Nanopore-Supported Metal Nanocatalysts for Efficient Hydrogen Generation from Liquid-Phase Chemical Hydrogen Storage Materials

Transition metal-doped cobalt phosphide for efficient hydrazine oxidation: a density functional theory study

Hydrazine oxidation reaction (HzOR) provides a sustainable alternative to the sluggish oxygen evolution reaction (OER), with a low theoretical thermodynamic potential (-0.33 V vs. RHE). However, developing efficient non-precious-metal catalysts for HzOR remains challenging. Here, we employed density functional theory (DFT) simulations to systematically investigate the mechanism of transition metal atoms doping (Au, Cr, Fe, Mn, Mo, Ni, Pd, Pt) to boost the N-H bond cleavage in HzOR. Among the studied dopants, Cr and Mn exhibit exceptional catalytic activity, achieving ultralow ΔG for RDS of -0.02 eV (CoP-Cr) and 0.02 eV (CoP-Mn), significantly lower than the high-coordination cobalt sites on undoped CoP (0.11 eV). CoP-Cr aligns with descriptor-driven optimization, while CoP-Mn operates via dopant-induced charge redistribution. Furthermore, we identified the adsorption free energy of N-NH2 (ΔGad-N2H2-1) as a robust descriptor for catalytic activity in the reaction pathway involving distal configuration, showing strong correlations with ΔG of RDS. This work proposed a dual design strategy-descriptor-driven optimization (CoP-Cr) and charge-redistribution enhancement (CoP-Mn)-as a roadmap for developing earth-abundant, high-performance catalysts. These insights pave the way for advancing sustainable hydrogen production and environmental remediation technologies.

Selective Transformation of Biomass and the Derivatives for Aryl Compounds and Hydrogen via Visible-Light-Induced Radicals

ConspectusFor sustainable development, exploring renewable resources is an urgent priority. Nonfood biomass, one of the largest renewable resources on Earth, primarily comprises three key components: lignin (ca. 15-30%), cellulose (ca. 35-50%), and hemicellulose (ca. 20-30%). Theoretically, nonfood biomass can be converted into green chemicals and energy. However, most studies have focused on the generation of chemicals and carbon-based energy under harsh conditions, often resulting in lower selectivities. Therefore, further efforts to explore efficient and selective methods for producing chemicals and hydrogen (H2) are essential to promoting the practical applications of renewable biomass. In this Account, we summarize our contributions to the efficient and selective transformation of biomass and its derivatives into aryl compounds and H2. These transformations were achieved using visible-light-induced photocatalytic systems that generate active radicals to selectively cleave C-C, C-O, C-H, and O-H bonds under mild conditions, without using noble metals. First, aryl compound production was achieved by chemoselective cleavage of C-C and C-O bonds using aryl carboxyl radicals and aryl ether radical cations. Specifically, the aryl carboxyl radical in the charge-transfer complex induced the chemoselective cleavage of C-C bonds of aryl carboxylic acids, which are platform molecules derived from lignin oxidation; the aryl carboxyl radical in free form facilitated the chemoselective cleavage of C-O bonds in the model of the 4-O-5 lignin linkage. Moreover, arenols and aryl alcohols were obtained via cooperation of the aryl ether radical cation and the vanadate-induced chemoselective cleavage of the C-O bonds of the models of various lignin linkages. Second, we developed a streamlined strategy for H2 production from biomass using a one-pot, two-step route with formic acid (HCO2H) as an intermediate for H2 storage by thermocatalysis. Using this strategy by photoredox catalysis, HCO2H was initially obtained via the alkoxy radical-induced gradual cleavage of C-C bonds in cellulose, hemicellulose, glucose, and their derivatives. Subsequently, efficient H2 production from biomass-based HCO2H was realized via hydroxyl radical (·OH)-induced C-H and the following cleavage of the O-H bonds, with cooperation of the nickel catalysis. Third, the highest H2 production capability from biomass was achieved via efficient water reforming. This process utilized alkoxy radicals followed by generated carbon cations via electrocatalysis, inducing a well-organized cleavage of C-C, O-H, and C-H bonds. We anticipate that these insights will inspire the development of more efficient, stable, and cost-effective catalytic systems, accelerating the utilization of biomass as a renewable resource and driving other related significant transformations.

Photocatalytic Glucose Reforming for Formic Acid on 2D Amorphous MoO3-x/TNTs Heterojunction in Pure Water

Formic acid is a promising hydrogen-storage material and biohydrogen production intermediate, offering sustainable biomass-derived alternative processes. Herein, a 2D amorphous molybdenum oxide/titanium oxide nanotubes (MoO3-x/TNTs) heterojunction with amorphous/crystalline interfaces is designed and fabricated by supercritical CO2, with which the photocatalytic reforming of glucose for formic acid is realized in pure water. The HCOOH yields 14.8% for glucose and 22% for glycerol, are achieved in pure water at room temperature with 2 bars O2 atmosphere within 6 h under 365 nm light with 5 mW cm-2. The photoinduced Mo6+-catalyzed ligand-to-metal charge transfer and the enhanced adsorption energy of glucose molecules on the MoO3-x surface in the MoO3-x/TNTs heterojunction facilitate the cleavage of CC bonds in polyhydric alcohol skeletons, leading to the formation of HCOOH. Under light excitation, MoO3-x transfers electrons to TNTs due to the defect state, synergizing with the generated •OH radicals in the system. This results in reversible cycling between Mo6+ and Mo5+, thereby ensuring catalytic persistence. Therefore, this study demonstrates a photocatalytic strategy for the sustainable production of value-added chemicals from biomass under eco-friendly conditions, using easily recyclable heterogeneous catalysts in pure water.

Recent advances in nanoporous organic polymers (NPOPs) for hydrogen storage applications

Nanoporous organic polymers (NPOPs) have emerged as versatile materials with robust thermal stability, large surface area (up to 2500 m2 g-1), and customizable porosity, making them ideal candidates for advanced hydrogen (H2) storage applications. This review provides a comprehensive analysis of various NPOPs, including covalent organic frameworks (COFs), hypercrosslinked polymers (HCLPs), conjugated microporous polymers (CMPs), and porous aromatic frameworks (POAFs). Notably, these materials demonstrate superior H2 storage capacities, achieving up to 10 wt% at cryogenic temperatures, which is essential for applying H2 as a clean energy carrier. The review also highlights recent advancements, such as integrating metal-organic frameworks (MOFs) into NPOPs, further enhancing storage capacities by up to 30%. Their multifaceted properties underpin various applications, from fuel storage and gas separation to water treatment and optical devices. This review explores the significance and versatility of NPOPs in H2 storage due to their unique properties and enhanced storage capacities. Additionally, recent advancements in utilizing NPOPs for H2 storage are highlighted with a detailed discussion of emerging trends and the synthesis of innovative NPOPs. The review concludes with a discussion of the advantages, applications, challenges, research, and future directions for research in this area.

Rapid Hydrolysis of Submicron Magnesium Catalyzed by In Situ-Generated Multi-Nickel Alloys

The hydrolysis of lightweight metal-based materials is a promising technology for supplying hydrogen to portable fuel cells. Various additives for the catalytic modification of Mg hydrolysis have been investigated. Efficient catalysts and small magnesium particle sizes are key to enhancing the rate of hydrogen production. In this study, submicron Mg and in situ-generated multi-Ni alloy catalysts (NiM@Gn) are prepared and composited for the first time. Among the composites prepared, Mg-5 wt.%NiM@Gn exhibits the best hydrolysis performance. This composite can release 804.4 mL g-1 hydrogen within 30 s (98.32% of the total yield), and its initial hydrogen release rate is as high as 5480 mL g-1 min-1, with a low apparent activation energy of hydrolysis of 10.85 kJ mol-1. Submicron Mg greatly improves the rate of the hydrolysis reaction, and graphene facilitates the exfoliation of agglomerated Mg particles in water. Mg2Ni and (Fe, Ni) alloys generate microgalvanic cells with Mg in situ, significantly enhancing the electrochemical corrosion efficiency of Mg. Theoretical calculations show that these alloys accelerate electron transfer and coupling on the Mg surface. This study guides for the design and preparation of multi-catalysts and establishes the feasibility of submicron Mg for hydrogen generation through hydrolysis.

CO2-Mediated Hydrogen Energy Release-Storage Enabled by High-Dispersion Gold-Palladium Alloy Nanodots

Developing and fabricating a heterogeneous catalyst for efficient formic acid (FA) dehydrogenation coupled with CO2 hydrogenation back to FA is a promising approach to constructing a complete CO2-mediated hydrogen release-storage system, which remains challenging. Herein, a facile two-step strategy involving high-temperature pyrolysis and wet chemical reduction processes can synthesize efficient pyridinic-nitrogen-modified carbon-loaded gold-palladium alloy nanodots (AuPd alloy NDs). These NDs exhibit a prominent electron synergistic effect between Au and Pd components and tunable alloy-support interactions. The pyridinic-N dosage in carbon substrate improves the surface electron density of the alloy catalyst, thus regulating the chemical adsorption of FA molecules. Specifically, the engineered Au3Pd7/CN0.25 demonstrates an outstanding room-temperature FA dehydrogenation efficiency, achieving ≈100% conversion and an initial turnover frequency (TOF) of up to 9049 h-1. The versatile AuPd alloy NDs also show the ability to convert CO2, one of the products of FA dehydrogenation, into FA (formate) with a 90.8% yield under mild conditions. Moreover, in-depth insights into the unique alloyed microstructure, structure-activity relationship, key intermediates, and the alloy-driven five-step reaction mechanism involving the rate-determining step of C─H bond cleavage from critical *HCOO species via D-labeled isotope, in situ infrared spectroscopy, and theoretical calculations are investigated.

Phase Engineering of Zirconia Support Promotes the Catalytic Dehydrogenation of Formic Acid by Pd Active Sites

The development of Pd-based catalysts with outstanding activity and stability can further promote the hydrogen storage application of formic acid (FA). Regulating the support structure is an effective strategy for enhancing active sites in heterogeneous catalytic systems. This study prepared three types of nanosized ZrO2 through phase engineering to support Pd metal and investigated the implications of support structure on the microenvironment of active sites, thus revealing the structure-activity relationship of the catalysts. The hollow nanoframes like Pd/ZrO2-F with a moderate t-ZrO2 content exhibit remarkable stability and catalytic performance with a TOF of 1348 h-1 at an ambient temperature. Density functional theory (DFT) calculations verify that the crystal phase of ZrO2 can dramatically affect the metal-support interaction and change the Pd electronic state. Moreover, the dehydrogenation energy profiles reveal the synergy effect between ZrO2 phases on Pd active sites in the reaction. Pd/m-ZrO2 is more conducive to the dissociation of FA, and Pd/t-ZrO2 has energy advantages in hydrogen recombination. This work provides a new perspective for understanding the synergistic effect of the zirconia crystal phase on formic acid dehydrogenation by Pd active sites.

Spatially Confined Alloying of Pt Accelerates Mass Transport for Fuel Cell Oxygen Reduction

Pt-based alloy with high mass activity and durability is highly desired for proton exchange membrane fuel cells, yet a great challenge remains due to the high mass transport resistance near catalysts with lowering Pt loading. Herein, an extensible approach employing atomic layer deposition to accurately introduce a gas-phase metal precursor into platinum nanoparticles (NPs) pre-filled mesoporous channels is reported, achieved by controlling both the deposition site and quantity. Following the spatially confined alloying treatment, the prepared PtSn alloy catalyst within mesopores demonstrates a small size and homogeneous distribution (2.10 ± 0.53 nm). The membrane electrode assembly with mesoporous carbon-supported PtSn alloy catalyst achieves a high initial mass activity of 0.85 Amg Pt - 1 ${\mathrm{mg}}_{\mathrm{Pt}}^{-1}$ at 0.9 V, which is attributed to the smallest local oxygen transport resistance (3.68 S m-1) ever reported. The mass activity of the catalyst only decreases by 11% after 30000 cycles of accelerated durability test, representing superior full-cell durability among the reported Pt-based alloy catalysts. The enhanced activity and durability are attributed to the decreased adsorption energy of oxygen intermediates on Pt surface and the strong electronic interaction between Pt and Sn inhibiting Pt dissolution.

Cobalt Phosphide-Supported Single-Atom Pt Catalysts for Efficient and Stable Hydrogen Generation from Ammonia Borane Hydrolysis

Ammonia borane (AB) has emerged as a promising chemical hydrogen storage material. The development of efficient, stable, and cost-effective catalysts for AB hydrolysis is the key to achieving hydrogen energy economy. Here, cobalt phosphide (CoP) is used to anchor single-atom Pt species, acting as robust catalysts for hydrogen generation from AB hydrolysis. Thanks to the high Pt utilization and the synergy between CoP and Pt species, the optimized Pt/CoP-100 catalyst exhibits an unprecedented hydrogen generation rate, giving a record turnover frequency (TOF) value of 39911mo l H 2 mo l Pt - 1 mi n - 1 ${\mathrm{mo}}{{{\mathrm{l}}}_{{{{\mathrm{H}}}_{\mathrm{2}}}}}{\mathrm{\ mo}}{{{\mathrm{l}}}_{{\mathrm{Pt}}}}^{{\mathrm{ - 1}}}{\mathrm{\ mi}}{{{\mathrm{n}}}^{{\mathrm{ - 1}}}}$ and turnover number of 2926829mo l H 2 mo l Pt - 1 ${\mathrm{mo}}{{{\mathrm{l}}}_{{{{\mathrm{H}}}_{\mathrm{2}}}}}{\mathrm{\ mo}}{{{\mathrm{l}}}_{{\mathrm{Pt}}}}^{{\mathrm{ - 1}}}$ at room temperature. These metrics surpass those of all existing state-of-the-art supported metal catalysts by an order of magnitude. Density functional theory calculations reveal that the integration of single-atom Pt onto the CoP substrate significantly enhances adsorption and dissociation processes for both water and AB molecules, thereby facilitating hydrogen production from AB hydrolysis. Interestingly, the TOF value is further elevated to 54878mo l H 2 mo l Pt - 1 mi n - 1 ${\mathrm{mo}}{{{\mathrm{l}}}_{{{{\mathrm{H}}}_{\mathrm{2}}}}}{\mathrm{\ mo}}{{{\mathrm{l}}}_{{\mathrm{Pt}}}}^{{\mathrm{ - 1}}}{\mathrm{\ mi}}{{{\mathrm{n}}}^{{\mathrm{ - 1}}}}$ under UV-vis light irradiation, which can be attributed to the efficient separation and mobility of photogenerated carriers at the Pt-CoP interface. The findings underscore the effectiveness of CoP as a support for single-atom metals in hydrogen production, offering insights for designing high-performance catalysts for chemical hydrogen storage.

Integration of Single Atoms for Tandem Catalysis

Tandem catalysis represents an efficient pathway which greatly saves the overall facilities and energy inputs. The intermediates are transported from one active site to the other site more efficiently due to the ease of mass transfer in one reactor system. However, sometimes the indiscriminative usage of this concept can be misleading, and thereby, this Perspective first aims for differentiating "tandem catalysis" from liable-to-muddling concepts, such as "synergy" and "domino/cascade catalysis." The prerequisites for figuring out tandem catalysis mainly lie in (1) the two or more independent catalytic cycles involved in one system, where the products of one reaction cycle can be immediately relayed to a subsequent reaction cycle as the reactants, and (2) these cycles occurring in different catalytic mechanisms. As a frontier in heterogeneous catalysis, single-atom catalysts possess the unique property of high selectivity toward transformation of specific chemical bonds and can also bridge the homo- and heterogeneous catalysis. However, despite their wide range of applications, single-atom catalysts (SACs) are not solutions to all catalytic processes, particularly those reactions requiring active sites containing multiatoms in their proximity. To this end, the strategy of combining SACs within tandem processes is a feasible way to broaden the scope of chemical reactions achievable over SACs. Therein, according to the category of the participating active species, four subsections are thoroughly introduced, including tandem catalysis over the integration of (1) different/identical single atom(s), (2) single atoms and nanoparticles, and (3) single atoms and the adjacent support. Nonetheless, with regard to the investigation of the involved single-atom catalysts, some issues still remain regarding the exact characterization and explicit comparison of catalytic performance with that over their nanoparticle counterparts. Moreover, some intriguing subjects are still waiting to be systematically explored to broaden and deepen single-atom-integrated tandem processes in the branch of catalytic science.

Mechanochemistry Strategy in Metal/Fe3O4 with High Stability for Superior Chemoselective Catalysis

While noble metal nanoparticles (MNPs) exhibit remarkable performance in heterogeneous catalysis and their incorporation into crystalline materials can fully exploit the combined advantages of both, achieving introduction of nanoclusters during material crystallization, precisely controlling their interactions, and facilitating catalyst recovery remain significant challenges. In this study, Au NPs, Pt NPs, and Pd NPs are supported on magnetic Fe3O4, enabling the modulation of the electronic states of MNPs by adjusting the introduction method. Notably, the catalysts (Pt/Fe3O4, Au/Fe3O4, and Pd/Fe3O4) demonstrate excellent activity in chemoselective reactions: cinnamaldehyde (CAL) hydrogenation (turnover number: 20,135 h-1), nitrobenzene hydrogenation (with 99.9% selectivity for major nitrobenzene derivatives and robust stability at 19 cycles), and 3-nitrophenylacetylene (3-NPA) hydrogenation (yielding up to 98.4% 3-aminophenylacetylene (3-APA)), in stark contrast to the low activity of comparable catalysts. This paper proposes a novel and versatile solid-phase mechanochemistry strategy that achieves precise control over the microenvironment of MNPs while maintaining their inherent activity, thereby offering an effective approach to develop catalysts with high specificity and easy recovery capabilities.

Immobilization of Metal Nanoparticles to an Ultrathin Two-Dimensional Conjugated Metal-Organic Framework for Synergistic Electrocatalysis

Metal-organic frameworks (MOFs) have been considered as promising hosts for immobilizing ultrafine metal nanoparticles (MNPs) due to their high surface area and porosity. However, electrochemical applications of such emerging composites are severely limited by the poor electrical conductivity and large size of the MOFs. Herein, we report the general synthesis of incorporating various MNPs into a conjugated MOF ultrathin nanosheet (Cu-TCPP UNS) matrix, which not only prevents agglomeration and restricts the growth of MNPs but also benefits the exposure of active sites and the transport of electrons. Specifically, the obtained PtCu@Cu-TCPP UNSs exhibited nearly two times higher mass activity for the methanol oxidation reaction (MOR) than the commercial Pt/C catalyst. Mechanistic studies reveal that the strong interaction between MNPs and Cu-TCPP promotes the oxidation of the CO intermediate. Moreover, the PtCu@Cu-TCPP UNSs can be employed as bifunctional electrocatalysts to couple MOR with the hydrogen evolution reaction for highly efficient hydrogen production.

Highly Dispersed Pd-CeOx Nanoparticles in Zeolite Nanosheets for Efficient CO2-Mediated Hydrogen Storage and Release

Formic acid (FA) dehydrogenation and CO2 hydrogenation to FA/formate represent promising methodologies for the efficient and clean storage and release of hydrogen, forming a CO2-neutral energy cycle. Here, we report the synthesis of highly dispersed and stable bimetallic Pd-based nanoparticles, immobilized on self-pillared silicalite-1 (SP-S-1) zeolite nanosheets using an incipient wetness co-impregnation technique. Owing to the highly accessible active sites, effective mass transfer, exceptional hydrophilicity, and the synergistic effect of the bimetallic species, the optimized PdCe0.2/SP-S-1 catalyst demonstrated unparalleled catalytic performance in both FA dehydrogenation and CO2 hydrogenation to formate. Remarkably, it achieved a hydrogen generation rate of 5974 molH2 molPd -1 h-1 and a formate production rate of 536 molformate molPd -1 h-1 at 50 °C, surpassing most previously reported heterogeneous catalysts under similar conditions. Density functional theory calculations reveal that the interfacial effect between Pd and cerium oxide clusters substantially reduces the activation barriers for both reactions, thereby increasing the catalytic performance. Our research not only showcases a compelling application of zeolite nanosheet-supported bimetallic nanocatalysts in CO2-mediated hydrogen storage and release but also contributes valuable insights towards the development of safe, efficient, and sustainable hydrogen technologies.

Combination of nanoparticles with single-metal sites synergistically boosts co-catalyzed formic acid dehydrogenation

The development of hydrogen technologies is at the heart of a green economy. As prerequisite for implementation of hydrogen storage, active and stable catalysts for (de)hydrogenation reactions are needed. So far, the use of precious metals associated with expensive costs dominates in this area. Herein, we present a new class of lower-cost Co-based catalysts (Co-SAs/NPs@NC) in which highly distributed single-metal sites are synergistically combined with small defined nanoparticles allowing efficient formic acid dehydrogenation. The optimal material with atomically dispersed CoN2C2 units and encapsulated 7-8 nm nanoparticles achieves an excellent gas yield of 1403.8 mL·g-1·h-1 using propylene carbonate as solvent, with no activity loss after 5 cycles, which is 15 times higher than that of the commercial Pd/C. In situ analytic experiments show that Co-SAs/NPs@NC enhances the adsorption and activation of the key intermediate monodentate HCOO*, thereby facilitating the following C-H bond breaking, compared to related single metal atom and nanoparticle catalysts. Theoretical calculations show that the integration of cobalt nanoparticles elevates the d-band center of the Co single atoms as the active center, which consequently enhances the coupling of the carbonyl O of the HCOO* intermediate to the Co centers, thereby lowering the energy barrier.

Recent Advances in Reversible Liquid Organic Hydrogen Carrier Systems: From Hydrogen Carriers to Catalysts

Liquid organic hydrogen carriers (LOHCs) have gained significant attention for large-scale hydrogen storage due to their remarkable gravimetric hydrogen storage capacity (HSC) and compatibility with existing oil and gas transportation networks for long-distance transport. However, the practical application of reversible LOHC systems has been constrained by the intrinsic thermodynamic properties of hydrogen carriers and the performances of associated catalysts in the (de)hydrogenation cycles. To overcome these challenges, thermodynamically favored carriers, high-performance catalysts, and catalytic procedures need to be developed. Here, significant advances in recent years have been summarized, primarily centered on regular LOHC systems catalyzed by homogeneous and heterogeneous catalysts, including dehydrogenative aromatization of cycloalkanes to arenes and N-heterocyclics to N-heteroarenes, as well as reverse hydrogenation processes. Furthermore, with the development of metal complexes for dehydrogenative coupling, a new family of reversible LOHC systems based on alcohols is described that can release H2 under relatively mild conditions. Finally, views on the next steps and challenges in the field of LOHC technology are provided, emphasizing new resources for low-cost hydrogen carriers, high-performance catalysts, catalytic technologies, and application scenarios.

Two-dimensional molybdenum boride coordinating with ruthenium nanoparticles to boost hydrogen generation from hydrolytic dehydrogenation of ammonia borane

The coordination between carrier and active metal is critical to the catalytic efficiency of ammonia borane (AB) hydrolysis reaction. In the present study, we report a new type of catalytic support based on molybdenum boride (MBene) MoAl1-xB and demonstrate that the effective combination of MoAl1-xB with Ru nanoparticles can realize the significantly enhanced performance for hydrogen generation. Owing to the efficient activation and dissociation of reactants, the optimal Ru/MoAl1-xB catalyst achieves the large turnover frequency of 494 molH2 molRu-1 min-1, high hydrogen generation rate of 119817 mL min-1 gRu-1 and favorable apparent activation energy of 39.2 kJ mol-1 for the catalytic hydrolysis of AB under alkaline-free condition. The isotopic test suggests the cleavage of OH bond in H2O is the rate-determining step for hydrolysis reaction, while the fracture of B-H bond in AB is also well revealed by attenuated total reflectance (ATR)-Fourier transform infrared (FTIR) spectroscopy. Significantly, the flexible on-demand hydrogen generation is achieved by using chemical switches for on-off AB hydrolysis. This study provides a new support platform based on two-dimensional MBene to exploit efficient catalysts to boost AB dehydrogenation.

Exploring Nanomaterials for Hydrogen Storage: Advances, Challenges, and Perspectives

Hydrogen energy heralded for its environmentally friendly, renewable, efficient, and cost-effective attributes, stands poised as the primary alternative to fossil fuels in the future. Despite its great potential, the low volumetric density presents a formidable challenge in hydrogen storage. Addressing this challenge necessitates exploring effective storage techniques for a sustainable hydrogen economy. Solid-state hydrogen storage in nanomaterials (physically or chemically) holds promise for achieving large-scale hydrogen storage applications. Such approaches offer benefits, including safety, compactness, lightness, reversibility, and efficient generation of pure hydrogen fuel under mild conditions. This article presents solid-state nanomaterials, specifically nanoporous carbons (activated carbon, carbon fibers), metal-organic frameworks, covalently connected frameworks, nanoporous organic polymers, and nanoscale metal hydrides. Furthermore, new developments in hydrogen fuel cell technology for stationary and mobile applications have been demonstrated. The review outlines significant advancements thus far, identifies key barriers to practical implementation, and presents a perspective for future sustainable energy research. It concludes with recommendations to enhance hydrogen storage performance for cost-effective and long-lasting utilization.

Encapsulating Fe3O4 Nanoparticles and Carbon Dots in a Metal-Organic Framework for Magnetic Fluorescent Taggants

Magnetic fluorescent composite nanomaterials have broad application prospects in the fields of biological imaging, anticounterfeiting identification, suspicious object tracking, and identification of latent fingerprints in forensic medicine. For an effective taggant, a clearly visible identifying mark is necessary to enable observers to capture labeling information quickly and accurately, even from a distance. The preparation method of magnetic fluorescent composite materials is complicated and usually needs different surface modification and assembly processes. The limited loading capacity of fluorescent materials also limits the fluorescence properties of the composite, so it is difficult to produce obvious fluorescence as a taggant to meet the requirements of visible labeling. In this study, a core-shell structure of a magnetic fluorescent composite was prepared by using the metal-organic framework ZIF-8 as the host of fluorescent materials and an encapsulation shell coated on the Fe3O4 nanoparticles. The porous ZIF-8 is beneficial for increasing the loading capacity of fluorescent materials to ensure the fluorescence performance of the composite materials. Further modification of the composite surface prevented the desorption of fluorescent materials from the pores of ZIF-8, enabling the samples to maintain good fluorescence properties even after multiple washing cycles. The preparation method is simple, rapid, and cost-effective, and the prepared magnetic fluorescent composite nanomaterial has high magnetic separation performance and fluorescence performance, making it a promising material for identification, marking, and tracking.

Efficient Hydrogen Generation from Ammonia Borane Hydrolysis on a Tandem Ruthenium-Platinum-Titanium Catalyst

Hydrolysis of ammonia borane (NH3BH3, AB) involves multiple undefined steps and complex adsorption and activation, so single or dual sites are not enough to rapidly achieve the multi-step catalytic processes. Designing multi-site catalysts is necessary to enhance the catalytic performance of AB hydrolysis reactions but revealing the matching reaction mechanisms of AB hydrolysis is a great challenge. In this work, we propose to construct RuPt-Ti multi-site catalysts to clarify the multi-site tandem activation mechanism of AB hydrolysis. Experimental and theoretical studies reveal that the multi-site tandem mode can respectively promote the activation of NH3BH3 and H2O molecules on the Ru and Pt sites as well as facilitate the fast transfer of *H and the desorption of H2 on Ti sites at the same time. RuPt-Ti multi-site catalysts exhibit the highest turnover frequency (TOF) of 1293 min-1 for AB hydrolysis reaction, outperforming the single-site Ru, dual-site RuPt and Ru-Ti catalysts. This study proposes a multi-site tandem concept for accelerating the dehydrogenation of hydrogen storage material, aiming to contribute to the development of cleaner, low-carbon, and high-performance hydrogen production systems.

Hydrogen Production from Ammonia Decomposition: A Mini-Review of Metal Oxide-Based Catalysts

Efficient hydrogen storage and transportation are crucial for the sustainable development of human society. Ammonia, with a hydrogen storage density of up to 17.6 wt%, is considered an ideal energy carrier for large-scale hydrogen storage and has great potential for development and application in the "hydrogen economy". However, achieving ammonia decomposition to hydrogen under mild conditions is challenging, and therefore, the development of suitable catalysts is essential. Metal oxide-based catalysts are commonly used in the industry. This paper presents a comprehensive review of single and composite metal oxide catalysts for ammonia decomposition catalysis. The focus is on analyzing the conformational relationships and interactions between metal oxide carriers and active metal sites. The aim is to develop new and efficient metal oxide-based catalysts for large-scale green ammonia decomposition.

Recent progress in energy-saving electrocatalytic hydrogen production via regulating the anodic oxidation reaction

Hydrogen energy with its advantages of high calorific value, renewable nature, and zero carbon emissions is considered an ideal candidate for clean energy in the future. The electrochemical decomposition of water, powered by renewable and clean energy sources, presents a sustainable and environmentally friendly approach to hydrogen production. However, the traditional electrochemical overall water-splitting reaction (OWSR) is limited by the anodic oxygen evolution reaction (OER) with sluggish kinetics. Although important advances have been made in efficient OER catalysts, the theoretical thermodynamic difficulty predetermines the inevitable large potential (1.23 V vs. RHE for the OER) and high energy consumption for the conventional water electrolysis to obtain H2. Besides, the generation of reactive oxygen species at high oxidation potentials can lead to equipment degradation and increase maintenance costs. Therefore, to address these challenges, thermodynamically favorable anodic oxidation reactions with lower oxidation potentials than the OER are used to couple with the cathodic hydrogen evolution reaction (HER) to construct new coupling hydrogen production systems. Meanwhile, a series of robust catalysts applied in these new coupled systems are exploited to improve the energy conversion efficiency of hydrogen production. Besides, the electrochemical neutralization energy (ENE) of the asymmetric electrolytes with a pH gradient can further promote the decrease in application voltage and energy consumption for hydrogen production. In this review, we aim to provide an overview of the advancements in electrochemical hydrogen production strategies with low energy consumption, including (1) the traditional electrochemical overall water splitting reaction (OWSR, HER-OER); (2) the small molecule sacrificial agent oxidation reaction (SAOR) and (3) the electrochemical oxidation synthesis reaction (EOSR) coupling with the HER (HER-SAOR, HER-EOSR), respectively; (4) regulating the pH gradient of the cathodic and anodic electrolytes. The operating principle, advantages, and the latest progress of these hydrogen production systems are analyzed in detail. In particular, the recent progress in the catalytic materials applied to these coupled systems and the corresponding catalytic mechanism are further discussed. Furthermore, we also provide a perspective on the potential challenges and future directions to foster advancements in electrocatalytic green sustainable hydrogen production.

Advances and Prospects of Nanomaterials for Solid-State Hydrogen Storage

Hydrogen energy, known for its high energy density, environmental friendliness, and renewability, stands out as a promising alternative to fossil fuels. However, its broader application is limited by the challenge of efficient and safe storage. In this context, solid-state hydrogen storage using nanomaterials has emerged as a viable solution to the drawbacks of traditional storage methods. This comprehensive review delves into the recent advancements in nanomaterials for solid-state hydrogen storage, elucidating the fundamental principles and mechanisms, highlighting significant material systems, and exploring the strategies of surface and interface engineering alongside catalytic enhancement. We also address the primary challenges and provide future perspectives on the development of nanomaterial-based hydrogen storage technologies. Key discussions include the role of nanomaterial size effects, surface modifications, nanocomposites, and nanocatalysts in optimizing storage performance.

Ultrafine Ni-MoOx Nanoparticles Anchored on Nitrogen-Doped Carbon Nanosheets: A Highly Efficient Noble-Metal-Free Catalyst for Ammonia Borane Hydrolysis

The development of low-cost and high-efficiency catalysts for the hydrolytic dehydrogenation of ammonia borane (AB, NH3BH3) is still a challenging technology. Herein, ultrafine MoOx-doped Ni nanoparticles (~3.0 nm) were anchored on g-C3N4@glucose-derived nitrogen-doped carbon nanosheets via a phosphate-mediated method. The strong adsorption of phosphate-mediated nitrogen-doped carbon nanosheets (PNCS) for metal ions is a key factor for the preparation of ultrasmall Ni nanoparticles (NPs). Notably, the alkaline environment formed by the reduction of metal ions removes the phosphate from the PNCS surface to generate P-free (P)NCS so that the phosphate does not participate in the subsequent catalytic reaction. The synthesized Ni-MoOx/(P)NCS catalysts exhibited outstanding catalytic properties for the hydrolysis of AB, with a high turnover frequency (TOF) value of up to 85.7 min-1, comparable to the most efficient noble-metal-free catalysts and commercial Pt/C catalyst ever reported for catalytic hydrogen production from AB hydrolysis. The superior performance of Ni-MoOx/(P)NCS can be ascribed to its well-dispersed ultrafine metal NPs, abundant surface basic sites, and electron-rich nickel species induced by strong electronic interactions between Ni-MoOx and (P)NCS. The strategy of combining multiple modification measures adopted in this study provides new insights into the development of economical and high-efficiency noble-metal-free catalysts for energy catalysis applications.

Engineering a hollow bowl-like porous carbon-confined Ru-MgO hetero-structured nanopair as a high-performance catalyst for ammonia borane hydrolysis

Exploration of high-performance catalysts holds great importance for on-demand H2 production from ammonia borane (AB) hydrolysis. In this work, a hollow bowl-like porous carbon-anchored Ru-MgO hetero-structured nano-pair with high-intensity interfaces is made, using a tailored design approach. Consequently, the optimized catalyst shows AB hydrolysis activity with a turnover frequency value of 784 min-1 in aqueous media and 1971 min-1 in alkaline solvent. Robust durability is also achieved, with slight deactivation after a ten-cycle test. Combined experimental and theoretical calculations validate the positive function of the interface between Ru and MgO for facilitating H transfer and boosting water activation, thus leading to improved AB hydrolysis performance. This study could be valuable in guiding the upgradation of Ru catalytic systems, to advance their practical applications.

Exploring Enhanced Hydrolytic Dehydrogenation of Ammonia Borane with Porous Graphene-Supported Platinum Catalysts

Graphene is a good support for immobilizing catalysts, due to its large theoretical specific surface area and high electric conductivity. Solid chemical converted graphene, in a form with multiple layers, decreases the practical specific surface area. Building pores in graphene can increase specific surface area and provide anchor sites for catalysts. In this study, we have prepared porous graphene (PG) via the process of equilibrium precipitation followed by carbothermal reduction of ZnO. During the equilibrium precipitation process, hydrolyzed N,N-dimethylformamide sluggishly generates hydroxyl groups which transform Zn2+ into amorphous ZnO nanodots anchored on reduced graphene oxide. After carbothermal reduction of zinc oxide, micropores are formed in PG. When the Zn2+ feeding amount is 0.12 mmol, the average size of the Pt nanoparticles on PG in the catalyst is 7.25 nm. The resulting Pt/PG exhibited the highest turnover frequency of 511.6 min-1 for ammonia borane hydrolysis, which is 2.43 times that for Pt on graphene without the addition of Zn2+. Therefore, PG treated via equilibrium precipitation and subsequent carbothermal reduction can serve as an effective support for the catalytic hydrolysis of ammonia borane.

Confinement of CsPbBr3 Perovskite Nanocrystals into Extra-large-pore Zeolite for Efficient and Stable Photocatalytic Hydrogen Evolution

Metal halide perovskites (MHPs), renowned for their outstanding optoelectronic properties, hold significant promise as photocatalysts for hydrogen evolution reaction (HER). However, the low stability and insufficient exposure of catalytically active sites of bulky MHPs seriously impair their catalytic efficiency. Herein, we utilized an extra-large-pore zeolite ZEO-1 (JZO) as a host to confine and stabilize the CsPbBr3 nanocrystals (3.4 nm) for boosting hydrogen iodide (HI) splitting. The as-prepared CsPbBr3@ZEO-1 featured sufficiently exposed active sites, superior stability in acidic media, along with intrinsic extra-large pores of ZEO-1 that were favorable for molecule/ion adsorption and diffusion. Most importantly, the unique nanoconfinement effect of ZEO-1 led to the narrowing of the band gap of CsPbBr3, allowing for more efficient light utilization. As a result, the photocatalytic HER rate of the as-prepared CsPbBr3@ZEO-1 photocatalyst was increased to 1734 μmol ⋅ h-1 ⋅ g-1 (CsPbBr3) under visible light irradiation compared with bulk CsPbBr3 (11 μmol ⋅ h-1 ⋅ g-1 (CsPbBr3)), and the long-term durability (36 h) can be achieved. Furthermore, Pt was incorporated with well-dispersed CsPbBr3 nanocrystals into ZEO-1, resulting in a significant enhancement in activity (4826 μmol ⋅ h-1 ⋅ g-1 (CsPbBr3)), surpassing most of the Pt-integrated perovskite-based photocatalysts. Density functional theory (DFT) calculations and charge-carrier dynamics investigation revealed that the dramatically boosted photocatalytic performance of Pt/CsPbBr3@ZEO-1 could be attributed to the promotion of charge separation and transfer, as well as to the substantially lowered energy barrier for HER. This work highlights the advantage of extra-large-pore zeolites as the nanoscale platform to accommodate multiple photoactive components, opening up promising prospects in the design and exploitation of novel zeolite-confined photocatalysts for energy harvesting and storage.

Isomorphous Substitution of Organic Cage Crystal by Pd Nanoclusters for Selective Hydrogenation

For supporting active metal, the cavity confinement and mass transfer facilitation lie not in one sack, a trade-off between high activity and good stability of the catalyst is present. Porous organic cages (POCs) are expected to break the trade-off when metal particles are properly loaded. Herein, three organic cages (CC3, RCC3, and FT-RCC3) are employed to support Pd nanoclusters for catalytic hydrogenation. Subnanometer Pd clusters locate differently in different cage frameworks by using the same reverse double-solvents approach. Compared with those encapsulated in the intrinsic cavity of RCC3 and anchored on the outer surface of CC3, the Pd nanoclusters orderly assembled in FT-RCC3 crystal via isomorphous substitution exhibit superior activity, high selectivity, and good stability for semi-hydrogenation of phenylacetylene. Isomorphous substitution of FT-RCC3 crystal by Pd nanoclusters is originated from high crystallization capacity of FT-RCC3 and specific interaction of each Pd nanocluster with four cage windows. Both confinement function and H2 accumulation capacity of FT-RCC3 are fully utilized to support active Pd nanoclusters for efficient selective hydrogenation. The present results provide a new perspective to the heterogeneous catalysis field in terms of crystalizing metal nanoclusters in POC framework and outside the cage for making the best use of both parts.

Heterostructure CoS2/MoS2 Nanosheets as a Dual-Active Electrocatalyst for the Oxygen Evolution Reaction

Cost-effective and earth-abundant oxygen evolution reaction (OER) electrocatalysts are an incredible research hotspot in numerous energy storage and conversion technology fields. Herein, CoS2/MoS2 nanosheets supported by carbon cloth as a dual-active CC@CoS2/MoS2 heterostructure electrocatalyst is prepared through a simple solvothermal method. The catalyst demonstrates admirable OER performance in 1 M KOH solution with a low overpotential of 243 mV at a current density of 10 mA cm-2 and a minor Tafel slope of 109 mV dec-1, displaying honorable stability after 1000 cyclic voltammetry (CV) cycles and long-term robustness over 60 h. Theoretical calculations further ascertain that the rate-determining step of the electrocatalytic course of the CC@CoS2/MoS2 heterostructure is the conversion *O + OH- → *OOH + e- with a lower energy barrier of 1.49 eV due to the heterojunction established by CoS2 and MoS2, which can promote the OER performance of electrocatalysts. The actual identification of the catalytic mechanism in the heterostructure is conducive to the improvement of electrocatalysis applications in the OER.

Rare earth oxide based electrocatalysts: synthesis, properties and applications

As an important strategic resource, rare earths (REs) constitute 17 elements in the periodic table, namely 15 lanthanides (Ln) (La-Lu, atomic numbers from 57 to 71), scandium (Sc, atomic number 21) and yttrium (Y, atomic number 39). In the field of catalysis, the localization and incomplete filling of 4f electrons endow REs with unique physical and chemical properties, including rich electronic energy level structures, variable coordination numbers, etc., making them have great potential in electrocatalysis. Among various RE catalytic materials, rare earth oxide (REO)-based electrocatalysts exhibit excellent performances in electrocatalytic reactions due to their simple preparation process and strong structural variability. At the same time, the electronic orbital structure of REs exhibits excellent electron transfer ability, which can reduce the band gap and energy barrier values of rate-determining steps, further accelerating the electron transfer in the electrocatalytic reaction process; however, there is a lack of systematic review of recent advances in REO-based electrocatalysis. This review systematically summarizes the synthesis, properties and applications of REO-based nanocatalysts and discusses their applications in electrocatalysis in detail. It includes the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), hydrogen oxidation reaction (HOR), oxygen reduction reaction (ORR), carbon dioxide reduction reaction (CO2RR), methanol oxidation reaction (MOR), nitrogen reduction reaction (NRR) and other electrocatalytic reactions and further discusses the catalytic mechanism of REs in the above reactions. This review provides a timely and comprehensive summary of the current progress in the application of RE-based nanomaterials in electrocatalytic reactions and provides reasonable prospects for future electrocatalytic applications of REO-based materials.

Controllable Electrochemical Liberation of Hydrogen from Sodium Borohydride

Sodium borohydride (NaBH4 ) has earned recognition as a promising hydrogen carrier, attributed to its exceptional hydrogen storage capacity, boasting a high theoretical storage capacity of 10.8 wt %. Nonetheless, the utilization of traditional pyrolysis and hydrolysis methods still presents a formidable challenge in achieving controlled hydrogen generation especially under ambient conditions. In this work, we report an innovative electrochemical strategy for production H2 by coupling NaBH4 electrooxidation reaction (BOR) at anode in alkaline media with hydrogen evolution reaction (HER) at cathode in acidic media. To implement this, we have developed a bifunctional electrocatalyst denoted as Pd-Mo2 C@CNTs, wherein Pd nanoparticles are grown in situ on Mo2 C embedded within N-doped carbon nanotubes. This electrocatalyst demonstrates exceptional performance in catalyzing both alkaline BOR and acidic HER. We have developed a hybrid acid/alkali cell, utilizing Pd/Mo2 C@CNTs as the anode and cathode electrocatalysts. This configuration showcases remarkable capabilities for self-sustained, precise, and uninterrupted indirect release of H2 stored in NaBH4 , even at high current densities of 100 mA cm-2 with a Faraday efficiency approaching 100 %. Additionally, this electrochemical device exhibits significant promise as a fuel cell, with the ability to deliver a maximum power density of 20 mW cm-2 .

Review—Recent Progress in the Design of Chemical Hydrogen Sensors

The potential of hydrogen gas as a clean and renewable energy source has attracted considerable interest as a fuel for new energy vehicles. In order to guarantee the security and efficiency of these vehicles, the development of chemical hydrogen sensors has become essential. This paper offers a synopsis of the architecture of smart hydrogen detectors. It delves into the fundamentals, technical characteristics, and practical uses of these sensors. This review delves into a variety of hydrogen sensors, such as resistive sensors, electrochemical sensors, field-effect transistor (FET) sensors, and other sensors. This review provides researchers in the field of chemical sensor design with useful information about the current and future potential of hydrogen sensors.

Highly dispersed Pd-based pseudo-single atoms in zeolites for hydrogen generation and pollutant disposal

Atomically dispersed metal catalysts with excellent activity and stability are highly desired in heterogeneous catalysis. Herein, we synthesized zeolite-encaged Pd-based pseudo-single atoms via a facile and energy-efficient ligand-protected direct H2 reduction method. Cs-corrected scanning transmission electron microscopy, extended X-ray absorption, and pair distribution function measurements reveal that the metal species are close to atomic-level dispersion and completely confined within the intersectional channels of silicalite-1 (S-1) zeolite with the MFI framework. The Pd@S-1-H exhibits excellent activity and stability in methane combustion reactions with a complete combustion temperature of 390 °C, and no deactivation is observed even after 100 h on stream. The optimized bimetallic 0.8Pd0.2Ni(OH)2@S-1-H catalyst exhibits an excellent H2 generation rate from FA decomposition without any additives, affording a superhigh turnover frequency up to 9308 h-1 at 333 K, which represents the top activity among all of the best heterogeneous catalysts under similar conditions. Significantly, zeolite-encaged metal catalysts are first used for Cr(vi) reduction coupled with formic acid (FA) dehydrogenation and show a superhigh turnover number of 2980 mol(Cr2O72-) mol(Pd)-1 at 323 K, surpassing all of the previously reported catalysts. This work demonstrates that zeolite-encaged pseudo-single atom catalysts are promising in efficient hydrogen storage and pollutant disposal applications.

Mild Hydrogenation of 2-Furoic Acid by Pt Nanoparticles Dispersed in a Hierarchical ZSM-5 Zeolite

Hydrogenation of biobased compounds can add value to platform molecules obtained from biomass refining. Herein, we explore the hydrogenation of 2-furoic acid (2-furancarboxylic acid, FCA), a derivative of furfural, with H2 generated in situ by NaBH4 hydrolysis at ambient conditions. Nearly complete conversion of FCA was obtained with tetrahydrofuroic acid (THFA) and 5-hydroxyvaleric acid (5-HVA) as the only two reaction products over Pt nanoparticles supported on hierarchical ZSM-5. Small Pt nanoparticles (2 to 3 nm) were stabilized by ZSM-5 nanosheets. At an optimized Pt loading, the Pt nanoparticles can catalyze the hydrolysis of NaBH4 and the subsequent hydrogenation of FCA with the assistance of Brønsted acid sites. Nanostructuring ZSM-5 into nanosheets and its acidity contributes to the stability of the dispersed Pt nanoparticles. Deactivation due to NaBO2 deposition on the Pt particles can be countered by a simple washing treatment. Overall, this approach shows the promise of mild hydrogenation of biobased feedstock coupled with NaBH4 hydrolysis.

Modulating Electronic Metal-Support Interactions to Boost Visible-Light-Driven Hydrolysis of Ammonia Borane: Nickel-Platinum Nanoparticles Supported on Phosphorus-Doped Titania

Ammonia borane (AB) is a promising material for chemical H2 storage owing to its high H2 density (up to 19.6 wt %). However, the development of an efficient catalyst for driving H2 evolution through AB hydrolysis remains challenging. Therefore, a visible-light-driven strategy for generating H2 through AB hydrolysis was implemented in this study using Ni-Pt nanoparticles supported on phosphorus-doped TiO2 (Ni-Pt/P-TiO2 ) as photocatalysts. Through surface engineering, P-TiO2 was prepared by phytic-acid-assisted phosphorization and then employed as an ideal support for immobilizing Ni-Pt nanoparticles via a facile co-reduction strategy. Under visible-light irradiation at 283 K, Ni40 Pt60 /P-TiO2 exhibited improved recyclability and a high turnover frequency of 967.8 molH 2 ${{_{{\rm H}{_{2}}}}}$  molPt -1  min-1 . Characterization experiments and density functional theory calculations indicated that the enhanced performance of Ni40 Pt60 /P-TiO2 originated from a combination of the Ni-Pt alloying effect, the Mott-Schottky junction at the metal-semiconductor interface, and strong metal-support interactions. These findings not only underscore the benefits of utilizing multipronged effects to construct highly active AB-hydrolyzing catalysts, but also pave a path toward designing high-performance catalysts by surface engineering to modulate the electronic metal-support interactions for other visible-light-induced reactions.

Carbon-Doped Nickle Via a Fast Decarbonization Route for Enhanced Hydrogen Oxidation Reaction in Alkaline Media

Nickel (Ni) based materials with non-metal heteroatom doping are competitive substitutes for platinum group catalyst toward alkaline hydrogen oxidation reaction (HOR). However, the incorporation of non-metal atom into the lattice of conventional fcc phase Ni can easily trigger a structural phase transformation, forming hcp phase nonmetallic intermetallic compounds. Such tangle phenomenon makes it difficult to uncover the relationship between HOR catalytic activity and doping effect on fcc phase Ni. Herein, taking trace carbon doped Ni (C-Ni) nanoparticles as an example, a new nonmetal doped Ni nanoparticles synthesized by a simple fast decarbonization route using Ni3 C as precursor is presented, which provides an ideal platform to study the structure-activity relationship between alkaline HOR performance and non-metal doping effect toward fcc phase Ni. The obtained C-Ni exhibits an enhanced alkaline HOR catalytic activity compared with pure Ni, approaching to commercial Pt/C. X-ray absorption spectroscopy confirms that the trace carbon doping can modulate the electronic structure of conventional fcc phase nickel. Besides, theoretical calculations suggest that the introducing of C atoms can effectively regulate the d-band center of Ni atoms, resulting in the optimized hydrogen absorption, thereby improving the HOR activity.

Manganese-Based Immunostimulatory Metal-Organic Framework Activates the cGAS-STING Pathway for Cancer Metalloimmunotherapy

Metal-organic frameworks (MOFs) show tremendous promise for drug delivery due to their structural and functional versatility. However, MOFs are usually used as biologically inert carriers in most cases. The creation of intrinsically immunostimulatory MOFs remains challenging. In this study, a facile and green synthesis method is proposed for the preparation of a manganese ion (Mn2+)-based immunostimulatory MOF (ISAMn-MOF) for cancer metalloimmunotherapy. ISAMn-MOF significantly facilitates the activation of cyclic GMP-AMP synthase-stimulator of interferon genes (cGAS-STING) related genes and signaling pathways in bone-marrow-derived dendritic cells (BMDCs). BMDCs treated with ISAMn-MOF secrete 4-fold higher type I interferon and 2- to 16-fold higher proinflammatory cytokines than those treated with equivalent MnCl2. ISAMn-MOF alone or its combination with immune checkpoint antibodies significantly suppresses tumor growth and metastasis and prolongs mouse survival. Mechanistic studies indicate that ISAMn-MOF treatment facilitates the infiltration of stimulatory immune cells in tumors and lymphoid organs. This study provides insight into the design of bioactive MOFs for improved cancer metalloimmunotherapy.

Palladium-Phosphide-Modified Three-Dimensional Phospho-Doped Graphene Materials for Hydrogen Storage

The development of efficient hydrogen storage materials is crucial for advancing hydrogen-based energy systems. In this study, we prepared a highly innovative palladium-phosphide-modified P-doped graphene hydrogen storage material with a three-dimensional configuration (3D Pd₃P_0.95/P-rGO) using a hydrothermal method followed by calcination. This 3D network hindering the stacking of graphene sheets provided channels for hydrogen diffusion to improve the hydrogen adsorption kinetics. Importantly, the construction of the three-dimensional palladium-phosphide-modified P-doped graphene hydrogen storage material improved the hydrogen absorption kinetics and mass transfer process. Furthermore, while acknowledging the limitations of primitive graphene as a medium in hydrogen storage, this study addressed the need for improved graphene-based materials and highlighted the significance of our research in exploring three-dimensional configurations. The hydrogen absorption rate of the material increased obviously in the first 2 h compared with two-dimensional sheets of Pd₃P/P-rGO. Meanwhile, the corresponding 3D Pd₃P_0.95/P-rGO-500 sample, which was calcinated at 500 °C, achieved the optimal hydrogen storage capacity of 3.79 wt% at 298 K/4 MPa. According to molecular dynamics, the structure was thermodynamically stable, and the calculated adsorption energy of a single H₂ molecule was -0.59 eV/H₂, which was in the ideal range of hydrogen ad/desorption. These findings pave the way for the development of efficient hydrogen storage systems and advance the progress of hydrogen-based energy technologies.

Construction of a Novel Cascade Electrolysis-Heterocatalysis System by Using Zeolite-Encaged Ultrasmall Palladium Catalysts for H2 O2 Generation

In situ generation of hydrogen peroxide (H₂ O₂ ) has attracted extensive attention, especially in water treatment. However, traditional anthraquinones can only produce high-concentration H₂ O₂ and its transportation and storage are not convenient and dangerous. Herein, an in situ and on-demand strategy to produce H₂ O₂ by using a cascade water electrolysis together with a heterocatalysis system is provided. Beginning with water, H_2, and O₂ can be generated via electrolysis and then react with each other to produce H₂ O₂ immediately on efficient zeolite-encaged ultrasmall Pd catalysts. Significantly, the H₂ O₂ generation rate in the optimized cascade system reaches up to 0.85 mol L^-1 h^-1 g_Pd ^-1 , overcoming most of the state-of-the-art catalysts in previous literature. The confinement effect of zeolites is not only beneficial to the formation of highly dispersed metal species, promoting the H₂ O₂ generation, but also inhibits the H₂ O₂ decomposition, enhancing the production yield of H₂ O₂ . In addition, the effect of electrolytes, sizes of Pd species, as well as zeolite acidity are also systematically studied. This work provides a new avenue for H₂ O₂ generation via a highly efficient cascade electrolysis-heterocatalysis system by using zeolite-supported metal catalysts. The high catalytic efficiency and green process for H₂ O₂ generation make it very promising for further practical applications.

Carbon bowl-confined subnanometric palladium-gold clusters for formic acid dehydrogenation and hexavalent chromium reduction

Formic acid (FA), a high-value product of CO₂ hydrogenation and biomass conversion, is considered a promising liquid organic hydrogen carrier for its high hydrogen content, easy accessibility, and relative stability. The development of an efficient heterogeneous catalyst toward FA dehydrogenation and Cr(VI) reduction by FA is needed to boost its sluggish kinetics but still remains a challenge. Herein, uniformly dispersed subnanometric PdAu alloy clusters (i.e., 0.9 nm) were successfully prepared and confined by amine-functionalized carbon bowls (ACB). By virtue of the tiny size and abundant active sites of PdAu clusters, the promotional effect of surface amine groups, and electronic interaction between subnanometric PdAu clusters and support, this as-prepared PdAu/ACB catalyst exhibits superior catalytic property for additive-free FA dehydrogenation (turnover frequency, 10597 h^-1 at 323 K) and Cr(VI) reduction (rate constant, 0.47 min^-1 at 298 K) under mild conditions, higher than most of the catalysts reported so far. This study offers insight into the design of efficient and durable catalysts for various catalytic applications in energy and environment.

Hydrogen Production from Formic Acid by In Situ Generated Ni/CdS Photocatalytic System under Visible Light Irradiation

Simple and practical noble-metal-free catalyzed hydrogen production from sustainable resources, such as renewable formic acid, is highly desirable. Herein, the development of an efficient photocatalytic hydrogen production from aqueous solution of formic acid using in situ generated Ni/CdS photocatalytic system was described. CdS-Cys (Cys=l-cysteine) quantum dots (QDs) acting as photocatalyst with Ni(OAc)₂ as H₂ production catalyst precursor, a 94 % yield was obtained within 5 h under visible light irradiation at 50 °C. The average rate of H₂ production reached up to 282 μmol mg^-1  h^-1 with 99.8 % H₂ selectivity. Mechanistic studies indicate cooperation of dynamic quenching and static quenching of CdS-Cys QDs by Ni(OAc)₂ . Especially, Ni⁰ , generated in the dynamic quenching, accelerated the electron transfer by acting as an electron outlet and enhancing the stability of CdS to slow down the photocorrosion distinctly, delivering efficient H₂ production with high selectivity. Our study will inspire exploration of various efficient non-noble-metal catalysts for practical H₂ production from bio-based formic acid.

Recent Advances and Perspectives on Supported Catalysts for Heterogeneous Hydrogen Production from Ammonia Borane

Ammonia borane (AB), a liquid hydrogen storage material, has attracted increasing attention for hydrogen utilization because of its high hydrogen content. However, the slow kinetics of AB hydrolysis and the indefinite catalytic mechanism remain significant problems for its large-scale practical application. Thus, the development of efficient AB hydrolysis catalysts and the determination of their catalytic mechanisms are significant and urgent. A summary of the preparation process and structural characteristics of various supported catalysts is presented in this paper, including graphite, metal-organic frameworks (MOFs), metal oxides, carbon nitride (CN), molybdenum carbide (MoC), carbon nanotubes (CNTs), boron nitride (h-BN), zeolites, carbon dots (CDs), and metal carbide and nitride (MXene). In addition, the relationship between the electronic structure and catalytic performance is discussed to ascertain the actual active sites in the catalytic process. The mechanism of AB hydrolysis catalysis is systematically discussed, and possible catalytic paths are summarized to provide theoretical considerations for the designing of efficient AB hydrolysis catalysts. Furthermore, three methods for stimulating AB from dehydrogenation by-products and the design of possible hydrogen product-regeneration systems are summarized. Finally, the remaining challenges and future research directions for the effective development of AB catalysts are discussed.

Nickel -supported PdM (M = Au and Ag) nanodendrites as formate oxidation (electro)catalytic anodes for direct fuel cells and hydrogen generation at room temperature

The study provides a proof of concept for the first time that unique palladium-gold (PdAu) and palladium-silver (PdAg) nanodendrites are bifunctional catalytic active sites for formate oxidation reactions (FORs) and formate dehydrogenation reactions (FDRs). The unique nanodendritic structure was developed via a simple galvanic displacement reaction for the direct growth of PdAu and PdAg nanodendrites on a nickel foam (PdAu/NiNF and PdAg/NiNF). These PdAu/NiNF and PdAg/NiNF electrodes exhibited 2.32 and 1.59 times higher specific activity than that of the commercial Pd/C electrode and promising stability toward FORs. Moreover, the PdAu/NiNF and PdAg/NiNF nanodendrites were also highly active and selective catalysts for hydrogen generation from a formate solution with turnover frequency (TOF) values of 311 h^-1 and 287 h^-1 respectively. Impressively, a passive air-breathing formate fuel cell with PdAu/NiNF used as an anode can yield an open-circuit voltage of 1.12 V and a peak power density of 21.7 mW cm^-2, which outperforms most others reported in the literature. PdAu and PdAg nanodendritic catalysts supported on a nickel foam demonstrate an open structure and uniform catalyst distribution and offer a promising nanoalloy for air-breathing formate fuel cells and on-site chemical hydrogen production systems.

Heterostructural Ni-Ni0.2 Mo0.8 N Interface Engineering Boosts Alkaline Hydrogen Electrocatalysis

Exploring efficient and low-cost bifunctional catalysts for hydrogen evolution reaction (HER) and hydrogen oxidation reaction (HOR) is highly desirable for the achievement of unitized regenerative fuel cells. Herein, a facile method to prepare hetero-interfacial Ni-Ni_0.2 Mo_0.8 N nanosheets with tailored d-band for efficient alkaline hydrogen electrocatalysis is presented. Mechanism studies indicate that interface engineering can downshift the d-band center of Ni-Ni_0.2 Mo_0.8 N nanosheets due to the electron transfer from Ni to Ni_0.2 Mo_0.8 N, which weakens the binding strength of reaction intermediates, thereby boosting the catalytic performance. Relative to pure Ni, Ni-Ni_0.2 Mo_0.8 N nanosheets show a lower overpotential of 83 mV at -10 mA cm^-2 and good stability during 2,000 cycles for HER. Meanwhile, Ni-Ni_0.2 Mo_0.8 N nanosheets exhibit an improved exchange current density for HOR with a 10.2-fold enhancement in comparison with that of pure Ni. This work provides valuable insight into the reasonable design of efficient energy-related electrocatalysts based on the tailoring of d-band center by interface engineering.

Active site recovery and N-N bond breakage during hydrazine oxidation boosting the electrochemical hydrogen production

Substituting hydrazine oxidation reaction for oxygen evolution reaction can result in greatly reduced energy consumption for hydrogen production, however, the mechanism and the electrochemical utilization rate of hydrazine oxidation reaction remain ambiguous. Herein, a bimetallic and hetero-structured phosphide catalyst has been fabricated to catalyze both hydrazine oxidation and hydrogen evolution reactions, and a new reaction path of nitrogen-nitrogen single bond breakage has been proposed and confirmed in hydrazine oxidation reaction. The high electro-catalytic performance is attributed to the instantaneous recovery of metal phosphide active site by hydrazine and the lowered energy barrier, which enable the constructed electrolyzer using bimetallic phosphide catalyst at both sides to reach 500 mA cm^-2 for hydrogen production at 0.498 V, and offer an enhanced hydrazine electrochemical utilization rate of 93%. Such an electrolyzer can be powered by a bimetallic phosphide anode-equipped direct hydrazine fuel cell, achieving self-powered hydrogen production at a rate of 19.6 mol h^-1 m^-2.

"On-Off" Control for On-Demand H2 Release upon Dimethylamineborane Hydrolysis over Ru0.8Ni0.2/MoS2 Nanohybrids

In spite of the fact that remarkable developments are achieved in the design and development of novel nanocatalysts for H₂ release upon dimethylamineborane hydrolysis, the development of an "on-off" switch for demand-based H₂ evolution upon dimethylamineborane hydrolysis is still a matter of supreme importance, however. Herein, we synthesized a string of MoS₂ nanosheet-supported RuNi bimetallic nanohybrids (Ru_xNi_1-x/MoS₂), by fixation of RuNi nanoparticles at the MoS₂ surface, for the H₂ evolution upon the hydrolysis of dimethylamineborane at 30 °C. For safely and effectively generating, transporting, and storing H₂ gas, the selective "on-off" switch for on-demand H₂ evolution upon dimethylamineborane hydrolysis over the Ru_0.8Ni_0.2/MoS₂ nanohybrid has been successfully realized by the Zn²⁺/EDTA-2Na system. In particular, the H₂ evolution is totally switched off by adding Zn(NO₃)₂. It seems that Zn²⁺ ions are attached and anchored at the Ru_0.8Ni_0.2/MoS₂ surface, inhibiting their surface-active sites, leading to the termination of H₂ evolution. Then, the H₂ generation is subsequently reactivated by adding the EDTA-2Na solution because of its excellent coordination ability with Zn²⁺ ions. This study not only offers a new and efficient RuNi nanocatalyst for dimethylamineborane hydrolysis but also proposes a new method for the demand-based H₂ production.

Tuning Electron Transfer in Atomic-Scale Pt-Supported Catalysts for the Alkaline Hydrogen Oxidation Reaction

Developing efficient atomic-scale metal-supported catalysts is of great significance for energy conversion technologies. However, the precise modulation of electron transfer between the metal and supporter in atomic-scale metal-supported catalysts to further improve the catalytic activity is still a major challenge. Herein, we show tunable electron transfer between atomic-scale Pt and tungsten nitride/oxide supports (namely, Pt/WN and Pt/W₁₈O₄₉). Pt/WN with modest electron exchange and Pt/W₁₈O₄₉ with aggressive electron exchange exhibit notably different catalytic activities for the alkaline hydrogen oxidation reaction (HOR), in which Pt/WN shows a 5.7-fold enhancement in HOR intrinsic catalytic performance in comparison to Pt/W₁₈O₄₉. Additionally, the tunable electronic transfer at the interface of Pt/WN and Pt/W₁₈O₄₉, as proven by the theoretical calculation, resulted in the discrepancy of the adsorption free energy of the reaction intermediates, as well as catalytic activity, for the HOR process. Our work provides new insights into the design of advanced atomic-scale metal-supported catalysts for electrocatalysis.

Cobalt-Promoted Noble-Metal Catalysts for Efficient Hydrogen Generation from Ammonia Borane Hydrolysis

Ammonia borane (AB) has been regarded as a promising material for chemical hydrogen storage. However, the development of efficient, cost-effective, and stable catalysts for H₂ generation from AB hydrolysis remains a bottleneck for realizing its practical application. Herein, a step-by-step reduction strategy has been developed to synthesize a series of bimetallic species with small sizes and high dispersions onto various metal oxide supports. Superior to other non-noble metal species, the introduction of Co species can remarkably and universally promote the catalytic activity of various noble metals (e.g., Pt, Rh, Ru, and Pd) in AB hydrolysis reactions. The optimized Pt_0.1%Co_3%/TiO₂ catalyst exhibits a superhigh H₂ generation rate from AB hydrolysis, showing a turnover frequency (TOF) value of 2250 mol_H2 mol_Pt^-1 min^-1 at 298 K. Such a TOF value is about 10 and 15 times higher than that of the monometal Pt/TiO₂ and commercial Pt/C catalysts, respectively. The density functional theory (DFT) calculation reveals that the synergy between Pt and CoO species can remarkably promote the chemisorption and dissociation of water molecules, accelerating the H₂ evolution from AB hydrolysis. Significantly, the representative Pt_0.25%Co_3%/TiO₂ catalyst exhibits excellent stability, achieving a record-high turnover number of up to 215,236 at room temperature. The excellent catalytic performance, superior stability, and low cost of the designed catalysts create new prospects for their practical application in chemical hydrogen storage.

Second Sphere Effects Promote Formic Acid Dehydrogenation by a Single-Atom Gold Catalyst Supported on Amino-Substituted Graphdiyne

Regulating the second sphere of homogeneous molecular catalysts is a common and effective method to boost their catalytic activities, while the second sphere effects have rarely been investigated for heterogeneous single-atom catalysts primarily due to the synthetic challenge for installing functional groups in their second spheres. Benefiting from the well-defined and readily tailorable structure of graphdiyne (GDY), an Au single-atom catalyst on amino-substituted GDY is constructed, where the amino group is located in the second sphere of the Au center. The Au atoms on amino-decorated GDY displayed superior activity for formic acid dehydrogenation compared with those on unfunctionalized GDY. The experimental studies, particularly the proton inventory studies, and theoretical calculations revealed that the amino groups adjacent to an Au atom could serve as proton relays and thus facilitate the protonation of an intermediate Au-H to generate H₂ . Our study paves the way to precisely constructing the functional second sphere on single-atom catalysts.

Advancements in Basic Zeolites for Biodiesel Production via Transesterification

The excessive utilization of petroleum diesel has led to the depletion of fossil resources and severe environmental pollution. Biodiesel produced from renewable triglycerides (TGs) or waste lipids is a low-emission fuel substitute for diesel. Biodiesel is mainly produced by transesterification reactions over homogeneous base catalysts with excellent activity and low cost. In comparison, solid base catalysts are more attractive due to their lower environmental impact and simpler production and purification processes. It remains a challenge to further improve the stability and activity of solid base catalysts. Because of the high surface area, superior stability, and tunable basicity, basic zeolites, especially two-dimensional zeolites, have emerged as promising solid basic catalysts for the transesterification of TGs. In this review, we present recent advancements in the synthesis, characterization, and catalytic performance of basic zeolites for the transesterification of TGs. Challenges and development prospects of basic zeolites for biodiesel production via transesterification are also pointed out. We expect that this review will inspire the more efficient and rational design of zeolites for sustainable fuel production.

Ultrafine Pt nanoparticles anchored on core-shell structured zeolite-carbon for efficient catalysis of hydrogen generation

Ammonia borane (AB) is a potential hydrogen storage material with high-efficiency hydrolytic dehydrogenation under a suitable catalyst. Noble metal catalysts have drawn a lot of attention. In this study, a carbon-coated zeolite was obtained by calcination at high temperatures using glucose as a carbon source. Pt nanoparticles were fixed on a core-shell composite support by a simple chemical reduction method. A series of catalysts were prepared with different synthesis parameters. The results show that PSC-2 has excellent catalytic performance for hydrolytic dehydrogenation of AB in alkaline solution at room temperature, and the turnover frequency (TOF) is 593 min-1. The excellent catalytic performance is attributed to the carbon layer on the zeolite surface which inhibits the aggregation or deformation of metals in the catalytic reaction. The metal-support interaction activates the water and accelerates the rate-limiting step of hydrolysis. The activation energy (E a = 44 kJ mol-1) was calculated based on the reaction temperature. In addition, the kinetics of AB hydrolysis was studied, and the effects of catalyst concentration, AB concentration and NaOH concentration on AB hydrolysis rate were further investigated. The high-efficiency catalyst prepared in this work provides a new strategy for the development of chemical hydrogen production in the field of catalysis.