Principles of Design and Synthesis of Metal Derivatives from MOFs

Defective Metal-Organic Frameworks Confined PdO with High Resistance to Reduction: An Efficient Photocatalyst for Hydrodeoxygenation of Lignin Derivatives

The positively charged metal species in the supported catalyst is often highly active in various reactions, and stabilization of this state is vital for fabricating catalysts with long-term cycles, particularly under reducing reaction conditions. Herein, we propose a strategy to fabricate reduction-resistant PdO by constructing enhanced metal-support interaction (MSI) using subnanometer nodes in defective metal-organic framework (MOF). Specifically, a photo-induced way was developed to generate defected Zr6O8 nodes for enhanced MSI in nanoconfined space. The obtained Pd/defective-MOF composites not only stabilize PdO via an unsaturated Zr6O8 cluster for a long period under photoreducing conditions but also provide a driving force for substrate enrichment and proton transfer by -OH/-OH2 coordination, leading to a dramatically enhanced catalytic performance in the photocatalytic hydrodeoxygenation of lignin derivatives, which is 4.5 times that of Pd/ideal-MOF composites with weak MSI. This work provides ideas for the selection of ultrasmall support to stabilize positively charged metal and also an avenue to design photocatalysts with tightly connected heterogeneous in MOFs.

Machine Learning Relationships Between Nanoporous Structures and Electrochemical Performance in MOF Supercapacitors

The development of supercapacitors is impeded by the unclear relationships between nanoporous electrode structures and electrochemical performance, primarily due to challenges in decoupling the complex interdependencies of various structural descriptors. While machine learning (ML) techniques offer a promising solution, their application is hindered by the lack of large, unified databases. Herein, constant-potential molecular simulation is used to construct a unified supercapacitor database with hundreds of metal-organic framework (MOF) electrodes. Leveraging this database, well-trained decision-tree-based ML models achieve fast, accurate, and interpretable predictions of capacitance and charging rate, experimentally validated by a representative case. SHAP analyses reveal that specific surface area (SSA) governs gravimetric capacitance while pore size effects are minimal, attributed to the strong dependence of electrode-ion coordination on SSA rather than pore size. SSA and porosity, respectively, dominate volumetric capacitance in 1D-pore and 3D-pore MOFs, pinnacling the indispensable effects of pore dimensionality. Meanwhile, porosity is found to be the most decisive factor in the charging rate for both 1D-pore and 3D-pore MOFs. Especially for 3D-pore MOFs, an exponential increase in porosity is observed in both ionic conductance and in-pore ion diffusion coefficient, ascribed to loosened ion packing. These findings provide profound insights for the design of high-performance supercapacitor electrodes.

Enhancing strategies of MOFs-derived materials for microwave absorption: review and perspective

Microwave absorption materials (MAMs) gradually exhibit crucial applications in reducing electromagnetic wave (EMW) pollution, avoiding EMW information leakage, and solving radar stealth. Metal-organic frameworks (MOFs)-derived materials are flourishing in the domain of EMW absorption attributed to their especial structures, heteroatom doping and controllable components. Herein, various strategies to enhance the EMW absorption ability of MOFs-derived materials are outlined, covering structural design and compositional regulation. Additionally, the applications of MOFs-derived composites in EMW absorption domains are introduced in detail, with emphasis on recent progress in MOFs-derived composites materials like foams, films and aerogels. Finally, existent opportunities, challenges and future orientations of MOFs-derived MAMs are proposed.

MOF-Derived Transition Metal Phosphides for Supercapacitors

Transition metal phosphides (TMPs) in supercapacitors (SCs) applications are increasingly attracting attention because of their exceptional electrochemical performance. MOF-derived TMPs, possess high specific surface areas, rich pore structure, and controllable chemical compositions, offering promising opportunities for supercapacitor applications. There is a wide variety of MOF-derived TMPs, and they exhibit different properties in SCs. This work mainly categorizes MOF-derived TMPs (FexP, CoxP, NixP, NixCoyP, CuxP), and then outlines the latest research advancements regarding their use as electrode materials in SCs, including the latest results of synthesis methods and structural modulation. Subsequently, the applications of MOF-derived TMPs as electrode materials in SCs are discussed. At the end, perspectives of future developments and key challenges in the applications of MOF-derived TMPs in SCs are highlighted, with the aim of providing guidance for future research.

Yolk-Shell CoNi@N-Doped Carbon-CoNi@CNTs for Enhanced Microwave Absorption, Photothermal, Anti-Corrosion, and Antimicrobial Properties

The previous studies mainly focused on improving microwave absorbing (MA) performances of MA materials. Even so, these designed MA materials were very difficult to be employed in complex and changing environments owing to their single-functionalities. Herein, a combined Prussian blue analogues derived and catalytical chemical vapor deposition strategy was proposed to produce hierarchical cubic sea urchin-like yolk-shell CoNi@N-doped carbon (NC)-CoNi@carbon nanotubes (CNTs) mixed-dimensional multicomponent nanocomposites (MCNCs), which were composed of zero-dimensional CoNi nanoparticles, three-dimensional NC nanocubes and one-dimensional CNTs. Because of good impedance matching and attenuation characteristics, the designed CoNi@NC-CoNi@CNTs mixed-dimensional MCNCs exhibited excellent MA performances, which achieved a minimum reflection loss (RLmin) of -71.70 dB at 2.78 mm and Radar Cross section value of -53.23 dB m2. More importantly, the acquired results demonstrated that CoNi@NC-CoNi@CNTs MCNCs presented excellent photothermal, antimicrobial and anti-corrosion properties owing to their hierarchical cubic sea urchin-like yolk-shell structure, highlighting their potential multifunctional applications. It could be seen that this finding not only presented a generalizable route to produce hierarchical cubic sea urchin-like yolk-shell magnetic NC-CNTs-based mixed-dimensional MCNCs, but also provided an effective strategy to develop multifunctional MCNCs and improve their environmental adaptabilities.

Ultra-Wide Voltage Aqueous Superbatteries Enabled by Iron and Zinc Zeolitic Frameworks

Extensive research on supercapacitor-battery hybrid devices has bridged the gap between conventional batteries and supercapacitors. However, several challenges persist, including limited capacitance in the negative potential range, restricted rate capability, and a narrow potential window (<1.23 V) in aqueous electrolytes. Drawing inspiration from the notable benefits of bottom-up synthesis, which allows tailoring of structure and functionality through the selection of molecular components, we successfully synthesized an Fe-incorporated zeolitic imidazolate framework-8 (composed of Zn nodes and 2-methylimidazole linkers). Subsequently, the metal-organic framework was hydrothermally composited with graphene oxide in the presence of urea to prepare a dual metal oxide/N-doped reduced graphene oxide (DMO-NrGO) nanocomposite. Benefiting from the high hydrogen evolution overpotential of zinc-based compounds and the promising negative potential range activity of iron-based species, the lower potential limit of the X-ray confirmed crystalline-amorphous heterophase DMO-NrGO nanocomposite extends up to -1.45 V. It exhibits a specific capacity (capacitance) of 119 mA h g-1 (378 F g-1) at 1.0 A g-1 in 3.0 M KOH. Interestingly, the symmetric DMO-NrGO based superbattery device demonstrates an ultrawide voltage window of 1.95 V, with a superior specific energy of 28 W h kg-1 and an outstanding specific power of 29 kW kg-1 at 3.0 A g-1. The outstanding electrochemical performance can be attributed to the heterophase structure of the nanocomposite, which accommodates more active sites, provides additional ion transport channels, reduces phase-transformation resistance, and facilitates smooth electron transfer between metal oxides and graphene. This innovative synthetic strategy opens opportunities for developing high-performance aqueous energy storage devices.

Single-Atom Pt Loaded on MOF-Derived Porous TiO2 with Maxim-Ized Pt Atom Utilization for Selective Hydrogenation of Halonitro-benzene

The location control of single atoms relative to supports is challenging for single-atom catalysts, leading to a large proportion of inaccessible single atoms buried under supports. Herein, a "sequential thermal transition" strategy is developed to afford single-atom Pt preferentially dispersed on the outer surface of TiO2. Specifically, a Ti-MOF confining Pt nanoparticles is converted to PtNPs and TiO2 composite coated by carbon (PtNPs&TiO2@C-800) at 800 °C in N2. Subsequent thermal-driven atomization of PtNPs at 600 °C in air produce single-atom Pt decorated TiO2 (Pt1/TiO2-600). The resulting Pt1/TiO2-600 exhibits superior p-chloroaniline (p-CAN) selectivity (99 %) to PtNPs/TiO2-400 (45 %) and much better activity than Pt1@TiO2-600 with randomly dispersed Pt1 both outside and inside TiO2 in the hydrogenation of p-chloronitrobenzene (p-CNB). Mechanism investigations reveal that Pt1/TiO2-600 achieves 100 % accessibility of Pt1 and preferably adsorbs the -NO2 group of p-CNB while weakly adsorbs -Cl group of p-CNB and p-CAN, promoting catalytic activity and selectivity.

Inhalable Metal-Organic Frameworks: A Promising Delivery Platform for Pulmonary Diseases Treatment

Inhalation delivery, offering a direct pathway for administering drugs to the lungs in the form of dry powders or aerosols, stands out as an optimal approach for the localized treatment of pulmonary diseases. However, the intricate anatomical architecture of the lung often poses challenges in maintaining effective drug concentrations within the lungs over extended periods. This highlights the pressing need to develop rational inhalable drug delivery systems that can improve treatment outcomes for respiratory diseases. Metal-organic frameworks (MOFs) assembled from inorganic metal ions and organic ligands, characterized by customizable porous architecture and chemical composition, modifiable porosity, vast surface area, straightforward surface modification, and adjustable biocompatibility, have garnered extensive attention in the biomedical sphere. The introduction of MOFs into inhalation therapy represents a promising avenue to navigate past the hurdles associated with traditional inhalation methods. Therefore, this review summarizes the characteristics of inhalation delivery together with the latest advances, challenges, and opportunities in utilizing inhalable MOFs for treating lung diseases and discusses prospects in this field alongside the potential pathways for translating this strategy into clinic.

Controllable Strategy of Metal-Organic Framework Structural Stability: Regulation of Ligand Electronegativity by Esterification

Structural stability of metal-organic framework (MOF) is crucial for their application, and thus it is of great significance to construct MOFs with controllable structural stability. Herein, a strategy based on adjusting the electronic environment of ligands to regulate the structure stability of MOF is proposed. Briefly, a novel Zr-MOF (Zr-TA) with hydroxyl groups is synthesized. The hydroxyl groups are esterified to obtain ester groups with stronger electronegativity, which can weaken the strength of coordination between metal ion and ligand, thereby regulating the structure stability of the Zr-MOF. Notably, this strategy can achieve controllable adjustment of the structure by adding modifiers at the appropriate time. In this work, this strategy is used to greatly improving the binding ability of MOF and collagen fibers, the hydrothermal stability of crosslinked collagen fibers is enhanced by 82.6%. Surprisingly, this strategy can also be applied to other application fields that require dynamic changes in structural stability of MOF. It will open up a new pathway for controlling the structural stability and application performance of MOF.

Recent Advancements in Electrochemical Sensors Based on MOFs and Their Derivatives

Metal-organic frameworks (MOFs) are composed of metal nodes and organic linkers that can self-assemble into an infinite network. The high porosity and large surface area of MOFs facilitate the effective enrichment and mass transfer of analytes, which can enhance the signal response and improve the sensitivity of electrochemical sensors. Additionally, MOFs and their derivatives possess the properties of unsaturated metal sites and tunable structures, collectively demonstrating their potential for electrochemical sensing. This paper summarizes the preparation methods, structural properties, and applications of MOFs and their derivatives in electrochemical sensing, emphasizing sensors' selectivity and sensitivity from the perspectives of direct and indirect detection. Additionally, it also explores future directions and prospects for MOFs in electrochemical sensing, with the aim of overcoming current limitations through innovative approaches.

Enhancing Zinc-Air Flow Batteries: Single-Atom Catalysis within Cobalt-Encapsulated Carbon Nanotubes for Superior Efficiency

Amid the world's escalating energy needs, rechargeable zinc-air batteries stand out because of their environmental sustainability, with their performance being critically dependent on the oxygen reduction reaction (ORR). The inherent slow kinetics of the ORR at air electrodes frequently constrains their operational efficiency. Here, we develop a new self-catalytic approach for in situ growth of carbon nanotubes with new cathode material Co@CoN3/CNTs-800 without external additives. Density functional theory calculation reveals this method integrates nonprecious single-atom catalysis with spatial confinement, facilitating large-scale, in situ fabrication of CNTs, which can support dispersed atomic CoN3 sites and enforce spatial confinement on Co nanoparticles. The Co@CoN3/CNTs-800 electrode achieves an electron transfer number close to ideal (3.9 out of 4.0). In rechargeable zinc-air flow batteries, it achieves a peak power density of 169.5 mW cm-2 and a voltage gap that is only 1.6% larger than the original after 700 h. This work surmounts critical challenges in the ORR kinetics for zinc-air batteries.

Unveiling the potential of MOF-based single-atom photocatalysts for the production of clean fuel and valuable chemical

Harnessing solar energy through photocatalysis has excellent potential for powering sustainable chemical production, supporting the United Nations' environmental goals. Single-atoms (SAs) dispersed on catalyst surfaces are gaining attention for their highly active and durable nature. Metal-organic frameworks (MOFs) can provide enough reactive sites to sustain selectivity and durability over time because of their tunable channels and functional groups. Owing to their organized structures, MOFs are ideal platforms for securing individual atoms and promoting solar-driven reactions. Few reviews have, however, reflected the possibility of combining MOFs and SAs to produce potent photocatalysts that may produce clean fuels and valuable chemicals. This review provides a general overview of methods for combining MOFs and SAs to generate photocatalysts. The challenges associated with these MOF-based single-atom systems are also critically examined. Their future development is discussed as continued refinement helps to more fully leverage their advantages for boosting photocatalytic performances - turning sunlight into chemicals in a manner that supports sustainable development. Insights gained here could illuminate pathways toward realizing the profound potential of MOF-based single-atom photocatalysts to empower production driven by renewable solar energy.

Unveiling the scope and perspectives of MOF-derived materials for cutting-edge applications

Although synthesis and design of MOFs are crucial factors to the successful implementation of targeted applications, there is still lack of knowledge among researchers about the synthesis of MOFs and their derived composites for practical applications. For example, many researchers manipulate study results, and it has become quite difficult to quit this habit specifically among the young researchers Undoubtedly, MOFs have become an excellent class of compounds but there are many challenges associated with their improvement to attain diverse applications. It has been noted that MOF-derived materials have gained considerable interest owing to their unique chemical properties. These compounds have exhibited excellent potential in various sectors such as energy, catalysis, sensing and environmental applications. It is worth mentioning that most of the researchers rely on commercially available MOFs for use as precursor supports, but it is an unethical and wrong practice because it prevents the exploration of the hidden diversity of similar materials. The reported studies have significant gaps and flaws, they do not have enough details about the exact parameters used for the synthesis of MOFs and their derived materials. For example, many young researchers claim that MOF-based materials cannot be synthesized as per the reported instructions for large-scale implementation. In this regard, current article provides a comprehensive review of the most recent advancements in the design of MOF-derived materials. The methodologies and applications have been evaluated together with their advantages and drawbacks. Additionally, this review suggests important precautions and solutions to overcome the drawbacks associated with their preparation. Applications of MOF-derived materials in the fields of energy, catalysis, sensing and environment have been discussed. No doubt, these materials have become excellent class but there are still many challenges ahead to specify it for the targeted applications.

Rise of Metal-Organic Frameworks: From Synthesis to E-Skin and Artificial Intelligence

Metal-organic frameworks (MOFs) have attained broad research attention in the areas of sensors, resistive memories, and optoelectronic synapses on the merits of their intriguing physical and chemical properties. In this review, recent progress on the synthesis of MOFs and their electronic applications is introduced and discussed. Initially, the crystal structures and properties of MOFs encompassing optical, electrical, and chemical properties are discussed in brief. Subsequently, advanced synthesis methods for MOFs are introduced, categorized into hydrothermal approach, microwave synthesis, mechanochemical synthesis, and electrochemical deposition. After that, the various roles of MOFs in widespread applications, including sensing, information storage, optoelectronic synapses, machine learning, and artificial intelligence, are discussed, highlighting their versatility and the innovative solutions they provide to long-standing challenges. Finally, an outlook on remaining challenges and a future perspective for MOFs are proposed.

One-Pot Etching Pyrolysis to Defect-Rich Carbon Nanosheets to Construct Multiheteroatom-Coordinated Iron Sites for Efficient Oxygen Reduction

Constructing multiheteroatom coordination structure in carbonaceous substrates demonstrates an effective method to accelerate the oxygen reduction reaction (ORR) of supported single-atom catalyst. Herein, the novel etching route assisted by potassium thiocyanate (KCNS) is developed to convert metal-organic framework to 2D defect-rich porous N,S-co-doped carbon nanosheets for anchoring atomically dispersed iron sites as the high-performance ORR catalysts (Fe-SACs). The well-designed KCNS-assisted etching route can generate spatial confinement template to direct the carbon nanosheet formation, etching condition to form defect-rich structure, and additional sulfur atoms to coordinate iron species. Spectral and microscopy analysis reveals that the iron element in Fe-SACs is highly isolated on carbon nanosheet and anchored by nitrogen and sulfur atoms in unsymmetrical Fe-S1N3 structure. The optimized Fe-SACs with large specific surface area could show remarkable alkaline ORR performances with a high half-wave potential of 0.920 V versus RHE and excellent durability. The rechargeable zinc-air battery assembled with Fe-SACs air electrodes delivers a large power density of 350 mW cm-2 and a stable voltage platform during charge and discharge over more than 1300 h. This work proposes a novel strategy for the preparation of single-atom catalysts with multiheteroatom coordination structure and highly exposed active sites for efficient ORR.

Al-Based MOF-Derived Amorphous/Crystalline Heterophase Cobalt Sulfides as High-Performance Supercapacitor Materials

Transition metal sulfides (TMSs) are promising electrode materials due to their high theoretical specific capacitance, but sluggish charge transfer kinetics and an insufficient number of active sites hamper their applications in supercapacitors. In this work, a self-sacrificial template strategy was employed to construct Al-based MOF-derived metal sulfides with an amorphous/crystalline (a/c) heterophase, in which aluminum, nitrogen, and carbon species were evenly coordinated in the amorphous phase. The metal sulfides a/c-Co(Al)S-1 and a/c-Co(Al)S-2, originating from the CAU-1 and CoAl-MOF on NF as self-sacrificial templates, were investigated as electrode materials, respectively, in which the a/c-Co(Al)S-1 showed a more excellent electrochemical performance. Through acid etching CAU-1 using Co(NO3)2 followed by sulfuration, the a/c-Co(Al)S-1 with a unique 3D network structure was constructed, whose unique architecture expanded the interfacial contact with the electrolyte and provided vast active sites, accelerating the charge transportation and ion diffusion. Notably, the a/c-Co(Al)S-1 displayed a high specific charge of 1791.8 C g-1 at 1 A g-1, satisfactory cycle stability, and good rate capability. The corresponding assembled a/c-Co(Al)S-1//AC device delivered a high energy density of 77.1 Wh kg-1 at 800 W kg-1 and good durability (87.4% capacitance retention over 10 000 cycles).

Hierarchically Ordered Pore Engineering of Metal-Organic Framework-Based Materials for Electrocatalysis

Ordered pore engineering that embeds uniform pores with periodic alignment in electrocatalysts opens up a new avenue for achieving further performance promotion. Hierarchically ordered porous metal-organic frameworks (HOP-MOFs) possessing multilevel pores with ordered distribution are the promising precursors for the exploration of ordered porous electrocatalysts, while the scalable acquisition of HOP-MOFs with editable components and adjustable pore size regimes is critical. This review presents recent progress on hierarchically ordered pore engineering of MOF-based materials for enhanced electrocatalysis. The synthetic strategies of HOP-MOFs with different pore size regimes, including the self-assembly guided by reticular chemistry, surfactant, nanoemulsion, and nanocasting, are first introduced. Then the applications of HOP-MOFs as the precursors for exploring hierarchically ordered porous electrocatalysts are summarized, selecting representatives to highlight the boosted performance. Especially, the intensification of molecule and ion transport integrated with optimized electron transfer and site exposure over the hierarchically ordered porous derivatives are emphasized to clarify the directional transfer and integration effect endowed by ordered pore engineering. Finally, the remaining scientific challenges and an outlook of this field are proposed. It is hoped that this review will guide the hierarchically ordered pore engineering of nanocatalysts for boosting the catalytic performance and promoting the practical applications.

Stabilizing Ni2+ in Hollow Nano MOF/Polymetallic Phosphides Composites for Enhanced Electrochemical Performance in 3D-Printed Micro-Supercapacitors

Polymetallic phosphides exhibit favorable conductivities. A reasonable design of nano-metal-organic frame (MOF) composite morphologies and in situ introduction of polymetallic phosphides into the framework can effectively improve electrolyte penetration and rapid electron transfer. To address existing challenges, Ni, with a strong coordination ability with N, is introduced to partially replace Co in nano-Co-MOF composite. The hollow nanostructure is stabilized through CoNi bimetallic coordination and low-temperature controllable polymetallic phosphide generation rate. The Ni, Co, and P atoms, generated during reduction, effectively enhance electron transfer rate within the framework. X-ray absorption fine structure (XAFS) characterization results further confirm the existence of Ni-N, Ni-Ni, and Co-Co structures in the nanocomposite. The changes in each component during the charge-discharge process of the electrochemical reactions are investigated using in situ X-ray diffraction (XRD). Theoretical calculations further confirm that P can effectively improve conductivity. VZNPGC//MXene MSCs, constructed with active materials derived from the hollow nano MOF composites synthesized through the Ni2+ stabilization strategy, demonstrate a specific capacitance of 1184 mF cm-2, along with an energy density of 236.75 µWh cm-2 (power density of 0.14 mW cm-2). This approach introduces a new direction for the synthesis of highly conductive nano-MOF composites.

Tailoring Cu-Based Electrocatalysts for Enhanced Electrochemical CO2 Reduction to Alcohols: Structure-Selectivity Relationship

The use of CO2 as a feedstock for the production of carbon-based fuels and value-added chemicals offers a promising route toward carbon neutrality. In this study, two Cu-based electrocatalysts, namely, Cu24/N-C and Cu2/N-C, are successfully prepared by thermal treatment of Cu24 metal-organic polyhedron-loaded zeolitic imidazolate framework-8 (ZIF-8) nanocrystals (Cu24/ZIF-8) and Cu2 dinuclear compound-loaded ZIF-8 nanocrystals (Cu2/ZIF-8), respectively. Extensive structural and compositional analyses were conducted to confirm the formation of Cu nanocluster-loaded N-doped porous carbon supports in both Cu24/N-C and Cu2/N-C and Cu nanoparticles encapsulated by graphitic carbons in Cu2/N-C as well. These two Cu-based electrocatalysts exhibited different behaviors in the electrochemical CO2 reduction reaction (CO2RR). The Cu24/N-C electrocatalyst showed high selectivity for CO production, while Cu2/N-C showed a preference for alcohol generation. The excellent stability of Cu2/N-C over a 30 h continuous electrochemical reduction further highlights its potential for practical applications. The difference in electrocatalytic performance observed in the two catalysts for CO2RR was attributed to distinct catalytic sites associated with Cu nanoclusters and nanoparticles. This research reveals the significance of their structures and compositions for the development of highly selective electrocatalysts for CO2 reduction.

Unveiling the effect of the structural transformation of CoZn-MOF on BiVO4 photoanode for efficient photoelectrochemical water oxidation

Photoelectrochemical (PEC) water splitting has been widely investigated for solar-to-hydrogen conversion. However, issues like high charge recombination rate and slow surface water oxidation kinetics severely hinder its (PEC) conversion efficiency. Herein, we constructed MOF-derived CoOOH cocatalyst on BiVO4 photoanode, using a feasible electrochemical activation strategy. The BiVO4-based photoanode obtained shows a high photocurrent density of 3.15 mA/cm2 at 1.23 VRHE and low onset potential. Detailed experiments and theoretical calculations show that during the activation of CoZn-MOFs, there was a partial breakage of 2-methylimidazole (mIM) linker, an increase in the oxidation state of Cobalt ion (Co), and increased O2-. The high PEC performance is mainly attributed to the MOF-derived CoOOH, which provides rich active sites for hole extraction and reduces the overpotential for oxygen evolution reaction. Furthermore, when CoZnNiFe-LDHs were decorated on BiVO4 using the ions exchange method, the photocurrent density of BiVO4/CoZnNiFe-LDHs photoanode got to 4.0 mA/cm2 at 1.23 VRHE, accompanied with high stability. This study provides insights into understanding the key role played by the structural transformation of MOF cocatalyst in PEC water splitting processes.

Multiarmed DNA jumper and metal-organic frameworks-functionalized paper-based bioplatform for small extracellular vesicle-derived miRNAs assay

Small extracellular vesicle-derived microRNAs (sEV-miRNAs) have emerged as promising noninvasive biomarkers for early cancer diagnosis. Herein, we developed a molecular probe based on three-dimensional (3D) multiarmed DNA tetrahedral jumpers (mDNA-Js)-assisted DNAzyme activated by Na+, combined with a disposable paper-based electrode modified with a Zr-MOF-rGO-Au NP nanocomplex (ZrGA) to fabricate a novel biosensor for sEV-miRNAs Assay. Zr-MOF tightly wrapped by rGO was prepared via a one-step method, and it effectively aids electron transfer and maximizes the effective reaction area. In addition, the mechanically rigid, and nanoscale-addressable mDNA-Js assembled from the bottom up ensure the distance and orientation between fixed biological probes as well as avoid probe entanglement, considerably improving the efficiency of molecular hybridization. The fabricated bioplatform achieved the sensitive detection of sEV-miR-21 with a detection limit of 34.6 aM and a dynamic range from100 aM to 0.2 µM. In clinical blood sample tests, the proposed bioplatform showed results highly consistent with those of qRT-PCRs and the signal increased proportionally with the NSCLC staging. The proposed biosensor with a portable wireless USB-type analyzer is promising for the fast, easy, low-cost, and highly sensitive detection of various nucleic acids and their mutation derivatives, making it ideal for POC biosensing.

Metal-Organic Frameworks-Derived Nanocarbon Materials and Nanometal Oxides for Photocatalytic Applications

Harnessing low-density solar energy and converting it into high-density chemical energy through photocatalysis has emerged as a promising avenue for the production of chemicals and remediation of environmental pollution, which contributes to alleviating the overreliance on fossil fuels. In recent years, metal-organic frameworks (MOFs) have gained widespread application in the field of photocatalysis due to their photostability, tunable structures, and responsiveness in the visible light range. However, most MOFs exhibit relatively low response to light, limiting their practical applications. MOFs-derived nanomaterials not only retain the inherent advantages of pristine MOFs but also show enhanced light adsorption and responsiveness. This review categorizes and summarizes MOFs-derived nanomaterials, including nanocarbons and nanometal oxides, providing representative examples for the synthetic strategies of each category. Subsequently, the recent research progress on MOFs-derived materials in photocatalytic applications are systematically introduced, specifically in the areas of photocatalytic water splitting to H2, photocatalytic CO2 reduction, and photocatalytic water treatment. The corresponding mechanisms involved in each photocatalytic reaction are elaborated in detail. Finally, the review discusses the challenges and further directions faced by MOFs-derived nanomaterials in the field of photocatalysis, highlighting their potential role in advancing sustainable energy production and environmental remediation.

Bimetallic Copper-Cerium-Based Metal-Organic Frameworks for Selective Carbon Dioxide Capture

Metal-organic frameworks (MOFs) are highly regarded as valuable adsorbent materials in materials science, particularly in the field of CO2 capture. While numerous single-metal-based MOFs have demonstrated exceptional CO2 adsorption capabilities, recent advancements have explored the potential of bimetallic MOFs for enhanced performance. In this study, a CuCe-BTC MOF was synthesized through a straightforward hydrothermal method, and its improved properties, such as high surface area, smaller pore size, and larger pore volume, were compared with those of the bare Ce-BTC. The impact of the Cu/Ce ratio (1:4, 1:2, 1:1, and 3:2) was systematically investigated to understand how adding a second metal influences the CO2 adsorption performance of the Ce-BTC MOF. Various characterization techniques, including scanning electron microscopy, transmission electron microscopy, powder X-ray diffraction, thermogravimetric analysis, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and N2 BET surface area analysis, were employed to assess the physical and chemical properties of the bare Ce-BTC and CuCe-BTC samples. Notably, CuCe-BTC-1:2 exhibited superior surface area (133 m2 g-1), small pore size (3.3 nm), and large pore volume (0.14 cm3 g-1) compared to the monometallic Ce-BTC. Furthermore, CuCe-BTC-1:2 demonstrated a superior CO2 adsorption capacity (0.74 mmol g-1), long-term stability, and good CO2/N2 selectivity. This research provides valuable insights into the design of metal-BTC frameworks and elucidates how introducing a second metal enhances the properties of the monometallic Ce-BTC-MOF, leading to improved CO2 capture performance.

Interfacial Engineering of Heterogeneous Reactions for MOF-on-MOF Heterostructures

Metal-organic frameworks (MOFs), as a subclass of porous crystalline materials with unique structures and multifunctional properties, play a pivotal role in various research domains. In recent years, significant attention has been directed toward composite materials based on MOFs, particularly MOF-on-MOF heterostructures. Compared to individual MOF materials, MOF-on-MOF structures harness the distinctive attributes of two or more different MOFs, enabling synergistic effects and allowing for the tailored design of diverse multilayered architectures to expand their application scope. However, the rational design and facile synthesis of MOF-on-MOF composite materials are in principle challenging due to the structural diversity and the intricate interfaces. Hence, this review primarily focuses on elucidating the factors that influence their interfacial growth, with a specific emphasis on the interfacial engineering of heterogeneous reactions, in which MOF-on-MOF hybrids can be conveniently obtained by using pre-fabricated MOF precursors. These factors are categorized as internal and external elements, encompassing inorganic metals, organic ligands, lattice matching, nucleation kinetics, thermodynamics, etc. Meanwhile, these intriguing MOF-on-MOF materials offer a wide range of advantages in various application fields, such as adsorption, separation, catalysis, and energy-related applications. Finally, this review highlights current complexities and challenges while providing a forward-looking perspective on future research directions.

Metal-Organic Framework-Based Materials for Advanced Sodium Storage: Development and Anticipation

As a pioneering battery technology, even though sodium-ion batteries (SIBs) are safe, non-flammable, and capable of exhibiting better temperature endurance performance than lithium-ion batteries (LIBs), because of lower energy density and larger ionic size, they are not amicable for large-scale applications. Generally, the electrochemical storage performance of a secondary battery can be improved by monitoring the composition and morphology of electrode materials. Because more is the intricacy of a nanostructured composite electrode material, more electrochemical storage applications would be expected. Despite the conventional methods suitable for practical production, the synthesis of metal-organic frameworks (MOFs) would offer enormous opportunities for next-generation battery applications by delicately systematizing the structure and composition at the molecular level to store sodium ions with larger sizes compared with lithium ions. Here, the review comprehensively discusses the progress of nanostructured MOFs and their derivatives applied as negative and positive electrode materials for effective sodium storage in SIBs. The commercialization goal has prompted the development of MOFs and their derivatives as electrode materials, before which the synthesis and mechanism for MOF-based SIB electrodes with improved sodium storage performance are systematically discussed. Finally, the existing challenges, possible perspectives, and future opportunities will be anticipated.

Recent Progress on Nickel- and Iron-Based Metallic Organic Frameworks for Oxygen Evolution Reaction: A Review

Developing sustainable energy solutions to safeguard the environment is a critical ongoing demand. Electrochemical water splitting (EWS) is a green approach to create effective and long-lasting electrocatalysts for the water oxidation process. Metal organic frameworks (MOFs) have become commonly utilized materials in recent years because of their distinguishing pore architectures, metal nodes easy accessibility, large specific surface areas, shape, and adaptable function. This review outlines the most significant developments in current work on developing improved MOFs for enhancing EWS. The benefits and drawbacks of MOFs are first discussed in this review. Then, some cutting-edge methods for successfully modifying MOFs are also highlighted. Recent progress on nickel (Ni) and iron (Fe) based MOFs have been critically discussed. Finally, a comprehensive analysis of the existing challenges and prospects for Ni- and Fe-based MOFs are summarized.

Chemical Redox Cycling in an Organic Photoelectrochemical Transistor: Toward Dual Chemical and Electronic Amplification for Bioanalysis

The organic photoelectrochemical transistor (OPECT) has been proven to be a promising platform to study the rich light-matter-bio interplay toward advanced biomolecular detection, yet current OPECT is highly restrained to its intrinsic electronic amplification. Herein, this work first combines chemical amplification with electronic amplification in OPECT for dual-amplified bioanalytics with high current gain, which is exemplified by human immunoglobulin G (HIgG)-dependent sandwich immunorecognition and subsequent alkaline phosphatase (ALP)-mediated chemical redox cycling (CRC) on a metal-organic framework (MOF)-derived BiVO4/WO3 gate. The target-dependent redox cycling of ascorbic acid (AA) acting as an effective electron donor could lead to an amplified modulation against the polymer channel, as indicated by the channel current. The as-developed bioanalysis could achieve sensitive HIgG detection with a good analytical performance. This work features the dual chemical and electronic amplification for OPECT bioanalysis and is expected to stimulate further interest in the design of CRC-assisted OPECT bioassays.

Enhanced Active Sites and Stability in Nano-MOFs for Electrochemical Energy Storage through Dual Regulation by Tannic Acid

The limited active sites and poor acid-alkaline solution stability of metal-organic frameworks (MOFs), significantly limit their wider application. In this study, the acid property of tannic acid (TA) was used as an etchant to etch the surface-active sites. Subsequently, the further chelation of the protonated TA with the exposed metal active site can effectively protect the metal ions. Meanwhile, the TA provided a large amount of phenolic hydroxyl groups, which can greatly improve the stability of imidazolate-coordinated MOFs. The electrochemical test results indicated that the MOFs composite materials synthesized using this scheme had high specific capacitance and stability. And the mechanism of its electrochemical reaction process was explored through in situ X-ray diffraction (XRD) and theoretical calculations. In addition, the same treatment was carried out through a series of carboxyl-coordinated MOFs, which further confirmed the principle of this scheme to obtain a higher active site and stability. This paper explains the mechanism of functionalization of nano-MOFs by polyphenolic compounds, providing new ideas for the research of nano-MOFs.

Abundant Surface Defects in Cobalt Hydroxides/Oxyhydroxides Induced by Zinc Species Facilitate Water Oxidation

The complex process of the anodic oxygen evolution reaction (OER) severely hinders overall water splitting, which further limits the large-scale production and application of hydrogen energy. In this work, one type of bimetallic coordination polymer of ZnCoBTC using the MOF-on-MOF strategy has been synthesized where both Co(II) and Zn(II) cations exhibit the same coordination environment. By applying an electric potential, the predesigned bimetallic MOF precursor can be conveniently degraded into CoOxHy as an active species for efficient OER. Owing to the dissolution of ZnOxHy species, in situ formed disordered defects on the external surface of the catalyst increase the specific surface area as well as expose abundant active materials. Therefore, the ZnCoOxHy nanosheet shows excellent OER performance and reaches an overpotential of only 334 mV at 10 mA cm-2 with a Tafel slope of 66.4 mV dec-1, indicating fast reaction kinetics. The results demonstrate that metals with the same coordination environment can undergo in situ replacement or secondary growth on the pristine MOF, and they can be electrochemically degraded into highly efficient catalysts for future energy applications.

Hierarchical Mesoporous Metal-Organic Frameworks with Boric Acid Sites on the Inner Surface of Small Mesopores for the Extraction of Nucleotides in Human Plasma Samples

In this work, a boronate affinity-functionalized hierarchical mesoporous metal-organic framework adsorbent with boronate sites only in the small mesopore has been structured based on UiO-66@Fe₃O₄. The introduction of large mesopores in the adsorbent can promote the diffusion of small cis-diol-containing compounds (cis-diols) into small mesopore channels, and the removal of the adsorption sites on the external surface of materials and in large mesopores can enhance the size-exclusion effect of the adsorbent. In addition, the adsorbent has faster adsorption kinetics and excellent selectivity to small cis-diols. Finally, a magnetic dispersive solid-phase extraction coupled with high-performance liquid chromatography was established for the enrichment and detection of nucleotides in plasma. Four nucleotides achieve the recoveries from 93.25 to 118.79%, the limits of detection from 0.35 to 1.26 ng·mL^-1, and the intra-day and inter-day relative standard deviations of less than 10.2%. In conclusion, this method can be directly used for the detection of small cis-diol targets in complex biological samples without protein precipitation prior to the extraction.