"Wiring" Fe-Nx -Embedded Porous Carbon Framework onto 1D Nanotubes for Efficient Oxygen Reduction Reaction in Alkaline and Acidic Media

Precisely Designed Morphology and Surface Chemical Structure of Fe-N-C Electrocatalysts for Enhanced Oxygen Reaction Reduction Activity

Fe-N-C materials have been regarded as one of the potential candidates to replace traditional noble-metal-based electrocatalysts for the oxygen reduction reaction (ORR). It is believed that the structure of carbon support in Fe-N-C materials plays an essential role in highly efficient ORR. However, precisely designing the morphology and surface chemical structure of carbon support remains a challenge. Herein, we present a novel synthetic strategy for the preparation of porous carbon spheres (PCSs) with high specific surface area, well-defined pore structure, tunable morphology and controllable heteroatom doping. The synthesis involves Schiff-based polymerization utilizing octaaminophenyl polyhedral oligomeric silsesquioxane (POSS-NH2) and heteroatom-containing aldehydes, followed by pyrolysis and HF etching. The well-defined pore structure of PCS can provide the confinement field for ferroin and transform into Fe-N-C sites after carbonization. The tunable morphology of PCS can be easily achieved by changing the solvents. The surface chemical structure of PCS can be tailored by utilizing different heteroatom-containing aldehydes. After optimizing the structure of PCS, Fe-N-C loading on N,S-codoped porous carbon sphere (NSPCS-Fe) displays outstanding ORR activity in alkaline solution. This work paves a new path for fabrication of Fe-N-C materials with the desired morphology and well-designed surface chemical structure, demonstrating significant potential for energy-related applications.

A lignin-derived N-doped carbon-supported iron-based nanocomposite as high-efficiency oxygen reduction reaction electrocatalyst

Fuel cells are a promising renewable energy technology that depend heavily on noble metal Pt-based catalysts, particularly for the oxygen reduction reaction (ORR). The discovery of new, efficient non-precious metal ORR catalysts is critical for the continued development of cost-effective, high-performance fuel cells. The synthesized carbon material showed excellent electrocatalytic activity for the ORR, with half-wave potential (E1/2) and limiting current density (JL) of 0.88 V and 5.10 mA·cm-2 in alkaline electrolyte, respectively. The material has a Tafel slope of (65 mV dec-1), which is close to commercial Pt/C catalysts (60 mV dec-1). Moreover, the prepared materials exhibited excellent performance when assembled as cathodes for zinc-air batteries. The power density reached 110.02 mW cm-2 and the theoretical specific capacity was 801.21 mAh g-1, which was higher than that of the Pt/C catalyst (751.19 mAh g-1). In this study, with the assistance of Mg5(CO3)4(OH)2·4H2O, we introduce an innovative approach to synthesize advanced carbon materials, achieving precise control over the material's structure and properties. This research bridges a crucial gap in material science, with potential applications in renewable energy technologies, particularly in enhancing catalysts for fuel cells.

Fe Cluster Modified Co9 S8 Heterojunction: Highly Efficient Photoelectrocatalyst for Overall Water Splitting and Flexible Zinc-Air Batteries

Designing bifunctional low-cost photo-assisted electrocatalysts for converting solar and electric energy into hydrogen energy remains a huge challenge. Herein, a heterojunction (Fe cluster modified Co9 S8 loaded on carbon nanotubes, Co9 S8 -Fe@CNT) for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is demonstrated. Benefiting from the good electronic conductivity and spatial confinement of the carbon skeleton, as well as the electronic structure regulation of the Fe cluster, Co9 S8 -Fe@CNT exhibits excellent catalytic performance with a low overpotential of 150 mV for OER and 135 mV for HER at 10 mA cm-2 . Upon light irradiation, holes and electrons are generated in the valence band and conduction band of the Co9 S8 , respectively. Part of the charges are transferred to the interface to facilitate the catalytic reaction, while the remaining are transferred by the electrode. When working as a bifunctional catalyst for overall water splitting, the performance can reach 1.33 V at under light conditions, which is significantly better than 1.52 V in a dark environment. Theoretical calculations revealed lowered Gibbs free energy (∆GH *) of the heterojunction with the effect of Fe modification of Co9 S8 . This work sheds a new light in designing novel photoelectrochemical materials to convert solar and electric energy into chemical energy.

Co-Fe3C pair sites catalyst with heterometallic dual active sites for efficient oxygen reduction reaction

Newly emerging metal-based pair sites catalysts show great potential because they can provide more metal active centers with synergistic effect for green catalysis, compared with single site catalysts. However, both the synthesis and catalytic mechanisms of the pair sites catalyst with new structural features need to be developed vigorously to promote the desired chemical reactions, especially carbon-based metal catalysts for green energy storage and conversion devices. Herein, we constructed highly active Co-Fe3C pair sites on N-doped graphite catalyst (CNCo-Fe3C) by a two-step strategy, which have electron interactions of heterometallic atoms and can play better synergistic effect. X-ray absorption spectra and density functional theory (DFT) calculation further identify the presence of heterometallic active sites in the pair sites catalyst, resulting in electron redistribution and positive d-band center due to the electron interactions. The more positive d-band center model predicts the optimization of the adsorption energy of oxygen-containing intermediates, and reduces the energy barrier of the determining step. This further results in superior oxygen reduction reaction (ORR) performance with a half-wave potential of 0.90 V versus reversible hydrogen electrode (vs.RHE) and superior long-term stability for about 20 h with only 2.3 % decrease at 0.75 V vs.RHE in 0.1 M KOH solution. Additionally, it also shows significant peak power density of 124 mW cm-2 and prominent cycling stability performance exceeding 400 h at 5 mA cm-2 in the Zn-air battery (ZAB) test, which is higher than that of Pt/C catalyst. This work provides a new idea for the regulation of intrinsic activity of non-noble metal ORR catalysts through the synergistic effect of the pair sites.

Cu single-atom catalyst-based flexible hydrogen peroxide electrochemical sensor with oxygen resistance for monitoring ROS bursts

The study of cellular responses linked to oxidative stress mechanisms is crucial in comprehending diverse physiological and pathological life processes, including mitochondrial dysfunction. Nonetheless, despite the interference of O2, the monitoring of ROS released from cells poses a challenging task. In this study, carbon-based copper single-atom catalysts (Cu SACs) were synthesized that exhibits excellent electrocatalytic performance for H2O2 reduction with an initial potential at 0.23 V and effectively avoids interference from O2. Based on this catalyst, a flexible and stretchable oxygen-tolerant sensor was constructed and applied to monitor the calcium ion-induced ROS burst in human umbilical vein endothelial cells (HUVECs) in a simulated physiological condition. This study effectively eradicates interference that may arise from the reduction of O2 and presents a dependable platform for real-time in situ monitoring of physiologically active molecules by utilizing H2O2 detection.

Constructing FeS and ZnS Heterojunction on N,S-Codoped Carbon as Robust Electrocatalyst toward Oxygen Reduction Reaction

Highly active and cost-efficient electrocatalysts for oxygen reduction reaction (ORR) are significant for developing renewable energy conversion devices. Herein, a nanocomposite Fe/ZnS-SNC electrocatalyst with an FeS and ZnS heterojunction on N,S-codoped carbon has been fabricated via a facile one-step sulfonating of the pre-designed Zn- and Fe-organic frameworks. Benefitting from the electron transfer from FeS to adjacent ZnS at the heterointerfaces, the optimized Fe/ZnS-SNC900 catalyst exhibits excellent ORR performances, featuring the half-wave potentials of 0.94 V and 0.81 V in alkaline and acidic media, respectively, which is competitive with the commercial 20 wt.% Pt/C (0.87 and 0.76 V). The flexible Zn-air battery equipping Fe/ZnS-SNC900 affords a higher open-circuit voltage (1.45 V) and power density of 30.2 mW cm-2. Fuel cells assembled with Fe/ZnS-SNC900 as cathodic catalysts deliver a higher power output of 388.3 and 242.8 mW cm-2 in H2-O2 and -air conditions. This work proposes advanced heterostructured ORR electrocatalysts that effectively promote renewable energy conversions.

Self-Sacrificing Template Synthesis of Carbon Nanosheets Assembled Hollow Spheres with Abundant Active Fe-N4 O1 Moieties for Electrocatalytic Oxygen Reduction

Single-atom Fe-N-C (Fe₁ -N-C) materials represent the benchmarked electrocatalysts for oxygen reduction reaction (ORR). However, single Fe atoms in the carbon skeletons cannot be fully utilized due to the mass transfer limitation, severely restricting their intrinsic ORR properties. Herein, a self-sacrificing template strategy is developed to fabricate ultrathin nanosheets assembled Fe₁ -N-C hollow microspheres (denoted as Fe₁ /N-HCMs) by rational carbonization of Fe³⁺ chelating polydopamine coated melamine cyanuric acid complex. The shell of Fe₁ /N-HCMs is constructed by ultrathin nanosheets with thickness of only 2 nm, which is supposed to be an ideal platform to isolate and fully expose single metal atoms. Benefiting from unique hierarchical hollow architecture with highly open porous structure, 2 nm-thick ultrathin nanosheet subunits and abundant Fe-N₄ O₁ active sites revealed by X-ray absorption fine structure analysis, the Fe₁ /N-HCMs exhibit high ORR performance with a positive half-wave potential of 0.88 V versus the reversible hydrogen electrode and robust stability. When served as air-cathode catalysts with ultralow loading mass of 0.25 mg cm^-2 , Fe₁ /N-HCMs based Zn-air batteries present a maximum power density of 187 mW cm^-2 and discharge specific capacity of 806 mA h g_Zn ^-1 in primary Zn-air batteries, all exceeding those of commercial Pt/C.

High entropy alloy nanoparticles encapsulated in graphitised hollow carbon tubes for oxygen reduction electrocatalysis

High entropy alloys (HEAs) with a tunable alloy composition and fascinating synergetic effects between various metals have attracted significant attention in the field of electrocatalysis, but their potential is limited by inefficient and unscalable fabrication methodologies. This work proposes a novel solid-state thermal reaction method to synthesise HEA nanoparticles encapsulated in an N-doped graphitised hollow carbon tube. This facile method is simple and efficient and involves no use of organic solvents during the fabrication process. The synthesized HEA nanoparticles are confined by the graphitised hollow carbon tube, which is possibly beneficial for preventing the aggregation of alloy particles during the oxygen reduction reaction (ORR). In a 0.1 M KOH solution, the HEA catalyst FeCoNiMnCu-1000(1 : 1) exhibits an onset and half-wave potential of 0.92 V and 0.78 V (vs. RHE), respectively. We assembled a Zn-Air battery with FeCoNiMnCu-1000 as a catalyst for the air electrode, and a power density of 81 mW cm^-2 and a long-term durability of >200 h were achieved, which is comparable to the performance of the state-of-the-art catalyst Pt/C-RuO₂. This work herein offers a scalable and green method for synthesising multinary transition metal-based HEAs and highlights the potential of HEA nanoparticles as electrocatalysts for energy storage and conversion.

Rational Design of Flexible Zn-Based Batteries for Wearable Electronic Devices

The advent of 5G and the Internet of Things has spawned a demand for wearable electronic devices. However, the lack of a suitable flexible energy storage system has become the "Achilles' Heel" of wearable electronic devices. Additional problems during the transformation of the battery structure from conventional to flexible also present a severe challenge to the battery design. Flexible Zn-based batteries, including Zn-ion batteries and Zn-air batteries, have long been considered promising candidates due to their high safety, eco-efficiency, substantial reserve, and low cost. In the past decade, researchers have come up with elaborate designs for each portion of flexible Zn-based batteries to improve the ionic conductivities, mechanical properties, environment adaptabilities, and scalable productions. It would be helpful to summarize the reported strategies and compare their pros and cons to facilitate further research toward the commercialization of flexible Zn-based batteries. In this review, the current progress in developing flexible Zn-based batteries is comprehensively reviewed, including their electrolytes, cathodes, and anodes, and discussed in terms of their synthesis, characterization, and performance validation. By clarifying the challenges in flexible Zn-based battery design, we summarize the methodology from previous investigations and propose challenges for future development. In the end, a research paradigm of Zn-based batteries is summarized to fit the burgeoning requirement of wearable electronic devices in an iterative process, which will benefit the future development of Zn-based batteries.

Carbon Nanocage with Maximum Utilization of Atomically Dispersed Iron as Efficient Oxygen Electroreduction Nanoreactor

As key parameters of electrocatalysts, the density and utilization of active sites determine the electrocatalytic performance toward oxygen reduction reaction. Unfortunately, prevalent oxygen electrocatalysts fail to maximize the utilization of active sites due to inappropriate nanostructural design. Herein, a nano-emulsion induced polymerization self-assembly strategy is employed to prepare hierarchical meso-/microporous N/S co-doped carbon nanocage with atomically dispersed FeN₄ (denoted as Meso/Micro-FeNSC). In situ scanning electrochemical microscopy technology reveals the density of available active sites for Meso/Micro-FeNSC reach to 3.57 × 10¹⁴ sites cm^-2 , representing more than threefold improvement compared to micropore-dominant Micro-FeNSC counterpart (1.07 × 10¹⁴ sites cm^-2 ). Additionally, the turnover frequency of Meso/Micro-FeNSC is also improved to 0.69 from 0.50 e^- site^-1 s^-1 for Micro-FeNSC. These properties motivate Meso/Micro-FeNSC as efficient oxygen electroreduction electrocatalyst, in terms of outstanding half-wave potential (0.91 V), remarkable kinetic mass specific activity (68.65 A g^-1 ), and excellent robustness. The assembled Zn-air batteries with Meso/Micro-FeNSC deliver high peak power density (264.34 mW cm^-2 ), large specific capacity (814.09 mA h g^-1 ), and long cycle life (>200 h). This work sheds lights on quantifying active site density and the significance of maximum utilization of active sites for rational design of advanced catalysts.

Isolating Fe Atoms in N-Doped Carbon Hollow Nanorods through a ZIF-Phase-Transition Strategy for Efficient Oxygen Reduction

Transition metal-nitrogen-carbon (TM-N-C) catalysts have been intensely investigated to tackle the sluggish oxygen reduction reactions (ORRs), but insufficient accessibility of the active sites limits their performance. Here, by using solid ZIF-L nanorods as self-sacrifice templates, a ZIF-phase-transition strategy is developed to fabricate ZIF-8 hollow nanorods with open cavities, which can be subsequently converted to atomically dispersed Fe-N-C hollow nanorods (denoted as Fe₁ -N-C HNRs) through rational carbonization and following fixation of iron atoms. The microstructure observation and X-ray absorption fine structure analysis confirm abundant Fe-N₄ active sites are evenly distributed in the carbon skeleton. Thanks to the highly accessible Fe-N₄ active sites provided by the highly porous and open carbon hollow architecture, the Fe₁ -N-C HNRs exhibit superior ORR activity and stability in alkaline and acidic electrolytes with very positive half-wave potentials of 0.91 and 0.8 V versus RHE, respectively, both of which surpass those of commercial Pt/C. Remarkably, the dynamic current density (J_K ) of Fe₁ -N-C HNRs at 0.85 V versus RHE in alkaline media delivers a record value of 148 mA cm^-2 , 21 times higher than that of Pt/C. The assembled Zn-air battery using Fe₁ -N-C HNRs as cathode catalyst exhibits a high peak power density of 208 mW cm^-2 .

Non-Noble Metal Catalysts in Cathodic Oxygen Reduction Reaction of Proton Exchange Membrane Fuel Cells: Recent Advances

The oxygen reduction reaction (ORR) is one of the crucial energy conversion reactions in proton exchange membrane fuel cells (PEMFCs). Low price and remarkable catalyst performance are very important for the cathode ORR of PEMFCs. Among the various explored ORR catalysts, non-noble metals (transition metal: Fe, Co, Mn, etc.) and N co-doped C (M-N-C) ORR catalysts have drawn increasing attention due to the abundance of these resources and their low price. In this paper, the recent advances of single-atom catalysts (SACs) and double-atom catalysts (DACs) in the cathode ORR of PEMFCs is reviewed systematically, with emphasis on the synthesis methods and ORR performance of the catalysts. Finally, challenges and prospects are provided for further advancing non-noble metal catalysts in PEMFCs.

Strategic design of Fe and N co-doped hierarchically porous carbon as superior ORR catalyst: from the perspective of nanoarchitectonics

In this study, we present microporous carbon (MPC), hollow microporous carbon (HMC) and hierarchically porous carbon (HPC) to demonstrate the importance of strategical designing of nanoarchitectures in achieving advanced catalyst (or electrode) materials, especially in the context of oxygen reduction reaction (ORR). Based on the electrochemical impedance spectroscopy and ORR studies, we identify a marked structural effect depending on the porosity. Specifically, mesopores are found to have the most profound influence by significantly improving electrochemical wettability and accessibility. We also identify that macropore contributes to the rate capability of the porous carbons. The results of the rotating ring disk electrode (RRDE) method also demonstrate the advantages of strategically designed double-shelled nanoarchitecture of HPC to increase the overall electron transfer number (n) closer to four by offering a higher chance of the double two-electron pathways. Next, selective doping of highly active Fe-N x sites on HPC is obtained by increasing the nitrogen content in HPC. As a result, the optimized Fe and N co-doped HPC demonstrate high ORR catalytic activity comparable to the commercial 20 wt% Pt/C in alkaline electrolyte. Our findings, therefore, strongly advocate the importance of a strategic design of advanced catalyst (or electrode) materials, especially in light of both structural and doping effects, from the perspective of nanoarchitectonics.

Revealing the Real Role of Etching during Controlled Assembly of Nanocrystals Applied to Electrochemical Reduction of CO2

In recent years, the use of inexpensive and efficient catalysts for the electrocatalytic CO₂ reduction reaction (CO₂RR) to regulate syngas ratios has become a hot research topic. Here, a series of nitrogen-doped iron carbide catalysts loaded onto reduced graphene oxide (N-Fe₃C/rGO-H) were prepared by pyrolysis of iron oleate, etching, and nitrogen-doped carbonization. The main products of the N-Fe₃C/rGO-H electrocatalytic reduction of CO₂ are CO and H₂, when tested in a 0.5 M KHCO₃ electrolyte at room temperature and pressure. In the prepared catalysts, the high selectivity (the Faraday efficiency of CO was 40.8%, at −0.3 V), and the total current density reaches ~29.1 mA/cm² at −1.0 V as demonstrated when the mass ratio of Fe₃O₄ NPs to rGO was equal to 100, the nitrogen doping temperature was 800 °C and the ratio of syngas during the reduction process was controlled by the applied potential (−0.2~−1.0 V) in the range of 1 to 20. This study provides an opportunity to develop nonprecious metals for the electrocatalytic CO₂ reduction reaction preparation of synthesis and gas provides a good reference

A Single-Atom Fe-N-C Catalyst with Ultrahigh Utilization of Active Sites for Efficient Oxygen Reduction

Fe-N-C single-atom catalysts (SACs) are emerging as a promising class of electrocatalysts for the oxygen reduction reaction (ORR) to replace Pt-based catalysts. However, due to the limited loading of Fe for SACs and the inaccessibility of internal active sites, only a small portion of the sites near the external surface are able to contribute to the ORR activity. Here, this work reports a metal-organic framework-derived Fe-N-C SAC with a hierarchically porous and concave nanoarchitecture prepared through a facile but effective strategy, which exhibits superior electrocatalytic ORR activity with a half-wave potential of 0.926 V (vs RHE) in alkaline media and 0.8 V (vs RHE) in acidic media while maintaining excellent stability. The superior ORR activity of the as-designed catalyst stems from the unique architecture, where the hierarchically porous architecture contains micropores as Fe SAC anchoring sites, meso-/macro-pores as accessible channels, and concave shell for increasing external surface area. The unique architecture has dramatically enhanced the utilization of previously blocked internal active sites, as confirmed by a high turnover frequency of 3.37 s^-1 and operando X-ray absorption spectroscopy analysis with a distinct shift of adsorption edge.

Electrostatic Interaction in Amino Protonated Chitosan-Metal Complex Anion Hydrogels: A Simple Approach to Porous Metal Carbides/N-Doped Carbon Aerogels for Energy Conversion

In the face of the increasingly serious rapid depletion of fossil fuels, exploring alternative energy conversion technologies may be a promising choice to alleviate this crisis. Transition metal carbides (TMCs)/carbon composites are considered as prospective electrocatalysts due to their high catalytic activities and structural stability. In this work, we report the simple synthesis of TMCs/N-doping carbon aerogels (TMCs/NCAs, including Fe₃C/NCA, Mo₃C₂/NCA, and Fe₃C-Mo₂C/NCA) for the oxygen reduction reaction (ORR) using protonated chitosan/metal complex anion-chelated aerogels. Among them, the Fe₃C/NCA composite possesses efficient ORR activity (similar to Pt/C), and the Fe₃C/NCA-assembled Zn-air battery exhibits high power densities of about 250 mW cm^-2. The density functional theory calculation reveals that the presence of graphite-N, pyridine-N, and carbon defects in the carbon framework effectively reduces the free energy of ORR occurring in Fe₃C. This work provides a simple and extensible strategy for the preparation of TMCs from chitosan, which is expected to be extended to other metal carbides.

Recent Advances in ZIF-Derived Atomic Metal-N-C Electrocatalysts for Oxygen Reduction Reaction: Synthetic Strategies, Active Centers, and Stabilities

Exploring highly active, stable electrocatalysts with earth-abundant metal centers for the oxygen reduction reaction (ORR) is essential for sustainable energy conversion. Due to the high cost and scarcity of platinum, it is a general trend to develop metal-N-C (M-N-C) electrocatalysts, especially those prepared from the zeolite imidazolate framework (ZIF) to replace/minimize usage of noble metals in ORR electrocatalysis for their amazingly high catalytic efficiency, great stability, and readily-tuned electronic structure. In this review, the most pivotal advances in mechanisms leading to declined catalytic performance, synthetic strategies, and design principles in engineering ZIF-derived M-N-C for efficient ORR catalysis, are presented. Notably, this review focuses on how to improve intrinsic ORR activity, such as M-N_x -C_y coordination structures, doping metal-free heteroatoms in M-N-C, dual/multi-metal sites, hydrogen passivation, and edge-hosted M-N_x . Meanwhile, how to increase active sites density, including formation of M-N complex, spatial confinement effects, and porous structure design, are discussed. Thereafter, challenges and future perspectives of M-N-C are also proposed. The authors believe this instructive review will provide experimental and theoretical guidance for designing future, highly active ORR electrocatalysts, and facilitate their applications in diverse ORR-related energy technologies.

Ultrafast Kinetics in a PAN/MgFe2O4 Flexible Free-Standing Anode Induced by Heterojunction and Oxygen Vacancies

Flexibility and power density are key factors restricting the development of flexible lithium-ion batteries (FLIBs). Interface and defect engineering can modify the intrinsic ion/electron kinetics by regulating the electronic structure. Herein, a polyacrylonitrile/MgFe₂O₄ (PAN-MFO) electrode with heterojunction and oxygen vacancies was first designed and synthesized as a flexible free-standing anode of FLIBs by electrostatic spinning technology. The PAN carbon nanofiber (PAN-CNF) as the skeleton structure provides fast conductive channels, buffers the volume expansion, and enhances the cycle stability. The heterostructure constructs the internal electric field, facilitates the Li⁺/charge transfer, intensifies the Li⁺ adsorption energy, and enhances the interfacial lithium storage. Oxygen vacancies improve the intrinsic conductivity, lower the Li⁺ diffusion barrier, weaken the Fe-O bonding, and facilitate the conversion reaction. Because of the synergistic effect of the multifunctional structure, the PAN-MFO shows superior cycle and rate performance with ultrafast kinetics. Flexible LiCoO₂/PAN-MFO full pouch cells were also assembled that demonstrated a stable cycle performance and power supply in both the plain and bent states.

Metal-Organic Frameworks Derived Electrocatalysts for Oxygen and Carbon Dioxide Reduction Reaction

The increasing demands of energy and environmental concerns have motivated researchers to cultivate renewable energy resources for replacing conventional fossil fuels. The modern energy conversion and storage devices required high efficient and stable electrocatalysts to fulfil the market demands. In previous years, we are witness for considerable developments of scientific attention in Metal-organic Frameworks (MOFs) and their derived nanomaterials in electrocatalysis. In current review article, we have discussed the progress of optimistic strategies and approaches for the manufacturing of MOF-derived functional materials and their presentation as electrocatalysts for significant energy related reactions. MOFs functioning as a self-sacrificing template bid different benefits for the preparation of metal nanostructures, metal oxides and carbon-abundant materials promoting through the porous structure, organic functionalities, abundance of metal sites and large surface area. Thorough study for the recent advancement in the MOF-derived materials, metal-coordinated N-doped carbons with single-atom active sites are emerging candidates for future commercial applications. However, there are some tasks that should be addressed, to attain improved, appreciative and controlled structural parameters for catalytic and chemical behavior.

Nitrogen doped CuCo2O4 nanoparticles anchored on beaded-like carbon nanofibers as an efficient bifunctional oxygen catalyst toward zinc-air battery

The elaborative design and construction of first-rank bifunctional oxygen electrocatalysts featuring low price, high activity and strong stability is critical for the large-scale applications of rechargeable Zn-air batteries. Here, a resultful strategy is proposed for fabricating nitrogen-doped 1D beaded-like structure carbon nanofibers uniformly decorated with nitrogen-doped CuCo₂O₄ nanoparticles (N-CuCo₂O₄@CNFs) toward boosting oxygen evolution reaction/oxygen reduction reaction (OER/ORR) catalysis. Taking advantage of the synergistic effect between interconnected 1D hierarchical porous carbon nanofiber structure and high catalytic activity of N-doped CuCo₂O₄ nanoparticles derived from bimetallic MOFs, the N-CuCo₂O₄@CNFs catalysts possess enhanced reaction kinetics and preferable charge transfer ability. Impressively, the obtained catalysts exhibit prominent electrocatalytic ability and superior stability for OER/ORR, even surpass the commercial RuO₂ and Pt/C. More significantly, the Zn-air batteries employing the N-CuCo₂O₄@CNFs-800 as cathode display a higher power density of 175.6 mW cm^-2, a lower charge-discharge voltage gap of 0.82 V at 10 mA cm^-2, as well as a better cycling stability with respect to those of Pt/C + RuO₂ mixture, demonstrating the great potential of N-CuCo₂O₄@CNF as a high-efficiency catalyst for clean energy devices.

An iron based organic framework coated with nickel hydroxide for energy storage, conversion and detection

Although electrode materials based on metal organic frameworks (MOFs) were widely studied in the electrochemistry field, the origin of poor conductivity is still a bottleneck restricting their development. Herein, we constructed a conductive circuit by growing a layer of hydroxide on the surface of the Fe-MOF, and composite materials (Fe-MOF@Ni(OH)₂) are applied in the fields of supercapacitor, OER, and electrochemical sensing. Fe-MOF@Ni(OH)₂ not only maintains the intrinsic advantages of Fe-MOF, but also improves the electrical conductivity. Fe-MOF@Ni(OH)₂ exhibits a high specific capacity of 188 mAh g^-1 at 1 A g^-1 . The energy density of the asymmetric supercapacitor (Fe-MOF@Ni(OH)₂-20//AC) reaches 67.1 Wh kg^-1. During the oxygen evolution reaction, the overpotential of the material is 280 mV at 10 mA cm^-2, and the Tafel slope is 37.6 mV dec^-1. The electrochemical sensing tests showed the detection limit of BPA is 5 μM. Hence, these results provide key insights into the design of multifunctional electrode materials.

Designed Synthesis and Catalytic Mechanisms of Non-Precious Metal Single-Atom Catalysts for Oxygen Reduction Reaction

Oxygen reduction reaction (ORR) is the important half-reaction for metal-air batteries and fuel cells (FCs), which plays the decisive role for the performance of whole devices. Developing high-efficiency non-precious metal ORR catalysts is urgent and still challenging. Single-atom catalysts (SACs) are considered to be one of the promising substitutes for Pt due to their maximum atom utilization efficiency and mass activity. Despite considerable efforts in preparing various SACs, the reaction mechanism and intrinsic activity modulation during the ORR reaction are still not understood in-depth. In this review, the latest advances in the current synthetic strategies for SACs are summarized. The effect of various coordination environments including central metal atoms, coordination atoms, environmental atoms, and guest groups on the intrinsic ORR activity of SACs are discussed. The electrocatalytic mechanisms are clarified by combining density functional theory calculations with in situ advanced characterization technologies. Then, the applications of SACs in FCs and Zn-air batteries are reviewed. Finally, the prospects and challenges for further development of SACs are highlighted.

Topological defect-containing Fe/N co-doped mesoporous carbon nanosheets as novel electrocatalysts for the oxygen reduction reaction and Zn-air batteries

Developing effective electrocatalysts for the oxygen reduction reaction is of great significance for clean and renewable energy technologies, such as metal-air batteries and fuel cells. Defect engineering is the central focus of this field because the overall catalytic performance crucially depends on highly active defects. For the ORR, topological defects have been proven to have a positive effect. However, because preparation and characterization of such defects are difficult, a basic understanding of the relationship between topological defects and catalytic performance remains elusive. In this study, topological defect-containing Fe/N co-doped mesoporous carbon nanosheets were synthesized using azulene-based sandwich-like polymer nanosheets as the precursor. As electrocatalysts, such porous carbon nanosheets exhibited promising ORR activity, methanol tolerance ability, and stability with a half-wave potential of 841 mV under alkaline conditions, which is superior to those of most of the reported porous carbons. As the air cathode for Zn-air batteries, the catalyst exhibited a peak power density of 153 mW cm^-2 and a specific capacity of 628 mA h g^-1,which were higher than those of a Pt/C-based Zn-air battery. Density functional theory calculation further proved the positive effect of topological defects on the oxygen reduction activity. These results indicate that bottom-up topological defect engineering could be a new and promising strategy for developing high-performance electrocatalysts.

Noble-Metal-Free Multicomponent Nanointegration for Sustainable Energy Conversion

Global energy and environmental crises are among the most pressing challenges facing humankind. To overcome these challenges, recent years have seen an upsurge of interest in the development and production of renewable chemical fuels as alternatives to the nonrenewable and high-polluting fossil fuels. Photocatalysis, photoelectrocatalysis, and electrocatalysis provide promising avenues for sustainable energy conversion. Single- and dual-component catalytic systems based on nanomaterials have been intensively studied for decades, but their intrinsic weaknesses hamper their practical applications. Multicomponent nanomaterial-based systems, consisting of three or more components with at least one component in the nanoscale, have recently emerged. The multiple components are integrated together to create synergistic effects and hence overcome the limitation for outperformance. Such higher-efficiency systems based on nanomaterials will potentially bring an additional benefit in balance-of-system costs if they exclude the use of noble metals, considering the expense and sustainability. It is therefore timely to review the research in this field, providing guidance in the development of noble-metal-free multicomponent nanointegration for sustainable energy conversion. In this work, we first recall the fundamentals of catalysis by nanomaterials, multicomponent nanointegration, and reactor configuration for water splitting, CO₂ reduction, and N₂ reduction. We then systematically review and discuss recent advances in multicomponent-based photocatalytic, photoelectrochemical, and electrochemical systems based on nanomaterials. On the basis of these systems, we further laterally evaluate different multicomponent integration strategies and highlight their impacts on catalytic activity, performance stability, and product selectivity. Finally, we provide conclusions and future prospects for multicomponent nanointegration. This work offers comprehensive insights into the development of cost-competitive multicomponent nanomaterial-based systems for sustainable energy-conversion technologies and assists researchers working toward addressing the global challenges in energy and the environment.

Hierarchically porous Fe,N-doped carbon nanorods derived from 1D Fe-doped MOFs as highly efficient oxygen reduction electrocatalysts in both alkaline and acidic media

Rationally designing low-cost yet highly efficient electrocatalysts for the oxygen reduction reaction (ORR) in both alkaline and acidic media remains highly challenging. Herein, we report the facile synthesis of Fe,N-doped carbon nanorods (denoted as Fe-N/C-NR) with abundant hierarchical pores and highly active sites by the pyrolysis of a one-dimensional (1D) Fe-doped zeolitic imidazolate framework (Fe-ZIF-8) as a self-sacrificing template. The unique 1D nanoarchitecture of the resultant Fe-N/C-NR can provide fast electron and electrolyte transport towards exposed active sites, and their hierarchically porous structures with large surface areas can efficiently facilitate mass diffusion and increase the density of exposed active sites. Furthermore, it is demonstrated that the coexistence of highly dispersed Fe-Nx sites and Fe3C/Fe nanoparticles (NPs) in these electrocatalysts can provide a large number of desired catalytic centers with highly intrinsic activity and structural stability. As a result, the optimized 5Fe-N/C-NR exhibits excellent catalytic activity for the ORR, with a high half-wave potential (E1/2) of 0.90 V vs. RHE in alkaline medium, superior to that of commercial Pt/C (0.86 V vs. RHE), and also a high E1/2 of 0.81 V vs. RHE in acidic medium, comparable to that of commercial Pt/C (0.81 V vs. RHE). Moreover, its robust ORR durability can far surpass that of commercial Pt/C in both acidic and alkaline media, further highlighting the merit of this MOF-templated strategy. Our findings might shed light on the rational design of cost-effective and highly efficient ORR electrocatalysts for practical applications.

Metal-Organic Frameworks and Metal-Organic Gels for Oxygen Electrocatalysis: Structural and Compositional Considerations

Increasing demand for sustainable and clean energy is calling for the next-generation energy conversion and storage technologies such as fuel cells, water electrolyzers, CO₂ /N₂ reduction electrolyzers, metal-air batteries, etc. All these electrochemical processes involve oxygen electrocatalysis. Boosting the intrinsic activity and the active-site density through rational design of metal-organic frameworks (MOFs) and metal-organic gels (MOGs) as precursors represents a new approach toward improving oxygen electrocatalysis efficiency. MOFs/MOGs afford a broad selection of combinations between metal nodes and organic linkers and are known to produce electrocatalysts with high surface areas, variable porosity, and excellent activity after pyrolysis. Some recent studies on MOFs/MOGs for oxygen electrocatalysis and their new perspectives in synthesis, characterization, and performance are discussed. New insights on the structural and compositional design in MOF/MOG-derived oxygen electrocatalysts are summarized. Critical challenges and future research directions are also outlined.

MOFs-Derived Carbon-Based Metal Catalysts for Energy-Related Electrocatalysis

Electrochemical devices, as renewable and clean energy systems, display a great potential to meet the sustainable development in the future. However, well-designed and highly efficient electrocatalysts are the technological dilemmas that retard their practical applications. Metal-organic frameworks (MOFs) derived electrocatalysts exhibit tunable structure and intriguing activity and have received intensive investigation in recent years. In this review, the recent progress of MOFs-derived carbon-based single atoms (SAs) and metal nanoparticles (NPs) catalysts for energy-related electrocatalysis is summarized. The effects of synthesis strategy, coordination environment, morphology, and composition on the catalytic activity are highlighted. Furthermore, these SAs and metal NPs catalysts for the applications of electrocatalysis (hydrogen evolution reaction, oxygen evolution reaction, oxygen reduction reaction, carbon dioxide reduction reaction, and nitrogen reduction reaction) are overviewed. Finally, some current challenges and foresighted ideas for MOFs-derived carbon-based metal electrocatalysts are presented.

Controlled assembly of nitrogen-doped iron carbide nanoparticles on reduced graphene oxide for electrochemical reduction of carbon dioxide to syngas

The electrocatalytic CO₂ reduction reaction (CO₂RR) decreases the amount of greenhouse gas in the atmosphere while enabling a closed carbon cycle. Herein, iron oleate was used as a precursor to produce oleic acid-coated triiron tetraoxide nanoparticles (Fe₃O₄@OA NPs) by pyrolysis, which was then assembled with reduced graphene oxide (rGO) and doped with dicyandiamide as a nitrogen source to obtain nitrogen-doped iron carbide nanoparticles assembled on rGO (N-Fe₃C/rGO NPs). The catalyst prepared by nitrogen doping at 800 °C with an Fe₃O₄@OA NPs to rGO weight ratio of 20:1 showed good activity and stability for the CO₂RR. At -0.3 to -0.4 V, the H₂/CO ratio of the product from the catalyzed CO₂RR was close to 2; thus, the product can be used for Fischer-Tropsch synthesis. The results of a series of experiments and X-ray photoelectron spectroscopy analysis showed that the synergy between the CN and FeN groups in the catalyst can promote the reduction of CO₂ to CO. This work demonstrates a facile method for improving the catalytic reduction of CO₂.

Novel Mn-/Co-Nx Moieties Captured in N-Doped Carbon Nanotubes for Enhanced Oxygen Reduction Activity and Stability in Acidic and Alkaline Media

Fe-N-C-based electrocatalysts have been developed as an encouraging substitute compared to their expensive Pt-containing equivalents for the oxygen reduction reaction (ORR). However, they still face major durability challenges from the in- situ production of Fenton radicals. Therefore, the synthesis of Fe-free ORR catalysts is among the emerging concerns. Herein, we have precisely applied a multistep heating strategy to produce mesoporous N-doped carbon nanostructures with Mn-/Co-N_x dual moieties from mixed-metal zeolitic imidazolate frameworks (ZIFs). It is found that their unique structure, with dual-metallic active sites, not only offers a high electrochemical performance for the ORR (E_1/2 = 0.83 V vs reversible hydrogen electrode (RHE) in acid media), but also enhances the operational durability of the catalyst after 20 000 cycles with 97% of retention and very low H₂O₂ production (<5%) in 0.1 M HClO₄. In addition, the catalyst performs well toward the ORR also in alkaline solution (exhibiting E_1/2 = 0.90 V and 30 000 cyclic stability).

Binder-Free Air Electrodes for Rechargeable Zinc-Air Batteries: Recent Progress and Future Perspectives

Designing an efficient air electrode is of great significance for the performance of rechargeable zinc (Zn)-air batteries. However, the most widely used approach to fabricate an air electrode involves polymeric binders, which may increase the interface resistance and block electrocatalytic active sites, thus deteriorating the performance of the battery. Therefore, binder-free air electrodes have attracted more and more research interests in recent years. This article provides a comprehensive overview of the latest advancements in designing and fabricating binder-free air electrodes for electrically rechargeable Zn-air batteries. Beginning with the fundamentals of Zn-air batteries and recently reported bifunctional active catalysts, self-supported air electrodes for liquid-state and flexible solid-state Zn-air batteries are then discussed in detail. Finally, the conclusion and the challenges faced for binder-free air electrodes in Zn-air batteries are also highlighted.

Metallo-deuteroporphyrins derived multi-layered hollow carbon spheres electrocatalysts for highly efficient oxygen reduction reaction

The development of low-cost, highly efficient and stable non-precious metal electrocatalyst for the oxygen reduction reaction (ORR) substituting Pt has attracted much attention. Herein, we developed a promising structural platform for the fabrication of carbon nanospheres functionalized with hollow nanostructures of M-NHCS (M = Fe, Co and Mn) based on metallo-deuteroporphyrins (MDP). Benefited from the multi-layered active sites and hollow substrate with more exposed active surface area, convenient channels for the transport of electrons, the resulting Fe-NHCS electrocatalysts exhibit enhanced electrocatalytic performance in ORR with an onset potential of 0.90 V (versus RHE), and a high selectivity in the direct 4-electron pathway. The Fe-NHCS electrocatalysts also show a good methanol tolerance superior to Pt/C catalysts and an extremely high stability with only 13.0 mV negative after 5000 cycles in alkaline media. Experiments have verified that maintaining the multi-layered Fe-N-C active sites and hollow substrate were essential to deliver the high performance for ORR. The work opens new avenues for utilizing MDP-based materials in future energy conversion applications.

Salt melt synthesis of Chlorella-derived nitrogen-doped porous carbon with atomically dispersed CoN4 sites for efficient oxygen reduction reaction

Carbon-supported single-atom catalysts (C-SACs) demonstrate great potential in various key electrochemical reactions. Nevertheless, the development of facile and economical strategies is highly appealing yet challenging given that the commonly used pyrolysis method has strict requirements on the structure and composition of precursors. Here, we demonstrate for the first time a facile and low-cost pyrolysis strategy assisted by molten salts at high temperature for preparing porous C-SACs with well-dispersed Co-N₄ sites directly from a Chlorella precursor. Based on the X-ray absorption fine structure results and aberration-corrected scanning transmission electron microscopy images, we show that single atom Co-N₄ moieties are anchored on a carbon matrix. A porous structure with a large specific surface area (2907 m² g^-1) and atomically dispersed active sites of Co provide the as-prepared Co-N/C-SAC with excellent electrocatalytic activity and stability for the ORR. The electrochemical measurements show that the half-wave potential and limited current density of this material are 0.83 V vs. RHE and 5.5 mA cm^-2, respectively, which are comparable to those of commercial Pt/C.

Oxygen Coordination on Fe-N-C to Boost Oxygen Reduction Catalysis

The coordination environments of iron (Fe) in Fe-N-C catalysts determine their intrinsic activities toward oxygen reduction reactions (ORR). The precise atomic-level regulation of the local coordination environments is thus of critical importance yet quite challenging to achieve. Here, atomically dispersed Fe-N-C catalyst with O-Fe-N₂C₂ moieties is thoroughly studied for ORR catalysis. Advanced synchrotron X-ray characterizations, along with theoretical modeling, explicitly unraveled the penta-coordinated nature of the Fe center in the catalytic domain and the energetically optimized ORR pathways on the well-tailored O-Fe-N₂C₂ moieties. The combined structure identification from both experiments and theory provides an opportunity to understand the role of the coordination environments in directing the catalytic activity of single-atom or single-site catalysts; not only the center metal atom but also the whole coordinating atoms participate in the catalytic cycle.

Hollow Carbon-Based Nanoarchitectures Based on ZIF: Inward/Outward Contraction Mechanism and Beyond

Hollow carbon-based nanoarchitectures (HCAs) derived from zeolitic imidazolate frameworks (ZIFs), by virtue of their controllable morphology and dimension, high specific surface area and nitrogen content, richness of metal/metal compounds active sites, and hierarchical pore structure and easy exposure of active sites, have attracted great interests in many fields of applications, especially in heterogeneous catalysis, and electrochemical energy storage and conversion. Despite various approaches that have been developed to prepare ZIF-derived HCAs, the hollowing mechanism has not been clearly disclosed. Herein, a specialized overview of the recent progress of ZIF-derived HCAs is introduced to provide an insight into their preparation strategy and the corresponding hollowing mechanisms. Based on the fundamental understanding of the structural evolution of ZIF nanocrystals during the high-temperature pyrolysis process, the hollowing mechanisms of ZIF-derived HCAs are classified into four categories: i) inward contraction of core-shell template@ZIF composites or hollow ZIFs, ii) outward contraction of ZIF@shell composites, iii) special outward contraction of ZIF arrays, and iv) mechanism beyond inward/outward contraction of pure ZIF nanocrystals. Finally, an outlook on the development prospects and challenges of HCAs based on ZIF precursors, especially in terms of controlled synthesis and future electrochemical application, is further discussed.

Thermodynamically driven self-formation of Ag nanoparticles in Zn-embedded carbon nanofibers for efficient electrochemical CO2 reduction

The electrochemical CO₂ reduction reaction (CO₂RR), which converts CO₂ into value-added feedstocks and renewable fuels, has been increasingly studied as a next-generation energy and environmental solution. Here, we report that single-atom metal sites distributed around active materials can enhance the CO₂RR performance by controlling the Lewis acidity-based local CO₂ concentration. By utilizing the oxidation Gibbs free energy difference between silver (Ag), zinc (Zn), and carbon (C), we can produce Ag nanoparticle-embedded carbon nanofibers (CNFs) where Zn is atomically dispersed by a one-pot, self-forming thermal calcination process. The CO₂RR performance of AgZn–CNF was investigated by a flow cell with a gas diffusion electrode (GDE). Compared to Ag–CNFs without Zn species (53% at −0.85 V vs. RHE), the faradaic efficiency (FE) of carbon monoxide (CO) was approximately 20% higher in AgZn–CNF (75% at −0.82 V vs. RHE) with 1 M KOH electrolyte.

Ag nanoparticles in Zn-embedded carbon nanofiber were synthesized by a simple one-pot, self-forming strategy. Charged Zn single atoms act as Lewis acidic sites and improving the CO₂ reduction reaction performance of the Ag nanoparticles.

Separation of Metal-N4 Units in Metal-Organic Framework for Preparation of M-Nx/C Catalyst with Dense Metal Sites

Metal and nitrogen codoped carbon (M-N_x/C) materials with good metal dispersion in a carbon matrix have attracted great attention because they can efficiently catalyze various kinds of chemical/electrochemical reactions. However, the existing strategies for preparing M-N_x/C materials still face the challenge of metal site aggregation when the carbon skeleton in the precursor is substantially lost during pyrolysis. Herein, we propose a general strategy that the increase of metal site density and inhibition of metal aggregation could be realized by separating M-N₄ units in metal-organic frameworks (MOFs). The metal sites can be well separated and distributed in carbon materials during the pyrolysis of a metal-coordinated block copolymer, one of the specific MOFs. The strategy can be widely applicable for the synthesis of M-N_x/C materials with dense metal sites, such as Fe-, Mn-, Ni-, and Co-N_x/C materials, which are potentially used as the efficient catalysts for various kinds of reactions. Taking Fe-N_x/C as a model oxygen reduction reaction (ORR) electrocatalyst, it shows the ORR half-wave potentials of 0.90 and 0.81 V vs RHE in alkaline and acidic electrolytes, respectively.