Multileveled Hierarchical Hydrogel with Continuous Biophysical and Biochemical Gradients for Enhanced Repair of Full-Thickness Osteochondral Defect

Bi-phasic integrated silk fibroin/polycaprolactone scaffolds for osteochondral regeneration inspired by the native joint tissue and interface

Osteochondral scaffolds designed with bi-phasic and multi-phasic have typically struggled with post-implantation delamination. To address this issue, we developed a novel integrated scaffold with natural and continuous interface and heterogeneous bilayer structure. Through layer-by-layer wet electrospinning, two-dimensional (2D) bi-layer integrated membranes of silk fibroin (SF) and polycaprolactone (PCL) were fabricated. These membranes were then transformed into three-dimensional (3D) scaffolds using a CO2 gas foaming technique, followed by gelatin coating on the osteogenic layer to afford final bi-phasic porous scaffolds. In vitro studies indicated that the 3D scaffolds better-maintained cell phenotypes than conventional 2D electrospun films. Additionally, the 3D scaffolds showed superior cartilage repair and osteoinductivity potential, with increased subchondral bone volume and reduced defect area in rat osteochondral defects models at 12 weeks. Taken together, these gas-foamed scaffolds were a promising candidate for osteochondral regeneration.

A novel Liesegang-patterned mineralized hydrogel drives bone regeneration with microstructure control

Bone regeneration remains a critical challenge in modern medicine. Recent advancements have focused on incorporating hierarchical microstructures into biomaterials to enhance osteogenesis. Mineralized hydrogels, while promising, face limitations in precise microstructure control due to technical complexities. In this study, we present a biomimetic hierarchical structural mineralized hydrogel featuring a Liesegang pattern. In vitro experiments confirm that it significantly promotes the migration and osteogenic differentiation of bone mesenchymal stem cells (BMSCs). In vivo experiments further demonstrate its ability to significantly promote bone regeneration, with newly formed bone closely replicating the hydrogel's architecture. Notably, this hydrogel synthesis strategy eliminates time-consuming fabrication and extensive post-processing, offering a scalable and efficient route for advanced bone-regenerative materials.

Engineered 3D mesenchymal stem cell aggregates with multifunctional prowess for bone regeneration: Current status and future prospects

BACKGROUND

Impaired efficacy of in vitro expanded mesenchymal stem cells (MSCs) is a universal and thorny situation, which cast a shadow on further clinical translation of exogenous MSCs. Moreover, the relatively lengthy healing process, host metabolic heterogeneity and the sophisticated cell recognition and crosstalk pose rigorous challenges towards MSC-based bone regeneration strategies. Three-dimensional (3D) cell aggregates facilitate more robust intercellular communications and cell-extracellular matrix (ECM) interactions, providing a better mimicry of microarchitectures and biochemical milieus in vivo, which is conducive for stemness maintenance and downstream bone formation.

AIM OF REVIEW

This review enunciates the phenotypic features of MSCs in aggregates, which deepens the knowledge of the MSC fate determination in 3D microenvironment. By summarizing current empowerment methods and biomaterial-combined techniques for establishing functionalized MSC aggregates, this review aims to spark innovative and promising solutions for exalting the translational value of MSCs and improve their therapeutic applications in bone tissue repair.

KEY SCIENTIFIC CONCEPTS OF REVIEW

3D aggregates optimize regenerative behaviors of in vitro cultured MSCs including cell adhesion, viability, proliferation, pluripotency and immunoregulation capacity, etc. Biomaterials hybridization endows MSC aggregates with tailored mechanical and biological properties, which offers more possibilities in adapting various clinical scenarios.

Controlled platelet-derived growth factor delivery by hyaluronic acid hydrogels with tunable crosslinking for accelerated chronic wound healing

Chronic wound healing is a complex process requiring sustained activity of growth factors across the whole healing process. Among these growth factors, platelet-derived growth factor (PDGF) plays a pivotal role. However, the short half-life of PDGF limits its therapeutic efficacy. This study introduces a hyaluronic acid-based hydrogel system loading with PDGF, MA-HA-Gelx/PDGF, designed for the controlled release of PDGF. By tuning the ratio of cross-linkers with different hydrolysis rates, the PDGF loaded hydrogel system ensures sustained release of bioactive PDGF. In vivo assays proved that, MA-HA-Gelx/PDGF could efficiently promote the proliferation and migration of fibroblasts. Furthermore, MA-HA-Gelx/PDGF could enhance neovascularization and accelerate the wound closure of a chronic wound bearing mouse model. This PDFG loaded hydrogel system offers a promising strategy for chronic wound treatment.

Biological Reinforced Concrete for Cartilage Repair With 3D Printing

The development of biomimetic cartilage constructs (BCCs) with natural extracellular matrix (ECM) microenvironments and topological cues to accelerate the reconstruction of natural articular cartilage (NAC) after injury is challenging due to its complex structure, low cellular content, and less vascularity. Inspired by concrete rebar structure, a biomimetic cartilage named "biological reinforced concrete" is fabricated, with collagen fiber orientation transitioning from parallel to perpendicular, replicating the ECM microenvironments and complex construct of NAC. 3D-printed ultrafine fiber networks (UFNs) served as a degradable "biorebars", while a hybrid biohydrogel acted as "biocement". The stem cells are utilized as "bioactive aggregates". The biocement is developed by combining and screening various biohydrogels to mimic an ECM microenvironment conducive to the formation of NAC. By adjusting the fiber scale and spacing of the UFNs, the mechanical properties of the biomimetic cartilages are controlled to resemble those of NAC. Additionally, the UFNs guided the directed growth of cells and the orderly secretion of ECM. Subsequently, the developed BCCs are implanted into an osteochondral defect, and after 4 months, they successfully reconstructed the complex structure of cartilage with mechanical properties closely resembling those of NAC. The biological reinforced concrete offers a customizable and universal strategy for tissue regeneration.

Biphasic biomimetic scaffolds based on a regionally decalcified bone framework and pre-chondrogenic microspheres for osteochondral defect repair

Osteochondral defects are still facing a significant challenge in clinical surgery, making post-trauma repair difficult. Tissue engineering has provided a promising approach to solving these defects. However, existing scaffolds cannot replicate the complex biphasic cartilage-bone microenvironment with accuracy. We aimed to develop a biphasic biomimetic scaffold with regionally regulated vascularization that promoted chondrogenesis and osteogenesis through bidirectional regulation of endochondral ossification. This scaffold consisted of pre-chondrogenic microspheres (PCMs) and a decalcified bone frame prepared by decalcifying the cartilage layer and bone layer of the scaffold to varying degrees. Incorporation of PCMs into the cartilage layer created a microenvironment that promoted cartilage regeneration while axitinib was modified to inhibit vascularization and enhance cartilage regeneration. The bone layer provided a microenvironment that promoted endochondral ossification and facilitated bone repair. In vitro studies have shown that axitinib-modified cartilage layers significantly inhibit the VEGF expression of pre-chondrogenic cells, while decalcified bone powder from the bone layer significantly promotes the ossification of PCMs. In vivo experiments indicated that this decalcified bone frame controls the endochondral ossification of PCMs through regionalized angiogenesis, promoting the integrated regeneration and reconstruction of osteochondral defects in rabbit knee joints. These results suggest that our designed demineralized bone frame can precisely engineer the osteochondral regeneration microenvironment, providing theoretical guidance for the integrated regeneration and repair of anisotropic tissue injuries.

Dual-Gradient Silk-Based Hydrogel for Spatially Targeted Delivery and Osteochondral Regeneration

Contemporary clinical interventions for cartilage injuries focus on symptom management through pharmaceuticals and surgical procedures. Recent research has aimed at developing innovative scaffolds with biochemical elements, yet challenges like inadequate targeted delivery and reduced load-bearing capacity hinder their adoption. Inspired by the spatial gradients of biophysical and biochemical cues in native osteochondral tissues, a silk-based hydrogel that facilitates spontaneous dual-gradient formation, including mechanical gradients and growth factor gradients, for tissue regeneration, is presented. Driven by an electrical field, the hydrogel transitions from stiff to soft along the anode-to-cathode direction, mimicking the anisotropic structure of natural tissues. Simultaneously, incorporated growth factors encapsulated by charged monomers migrate to the cathode region, creating another parallel gradient that enables their sustained release. This design maintains bioactivity and enhances programmable growth factor concentration in the defect environment. In a rabbit model with full-thickness osteochondral defects, the dual-gradient hydrogel demonstrates significant potential for promoting osteochondral regeneration, offering a promising tool for clinical translation.

Combining Hard Shell with Soft Core to Enhance Enzyme Activity and Resist External Disturbances

Immobilizing enzymes onto solid supports having enhanced catalytic activity and resistance to harsh external conditions is considered as a promising and critical method of broadening enzymatic applications in biosensing, biocatalysis, and biomedical devices; however, it is considerably hampered by limited strategies. Here, a core-shell strategy involving a soft-core hexahistidine metal assembly (HmA) is innovatively developed and characterized with encapsulated enzymes (catalase (CAT), horseradish peroxidase, glucose oxidase (GOx), and cascade enzymes (CAT+GOx)) and hard porous shells (zeolitic imidazolate framework (ZIF), ZIF-8, ZIF-67, ZIF-90, calcium carbonate, and hydroxyapatite). The enzyme-friendly environment provided by the embedded HmA proves beneficial for enhanced catalytic activity, which is particularly effective in preserving fragile enzymes that will have been deactivated without the HmA core during the mineralization of porous shells. The enzyme encapsulated within a core-shell particle exhibits noteworthy resilience against harsh external conditions, including heat, organic solvents, and proteinase K. Additionally, no significant alteration in the catalytic behavior of the enzyme is observed after multiple cycles of usage. This study offers a novel approach for immobilizing enzymes and rendering them resistant to harsh external conditions, with potential applications in diverse fields, including biocatalysis, bioremediation, and biomedical engineering.

In situ magnetic-field-assisted bioprinting process using magnetorheological bioink to obtain engineered muscle constructs

Tissue-engineered anisotropic cell constructs are promising candidates for treating volumetric muscle loss (VML). However, achieving successful cell alignment within macroscale 3D cell constructs for skeletal muscle tissue regeneration remains challenging, owing to difficulties in controlling cell arrangement within a low-viscosity hydrogel. Herein, we propose the concept of a magnetorheological bioink to manipulate the cellular arrangement within a low-viscosity hydrogel. This bioink consisted of gelatin methacrylate (GelMA), iron oxide nanoparticles, and human adipose stem cells (hASCs). The cell arrangement is regulated by the responsiveness of iron oxide nanoparticles to external magnetic fields. A bioprinting process using ring magnets was developed for in situ bioprinting, resulting in well-aligned 3D cell structures and enhanced mechanotransduction effects on hASCs. In vitro analyses revealed upregulation of cellular activities, including myogenic-related gene expression, in hASCs. When implanted into a VML mouse model, the bioconstructs improved muscle functionality and regeneration, validating the effectiveness of the proposed approach.

Mechano-Responsive Biomaterials for Bone Organoid Construction

Mechanical force is essential for bone development, bone homeostasis, and bone fracture healing. In the past few decades, various biomaterials have been developed to provide mechanical signals that mimic the natural bone microenvironment, thereby promoting bone regeneration. Bone organoids, emerging as a novel research approach, are 3D micro-bone tissues that possess the ability to self-renew and self-organize, exhibiting biomimetic spatial characteristics. Incorporating mechano-responsive biomaterials in the construction of bone organoids presents a promising avenue for simulating the mechanical bone microenvironment. Therefore, this review commences by elucidating the impact of mechanical force on bone health, encompassing both cellular interactions and alterations in bone structure. Furthermore, the most recent applications of mechano-responsive biomaterials within the realm of bone tissue engineering are highlighted. Three different types of mechano-responsive biomaterials are introduced with a focus on their responsive mechanisms, construction strategies, and efficacy in facilitating bone regeneration. Based on a comprehensive overview, the prospective utilization and future challenges of mechano-responsive biomaterials in the construction of bone organoids are discussed. As bone organoid technology advances, these biomaterials are poised to become powerful tools in bone regeneration.

Tough Polyurethane Hydrogels with a Multiple Hydrogen-Bond Interlocked Bicontinuous Phase Structure Prepared by In Situ Water-Induced Microphase Separation

Hydrogels with mechanical performances similar to load-bearing tissues are in demand for in vivo applications. In this work, inspired by the self-assembly behavior of amphiphilic polymers, polyurethane-based tough hydrogels with a multiple hydrogen-bond interlocked bicontinuous phase structure through in situ water-induced microphase separation strategy are developed, in which poly(ethylene glycol)-based polyurethane (PEG-PU, hydrophilic) and poly(ε-caprolactone)-based polyurethane (PCL-PU, hydrophobic) are blended to form dry films followed by water swelling. A multiple hydrogen bonding factor, imidazolidinyl urea, is introduced into the synthesis of the two polyurethanes, and the formation of multiple hydrogen bonds between PEG-PU and PCL-PU can promote homogeneous microphase separation for the construction of bicontinuous phase structures in the hydrogel network, by which the hydrogel features break strength of 12.9 MPa, fracture energy of 2435 J m-2, and toughness of 48.2 MJ m-3. As a biomedical patch, the outstanding mechanical performances can withstand abdominal pressure to prevent hernia formation in the abdominal wall defect model. Compared to the commercial PP mesh, hydrogel can prevent tissue/organ adhesion to reduce inflammatory responses and promote angiogenesis, thereby accelerating the repair of abdominal wall defects. This work may provide useful inspiration for researchers to design different gel materials through solvent-induced microphase separation.

Hierarchy Reproduction: Multiphasic Strategies for Tendon/Ligament-Bone Junction Repair

Tendon/ligament-bone junctions (T/LBJs) are susceptible to damage during exercise, resulting in anterior cruciate ligament rupture or rotator cuff tear; however, their intricate hierarchical structure hinders self-regeneration. Multiphasic strategies have been explored to fuel heterogeneous tissue regeneration and integration. This review summarizes current multiphasic approaches for rejuvenating functional gradients in T/LBJ healing. Synthetic, natural, and organism-derived materials are available for in vivo validation. Both discrete and gradient layouts serve as sources of inspiration for organizing specific cues, based on the theories of biomaterial topology, biochemistry, mechanobiology, and in situ delivery therapy, which form interconnected network within the design. Novel engineering can be constructed by electrospinning, 3-dimensional printing, bioprinting, textiling, and other techniques. Despite these efforts being limited at present stage, multiphasic scaffolds show great potential for precise reproduction of native T/LBJs and offer promising solutions for clinical dilemmas.

3D-Printed In Situ Growth of Bilayer MOF Hydrogels for Accelerated Osteochondral Defect Repair

Repairing osteochondral (OC) defect presents a significant challenge due to the intricate structural requirements and the unpredictable differentiation pathways of bone marrow mesenchymal stem cells (BMSCs). To address this challenge, a novel biomimetic OC hydrogel scaffold is developed that features a structure of soft and hard components. This scaffold incorporates bilayer metal-organic frameworks (MOFs), specifically ZIF-67 in the upper layer and ZIF-8 in the lower layer, achieved through an in situ printing process. This configuration enables the spatial and temporal modulation of BMSC differentiation by controlling the release of Co2⁺ and Zn2⁺. The results demonstrate that the bilayer MOF hydrogels significantly outperform hydrogels that either lack MOFs or contain a single type of MOF in enhancing repair outcomes in rabbit models of knee OC defects. The improved regenerative efficacy is attributed to the distinct chondrogenic and osteogenic differentiation cues provided by the bilayer MOFs, effectively guiding BMSCs toward enhanced tissue regeneration. This customizable biomimetic OC hydrogel scaffold not only opens new avenues for innovative therapeutic strategies but also holds great promise for widespread clinical applications.

A stimulus responsive microneedle-based drug delivery system for cancer therapy

The intricate nature of the tumor microenvironment (TME) results in the inefficient delivery of anticancer drugs within tumor tissues, significantly compromising the therapeutic effect of cancer treatment. To address this issue, transdermal drug delivery microneedles (MNs) with high mechanical strength have emerged. Such MNs penetrate the skin barrier, enabling efficient drug delivery to tumor tissues. This approach enhances drug bioavailability, while also mitigating concerns such as liver and kidney toxicity associated with intravenous and oral drug administration. Notably, stimulus responsive MNs designed for drug delivery have the capacity to respond to various biological signals and pathological changes. This adaptability enables them to exert therapeutic effects within the TME, exploiting biochemical variations and tailoring treatment strategies to suit tumor characteristics. The present review surveys recent advancements in responsive MN systems. This comprehensive analysis serves as a valuable reference for the prospective application of smart MN drug delivery systems in cancer therapy.

Biodegradable Piezoelectric-Conductive Integrated Hydrogel Scaffold for Repair of Osteochondral Defects

Osteochondral injury is a prevalent condition for which no specific treatment is currently available. This study presents a piezoelectric-conductive scaffold composed of a piezoelectric cartilage-decellularized extracellular matrix (dECM) and piezoelectric-conductive modified gelatin (Gel-PC). The piezoelectricity of the scaffold is achieved through the modification of diphenylalanine (FF) assembly on the pore surface, while the conductive properties of scaffold are achieved by the incorporating poly(3,4-ethylenedioxythiophene). In vitro experiments demonstrate that bone marrow mesenchymal stem cells (BMSCs) undergo biphasic division during differentiation. In vivo studies using a Parma pig model of osteochondral defects demonstrate that the piezoelectric-conductive scaffold exhibits superior reparative efficacy. Notably, the generation of electrical stimulation is linked to joint movement. During joint activity, mechanical forces compress the scaffold, leading to deformation and the subsequent generation of an electric potential difference. The positive charges accumulated on the upper layer of the scaffold attract BMSCs, promoting their migration to the upper layer and chondrogenic differentiation. Meanwhile, the negative charges in the lower layer induce the osteogenic differentiation of BMSCs. Overall, this piezoelectric-conducive scaffold provides a promising platform for the effective repair of osteochondral defects.

Advancing Scaffold-Assisted Modality for In Situ Osteochondral Regeneration: A Shift From Biodegradable to Bioadaptable

Over the decades, the management of osteochondral lesions remains a significant yet unmet medical challenge without curative solutions to date. Owing to the complex nature of osteochondral units with multi-tissues and multicellularity, and inherently divergent cellular turnover capacities, current clinical practices often fall short of robust and satisfactory repair efficacy. Alternative strategies, particularly tissue engineering assisted with biomaterial scaffolds, achieve considerable advances, with the emerging pursuit of a more cost-effective approach of in situ osteochondral regeneration, as evolving toward cell-free modalities. By leveraging endogenous cell sources and innate regenerative potential facilitated with instructive scaffolds, promising results are anticipated and being evidenced. Accordingly, a paradigm shift is occurring in scaffold development, from biodegradable and biocompatible to bioadaptable in spatiotemporal control. Hence, this review summarizes the ongoing progress in deploying bioadaptable criteria for scaffold-based engineering in endogenous osteochondral repair, with emphases on precise control over the scaffolding material, degradation, structure and biomechanics, and surface and biointerfacial characteristics, alongside their distinguished impact on the outcomes. Future outlooks of a highlight on advanced, frontier materials, technologies, and tools tailoring precision medicine and smart healthcare are provided, which potentially paves the path toward the ultimate goal of complete osteochondral regeneration with function restoration.

A bioactive composite scaffold enhances osteochondral repair by using thermosensitive chitosan hydrogel and endothelial lineage cell-derived chondrogenic cell

Articular cartilage regeneration is a major challenge in orthopedic medicine. Endothelial progenitor cells (EPCs) are a promising cell source for regenerative medicine applications. However, their roles and functions in cartilage regeneration are not well understood. Additionally, thermosensitive chitosan hydrogels have been widely used in tissue engineering, but further development of these hydrogels incorporating vascular lineage cells for cartilage repair is insufficient. Thus, this study aimed to characterize the ability of EPCs to undergo endothelial-mesenchymal stem cell transdifferentiation and chondrogenic differentiation and investigate the ability of chondrogenic EPC-seeded thermosensitive chitosan-graft-poly (N-isopropylacrylamide) (CEPC-CSPN) scaffolds to improve healing in a rabbit osteochondral defect (OCD) model. EPCs were isolated and endothelial-to-mesenchymal transition (EndMT) was induced by transforming growth factor-β1 (TGF-β1); these EPCs are subsequently termed transdifferentiated EPCs (tEPCs). The stem cell-like properties and chondrogenic potential of tEPCs were evaluated by a series of in vitro assays. Furthermore, the effect of CEPC-CSPN scaffolds on OCD repair was evaluated. Our in vitro results confirmed that treatment of EPC with TGF-β1 induced EndMT and the acquisition of stem cell-like properties, producing tEPCs. Upon inducing chondrogenic differentiation of tEPCs (CEPCs), the cells exhibited significantly enhanced chondrogenesis and chondrocyte surface markers after 25 days. The TGF-β1-induced differentiation of EPCs is mediated by both the TGF-β/Smad and extracellular signal-regulated kinase (Erk) pathways. The CEPC-CSPN scaffold reconstructed well-integrated translucent cartilage and repaired subchondral bone in vivo, exhibiting regenerative capacity. Collectively, our results suggest that the CEPC-CSPN scaffold induces OCD repair, representing a promising approach to articular cartilage regeneration.

Polysaccharide-protein based scaffolds for cartilage repair and regeneration

Cartilage repair and regeneration have become a global issue that millions of patients from all over the world need surgical intervention to repair the articular cartilage annually due to the limited self-healing capability of the cartilage tissues. Cartilage tissue engineering has gained significant attention in cartilage repair and regeneration by integration of the chondrocytes (or stem cells) and the artificial scaffolds. Recently, polysaccharide-protein based scaffolds have demonstrated unique and promising mechanical and biological properties as the artificial extracellular matrix of natural cartilage. In this review, we summarize the modification methods for polysaccharides and proteins. The preparation strategies for the polysaccharide-protein based hydrogel scaffolds are presented. We discuss the mechanical, physical and biological properties of the polysaccharide-protein based scaffolds. Potential clinical translation and challenges on the artificial scaffolds are also discussed.

3D Niche-Inspired Scaffolds as a Stem Cell Delivery System for the Regeneration of the Osteochondral Interface

The regeneration of the osteochondral unit represents a challenge due to the distinct cartilage and bone phases. Current strategies focus on the development of multiphasic scaffolds that recapitulate features of this complex unit and promote the differentiation of implanted bone-marrow derived stem cells (BMSCs). In doing so, challenges remain from the loss of stemness during in vitro expansion of the cells and the low control over stem cell activity at the interface with scaffolds in vitro and in vivo. Here, this work scaffolds inspired by the bone marrow niche that can recapitulate the natural healing process after injury. The construct comprises an internal depot of quiescent BMSCs, mimicking the bone marrow cavity, and an electrospun (ESP) capsule that "activates" the cells to migrate into an outer "differentiation-inducing" 3D printed unit functionalized with TGF-β and BMP-2 peptides. In vitro, niche-inspired scaffolds retained a depot of nonproliferative cells capable of migrating and proliferating through the ESP capsule. Invasion of the 3D printed cavity results in location-specific cell differentiation, mineralization, secretion of alkaline phosphatase (ALP) and glycosaminoglycans (GAGs), and genetic upregulation of collagen II and collagen I. In vivo, niche-inspired scaffolds are biocompatible, promoted tissue formation in rat subcutaneous models, and regeneration of the osteochondral unit in rabbit models.

Diatomite-incorporated hierarchical scaffolds for osteochondral regeneration

Osteochondral regeneration involves the highly challenging and complex reconstruction of cartilage and subchondral bone. Silicon (Si) ions play a crucial role in bone development. Current research on Si ions mainly focuses on bone repair, by using silicate bioceramics with complex ion compositions. However, it is unclear whether the Si ions have important effect on cartilage regeneration. Developing a scaffold that solely releases Si ions to simultaneously promote subchondral bone repair and stimulate cartilage regeneration is critically important. Diatomite (DE) is a natural diatomaceous sediment that can stably release Si ions, known for its abundant availability, low cost, and environmental friendliness. Herein, a hierarchical osteochondral repair scaffold is uniquely designed by incorporating gradient DE into GelMA hydrogel. The adding DE microparticles provides a specific Si source for controlled Si ions release, which not only promotes osteogenic differentiation of rBMSCs (rabbit bone marrow mesenchymal stem cells) but also enhances proliferation and maturation of chondrocytes. Moreover, DE-incorporated hierarchical scaffolds significantly promoted the regeneration of cartilage and subchondral bone. The study suggests the significant role of Si ions in promoting cartilage regeneration and solidifies their foundational role in enhancing bone repair. Furthermore, it offers an economic and eco-friendly strategy for developing high value-added osteochondral regenerative bioscaffolds from low-value ocean natural materials.

An Encapsulation-Free and Hierarchical Porous Triboelectric Scaffold with Dynamic Hydrophilicity for Efficient Cartilage Regeneration

Tissue engineering and electrotherapy are two promising methods to promote tissue repair. However, their integration remains an underexplored area, because their requirements on devices are usually distinct. Triboelectric nanogenerators (TENGs) have shown great potential to develop self-powered devices. However, due to their susceptibility to moisture, TENGs have to be encapsulated in vivo. Therefore, existing TENGs cannot be employed as tissue engineering scaffolds, which require direct interaction with surrounding cells. Here, the concept of triboelectric scaffolds (TESs) is proposed. Poly(glycerol sebacate), a biodegradable and relatively hydrophobic elastomer, is selected as the matrix of TESs. Each hydrophobic micropore in multi-hierarchical porous TESs efficiently serves as a moisture-resistant working unit of TENGs. Integration of tons of micropores ensures the electrotherapy ability of TESs in vivo without encapsulation. Originally hydrophobic TESs are degraded by surface erosion and transformed into hydrophilic surfaces, facilitating their role as tissue engineering scaffolds. Notably, TESs seeded with chondrocytes obtain dense and large matured cartilages after subcutaneous implantation in nude mice. Importantly, rabbits with osteochondral defects receiving TES implantation show favorable hyaline cartilage regeneration and complete cartilage healing. This work provides a promising electronic biomedical device and will inspire a series of new in vivo applications.

Inflammatory microenvironment regulation and osteogenesis promotion by bone-targeting calcium and magnesium repletion nanoplatform for osteoporosis therapy

Osteoporosis is the most common bone metabolic disease that affects the health of middle-aged and elderly people, which is hallmarked by imbalanced bone remodeling and a deteriorating immune microenvironment. Magnesium and calcium are pivotal matrix components that participate in the bone formation process, especially in the immune microenvironment regulation and bone remodeling stages. Nevertheless, how to potently deliver magnesium and calcium to bone tissue remains a challenge. Here, we have constructed a multifunctional nanoplatform composed of calcium-based upconversion nanoparticles and magnesium organic frameworks (CM-NH2-PAA-Ald, denoted as CMPA), which features bone-targeting and pH-responsive properties, effectively regulating the inflammatory microenvironment and promoting the coordination of osteogenic functions for treating osteoporosis. The nanoplatform can efficaciously target bone tissue and gradually degrade in response to the acidic microenvironment of osteoporosis to release magnesium and calcium ions. This study validates that CMPA possessing favorable biocompatibility can suppress inflammation and facilitate osteogenesis to treat osteoporosis. Importantly, high-throughput sequencing results demonstrate that the nanoplatform exerts a good inflammatory regulation effect through inhibition of the nuclear factor kappa-B signaling pathway, thereby normalizing the osteoporotic microenvironment. This collaborative therapeutic strategy that focuses on improving bone microenvironment and promoting osteogenesis provides new insight for the treatment of metabolic diseases such as osteoporosis.

Triple-Mechanism Enhanced Flexible SiO2 Nanofiber Composite Hydrogel with High Stiffness and Toughness for Cartilaginous Ligaments

Hydrogels are widely used in tissue engineering, soft robotics and wearable electronics. However, it is difficult to achieve both the required toughness and stiffness, which severely hampers their application as load-bearing materials. This study presents a strategy to develop a hard and tough composite hydrogel. Herein, flexible SiO2 nanofibers (SNF) are dispersed homogeneously in a polyvinyl alcohol (PVA) matrix using the synergistic effect of freeze-drying and annealing through the phase separation, the modulation of macromolecular chain movement and the promotion of macromolecular crystallization. When the stress is applied, the strong molecular interaction between PVA and SNF effectively disperses the load damage to the substrate. Freeze-dried and annealed-flexible SiO2 nanofibers/polyvinyl alcohol (FDA-SNF/PVA) reaches a preferred balance between enhanced stiffness (13.71 ± 0.28 MPa) and toughness (9.9 ± 0.4 MJ m-3). Besides, FDA-SNF/PVA hydrogel has a high tensile strength of 7.84 ± 0.10 MPa, super elasticity (no plastic deformation under 100 cycles of stretching), fast deformation recovery ability and excellent mechanical properties that are superior to the other tough PVA hydrogels, providing an effective way to optimize the mechanical properties of hydrogels for potential applications in artificial tendons and ligaments.

Enhanced osteochondral regeneration with a 3D-Printed biomimetic scaffold featuring a calcified interfacial layer

The integrative regeneration of both articular cartilage and subchondral bone remains an unmet clinical need due to the difficulties of mimicking spatial complexity in native osteochondral tissues for artificial implants. Layer-by-layer fabrication strategies, such as 3D printing, have emerged as a promising technology replicating the stratified zonal architecture and varying microstructures and mechanical properties. However, the dynamic and circulating physiological environments, such as mass transportation or cell migration, usually distort the pre-confined biological properties in the layered implants, leading to undistinguished spatial variations and subsequently inefficient regenerations. This study introduced a biomimetic calcified interfacial layer into the scaffold as a compact barrier between a cartilage layer and a subchondral bone layer to facilitate osteogenic-chondrogenic repair. The calcified interfacial layer consisting of compact polycaprolactone (PCL), nano-hydroxyapatite, and tasquinimod (TA) can physically and biologically separate the cartilage layer (TA-mixed, chondrocytes-load gelatin methacrylate) from the subchondral bond layer (porous PCL). This introduction preserved the as-designed independent biological environment in each layer for both cartilage and bone regeneration, successfully inhibiting vascular invasion into the cartilage layer and preventing hyaluronic cartilage calcification owing to devascularization of TA. The improved integrative regeneration of cartilage and subchondral bone was validated through gross examination, micro-computed tomography (micro-CT), and histological and immunohistochemical analyses based on an in vivo rat model. Moreover, gene and protein expression studies identified a key role of Caveolin (CAV-1) in promoting angiogenesis through the Wnt/β-catenin pathway and indicated that TA in the calcified layer blocked angiogenesis by inhibiting CAV-1.

Glycosphingolipids in Osteoarthritis and Cartilage-Regeneration Therapy: Mechanisms and Therapeutic Prospects Based on a Narrative Review of the Literature

Glycosphingolipids (GSLs), a subtype of glycolipids containing sphingosine, are critical components of vertebrate plasma membranes, playing a pivotal role in cellular signaling and interactions. In human articular cartilage in osteoarthritis (OA), GSL expression is known notably to decrease. This review focuses on the roles of gangliosides, a specific type of GSL, in cartilage degeneration and regeneration, emphasizing their regulatory function in signal transduction. The expression of gangliosides, whether endogenous or augmented exogenously, is regulated at the enzymatic level, targeting specific glycosyltransferases. This regulation has significant implications for the composition of cell-surface gangliosides and their impact on signal transduction in chondrocytes and progenitor cells. Different levels of ganglioside expression can influence signaling pathways in various ways, potentially affecting cell properties, including malignancy. Moreover, gene manipulations against gangliosides have been shown to regulate cartilage metabolisms and chondrocyte differentiation in vivo and in vitro. This review highlights the potential of targeting gangliosides in the development of therapeutic strategies for osteoarthritis and cartilage injury and addresses promising directions for future research and treatment.

Advances in Polysaccharides for Cartilage Tissue Engineering Repair: A Review

Cartilage repair has been a significant challenge in orthopedics that has not yet been fully resolved. Due to the absence of blood vessels and the almost cell-free nature of mature cartilage tissue, the limited ability to repair cartilage has resulted in significant socioeconomic pressures. Polysaccharide materials have recently been widely used for cartilage tissue repair due to their excellent cell loading, biocompatibility, and chemical modifiability. They also provide a suitable microenvironment for cartilage repair and regeneration. In this Review, we summarize the techniques used clinically for cartilage repair, focusing on polysaccharides, polysaccharides for cartilage repair, and the differences between these and other materials. In addition, we summarize the techniques of tissue engineering strategies for cartilage repair and provide an outlook on developing next-generation cartilage repair and regeneration materials from polysaccharides. This Review will provide theoretical guidance for developing polysaccharide-based cartilage repair and regeneration materials with clinical applications for cartilage tissue repair and regeneration.

Organic-inorganic composite hydrogels: compositions, properties, and applications in regenerative medicine

Hydrogels, formed from crosslinked hydrophilic macromolecules, provide a three-dimensional microenvironment that mimics the extracellular matrix. They served as scaffold materials in regenerative medicine with an ever-growing demand. However, hydrogels composed of only organic components may not fully meet the performance and functionalization requirements for various tissue defects. Composite hydrogels, containing inorganic components, have attracted tremendous attention due to their unique compositions and properties. Rigid inorganic particles, rods, fibers, etc., can form organic-inorganic composite hydrogels through physical interaction and chemical bonding with polymer chains, which can not only adjust strength and modulus, but also act as carriers of bioactive components, enhancing the properties and biological functions of the composite hydrogels. Notably, incorporating environmental or stimulus-responsive inorganic particles imparts smartness to hydrogels, hence providing a flexible diagnostic platform for in vitro cell culture and in vivo tissue regeneration. In this review, we discuss and compare a set of materials currently used for developing organic-inorganic composite hydrogels, including the modification strategies for organic and inorganic components and their unique contributions to regenerative medicine. Specific emphasis is placed on the interactions between the organic or inorganic components and the biological functions introduced by the inorganic components. The advantages of these composite hydrogels indicate their potential to offer adaptable and intelligent therapeutic solutions for diverse tissue repair demands within the realm of regenerative medicine.

Full-thickness osteochondral defect repair using a biodegradable bilayered scaffold of porous zinc and chondroitin sulfate hydrogel

The regeneration of osteochondral tissue necessitates the re-establishment of a gradient owing to the unique characteristics and healing potential of the chondral and osseous phases. As the self-healing capacity of hyaline cartilage is limited, timely mechanical support during neo-cartilage formation is crucial to achieving optimal repair efficacy. In this study, we devised a biodegradable bilayered scaffold, comprising chondroitin sulfate (CS) hydrogel to regenerate chondral tissue and a porous pure zinc (Zn) scaffold for regeneration of the underlying bone as mechanical support for the cartilage layer. The photocured CS hydrogel possessed a compressive strength of 82 kPa, while the porous pure Zn scaffold exhibited a yield strength of 11 MPa and a stiffness of 0.8 GPa. Such mechanical properties are similar to values reported for cancellous bone. In vitro biological experiments demonstrated that the bilayered scaffold displayed favorable cytocompatibility and promoted chondrogenic and osteogenic differentiation of bone marrow stem cells. Upon implantation, the scaffold facilitated the simultaneous regeneration of bone and cartilage tissue in a porcine model, resulting in (i) a smoother cartilage surface, (ii) more hyaline-like cartilage, and (iii) a superior integration into the adjacent host tissue. Our bilayered scaffold exhibits significant potential for clinical application in osteochondral regeneration.

Biosynthesis of Zinc Oxide Nanoparticles on l-Carnosine Biofunctionalized Polyacrylonitrile Nanofibers; a Biomimetic Wound Healing Material

Multifunctional biohybrid nanofibers (NFs) that can simultaneously drive various cellular activities and confer antibacterial properties are considered desirable in producing advanced wound healing materials. In this study, a bionanohybrid formulation was processed as a NF wound dressing to stimulate the adhesion and proliferation of fibroblast and endothelial cells that play a major role in wound healing. Polyacrylonitrile (PAN) electrospun NFs were hydrolyzed using NaOH and biofunctionalized with l-carnosine (CAR), a dipeptide which could later biosynthesize zinc oxide (ZnO) nanoparticles (NPs) on the NFs surface. The morphological study verified that ZnO NPs are uniformly distributed on the surface of CAR/PAN NFs. Through EDX and XRD analysis, it was validated that the NPs are composed of ZnO and/or ZnO/Zn(OH)2. The presence of CAR and ZnO NPs brought about a superhydrophilicity effect and notably raised the elastic modulus and tensile strength of Zn-CAR/PAN NFs. While CAR ligands were shown to improve the viability of fibroblast (L929) and endothelial (HUVEC) cells, ZnO NPs lowered the positive impact of CAR, most likely due to their repulsive negative surface charge. A scratch assay verified that CAR/PAN NFs and Zn-CAR/PAN NFs aided HUVEC migration more than PAN NFs. Also, an antibacterial assay implied that CAR/PAN NFs and Zn-CAR/PAN NFs are significantly more effective in inhibiting Staphylococcus aureus (S. aureus) than neat PAN NFs are (1000 and 500%, respectively). Taken together, compared to the neat PAN NFs, CAR/PAN NFs with and without the biosynthesized ZnO NPs can support the cellular activities of relevance for wound healing and inactivate bacteria.

MnO2 Decorated Metal-Organic Framework-Based Hydrogel Relieving Tumor Hypoxia for Enhanced Photodynamic Therapy

Photodynamic therapy (PDT) has emerged as a promising cancer treatment modality; however, its therapeutic efficacy is greatly limited by tumor hypoxia. In this study, a metal-organic framework (MOF)-based hydrogel (MOF Gel) system that synergistically combines PDT with the supply of oxygen is designed. Porphyrin-based Zr-MOF nanoparticles are synthesized as the photosensitizer. MnO2 is decorated onto the surface of the MOF, which can effectively convert H₂O₂ into oxygen. Simultaneously, the incorporation of MnO2 -decorated MOF (MnP NPs) into a chitosan hydrogel (MnP Gel) serves to enhance its stability and retention at the tumor site. The results show that this integrated approach significantly improves tumor inhibition efficiency by relieving tumor hypoxia and enhancing PDT. Overall, the findings underscore the potential for employing nano-MOF-based hydrogel systems as promising agents for cancer therapy, thus advancing the application of multifunctional MOFs in cancer treatment.

Integrated Piezoelectric/Conductive Composite Cryogel Creates Electroactive Microenvironment for Enhanced Bone Regeneration

Natural bone tissue possesses inherent electrophysiological characteristics, displaying conductivity and piezoelectricity simultaneously; hence, the reconstruction of local electrical microenvironment at defect site provides an effective strategy to enhance osteogenesis. Herein, a composite cryogel-type scaffold (referred to as Gel-PD-CMBT) is developed for bone regeneration, utilizing gelatin (Gel) in combination with a conductive poly(ethylene dioxythiophene)/polystyrene sulfonate matrix and Ca/Mn co-doped barium titanate (CMBT) nanofibers as the piezoelectric filler. The incorporation of these components results in the formation of an integrated piezoelectric/conductive network within the scaffold, facilitating charge migration and yielding a conductivity of 0.59 S cm-1 . This conductive scaffold creates a promising electroactive microenvironment, which is capable of up-regulating biological responses. Furthermore, the interconnected porous structure of the Gel-PD-CMBT scaffold not only provides mechanical stability but also offered ample space for cellular and tissue ingrowth. This Gel-PD-CMBT scaffold demonstrates a greater capacity to promote cellular osteogenic differentiation in vitro and neo-bone formation in vivo. In summary, the Gel-PD-CMBT scaffold, with its integrated piezoelectricity and conductivity, effectively restores the local electroactive microenvironment, offering an ideal platform for the regeneration of electrophysiological bone tissue.

Injectable, High Specific Surface Area Cryogel Microscaffolds Integrated with Osteoinductive Bioceramic Fibers for Enhanced Bone Regeneration

Organic-inorganic composites with high specific surface area and osteoinductivity provide a suitable microenvironment for cell ingrowth and effective ossification, which could greatly promote bone regeneration. Here, we report gelatin methacryloyl (GelMA) cryogel microspheres that are reinforced with hydroxyapatite (HA) nanowires and calcium silicate (CS) nanofibers to achieve the goal. The prepared composite cryogel microspheres with open porous structure and rough surface greatly facilitate cell anchoring, simultaneously exhibiting excellent injectability. Compared to the only HA- or CS-containing counterparts, the GelMA cryogel microspheres composited with HA:CS (termed as GMHC) achieve sustained release of bioactive Ca, P, and Si elements, which are conducive to osteogenic differentiation of bone marrow mesenchymal stromal cells (BMSCs). These composite microspheres can prevent from forming peralkalic conditions, which is beneficial for cell growth. After injection of cryogel microspheres into rat calvarial defects, neo-bone tissue grows into their pores, showing tight integration. The embedded bioceramic components significantly promote bone regeneration, with the GMHC achieving the best regenerative outcomes. Promisingly, porous organic-inorganic composite cryogel microspheres, with high specific surface area, biodegradability, and osteoinductivity, can act as injectable microscaffolds to repair bone defects with enhanced efficiency, which may widen the scaffold strategy for bone tissue engineering.