Semiconductor Quantum Dots: An Emerging Candidate for CO2 Photoreduction

Analysis of Ag-DP25/PET plasmonic nano-composites as a visible-light photocatalyst for wastewater treatment: Experimental/theoretical studies, and the DFT-MB degradation mechanism

The development of polymeric-composites Agx%DP25-PET (x = 0,1,2,3) may significantly boost the potential application of Agx%DP25 (x = 0,1,2,3) photocatalytic powders. Producing large-scale nano-composites with hybrid-surfaces, that are also flexible materials and easy to employ in a variety of environments. A set of photocatalytic nan-composites embedded with the polymeric binder poly (acrylonitrile-co-butadiene)-dicarboxy terminated (C7H9N) were performed and evaluated for wastewater treatment applications. The results reveal that the flexible polymeric composites (Agx%DP25-PET, x = 0,1,2,3) have photocatalytic activity in aqua media to degrade methylene blue (MB) under visible-light. The addition of C7H9N to immobilize photocatalytic powders on the PET surface reduces photo-generated electron-hole recombination. The materials were characterized by HR-TEM, SEM/EDX, XRD, FT-IR, UV-Vis DRS and PL. The Agx%DP25-PET (x = 0,1,2,3) photocatalytic reactions exhibited productive discoloration/degradation rates, in both aerobic (AE) and anaerobic (AN) environments. The superior photodegradation of Ag2%DP25-PET was attributed to a combination of two effects: LSPR (localized surface plasmon resonance) and Ag-TiO2/environment affinities. The findings of molecular dynamics (MD) simulation and Fukui Function (FF) based on density functional theory (DFT) provide significant insight into the photocatalytic requirements for MB discoloration/degradation. The experimental/theoretical analysis aimed to offer an in-depth understanding of medium/surface interactions on decorated TiO2 materials, as well as how these interactions affect overall degradation behavior.

Atomic/molecular layer deposition strategies for enhanced CO2 capture, utilisation and storage materials

Elevated levels of carbon dioxide (CO2) in the atmosphere and the diminishing reserves of fossil fuels have raised profound concerns regarding the resulting consequences of global climate change and the future supply of energy. Hence, the reduction and transformation of CO2 not only mitigates environmental pollution but also generates value-added chemicals, providing a dual remedy to address both energy and environmental challenges. Despite notable advancements, the low conversion efficiency of CO2 remains a major obstacle, largely attributed to its inert chemical nature. It is imperative to engineer catalysts/materials that exhibit high conversion efficiency, selectivity, and stability for CO2 transformation. With unparalleled precision at the atomic level, atomic layer deposition (ALD) and molecular layer deposition (MLD) methods utilize various strategies, including ultrathin modification, overcoating, interlayer coating, area-selective deposition, template-assisted deposition, and sacrificial-layer-assisted deposition, to synthesize numerous novel metal-based materials with diverse structures. These materials, functioning as active materials, passive materials or modifiers, have contributed to the enhancement of catalytic activity, selectivity, and stability, effectively addressing the challenges linked to CO2 transformation. Herein, this review focuses on ALD and MLD's role in fabricating materials for electro-, photo-, photoelectro-, and thermal catalytic CO2 reduction, CO2 capture and separation, and electrochemical CO2 sensing. Significant emphasis is dedicated to the ALD and MLD designed materials, their crucial role in enhancing performance, and exploring the relationship between their structures and catalytic activities for CO2 transformation. Finally, this comprehensive review presents the summary, challenges and prospects for ALD and MLD-designed materials for CO2 transformation.

Bioelectrochemical cascade reaction for energy-saving hydrogen production and innovative Zn-air batteries

The oxygen evolution reaction (OER) is an important half-reaction in electrochemical hydrogen production (EHP) and rechargeable metal-air batteries. However, the sluggish OER kinetics has seriously impeded their performance. Herein, we report a bioelectrochemical cascade system composed of glucose oxidase (GOx)-functionalized N-doped porous carbon nanofibers to replace OER in EHP and rechargeable Zn-air batteries (ZABs) applications. In this cascade system, GOx catalyzes oxidation of glucose to produce value-added gluconic acid accompanied with the generation of H2O2 under aerobic conditions. The subsequent electrocatalytic oxidation of H2O2 replacing the OER results in an onset voltage below 1.10 V for EHP, and a low charging voltage of 1.35 V as well as a small charging/discharging voltage gap of ∼ 280 mV over 170 h for ZABs in neutral aqueous electrolytes. The advantages of employing the innovative bioelectrochemical cascade reaction are demonstrated in EHP and ZABs, achieving the full utilization of biomass energy in energy-saving electrochemical systems for energy storage and conversion.

Perovskite Nanocrystals In Situ Encapsulated in TiO2 Microspheres for Stable CO2 Photoreduction in Water

Photoreduction of carbon dioxide (CO2) into fuels presents a promising approach to mitigate global warming and energy crises. Halide perovskite nanocrystals (NCs) with prominent optoelectronic properties have triggered substantial attention as photocatalysts but are limited by the charge recombination and instability. Here, we develop stable CsPbBr3/titania microspheres (TMs) by in situ growth of CsPbBr3 NCs inside mesoporous TMs through solid-state sintering, which significantly improves the stability of perovskite NCs, making them applicable in water with efficient CO2 photoreduction performance. Notably, the CsPbBr3/TMs demonstrates a 6.73- and 9.23-fold increase in the rate of CH4 production compared to TMs and CsPbBr3, respectively. The internal electric field facilitates S-scheme charge transfer, enhancing the separation of electron-hole pairs, as evidenced by X-ray photoelectron spectroscopy and electron paramagnetic resonance analysis, which is pivotal for the selective photoreduction of CO2. These insights pave the way for the design of CsPbBr3-based photocatalysts with superior efficiency and stability.

Integration of Co Single Atoms and Ni Clusters on Defect-Rich ZrO2 for Strong Photothermal Coupling Boosts Photocatalytic CO2 Reduction

We report a solvothermal method for the synthesis of an oxygen vacancy-enriched ZrO2 photocatalyst with Co single atoms and Ni clusters immobilized on the surface. This catalyst presents superior performance for the reduction of CO2 in H2O vapor, with a CO yield reaching 663.84 μmol g-1 h-1 and a selectivity of 99.52%. The total solar-to-chemical energy conversion efficiency is up to 0.372‰, which is among the highest reported values. The success, on one hand, depends on the Co single atoms and Ni clusters for both extended spectrum absorption and serving as dual-active centers for CO2 reduction and H2O dissociation, respectively; on the other hand, this is attributed to the enhanced photoelectric and thermal effect induced by concentrated solar irradiation. We demonstrate that an intermediate impurity state is formed by the hybridization of the d-orbital of single-atom Co with the molecular orbital of H2O, enabling visible-light-driven excitation over the catalyst. In addition, Ni clusters play a crucial role in altering the adsorption configuration of CO2, with the localized surface plasmon resonance effect enhancing the activation and dissociation of CO2 induced by visible-near-infrared light. This study provides valuable insights into the synergistic effect of the dual cocatalyst toward both efficient photothermal coupling and surface redox reactions for solar CO2 reduction.

Construction of Cs2AgBiCl6/COF Heterojunction for Boosted Photocatalytic Thioester Oxidation

Lead-free halide perovskites as a new kind of potential candidate for photocatalytic organic synthesis have attracted much attention recently. The rational heterojunction construction is regarded as an efficient strategy to delicately regulate their catalytic performances. Herein, a semi-conductive covalent organic framework (COF) nanosheet, C4N, is employed as the functional component to construct Cs2AgBiCl6/C4N (CABC/C4N) heterojunction. It is found that the C4N nanosheets with rich surface functional groups can serve as heterogeneous nucleation sites to manipulate the growth of CABC nanocrystals and afford close contact between each other, therefore facilitate the transfer and spatial separation of photogenerated charge carriers, as verified by in situ X-ray photoelectronic spectroscopy and Kelvin probe force microscopy. Moreover, the oxygen affinity of C4N endows the heterojunctions with outstanding aerobic reactivity, thus improving the photocatalytic performance largely. The optimal CABC/C4N heterojunction delivers a thioanisole conversion efficiency of 100% after 6 h, which is 2.2 and 7.7-fold of that of CABC and C4N. This work provides a new ideal for the design and application of lead-free perovskite heterojunction photocatalysts for organic reactions.

Atomically Dispersed Metal Catalysts for the Conversion of CO2 into High-Value C2+ Chemicals

The conversion of carbon dioxide (CO2) into value-added chemicals with two or more carbons (C2+) is a promising strategy that cannot only mitigate anthropogenic CO2 emissions but also reduce the excessive dependence on fossil feedstocks. In recent years, atomically dispersed metal catalysts (ADCs), including single-atom catalysts (SACs), dual-atom catalysts (DACs), and single-cluster catalysts (SCCs), emerged as attractive candidates for CO2 fixation reactions due to their unique properties, such as the maximum utilization of active sites, tunable electronic structure, the efficient elucidation of catalytic mechanism, etc. This review provides an overview of significant progress in the synthesis and characterization of ADCs utilized in photocatalytic, electrocatalytic, and thermocatalytic conversion of CO2 toward high-value C2+ compounds. To provide insights for designing efficient ADCs toward the C2+ chemical synthesis originating from CO2, the key factors that influence the catalytic activity and selectivity are highlighted. Finally, the relevant challenges and opportunities are discussed to inspire new ideas for the generation of CO2-based C2+ products over ADCs.

Trinuclear Cu-based covalent organic framework: π-conjugated framework regulating electron delocalization to promote photoreduction CO2

Sunlight-driven CO2 reduction to value-added chemicals is an effective strategy to promote carbon recycling. The exploration of catalysts with efficient charge separation is crucially important for highly efficient CO2 photoreduction. In this work, the preparation of metal-cluster-based covalent organic framework (CuABD) integrated features from both metal organic frameworks (MOFs) and covalent organic frameworks (COFs) through the condensation of diamines and functionalized trinuclear copper clusters demonstrate a thoughtful design strategy. The reported yield of 1.3 mmol g-1 h-1 for formic acid (HCOOH) under simulated solar irradiation is impressive, surpassing the performance of many COF- and MOF-based catalysts previously reported. Compared to its isomorphic metal-free structure (named BDFTD) and bare trinuclear Cu cluster which present extremely poor catalytic activities, CuABD displays remarkably enhanced CO2 reduction activity. Experimental and theoretical investigations reveal that the efficient charge transfer between diamine monomer and cyclic trinuclear copper (I) units, and the electron delocalization of the π-conjugated framework are responsible for the appealing catalytic performance. In summary, the work presents a well-structured and scientifically sound exploration of a metal-cluster-based covalent organic framework for efficient CO2 reduction under sunlight.

The role of surface functionalization in quantum dot-based photocatalytic CO2 reduction: balancing efficiency and stability

Photocatalytic CO2 reduction offers a promising strategy to produce hydrocarbons without reliance on fossil fuels. Visible light-absorbing colloidal nanomaterials composed of earth-abundant metals suspended in aqueous media are particularly attractive owing to their low-cost, ease of separation, and highly modifiable surfaces. The current study explores such a system by employing water-soluble ZnSe quantum dots and a Co-based molecular catalyst. Water solubilization of the quantum dots is achieved with either carboxylate (3-mercaptopropionic acid) or ammonium (2-aminoethanethiol) functionalized ligands to produce nanoparticles with either negatively or positively-charged surfaces. Photocatalysis experiments are performed to compare the effectiveness of these two surface functionalization strategies on CO2 reduction and ultrafast spectroscopy is used to reveal the underlying photoexcited charge dynamics. We find that the positively-charged quantum dots can support sub-picosecond electron transfer to the carboxylate-based molecular catalyst and also produce >30% selectivity for CO and >170 mmolCO gZnSe-1. However, aggregation reduces activity in approximately one day. In contrast, the negatively-charged quantum dots exhibit >10 ps electron transfer and substantially lower CO selectivity, but they are colloidally stable for days. These results highlight the importance of the quantum dot-catalyst interaction for CO2 reduction. Furthermore, multi-dentate catalyst molecules create a trade-off between photocatalytic efficiency from strong interactions and deleterious aggregation of quantum dot-catalyst assemblies.

Accelerated Photocatalytic Carbon Dioxide Reduction and Water Oxidation under Spatial Synergy

Photocatalytic conversion of CO2 and H2 O into fuels and oxygen is a highly promising solution for carbon-neutral recycling. Traditionally, researchers have studied CO2 reduction and H2 O oxidation separately, overlooking potential synergistic interplay between these processes. This study introduces an innovative approach, spatial synergy, which encourages synergistic progress by bringing the two half-reactions into atomic proximity. To facilitate this, we developed a defective ZnIn2 S4 -supported single-atom Cu catalyst (Cu-SA/D-ZIS), which demonstrates remarkable catalytic performance with CO2 reduction rates of 112.5 μmol g-1  h-1 and water oxidation rates of 52.3 μmol g-1  h-1 , exhibiting a six-fold enhancement over D-ZIS. The structural characterization results indicated that the trapping effect of vacancy associates on single-atom copper led to the formation of an unsaturated coordination structure, Cu-S3 , consequently giving rise to the CuZn 'VS ⋅⋅VZn " defect complexes. FT-IR studies coupled with theoretical calculations reveal the spatially synergistic CO2 reduction and water oxidation on CuZn 'VS ⋅⋅VZn ", where the breakage of O-H in water oxidation is synchronized with the formation of *COOH, significantly lowering the energy barrier. Notably, this study introduces and, for the first time, substantiates the spatial synergy effect in CO2 reduction and H2 O oxidation through a combination of experimental and theoretical analyses, providing a fresh insight in optimizing photocatalytic system.

All-inorganic lead halide perovskites for photocatalysis: a review

Nowadays, environmental pollution and the energy crisis are two significant concerns in the world, and photocatalysis is seen as a key solution to these issues. All-inorganic lead halide perovskites have been extensively utilized in photocatalysis and have become one of the most promising materials in recent years. The superior performance of all-inorganic lead halide perovskites distinguish them from other photocatalysts. Since pure lead halide perovskites typically have shortcomings, such as low stability, poor active sites, and ineffective carrier extraction, that restrict their use in photocatalytic reactions, it is crucial to enhance their photocatalytic activity and stability. Huge progress has been made to deal with these critical issues to enhance the effects of all-inorganic lead halide perovskites as efficient photocatalysts in a wide range of applications. In this manuscript, the synthesis methods of all-inorganic lead halide perovskites are discussed, and promising strategies are proposed for superior photocatalytic performance. Moreover, the research progress of photocatalysis applications are summarized; finally, the issues of all-inorganic lead halide perovskite photocatalytic materials at the current state and future research directions are also analyzed and discussed. We hope that this manuscript will provide novel insights to researchers to further promote the research on photocatalysis based on all-inorganic lead halide perovskites.

Generating Long-Lived Charge Carriers in CdS Quantum Dots by Cu-Doping for Photocatalytic CO2 Reduction

Converting CO2 into high-value-added chemicals has been recognized as a promising way to tackle the fossil fuel crisis. Quantum dots (QDs) have been extensively studied for photocatalytic CO2 reduction due to their excellent optoelectronic properties. However, most of the photogenerated charge carriers recombine before they participate in the photocatalytic reaction. It is crucial to regulate the charge carriers to minimize undesired charge recombination, thus, promoting surface photocatalysis. Herein, we report a copper-doped CdS (Cu:CdS) QD photocatalyst for CO2 reduction. Density functional theory simulations and experimental results demonstrate that Cu dopants create intermediate energy levels in CdS QDs that can extend the lifetime of exciton charge carriers. Furthermore, the long-lived charge carriers can be harnessed for the photocatalytic reaction on Cu:CdS QDs. The resultant Cu:CdS QDs exhibited a significantly enhanced photocatalytic activity toward CO2 reduction compared to the pristine CdS QDs. This work highlights the importance of charge regulation in photocatalysts and opens new pathways for the exploration of efficient QD photocatalysts.

Minimizing CO2 emissions by photocatalytic CO2 reduction to CH3OH over Li2MnO3/WO3 heterostructures under visible illumination

Photocatalytic CO2 reduction to valuable fuels has proved to be a favourable process to produce renewable energy and reduce CO2 emissions, which mostly depends on designing effective photocatalysts with the rapid separation rate of charge carriers. In this contribution, mesoporous n-n heterojunction Li2MnO3/WO3 nanocomposites were designed via a simplistic sol-gel process for CO2 reduction utilizing visible illumination (λ > 420 nm). XRD and TEM measurements confirmed the synthesized Li2MnO3/WO3 nanocomposite is a monoclinic structure, and its particle size is 25 ± 5 nm. The obtained Li2MnO3/WO3 exhibited narrower bandgap energy (1.74 eV), larger surface area (212 m2g-1), exceedingly visible absorbing, and lower recombination of electron and hole. The yield of CH3OH was determined about 198, 871, 1140, 1550 and 1570 mmolg-1 for bare WO3 and 5%, 10%, 15% and 20% Li2MnO3/WO3 nanocomposites, respectively. These results evidenced that the 15% Li2MnO3/WO3 photocatalyst exhibited the best reduction ability compared to other nanocomposites. The CO2 reduction over 15% Li2MnO3/WO3 photocatalyst achieved a maximal CO2 conversion with the substantially boosted CH3OH, i.e., 1550 mmolg-1 after 9 h, which was enhanced 7.8 folds great than of WO3 NPs. Mesoporous Li2MnO3/WO3 nanocomposites, in comparison with bare WO3 NPs, created more active sites for facilitating CO2 and had a specific electric field to more effectively separate charge carriers. The Li2MnO3/WO3 photocatalyst has superior photostability during the continuous reduction of CO2 for 45 h with no remarkable decrease. The possible direct S-scheme mechanism for electron transfer over Li2MnO3/WO3 photocatalyst with the enhanced CO2 reduction ability was discussed. The present work demonstrates an avenue for building highly effective heterostructure photocatalysts in solar-energy-induced potential applications.

Light-Driven Metabolic Pathways in Non-Photosynthetic Biohybrid Bacteria

Biomanufacturing via microorganisms relies on carbon substrates for molecular feedstocks and a source of energy to carry out enzymatic reactions. This creates metabolic bottlenecks and lowers the efficiency for substrate conversion. Nanoparticle biohybridization with proteins and whole cell surfaces can bypass the need for redox cofactor regeneration for improved secondary metabolite production in a non-specific manner. Here we propose using nanobiohybrid organisms (Nanorgs), intracellular protein-nanoparticle hybrids formed through the spontaneous coupling of core-shell quantum dots (QDs) with histidine-tagged enzymes in non-photosynthetic bacteria, for light-mediated control of bacterial metabolism. This proved to eliminate metabolic constrictions and replace glucose with light as the source of energy in Escherichia coli, with an increase in growth by 1.7-fold in 75 % reduced nutrient media. Metabolomic tracking through carbon isotope labeling confirmed flux shunting through targeted pathways, with accumulation of metabolites downstream of respective targets. Finally, application of Nanorgs with the Ehrlich pathway improved isobutanol titers/yield by 3.9-fold in 75 % less sugar from E. coli strains with no genetic alterations. These results demonstrate the promise of Nanorgs for metabolic engineering and low-cost biomanufacturing.

Regulating Oxygen Vacancies and Fermi Level of Mesoporous CeO2-x for Intensified Built-In Electric Field and Boosted Charge Separation of Cs3 Bi2 Br9 /CeO2-x S-Scheme Heterojunction

Regulating the built-in electric field (BEF) in the heterojunction is is a great challenge in developing high-efficiency photocatalysts. Herein, by tailoring the content of oxygen vacancies in the constituent reduction semiconductor (mesoporous CeO2-x ), a precise Fermi level (EF ) regulation of CeO2-x is realized, yielding an amplified EF gap and intensified BEF in the Cs3 Bi2 Br9 perovskite quantum dots/CeO2-x S-scheme heterojunction. Such an enhanced BEF offers a strong driving force for directional electron transfer, boosting charge separation in the S-scheme heterojunction. As a result, the optimized Cs3 Bi2 Br9 /CeO2-x heterojunction delivers a remarkable CO2 conversion efficiency, with an impressive CO production rate of 80.26 µmol g-1  h-1 and a high selectivity of 97.6%. The S-scheme charge transfer mode is corroborated comprehensively by density functional theory (DFT) calculations, in situ X-ray photoelectron spectroscopy (XPS), and photo-irradiated Kelvin probe force microscopy (KPFM). Moreover, diffuse reflectance infrared Fourier transform spectra (DRIFTS) and theoretical calculations are conducted cooperatively to reveal the CO2 photoreduction pathway.

Enhancing photoelectrochemical CO2 reduction with silicon photonic crystals

The effectiveness of silicon (Si) and silicon-based materials in catalyzing photoelectrochemistry (PEC) CO2 reduction is limited by poor visible light absorption. In this study, we prepared two-dimensional (2D) silicon-based photonic crystals (SiPCs) with circular dielectric pillars arranged in a square array to amplify the absorption of light within the wavelength of approximately 450 nm. By investigating five sets of n + p SiPCs with varying dielectric pillar sizes and periodicity while maintaining consistent filling ratios, our findings showed improved photocurrent densities and a notable shift in product selectivity towards CH4 (around 25% Faradaic Efficiency). Additionally, we integrated platinum nanoparticles, which further enhanced the photocurrent without impacting the enhanced light absorption effect of SiPCs. These results not only validate the crucial role of SiPCs in enhancing light absorption and improving PEC performance but also suggest a promising approach towards efficient and selective PEC CO2 reduction.

Nickel hydroxide-decorating potassium-doped graphitic carbon nitride for boosting photocatalytic carbon dioxide reduction

In this study, nickel hydroxide (Ni(OH)2) was employed to modify potassium (K)-doped graphitic carbon nitride (g-C3N4, CN) for enhancing photocatalytic CO2 reduction. The light absorption and charge separation performances of CN were enhanced after modification. Experiments and theoretical calculations indicated that the loaded Ni(OH)2 could gather electrons, facilitate adsorption and activation of CO2. The optimized photocatalyst exhibited high CO2 reductive rate with CO and CH4 yields of 42.6 and 3.5 μmol g-1, respectively after 3 h irradiation in the presence of 0.5 mL water, which was 1.4 and 4.6 times higher than the yields on K-doped CN and Ni(OH)2-decorated CN, respectively. This work provides new thought for enhancing CO2 reductive performance of CN.

Insight of the State for Deliberately Introduced A-Site Defect in Nanofibrous LaFeO3 for Boosting Artificial Photosynthesis of CH3OH

Perovskite-type LaFeO3 is regarded as a potentially efficient visible-light photocatalyst owing to its narrow bandgap energy and unique photovoltaic properties. However, the insufficient active sites and the unsatisfactory utilization of photogenerated carriers severely restrict the realistic application of pure LaFeO3. Herein, we fabricated a series of LaxFeO3-δ nanofibers (x = 1.0, 0.95, 0.9, 0.85, 0.8) with an A-site defect via sol-gel combined with the electrospinning technique. Wherein, the nonstoichiometric La0.9FeO3-δ possessed the highest CH3OH yield of 5.30 μmol·g-1·h-1 with good chemical stability. A series of advanced characterizations were applied to investigate the physicochemical properties and charge-carrier behaviors of the samples. The results illustrated that the one-dimensional (1D) nanostructures combined with the appropriate concentration of vacancy defects on the surface contributed to the radial migration of photogenerated carriers, inhibited the recombination of carriers, and provided more CO2 adsorption-activation sites. Furthermore, density functional theory (DFT) calculations were employed to reveal the influence mechanism of vacancy defects on LaFeO3. This work provides a strategy to enhance the performance of photocatalytic CO2 reduction by modulating the induced oxygen vacancies caused by the A-site defect in perovskite oxides.

Recent Advances on Single-Atom Catalysts for Photocatalytic CO2 Reduction

The present energy crisis and environmental challenges may be efficiently resolved by converting carbon dioxide (CO2 ) into various useful carbon products. The development of more effective catalysts has been the main focus of current research on photocatalytic CO2 reduction. Due to their high atomic efficiency and superior catalytic activity, single-atom catalysts (SACs) have attracted considerable interest in catalytic CO2 conversion. This review discusses the current research developments, obstacles, and potential of SACs for photocatalytic CO2 reduction. And further, discusses the principle of photocatalytic carbon dioxide reduction. This work has compared and analyzed the effects of support materials and active site types in SACs on photocatalytic CO2 reduction performance. This work believes that by sharing these developments, some inspiration for the rational design and development of stable and effective photocatalytic CO2 reduction catalysts based on SACs can be provided.

Light-driven Transformation of Carbon Monoxide into Hydrocarbons using CdS@ZnS : VFe Protein Biohybrids

Enzymatic Fisher-Tropsch (FT) process catalyzed by vanadium (V)-nitrogenase can convert carbon monoxide (CO) to longer-chain hydrocarbons (>C2) under ambient conditions, although this process requires high-cost reducing agent(s) and/or the ATP-dependent reductase as electron and energy sources. Using visible light-activated CdS@ZnS (CZS) core-shell quantum dots (QDs) as alternative reducing equivalent for the catalytic component (VFe protein) of V-nitrogenase, we first report a CZS : VFe biohybrid system that enables effective photo-enzymatic C-C coupling reactions, hydrogenating CO into hydrocarbon fuels (up to C4) that can be hardly achieved with conventional inorganic photocatalysts. Surface ligand engineering optimizes molecular and opto-electronic coupling between QDs and the VFe protein, realizing high efficiency (internal quantum yield >56 %), ATP-independent, photon-to-fuel production, achieving an electron turnover number of >900, that is 72 % compared to the natural ATP-coupled transformation of CO into hydrocarbons by V-nitrogenase. The selectivity of products can be controlled by irradiation conditions, with higher photon flux favoring (longer-chain) hydrocarbon generation. The CZS : VFe biohybrids not only can find applications in industrial CO removal for high-value-added chemical production by using the cheap, renewable solar energy, but also will inspire related research interests in understanding the molecular and electronic processes in photo-biocatalytic systems.

Efficient and Direct Functionalization of Allylic sp3 C-H Bonds with Concomitant CO2 Reduction

Solar-driven CO2 reduction integrated with C-C/C-X bond-forming organic synthesis represents a substantially untapped opportunity to simultaneously tackle carbon neutrality and create an atom-/redox-economical chemical synthesis. Herein, we demonstrate the first cooperative photoredox catalysis of efficient and tunable CO2 reduction to syngas, paired with direct alkylation/arylation of unactivated allylic sp3 C-H bonds for accessing allylic C-C products, over SiO2 -supported single Ni atoms-decorated CdS quantum dots (QDs). Our protocol not only bypasses additional oxidant/reductant and pre-functionalization of organic substrates, affording a broad of allylic C-C products with moderate to excellent yields, but also produces syngas with tunable CO/H2 ratios (1 : 2-5 : 1). Such win-win coupling catalysis highlights the high atom-, step- and redox-economy, and good durability, illuminating the tantalizing possibility of a renewable sunlight-driven chemical feedstocks manufacturing industry.

Fundamentals and Challenges of Engineering Charge Polarized Active Sites for CO2 Photoreduction toward C2 Products

ConspectusGlobal warming and climatic deterioration are partly caused by carbon dioxide (CO2) emission. Given this, CO2 reduction into valuable carbonaceous fuels is a win-win route to simultaneously alleviate the greenhouse effect and the energy crisis, where CO2 reduction into hydrocarbon fuels by solar energy may be a potential strategy. Up to now, most of the current photocatalysts photoconvert CO2 to C1 products. It is extremely difficult to achieve production of C2 products, which have higher economic value and energy density, due to the kinetic challenge of C-C coupling of the C1 intermediates. Therefore, to realize CO2 photoreduction to C2 fuels, design of high-activity photocatalysts to expedite the C-C coupling is significant. Besides, the current mechanism for CO2 photoreduction toward C2 fuels is usually uncertain, which is possibly attributed to the following two reasons: (1) It is arduous to determine the actual catalytic sites for the C-C coupling step. (2) It is hard to monitor the low-concentration active intermediates during the multielectron transfer step.Most traditional metal-based photocatalysts usually possess charge balanced active sites that have the same charge density. In this aspect, the neighboring C1 intermediates may also show the same charge distribution, which would lead to dipole-dipole repulsion, thus preventing C-C coupling for producing C2 fuels. By contrast, photocatalysts with charge polarized active sites possess obviously different charge distributions in the adjacent C1 intermediates, which can effectively suppress the electrostatic repulsion to steer the C-C coupling. Based on this analysis, higher asymmetric charge density on the active sites would be more beneficial to anchoring between the adjacent intermediates and active atoms in catalysts, which can boost C-C coupling.In this Account, we summarize various strategies, including vacancy engineering, doping engineering, loading engineering, and heterojunction engineering, for tailoring charge polarized active sites to boost the C-C coupling for the first time. Also, we overview diverse in situ characterization technologies, such as in situ X-ray photoelectron spectroscopy, in situ Raman spectroscopy, and in situ Fourier transform infrared spectroscopy, for determining charge polarized active sites and monitoring reaction intermediates, helping to reveal the internal catalytic mechanism of CO2 photoreduction toward C2 products. We hope this Account may help readers to understand the crucial function of charge polarized active sites during CO2 photoreduction toward C2 products and provide guidance for designing and preparing highly active catalysts for photocatalytic CO2 reduction.

Acceleration of Photocatalytic CO2 Reduction at Intimate Interface in AgBr/BiOBr Heterojunctions via a Co-anion Strategy

Constructing heterojunctions with strong interfacial interactions can accelerate the transfer and separation of photogenerated charge carriers. However, finding a simple strategy to construct tightly connected heterojunctions remains a major challenge. In this work, AgBr/BiOBr S-scheme heterojunctions were designed via a straightforward co-anionic strategy without using a solvent. The experimental results indicate that the AgBr/BiOBr heterojunction with a close contact interface can extend the use of visible light, accelerate the separation, and induce the transfer of photoelectrons and holes while maintaining an excellent redox capacity. Undoubtedly, the photocatalytic reduction rate of carbon dioxide to carbon monoxide by 1.0 AgBr/BiOBr is 87.73 μmol·g-1·h-1 (quantum efficiency is 0.57%), which is 12.15 times and 4.45 times higher than that of pure AgBr and BiOBr, respectively. The present work provides insights into a simple strategy for the preparation of strongly interacting interfacial heterojunctions for photocatalytic CO2 reduction.

Double Cation-π Directed Two-Dimensional Metallacycle-Based Hierarchical Self-Assemblies for Dual-Mode Catalysis

Hierarchical self-assembly of Pt(II) metallacycles for the construction of functional materials has received considerable research interest, owing to their potential to meet increasing complexity and functionality demands while being based on well-defined scaffolds. However, the fabrication of long-range-ordered Pt(II) metallacycle-based two-dimensional hierarchical self-assemblies (2D HSAs) remains a challenge, primarily because of the limitations of conventional orthogonal noncovalent interaction (NCI) motifs and the intrinsic characteristics of Pt(II) metallacycles, making the delicate self-assembly processes difficult to control. Herein, we prepare well-regulated Pt(II)-metallacycle-based 2D HSAs through a directed strategy involving double cation-π interactions derived from C3-symmetric hexagonal Pt(II) metallacycles and C2-symmetric sodium phenate monomers. Spatially confined arrays of planar Pt(II) metallacycles and the selective growth of self-assemblies at desired locations are achieved by employing strong cation-π driving forces with well-defined directionality as the second orthogonal NCI, realizing the bottom-up, three-stage construction of Pt(II)-metallacycle-based 2D HSAs. The resultant 2D HSAs are applied as dual-mode catalysis platforms, which are loaded with two different nanocatalysts, one promoting catalytic oxidation and the other promoting photocatalytic reduction.

Colloidal semiconductor nanocrystals: from bottom-up nanoarchitectonics to energy harvesting applications

Colloidal semiconductor nanocrystals (NCs) have been extensively investigated owing to their unique properties induced by the quantum confinement effect. The advent of colloidal synthesis routes led to the design of stable colloidal NCs with uniform size, shape, and composition. Metal oxides, phosphides, and chalcogenides (ZnE, CdE, PbE, where E = S, Se, or Te) are few of the most important monocomponent semiconductor NCs, which show excellent optoelectronic properties. The ability to build quantum confined heterostructures comprising two or more semiconductor NCs offer greater customization and tunability of properties compared to their monocomponent counterparts. More recently, the halide perovskite NCs showed exceptional optoelectronic properties for energy generation and harvesting applications. Numerous applications including photovoltaic, photodetectors, light emitting devices, catalysis, photochemical devices, and solar driven fuel cells have demonstrated using these NCs in the recent past. Overall, semiconductor NCs prepared via the colloidal synthesis route offer immense potential to become an alternative to the presently available device applications. This feature article will explore the progress of NCs syntheses with outstanding potential to control the shape and spatial dimensionality required for photovoltaic, light emitting diode, and photocatalytic applications. We also attempt to address the challenges associated with achieving high efficiency devices with the NCs and possible solutions including interface engineering, packing control, encapsulation chemistry, and device architecture engineering.

Hybrid Double Perovskite Derived Halides Based on Bi and Alkali Metals (K, Rb): Diverse Structures, Tunable Optical Properties and Second Harmonic Generation Responses

Double perovskites (DP) have attracted extensive attention due to their rich structures and wide application prospects in the field of optoelectronics. Here, we report 15 new Bi-based double perovskite derived halides with the general formula of A2 BBiX6 (A=organic cationic ligand, B=K or Rb, X=Br or I). These materials are synthesized using organic ligands to coordinate with metal ions with a sp3 oxygen, and diverse structure types have been obtained with distinct dimensionalities and connectivity modes. The optical band gaps of these phases can be tuned by changing the halide, the organic ligand and the alkali metal, varying from 2.0 to 2.9 eV. The bromide phases exhibit increasing photoluminescence (PL) intensity with decreasing temperature, while the PL intensity of iodide phases changes nonmonotonically with temperature. Because the majority of these phases are non-centrosymmetric, second harmonic generation (SHG) responses are also measured for selected non-centrosymmetric materials, showing different particle-size-dependent trends. Our findings give rise to a series of new structural types to the DP family, and provide a powerful synthetic handle for symmetry breaking.

Efficient and Selective Photogeneration of Stable N-Centered Radicals via Controllable Charge Carrier Imbalance in Cesium Lead Halide Nanocrystals

Despite the versatility of semiconductor nanocrystals (NCs) in photoinduced chemical processes, the generation of stable radicals has been more challenging due to reverse charge transfer or charge recombination even in the presence of sacrificial charge acceptors. Here, we show that cesium lead halide (CsPbX3) NCs can selectively photogenerate either aminium or aminyl radicals from amines, taking advantage of the controllable imbalance of the electron and hole populations achieved by varying the solvent composition. Using dihalomethane as the solvent, irreversible removal of the electrons from CsPbX3 NCs enabled by the photoinduced halide exchange between the NCs and the dihalomethane resulted in efficient oxidative generation of the aminium radical. In the absence of dihalomethane in solvent, the availability of both electrons and holes resulted in the production of an aminyl radical via sequential hole transfer and reductive N-H bond dissociation. The negative charge of the halide ions on the NC's lattice surface appears to facilitate the aminyl radical production, competing favorably with the reversible charge transfer reverting to the reactant.

Nanoscale Janus Z-Scheme Heterojunction for Boosting Artificial Photosynthesis

Artificial photosynthesis for CO2 reduction coupled with water oxidation currently suffers from low efficiency due to inadequate interfacial charge separation of conventional Z-scheme heterojunctions. Herein, an unprecedented nanoscale Janus Z-scheme heterojunction of CsPbBr3 /TiOx is constructed for photocatalytic CO2 reduction. Benefitting from the short carrier transport distance and direct contact interface, CsPbBr3 /TiOx exhibits significantly accelerated interfacial charge transfer between CsPbBr3 and TiOx (8.90 × 108 s-1 ) compared with CsPbBr3 :TiOx counterpart (4.87 × 107 s-1 ) prepared by traditional electrostatic self-assembling. The electron consumption rate of cobalt doped CsPbBr3 /TiOx can reach as high as 405.2 ± 5.6 µmol g-1 h-1 for photocatalytic CO2 reduction to CO coupled with H2 O oxidation to O2 under AM1.5 sunlight (100 mW cm-2 ), over 11-fold higher than that of CsPbBr3 :TiOx , and surpassing the reported halide-perovskite-based photocatalysts under similar conditions. This work provides a novel strategy to boost charge transfer of photocatalysts for enhancing the performance of artificial photosynthesis.

Designing reliable and accurate isotope-tracer experiments for CO2 photoreduction

The photoreduction of carbon dioxide (CO₂) into renewable synthetic fuels is an attractive approach for generating alternative energy feedstocks that may compete with and eventually displace fossil fuels. However, it is challenging to accurately trace the products of CO₂ photoreduction on account of the poor conversion efficiency of these reactions and the imperceptible introduced carbon contamination. Isotope-tracing experiments have been used to solve this problem, but they frequently yield false-positive results because of improper experimental execution and, in some cases, insufficient rigor. Thus, it is imperative that accurate and effective strategies for evaluating various potential products of CO₂ photoreduction are developed for the field. Herein, we experimentally demonstrate that the contemporary approach toward isotope-tracing experiments in CO₂ photoreduction is not necessarily rigorous. Several examples of where pitfalls and misunderstandings arise, consequently making isotope product traceability difficult, are demonstrated. Further, we develop and describe standard guidelines for isotope-tracing experiments in CO₂ photoreduction reactions and then verify the procedure using some reported photoreduction systems.

Controlling the Photofunctionality of a Polyanionic Heteroleptic Copper(I) Photosensitizer for CO2 Reduction Using Its Ion-pair Formation with Polycationic Ammonium in Aqueous Media

A water-soluble trianionic heteroleptic copper(I) photosensitizer having four sulfonate groups (CuPS^3- ) was found to afford the 1 : 2 ion-pair adduct with dicationic alkylammonium (hexamethonium) cations (HM²⁺ ) in aqueous media, leading to exhibit excellent photophysical and photocatalytic performances owing to the substantial suppression of water-derived non-radiative decay of the photoexcited state.

Modeling Adsorption of CO2 in Rutile Metallic Oxide Surfaces: Implications in CO2 Catalysis

CO₂ is the most abundant greenhouse gas, and for this reason, it is the main target for finding solutions to climatic change. A strategy of environmental remediation is the transformation of CO₂ to an aggregated value product to generate a carbon-neutral cycle. CO₂ reduction is a great challenge because of the large C=O dissociation energy, ~179 kcal/mol. Heterogeneous photocatalysis is a strategy to address this issue, where the adsorption process is the fundamental step. The focus of this work is the role of adsorption in CO₂ reduction by means of modeling the CO₂ adsorption in rutile metallic oxides (TiO₂, GeO₂, SnO_2, IrO₂ and PbO₂) using Density Functional Theory (DFT) and periodic DFT methods. The comparison of adsorption on different metal oxides forming the same type of crystal structure allowed us to observe the influence of the metal in the adsorption process. In the same way, we performed a comparison of the adsorption capability between two different surface planes, (001) and (110). Two CO₂ configurations were observed, linear and folded: the folded conformations were observed in TiO₂, GeO₂ and SnO₂, while the linear conformations were present in IrO₂ and PbO₂. The largest adsorption efficiency was displayed by the (001) surface planes. The CO₂ linear and folded configurations were related to the interaction of the oxygen on the metallic surface with the adsorbate carbon, and the linear conformations were associated with the physisorption and folded configurations with chemisorption. TiO₂ was the material with the best performance for CO₂ interactions during the adsorption.

Stabilization and Performance Enhancement Strategies for Halide Perovskite Photocatalysts

Solar-energy-powered photocatalytic fuel production and chemical synthesis are widely recognized as viable technological solutions for a sustainable energy future. However, the requirement of high-performance photocatalysts is a major bottleneck. Halide perovskites, a category of diversified semiconductor materials with suitable energy-band-enabled high-light-utilization efficiencies, exceptionally long charge-carrier-diffusion-length-facilitated charge transport, and readily tailorable compositional, structural, and morphological properties, have emerged as a new class of photocatalysts for efficient hydrogen evolution, CO₂ reduction, and various organic synthesis reactions. Despite the noticeable progress, the development of high-performance halide perovskite photocatalysts (HPPs) is still hindered by several key challenges: the strong ionic nature and high hydrolysis tendency induce instability and an unsatisfactory activity due to the need for a coactive component to realize redox processes. Herein, the recently developed advanced strategies to enhance the stability and photocatalytic activity of HPPs are comprehensively reviewed. The widely applicable stability enhancement strategies are first articulated, and the activity improvement strategies for fuel production and chemical synthesis are then explored. Finally, the challenges and future perspectives associated with the application of HPPs in efficient production of fuels and value-added chemicals are presented, indicating the irreplaceable role of the HPPs in the field of photocatalysis.

Heterostructure-Engineered Semiconductor Quantum Dots toward Photocatalyzed-Redox Cooperative Coupling Reaction

Semiconductor quantum dots have been emerging as one of the most ideal materials for artificial photosynthesis. Here, we report the assembled ZnS-CdS hybrid heterostructure for efficient coupling cooperative redox catalysis toward the oxidation of 1-phenylethanol to acetophenone/2,3-diphenyl-2,3-butanediol (pinacol) integrated with the reduction of protons to H₂. The strong interaction and typical type-I band-position alignment between CdS quantum dots and ZnS quantum dots result in efficient separation and transfer of electron-hole pairs, thus distinctly enhancing the coupled photocatalyzed-redox activity and stability. The optimal ZnS-CdS hybrid also delivers a superior performance for various aromatic alcohol coupling photoredox reaction, and the ratio of electrons and holes consumed in such redox reaction is close to 1.0, indicating a high atom economy of cooperative coupling catalysis. In addition, by recycling the scattered light in the near field of a SiO₂ sphere, the SiO₂-supported ZnS-CdS (denoted as ZnS-CdS/SiO₂) catalyst can further achieve a 3.5-fold higher yield than ZnS-CdS hybrid. Mechanistic research clarifies that the oxidation of 1-phenylethanol proceeds through the pivotal radical intermediates of ^•C(CH₃)(OH)Ph. This work is expected to promote the rational design of semiconductor quantum dots-based heterostructured catalysts for coupling photoredox catalysis in organic synthesis and clean fuels production.

BSA-assisted hydrothermal conversion of MoS2 nanosheets into quantum dots with high yield and bright fluorescence for constructing a sensing platform via dual quenching effects

With large surface-responsive and excitation-dependent fluorescence, two-dimensional fluorescent quantum dots (QDs) have been receiving tremendous attention to develop their facile synthetic approaches and/or expand their promising applications. Here, a two-step strategy is demonstrated for high-yield production of MoS₂ QDs from MoS₂ powder through first sonication-driven exfoliation and subsequent hydrothermal splitting with the assistance of bovine serum albumin (BSA). Experimentally, ∼100 nm-sized MoS₂ nanosheets are ultrasonically exfoliated from MoS₂ powder in a BSA solution, and further hydrothermally split into ∼ 8.2 nm-sized QDs (NQDs) at 200 °C. In addition to their excellent stability/dispersibility in aqueous solution, the resultant MoS₂ NQDs also exhibit much brighter blue fluorescence than those synthesized by other methods. The strong fluorescence is significantly quenched by p-nitrophenol for constructing a sensitive sensor with high selectivity, which is attributed to dual quenching effects from inner filter effect (IFE) and fluorescence resonance energy transfer (FRET). Interestingly, with the increment of pH from 5 to 10, the ratio of IFE in fluorescence quenching gradually decreases accompanied by an increment of FRET ratio, resulting in the high sensitivity and responsivity for detecting p-nitrophenol at a wide range of pH. Clearly, the MoS₂ NQD-based sensing approach demonstrates a promising potential for selective detection and fast analysis of pollutants in environment monitoring and security screening.

Recent Developments of Microscopic Study for Lanthanide and Manganese Doped Luminescent Materials

Luminescent materials are indispensable for applications in lighting, displays and photovoltaics, which can transfer, absorb, store and utilize light energy. Their performance is closely related with their size and morphologies, exact atomic arrangement, and local configuration about photofunctional centers. Advanced electron microscopy-based techniques have enabled the possibility to study nanostructures with atomic resolution. Especially, with the advanced micro-electro-mechanical systems, it is able to characterize the luminescent materials at the atomic scale under various environments, providing a deep understanding of the luminescent mechanism. Accordingly, this review summarizes the recent achievements of microscopic study to directly image the microstructure and local environment of activators in lanthanide and manganese (Ln/Mn²⁺ )-doped luminescent materials, including: 1) bulk materials, the typical systems are nitride/oxynitride phosphors; and 2) nanomaterials, such as nanocrystals (hexagonal-phase NaLnF₄ and perovskite) and 2D nanosheets (Ca₂ Ta₃ O₁₀ and MoS₂ ). Finally, the challenges and limitations are highlighted, and some possible solutions to facilitate the developments of advanced luminescent materials are provided.

Recent review of BixMOy (M=V, Mo, W) for photocatalytic CO2 reduction into solar fuels

The utilization of solar energy for CO₂ conversion not only enables a green and low-carbon recycling of CO₂ with renewable energy, but also solves ecological problems. Bi_xMO_y (M = V, Mo, W) materials have typical layered structures and unique electronic properties that provide suitable band gaps and potential to meet the basic conditions for CO₂ reduction. However, pristine Bi_xMO_y faces with problems such as small specific surface area, insufficient active sites, low charge carriers' separation and utilization efficiency. This review comprehensively described the basic principles and reaction pathways of photocatalytic CO₂ reduction, and further presented the research progress of Bi_xMO_y catalysts in CO₂ conversion reactions. In this perspective, we further focus on the design concepts and modification strategies to improve the photocatalytic CO₂ reduction activity of Bi_xMO_y, such as morphology control, constructing surface vacancies and heterojunction fabrication. Finally, based on representative researches, the present review will be expected to provide updated information and insights for developing advanced Bi_xMO_y materials to further improve CO₂ reduction activity and selectivity.

Encapsulated CdSe/CdS nanorods in double-shelled porous nanocomposites for efficient photocatalytic CO2 reduction

Colloidal quantum dots have been emerging as promising photocatalysts to convert CO₂ into fuels by using solar energy. However, the above photocatalysts usually suffer from low CO₂ adsorption capacity because of their nonporous structures, which principally reduces their catalytic efficiency. Here, we show that synchronizing imine polycondensation reaction to self-assembly of colloidal CdSe/CdS nanorods can produce micro-meso hierarchically porous nanocomposites with double-shelled nanocomposites. Owing to their hierarchical pores and the ability to separate photoexcited electrons, the self-assembled porous nanocomposites exhibit remarkably higher activity (≈ 64.6 μmol g⁻¹ h⁻¹) toward CO₂ to CO in solid-gas regime than that of nonporous solids from self-assembled CdSe/CdS nanorods under identical conditions. Importantly, the length of the nanorods is demonstrated to be crucial to correlate their ability to long-distance separation of photogenerated electrons and holes along their axial direction. Overall, this approach provides a rational strategy to optimize the CO₂ adsorption and conversion by integrating the inorganic and organic semiconductors.

The authors design double shelled hollow superstructures from self-assembled CdSe/CdS nanorods in covalent organic frameworks for CO2 photo-reduction at a gas/solid interface.

Chloride-ion-directed synthesis of plate-like Cu2O mesocrystals for effective nitrogen fixation

Cuprous oxide (Cu₂O) mesocrystals, which are composed of numerous nanocrystals with a common crystallographic orientation, are supposed to possess superior photocatalytic abilities than the normal constructions, but very few of them have been reported to date. In this work, plate-like Cu₂O mesocrystals were successfully fabricated via a facile one-pot wet chemical strategy. Unlike the commonly used polymers or small molecules, chloride ions (Cl^-) were employed as structure-directing agents and played the main role in the Cu₂O mesocrystal formation. The formation mechanism was interpreted as follows: the presence of Cl^- inhibited the formation of CuO and Cu by forming the intermediate product CuCl, which was further hydrolyzed to Cu₂O nanocrystals. Cl^- tended to adsorb on the (111) facets of the formed Cu₂O nanocrystals and stabilize them. Then the Cu₂O nanocrystals were aligned side by side through the unabsorbed side faces, leading to mutual nanocrystals orientation and crystallographic lock-in, facilitating the formation of plate-like Cu₂O mesocrystals. The polymer, polyacrylamide (PAM), also promoted the mesocrystals formation by serving as a stabilizer and fixed the crystallographic orientation of the Cu₂O nanocrystals during their orderly stacking process. The plate-like Cu₂O mesocrystals showed a long decay time and pronounced performance toward the visible-light-driven photocatalytic reduction of N₂ into NH₃. This research may stimulate in-depth investigations into the exploration of new synthetic methods for the design and construction of novel mesocrystals.

Photochemistry Journey to Multielectron and Multiproton Chemical Transformation

The odyssey of photochemistry is accompanied by the journey to manipulate "electrons" and "protons" in time, in space, and in energy. Over the past decades, single-electron (1e^-) photochemical transformations have brought marvelous achievements. However, as each photon absorption typically generates only one exciton pair, it is exponentially challenging to accomplish multielectron and proton photochemical transformations. The multistep differences in thermodynamics and kinetics urgently require us to optimize light harvesting, expedite consecutive electron transfer, manipulate the interaction of catalysts with substrates, and coordinate proton transfer kinetics to furnish selective bond formations. Tandem catalysis enables orchestrating different photochemical events and catalytic transformations from subpicoseconds to seconds, which facilitates multielectron redox chemistries and brings consecutive, value-added reactivities. Joint efforts in molecular and material design, mechanistic understanding, and theoretical modeling will bring multielectron and proton synthetic opportunities for fuels, fertilizers, and chemicals with enhanced versatility, efficiency, selectivity, and scalability, thus taking better advantage of photons (i.e., sunlight) for our sustainable society.

Efficient, Selective CO2 Photoreduction Enabled by Facet-Resolved Redox-Active Sites on Colloidal CdS Nanosheets

Advances in nanotechnology have enabled precise design of catalytic sites for CO₂ photoreduction, pushing product selectivity to near unity. However, activity of most nanostructured photocatalysts remains underwhelming due to fast recombination of photogenerated electron-hole pairs and sluggish hole transfer. To address these issues, we construct colloidal CdS nanosheets (NSs) with the large basal planes terminated by S^2- atomic layers as intrinsic photocatalysts (CdS-S^2- NSs). Experimental investigation reveals that the S^2- termination endows ultrathin CdS-S^2- NSs with facet-resolved redox-catalytic sites: oxidation occurs on S^2--terminated large basal facets and reduction happens on side facets. Such an allocation of redox sites not only promotes spatial separation of photoinduced electrons and holes but also facilitates balanced extraction of holes and electrons by shortening the hole diffusion distance along the (001) direction of the ultrathin NSs. Consequently, the CdS-S^2- NSs exhibit superb performance for photocatalytic CO₂-to-CO conversion, which was verified by the isotope-labeled experiments to be a record-breaking performance: a CO selectivity of 99%, a CO formation rate of 2.13 mol g^-1 h^-1, and an effective apparent quantum efficiency of 42.1% under the irradiation (340 to 450 nm) of a solar simulator (AM 1.5G). The breakthrough performance achieved in this work provides novel insights into the precise design of nanostructures for selective and efficient CO₂ photoreduction.

Approaches for Management and Valorization of Non-Homogeneous, Non-Recyclable Plastic Waste

The environmental accumulation of plastic wastes has become one of the most discussed topics in the scientific community. The development of new strategies to tackle this issue is of crucial importance, and different approaches are being investigated to effectively reduce plastic waste generated by improper or inefficient disposal. In addition to the efforts addressing the development of biodegradable plastics, the research is currently focused on the development of innovative recycling approaches. Indeed, although most plastic materials are potentially recyclable, only 15% of the worldwide plastic waste is currently recycled, while the remaining 85% is usually incinerated to recover thermal energy or landfilled. The hurdles to efficient recycling come from improper management of end-of-life plastic goods. Moreover, the highly heterogeneous nature and versatility of plastic and polymeric materials have led to the development of multilayered materials, composites, blends and many other different species, whose management and/or reprocessing to yield high-value products is extremely challenging. Thus, although these materials are extremely valuable from an industrial point of view, they add a high degree of complexity to the recycling process because each one of them is different from the other, but they cannot be separated efficiently. The aim of the present review is to return a comprehensive overview of environmental and management issues related to the complex and heterogeneous mixture of plastic waste that is generated at the end of the sorting procedures in Italian plastic recycling plants, the so-called 'Plasmix'. This review lists the difficulties and limitations related to the management of non-recyclable Plasmix and highlights the strategies for the proper, sustainable and valuable use of this plastic waste.

Hybrid Metal-Organic Frameworks Encapsulated Hybrid Ni-Doped CdS Nanoparticles for Visible-Light-Driven CO2 Reduction

The photocatalytic production of syngas from CO₂ and water is an attractive and straightforward way for both solar energy storage and sustainable development. Here, we combined the hybrid shell of a bimetallic metal-organic framework (MOF) Zn/Co-zeolitic imidazolate framework (ZIF) and the hybrid photoactive center of Ni-doped CdS nanoparticles (Ni@CdS) to construct a new "2 + 2" photocatalysis system Ni@CdS⊂Zn/Co-ZIF through a facile self-assembly process, which exhibited a double-synergic effect for visible light harvesting and CO₂ conversion, leading to one of the highest photocatalytic syngas production rates and excellent recyclability. The H₂/CO of syngas ratios can be readily adjusted by controlling the ratio of Zn/Co in the hybrid MOF shell.