ≈ 0.12, a full width at half maximum of 29 nm, and a T80 (time to 80% of the initial luminance) of > 60 h at an initial luminance of 1000 cd m^-2 .

Highly Efficient and Color-Stable Thermally Activated Delayed Fluorescence White Light-Emitting Diodes Featured with Single-Doped Single Emissive Layers

Despite their merits of environmental friendliness, low cost, and large-scale production, thermally activated delayed fluorescence (TADF) based white organic light-emitting diodes (WOLEDs) for daily lighting applications still face the formidable challenges of structural simplification and controllable exciton allocation. Here, the state-of-the-art full-TADF WOLEDs with features of the single-doped single emissive layers (EMLs) and ultrasimple trilayer structure are demonstrated. The EMLs are binary systems as yellow TADF emitter (4CzTPNBu) doped blue TADF matrix (ptBCzPO₂ TPTZ) with the large steric hindrance and mismatched frontier molecular orbital energy levels to effectively restrain excessive blue-to-yellow triplet exciton transfer and host-dopant interaction induced triplet quenching. Simultaneously, Förster resonance energy transfer is utilized to optimize exciton allocation for the balance of blue and yellow emissions, giving rise to the photoluminescence quantum yield beyond 90%. Consequently, these single-doped EMLs endow their cool white, pure white, and warm white diodes with the high-quality and ultrastable white light and the 100% exciton utilization efficiencies through the extremely simple structures, making them competent for the diverse daily lighting applications.

A Simple Organic Molecule Realizing Simultaneous TADF, RTP, AIE, and Mechanoluminescence: Understanding the Mechanism Behind the Multifunctional Emitter

Aggregation-induced emission (AIE), thermally activated delayed fluorescence (TADF), room-temperature phosphorescence (RTP), and mechanoluminescence (ML) have attracted widespread interest. However, a multifunctional organic emitter exhibiting simultaneous AIE, TADF, RTP, and ML has not been reported. Now, two multifunctional blue emitters with very simple structures, mono-DMACDPS and Me-DMACDPS, exhibit typical AIE, TADF, and RTP properties but different behavior in mechanoluminescence. Crystal structure analysis reveals that large dipole moment and multiple intermolecular interactions with tight packing mode endow mono-DMACDPS with strong ML. Combined with the data of crystal analysis and theoretical calculation, the separated monomer and dimer in the crystal lead to the typical TADF and RTP properties, respectively. Simple-structure mono-DMACDPS is the first example realizing TADF, RTP, AIE, and ML simultaneously.

Enhanced Light Extraction from Bottom Emission OLEDs by High Refractive Index Nanoparticle Scattering Layer

High refractive index nanoparticle material was applied as a scattering layer on the inner side of a glass substrate of a bottom emission organic light emitting diode (OLED) device to enhance light extraction and to improve angular color shift. TiO₂ and YSZ (Yttria Stabilized Zirconia; Y₂O₃-ZrO₂) were examined as the high refractive index nanoparticles. The nanoparticle material was formed as a scattering layer on a glass substrate by a coating method, which is generally used in the commercial display manufacturing process. Additionally, a planarization layer was coated on the scattering layer with the same method. The implemented nanoparticle material and planarization material endured, without deformation, the subsequent thermal annealing process, which was carried out at temperature ranged to 580 °C. We demonstrated a practical and highly efficient OLED device using the conventional display manufacturing process by implementing the YSZ nanoparticle. We obtained a 38% enhanced luminance of the OLED device and a decreased angular color change compared to a conventional OLED device.

Understanding and Manipulating the Interplay of Wide-Energy-Gap Host and TADF Sensitizer in High-Performance Fluorescence OLEDs

Comprising an emitting layer (EML) constituting a wide-energy-gap host, a thermally activated delayed fluorescence (TADF) sensitizer and a conventional fluorescent dopant, TADF-sensitizing-fluorescence organic light-emitting diodes (TSF-OLEDs) highly depend on component interplay to maximize their performance, which, however, is still under-researched. Taking the host type (TADF or non-TADF) and the recombination position (on the host or on the TADF sensitizer) into consideration, the interplay of host and TADF sensitizer is comprehensively studied and manipulated. A wide-energy-gap host with TADF and recombination of charges on it are both required to maximize device performances by triggering multiple sensitizing processes to eliminate exciton losses. Based on those findings, a maximum external quantum efficiency (EQE)/power efficiency (PE) of 23.2%/76.9 lm W^-1 is realized with a newly developed TADF host, significantly outperforming the reference devices. Further device optimization leads to unprecedently high EQE/PE of 24.2%/89.5 lm W^-1 and a half-lifetime of over 400 h at an initial luminance of 2000 cd m^-2 , with the peak PE being the highest value among the reported TSF-OLEDs. This work reveals the importance of manipulating the component interplay in EMLs, opening a new avenue toward highly efficient TSF-OLEDs.

Exciplex Organic Light-Emitting Diodes with Nearly 20% External Quantum Efficiency: Effect of Intermolecular Steric Hindrance between the Donor and Acceptor Pair

Exciplex emitters have emerged as an important class of thermally activated delayed fluorescence (TADF) materials for highly efficient OLEDs. A TADF exciplex emitter requires an intermolecular donor/acceptor pair. We have synthesized a bipolar donor-type material, DPSTPA, which was used to pair with known acceptor materials (2CzPN, 4CzIPN, or CzDBA). The OLEDs based on the exciplex emitters, DPSTPA/X, where X = 2CzPN and CzDBA, give green and orange-red colors with record-high external quantum efficiencies (EQEs) of 19.0 ± 0.6 and 14.6 ± 0.4%, respectively. In contrast, the exciplex pair DPSTPA/4CzIPN gave a very low photoluminescence quantum yield (PLQY) and a very low EQE value of the device. The DFT calculations indicate that the intermolecular distance between the donor and the acceptor plays a key factor for the PLQY and EQE. The observed low PLQY and the poor device performance for the DPSTPA/4CzIPN pair are probably because of the relatively long distance between the DPSTPA and 4CzIPN in the thin film caused by the four congested carbazole (Cz) groups of 4CzIPN, which effectively block the interaction of the nitrile acceptor with the triphenylamino donor of DPSTPA.

Recent Applications of Interfacial Exciplex as Ideal Host of Power-Efficient OLEDs

Currently, exploring the applications of intermolecular donor-acceptor exciplex couple as host of OLEDs with phosphorescence, thermally activated delayed fluorescence (TADF) or fluorescence emitter as dopant is a hot topic. Compared to other host strategies, interfacial exciplex has the advantage in various aspects, such as barrier-free charge injection, unimpeded charge transport, and the energy-saving direct exciton formation process at the “Well”-like heterojunction interface region. Most importantly, due to a very fast and efficient reverse intersystem-crossing (RISC) process, such a host is capable of regulating singlet/triplet exciton populations in itself as well as in the dopant emitters both under photoluminescent (PL) and electroluminescent (EL) driving conditions. In this mini-review, we briefly summarize and comment on recent applications of this ideal host in OLEDs (including both thermal-evaporation OLEDs and solution-processed OLEDs) with diverse emitters, e.g., fluorescence, phosphorescence, delayed fluorescence, or others. Special attention is given to illustrate the peculiar achievement of high overall EL performance with superiorities of low driving voltages, slow roll-off rate, high power efficiencies and satisfied device lifetime using this host strategy, which is then concluded by personal perspectives on the relevant next-step in this field.

Controlling Horizontal Dipole Orientation and Emission Spectrum of Ir Complexes by Chemical Design of Ancillary Ligands for Efficient Deep-Blue Organic Light-Emitting Diodes

Deep-blue emitting Iridium (Ir) complexes with horizontally oriented emitting dipoles are newly designed and synthesized through engineering of the ancillary ligand, where 2',6'-difluoro-4-(trimethylsilyl)-2,3'-bipyridine (dfpysipy) is used as the main ligand. Introduction of a trimethylsilyl group at the pyridine and a nitrogen at the difluoropyrido group increases the bandgap of the emitter, resulting in deep-blue emission. Addition of a methyl group (mpic) to a picolinate (pic) ancillary ligand or replacement of an acetate structure of pic with a perfluoromethyl-triazole structure (fptz) increases the horizontal component of the emitting dipoles in sequence of mpic (86%) > fptz (77%) > pic (74%). The organic light-emitting diode (OLED) using the Ir complex with the mpic ancillary ligand shows the highest external quantum efficiency (31.9%) among the reported blue OLEDs with a y-coordinate value lower than 0.2 in the 1931 Commission Internationale de L'Eclairage (CIE) chromaticity diagram.

Design of Efficient Exciplex Emitters by Decreasing the Energy Gap Between the Local Excited Triplet (3LE) State of the Acceptor and the Charge Transfer (CT) States of the Exciplex

A series of thermally activated delayed fluorescence (TADF) exciplex based on the TX-TerPy were constructed. The electronic coupling between the triplet local excited states (³LE) of the donors and acceptor and the charge transfer states had a great influence on the triplet exciton harvesting and Φ_PL. Herein, based on this strategy, three donor molecules TAPC, TCTA, and m-MTDATA were selected. The local triplet excited state (³LE) of the three donors are 2.93, 2.72 and 2.52 eV in pure films. And the ³LE of TX-TerPy is 2.69 eV in polystyrene film. The energy gap between the singlet charge transfer (¹CT) states of TAPC:TX-TerPy (7:1), TCTA:TX-TerPy (7:1) and the ³LE of TX-TerPy are 0.30 eV and 0.20 eV. Finally, the Φ_PL of TAPC:TX-TerPy (7:1) and TCTA:TX-TerPy (7:1) are 65.2 and 69.6%. When we changed the doping concentration of the exciplex from 15% to 50%, the ratio of the triplet decreased, and Φ_PL decreased by half, perhaps due to the increased energy gap between ¹CT and ³LE. Therefore, optimizing the ¹CT, ³CT, and ³LE facilitated the efficient exciplex TADF molecules.

Predicting Operational Stability for Organic Light-Emitting Diodes with Exciplex Cohosts

Organic light-emitting diodes (OLEDs) employing exciplex cohosts have gained attractive interest due to the promising high efficiency, low driving voltage, and potential low cost in future solid-state lighting sources and full-color displays. However, their device lifetime is still the most challenging weakness and rarely studied, which is regarded as a time consuming and complicated work. Therefore, a simplified but effective and comprehensive approach is demonstrated to give prediction for the exciplex cohosts operating lifespan and analyze their possible degradation mechanisms by considering molecular dissociated activation energy with internal exciton dynamics correlations. As a consequence, strong chemical bond stability for the hole transport moieties and rapid reactive exciton relaxation have the intrinsic talent to access potentially long-lived exciplex cohosts, achieving an extended lifetime of 10169 h for the predicted long-lived exciplex cohost OLEDs. Degradation behaviors further confirm that the deteriorated source is attributed to the formation of exciton quenchers and hole traps from excited states and charged-excited states, respectively. The current findings establish a universal technique to screen the stable exciplex cohost candidates with economic time consumption and expenses.

Steric Switching for Thermally Activated Delayed Fluorescence by Controlling the Dihedral Angles between Donor and Acceptor in Organoboron Emitters

Five emitters CzAZB, tBuCzAZB, tmCzAZB, dmAcAZB, and PxzAZB based on dibenzo-1,4-azaborine as the electron acceptors and two identical amine groups as the donors were designed and synthesized. The dihedral angles between the planes of dibenzo-1,4-azaborine acceptors and amine-based donors greatly affect the thermally activated delayed fluorescence (TADF) property of these materials. A simple concept "steric switching" is introduced to predict whether the emitter possesses TADF property. CzAZB and tBuCzAZB, with very high photoluminescence quantum yields (PLQYs) but small dihedral angles, do not show TADF. In contrast, tmCzAZB reveals a PLQY of only 56% but with a large dihedral angle due to the presence of two methyl groups at C1 and C8 of the carbazole groups, the steric switching operates, and the compound shows TADF property with a deep-blue color having CIE coordinates of (0.14, 0.15). In a similar manner, in dmAcAZB and PxzAZB with high PLQYs and large dihedral angles between the donor and acceptor planes, the "TADF steric switch" readily operates to achieve device external quantum efficiencies as high as 20.8 ± 1.2 and 27.5 ± 1.9% with blue and green emissions, respectively.

Thermally Activated Delayed Fluorescent Materials Combining Intra- and Intermolecular Charge Transfers

A novel thermally activated delayed fluorescent (TADF) compound, 9-(3-((4,6-diphenyl-1,3,5-triazin-2-yl)oxy)phenyl)-3,6-diphenyl-9 H-carbazole (PhCz- o-Trz), with a donor-σ-acceptor (D-σ-A) motif is developed. A flexible small space σ-junction is adopted to partly suppress the intramolecular charge transfer (intra-CT) while inversely enhancing the intermolecular charge transfer (inter-CT) between D/A moieties, realizing the coexistence of both intra-CT and inter-CT in an amorphous aggregate. The coexistence of dual CTs increases the complexity of the singlet and triplet state mixing, enhancing the triplet-to-singlet spin-flip transition and thereby the TADF emission. Additionally, PhCz- o-Trz is evaluated not only as an emitter but also as a sensitizing host for fluorescent and phosphorescent dopants, all exhibiting high efficiencies with alleviated efficiency roll-offs. These results shed light on the development of new TADF materials with dual CTs and may further deepen our understanding about TADF mechanisms.

Development of Red Exciplex for Efficient OLEDs by Employing a Phosphor as a Component

Exciplexes are ideal candidates as effective thermally activated delayed fluorescence (TADF) emitters. However, efficient orange and red TADF exciplexes have been reported seldomly, because their significant non-radiative (NR) decay of excited states lead to unavoidable energy loss. Herein, we propose a novel strategy to construct efficient red TADF exciplexes by introducing phosphor as one component. Due to the strong spin-orbit coupling of heavy metal (e.g., Ir, Pt, et al.) ion cores, the NR decays will be evidently decreased for both singlet and triplet excitons, reducing the undesired exciton waste. Moreover, compared with the conventional exciplexes, phosphorescence plays an important role for such novel exciplexes, further improving the exciton utilization. Based on this strategy, we fabricated a red exciplex containing 1,3,5-triazine-2,4,6-triyl)tris(benzene-3,1-diyl)tris(diphenylphosphine oxide) (PO-T2T) and tris(2-phenylpyridine) iridium(III) (Ir(ppy)₃) as components and realize a red emission with a peak at 604 nm, a CIE coordinate of (0.55, 0.44), and a high maximum external quantum efficiency of 5% in organic light-emitting device. This efficiency is 2.6 times higher than that of the device based on the conventional red exciplex emitter, proving the superiority of our novel strategy to construct TADF exciplexes with phosphors.

Exciplex Cohosts Employing Nonconjugated Linked Dicarbazole Donors for Highly Efficient Thermally Activated Delayed Fluorescence-Based Organic Light-Emitting Diodes

Two new nonconjugated linked dicarbazole materials, dCzPSi and dCzPSO₂, with high triplet energy were synthesized and characterized. dCzPSi and dCzPSO₂ were adopted as unipolar host materials for the green thermally activated delayed fluorescence (TADF) emitter (4CzIPN) to achieve high-efficiency organic light-emitting diodes (OLEDs). The electron-transporting acceptor, PO-T2T, was introduced to mix with dCzPSi and dCzPSO₂ to give two new exciplex-forming systems that can improve the exciton formation propensity in the emitting layer. The relevant properties of these new exciplexes were characterized, and they were suggested as promising cohosts for the green TADF emitter, 4CzIPN. The characteristics of the devices employing single hosts (dCzPSi and dCzPSO₂) and exciplex-forming cohosts (dCzPSi:PO-T2T and dCzPSO₂:PO-T2T) were explored. The obtained results indicate that the Si-bridged dicarbazole compound dCzPSi outperforms its counterpart dCzPSO₂ in which two carbazole groups are linked by an SO₂ group. The device employed with the dCzPSi:PO-T2T cohost with 10 wt % 4CzIPN achieved a low V_on of 2.2 V and maximum efficiencies of 21.1% (external quantum efficiency), 56.4 cd A^-1 (current efficiency), 59.1 lm W^-1 (power efficiency), as compared to those (18.7%, 56.6 cd A^-1, and 68.5 lm W^-1) of the dCzPSO₂:PO-T2T-hosted device. This work verifies the advantages of using a cohost that can form an exciplex for boosting the device efficiency with reduced efficiency roll-off of TADF-based OLEDs.

Origin and Control of Orientation of Phosphorescent and TADF Dyes for High-Efficiency OLEDs

It has been known for decades that the emitting dipole orientation (EDO) of emitting dyes influences the outcoupling efficiency of organic light-emitting diodes (OLEDs). However, the EDO of dopants, especially phosphorescent dopants, has been studied less than that of neat films and polymer emitting layers (EMLs) due to the lack of an apparent driving force for aligning the dopants in amorphous host films. Recently, however, even globular-shaped Ir complexes have been reported to have a preferred orientation in doped films and OLEDs. External quantum efficiencies (EQEs) higher than 30% have also been demonstrated using phosphorescent and thermally activated delayed fluorescent dyes (TADF) doped in EMLs. Here, recent results on the EDO of phosphorescent and TADF dyes doped in host films, and highly efficient OLEDs using these dyes are reviewed. The origin and control of the orientation of phosphors are discussed, followed by a discussion of future strategies to achieve EQEs of over 60% without a light extraction layer, from the material point of view.