Synthetic Multifunctional Graphene Composites with Reshaping and Self-Healing Features via a Facile Biomineralization-Inspired Process

Highly salt-resistant and efficient dynamic Janus absorber based on thermo-responsive hydroxypropyl cellulose

Recent advances in interfacial solar steam generation have made direct solar desalination a promising approach for providing cost-effective and environmentally friendly clean water solutions. However, developing highly effective, salt-resistant solar absorbers for long-term desalination at high efficiencies and evaporation rates remains a significant challenge. We present a Janus hydrogel-based absorber featuring a surface modified with thermo-responsive hydroxypropyl cellulose (HPC) and a hydrogel matrix containing photothermal conversion units, MXene, specifically designed for long-term seawater desalination. At the lower critical solution temperature, HPC undergoes phase separation, which results in the formation of a rough hydrophobic surface. This process creates a Janus evaporator structure that exhibits a high evaporation rate, excellent salt resistance, and long-term stability. Consequently, the hydrogel absorbers achieve an impressive evaporation rate (3.11 kg m-2 h-1) under one-sun irradiation. Salt residues are deposited only at the edges of the super-hydrophilic bottom. This process ensures long-term evaporator stability for continuous solar evaporation (>30 hours) in simulated seawater at an average evaporation rate of ∼2.58 kg m-2 h-1. With its unique structural design, achieved via a straightforward design process, the flexible Janus absorber serves as an efficient, salt-resistant, and stable solar steam generator for direct solar desalination.

Microfluidization Preparation of Hybrid Graphene for Enhanced Wear Resistance of Coatings

Wear resistance is the key factor that affects the long-term use of leather. Graphene has excellent wear resistance properties, but ensuring the effective dispersion of graphene in resin is crucial for determining the performance of the material. In this work, silica modified with polydopamine (SiO2@PDA) was used as an exfoliation agent. Using the microfluidization process and water as the medium, silica-graphene hybrid nanoparticles (SiO2@PDA-G) were prepared from expanded graphite. These nanoparticles were further compounded with waterborne polyurethane (WPU), and a superfine fiber-based fabric was used as the substrate to prepare composite coating. The results showed that the high shear force of the microfluidization process easily broke up the lamellar structure of graphite, resulting in few-layer graphene. Nano-silica was adsorbed on the surface of graphene, preventing re-aggregation between the graphene sheets. Compared to the WPU coating, the presence of SiO2@PDA-G improved the wear resistance and mechanical properties of the coating. The wear rate and the average friction coefficient of the composite coating decreased by 48% and 69%, respectively, and the tensile strength increased by 83%. Therefore, this study provides a new strategy for improving the dispersion of graphene in polymer materials and enhancing the abrasion resistance of the coatings.

Highly Elastic, Robust, and Efficient Hydrogel Solar Absorber against Harsh Environmental Impacts

Solar distillation is a promising approach for addressing water scarcity, but relentless stress/strain perturbations induced by wind and waves would inevitably cause structural damage to solar absorbers. Despite notable advances in efficient solar absorbers, there have been no reports of compliant and robust solar absorbers withstanding practical mechanical impacts. Herein, an elastic and robust hydrogel absorber that exhibited a high level of evaporation performance was fabricated by introducing ion-coordinated MXene nanosheets as photothermal conversion units and mechanically enhanced fillers. The ion-coordinated MXene nanosheets acting as strong cross-linking points provided excellent elasticity and robustness to the hydrogel absorber. As a result, the evaporation rate of hydrogel absorber, with a high initial value of 2.61 kg m-2 h-1 under one sun irradiation, remained at 2.15 kg m-2 h-1 under a 100% tensile strain state and 2.40 kg m-2 h-1 after 10 000 stretching-releasing cycles. This continuous and stable water desalination approach provides a promising device for actual seawater distillation.

3D Printing of Self-Healing Materials

This review article presents a comprehensive overview of the latest advances in the field of 3D printable structures with self-healing properties. Three-dimensional printing (3DP) is a versatile technology that enables the rapid manufacturing of complex geometric structures with precision and functionality not previously attainable. However, the application of 3DP technology is still limited by the availability of materials with customizable properties specifically designed for additive manufacturing. The addition of self-healing properties within 3D printed objects is of high interest as it can improve the performance and lifespan of structural components, and even enable the mimicking of living tissues for biomedical applications, such as organs printing. The review will discuss and analyze the most relevant results reported in recent years in the development of self-healing polymeric materials that can be processed via 3D printing. After introducing the chemical and physical self-healing mechanism that can be exploited, the literature review here reported will focus in particular on printability and repairing performances. At last, actual perspective and possible development field will be critically discussed.

Bioinspired Multiscale Mineralization: From Fundamentals to Potential Applications

The wondrous and imaginative designs of nature have always been an inexhaustible treasure trove for material scientists. Throughout the long evolutionary process, biominerals with hierarchical structures possess some specific advantages such as outstanding mechanical properties, biological functions, and sensing performances, the formation of which (biomineralization) is delicately regulated by organic component. Provoked by the subtle structures and profound principles of nature, bioinspired functional minerals can be designed with the participation of organic molecules. Because of the designable morphology and functions, multiscale mineralization has attracted more and more attention in the areas of medicine, chemistry, biology, and material science. This review provides a summary of current advancements in this extending topic. The mechanisms underlying mineralization is first concisely elucidated. Next, several types of minerals are categorized according to their structural characteristic, as well as the different potential applications of these materials. At last, a comprehensive overview of future developments for bioinspired multiscale mineralization is given. Concentrating on the mechanism of fabrication and broad application prospects of multiscale mineralization, the hope is to provide inspirations for the design of other functional materials.

3D Printed Graphene-Based Metamaterials: Guesting Multi-Functionality in One Gain

Advanced functional materials with fascinating properties and extended structural design have greatly broadened their applications. Metamaterials, exhibiting unprecedented physical properties (mechanical, electromagnetic, acoustic, etc.), are considered frontiers of physics, material science, and engineering. With the emerging 3D printing technology, the manufacturing of metamaterials becomes much more convenient. Graphene, due to its superior properties such as large surface area, superior electrical/thermal conductivity, and outstanding mechanical properties, shows promising applications to add multi-functionality into existing metamaterials for various applications. In this review, the aim is to outline the latest developments and applications of 3D printed graphene-based metamaterials. The structure design of different types of metamaterials and the fabrication strategies for 3D printed graphene-based materials are first reviewed. Then the representative explorations of 3D printed graphene-based metamaterials and multi-functionality that can be introduced with such a combination are further discussed. Subsequently, challenges and opportunities are provided, seeking to point out future directions of 3D printed graphene-based metamaterials.

Precise Localization and Simultaneous Bacterial Eradication of Biofilms Based on Nanocontainers with Successive Responsive Property toward pH and ATP

The bacterial colonization of surfaces and subsequent biofilm formation are a great threat in medical therapy and clinical diagnosis. The complex internal structure and composition sets an enormous obstacle for the localization and removal of biofilms. In this study, we proposed a novel biofilm-targeted nanocontainer with successive responsive property toward pH and ATP for precise localization and simultaneous bacterial eradication, with an acidic and adenosine triphosphate (ATP)-rich microenvironment within biofilms, formed due to the accumulation of fatty acids and ATP in the three-dimensional enclosed structure, integrated as two successive indicators to improve the precision of biofilm identification and removal. The biofilm-targeted nanocontainer was composed of a ATP-responsive zeolitic imidazolate framework-90 (ZIF-90) core loaded with Rho 6G and doxorubicin hydrochloride (DOX) encapsulated in the pH-responsive amorphous calcium carbonate/poly(acrylic acid) (ACC/PAA) shell. In the presence of biofilms, the ACC/PAA shell and ZIF-90 core were successively degraded by the accumulated H⁺ and ATP within biofilms, resulting in the release of fluorescence indicators and antimicrobial agents. On the other hand, to meet the application requirements of different biofilm scenarios, the pH response ability of the nanocontainers could be adjusted by changing the metallic ions (Ni²⁺, Zn²⁺, and Cu²⁺) doped into the structure of the ACC/PAA shell. Owing to excellent water dispersion of the pH/ATP double-responsive ZIF-90@Zn-ACC/PAA nanocontainer, precise localization and simultaneous bacterial eradication was successfully realized via a simple spray process. The successive pH/ATP two-step unlocking processes endowed the nanocontainers high precision for localization and simultaneous eradication of biofilms, which made the proposed nanocontainers high promising in food safety and medical treatment.

Cartilage-Inspired Hydrogel with Mechanical Adaptability, Controllable Lubrication, and Inflammation Regulation Abilities

Cartilage is a key component in joints because of its load-bearing and lubricating abilities. However, osteoarthritis often leads to afunction of load-bearing/lubrication and occurrence of inflammation with overexpressed reactive oxygen species (ROS) and nitric oxide (NO). To address these issues, we fabricated a novel polyanionic hydrogel with abundant carboxylates/sulfonates ("CS" hydrogel), inspired by normal cartilage rich in anionic hyaluronate/sulfonate glycosaminoglycan/lubricin, and crosslinked it tightly by Fe3+ ("CS-Fe" hydrogel). The "CS-Fe" hydrogel displayed mechanical adaptability and shear resistance. A low coefficient of friction (∼0.02) appeared when a loose hydrogel layer was generated because of the photoreduction of Fe3+ to Fe2+ by UV irradiation. This biocompatible "CS-Fe" hydrogel suppressed the overexpressed hydroxyl radical (·OH) and NO in macrophages and protected chondrocytes/fibroblasts from aggressive inflammation. Moreover, the layered "CS-Fe" hydrogel avoided cell death of chondrocytes in sliding tests. The results demonstrate that this cartilage-inspired hydrogel is a promising candidate material in cartilage tissue engineering to especially address inflammation.

Microplastics impact shell and pearl biomineralization of the pearl oyster Pinctada fucata

Microplastics are extremely widespread aquatic pollutants that severely detriment marine life. In this study, the influence of microplastics on biomineralization was investigated. For the first time, multiple forms and types of microplastics were detected and isolated from the shells and pearls of Pinctada fucata. According to the present study, the abundance of microplastics in shells and pearls was estimated at 1.95 ± 1.43 items/g and 0.53 ± 0.37 items/g respectively. Interestingly, microplastics were less abundant in high-quality round pearls. Microplastics may hinder the growth of calcite and aragonite crystals, which are crucial components required for shell formation. During the process of biomineralization microplastics became embedded in shells, suggesting the existence of a novel pathway by which microplastics accumulate in bivalves. After a 96-h exposure to microplastics, the expression level of typical biomineralization-related genes increased, including amorphous calcium carbonate binding protein (ACCBP) gene which experienced a significant increase. ACCBP promotes the formation of amorphous calcium carbonate (ACC), which is the pivotal precursor of shell formation-related biominerals. ACCBP is highly expressed during the developmental stage of juvenile oysters and the shell-damage repair process. The increased expression of ACCBP suggests biomineralization is enhanced as a result of microplastics exposure. These results provide important evidence that microplastics exposure may impact the appearance of biominerals and the expression of biomineralization-related genes, posing a new potential threat to aquatic organisms.

Carbon-Based Materials for Articular Tissue Engineering: From Innovative Scaffolding Materials toward Engineered Living Carbon

Carbon materials constitute a growing family of high-performance materials immersed in ongoing scientific technological revolutions. Their biochemical properties are interesting for a wide set of healthcare applications and their biomechanical performance, which can be modulated to mimic most human tissues, make them remarkable candidates for tissue repair and regeneration, especially for articular problems and osteochondral defects involving diverse tissues with very different morphologies and properties. However, more systematic approaches to the engineering design of carbon-based cell niches and scaffolds are needed and relevant challenges should still be overcome through extensive and collaborative research. In consequence, this study presents a comprehensive description of carbon materials and an explanation of their benefits for regenerative medicine, focusing on their rising impact in the area of osteochondral and articular repair and regeneration. Once the state-of-the-art is illustrated, innovative design and fabrication strategies for artificially recreating the cellular microenvironment within complex articular structures are discussed. Together with these modern design and fabrication approaches, current challenges, and research trends for reaching patients and creating social and economic impacts are examined. In a closing perspective, the engineering of living carbon materials is also presented for the first time and the related fundamental breakthroughs ahead are clarified.

Calcium-Based Biomineralization: A Smart Approach for the Design of Novel Multifunctional Hybrid Materials

Biomineralization consists of a complex cascade of phenomena generating hybrid nano-structured materials based on organic (e.g., polymer) and inorganic (e.g., hydroxyapatite) components. Biomineralization is a biomimetic process useful to produce highly biomimetic and biocompatible materials resembling natural hard tissues such as bones and teeth. In detail, biomimetic materials, composed of hydroxyapatite nanoparticles (HA) nucleated on an organic matrix, show extremely versatile chemical compositions and physical properties, which can be controlled to address specific challenges. Indeed, different parameters, including (i) the partial substitution of mimetic doping ions within the HA lattice, (ii) the use of different organic matrices, and (iii) the choice of cross-linking processes, can be finely tuned. In the present review, we mainly focused on calcium biomineralization. Besides regenerative medicine, these multifunctional materials have been largely exploited for other applications including 3D printable materials and in vitro three-dimensional (3D) models for cancer studies and for drug testing. Additionally, biomineralized multifunctional nano-particles can be involved in applications ranging from nanomedicine as fully bioresorbable drug delivery systems to the development of innovative and eco-sustainable UV physical filters for skin protection from solar radiations.

Double-network cross-linked aerogel with rigid and super-elastic conversion: simple formation, unique properties, and strong sorption of organic contaminants

Novel adsorbents with high adsorption capacity, broad-spectrum adsorption performance, and good reusability are needed for the treatment of diverse and complex contaminants in water. In this work, we used in situ hydrothermal reaction to fabricate graphene oxide (GO) and poly(vinyl alcohol) (PVA) based aerogels (GP_XA, X represented the volume of PVA) through the cross-linking network that meets the above requirement. After adding Ca²⁺, GP₁₆A (with 16 mL PVA) had surprisingly rigid and super-elastic conversion that is dependent on water stimulus. The strong adsorption of methylene blue (MB) on GP₁₆A illustrated that it had excellent dye removal ability. The adsorption capacity of GP₁₆A to MB was 698.38 mg g^-1 and it remained 85.62% after repeated adsorption-desorption cycles. The adsorption was controlled by multiple mechanisms including electrostatic interaction, π-π interaction, and hydrogen bond. In addition, hydrophobically modified GP₁₆A (GP₁₆A-MTMS) effectively absorbed common oils and organic solvents. Repeated absorption of GP₁₆A-MTMS was re-activated by squeezing operation. This study provides an alternative technique for preparing aerogel materials with high recyclability, dimensional stability, and solvent resistance, and for dealing organic contaminants in water.

A shape-deformable liquid-metal-filled magnetorheological plastomer sensor with a magnetic field "on-off" switch

Flexible viscoelastic sensors have gained significant attention in wearable devices owing to their exceptional strain-dependent electrical resistance. Most of the strain sensors are elastic composites, thus the internal stress is often preserved during the deformation when they are attached to the uneven target. Therefore, there is a pressing need for viscoelastic composites with highly self-adapted electromechanical properties sensitive to multiexternal circumstances. This work reports a liquid-metal-filled magnetorheological plastomer (LMMRP) that shows a high response behavior to the external stimulus such as magnetic field, temperature, and force. The shape-deformable LMMRP can transform from an insulator to a conductor under applying a magnetic field, thus the further viscoelastic sensor possesses a magnetic field “on-off” switch effect. The microstructure-dependent magnetic/thermal/mechanical-electrical coupling characteristics are investigated, and several proof-of-concept sensor applications, such as magnetic control, environment recognition, and motion monitoring, are demonstrated. These LMMRP composites show a broad potential in flexible sensors and soft electronics.

•

A shape-deformable liquid-metal-filled magnetorheological plastomer was created.

•

The plastomer is sensitive to magnetic field, temperature, and force.

•

The evolution of the particle microstructure in the plastomer was simulated.

•

The plastomer has great potential in flexible electronics with magnetic control.

Multifunctional Ti3C2Tx MXene Composite Hydrogels with Strain Sensitivity toward Absorption-Dominated Electromagnetic-Interference Shielding

The fast development of terahertz technologies demands high-performance electromagnetic interference (EMI) shielding materials to create safe electromagnetic environments. Despite tremendous breakthroughs in achieving superb shielding efficiency (SE), conventional shielding materials have high reflectivity and cannot be re-edited or recycled once formed, resulting in detrimental secondary electromagnetic pollution and poor adaptability. Herein, a hydrogel-type shielding material incorporating MXene and poly(acrylic acid) is fabricated through a biomineralization-inspired assembly route. The composite hydrogel exhibits excellent stretchability and recyclability, favorable shape adaptability and adhesiveness, and fast self-healing capability, demonstrating great application flexibility and reliability. More interestingly, the shielding performance of the hydrogel shows absorption-dominated feature due to the combination of the porous structure, moderate conductivity, and internal water-rich environment. High EMI SE of 45.3 dB and broad effective absorption bandwidth (0.2-2.0 THz) with excellent refection loss of 23.2 dB can be simultaneously achieved in an extremely thin hydrogel (0.13 mm). Furthermore, such hydrogel demonstrates sensitive deformation responses and can be used as an on-skin sensor. This work provides not only an alternative strategy for designing next-generation EMI shielding material but also a highly efficient and convenient method for fabricating MXene composite on macroscopic scales.

Bioinspired 3D Printable, Self-Healable, and Stretchable Hydrogels with Multiple Conductivities for Skin-like Wearable Strain Sensors

Bioinspired hydrogels have promising prospects in applications such as wearable devices, human health monitoring equipment, and soft robots due to their multifunctional sensing properties resembling natural skin. However, the preparation of intelligent hydrogels that provide feedback on multiple electronic signals simultaneously, such as human skin receptors, when stimulated by external contact pressure remains a substantial challenge. In this study, we designed a bioinspired hydrogel with multiple conductive capabilities by incorporating carbon nanotubes into a chelate of calcium ions with polyacrylic acid and sodium alginate. The bioinspired hydrogel consolidates self-healing ability, stretchability, 3D printability, and multiple conductivities. It can be fabricated as an integrated strain sensor with simultaneous piezoresistive and piezocapacitive performances, exhibiting sensitive (gauge factor of 6.29 in resistance mode and 1.25 kPa^-1 in capacitance mode) responses to subtle pressure changes in the human body, such as finger flexion, knee flexion, and respiration. Furthermore, the bioinspired strain sensor sensitively and discriminatively recognizes the signatures written on it. Hence, we expect our ideas to provide inspiration for studies exploring the use of advanced hydrogels in multifunctional skin-like smart wearable devices.

Bio-inspired mineral fluorescent hydrogels cross-linked by amorphous rare earth carbonates

The bio-inspired mineral plastic hydrogel based on calcium carbonate and polyacrylic acid has been recently investigated as a promising sustainable material. Here we report that rare earth carbonates can act as cross-linkers to fabricate analogous hydrogels and provide remarkable optical properties.

Multi-triggered and enzyme-mimicking graphene oxide/polyvinyl alcohol/G-quartet supramolecular hydrogels

Supramolecular hydrogels with stimuli-responsive behaviors under aqueous environments are attractive for their potential applications in controlled drug delivery, clinical diagnostics, and tissue engineering. However, there still remain challenges in developing multicomponent hydrogels as a new generation of "smart" soft materials with multiple intelligent functions toward complex biochemical stimuli. In this work, a three dimensional (3D)-nanostructured supramolecular hydrogel was fabricated using a simple and facile strategy via the self-assembly of graphene oxide (GO) nanosheets, poly(vinyl alcohol) (PVA) chains, and G-quartet/hemin (G4/H) motifs. The as-prepared GO/PVA/G4/H hydrogel exhibited a honeycomb-like 3D GO network architecture as well as excellent mechanical properties. Importantly, the hydrogel demonstrated pH-inducing reversible and cyclic phase transitions between solution and hydrogel states, which could be used as "ink" for injectable 3D printing of different shaped patterns. Also, binary AND and OR logic gates were successfully built by encapsulating enzymes into the hydrogels, which responded to a variety of biochemicals. In addition, the hydrogels showed excellent peroxidase-like activity, achieving the ultrasensitive detection of H2O2 at a concentration as low as 100 nM by their deposition on an electrochemical electrode. The design of multicomponent hydrogels opens up an avenue to fabricate novel "smart" soft matter for biological and medical applications.

Cross-Linked Double Network Graphene Oxide/Polymer Composites for Efficient Coagulation-Flocculation

Hybrid coagulant/flocculant consisting of nanomaterials have tremendous potential in solid-liquid separation and can be applied to the coagulation-flocculation-sedimentation process of water treatment. In this work, inspired by the mineralization in nature, a graphene oxide/polymer-based hybrid coagulant/flocculant that precipitates large-scale, multicomponent (e.g., dyes, heavy metal ions, and nanoparticles) and complex pollutants simultaneously at room temperature by forming double-network hydrogel through bioinspired Ca2+ crosslinking, is developed for the purification of wastewater. The coagulation-flocculation-sedimentation method developed here also provides a novel strategy for the preparation of macroscopic assemblies of multicomponents that can be applied to various application fields.

Highly Stretchable, Adaptable, and Durable Strain Sensing Based on a Bioinspired Dynamically Cross-Linked Graphene/Polymer Composite

Flexible strain sensors can detect physical signals (e.g., temperature, humidity, and flow) by sensing electrical deviation under dynamic deformation, and they have been used in diverse fields such as human motion detection, medical care, speech recognition, and robotics. Existing sensing materials have relatively low adaptability and durability and are not stretchable and flexible enough for complex tasks in motion detection. In this work, a highly flexible self-healing conductive polymer composite consisting of graphene, poly(acrylic acid) and amorphous calcium carbonate is prepared via a biomineralization-inspired process. The polymer composite shows good editability and processability and can be fabricated into stretchable strain sensors of various structures (sandwich structures, fibrous structures, self-supporting structures, etc.). The developed sensors can be attached on different types of surfaces (e.g., flat, cambered) and work well both in air and under water in detecting various biosignals, including crawling, undulatory locomotion, and human body motion.

Binder-Free Graphene/Silver Nanowire Gel-Like Composite with Tunable Properties and Multifunctional Applications

To realize macroscopic utilization of the excellent properties of graphene, various forms of graphene assemblies have been investigated. Among them, the gel form assemblies show great advantages because of their shapeable and self-healable properties and facile and simple manufacturing processes. For the conventional gel-formed graphene assemblies, a relatively large content of binders including hydrophilic polymers, celluloses, or/and amorphous inorganic materials is necessary in achieving the gelation. However, these binders are electrically nonconductive and electrochemically inactive, which would weaken the favorable functionalities of the composite, and the potential advantages of graphene cannot be fully utilized. Herein, a binder-free silver nanowire (Ag-NW)/reduced graphene oxide (rGO) gel-like composite is designed and successfully fabricated by employing the ultralong Ag-NWs to enhance the hierarchical synergistic effects. The fabrication technique is highly efficient and repeatable, and the obtained composite is flexible, stretchable, and self-healable. Furthermore, the overall properties of the composite can be easily adjusted in a wide range by controlling the mass ratio between Ag-NW and rGO, which makes it multipurpose and suitable in different applications. Several demonstrations have been carried out, and some special performances including linear strain sensing range and rapid transformation from wet to dry state are found in this unique composite. This binder-free structure could also be expanded to other material systems, which may offer a valuable inspiration for the development of functional devices based on the nanocomposite.

Mechanically robust nanocomposites from screen-printable polymer/graphene nanosheet pastes

Innovative methods for producing graphene-based polymer nanocomposites with excellent mechanical robustness have become a focus for their practical utilization, existing solutions suffer from drawbacks such as limited laboratory-scale fabrication, affordability, and inadequate processability. To address these issues, we proposed a screen printing approach utilizing formulated graphene-modified water-based printable pastes to achieve inexpensive and scalable manufacturing of graphene-reinforced polymer nanocomposites. Leveraging this simple and versatile manufacturing process, mass production, as well as personalized-patterned bulk materials, can be efficiently produced using easily obtainable substrates. The surface-tailored graphene (PEI-rGO) can improve the dispersion quality and strengthen the interfacial bonding with a waterborne polyurethane (WPU) matrix, yielding an optimized enhancement effect and enhancing the tensile strength and Young's modulus about 9.46 and 19.8 times higher than those of the pure WPU, respectively. In particular, their utility as an anti-wear modifier through direct printing on textile and wear-reduction performance were investigated. Our study establishes screen printing as a general strategy to achieve facile fabrication of polymer nanocomposites at an industrial-scale in an economically viable manner, which can to a great extent bridge the gap between scientific research and real-world applications.

Binder-free graphene oxide doughs

Graphene oxide (GO) sheets have been used to construct various bulk forms of GO and graphene-based materials through solution-based processing techniques. Here, we report a highly cohesive dough state of GO with tens of weight percent loading in water without binder-like additives. The dough state can be diluted to obtain gels or dispersions, and dried to yield hard solids. It can be kneaded without leaving stains, readily reshaped, connected, and further processed to make bulk GO and graphene materials of arbitrary form factors and tunable microstructures. The doughs can be transformed to dense glassy solids of GO or graphene without long-range stacking order of the sheets, which exhibit isotropic and much enhanced mechanical properties due to hindered sliding between the sheets. GO dough is also found to be a good support material for electrocatalysts as it helps to form compliant interface to access the active particles.

Graphene oxide (GO) dispersions may be used as starting materials for graphene-based architectures. Here, a malleable and versatile dough state of GO is discovered, completing the GO–water continuum, which can be diluted or converted to glassy GO or graphene solids without long-range stacking order with enhanced mechanical and electrochemical properties

Biomineralization Forming Process and Bio-inspired Nanomaterials for Biomedical Application: A Review

Biomineralization is a process in which organic matter and inorganic matter combine with each other under the regulation of living organisms. Because of the biomineralization-induced super survivability and retentivity, biomineralization has attracted special attention from biologists, archaeologists, chemists, and materials scientists for its tracer and transformation effect in rock evolution study and nanomaterials synthesis. However, controlling the biomineralization process in vitro as precisely as intricate biology systems still remains a challenge. In this review, the regulating roles of temperature, pH, and organics in biominerals forming process were reviewed. The artificially introducing and utilization of biomineralization, the bio-inspired synthesis of nanomaterials, in biomedical fields was further discussed, mainly in five potential fields: drug and cell-therapy engineering, cancer/tumor target engineering, bone tissue engineering, and other advanced biomedical engineering. This review might help other interdisciplinary researchers to bionic-manufacture biominerals in molecular-level for developing more applications of biomineralization.

Graphene-based advanced nanoplatforms and biocomposites from environmentally friendly and biomimetic approaches

Environmentally friendly and biomimetic approaches to fabricate graphene-based advanced nanoplatforms and biocomposites for biomedical applications are summarized in this review.

Mineral plastic hydrogels from the cross-linking of polyacrylic acid and alkaline earth or transition metal ions

Based on ‘Mineral Plastics’, organic–inorganic hybrid hydrogels were synthesized by utilization of different metal ions and pH-values.