Rational Design of Carbon-Rich Materials for Energy Storage and Conversion

Nanoarchitectonics for Pentagon Defects in Carbon: Properties and Catalytic Role in Oxygen Reduction Reaction

The oxygen reduction reaction (ORR) is a crucial process in electrochemical energy technologies, featuring fuel cells and metal-air batteries in the coming carbon-neutral society. Carbon materials have garnered significant attention as economical, sustainable alternatives to precious metal catalysts. In particular, there have been increasing reports recently that pentagons introduced into graphitic carbons promote catalytic activity for ORR. In addition, interesting studies are reported on carbon materials' synthesis, characterization, and spin polarization properties with pentagonal defects. This review comprehensively summarizes the formation mechanism, characterization, spin, oxygen (O2) adsorption, and ORR catalytic activity of carbon catalysts with pentagonal defects. By connecting the dots between theoretical insights and experimental results, this review elucidates the fundamental principles governing pentagon-related activity and offers perspectives on future directions for designing efficient ORR catalysts based on carbon materials.

Polydopamine/Melamine Sponge-Derived Compressible Carbon Foam for High-Performance Supercapacitors

Electrode materials with a deformation capability are vital to the development of flexible supercapacitors. However, the preparation of porous carbons with a deformability remains challenging. Herein, a compressible carbon foam has been successfully prepared using a polydopamine/melamine sponge (PDA/MS) as the precursor material. The porous structure of the carbon foam was controlled by using cetyltrimethylammonium bromide and K2CO3 as template and activating agent, respectively. The resultant PDA/MS-derived carbon foam (KDMC) has a three-dimensional network architecture and exhibits excellent compressibility. The specific surface area reaches ∼2890.0 m2 g-1. Furthermore, KDMC demonstrates outstanding capacitive performance, including excellent specific capacitance (365.6 F g-1, 0.5 A g-1), good rate capability (86.6% capacitance retention from 0.5 to 10 A g-1), and outstanding cycling stability (only 1.9% capacitance loss after 10,000 cycles). To further demonstrate the practical application potential of KDMC, a symmetric supercapacitor (KDMC//KDMC) was assembled with a PVA/KOH gel electrolyte. The symmetric device achieved an energy density of 10.44 W h kg-1. This work presents a robust method to prepare compressible electrode materials for high-performance supercapacitors.

Enzyme Immobilization using Covalent Organic Frameworks: From Synthetic Strategy to COFs Functional Role

Enzymes, a class of biocatalysts, exhibit remarkable catalytic efficiency, specificity, and selectivity, governing many reactions that are essential for various cascades within living cells. The immobilization of structurally flexible enzymes on appropriate supports holds significant importance in facilitating biomimetic transformations in extracellular environments. Covalent organic frameworks (COFs) have emerged as ideal candidates for enzyme immobilization due to high surface tunability, diverse chemical/structural designs, exceptional stability, and metal-free nature. Various immobilization techniques have been proposed to fabricate COF-enzyme biocomposites, offering significant enhancements in activity and reusability for COF-immobilized enzymes as well as new insights into developing advanced enzyme-based applications. In this review, we provide a comprehensive overview of state-of-the-art strategies for immobilizing enzymes within COFs by focusing on their applicability and versatility. These strategies are systematically summarized and compared by categorizing them into postsynthesis immobilization and in situ immobilization, where their respective strengths and limitations are thoroughly discussed. Combined with an overview of critical emerging applications, we further elucidate the multifaceted roles of COFs in enzyme immobilization and subsequent applications, highlighting the advanced biofunctionality achievable through COFs.

Microcrystalline Nanofiber Electrode with Adaptive Intrinsic Structure and Microscopic Interface

A strategy of microcrystalline aggregation is proposed to fabricate energy storage electrode with outstanding capacity and stability. Carbon-rich electrode (BDTG) functionalized with benzo[1,2-b:4,5-b']dithiophene units and butadiyne segments are prepared. The linear conjugate chains pack as microcrystalline nanofibers on nanoscale, which further aggregates to form a porous interpenetrating network. The microcrystalline aggregation feature of BDTG exhibit stable structure during long cycling test, revealing the following advantage in structure and property. The stretchable butadiyne linker facilitates reversible adsorption and desorption of Li with the aid of adjacent sulfur heteroatom. The alkyne-alkene transition exhibits intrinsic structural stability of microcrystalline region in BDTG electrodes. Meanwhile, alkynyl groups and sulfur heteroatoms on the surface of BDTG nanofibers participate in the formation of microscopic interface, providing a stable interfacial contact between BDTG electrodes and adjacent electrolyte. As a proof-of-concept, BDTG-based electrode shows high capacity (1430 mAh g-1 at 50 mA g-1) and excellent cycle performance (8000 cycles under 5 A g-1) in half-cell of lithium-ion batteries, and a reversible capacity of 120 mAh g-1 is obtained under the current density of 2 C in full-cell. This work shows microcrystalline aggregation is beneficial to realize adaptive intrinsic structure and interface contact during the charge-discharge process.

Hierarchical Hollow Carbon Particles with Encapsulation of Carbon Nanotubes for High Performance Supercapacitors

A novel and sustainable carbon-based material, referred to as hollow porous carbon particles encapsulating multi-wall carbon nanotubes (MWCNTs) (CNTs@HPC), is synthesized for use in supercapacitors. The synthesis process involves utilizing LTA zeolite as a rigid template and dopamine hydrochloride (DA) as the carbon source, along with catalytic decomposition of methane (CDM) to simultaneously produce MWCNTs and COx -free H2 . The findings reveal a distinctive hierarchical porous structure, comprising macropores, mesopores, and micropores, resulting in a total specific surface area (SSA) of 913 m2  g-1 . The optimal CNTs@HPC demonstrates a specific capacitance of 306 F g-1 at a current density of 1 A g-1 . Moreover, this material demonstrates an electric double-layer capacitor (EDLC) that surpasses conventional capabilities by exhibiting additional pseudocapacitance characteristics. These properties are attributed to redox reactions facilitated by the increased charge density resulting from the attraction of ions to nickel oxides, which is made possible by the material's enhanced hydrophilicity. The heightened hydrophilicity can be attributed to the presence of residual silicon-aluminum elements in CNTs@HPC, a direct outcome of the unique synthesis approach involving nickel phyllosilicate in CDM. As a result of this synthesis strategy, the material possesses excellent conductivity, enabling rapid transportation of electrolyte ions and delivering outstanding capacitive performance.

Hybrid nanoarchitectonics of coal-derived carbon with oxidation-induced morphology-selectivity for high-performance supercapacitor

Coal-derived porous carbon with a large specific surface area is a common electrode material for supercapacitors. Its deep and branched micropores, dense bulk morphology and amorphous structure have greatly limited its practical applications. Herein, hybrid carbon materials were obtained from coal through oxidation followed by activation. The method allows tuning the morphology, porosity, structure, and the degree of graphitization. The pre-oxidation with KMnO₄ can break raw coal into small hydrocarbon fragments, which deposit and grow on the surface of generated MnO during pyrolysis leading to hybrid carbon with mesoporous and graphitic nanostructures. Meanwhile, homogeneous etching of the carbon skeleton by the reaction intermediate of K₂CO₃ led to the formation of abundant active sites. Hence, the optimized sample exhibited a high capacitance of 333 F g^-1 at 1 A g^-1, an excellent rate capability with 58% capacitance retention at 100 A g^-1 and superior cycle durability in a three-electrode system. Besides, an assembled symmetric two-electrode device displayed a high energy density of 8.9 Wh·kg^-1 at 250 W·kg^-1. This work proposed a facile and rational synthesis strategy by balancing the tradeoff between active sites and intrinsic conductivity and thus provided a new avenue for the value-added utilization of coal.

Aprotic Lithium-Carbon Dioxide Batteries: Reaction Mechanism and Catalyst Design

In recent years, the combustion of fossil fuels leads to the release of a large amount of CO₂ gas, which induces the greenhouse effect and the energy crisis. To solve these problems, researchers have turned their focus to a novel Li-CO₂ battery (LCB). LCB has received much attention because of its high theoretical energy density and reversible CO₂ reduction/evolution process. So far, the emerging LCB still faces many challenges derived from the slow reaction kinetics of discharge products. In this review, the latest status and progress of LCB, especially the influence of the structure design of cathode catalysts on the battery performance, are systematically elaborated. This review summarizes in detail the existing issues and possible solutions of LCB, which is of high research value for further promoting the development of Li-Air battery.

Graphitic Aza-Fused π-Conjugated Networks: Construction, Engineering, and Task-Specific Applications

2D π-conjugated networks linked by aza-fused units represent a pivotal category of graphitic materials with stacked nanosheet architectures. Extensive efforts have been directed at their fabrication and application since the discovery of covalent triazine frameworks (CTFs). Besides the triazine cores, tricycloquinazoline and hexaazatriphenylene linkages are further introduced to tailor the structures and properties. Diverse related materials have been developed rapidly, and a thorough outlook is necessitated to unveil the structure-property-application relationships across multiple subcategories, which is pivotal to guide the design and fabrication toward enhanced task-specific performance. Herein, the structure types and development of related materials including CTFs, covalent quinazoline networks, and hexaazatriphenylene networks, are introduced. Advanced synthetic strategies coupled with characterization techniques provide powerful tools to engineer the properties and tune the associated behaviors in corresponding applications. Case studies in the areas of gas adsorption, membrane-based separation, thermo-/electro-/photocatalysis, and energy storage are then addressed, focusing on the correlation between structure/property engineering and optimization of the corresponding performance, particularly the preferred features and strategies in each specific field. In the last section, the underlying challenges and opportunities in construction and application of this emerging and promising material category are discussed.

Hypercrosslinked Polymer Gels as a Synthetic Hybridization Platform for Designing Versatile Molecular Separators

Hypercrosslinked polymers (HCPs), amorphous microporous three-dimensional networks based on covalent linkage of organic building blocks, are a promising class of materials due to their high surface area and easy functionalization; however, this type of material lacks processability due to its network rigidity based on covalent crosslinking. Indeed, the development of strategies to improve its solution processability for broader applications remains challenging. Although HCPs have similar three-dimensionally crosslinked networks to polymer gels, HCPs usually do not form gels but insoluble powders. Herein, we report the synthesis of HCP gels from a thermally induced polymerization of a tetrahedral monomer, which undergoes consecutive solubilization, covalent bond formation, colloidal formation, followed by their aggregation and percolation to yield a hierarchically porous network. The resulting gels feature concentration-dependent hierarchical porosities and mechanical stiffness. Furthermore, these HCP gels can be used as a platform to achieve molecular-level hybridization with a two-dimensional polymer during the HCP gel formation. This method provides functional gels and corresponding aerogels with the enhancement of porosities and mechanical stiffness. Used in column- and membrane-based molecular separation systems, the hybrid gels exhibited a separation of water contaminants with the efficiency of 97.9 and 98.6% for methylene blue and KMnO₄, respectively. This result demonstrated the potentials of the HCP gels and their hybrid derivatives in separation systems requiring macroscopic scaffolds with hierarchical porosity.

Synthesis of a Bent, Twisted, and Chiral Phenanthrene via an Iodine Monochloride-Mediated, Strain-Inducing π-Extension Reaction

A strategy for the synthesis of substituted and strained p-phenylene units is reported. An oxidative allylic alcohol rearrangement, followed by organometallic addition to the resulting α-ketol and subsequent dehydrative aromatization, affords p-terphenyl-containing macrocycles in which the central p-phenylene has been selectively substituted. Ten 18-membered macrocycles have been synthesized, eight of which contain substituents that could enable π-extension. Only alkynylated derivatives were amenable to π-extension via an ICl-mediated reaction, affording a highly bent, twisted, and chiral phenanthrene.

Preparation of porous biochar and its application in supercapacitors

In this study, economical porous biochar was prepared from an apricot shell and used as an electrode material for a supercapacitor, showing excellent capacitance, cycling stability and rate performance.

Mathematical Tool Based on Breakthrough Curves to Evaluate the Economic Advantages of Chemical Regeneration of Activated Carbon in Power Plants: A Comparative Study

A mathematical tool has been developed to evaluate the economic advantages of in-situ chemical regeneration of fixed-bed industrial adsorbers of granular activated carbon for cooling water treatment systems in Cuban power plants. Two scenarios of activated carbon (AC) management in a power plant were compared by applying the proposed model. The economic profit by implementing the regeneration strategy as a function of the number of regeneration cycles was determined and optimized. Breakthrough curves were obtained to assess the adsorption performance of the AC after progressive saturation–chemical regeneration cycles using synthetic water and hydrochloric acid, respectively. For the first saturation cycle, the breakthrough time was 272 min and after 10 cycles, it was reduced to 58 min, indicating a decrease of the adsorption capacity of 21%. The AC adsorption performance in terms of saturation time as a function of the number of regeneration cycles was considered one of the tool parameters. The proposed tool allows to determine the optimal number of regeneration cycles for a maximum economic profit in the regeneration strategy. It was demonstrated, using the proposed tool, that after an optimum of seven regeneration cycles, the power plant expends only 26% of the total investment. The simplicity of the tool permits a rapid way to find the most profitable number of regeneration cycles by combining economic, technical and adsorption efficiency parameters in one function, thus improving the AC management strategy at an industrial scale with corresponding environmental and economic advantages, including sustainability.

Regio- and Stereoselective Syn-Boronation of Terminal Alkynes Catalyzed by Copper Nanospheres on Graphene Nanosheets

Evenly distributed copper nanospheres on reduced graphene oxide were prepared and showed high heterogeneous catalytic activity in converting varying terminal alkynes into (E)-β-styrene boronate esters. The excellent catalytic performance was achieved through the synergistic catalysis between Cu nanospheres and rGO. This work not only is a supplement for preparing (E)-β-styrene boronate esters but also provides a way for the rational designing of high-performance graphene-based catalysts. Meanwhile, the advancement of graphene-based nanomaterials will be motivated to promote their applications in the development of green catalytic chemistry.

Edge-Rich Reduced Graphene Oxide Embedded in Silica-Based Laminated Ceramic Composites for Efficient and Robust Electrocatalytic Hydrogen Evolution

To mitigate the energy crisis and environmental pollution, efficient and earth-abundant hydrogen evolution reaction (HER) electrocatalysts are essential for hydrogen production through electrochemical water splitting. Graphene-based materials as metal-free catalysts have attracted significant attention but suffer from insufficient activity and stability. Therefore, a novel and economical approach is developed to prepare highly active, robust, and self-supported reduced graphene oxide (rGO)/SiO₂ ceramic composites as electrocatalysts in HER. Through intercalation and pressure sintering, the rGO sheets are parallelly aligned and embedded into a dense and chemically inert SiO₂ matrix, ensuring the electrical conductivity and stability of the prepared composites. After directional cutting, the edges of the oriented rGO sheets become fully exposed on the composite surface, acting as highly electrocatalytic active sites in HER, as confirmed by density functional theory calculations. The 4 vol% rGO/SiO₂ composite displays superior electrocatalytic performance, featuring a low overpotential (134 mV) at a current density of 10 mA cm^-2 , a small Tafel slope (103 mV dec^-1 ), and excellent catalytic durability in 0.5 m H₂ SO₄ . This study provides a new yet cost-effective strategy to prepare metal-free, robust, and edge-rich rGO/ceramic composites as a highly electrocatalytic active catalyst for HER applications.

Lamellar carbon-aluminosilicate nanocomposites with macroscopic orientation

Novel preparative approaches towards lamellar nanocomposites of carbon and inorganic materials are relevant for a broad range of technological applications. Here, we describe how to utilize the co-assembly of a liquid-crystalline hexaphenylene amphiphile and an aluminosilicate precursor to prepare carbon-aluminosilicate nanocomposites with controlled lamellar orientation and macroscopic order. To this end, the shear-induced alignment of a precursor phase of the two components resulted in thin films comprising lamellae with periodicities on the order of the molecular length scale, an "edge-on" orientation relative to the substrate and parallel to the shearing direction with order on the centimeter length scale. The lamellar structure, orientation, and macroscopic alignment were preserved in the subsequent pyrolysis that yielded the corresponding carbon-aluminosilicate nanocomposites.

Phosphorus-doping-induced kinetics modulation for nitrogen-doped carbon mesoporous nanotubes as superior alkali metal anode beyond lithium for high-energy potassium-ion hybrid capacitors

Alkali metal ion beyond lithium based energy storage systems have recently attracted increasing attention due to their unique advantages of high natural abundance and low cost. Herein, we report the fabrication of P,N-codoped carbon mesoporous nanotubes (denoted as PNC-MeNTs) through a facile two-step strategy with MnO₂ nanowires as a dual-function sacrificing template, where the in situ oxidative polymerization formation of pyrrole-aniline-phytic acid composite nanotubes and a subsequent carbonization treatment are involved. The PNC-MeNTs exhibit outstanding electrochemical performance for both Na⁺ and K⁺ storage, respectively, where high specific capacities of 287.2 mA h g^-1 and 219.6 mA h g^-1 at 0.1 A g^-1 and remarkable cycling stability over 10 000 cycles at 10 A g^-1 and 3000 cycles at 1 A g^-1 can be achieved. More importantly, potassium-ion hybrid capacitors with a PNC-MeNT anode and an activated carbon cathode can deliver remarkable energy/power density of 175.1 W h kg^-1/160.6 W kg^-1, as well as a long cycling life. The possible origins and storage mechanisms are investigated with combined characterization methods including in situ Raman spectroscopy and a galvanostatic intermittent titration technique. This study may introduce a new avenue for designing carbonaceous electrode candidates for future high-performance energy storage devices.

Flexible 3D carbon cloth as a high-performing electrode for energy storage and conversion

High-performance energy storage and conversion devices with high energy density, power density and long-term cycling life are of great importance in current consumer electronics, portable electronics and electric vehicles. Carbon materials have been widely investigated and utilized in various energy storage and conversion devices due to their excellent conductivity, mechanical and chemical stability, and low cost. Abundant excellent reviews have summarized the most recent progress and future outlooks for most of the current prime carbon materials used in energy storage and conversion devices, such as carbon nanotubes, fullerene, graphene, porous carbon and carbon fibers. However, the significance of three-dimensional (3D) commercial carbon cloth (CC), one of the key carbon materials with outstanding mechanical stability, high conductivity and flexibility, in the energy storage and conversion field, especially in wearable electronics and flexible devices, has not been systematically summarized yet. In this review article, we present a careful investigation of flexible CC in the energy storage and conversion field. We first give a general introduction to the common properties of CC and the roles it has played in energy storage and conversion systems. Then, we meticulously investigate the crucial role of CC in typical electrochemical energy storage systems, including lithium-ion batteries, sodium-ion batteries, lithium-sulfur batteries and supercapacitors. Following a description of the wide application potential of CC in electrocatalytic hydrogen evolution, oxygen evolution/reduction, full-water splitting, etc., we will give a brief introduction to the application of CC in the areas of photocatalytically and photoelectrochemically induced solar energy conversion and storage. The review will end with a brief summary of the typical superiorities that CC has in current energy conversion and storage systems, as well as providing some perspectives and outlooks on its future applications in the field. Our main interest will be focused on CC-based flexible devices due to the inherent superiority of CC and the increasing demand for flexible and wearable electronics.

Defect Rich Hierarchical Porous Carbon for High Power Supercapacitors

Tuning hierarchical pore structure of carbon materials is an effective way to achieve high energy density under high power density of carbon-based supercapacitors. However, at present, most of methods for regulating pores of carbon materials are too complicated to be achieved. In this work, a durian shell derived porous carbon (DSPC) with abundant porous is prepared through chemical activation as a defect strategy. Hierarchical porous structure can largely enhance the transfer rate of electron/ion. Furthermore, DSPC with multiple porous structure exhibits excellent properties when utilized as electrode materials for electric double layer capacitors (EDLCs), delivering a specific capacitance of 321 F g-1 at 0.5 A g-1 in aqueous electrolyte. Remarkably, a high energy density of 27.7 Wh kg-1 is obtained at 675 W kg-1 in an organic two-electrode device. And large capacity can be remained even at high charge/discharge rate. Significantly, hierarchical porous structure allows efficient ion diffusion and charge transfer, resulting in a prominent cycling stability. This work is looking forward to providing a promising strategy to prepare hierarchical porous carbon-based materials for supercapacitors with ultrafast electron/ion transport.

Designing ionic channels in novel carbons for electrochemical energy storage

Tremendous efforts have been dedicated to developing high-performance energy storage devices based on the micro- or nano-manipulation of novel carbon electrodes, as certain nanocarbons are perceived to have advantages such as high specific surface areas, superior electric conductivities, excellent mechanical properties and so on. In typical electrochemical electrodes, ions are intercalated/deintercalated into/from the bulk (for batteries) or adsorbed/desorbed on/from the surface (for electrochemical capacitors). Fast ionic transport, significantly determined by ionic channels in active electrodes or supporting materials, is a prerequisite for the efficient energy storage with carbons. In this report, we summarize recent design strategies for ionic channels in novel carbons and give comments on the promising features based on those carbons towards tailorable ionic channels.

Machine Learning Interatomic Potentials as Emerging Tools for Materials Science

Atomic-scale modeling and understanding of materials have made remarkable progress, but they are still fundamentally limited by the large computational cost of explicit electronic-structure methods such as density-functional theory. This Progress Report shows how machine learning (ML) is currently enabling a new degree of realism in materials modeling: by "learning" electronic-structure data, ML-based interatomic potentials give access to atomistic simulations that reach similar accuracy levels but are orders of magnitude faster. A brief introduction to the new tools is given, and then, applications to some select problems in materials science are highlighted: phase-change materials for memory devices; nanoparticle catalysts; and carbon-based electrodes for chemical sensing, supercapacitors, and batteries. It is hoped that the present work will inspire the development and wider use of ML-based interatomic potentials in diverse areas of materials research.

1D Carbon-Based Nanocomposites for Electrochemical Energy Storage

Electrochemical energy storage (EES) devices have attracted immense research interests as an effective technology for utilizing renewable energy. 1D carbon-based nanostructures are recognized as highly promising materials for EES application, combining the advantages of functional 1D nanostructures and carbon nanomaterials. Here, the recent advances of 1D carbon-based nanomaterials for electrochemical storage devices are considered. First, the different categories of 1D carbon-based nanocomposites, namely, 1D carbon-embedded, carbon-coated, carbon-encapsulated, and carbon-supported nanostructures, and the different synthesis methods are described. Next, the practical applications and optimization effects in electrochemical energy storage devices including Li-ion batteries, Na-ion batteries, Li-S batteries, and supercapacitors are presented. After that, the advanced in situ detection techniques that can be used to investigate the fundamental mechanisms and predict optimization of 1D carbon-based nanocomposites are discussed. Finally, an outlook for the development trend of 1D carbon-based nanocomposites for EES is provided.