Room-Temperature Sodium-Sulfur Batteries: Rules for Catalyst Selection and Electrode Design

Review on Cooperative Catalysis for Room-Temperature Sodium-Sulfur Batteries

The low cost and high energy density characteristics of room-temperature sodium-sulfur (RT Na-S) batteries remarkably promote the development of sustainable large-scale energy-storage systems. However, there are serious problems with the shuttle effect and slow conversion kinetics caused by polysulfide dissolution in RT Na-S batteries, which can lead to decreased coulombic efficiency, rapid capacity degradation, and poor rate performance, hindering the practical application of RT Na-S batteries. Recently, numerous multimodal approaches have been attempted to address these issues, thereby promoting cycling stability and raising the energy density of RT Na-S batteries to a higher level. However, there is still a lack of a comprehensive and systematic summary of catalyst design based on the cooperative catalysis principle. In this review, the application advantages, operation mechanisms, and main challenges of RT Na-S batteries are first introduced. After that, the latest progress based on cooperative catalysts is elaborately summarized, exploring the corresponding work mechanisms and design principles of RT Na-S batteries. Finally, a summary of future research directions for developing high-performance RT Na-S batteries is presented.

Axial ligand induces the charge localization of Ca single-atom sites for efficient Na-S batteries

The main-group s-block metal single-atom catalysts (SACs) are typically regarded as catalytically inactive for sulfur conversion reactions in sodium-sulfur batteries. Herein, we design efficient calcium (Ca) SACs coordinated with one axial N atom and four planar O atoms (Ca-O4N-C) for sodium-sulfur batteries. The axial N ligand induces the charge localization at Ca sites to strengthen p-p orbital-hybridization between Ca centers and sulfur species, which boosts the affinity toward sodium polysulfides (Na2Sn) and simultaneously promotes the conversion kinetics. The Ca-O4N-C@S exhibits superior sulfur conversion activity of 1211 mAh g-1 based on the mass of sulfur at 335 mA g-1 after 100 cycles under a sulfur loading of 1.0 mg cm-2 with an electrolyte of 2M sodium bis(trifluoromethylsulfonyl)imide in propylene carbonate/fluoroethylene carbonate and an electrolyte-to-sulfur ratio of 70 μL mg-1, which is well-placed among d-block SACs for sodium-sulfur batteries. This work regulates the p orbital charge distribution of Ca SACs for efficient sodium-sulfur batteries.

Unsaturation degree of Fe single atom site manipulates polysulfide behavior in sodium-sulfur batteries

Sodium | |sulfur batteries hold great promise for grid-scale energy storage, yet their performance is hindered by the shuttling and sluggish redox of sulfur species. Herein, we report a strategic design of sulfur hosts modified with coordinatively unsaturated iron single-atom (Fe‒Nx) for sodium | |sulfur batteries. Utilizing theoretical calculations, geometric descriptor γ (lNa‒S/lFe‒N) and electronic descriptor φ (eg /t2g) simultaneously correlated with the unsaturation degree of Fe‒Nx site are proposed. A negative correlation between γ and the adsorption strength of sodium polysulfides, along with a positive correlation between φ and the decomposition capability of Na2S are established. The Fe‒N1 sites, with the minimum γ and maximum φ values, are identified as the optimal functional species for optimizing polysulfides behaviors. Sodium | |sulfur batteries utilizing Fe‒N1 /S positive electrodes deliver improved sulfur utilization (81.4% at 167.5 mA g‒1), sustained rate performance (1003.0 mAh g‒1 at 1675 mA g‒1), and stable cycling (83.5% retention over 450 cycles at 3350 mA g‒1). Moreover, Fe‒N1/S positive electrodes enable sodium | |sulfur pouch cells to deliver a sulfur utilization of 77.4% (1296.9 mAh g‒1) at 0.1 A g‒1. Our work offers a strategy for designing high-activity, fast redox sulfur positive electrodes and validates the practical potential of sodium | |sulfur batteries.

Balancing Electronic Spin State via Atomically-Dispersed Heteronuclear Fe-Co Pairs for High-Performance Sodium-Sulfur Batteries

Room-temperature sodium-sulfur (Na-S) batteries are emerging as a promising next-generation energy storage technology, offering high energy densities at low cost and utilizing abundant elements. However, their practical application is hindered by the shuttle effect of sodium-polysulfides and the sluggish kinetics of sulfur redox reactions. In this study, we demonstrate a heteronuclear diatomic catalyst featuring Fe and Co bimetallic sites embedded in nitrogen-doped hollow carbon nanospheres (Fe-Co/NC) as an effective sulfur host at the cathode of Na-S batteries. Aberration-corrected high-angle annular dark field scanning transmission electron microscopy demonstrates the presence of isolated Fe-Co atomic pairs, while synchrotron radiation X-ray absorption fine structure analysis confirms the (Fe-Co-N6) coordination structure. Density functional theory calculations show that the introduction of Fe atoms induces electron delocalization in Co(II), shifting the electronic configuration from a low-spin to a higher-spin state. This shift enhances the hybridization of the Co dz2 orbitals with the antibonding π orbitals of sulfur atoms within the sodium sulfide species that accelerates their catalytic conversion. As a result, Fe-Co/NC-based cathodes exhibit excellent cycling stability (378 mAh g-1 after 2000 cycles) and impressive rate performance (341.1 mAh g-1 under 5 A g-1).

Design Strategies of S8 Molecule Cathodes for Room-Temperature Na-S Batteries

Sodium-sulfur batteries have been provided as a highly attractive solution for large-scale energy storage, benefiting from their substantial storage capacity, the abundance of raw materials, and cost-effectiveness. Nevertheless, conventional sodium-sulfur batteries have been the subject of critique due to their high operating temperature and costly maintenance. In contrast, room-temperature sodium-sulfur batteries exhibit significant advantages in these regards. The most commonly utilized cathode active material is the S8 molecule, whose intricate transformation process plays a crucial role in enhancing battery capacity. However, this process concomitantly generates a substantial quantity of polysulfide intermediates, leading to diminished kinetics and reduced cathode utilization efficiency. The pivotal strategy is the design of catalysts with adsorption and catalytic functionalities, which can be applied to the cathode. Herein, we present a summary of the current research progress in terms of nanostructure engineering, catalyst strategies, and regulating sulfur species conversion pathways from the perspective of high-performance host design strategy. A comprehensive analysis of the catalytic performance is provided from four perspectives: metal catalysts, compound catalysts, atomically dispersed catalysts, and heterojunctions. Finally, we analyze the bottlenecks and challenges, offering some thoughts and suggestions for overcoming these issues.

Progress and perspectives on electrocatalysis in room-temperature Na-S batteries

Room-temperature sodium-sulfur (RT Na-S) batteries that typically feature multielectron conversion chemistries can allow an ultrahigh specific capacity of 1675 mA h g-1 and a high energy density of 1275 W h kg-1 but unfortunately suffer from a lot of intractable challenges from sulfur cathodes. These issues cover the poor electronic conductivity of pristine sulfur and solid products, the severe shuttle effect of polysulfides, and the sluggish redox kinetics, etc. The shuttling behavior of polysulfides always leads to cathode/anode instability and performance degeneration. Recently, the emerging catalysis strategy has been demonstrated as a reliable pathway to tackle the central issues caused by sulfur electrochemistry and revitalize RT Na-S batteries. This review provides an overview of electrocatalysis in the realm of RT Na-S batteries. Sulfur conversion chemistries and critical challenges in RT Na-S batteries are generalized firstly. The emphasis is focused on discussing chemisorption mechanisms for polysulfides, material innovation of catalysts, selectivity and design of catalysts, and a series of catalysis regulation strategies. Finally, existing challenges and perspectives regarding catalysis in RT Na-S batteries are offered, with the aim of propelling its rapid development.

Sustainable Sulfur-Carbon Hybrids for Efficient Sulfur Redox Conversions in Nanoconfined Spaces

Nanoconfinement is a promising strategy in chemistry enabling increased reaction rates, enhanced selectivity, and stabilized reactive species. Sulfur's abundance and highly reversible two-electron transfer mechanism have fueled research on sulfur-based electrochemical energy storage. However, the formation of soluble polysulfides, poor reaction kinetics, and low sulfur utilization are current bottlenecks for broader practical application. Herein, a novel strategy is proposed to confine sulfur species in a nanostructured hybrid sulfur-carbon material. A microporous sulfur-rich carbon is produced from sustainable natural precursors via inverse vulcanization and condensation. The material exhibits a unique structure with sulfur anchored to the conductive carbon matrix and physically confined in ultra-micropores. The structure promotes Na+ ion transport through micropores and electron transport through the carbon matrix, while effectively immobilizing sulfur species in the nanoconfined environment, fostering a quasi-solid-state redox reaction with sodium. This translates to ≈99% utilization of the 2e- reduction of sulfur and the highest reported capacity for a room temperature Na-S electrochemical system, with high rate capability, coulombic efficiency, and long-term stability. This study offers an innovative approach toward understanding the key physicochemical properties of sulfurcarbon nanohybrid materials, enabling the development of high-performance cathode materials for room-temperature Na-S batteries with efficient sulfur utilization.

In Situ Electrochemical Evolution of Amorphous Metallic Borides Enabling Long Cycling Room-/Subzero-Temperature Sodium-Sulfur Batteries

Room temperature sodium-sulfur batteries (RT Na-S) have garnered significant attention for their high energy density and cost-effectiveness, positioning them as a promising alternative to lithium-ion batteries. However, they encounter challenges such as the dissolution of sodium polysulfides and sluggish kinetics. Introducing high-activity electrocatalysts and enhancing the density of active sites represents an efficient strategy to enhance reaction kinetics. Here, an amorphous Ni-B material that undergoes electrochemical evolution to generate the NiSx phase within an operational sodium-sulfur battery, contrasting with the crystalline NiB counterpart is fabricated. Electrochemical cycling facilitated the establishment of an interface between the amorphous Ni-B and NiSx, leading to heightened catalytic activity and improved reaction kinetics. Consequently, batteries utilizing the amorphous Ni-B showcased a notable initial specific capacity of 1487 mAh g-1 at 0.2 A g-1, exhibiting exceptional performance under high current densities of 5 A g-1, in low-temperature conditions (-10 °C), with high sulfur loading, and in pouch cell configurations.

Co3O4-Induced Na2CO3-Rich SEI Film on an FeNCN Electrode with Promoted Loading and High-Rate Na-Storage Performance

Iron carbodiimide (FeNCN) often suffers from unstable interfacial structure with an unexpected failure of Na-ion storage performance. In this work, Co3O4 particles were deposited on the surface of FeNCN. This Co3O4 nanolayer led to the formation of a Na2CO3-rich inorganic component SEI film to enhance the stability of a promoted-loading FeNCN electrode interface with fast Na+ migration pathway. Benefitting from this strategy, the FeNCN electrode could present a capacity retention rate of 99.95% per cycle after 1500 cycles at 1 A g-1. The design of interfacial structure in a promoted-loading electrode could be a reference for stable and high-rate performance of carbodiimide-based materials.

The role of electrocatalytic materials for developing post-lithium metal||sulfur batteries

The exploration of post-Lithium (Li) metals, such as Sodium (Na), Potassium (K), Magnesium (Mg), Calcium (Ca), Aluminum (Al), and Zinc (Zn), for electrochemical energy storage has been driven by the limited availability of Li and the higher theoretical specific energies compared to the state-of-the-art Li-ion batteries. Post-Li metal||S batteries have emerged as a promising system for practical applications. Yet, the insufficient understanding of quantitative cell parameters and the mechanisms of sulfur electrocatalytic conversion hinder the advancement of these battery technologies. This perspective offers a comprehensive analysis of electrode parameters, including S mass loading, S content, electrolyte/S ratio, and negative/positive electrode capacity ratio, in establishing the specific energy (Wh kg-1) of post-Li metal||S batteries. Additionally, we critically evaluate the progress in investigating electrochemical sulfur conversion via homogeneous and heterogeneous electrocatalytic approaches in both non-aqueous Na/K/Mg/Ca/Al||S and aqueous Zn||S batteries. Lastly, we provide a critical outlook on potential research directions for designing practical post-Li metal||S batteries.

A Critical Review on Room-Temperature Sodium-Sulfur Batteries: From Research Advances to Practical Perspectives

Room-temperature sodium-sulfur (RT-Na/S) batteries are promising alternatives for next-generation energy storage systems with high energy density and high power density. However, some notorious issues are hampering the practical application of RT-Na/S batteries. Besides, the working mechanism of RT-Na/S batteries under practical conditions such as high sulfur loading, lean electrolyte, and low capacity ratio between the negative and positive electrode (N/P ratio), is of essential importance for practical applications, yet the significance of these parameters has long been disregarded. Herein, it is comprehensively reviewed recent advances on Na metal anode, S cathode, electrolyte, and separator engineering for RT-Na/S batteries. The discrepancies between laboratory research and practical conditions are elaborately discussed, endeavors toward practical applications are highlighted, and suggestions for the practical values of the crucial parameters are rationally proposed. Furthermore, an empirical equation to estimate the actual energy density of RT-Na/S pouch cells under practical conditions is rationally proposed for the first time, making it possible to evaluate the gravimetric energy density of the cells under practical conditions. This review aims to reemphasize the vital importance of the crucial parameters for RT-Na/S batteries to bridge the gaps between laboratory research and practical applications.

In Situ Construction of NiCoMn-LDH Derived from Zeolitic Imidazolate Framework on Eggshell-Like Carbon Skeleton for High-Performance Flexible Supercapacitors

Active compounds based on LDH (ternary layered double hydroxide) are considered the perfect supercapacitor electrode materials on account of their superior electrochemical qualities and distinct structural characteristics, and flexible supercapacitors are an ideal option as an energy source for wearable electronics. However, the prevalent aggregation effect of LDH materials results in significantly compromised actual specific capacitance, which limits its broad practical applications. In this research, a 3D eggshell-like interconnected porous carbon (IPC) framework with confinement and isolation capability is designed and synthesized by using glucose as the carbon source to disperse the LDH active material and enhance the conductivity of the composite material. Second, by constructing NiCoMn-LDH nanocage structure based on ZIF-67 (zeolitic imidazolate framework-67) at the nanometer scale the obtained IPC/NiCoMn-LDH electrode material can expose more active sites, which allows to achieve excellent specific capacitance (2236 F g-1/ 310.6 mAh g-1 at 1 A g-1), good rate as well as the desired cycle stability (85.9% of the initial capacitance upon 5000 cycles test). The constructed IPC/NiCoMn-LDH//IPC ASC (asymmetric supercapacitor) exhibits superior capacitive property (135 F g-1/60.1 mAh g-1 at 0.5 A g-1) as well as desired energy density (40 Wh kg-1 at 800 W kg-1).

Enhancing Conversion Kinetics through Electron Density Dual-Regulation of Catalysts and Sulfur toward Room-/Subzero-Temperature Na-S Batteries

Room-temperature sodium-sulfur (RT Na/S) batteries have received increasing attention for the next generation of large-scale energy storage, yet they are hindered by the severe dissolution of polysulfides, sluggish redox kinetic, and incomplete conversion of sodium polysulfides (NaPSs). Herein, the study proposes a dual-modulating strategy of the electronic structure of electrocatalyst and sulfur to accelerate the conversion of NaPSs. The selenium-modulated ZnS nanocrystals with electron rearrangement in hierarchical structured spherical carbon (Se-ZnS/HSC) facilitate Na+ transport and catalyze the conversion between short-chain sulfur and Na2S. And the in situ introduced Se within S can enhance conductivity and form an S─Se bond, suppressing the "polysulfides shuttle". Accordingly, the S@Se-ZnS/HSC cathode exhibits a specific capacity of as high as 1302.5 mAh g-1 at 0.1 A g-1 and ultrahigh-rate capability (676.9 mAh g-1 at 5.0 A g-1). Even at -10 °C, this cathode still delivers a high reversible capacity of 401.2 mAh g-1 at 0.05 A g-1 and 94% of the original capacitance after 50 cycles. This work provides a novel design idea for high-performance Na/S batteries.

Quasi-Solid Sulfur Conversion for Energetic All-Solid-State Na-S Battery

The high theoretical energy density (1274 Wh kg-1) and high safety enable the all-solid-state Na-S batteries with great promise for stationary energy storage system. However, the uncontrollable solid-liquid-solid multiphase conversion and its associated sluggish polysulfides redox kinetics pose a great challenge in tunning the sulfur speciation pathway for practical Na-S electrochemistry. Herein, we propose a new design methodology for matrix featuring separated bi-catalytic sites that control the multi-step polysulfide transformation in tandem and direct quasi-solid reversible sulfur conversion during battery cycling. It is revealed that the N, P heteroatom hotspots are more favorable for catalyzing the long-chain polysulfides reduction, while PtNi nanocrystals manipulate the direct and full Na2S4 to Na2S low-kinetic conversion during discharging. The electrodeposited Na2S on strongly coupled PtNi and N, P-codoped carbon host is extremely electroreactive and can be readily recovered back to S8 without passivation of active species during battery recharging, which delivers a true tandem electrocatalytic quasi-solid sulfur conversion mechanism. Accordingly, stable cycling of the all-solid-state soft-package Na-S pouch cells with an attractive specific capacity of 876 mAh gS -1 and a high energy of 608 Wh kgcathode -1 (172 Wh kg-1, based on the total mass of cathode and anode) at 60 °C are demonstrated.

Rechargeable Metal-Sulfur Batteries: Key Materials to Mechanisms

Rechargeable metal-sulfur batteries are considered promising candidates for energy storage due to their high energy density along with high natural abundance and low cost of raw materials. However, they could not yet be practically implemented due to several key challenges: (i) poor conductivity of sulfur and the discharge product metal sulfide, causing sluggish redox kinetics, (ii) polysulfide shuttling, and (iii) parasitic side reactions between the electrolyte and the metal anode. To overcome these obstacles, numerous strategies have been explored, including modifications to the cathode, anode, electrolyte, and binder. In this review, the fundamental principles and challenges of metal-sulfur batteries are first discussed. Second, the latest research on metal-sulfur batteries is presented and discussed, covering their material design, synthesis methods, and electrochemical performances. Third, emerging advanced characterization techniques that reveal the working mechanisms of metal-sulfur batteries are highlighted. Finally, the possible future research directions for the practical applications of metal-sulfur batteries are discussed. This comprehensive review aims to provide experimental strategies and theoretical guidance for designing and understanding the intricacies of metal-sulfur batteries; thus, it can illuminate promising pathways for progressing high-energy-density metal-sulfur battery systems.

Understanding the charge transfer effects of single atoms for boosting the performance of Na-S batteries

The effective flow of electrons through bulk electrodes is crucial for achieving high-performance batteries, although the poor conductivity of homocyclic sulfur molecules results in high barriers against the passage of electrons through electrode structures. This phenomenon causes incomplete reactions and the formation of metastable products. To enhance the performance of the electrode, it is important to place substitutable electrification units to accelerate the cleavage of sulfur molecules and increase the selectivity of stable products during charging and discharging. Herein, we develop a single-atom-charging strategy to address the electron transport issues in bulk sulfur electrodes. The establishment of the synergistic interaction between the adsorption model and electronic transfer helps us achieve a high level of selectivity towards the desirable short-chain sodium polysulfides during the practical battery test. These finding indicates that the atomic manganese sites have an enhanced ability to capture and donate electrons. Additionally, the charge transfer process facilitates the rearrangement of sodium ions, thereby accelerating the kinetics of the sodium ions through the electrostatic force. These combined effects improve pathway selectivity and conversion to stable products during the redox process, leading to superior electrochemical performance for room temperature sodium-sulfur batteries.

Synergistic Performance Boosts of Dopamine-Derived Carbon Shell Over Bi-metallic Sulfide: A Promising Advancement for High-Performance Lithium-Ion Battery Anodes

A CoMoS composite is synthesized to combine the benefits of cobalt and molybdenum sulfides as an anodic material for advanced lithium-ion batteries (LIBs). The synthesis is accomplished using a simple two-step hydrothermal method and the resulting CoMoS nanocomposites are subsequently encapsulated in a carbonized polydopamine shell. The synthesis procedure exploited the self-polymerization ability of dopamine to create nitrogen-doped carbon-coated cobalt molybdenum sulfide, denoted as CoMoS@NC. Notably, the de-lithiation capacity of CoMoS and CoMoS@NC is 420 and 709 mAh g⁻1, respectively, even after 100 lithiation/de-lithiation cycles at a current density of 200 mA g⁻1. Furthermore, excellent capacity retention ability is observed for CoMoS@NC as it withstood 600 consecutive lithiation/de-lithiation cycles with 94% capacity retention. Moreover, a LIB full-cell assembly incorporating the CoMoS@NC anode and an NMC-532 cathode is subjected to comprehensive electrochemical and practical tests to evaluate the performance of the anode. In addition, the density functional theory showcases the increased lithium adsorption for CoMoS@NC, supporting the experimental findings. Hence, the use of dopamine as a nitrogen-doped carbon shell enhanced the performance of the CoMoS nanocomposites in experimental and theoretical tests, positioning the material as a strong candidate for LIB anode.

Strong d-π Orbital Coupling of Co-C4 Atomic Sites on Graphdiyne Boosts Potassium-Sulfur Battery Electrocatalysis

Potassium-sulfur (K-S) batteries are severely limited by the sluggish kinetics of the solid-phase conversion of K2S3/K2S2 to K2S, the rate-determining and performance-governing step, which urgently requires a cathode with facilitated sulfur accommodation and improved catalytic efficiency. To this end, we leverage the orbital-coupling approach and herein report a strong d-π coupling catalytic configuration of single-atom Co anchored between two alkynyls of graphdiyne (Co-GDY). The d-π orbital coupling of the Co-C4 moiety fully redistributes electrons two-dimensionally across the GDY, and as a result, drastically accelerates the solid-phase K2S3/K2S2 to K2S conversion and enhances the adsorption of sulfur species. Applied as the cathode, the S/Co-GDY delivered a record-high rate performance of 496.0 mAh g-1 at 5 A g-1 in K-S batteries. In situ and ex situ characterizations coupling density functional theory (DFT) calculations rationalize how the strong d-π orbital coupling of Co-C4 configuration promotes the reversible solid-state transformation kinetics of potassium polysulfide for high-performance K-S batteries.

Binary Atomic Sites Enable a Confined Bidirectional Tandem Electrocatalytic Sulfur Conversion for Low-Temperature All-Solid-State Na-S Batteries

The broader implementation of current all-solid-state Na-S batteries is still plagued by high operation temperature and inefficient sulfur utilization. And the uncontrollable sulfur speciation pathway along with the sluggish polysulfide redox kinetics further compromise the theoretical potentials of Na-S chemistry. Herein, we report a confined bidirectional tandem electrocatalysis effect to tune polysulfide electrochemistry in a novel low-temperature (80 °C) all-solid-state Na-S battery that utilizes Na3 Zr2 Si2 PO12 ceramic membrane as a platform. The bifunctional hollow sulfur matrix consisting binary atomically dispersed MnN4 and CoN4 hotspots was fabricated using a sacrificial template process. Upon discharge, CoN4 sites activate sulfur species and catalyze long-chain to short-chain polysulfides reduction, while MnN4 centers substantially accelerate the low-kinetic Na2 S4 to Na2 S directly conversion, manipulating the uniform deposition of electroactive Na2 S and avoiding the formation of irreversible products (e.g., Na2 S2 ). The intrinsic synergy of two catalytic centers benefits the Na2 S decomposition and minimizes its activation barrier during battery recharging and then efficiently mitigate the cathodic passivation. As a result, the stable cycling of all-solid-state Na-S cell delivers an attractive reversible capacity of 1060 mAh g-1 with a high CE of 98.5 % and a high energy of 1008 Wh kgcathode -1 , comparable to the liquid electrolyte cells.

Optimizing potassium polysulfides for high performance potassium-sulfur batteries

Potassium-sulfur batteries attract tremendous attention as high-energy and low-cost energy storage system, but achieving high utilization and long-term cycling of sulfur remains challenging. Here we show a strategy of optimizing potassium polysulfides for building high-performance potassium-sulfur batteries. We design the composite of tungsten single atom and tungsten carbide possessing potassium polysulfide migration/conversion bi-functionality by theoretical screening. We create two ligand environments for tungsten in the metal-organic framework, which respectively transmute into tungsten single atom and tungsten carbide nanocrystals during pyrolysis. Tungsten carbide provide catalytic sites for potassium polysulfides conversion, while tungsten single atoms facilitate sulfides migration thereby significantly alleviating the insulating sulfides accumulation and the associated catalytic poisoning. Resultantly, highly efficient potassium-sulfur electrochemistry is achieved under high-rate and long-cycling conditions. The batteries deliver 89.8% sulfur utilization (1504 mAh g-1), superior rate capability (1059 mAh g-1 at 1675 mA g-1) and long lifespan of 200 cycles at 25 °C. These advances enlighten direction for future KSBs development.

Enhancing the Initial Coulombic Efficiency of Sodium-Ion Batteries via Highly Active Na2 S as Presodiation Additive

Recently, sodium-ion batteries (SIBs) have received considerable attention for large-scale energy storage applications. However, the low initial Coulombic efficiency of traditional SIBs severely impedes their further development. Here, a highly active Na2 S-based composite is employed as a self-sacrificial additive for sodium compensation in SIBs. The in situ synthesized Na2 S is wrapped in a carbon matrix with nanoscale particle size and good electrical conductivity, which helps it to achieve a significantly enhanced electrochemical activity as compare to commercial Na2 S. As a highly efficient presodiation additive, the proposed Na2 S/C composite can reach an initial charge capacity of 407 mAh g-1 . When 10 wt.% Na2 S/C additive is dispersed in the Na3 V2 (PO4 )3 cathode, and combined with a hard carbon anode, the full cell achieves 24.3% higher first discharge capacity, which corresponds to a 18.3% increase in the energy density from 117.2 to 138.6 Wh kg-1 . Meanwhile, it is found that the Na2 S additive does not generate additional gas during the initial charging process, and under an appropriate content, its reaction product has no adverse impact on the cycling stability and rate performance of SIBs. Overall, this work establishes Na2 S as a highly effective additive for the construction of advanced high-energy-density SIBs.

Core-Shell Tandem Catalysis Coupled with Interface Engineering For High-Performance Room-Temperature Na-S Batteries

The sluggish redox kinetics and shuttle effect seriously impede the large application of room-temperature sodium-sulfur (RT Na-S) batteries. Designing effective catalysts into cathode material is a promising approach to overcome the above issues. However, considering the multistep and multiphase transformations of sulfur redox process, it is impractical to achieve the effective catalysis of the entire S8 →Na2 Sx →Na2 S conversion through applying a single catalyst. Herein, this work fabricates a nitrogen-doped core-shell carbon nanosphere integrated with two different catalysts (ZnS-NC@Ni-N4 ), where isolated Ni-N4 sites and ZnS nanocrystals are distributed in the shell and core, respectively. ZnS nanocrystals ensure the rapid reduction of S8 into Na2 Sx (4 < x ≤ 8), while Ni-N4 sites realize the efficient conversion of Na2 Sx into Na2 S, bridged by the diffusion of Na2 Sx from the core to shell. Besides, Ni-N4 sites on the shell can also induce an inorganic-rich cathode-electrolyte interface (CEI) on ZnS-NC@Ni-N4 to further inhibit the shuttle effect. As a result, ZnS-NC@Ni-N4 /S cathode exhibits an excellent rate-performance (650 mAh g-1 at 5 A g-1 ) and ultralong cycling stability for 2000 cycles with a low capacity-decay rate of 0.011% per cycle. This work will guide the rational design of multicatalysts for high-performance RT Na-S batteries.

Polar Electrocatalysts for Preventing Polysulfide Migration and Accelerating Redox Kinetics in Room-Temperature Sodium-Sulfur Batteries

Due to the high theoretical energy density, low cost, and rich abundance of sodium and sulfur, room-temperature sodium-sulfur (RT Na-S) batteries are investigated as the promising energy storage system. However, the inherent insulation of the S₈ , the dissolution and shuttle of the intermediate sodium polysulfides (NaPSs), and especially the sluggish conversion kinetics, restrict the commercial application of the RT Na-S batteries. To address these issues, various catalysts are developed to immobilize the soluble NaPSs and accelerate the conversion kinetics. Among them, the polar catalysts display impressive performance. Polar catalysts not only can significantly accelerate (or alter) the redox process, but also can adsorb polar NaPSs through polar-polar interaction because of their intrinsic polarity, thus inhibiting the notorious shuttle effect. Herein, the recent advances in the electrocatalytic effect of polar catalysts on the manipulation of S speciation pathways in RT Na-S batteries are reviewed. Furthermore, challenges and research directions to realize rapid and reversible sulfur conversion are put forward to promote the practical application of RT Na-S batteries.

High performance sulfur/carbon cathode for Na-S battery enabled by electrocatalytic effect of Sn-doped In2S3

Room-temperature sodium-sulfur (RT Na-S) batteries have been attracting enormous interests due to their low-cost, high capacity and environmental benignity. However, the shuttle effect and the sluggish electrochemical reaction activity of sodium polysulfides (NaPSs) seriously restrict their practical application. To solve these issues, we rationally designed an advanced Sn-doped In₂S₃/S/C cathode for RT Na-S batteries by magnetron sputtering in this work, which exhibited a high reversible capacity (1663.5 mAh g^-1 at 0.1 A g^-1) and excellent cycling performance (902.9 mAh g^-1 after 50 cycles). The in situ electrochemical impedance spectroscopy indicated that the Sn-doped In₂S₃ coating can accelerate charge-transfer kinetics and facilitate the diffusion of Na⁺. Furthermore, theoretical calculation revealed that doping of Sn into In₂S₃ can reduce the energy band gap, thus accelerating the electron transfer and promoting the electrochemical conversion of active species. It is demonstrated that adjusting the electronic structure is a reliable method to improve the electrocatalytic effect of catalyst and significantly improve the performance of S cathode in RT Na-S batteries.

Oxygen vacancy-mediated amorphous GeOx assisted polysulfide redox kinetics for room-temperature sodium-sulfur batteries

The practical applications of room-temperature sodium-sulfur (RT Na-S) batteries have been greatly hindered by the natural sluggish reaction kinetics of sulfur and the shuttle effect of sodium polysulfide (NaPSs). Herein, oxygen vacancy (OV)-mediated amorphous GeOx/nitrogen doped carbon (donated as GeOx/NC) composites were well designed as sulfur hosts for RT Na-S batteries. Experimental and density functional theory studies show that the introduction of oxygen vacancies on GeOx/NC can effectively immobilize polysulfides and accelerate the redox kinetics of polysulfides. Meanwhile, the micro-and mesoporous framework, acting as a reactor for storing active S, is conducive to alleviating the expansion of S during the charging/discharging process. Consequently, the S@GeOx/NC cathode affords a reversible capacity of 1017 mA h g-1 at 0.1 A g-1 after 100 cycles, outstanding rate capability of 333 mA h g-1 at 10.0 A g-1 and long lifespan cyclability of 385 mAh g-1 at 1 A g-1 after 1200 cycles. This work furnishes a new way for the rational design of metal oxides with oxygen vacancies and boosts the application for RT Na-S batteries.