An Efficient Approach to Fabricate Air-Stable Perovskite Solar Cells via Addition of a Self-Polymerizing Ionic Liquid

Art of Cross-Linking In Situ Bulk Perovskites for Efficient and Stable Photovoltaics

Perovskites are hybrid materials containing templating organic linkers and inorganic halides with efficiencies that have superseded the efficiency of silicon-based photovoltaic devices (PVs) in a very short period of 10 years. Nevertheless, low ambient stability due to traps and ion migration caused hysteresis to remain the bottlenecks on the way to achieving higher operational stability with bulk perovskite-based PVs. In this context, herein we highlight the prospects of in situ cross-linking of linkers within the perovskite lattice either mediated by thermal means or attained photochemically that can maneuver the ambient as well as operational stability for enhanced power conversion efficiency for PV applications or could improve the conductivity of this hybrid semiconductor. Additionally, some important studies of additive engineering via in situ cross-linking that can affect the structure of perovskite in addition to defect passivation to endow ambient environment stability are highlighted herein.

Benzoic acid inhibits intrinsic ion migration for efficient and stable perovskite solar cells

An efficient perovskite solar cell (PSC) has the following characteristics: (1) large perovskite grain size; (2) small ion migration; (3) low defect density states. Here, benzoic acid was employed as an additive to a perovskite solution to improve the thin film quality. Surprisingly, 1.0%-BA can implement all of these features. Therefore, the power conversion efficiency (PCE) of the champion PSC is 18.05%, which is superior to that of the control device (15.42%). In addition, BA-doped PSC kept 86% of its primary PCE after 30 days (RH: 35%), but the control device only retained 75% under the same conditions. The improvement of its stability is because of the inhibition of the cation migration of perovskite by the addition of BA and the passivation of perovskite defects. The results can acquire a better understanding of the potential applications of small organic molecules in improving the PCE and stability of PSC devices.

A-D-A Molecule-Bridge Interface for Efficient Perovskite Solar Cells and Modules

As the photovoltaic field endeavors to transition perovskite solar cells (PSCs) to industrial applications, inverted PSCs, which incorporate fullerene as electron transport layers, have emerged as a compelling choice due to their augmented stability and cost-effectiveness. However, these attributes suffer from performance issues stemming from suboptimal electrical characteristics at the perovskite/fullerene interface. To surmount these hurdles, an interface bridging strategy (IBS) is proposed to attenuate the interface energy loss and enhance the interfacial stability by designing a series of A-D-A type perylene monoimide (PMI) derivatives with multifaceted advantages. In addition to passivating defects, the IBS plays a crucial role in facilitating the binding between perovskite and fullerene, thereby enhancing interface coupling and importantly, improving the formation of fullerene films. The PMI derivatives, functioning as bridges, serve as a protective barrier to enhance the device stability. Consequently, the IBS enables a remarkable efficiency of 24.62% for lab-scale PSCs and an efficiency of 18.73% for perovskite solar modules craft on 156 × 156 mm2 substrates. The obtained efficiencies represent some of the highest recorded for fullerene-based devices, showcasing significant progress in designing interfacial molecules at the perovskite/fullerene interface and offering a promising path to enhance the commercial viability of PSCs.

Strengthened Interficial Adhesive Fracture Energy by Young's Modulus Matching Degree Strategy in Carbon-Based HTM Free MAPbI3 Perovskite Solar Cell with Enhanced Mechanical Compatibility

Carbon-based hole transport layer-free perovskite solar cells (PSCs) based on methylammonium lead triiodide (MAPbI3 ) have become one of the research focus due to low cost, easy preparation, and good optoelectronic properties. However, instability of perovskite under vacancy defects and stress-strain makes it difficult to achieve high-efficiency and stable power output. Here, a soft-structured long-chain 2D pentanamine iodide (abbreviated as "PI") is used to improve perovskite quality and interfacial mechanical compatibility. PI containing CH3 (CH2 )4 NH3 + and I- ions not only passivate defects at grain boundaries, but also effectively alleviate residual stress during high temperature annealing via decreasing Young's modulus of perovskite film. Most importantly, PI effectively increases matching degree of Young's modulus between MAPbI3 (47.1 GPa) and carbon (6.7 GPa), and strengthens adhesive fracture energy (Gc ) between perovskite and carbon, which is helpful for outward release of nascent interfacial stress generated under service conditions. Consequently, photoelectric conversion efficiency (PCE) of optimal device is enhanced from 10.85% to 13.76% and operational stability is also significantly improved. 83.1% output is maintained after aging for 720 h at room temperature and 25-60% relative humidity (RH). This strategy of regulation from chemistry and physics provides a strategy for efficient and stable carbon-based PSCs.

Air-processed MAPbI3 perovskite solar cells achieve 20.87% efficiency and excellent bending resistance enabled via a polymer dual-passivation strategy

In recent years, air-processed MAPbI3 perovskite solar cells (PSCs) have attracted widespread interest from researchers worldwide because of their simple and low-cost fabrication process. Nonetheless, the ambient conditions usually bring about many adverse effects, such as imperfect crystallization and numerous defects in perovskite films, which seriously impact both the photoelectric performance and stability of the device. Therefore, in this work, a polymer dual-passivation strategy was employed by introducing ammonium polyphosphate (APP) as an additive to the green anti-solvent to accurately modify the perovskite layer. APP, which has abundant phosphate and ammonium groups, could simultaneously fill the I/Pb vacancies by Lewis acid-base reactions to restrain defect formation and improve the power conversion efficiency (PCE) of the ultimate device. On the other hand, the long molecular chains of the polymer with a certain flexural ability were easily congregated at the grain boundaries of the perovskite grains, thus enhancing the bending resistance. Consequently, high-quality perovskite films with a dense morphology and large grain size were obtained. Because of the reduced defect density and suppressed non-radiative recombination, the optimal PSC attained a champion PCE of 20.87% with negligible hysteresis. Furthermore, the non-encapsulated APP-modified flexible device also exhibited excellent bending resistance. Only 20% of its normalized PCE was lost after 150 bending cycles at room temperature. This simple, green, low-cost, and reliable strategy for preparing high-efficiency PSCs with good stability can facilitate its commercialization.

Break through the Steric Hindrance of Ionic Liquids with Carbon Quantum Dots to Achieve Efficient and Stable Perovskite Solar Cells

Overcoming the negative impact of residual ionic liquids (ILs) on perovskite films based on an in-depth understanding of chemical interactions between ionic liquids and preparing perovskite precursor solutions is a great challenge when aiming to simultaneously achieve long-term stability and high efficiency within IL-based perovskite solar cells (PSCs). Herein, 1-butyl-3-methylimidazolium tetrafluoroborate (BMIMBF4), a type of IL, was introduced into the perovskite precursor solution, and carbon quantum dots (CQDs) were further introduced into the antisolvent to enhance the photovoltaic properties of PSCs. Both ILs and CQDs synergistically manipulate the crystallization process and passivate defects to obtain high-quality perovskite films. Besides serving as passivation sites to strengthen the collaboration between additives and perovskite materials, the cointroduction of CQDs further promotes the carrier transport process since it not only provides carrier channels at grain boundaries but also forms better energy alignment, which effectively overcomes the charge transfer loss caused by the steric hindrance of ILs. Based on such a synergistic effect of ILs and CQDs, the n-i-p MAPbI3-based PSCs achieve the highest efficiency of 20.84% with improved stability. This simple and low-cost synergistic integration method will subsequently provide direction for optimizing ILs to improve the photovoltaic performance of PSCs.

Constructing Additives Synergy Strategy to Doctor-Blade Efficient CH3 NH3 PbI3 Perovskite Solar Cells under a Wide Range of Humidity from 45% to 82

Perovskite solar cells (PSCs) have emerged as one of the most promising and competitive photovoltaic technologies, and doctor-blading is a facile and robust deposition technique to efficiently fabricate PSCs in large scale, especially matching with roll-to-roll process. Herein, it demonstrates the encouraging results of one-step, antisolvent-free doctor-bladed methylammonium lead iodide (CH₃ NH₃ PbI_3, MAPbI₃ ) PSCs under a wide range of humidity from 45% to 82%. A synergy strategy of ionic-liquid methylammonium acetate (MAAc) and molecular phenylurea additives is developed to modulate the morphology and crystallization process of MAPbI₃ perovskite film, leading to high-quality MAPbI₃ perovskite film with large-size crystal, low defect density, and ultrasmooth surface. Impressive power conversion efficiency (PCE) of 20.34% is achieved for doctor-bladed PSCs under the humidity over 80% with a device structure of ITO/SnO₂ /MAPbI₃ /Spiro-OMeTAD/Ag. It is the highest PCEs for one-step solution-processed MAPbI₃ PSCs without antisolvent assistance. The research provides a facile and robust large-scale deposition technique to fabricate highly efficient and stable PSCs under a wide range of humidity, even with the humidity over 80%.

Polymeric ionic liquid-based formulations for the fabrication of highly stable perovskite nanocrystal composites for photocatalytic applications

Halide perovskite nanocrystals (PNCs) have emerged as potential visible-light photocatalysts because of their outstanding intrinsic properties, including high absorption coefficient and tolerance to defects, which reduces non-radiative recombination, and high oxidizing/reducing power coming from their tuneable band structure. Nevertheless, their sensitivity to humidity, light, heat and water represents a great challenge that limits their applications in solar driven photocatalytic applications. Herein, we demonstrate the synergistic potential of embedding PNCs into polymeric ionic liquids (PILs@PS) to fabricate suitable composites for photodegradation of organic dyes. In this context, the stability of the PNCs after polymeric encapsulation was enhanced, showing better light, moisture, water and thermal stability compared to pristine PNCs for around 200 days.

Advanced Formulations Based on Poly(ionic liquid) Materials for Additive Manufacturing

Innovation in materials specially formulated for additive manufacturing is of great interest and can generate new opportunities for designing cost-effective smart materials for next-generation devices and engineering applications. Nevertheless, advanced molecular and nanostructured systems are frequently not possible to integrate into 3D printable materials, thus limiting their technological transferability. In some cases, this challenge can be overcome using polymeric macromolecules of ionic nature, such as polymeric ionic liquids (PILs). Due to their tuneability, wide variety in molecular composition, and macromolecular architecture, they show a remarkable ability to stabilize molecular and nanostructured materials. The technology resulting from 3D-printable PIL-based formulations represents an untapped array of potential applications, including optoelectronic, antimicrobial, catalysis, photoactive, conductive, and redox applications.

In situ passivation of Pb0 traps by fluoride acid-based ionic liquids enables enhanced emission and stability of CsPbBr3 nanocrystals for efficient white light-emitting diodes

A great hurdle restricting the optoelectronic applications of cesium lead halide perovskite (CsPbX₃) nanocrystals (NCs) is due to the uncoordinated lead atoms (Pb⁰) on the surface, where most attempts to address the challenges in the literature depend on complicated post-treatment processes. Here we report a simple in situ surface engineering strategy to obtain highly fluorescent and stable perovskite NCs, wherein the introduction of the multifunctional additive 1-butyl-3-methyl-imidazolium tetrafluoroborate ([Bmim]BF₄) can significantly eliminate the Pb⁰ traps. The photoluminescence quantum yield (PLQY) of the as-synthesized NCs was improved from 63.82% to 94.63% due to the good passivation of the surface defects. We also confirm the universality of this in situ passivation pathway to remove Pb⁰ deep traps by using fluoride acid-based ionic liquids (ILs). Due to the high hydrophobicity of the cations of ILs, the as-prepared CsPbBr₃ NCs exhibit robust water resistance stability, maintaining 67.5% of the initial photoluminescence (PL) intensity after immersion in water for 21 days. A white light emitting diode (LED), assembled by mixing the as-synthesized CsPbBr₃ NCs and red K₂SiF₆:Mn⁴⁺ phosphors onto a blue chip, exhibits high luminous efficiency (100.07 lm W^-1) and wide color gamut (140.64% of the National Television System Committee (NTSC) standard). This work provides a promising and facile technique to eliminate the Pb⁰ traps and improve the optical performance and stability of halide perovskite NCs, facilitating their applications in optoelectronic fields.

Controllable Heterogenous Seeding-Induced Crystallization for High-Efficiency FAPbI3 -Based Perovskite Solar Cells Over 24

The addition of small seeding particles into a supersaturated solution is one among the most effective approaches to obtain high-quality semiconductor materials via increased crystallization rates. However, limited study is conducted on this approach for the fabrication of perovskite solar cells. Here, a new strategy-"heterogenous seeding-induced crystallization (hetero-SiC)" to assist the growth of FAPbI₃ -based perovskite is proposed. In this work, di-tert-butyl(methyl)phosphonium tetrafluoroborate is directly introduced into the precursor, which forms a low-solubility complex with PbI₂ . The low-solubility complex can serve as the seed to induce crystallization of the perovskite during the solvent-evaporation process. Various in situ measurement tools are used to visualize the hetero-SiC process, which is shown to be an effective way of manipulating the nucleation and crystal growth of perovskites. The hetero-SiC process greatly improves the film quality, reduces film defects, and suppresses nonradiative recombination. A hetero-SIC proof-of-concept device exhibits outstanding performance with 24.0% power conversion efficiency (PCE), well over the control device with 22.2% PCE. Additionally, hetero-SiC perovskite solar cell (PSC) stability under light illumination is enhanced and the PSC retains 84% of its initial performance after 1400 h of light illumination.

Stabilizing Perovskite Precursor by Synergy of Functional Groups for NiOx -Based Inverted Solar Cells with 23.5 % Efficiency

Perovskite solar cells suffer from poor reproducibility due to the degradation of perovskite precursor solution. Herein, we report an effective precursor stabilization strategy via incorporating 3-hydrazinobenzoic acid (3-HBA) containing carboxyl (-COOH) and hydrazine (-NHNH₂ ) functional groups as stabilizer. The oxidation of I^- , deprotonation of organic cations and amine-cation reaction are the main causes of the degradation of mixed organic cation perovskite precursor solution. The -NHNH₂ can reduce I₂ defects back to I^- and thus suppress the oxidation of I^- , while the H⁺ generated by -COOH can inhibit the deprotonation of organic cations and subsequent amine-cation reaction. The above degradation reactions are simultaneously inhibited by the synergy of functional groups. The inverted device achieves an efficiency of 23.5 % (certified efficiency of 23.3 %) with an excellent operational stability, retaining 94 % of the initial efficiency after maximum power point tracking for 601 hours.

PEDOT:PSS/CuCl Composite Hole Transporting Layer for Enhancing the Performance of 2D Ruddlesden-Popper Perovskite Solar Cells

Poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) is a popular hole transport layer (HTL) in 2D Ruddlesden-Popper (RP) perovskite solar cell (PSCs) due to its highly conductive, transparent, and solution-processable characteristics. However, fundamental questions such as its strong acidity or mismatched energy level with the 2D RP photoactive layer often restrict the performance and stability of devices. Herein, copper chloride (CuCl), a common direct band gap semiconductor, is doped into PEDOT:PSS, lowering the acidity and tuning the work function of PEDOT:PSS. Due to the improved wettability and the existing chloride in the PEDOT:PSS/CuCl composite substrate, the coated 2D perovskite films exhibit uniform morphology, vertically oriented crystal growth, and enhanced crystallinity. In comparison with controlled devices, the PEDOT:PSS/CuCl based inverted 2D RP PSCs show a maximum power conversion efficiency of 13.36% and long-term stability. The modified PEDOT:PSS overcomes intrinsic imperfections by doping CuCl, indicating that it has a lot of promise for mass production in electrical devices.

The Chemistry of the Passivation Mechanism of Perovskite Films with Ionic Liquids

Passivation of perovskite films by ionic liquids (ILs) improves the performance (efficiency and stability) of perovskite solar cells (PSCs). However, the role of ILs in the passivation of perovskite films is not fully understood. Here, we report the reactions of commonly used ILs with the components of perovskites. The reaction of ILs with perovskite precursors (PbI₂ and methylammonium iodide or formamidinium iodide) in a 1:1:1 molar ratio affords one-dimensional (1D) salts composed of the IL cation interspersed along infinite 1D polymeric [PbI₃]^-_n chains. If the IL is applied in excess, the resulting crystal is composed of six cations surrounding a discrete [Pb₃I₁₂]^6- cluster. All the isolated salts were unambiguously characterized by single-crystal X-ray diffraction analysis, which also reveals extensive hydrogen-bonding interactions.

Ultralow-cost portable device for cesium detection via perovskite fluorescence

Public anxiety and concern from cesium pollution in oceans have been back on the agenda since tons of nuclear waste water were announced to be poured into oceans. Cesium ion can easily enter organisms and bioaccumulate in animals and plants, thus its harm is chronic to humans through food chains. Here we showed a kind of hybrid ionic liquid membrane (HILM) for detection of cesium ion in seawater through CsPbBr₃ perovskite fluorescence. With sustainability in mind, HILM was built frugally. The lowest cost of HILM is below 3 cents per piece. The HILM can detect cesium ion quickly with eye-readable fluorescence signal. Ultracheap, portable, easy-to-use on-site detection device could offer benefit for personal security and applications in environment science and ecology in the future decades.

Black Phase of Inorganic Perovskite Stabilized with Carboxyimidazolium Iodide for Stable and Efficient Inverted Perovskite Solar Cells

As all-inorganic perovskite (CsPbI_3-xBr_x) is prone to phase transition from the α phase (black phase) to the δ phase (yellow phase) in a humid environment or under heating, improving the phase stability of all-inorganic perovskite of the black phase is one of the urgent problems to solve. Herein, 1,2-dimethyl-3-acetylimidazolium iodide (DMAII) is spin-coated onto the surface of CsPbI_3-xBr_x perovskite for use in p-i-n perovskite solar cells (PSCs). We find that the DMAII coating has two effects on the CsPbI_3-xBr_x perovskite film: surface passivation and phase stabilization of perovskite. Traps in the CsPbI_3-xBr_x perovskite film can be reduced significantly by DMAII passivation, resulting in enhanced hole extraction and suppressed charge recombination. Consequently, the power conversion efficiency (PCE) is improved from 10.81 to 13.14%. Moreover, the DMAII coating can significantly inhibit the phase transition from the α phase to the δ phase in a humid environment or under heating, as characterized by the X-ray diffraction pattern, UV-vis absorption spectrum, and film color. After exposing the CsPbI_3-xBr_x perovskite films to a humid atmosphere (relative humidity = 40-60%) for 6 h, the PCE decreases dramatically to only 0.12% of the initial PCE for the PSC without the DMAII coating, while the PCE maintains 80% of the initial PCE for the PSC with the DMAII coating. In addition, when the PSC devices are heated at 120 °C for 4 h, the control PSC shows a 96% decrease in PCE, while the PCE decay is only 9% for the DMAII-coated PSC. These findings indicate that carboxyl-substituted imidazolium iodide is a kind of promising material to not only passivate traps but also stabilize the black phase of all-inorganic perovskite.

A Special Additive Enables All Cations and Anions Passivation for Stable Perovskite Solar Cells with Efficiency over 23

Passivating undercoordinated ions is an effective way to reduce the defect densities at the surface and grain boundaries (GBs) of perovskite materials for enhanced photovoltaic performance and stability of perovskite solar cells (PSCs). Here, (BBF) complex is chosen as a multifunctional additive, which contains both C₇H₉N and BF₃ groups working as Lewis base and Lewis acid, respectively, can bond with Pb²⁺/I^- and FA⁺ on the surface and in the GBs in the perovskite film, affording passivation of both cation and anion defects. The synergistic effect of the C₇H₉N and BF₃ complex slows the crystallization during the perovskite film deposition to improve the crystalline quality, which reduces the trap density and the recombination in the perovskite film to suppress nonradiative recombination loss and minimizes moisture permeation to improve the stability of the perovskite material. Meanwhile, such an additive improves the energy-level alignment between the valence band of the perovskite and the highest occupied molecular orbital of the hole-transporting material, Spiro-OMeTAD. Consequently, our work achieves power conversion efficiency of 23.24%, accompanied by enhanced stability under ambient conditions and light illumination and opens a new avenue for improving the performance of PSCs through the use of a multifunctional complex.

Substance and shadow of formamidinium lead triiodide based solar cells

The current decade has witnessed a surge of progress in the investigation of methyl ammonium lead iodide (MAPbI3) perovskites for solar cell fabrication due to their intriguing electro-optical properties, despite the intrinsic degradation of the material that has restricted its commercialisation. As a promising alternative, solar cells based on its formamidinium analogue, FAPbI3, are currently being actively pursued for having demonstrated a certified efficiency of 24.4%, while the room-temperature conversion to a non-perovskite δ-phase impedes its further commercialisation, and strategies have been adopted to overcome this phase instability. An in-depth and real-time understanding of microstructural relationships with optoelectronic properties and their underlying mechanisms using operando in situ spectroscopic techniques is paramount. Thus, the design and development of a new process, data driven methodology, characterization and evaluation protocols for perovskite absorber layers and the fabricated devices is a judicious research direction. Here, in this perspective, we shed light on the compositional, surface engineering and crystallization kinetics manipulations for FAPbI3, followed by a proposition for unified testing protocols, for scalling of devices from the lab to the market.