Low-Saturation-Intensity, High-Photostability, and High-Resolution STED Nanoscopy Assisted by CsPbBr3 Quantum Dots

Advancing biosensing through super-resolution fluorescence microscopy

Advancement of super-resolution fluorescence microscopy (SRM) has recently allowed applications to the biosensing by offering significant advantages over conventional methods. Its nanoscale spatial resolution and single-molecule sensitivity allow visualization and quantification of biomolecular targets without the need of signal amplification steps typically required in traditional biosensing methods. Moreover, recent innovations in probe design and imaging protocols have expanded SRM capabilities to enable dynamic biosensing in living cells, revealing molecular processes in their native cellular contexts. In this review, we discuss these applications of various SRM techniques to biosensing by highlighting their unique capabilities in providing spatial distribution information and high molecular sensitivity. We address several challenges that must be overcome for the broader application of SRM-based biosensing. Finally, we discuss perspectives on future directions for advancing this field towards practical applications.

Imaging Locally Inhomogeneous Properties of Metal Halide Perovskites

Metal halide perovskites (MHPs) are a perfect example of state-of-the-art photovoltaic materials whose compositional and structural diversity, coupled with utilization of low-temperature processing, can undesirably result in spatially inhomogeneous properties that locally vary within the material. This complexity of MHPs requires sensitive imaging characterization methods at the microscopic level to gauge the impact of such inhomogeneities on device performance and to formulate mitigation strategies. This review consolidates properties of MHPs that are susceptible to local variations and highlights appropriate imaging techniques that can be employed to map them. Inhomogeneities in morphology, emission, electrical response, and chemical composition of MHP thin films are specifically considered, and possible microscopic techniques for their visualization are reviewed. For each type of microscopy, a short discussion about spatial resolution, sample requirements, advantages, and limitations is provided, thus leaving the reader with a guide of available imaging characterization tools to evaluate inhomogeneities of their MHPs.

Correlative Super-resolution Optical and Electron Microscopic Imaging of Intracellular Ribosomal RNA by a Terpyridine Iridium(III) Complex

Ribosomal RNA (rRNA) plays a vital role in binding amino acids together, which dictates the primary structure of a protein. Visualization of its intracellular distribution and dynamics during protein synthesis enables a better understanding of the correlated biological essence. However, appropriate tools targeting live cell rRNA that are capable of multimodal imaging at the nanoscale are still lacking. Here, we rationally designed a series of terpyridine ammonium iridium(III) complexes, one of which is capable of selectively labeling rRNA in living cells. Its metal core and photostable nature allow further super-resolution STED imaging of rRNA found on the rough endoplasmic reticulum at a ∼40 nm resolution that is well correlated under correlative light and electron microscopy (CLEM). Interestingly, the Ir(III) complex demonstrated rRNA dynamics in living cells while boosting protein synthesis at the nanoscale. Our work offers a versatile tool to visualize rRNA synchronously under optical and electron microscopy, which provides a better understanding of rRNA evolution in living systems.

Recent Advances in Fluorescent Nanoparticles for Stimulated Emission Depletion Imaging

Stimulated emission depletion (STED) microscopy, as a popular super-resolution imaging technique, has been widely used in bio-structure analysis and resolving the dynamics of biological processes beyond the diffraction limit. The performance of STED critically depends on the optical properties of the fluorescent probes. Ideally, the probe should process high brightness and good photostability, and exhibit a sensitive response to the depletion beam. Organic dyes and fluorescent proteins, as the most widely used STED probes, suffer from low brightness and exhibit rapid photobleaching under a high excitation power. Recently, luminescent nanoparticles (NPs) have emerged as promising fluorescent probes in biological imaging due to their high brightness and good photostability. STED imaging using various kinds of NPs, including quantum dots, polymer dots, carbon dots, aggregation-induced emission dots, etc., has been demonstrated. This review will comprehensively review recent advances in fluorescent NP-based STED probes, discuss their advantages and pitfalls, and outline the directions for future development.

Exploiting the Photo-Physical Properties of Metal Halide Perovskite Nanocrystals for Bioimaging

Perovskite nanomaterials have recently been exploited for bioimaging applications due to their unique photo-physical properties, including high absorbance, good photostability, narrow emissions, and nonlinear optical properties. These attributes outperform conventional fluorescent materials such as organic dyes and metal chalcogenide quantum dots and endow them with the potential to reshape a wide array of bioimaging modalities. Yet, their full potential necessitates a deep grasp of their structure-attribute relationship and strategies for enhancing water stability through surface engineering for meeting the stringent and unique requirements of each individual imaging modality. This review delves into this evolving frontier, highlighting how their distinctive photo-physical properties can be leveraged and optimized for various bioimaging modalities, including visible light imaging, near-infrared imaging, and super-resolution imaging.

Automated fabrication of a scalable heart-on-a-chip device by 3D printing of thermoplastic elastomer nanocomposite and hot embossing

The successful translation of organ-on-a-chip devices requires the development of an automated workflow for device fabrication, which is challenged by the need for precise deposition of multiple classes of materials in micro-meter scaled configurations. Many current heart-on-a-chip devices are produced manually, requiring the expertise and dexterity of skilled operators. Here, we devised an automated and scalable fabrication method to engineer a Biowire II multiwell platform to generate human iPSC-derived cardiac tissues. This high-throughput heart-on-a-chip platform incorporated fluorescent nanocomposite microwires as force sensors, produced from quantum dots and thermoplastic elastomer, and 3D printed on top of a polystyrene tissue culture base patterned by hot embossing. An array of built-in carbon electrodes was embedded in a single step into the base, flanking the microwells on both sides. The facile and rapid 3D printing approach efficiently and seamlessly scaled up the Biowire II system from an 8-well chip to a 24-well and a 96-well format, resulting in an increase of platform fabrication efficiency by 17,5000-69,000% per well. The device's compatibility with long-term electrical stimulation in each well facilitated the targeted generation of mature human iPSC-derived cardiac tissues, evident through a positive force-frequency relationship, post-rest potentiation, and well-aligned sarcomeric apparatus. This system's ease of use and its capacity to gauge drug responses in matured cardiac tissue make it a powerful and reliable platform for rapid preclinical drug screening and development.

Type-I CdSe@CdS@ZnS Heterostructured Nanocrystals with Long Fluorescence Lifetime

Conventional single-component quantum dots (QDs) suffer from low recombination rates of photogenerated electrons and holes, which hinders their ability to meet the requirements for LED and laser applications. Therefore, it is urgent to design multicomponent heterojunction nanocrystals with these properties. Herein, we used CdSe quantum dot nanocrystals as a typical model, which were synthesized by means of a colloidal chemistry method at high temperatures. Then, CdS with a wide band gap was used to encapsulate the CdSe QDs, forming a CdSe@CdS core@shell heterojunction. Finally, the CdSe@CdS core@shell was modified through the growth of the ZnS shell to obtain CdSe@CdS@ZnS heterojunction nanocrystal hybrids. The morphologies, phases, structures and performance characteristics of CdSe@CdS@ZnS were evaluated using various analytical techniques, including transmission electron microscopy, X-ray diffraction, UV-vis absorption spectroscopy, fluorescence spectroscopy and time-resolved transient photoluminescence spectroscopy. The results show that the energy band structure is transformed from type II to type I after the ZnS growth. The photoluminescence lifetime increases from 41.4 ns to 88.8 ns and the photoluminescence quantum efficiency reaches 17.05% compared with that of pristine CdSe QDs. This paper provides a fundamental study and a new route for studying light-emitting devices and biological imaging based on multicomponent QDs.

Biomolecules incorporated in halide perovskite nanocrystals: synthesis, optical properties, and applications

Halide perovskite nanocrystals (HPNCs) have emerged at the forefront of nanomaterials research over the past two decades. The physicochemical and optoelectronic properties of these inorganic semiconductor nanoparticles can be modulated through the introduction of various ligands. The use of biomolecules as ligands has been demonstrated to improve the stability, luminescence, conductivity and biocompatibility of HPNCs. The rapid advancement of this field relies on a strong understanding of how the structure and properties of biomolecules influences their interactions with HPNCs, as well as their potential to extend applications of HPNCs towards biological applications. This review addresses the role of several classes of biomolecules (amino acids, proteins, carbohydrates, nucleotides, etc.) that have shown promise for improving the performance of HPNCs and their potential applications. Specifically, we have reviewed the recent advances on incorporating biomolecules with HP nanomaterials on the formation, physicochemical properties, and stability of HP compounds. We have also shed light on the potential for using HPs in biological and environmental applications by compiling some recent of proof-of-concept demonstrations. Overall, this review aims to guide the field towards incorporating biomolecules into the next-generation of high-performance HPNCs for biological and environmental applications.

Theoretical insight on the saturated stimulated emission intensity of a squaraine dye for STED nanoscopy

Stimulated emission depletion nanoscopy (STED) is increasingly applied for the insights into the ultra-structures of organelles in live cells because of the bypassing of the Abbe's optical diffraction limit. Theoretically, with the increase of excitation and depletion laser power, the imaging resolution can be accordingly enhanced and even close to the infinity. Unfortunately, powerful laser illuminations usually produce severe phototoxicity and photobleaching, which will lead to more extra-interference with biological events in live cells and accelerate the decomposition of the fluorescent probes. In view of the trade-off of cell viability and imaging resolution, excellent probes with superior photophysical properties are great in demand. For a qualified STED probes, the saturated stimulated emission intensity (I_sat) is considered as a key evaluating factor. According to the formula, I_sat is inversely proportional to the stimulated emission cross section (σ_sti) of the fluorescent probe. However, the relationship between the σ_sti and chemical structure of the STED probe remain to be unclear. In this work, we explore the influence factors by theoretical calculations on a squaraine dye (MitoEsq-635) and a commercial dye (Atto647N). The results indicate that the increase of transition dipole moment (μ) are beneficial for the increase of σ_sti, thereafter reducing I_sat. Furthermore, we firstly proposed that stimulated emission depletion was qualitatively interpreted by the investigation on the potential energy surfaces of ground states (S₀) and the first excited states (S₁) of the dyes.

Synergistically active piezoelectrical H2O2 production composite film achieved from catalytically inert PVDF-HFP matrix and SiO2 fillers

Local and decentralized H 2 O 2 production via piezoelectrical process promise smart biological utilization as well as environmental benefits. However, stable, bio/environmental- safe, and easily applied H 2 O 2 generation materials are still lacking. Here we report a novel flexible H 2 O 2 generation polymeric film composed of catalytically inert PVDF-HFP (Poly(vinylidene fluoride-co-hexafluoropropylene)) matrix and SiO 2 nanoparticle fillers. The film is bio-/environmentally benign at resting states, but effectively produces H 2 O 2 upon ultrasonic motivation at a production rate of 492 μmol [[EQUATION]] in one hour. Experimental and simulation methods in combination indicate that the effective H 2 O 2 generation capabilities stem from the synergistic existence of piezoelectrical fields and the air-liquid-solid three-phase regions around the porous film. The chemical conversions are motivated by the adsorbed charges. The silicon hydroxyl groups properly stabilize the *OOH intermediate and facilitate the chemical conversions of 2e - ORR of ambient O 2 . We expect the report to inspire H 2 O 2 piezoelectrical generation materials and promote the novel production strategies of H 2 O 2 as well as piezoelectrical functional materials.

Water-dispersed CsPbBr3 nanocrystals for single molecule localization microscopy with high location accuracy for targeted bioimaging

Single-molecule localization microscopy (SMLM) is one of the most promising super-resolution imaging techniques for visualizing ultrasmall cellular structures. Here, water-dispersed perovskite CsPbBr₃ nanocrystals (CsPbBr₃ NCs) fabricated by a one-step mechanochemical method are explored as a SMLM fluorophore for bioimaging. Due to their ultrahigh photoluminescence quantum yield (PLQY), inherent frequent fluorescence blinking, proper duty cycle and long-term photostability, an extremely high location precision of ∼3 nm was achieved, a sixfold enhancement than those reported previously. In addition, the spatial resolution of a SMLM image depends on the size of CsPbBr₃ NCs, which is approximately 23 nm. Two closely spaced CsPbBr₃ NCs with a gap of 40 nm can be clearly distinguished in the SMLM image. More importantly, unlike most perovskite quantum dots (QDs), one-step mechanochemically prepared CsPbBr₃ NCs can retain their excellent fluorescence characteristics even after surface biofunctionalization, greatly reducing the current limitations of perovskite QDs on bioimaging. As an example, cell-derived exosomes (30-150 nm in diameter) labeled with CsPbBr₃ NCs were easily identified by SMLM. In addition, after being functionalized with biotin, targeted SMLM imaging of the nuclear lamina or cell membranes of cells was achieved with an enhanced resolution. This work may open up a promising avenue to expand the field of perovskite QD-based SMLM to bioimaging with a high location accuracy.

Aggregation-Induced Emission (AIE) in Super-resolution Imaging: Cationic AIE Luminogens (AIEgens) for Tunable Organelle-Specific Imaging and Dynamic Tracking in Nanometer Scale

Organelle-specific imaging and dynamic tracking in ultrahigh resolution is essential for understanding their functions in biological research, but this remains a challenge. Therefore, a facile strategy by utilizing anion-π⁺ interactions is proposed here to construct an aggregation-induced emission luminogen (AIEgen) of DTPAP-P, not only restricting the intramolecular motions but also blocking their strong π-π interactions. DTPAP-P exhibits a high photoluminescence quantum yield (PLQY) of 35.04% in solids, favorable photostability and biocompatibility, indicating its potential application in super-resolution imaging (SRI) via stimulated emission depletion (STED) nanoscopy. It is also observed that this cationic DTPAP-P can specifically target to mitochondria or nucleus dependent on the cell status, resulting in tunable organelle-specific imaging in nanometer scale. In live cells, mitochondria-specific imaging and their dynamic monitoring (fission and fusion) can be obtained in ultrahigh resolution with a full-width-at-half-maximum (fwhm) value of only 165 nm by STED nanoscopy. This is about one-sixth of the fwhm value in confocal microscopy (1028 nm). However, a migration process occurs for fixed cells from mitochondria to nucleus under light activation (405 nm), leading to nucleus-targeted super-resolution imaging (fwhm= 184 nm). These findings indicate that tunable organelle-specific imaging and dynamic tracking by a single AIEgen at a superior resolution can be achieved in our case here via STED nanoscopy, thus providing an efficient method to further understand organelle's functions and roles in biological research.

Wavelength Tunable Aqueous CsPbBr3-Based Nanoprobes with Ultrahigh Photostability for Targeted Super-Resolution Bioimaging

Single molecule localization microscopy (SMLM) is indispensable in the visualization of cellular microstructures. However, current SMLM imaging materials, from organic fluorophores to quantum dots, still lack the requirement of increasing need for multiple targets of interest due to their broad emission. Here, by one-step encapsulating hydrophilic cesium lead bromide perovskite nanocrystals (CsPbBr₃ NCs) into functionalized polyethylene glycol (PEG), a core-shell nanocomposite of CsPb(Cl_(1-x)/Br_x)₃@PEG (0 < x < 1) was presented as a wavelength-tunable fluorescent probe with the narrow full width at half-maximum (fwhm) as 11 nm. The layer of functionalized PEG endows CsPbBr₃ NCs with a broad spectral tunability from 521 to 431 nm, superior photostability for several years, and the ability to be further surface functionalized. The CsPb(Cl_(1-x)/Br_x)₃@PEG exhibits a sub-10 nm localization precision and 10-fold enhanced spatial resolution. Using exosomes with small sizes less than 150 nm as the imaging target, CsPb(Cl_(1-x)/Br_x)₃@PEG realized the distinction of two adjacent exosomes by SMLM. Moreover, after being modified with biotin, CsPb(Cl_(1-x)/Br_x)₃@PEG was universally used for SMLM imaging of cellular microstructures. The excellent photostability and narrow fwhm indicated that such a CsPbBr₃-based nanoprobe has great potential as a commercial dye for multitarget super-resolution bioimaging applications.

Surface-Engineered Gold Nanoclusters for Stimulated Emission Depletion and Correlated Light and Electron Microscopy Imaging

Stimulated emission depletion (STED) nanoscopy is an emerging super-resolution imaging platform for the study of the cellular structure. Developing suitable fluorescent probes of small size, good photostability, and easy functionalization is still in demand. Herein, we introduce a new type of surface-engineered gold nanoclusters (Au NCs) that are ultrasmall (1.7 nm) and ultrabright (QY = 60%) for STED bioimaging. A rigid shell formed by l-arginine (l-Arg) and 6-aza-2-thiothymine (ATT) on the Au NC surface enables not only its strong fluorescence in aqueous solution but also its easy chemical modification for specific biomolecule labeling. Au NCs show remarkable performance as STED nanoprobes, including high depletion efficiency, good photobleaching resistance, and low saturation intensity. Super-resolution imaging has been achieved with these Au NCs, and targeted nanoscopic imaging of cellular tubulin has been demonstrated. Moreover, the circular structure of lysosomes in live cells has been revealed. As a Au NC is also an ideal probe for electron microscopy, dual imaging of Aβ₄₂ aggregates with the single labeling probe of Au NCs has been realized in correlative light and electron microscopy (CLEM). This work reports, for the first time, the application of Au NCs as a novel probe in STED and CLEM imaging. With their excellent properties, Au NCs show promising potential for nanoscale bioimaging.

Cd-free InP/ZnSeS quantum dots for ultrahigh-resolution imaging of stimulated emission depletion

Stimulated emission depletion (STED) nanoscopy is a promising super-resolution imaging technique for microstructure imaging; however, the performance of super-resolution techniques critically depends on the properties of the fluorophores (photostable fluorophores) used. In this study, a suitable probe for improving the resolution of STED nanoscopy was investigated. Quantum dots (QDs) typically exhibit good photobleaching resistance characteristics. In comparison with CdSe@ZnS QDs and CsPbBr₃ QDs, Cd-free InP/ZnSeS QDs have a smaller size and exhibit an improved photobleaching resistance. Through imaging using InP/ZnSeS QDs, we achieved an ultrahigh resolution of 26.1 nm. Furthermore, we achieved a 31 nm resolution in cell experiments involving InP/ZnSeS QDs. These results indicate that Cd-free InP/ZnSeS QDs have significant potential for application in fluorescent probes for STED nanoscopy.

STED Nanoscopy Imaging of Cellular Lipid Droplets Employing a Superior Organic Fluorescent Probe

Lipid droplets (LDs) are spherical organelles that participate in numerous biological processes. In order to visualize LDs on the nanoscale, nanoscopy fluorescence imaging is considered as the most attractive technique but is substantially limited by the characteristics of fluorescent probes. Thus, the development of a superior fluorescent probe that is capable of nanoscopy fluorescence imaging has attracted enormous attention. Herein, a benzodithiophene-tetraoxide-based molecule Lipi-BDTO has been developed that can easily undergo the stimulated emission depletion (STED) process and displays high photostability. These two characteristics of fluorescent probes finely satisfy the requirements of STED nanoscopy imaging. Indeed, applying the probe for STED imaging achieves a high resolution of 65 nm, belonging to one of the leading results of LDs fluorescence imaging. Furthermore, the high photostability of this fluorescent probe enables it to monitor the dynamics of LDs by time-lapse STED imaging as well as to visualize the three-dimensional (3D) spatial distribution of LDs by 3D STED imaging. Notably, the resolution of the 3D STED image represents one of the best LDs fluorescence imaging results so far. Besides STED nanoscopy imaging, the superior utility of this fluorescent probe has been also demonstrated in two-color 3D confocal imaging and four-color confocal imaging.

Responsive Carbonized Polymer Dots for Optical Super-resolution and Fluorescence Lifetime Imaging of Nucleic Acids in Living Cells

The rapid development of advanced optical imaging methods including stimulated emission depletion (STED) and fluorescence lifetime imaging microscopy (FLIM) has provided powerful tools for real-time observation of submicrometer biotargets to achieve unprecedented spatial and temporal resolutions. However, the practical imaging qualities are often limited by the performance of fluorescent probes, leading to unsatisfactory results. In particular, long-term imaging of nucleic acids in living cells with STED and FLIM remained desirable yet challenging due to the lack of competent probes combining targeting specificity, biocompatibility, low power requirement, and photostability. In this work, we rationally designed and synthesized a nanosized carbonized polymer dot (CPD) material, CPDs-3, with highly efficient and photostable emission for the super-resolution and fluorescence lifetime imaging of nucleic acids in living cells. The as-fabricated nanoprobe showed responsive emission properties upon binding with nucleic acids, providing an excellent signal-to-noise ratio in both spatial and temporal dimensions. Moreover, the characteristic saturation intensity value of CPDs-3 was as low as 0.68 mW (0.23 MW/cm²), allowing the direct observation of chromatin structures with subdiffraction resolution (90 nm) at very low excitation (<1 μW) and depletion power (<5 mW). Owing to its low toxicity, high photonic efficiency, and outstanding photostability, CPDs-3 was capable of performing long-term imaging both with STED and FLIM setups, demonstrating great potential for the dynamic study of nucleic acid functionalities in the long run.

Application of Nanooptics in Photographic Imagery and Medical Imaging

Background. At present, with the continuous development of nanotechnology, great changes have taken place in people’s lives in medical treatment, production, daily leisure, and so on. Nanooptical technology is entirely based on nanotechnology that laser and visible light are limited to submicron structures (nanopores, nanoslits, and nanoneedles). Due to the great development potential of nanooptical technology in nanoscale sensors, TOF camera applications, THz imaging technology, and other imaging equipment materials and applications, people have been interested in it, recently. Scope and Approach. In this review, the importance of good practices for nanooptical technology used in equipment as both nanometer scale sensors and optical auxiliary equipment is described. Based on recent reports, this work discussed the development of nanooptical technology in daily photography and medical imaging from both the positive and the negative sides and compared the engineering techniques. Key Findings and Conclusions. As a kind of new optical technology, nanooptical technology can produce the plasmonic effect under the intense collision of atoms and electrons in nanostructures. It has significant effects in superresolution nanolithography, high-density data storage, near-field optics, and other fields. Although the current nanooptic technology is not extremely mature, the results obtained from current works are pointing out that nanooptical technology is the future of daily imaging and medical imaging, and it also will play a positive role in the improvement of people’s health and ecological environment quality. As a trend, nanooptical technology is developing in the direction of energy-saving, portability, high efficiency, and low pollution, and in the upsurge of environmental protection in the world, nanooptical technology will surely achieve amazing development in the field of daily photography and medical imaging. Under the huge market demand and innovation power, nanophotonics technology will cover all emerging technologies that share the same research field with it and take advantage of each technology (terahertz, cell and molecular microscopy, and nanoscale probes) to develop an unprecedented new century in nanoscience. The future trends of research contain finding new imaging equipment with nanostructure, designing nanooptical products, and improving engineering techniques.

Low-Power Two-Color Stimulated Emission Depletion Microscopy for Live Cell Imaging

Stimulated emission depletion (STED) microscopy is a typical laser-scanning super-resolution imaging technology, the emergence of which has opened a new research window for studying the dynamic processes of live biological samples on a nanometer scale. According to the characteristics of STED, a high depletion power is required to obtain a high resolution. However, a high laser power can induce severe phototoxicity and photobleaching, which limits the applications for live cell imaging, especially in two-color STED super-resolution imaging. Therefore, we developed a low-power two-color STED super-resolution microscope with a single supercontinuum white-light laser. Using this system, we achieved low-power two-color super-resolution imaging based on digital enhancement technology. Lateral resolutions of 109 and 78 nm were obtained for mitochondria and microtubules in live cells, respectively, with 0.8 mW depletion power. These results highlight the great potential of the novel digitally enhanced two-color STED microscopy for long-term dynamic imaging of live cells.

Biocompatible perovskite quantum dots with superior water resistance enable long-term monitoring of the H2S level in vivo

The application of perovskite quantum dots (PQDs) in biomedical fields such as bioimaging and biosensing has been limited owing to their instability in the physiological environment. Herein, PQDs are innovatively encapsulated into nano-micelles composed of a polyethylene glycol-polycaprolactone (PEG-PCL) block copolymer, which allows the preparation of biocompatible PQDs (bio-PQDs) with excellent water resistance. Due to the benefits of extraordinary water resistance and biocompatibility, these bio-PQDs are capable of real-time and long-term quantitatively monitoring the H₂S level in living cells as well as in zebrafish.

Shedding New Lights Into STED Microscopy: Emerging Nanoprobes for Imaging

First reported in 1994, stimulated emission depletion (STED) microscopy has long been regarded as a powerful tool for real-time superresolved bioimaging . However, high STED light power (101∼3 MW/cm2) is often required to achieve significant resolution improvement, which inevitably introduces phototoxicity and severe photobleaching, damaging the imaging quality, especially for long-term cases. Recently, the employment of nanoprobes (quantum dots, upconversion nanoparticles, carbon dots, polymer dots, AIE dots, etc.) in STED imaging has brought opportunities to overcoming such long-existing issues. These nanomaterials designed for STED imaging show not only lower STED power requirements but also more efficient photoluminescence (PL) and enhanced photostability than organic molecular probes. Herein, we review the recent progress in the development of nanoprobes for STED imaging, to highlight their potential in improving the long-term imaging quality of STED microscopy and broadening its application scope. We also discuss the pros and cons for specific classes of nanoprobes for STED bioimaging in detail to provide practical references for biological researchers seeking suitable imaging kits, promoting the development of relative research field.

Improving the image quality in STED nanoscopy using frequency spectrum modulation

Since stimulated emission depletion (STED) nanoscopy was invented in 1994, this technique has been widely used in the fields of biomedicine and materials science. According to the imaging principle of STED technology, increasing the power of the depletion laser within a certain threshold can improve the resolution. However, it will cause not only severe photo-damage to the samples and photo-bleaching to the fluorophores but also serious background noise, leading to the degeneration of the quality of STED images. Here we propose a new processing method based on frequency spectrum modulation to improve the quality of STED images, abbreviated as FM-STED. We have demonstrated the performance of FM-STED in improving the signal-to-noise ratio and the resolution using fluorescent beads and biological cells as samples.

Recent advances in luminescent materials for super-resolution imaging via stimulated emission depletion nanoscopy

Recent progress on STED fluorophores for super-resolution imaging and also their characteristics are outlined here, thus providing some guidelines to select proper probes and even develop new materials for super-resolution imaging via STED nanoscopy.

Dual-color STED super-resolution microscope using a single laser source

STED (stimulated emission depletion) microscopy is one of the most promising super-resolution fluorescence microscopies，due to its fast imaging and ultra-high resolution. In this paper, we present a dual-color STED microscope with a single laser source. Polarization beam splitters are used to separate the output from a supercontinuum laser source into four laser beams, including two excitation beams (488, 635 nm) and two depletion beams (592, 775 nm). These four laser beams are then used to build a low cost dual-color STED system to achieve a spatial resolution of 75 nm in cell samples.

Synthesis and optical applications of low dimensional metal-halide perovskites

Metal halide perovskites have received substantial attention in research communities due to their outstanding efficiency achievements in the field of photovoltaics, optoelectronics and electronics, exhibiting extraordinary optical, electrical and mechanical properties. The exceptional structural tunability enables perovskite material to possess low-dimensional form at the atomic level and extends their applications into optoelectronic and photonic fields. This review discusses the recent progress of synthetic routes and fundamental optoelectronic properties of low-dimensional metal halide perovskites. In addition, the focus is to highlight the potential applications of perovskites in various devices including solar cells, light-emitting diodes, lasers, waveguides and memory devices. Finally, outlooks and the challenges that face the development of the perovskite materials in the near future are also presented.

Deep-Red Fluorescent Organic Nanoparticles with High Brightness and Photostability for Super-Resolution in Vitro and in Vivo Imaging Using STED Nanoscopy

To achieve super-resolution imaging in biological research using stimulated emission depletion (STED) nanoscopy, organic luminescent materials and their corresponding fluorescent nanoparticles with high brightness and photostability are of great significance. Herein, donor-acceptor-typed DBTBT-4C8 bearing flexible alkyl chains was developed, not only to afford deep-red emission from 600 to 800 nm but also to obtain high fluorescent brightness with the absolute photoluminescence quantum yields of 25%. After that, well-defined and monodispersed spherical nanoparticles using DBTBT-4C8 with bright emission, excellent biocompatibility, and photostability, which can easily mix with amphipathic block polymers, were then produced for super-resolution in vitro and in vivo imaging using STED nanoscopy. The observations showed that in contrast to confocal microscopy with a full width at half-maximum (FWHM) value of ≈400 nm, superior resolution with a significantly improved FWHM value of only 100 nm was achieved in biomedical cell imaging, which was also used to reconstruct three-dimensional images of stained HeLa cells at an ultrahigh resolution. More importantly, by using the prepared fluorescent organic nanoparticles (FONPs) in STED nanoscopy, in vivo imaging in glass catfish with largely enhanced resolution was also successfully achieved, demonstrating that these developed deep-red FONPs here are highly suitable for super-resolution in vitro and in vivo imaging using STED nanoscopy.

In situ green synthesis of highly fluorescent Fe2 O3 @CQD/graphene oxide using hard pistachio shells via the hydrothermal-assisted ball milling method

In this study, highly photoluminescent and photocatalytic Fe₂ O₃ @carbon quantum dots/graphene oxide nanostructures were synthesized using ball milling-assisted hydrothermal synthesis with hard pistachio shells. Different analyses, such as X-ray diffraction, energy dispersive X-ray spectroscopy, and Fourier transform infrared spectroscopy were used to study the product structure. Scanning electron microscopy and transmission electron microscopy images were used to study product size and morphology. Optical properties of the as-synthesized nanomaterials were investigated using ultraviolet-visible light and photoluminescence analyses. To increase photoluminescence intensity, ethylene diamine tetraacetic acid, polyethylene glycol, polyvinylpyrrolidone, and acetylacetonate anions were used to modify the product surface. Thermal stability of the product was studied using thermal gravimetric analysis. Finally, photocatalytic activity and surface adsorption of the product were investigated; the produce was found to be highly photoluminescent with high photocatalytic and surface activities.

Super-Resolution Visualization of Self-Assembling Helical Fibers Using Aggregation-Induced Emission Luminogens in Stimulated Emission Depletion Nanoscopy

Organic fluorophores for stimulated emission depletion (STED) nanoscopy usually suffer from quenched emission in the aggregate state and inferior photostability, which largely limit their application in real-time, in situ, and long-term imaging at an ultrahigh resolution. Herein, an aggregation-induced emission (AIE) luminogen of DP-TBT with bright emission in solid state (photoluminescence quantum yields = 25%) and excellent photostability was designed to meet the requirements in STED nanoscopy. In addition to its excellent fluorescence properties, DP-TBT could also easily form self-assembling helixes and finally be well-visualized by super-resolution STED nanoscopy. The observations showed that helical fibers of DP-TBT as dashed lines had a much decreased fiber width with also a full width at half-maximum value of only 178 nm, which is ∼6 times higher than solid lines obtained by confocal microscopy (1154 nm). The STED nanoscopic data were also used to reconstruct 3D images of assembled helixes. Finally, by long-term tracking and dynamic monitoring, the formation and growth of helical fibers by DP-TBT in self-assembly processes were successfully obtained. These findings imply that highly emissive AIEgens with good photostability are highly suitable for real-time, in situ, and dynamic imaging at super-resolution using STED nanoscopy.

Nucleolus-Targeted Red Emissive Carbon Dots with Polarity-Sensitive and Excitation-Independent Fluorescence Emission: High-Resolution Cell Imaging and in Vivo Tracking

Red-emitting carbon dots (CDs) have attracted tremendous attention due to their wide applications in areas including imaging, sensing, drug delivery, and cancer therapy. However, it is still highly challenging for red-emitting CDs to simultaneously achieve high quantum yields (QYs), nucleus targeting, and super-resolution fluorescence imaging (especially the stimulated emission depletion (STED) imaging). Here, it is found that the addition of varied metal ions during the hydrothermal treatment of p-phenylenediamine (pPDA) leads to the formation of fluorescent CDs with emission wavelengths up to 700 nm. Strikingly, although metal ions play a crucial role in the synthesis of CDs with varied QYs, they are absent in the formed CDs, that is, the obtained CDs are metal-free, and the metal ions play a role similar to a "catalyst" during the CD formation. Besides, using pPDA and nickel ions (Ni²⁺) as raw materials, we prepare Ni-pPCDs which have the highest QY and exhibit various excellent fluorescence properties including excitation-independent emission (at ∼605 nm), good photostability, polarity sensitivity, and ribonucleic acid responsiveness. In vitro and in vivo experiments demonstrate that Ni-pPCDs are highly biocompatible and can realize real-time, wash-free, and high-resolution imaging of cell nuclei and high-contrast imaging of tumor-bearing mice and zebrafish. In summary, the present work may hold great promise in the synthesis and applications of red emissive CDs.

Organic nanoparticles with ultrahigh stimulated emission depletion efficiency for low-power STED nanoscopy

Stimulated emission depletion (STED) nanoscopy is a powerful sub-diffraction imaging tool to probe subcellular structures and organelles. Conventional organic dyes require high STED power (PSTED) to obtain sub-diffraction resolution, leading to serious photo-bleaching. Herein, this study demonstrates highly emissive silica-coated core-shell organic nanoparticles (CSONPs) as a new type of photostable probe with ultrahigh stimulated emission depletion efficiency for low-power super-resolution STED nanoscopy. The CSONPs offer (i) efficient red emission with high solid-state fluorescence quantum yields around 0.6, (ii) large Stokes shift of 150 nm and (iii) high photostability owing to silica shell protection. The stimulated emission depletion efficiency (η) of CSONPs was extremely high up to η = 99% (the highest value reported so far) with a saturation intensity as low as Isat = 0.18 MW cm-2. Moreover, this research demonstrates the super-resolution imaging of living HeLa cells stained using CSONPs with a lateral spatial resolution of 63 nm at an extremely low depletion power of ISTED = 0.89 MW cm-2 and a long-term stability >600 s at η = 80% without obvious fatigue. The excellent and comprehensive performances of the CSONPs are promising for super-resolution imaging in biological applications.

Optical Amplification in Hollow-Core Negative-Curvature Fibers Doped with Perovskite CsPbBr3 Nanocrystals

We report a hollow-core negative-curvature fiber (HC-NCF) optical signal amplifier fabricated by the filling of the air microchannels of the fiber with all-inorganic CsPbBr3 perovskite nanocrystals (PNCs). The optimum fabrication conditions were found to enhance the optical gain, up to +3 dB in the best device. Experimental results were approximately reproduced by a gain assisted mechanism based on the nonlinear optical properties of the PNCs, indicating that signal regeneration can be achieved under low pump powers, much below the threshold of stimulated emission. The results can pave the road of new functionalities of the HC-NCF with PNCs, such as optical amplification, nonlinear frequency conversion and gas sensors.

Increasing fluorescence lifetime for resolution improvement in stimulated emission depletion nanoscopy

Super-resolution microscopy (SRM) has had a substantial impact on the biological sciences due to its ability to observe tiny objects less than 200 nm in size. Stimulated emission depletion (STED) microscopy represents a major category of these SRM techniques that can achieve diffraction-unlimited resolution based on a purely optical modulation of fluorescence behaviors. Here, we investigated how the laser beams affect fluorescence lifetime in both confocal and STED imaging modes. The results showed that with increasing illumination time, the fluorescence lifetime in two kinds of fluorescent microspheres had an obvious change in STED imaging mode, compared with that in confocal imaging mode. As a result, the reduction of saturation intensity induced by the increase of fluorescence lifetime can improve the STED imaging resolution at the same depletion power. The phenomenon was also observed in Star635P-labeled human Nup153 in fixed HeLa cells, which can be treated as a reference for the synthesis of fluorescent labels with the sensitivity to the surrounding environment for resolution improvement in STED nanoscopy.