Oxide/ZIF-8 Hybrid Nanofiber Yarns: Heightened Surface Activity for Exceptional Chemiresistive Sensing

Ultrafast and Parts-per-Billion-Level MEMS Gas Sensors by Hetero-Interface Engineering of 2D/2D Cu-TCPP@ZnIn2S4 with Enriched Surface Sulfur Vacancies

The primary challenge for resonant-gravimetric gas sensors is the synchronous improvement of the sensitivity and response time, which is restricted by low adsorption capacity and slow mass transfer in the sensing process and remains a great challenge. In this study, a novel 2D/2D Cu-TCPP@ZnIn2S4 composite is successfully constructed, in which Cu-TCPP MOF is used as a core substrate for the growth of 2D ultrathin ZnIn2S4 nanosheets with well-defined {0001} crystalline facets. The Cu-TCPP@ZnIn2S4 sensor exhibited high sensitivity (1.5 Hz@50 and 2.3 Hz@100 ppb), limit of detection (LOD: 50 ppb), and ultrafast (9 s @500 ppb) detection of triethylamine (TEA), which is the lowest LOD and the fastest sensor among the reported TEA sensors at room temperature, tackling the bottleneck for the ultrafast detection of the resonant-gravimetric sensor. These above results provide an innovative and easily achievable pathway for the synthesis of heterogeneous structure sensing materials.

Dual-Photosensitizer Synergy Empowers Ambient Light Photoactivation of Indium Oxide for High-Performance NO2 Sensing

Light-activated chemiresistors offer a powerful approach to achieving lower-temperature gas sensing with unprecedented sensitivities. However, an incomplete understanding of how photoexcited charge carriers enhance sensitivity obstructs the rational design of high-performance sensors, impeding the practical utilization under commonly accessible light sources instead of ultraviolet or higher-energy sources. Here, a rational approach is presented to modulate the electronic properties of the parent metal oxide phase, exemplified by this model system of Bi-doped In2O3 nanofibers decorated with Au nanoparticles (NPs) that exhibit superior NO2 sensing performance. Bi doping introduces mid-gap energy levels into In2O3, promoting photoactivation even under visible blue light. Additionally, green-absorbing plasmonic Au NPs facilitate electron transfer across the heterojunction, extending the photoactive region toward the green light. It is revealed that the direct involvement of photogenerated charge carriers in gas adsorption and desorption processes is pivotal for enhancing gas sensing performance. Owing to the synergistic interplay between the Bi dopants and the Au NPs, the Au-BixIn2-xO3 (x = 0.04) sensing layers attain impressive response values (Rg/Ra = 104 at 0.6 ppm NO2) under green light illumination and demonstrate practical viability through evaluation under simulated mixed-light conditions, all of which significantly outperforms previously reported visible light-activated NO2 sensors.

Robust Chemiresistive Behavior in Conductive Polymer/MOF Composites

Metal-organic frameworks (MOFs) are promising materials for gas sensing but are often limited to single-use detection. A hybridization strategy is demonstrated synergistically deploying conductive MOFs (cMOFs) and conductive polymers (cPs) as two complementary mixed ionic-electronic conductors in high-performing stand-alone chemiresistors. This work presents significant improvement in i) sensor recovery kinetics, ii) cycling stability, and iii) dynamic range at room temperature. The effect of hybridization across well-studied cMOFs is demonstrated based on 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP) and 2,3,6,7,10,11-hexaiminotriphenylene (HITP) ligands with varied metal nodes (Co, Cu, Ni). A comprehensive mechanistic study is conducted to relate energy band alignments at the heterojunctions between the MOFs and the polymer with sensing thermodynamics and binding kinetics. The findings reveal that hole enrichment of the cMOF component upon hybridization leads to selective enhancement in desorption kinetics, enabling significantly improved sensor recovery at room temperature, and thus long-term response retention. This mechanism is further supported by density functional theory calculations on sorbate-analyte interactions. It is also found that alloying cPs and cMOFs enables facile thin film co-processing and device integration, potentially unlocking the use of these hybrid conductors in diverse electronic applications.

Building Feedback-Regulation System Through Atomic Design for Highly Active SO2 Sensing

Reasonably constructing an atomic interface is pronouncedly essential for surface-related gas-sensing reaction. Herein, we present an ingenious feedback-regulation system by changing the interactional mode between single Pt atoms and adjacent S species for high-efficiency SO2 sensing. We found that the single Pt sites on the MoS2 surface can induce easier volatilization of adjacent S species to activate the whole inert S plane. Reversely, the activated S species can provide a feedback role in tailoring the antibonding-orbital electronic occupancy state of Pt atoms, thus creating a combined system involving S vacancy-assisted single Pt sites (Pt-Vs) to synergistically improve the adsorption ability of SO2 gas molecules. Furthermore, in situ Raman, ex situ X-ray photoelectron spectroscopy testing and density functional theory analysis demonstrate the intact feedback-regulation system can expand the electron transfer path from single Pt sites to whole Pt-MoS2 supports in SO2 gas atmosphere. Equipped with wireless-sensing modules, the final Pt1-MoS2-def sensors array can further realize real-time monitoring of SO2 levels and cloud-data storage for plant growth. Such a fundamental understanding of the intrinsic link between atomic interface and sensing mechanism is thus expected to broaden the rational design of highly effective gas sensors.

n-Type boron β-diketone-containing conjugated polymers for high-performance room temperature ammonia sensors

Organic semiconductor (OSC) gas sensors with good mechanical flexibility have received considerable attention as commercial and wearable devices. However, due to poor resistance to moisture and low conductivity, the improvement in the sensing capability of individual OSCs is limited. Reported here is a promising pathway to construct a series of conjugated organic polymers (COPs) with well-defined pyrimidine (Py-COP) or boron β-diketone (BF-COP) units. Unlike traditional metal- or carbon-based hybrid materials, the developed COPs can provide abundant absorption sites for gaseous analytes. As a result, the as-prepared BF-COP results in an excellent sensing response of over 1500 (Ra/Rg) toward 40 ppm of NH3 at room temperature, which is the highest value among those of pristine COPs as n-type sensing materials. Notably, they can maintain their initial sensing responses for two months and 90% relative humidity resistance. Combining the results of in situ Fourier transform infrared spectroscopy and theoretical calculations, the β-diketone skeleton is found to activate the surface electronic environment, verifying that the electron-deficient B ← O groups are adsorption centers. The B/N-heterocyclic decoration effectively modulates the redox properties and electronic interactions, as well as perturbs charge transfer in typical π-conjugated COPs. These results offer insight into developing highly efficient OSC gas sensors, which potentially have broadened sensing applications in the areas of organoboron chemistry.

Electrospinning Nanofibers as Stretchable Sensors for Wearable Devices

Wearable devices attract great attention in intelligent medicine, electronic skin, artificial intelligence robots, and so on. However, boundedness of traditional sensors based on rigid materials unconstrained self-multilayer structure assembly and dense substrate in stretchability and permeability limits their applications. The network structure of the elastomeric nanofibers gives them excellent air permeability and stretchability. By introducing metal nanofillers, intrinsic conductive polymers, carbon materials, and other methods to construct conductive paths, stretchable conductors can be effectively prepared by elastomeric nanofibers, showing great potential in the field of flexible sensors. This perspective briefly introduces the representative preparations of conductive thermoplastic polyurethane, nylon, and hydrogel nanofibers by electrospinning and the application of integrated electronic devices in biological signal detection. The main challenge is to unify the stretchability and conductivity of the fiber structure.

Synergistic Effect of Electron Scattering and Space Charge Transfer Enabled Unprecedented Room Temperature NO2 Sensing Response of SnO2

Metal oxide gas sensors have long faced the challenge of low response and poor selectivity, especially at room temperature (RT). Herein, a synergistic effect of electron scattering and space charge transfer is proposed to comprehensively improve gas sensing performance of n-type metal oxides toward oxidizing NO2 (electron acceptor) at RT. To this end, the porous SnO2 nanoparticles (NPs) assembled from grains of about 4 nm with rich oxygen vacancies are developed through an acetylacetone-assisted solvent evaporation approach combined with precise N2 and air calcinations. The results show that the as-fabricated porous SnO2 NPs sensor exhibits an unprecedented NO2 -sensing performance, including outstanding response (Rg /Ra  = 772.33 @ 5 ppm), fast recovery (<2 s), an extremely low detection limit (10 ppb), and exceptional selectivity (response ratio >30) at RT. Theoretical calculation and experimental tests confirm that the excellent NO2 sensing performance is mainly attributed to the unique synergistic effect of electron scattering and space charge transfer. This work proposes a useful strategy for developing high-performance RT NO2 sensors using metal oxides, and provides an in-depth understanding for the basic characteristics of the synergistic effect on gas sensing, paving the way for efficient and low power consumption gas detection at RT.

Two-Dimensional Electrically Conductive Metal-Organic Frameworks as Chemiresistive Sensors

Metal-organic frameworks (MOFs) have emerged as attractive chemical sensing materials due to their exceptionally high porosity and chemical diversity. Nevertheless, the utilization of MOFs in chemiresistive type sensors has been hindered by their inherent limitation in electrical conductivity. The recent emergence of two-dimensional conductive MOFs (2D c-MOFs) has addressed this limitation by offering enhanced electrical conductivity, while still retaining the advantageous properties of MOFs. In particular, c-MOFs have shown promising advantages for the fabrication of sensors capable of operating at room temperature. Thus, active research on gas sensors utilizing c-MOFs is currently underway, focusing on enhancing sensitivity and selectivity. To comprehend the potential of MOFs as chemiresistive sensors for future applications, it is crucial to understand not only the fundamental properties of conductive MOFs but also the state-of-the-art works that contribute to improving their performance. This comprehensive review delves into the distinctive characteristics of 2D c-MOFs as a new class of chemiresistors, providing in-depth insights into their unique sensing properties. Furthermore, we discuss the proposed sensing mechanisms associated with 2D c-MOFs and provide a concise summary of the strategies employed to enhance the sensing performance of 2D c-MOFs. These strategies encompass a range of approaches, including the design of metal nodes and linkers, morphology control, and the synergistic use of composite materials. In addition, the review thoroughly explores the prospects of 2D c-MOFs as chemiresistors and elucidates their remarkable potential for further advancements. The insights presented in this review shed light on future directions and offer valuable opportunities in the chemical sensing research field.

MOF-Based Chemiresistive Gas Sensors: Toward New Functionalities

The sensing performances of gas sensors must be improved and diversified to enhance quality of life by ensuring health, safety, and convenience. Metal-organic frameworks (MOFs), which exhibit an extremely high surface area, abundant porosity, and unique surface chemistry, provide a promising framework for facilitating gas-sensor innovations. Enhanced understanding of conduction mechanisms of MOFs has facilitated their use as gas-sensing materials, and various types of MOFs have been developed by examining the compositional and morphological dependences and implementing catalyst incorporation and light activation. Owing to their inherent separation and absorption properties and catalytic activity, MOFs are applied as molecular sieves, absorptive filtering layers, and heterogeneous catalysts. In addition, oxide- or carbon-based sensing materials with complex structures or catalytic composites can be derived by the appropriate post-treatment of MOFs. This review discusses the effective techniques to design optimal MOFs, in terms of computational screening and synthesis methods. Moreover, the mechanisms through which the distinctive functionalities of MOFs as sensing materials, heterostructures, and derivatives can be incorporated in gas-sensor applications are presented.

Single-Atom Cu Stabilized on Ultrathin WO2.72 Nanowire for Highly Selective and Ultrasensitive ppb-Level Toluene Detection

Various catalysts are developed to improve the performance of metal oxide semiconductor gas sensors, but achieving high selectivity and response intensity in chemiresistive gas sensors (CGSs) remains a significant challenge. In this study, an in situ-annealing approach to synthesize Cu catalytic sites on ultrathin WO2.72 nanowires for detecting toluene at ultralow concentrations (Ra /Rg = 1.9 at 10 ppb) with high selectivity is developed. Experimental and molecular dynamic studies reveal that the Cu single atoms (SAs) act as active sites, promoting the oxidation of toluene and increasing the affinity of Cu single-atom catalysts (SACs)-containing sensing materials for toluene while weakening the association with carbon dioxide or water vapor. Density functional theory studies show that the selective binding of toluene to Cu SAs is due to the favorable binding sites provided by Cu SAs for toluene molecules over other gaseous species, which aids the adsorption of toluene on WO2.72 nanowires. This study demonstrates the successful atomic-level interface regulation engineering of WO2.72 nanowire-supported Cu SAs, providing a potential strategy for the development of highly active and durable CGSs.

Space-Confined Metal Ion Strategy for Carbon Materials Derived from Cobalt Benzimidazole Frameworks with High Desalination Performance in Simulated Seawater

Various metal ions with different valence states (Mg²⁺ , Al³⁺ , Ca²⁺ , Ti⁴⁺ , Mn²⁺ , Fe³⁺ , Ni²⁺ , Zn²⁺ , Pb²⁺ , Ba²⁺ , Ce⁴⁺ ) are successfully confined in quasi-microcube shaped cobalt benzimidazole frameworks using a space-confined synthesis strategy. More importantly, a series of derived carbon materials that confine metal ions are obtained by high-temperature pyrolysis. Interestingly, the derived carbon materials exhibited electric double-layer and pseudocapacitance properties because of the presence of metal ions with various valence states. Moreover, the presence of additional metal ions within carbon materials may create new phases, which can accelerate Na⁺ insertion/extraction and thus increase electrochemical adsorption. Density functional theory results showed that carbon materials in which Ti ions are confined exhibit enhanced insertion/extraction of Na⁺ resulting from the presence of the characteristic anatase crystalline phases of TiO₂ . The Ti-containing materials have an impressive desalination capacity (62.8 mg g^-1 ) in capacitive deionization (CDI) applications with high cycling stability. This work provides a facile synthetic strategy for the confinement of metal ions in metal-organic frameworks and thus supports the further development of derived carbon materials for seawater desalination by CDI.

Breathable MOFs Layer on Atomically Grown 2D SnS2 for Stable and Selective Surface Activation

2D transition metal dichalcogenides (TMDs) have significant research interests in various novel applications due to their intriguing physicochemical properties. Notably, one of the 2D TMDs, SnS₂ , has superior chemiresistive sensing properties, including a planar crystal structure, a large surface-to-volume ratio, and a low electronic noise. However, the long-term stability of SnS₂ in humid conditions remains a critical shortcoming towards a significant degradation of sensitivity. Herein, it is demonstrated that the subsequent self-assembly of zeolite imidazolate framework (ZIF-8) can be achieved in situ growing on SnS₂ nanoflakes as the homogeneous porous materials. ZIF-8 layer on SnS₂ allows the selective diffusion of target gas species, while effectively preventing the SnS₂ from severe oxidative degradation. Molecular modeling such as molecular dynamic simulation and DFT calculation, further supports the mechanism of sensing stability and selectivity. From the results, the in situ grown ZIF-8 porous membrane on 2D materials corroborates the generalizable strategy for durable and reliable high-performance electronic applications of 2D materials.

Interfacial engineered superelastic metal-organic framework aerogels with van-der-Waals barrier channels for nerve agents decomposition

Chemical warfare agents (CWAs) significantly threaten human peace and global security. Most personal protective equipment (PPE) deployed to prevent exposure to CWAs is generally devoid of self-detoxifying activity. Here we report the spatial rearrangement of metal-organic frameworks (MOFs) into superelastic lamellar-structured aerogels based on a ceramic network-assisted interfacial engineering protocol. The optimized aerogels exhibit efficient adsorption and decomposition performance against CWAs either in liquid or aerosol forms (half-life of 5.29 min, dynamic breakthrough extent of 400 L g^-1) due to the preserved MOF structure, van-der-Waals barrier channels, minimized diffusion resistance (~41% reduction), and stability over a thousand compressions. The successful construction of the attractive materials offers fascinating perspectives on the development of field-deployable, real-time detoxifying, and structurally adaptable PPE that could be served as outdoor emergency life-saving devices against CWAs threats. This work also provides a guiding toolbox for incorporating other critical adsorbents into the accessible 3D matrix with enhanced gas transport properties.

In-situ forming dynamic covalently crosslinked nanofibers with one-pot closed-loop recyclability

Polymeric nanofibers are attractive nanomaterials owing to their high surface-area-to-volume ratio and superior flexibility. However, a difficult choice between durability and recyclability continues to hamper efforts to design new polymeric nanofibers. Herein, we integrate the concept of covalent adaptable networks (CANs) to produce a class of nanofibers ⎯ referred to dynamic covalently crosslinked nanofibers (DCCNFs) via electrospinning systems with viscosity modulation and in-situ crosslinking. The developed DCCNFs possess homogeneous morphology, flexibility, mechanical robustness, and creep resistance, as well as good thermal and solvent stability. Moreover, to solve the inevitable issues of performance degradation and crack of nanofibrous membranes, DCCNF membranes can be one-pot closed-loop recycled or welded through thermal-reversible Diels-Alder reaction. This study may unlock strategies to fabricate the next generation nanofibers with recyclable features and consistently high performance via dynamic covalent chemistry for intelligent and sustainable applications.