Bidirectional Water-Stream Behavior on a Multifunctional Membrane for Simultaneous Energy Generation and Water Purification

Preventing Benzoquinone-Based Catalyst Aggregation Enables the One-Step Synthesis of Highly Conductive Poly(benzodifurandione) without Post-Reaction Purification

Conductive polymers have become crucial in advancing various electronic applications. While p-type materials like poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) are widely used and produced at scale, the development of high-performance n-type polymers has lagged due to challenges in synthesis and scalability. In this work, a novel method is introduced to synthesize the highly conductive n-type polymer poly(benzodifurandione) (PBFDO) using α-tocopherylquinone (α-TQ) as a catalyst. This approach eliminates the need for post-reaction dialysis, a major obstacle to large-scale PBFDO production. By preventing catalyst aggregation, high electrical conductivity (>1320 S cm-1) is achieved, which remains stable in air for over 180 d, significantly simplifying the process. The α-TQ-synthesized PBFDO also exhibits excellent thermoelectric properties, with a power factor exceeding 100 µW m-1 K-2, placing it among the highest-performing n-type thermoelectric polymers. Additionally, residual α-TQ acts as a plasticizer, reducing the elastic modulus by over tenfold while maintaining high conductivity, making this material suitable for mechanically compliant electronics. Similarly, residual α-TQ lowers the thermal conductivity of PBFDO by more than an order of magnitude. The process is scalable, as demonstrated by producing high-conductivity ink in a 20 L reactor. This work presents an efficient and sustainable approach for large-scale n-type polymer production.

Covalent Organic Frameworks for Membrane Separation

Membranes with switchable wettability, solvent resistance, and toughness have emerged as promising materials for separation applications. However, challenges like limited mechanical strength, poor chemical stability, and structural defects during membrane fabrication hinder their widespread adoption. Covalent organic frameworks (COFs), crystalline materials constructed from organic molecules connected by covalent bonds, offer a promising solution due to their high porosity, stability, and customizable properties. The ordered structures and customizable functionality provide COFs with a lightweight framework, large surface area, and tunable pore sizes, which have attracted increasing attention for their applications in membrane separations. Recent research has extensively explored the preparation strategies of COF membranes and their applications in various separation processes. This review uniquely delves into the influence of various COF membrane fabrication techniques, including interfacial polymerization, layer-by-layer assembly, and in situ growth, on membrane thickness and performance. It comprehensively explores the design strategies and potential applications of these methods, with a particular focus on gas separation, oil/water separation, and organic solvent nanofiltration. Furthermore, future opportunities, challenges within this field, and potential directions for future development are proposed.

High-Performance MXene Hydrogel for Self-Propelled Marangoni Swimmers and Water-Enabled Electricity Generator

Developing multifunctional materials that integrate self-propulsion and self-power generation is a significant challenge. This study introduces a high-performance MXene-chitosan composite hydrogel (CM) that successfully combines these functionalities. Utilizing Schiff base bond and hydrogen bond interactions, the CM hydrogel, composed of chitosan, vanillin, and MXene, achieves exceptional self-propulsion on water driven by Marangoni forces. The hydrogel demonstrates rapid movement, extended operation, and controllable trajectories. Notably, the CM hydrogel also exhibits superior degradability, recyclability, and repeatability. Furthermore, the nano-confined channels within the hydrogel play a crucial role in enhancing its water-enabled electricity generation (WEG) performance. By efficiently adsorbing water molecules and selectively transporting cations through these channels, the hydrogel can generate electricity from water molecules and cations more efficiently. As a result, the CM-WEG achieves a stable open-circuit voltage of up to 0.83 V and a short-circuit current of 0.107 mA on seawater, with further improvements in K2CO3-containing water, reaching 1.26 V and 0.922 mA. Leveraging its unique combination of self-propulsion and WEG functionalities, the CM hydrogel is successfully used for cargo delivery while simultaneously powering electronic devices. This research represents a significant step toward the development of self-powered, autonomous soft robotics, opening new research directions in the field.

2D Materials for Potable Water Application: Basic Nanoarchitectonics and Recent Progresses

Water polluted by toxic chemicals due to waste from chemical/pharmaceuticals and harmful microbes such as E. Coli bacteria causes several fatal diseases; and therefore, water filtration is crucial for accessing clean and safe water necessary for good health. Conventional water filtration technologies include activated carbon filters, reverse osmosis, and ultrafiltration. However, they face several challenges, including high energy consumption, fouling, limited selectivity, inefficiencies in removing certain contaminants, dimensional control of pores, and structural/chemical changes at higher thermal conditions and upon prolonged usage of water filter. Recently, the advent of 2D materials such as graphene, BN, MoS2, MXenes, and so on opens new avenues for advanced water filtration systems. This review delves into the nanoarchitectonics of 2D materials for water filtration applications. The current state of water filtration technologies is explored, the inherent challenges they face are outlines, and the unique properties and advantages of 2D materials are highlighted. Furthermore, the scope of this review is discussed, which encompasses the synthesis, characterization, and application of various 2D materials in water filtration, providing insights into future research directions and potential industrial applications.

Hermetic hydrovoltaic cell sustained by internal water circulation

Numerous efforts have been devoted to harvesting sustainable energy from environment. Among the promising renewable resources, ambient heat exhibits attractive prospects due to its ubiquity and inexhaustibility, and has been converted into electricity through water evaporation-induced hydrovoltaic approaches. However, current hydrovoltaic approaches function only in low-humidity environments and continuously consume water. Herein, we fabricate a hermetic hydrovoltaic cell (HHC) to harvest ambient heat, and have fully addressed the limitations posed by environmental conditions. Meanwhile, for the first time we develop an internal circulation hydrovoltaic mechanism. Taking advantage of the heterogeneous wicking bilayer structure, we verify that inside the hermetic cell, the ambient temperature fluctuation-induced evaporation and further the water circulation can persist, which sustains the hydrovoltaic effect to convert ambient heat into electricity. More importantly, the hermetic design enables the cell to work continuously and reliably for 160 h with negligible water consumption, unaffected by external influences such as wind and light, making it an excellent candidate for extreme situations such as water-scarce deserts, highly humid tropical rain forests, rainy days, and dark underground engineering. These findings provide an easily accessible and widely applicable route for stably harnessing renewable energy, and more notably, offer a novel paradigm toward leveraging low-grade ambient heat energy via circulation design.

Recent Advances in Fibrous Materials for Hydroelectricity Generation

Depleting fossil energy sources and conventional polluting power generation pose a threat to sustainable development. Hydroelectricity generation from ubiquitous and spontaneous phase transitions between liquid and gaseous water has been considered a promising strategy for mitigating the energy crisis. Fibrous materials with unique flexibility, processability, multifunctionality, and practicability have been widely applied for fibrous materials-based hydroelectricity generation (FHG). In this review, the power generation mechanisms, design principles, and electricity enhancement factors of FHG are first introduced. Then, the fabrication strategies and characteristics of varied constructions including 1D fiber, 1D yarn, 2D fabric, 2D membrane, 3D fibrous framework, and 3D fibrous gel are demonstrated. Afterward, the advanced functions of FHG during water harvesting, proton dissociation, ion separation, and charge accumulation processes are analyzed in detail. Moreover, the potential applications including power supply, energy storage, electrical sensor, and information expression are also discussed. Finally, some existing challenges are considered and prospects for future development are sincerely proposed.

A Transpiration-Driven Electrokinetic Power Generator with a Salt Pathway for Extended Service Life in Saltwater

To ensure prolonged functionality of transpiration-driven electrokinetic power generators (TEPGs) in saltwater environments, it is imperative to mitigate salt accumulation. This study presents a salt pathway transpiration-driven electrokinetic power generator (SPTEPG), incorporating MXene, graphene oxide (GO), and carbon nanotubes (CNTs) as active materials, along with cellulose nanofibers (CNF) and poly(vinyl alcohol) (PVA) as aqueous binders and nonwoven fabrics. This unique combination confers exceptional hydrophilicity and enhances the energy generation performance. When tested with deionized water, the SPTEPG achieved a maximum voltage of 0.6 V and a current of 4.2 μA. In simulated seawater conditions, the presence of conductive ions in the solution boosted these values to 0.64 V and 42 μA. The incorporation of the salt pathway mechanism facilitates the return of excess salt deposits to the bulk solution, thus extending the SPTEPG's service life in saltwater environments. This research offers a straightforward yet effective strategy for designing transpiration-driven power generators suitable for saline water applications.

Hydrovoltaic Electricity Generator with Hygroscopic Materials: A Review and New Perspective

The global energy crisis caused by the overconsumption of nonrenewable fuels has prompted researchers to develop alternative strategies for producing electrical energy. In this review, a fascinating strategy that simply utilizes water, an abundant natural substance throughout the globe and even in air as moisture, as a power source is introduced. The concept of the hydrovoltaic electricity generator (HEG) proposed herein involves generating an electrical potential gradient by exposing the two ends of the HEG device to dissimilar physicochemical environments, which leads to the production of an electrical current through the active material. HEGs, with a large variety of viable active materials, have much potential for expansion toward diverse applications including permanent and/or emergency power sources. In this review, representative HEGs that generate electricity by the mechanisms of diffusion, streaming, and capacitance as case studies for building a fundamental understanding of the electricity generation process are discussed. In particular, by comparing the use and absence of hygroscopic materials, HEG mechanism studies to establish active material design principles are meticulously elucidated. The review with future perspectives on electrode design using conducting nanomaterials, considerations for high performance device construction, and potential impacts of the HEG technology in improving the livelihoods are reviewed.