Feeble Single-Atom Pd Catalysts for H2 Production from Formic Acid

Single-atom catalysts are thought to be the pinnacle of catalysis. However, for many reactions, their suitability has yet to be unequivocally proven. Here, we demonstrate why single Pd atoms (PdSA) are not catalytically ideal for generating H2 from formic acid as a H2 carrier. We loaded PdSA on three silica substrates, mesoporous silicas functionalized with thiol, amine, and dithiocarbamate functional groups. The Pd catalytic activity on amino-functionalized silica (SiO2-NH2/PdSA) was far higher than that of the thiol-based catalysts (SiO2-S-PdSA and SiO2-NHCS2-PdSA), while the single-atom stability of SiO2-NH2/PdSA against aggregation after the first catalytic cycle was the weakest. In this case, Pd aggregation boosted the reaction yield. Our experiments and calculations demonstrate that PdSA in SiO2-NH2/PdSA loosely binds with amine groups. This leads to a limited charge transfer from Pd to the amine groups and causes high aggregability and catalytic activity. According to the density functional calculations, the loose binding between Pd and N causes most of Pd's 4d electrons in amino-functionalized SiO2 to remain close to the Fermi level and labile for catalysis. However, PdSA chemically binds to the thiol group, resulting in strong hybridization between Pd and S, pulling Pd's 4d states deeper into the conduction band and away from the Fermi level. Consequently, fewer 4d electrons were available for catalysis.

Metal-Support Interaction between Titanium Oxynitride and Pt Nanoparticles Enables Efficient Low-Pt-Loaded High-Performance Electrodes at Relevant Oxygen Reduction Reaction Current Densities

In the present work, we report on a synergistic relationship between platinum nanoparticles and a titanium oxynitride support (TiOxNy/C) in the context of oxygen reduction reaction (ORR) catalysis. As demonstrated herein, this composite configuration results in significantly improved electrocatalytic activity toward the ORR relative to platinum dispersed on carbon support (Pt/C) at high overpotentials. Specifically, the ORR performance was assessed under an elevated mass transport regime using the modified floating electrode configuration, which enabled us to pursue the reaction closer to PEMFC-relevant current densities. A comprehensive investigation attributes the ORR performance increase to a strong interaction between platinum and the TiOxNy/C support. In particular, according to the generated strain maps obtained via scanning transmission electron microscopy (STEM), the Pt-TiOxNy/C analogue exhibits a more localized strain in Pt nanoparticles in comparison to that in the Pt/C sample. The altered Pt structure could explain the measured ORR activity trend via the d-band theory, which lowers the platinum surface coverage with ORR intermediates. In terms of the Pt particle size effect, our observation presents an anomaly as the Pt-TiOxNy/C analogue, despite having almost two times smaller nanoparticles (2.9 nm) compared to the Pt/C benchmark (4.8 nm), manifests higher specific activity. This provides a promising strategy to further lower the Pt loading and increase the ECSA without sacrificing the catalytic activity under fuel cell-relevant potentials. Apart from the ORR, the platinum-TiOxNy/C interaction is of a sufficient magnitude not to follow the typical particle size effect also in the context of other reactions such as CO stripping, hydrogen oxidation reaction, and water discharge. The trend for the latter is ascribed to the lower oxophilicity of Pt-based on electrochemical surface coverage analysis. Namely, a lower surface coverage with oxygenated species is found for the Pt-TiOxNy/C analogue. Further insights were provided by performing a detailed STEM characterization via the identical location mode (IL-STEM) in particular, via 4DSTEM acquisition. This disclosed that Pt particles are partially encapsulated within a thin layer of TiOxNy origin.

Insight into Controllable Metal-Support Interactions in Metal/Metal Electrocatalysts for Efficient Energy-Saving Hydrogen Production

Controllable metal-support interaction (MSI) modulations have long been studied for improving the performance of catalysts supported on metal oxides. However, the corresponding in-depth study for metal1-metal2 (M1-M2) composited configurations is rarely achieved due to the lack of reliable models and manipulation mechanisms of MSI modifications. We modeled ruthenium on copper support (Ru-Cu) metal catalysts with negligible interfacial contact potential (e0.06 V) and investigated MSI-dependent hydrogen evolution reaction (HER) catalysis kinetics induced by an electronic hydroxyl (HO-) modifier. Comprehensive simulations and characterizations confirmed that adjusting the HO- coverage can readily realize the tailorable improvement of MSI, facilitating charge migration at the Ru-Cu interface and optimizing the overall HER pathway on active Ru. As a result, a 5/10 monolayer (ML) HO-modified catalyst (5/10 ML) exhibits superior HER activity and durability owing to the relatively stronger MSI. This catalyst also ensured sustainable and efficient hydrogen generation in a urea electrolyzer with significant energy savings. Our work provides a valuable reference for optimizing the MSI-activity relationship in M1-M2 catalysts that target more than just HER.

Cascade NH3 Oxidation and N2O Decomposition via Bifunctional Co and Cu Catalysts

The selective catalytic oxidation of NH3 (NH3-SCO) to N2 is an important reaction for the treatment of diesel engine exhaust. Co3O4 has the highest activity among non-noble metals but suffers from N2O release. Such N2O emissions have recently been regulated due to having a 300× higher greenhouse gas effect than CO2. Here, we design CuO-supported Co3O4 as a cascade catalyst for the selective oxidation of NH3 to N2. The NH3-SCO reaction on CuO-Co3O4 follows a de-N2O pathway. Co3O4 activates gaseous oxygen to form N2O. The high redox property of the CuO-Co3O4 interface promotes the breaking of the N-O bond in N2O to form N2. The addition of CuO-Co3O4 to the Pt-Al2O3 catalyst reduces the full NH3 conversion temperature by 50 K and improves the N2 selectivity by 20%. These findings provide a promising strategy for reducing N2O emissions and will contribute to the rational design and development of non-noble metal catalysts.

Loading IrOx Clusters on MnO2 Boosts Acidic Water Oxidation via Metal-Support Interaction

Noble metal-based electrocatalysts are crucial for efficient acidic water oxidation to develop green hydrogen energy. However, traditional noble metal catalysts loaded on inactive substrates show limited intrinsic catalytic activity, and their large sizes have compromised the atom efficiency of these noble metals. Herein, IrOx nanoclusters with sizes below 2 nm, displaying high atom-utilization efficiency of Ir species, were supported on a redox-active MnO2 nanosubstrate (IrOx/MnO2) with different phases (α-MnO2, δ-MnO2, and ε-MnO2) to explore the optimal combination. Electrochemical measurements showed that IrOx/ε-MnO2 had excellent OER performance with a low overpotential of 225 mV at 10 mA cm-2 in 0.5 M H2SO4, superior to its counterpart, IrOx/α-MnO2 (242 mV) and IrOx/δ-MnO2 (286 mV). Moreover, it also delivered robust stability with no obvious change in operating potential at 10 mA cm-2 during 50 h of continuous operation. Combining the XPS results and Bader charge analysis, we demonstrated that the strong metal-support interactions of IrOx/ε-MnO2 could effectively regulate the electronic structures of the active Ir atoms and stabilize IrOx nanoclusters on supports to suppress their detachment, resulting in significantly enhanced catalytic activity and stability for acidic OER. DFT calculations further supported that the enhanced catalytic OER performance of IrOx/ε-MnO2 could be ascribed to the appropriate strength of interactions between the active Ir sites and the reaction intermediates of the potential-determining step (*O and *OOH) regulated by the redox-active substrates.

Ti-Doping in Silica-Supported PtZn Propane Dehydrogenation Catalysts: From Improved Stability to the Nature of the Pt-Ti Interaction

Propane dehydrogenation is an important industrial reaction to access propene, the world's second most used polymer precursor. Catalysts for this transformation are required to be long living at high temperature and robust toward harsh oxidative regeneration conditions. In this work, combining surface organometallic chemistry and thermolytic molecular precursor approach, we prepared well-defined silica-supported Pt and alloyed PtZn materials to investigate the effect of Ti-doping on catalytic performances. Chemisorption experiments and density functional calculations reveal a significant change in the electronic structure of the nanoparticles (NPs) due to the Ti-doping. Evaluation of the resulting materials PtZn/SiO₂ and PtZnTi/SiO₂ during long deactivation phases reveal a stabilizing effect of Ti in PtZnTi/SiO₂ with a k_d of 0.015 h^-1 compared to PtZn/SiO₂ with a k_d of 0.022 h^-1 over 108 h on stream. Such a stabilizing effect is also present during a second deactivation phase after applying a regeneration protocol to the materials under O₂ and H₂ at high temperatures. A combined scanning transmission electron microscopy, in situ X-ray absorption spectroscopy, electron paramagnetic resonance, and density functional theory study reveals that this effect is related to a sintering prevention of the alloyed PtZn NPs in PtZnTi/SiO₂ due to a strong interaction of the NPs with Ti sites. However, in contrast to classical strong metal-support interaction, we show that the coverage of the Pt NPs with TiO_x species is not needed to explain the changes in adsorption and reactivity properties. Indeed, the interaction of the Pt NPs with Ti^III sites is enough to decrease CO adsorption and to induce a red-shift of the CO band because of electron transfer from the Ti^III sites to Pt⁰.

VSe2-x O x @Pd Sensor for Operando Self-Monitoring of Palladium-Catalyzed Reactions

Operando monitoring of catalytic reaction kinetics plays a key role in investigating the reaction pathways and revealing the reaction mechanisms. Surface-enhanced Raman scattering (SERS) has been demonstrated as an innovative tool in tracking molecular dynamics in heterogeneous reactions. However, the SERS performance of most catalytic metals is inadequate. In this work, we propose hybridized VSe_2-x O _x @Pd sensors to track the molecular dynamics in Pd-catalyzed reactions. Benefiting from metal-support interactions (MSI), the VSe_2-x O _x @Pd realizes strong charge transfer and enriched density of states near the Fermi level, thereby strongly intensifying the photoinduced charge transfer (PICT) to the adsorbed molecules and consequently enhancing the SERS signals. The excellent SERS performance of the VSe_2-x O _x @Pd offers the possibility for self-monitoring the Pd-catalyzed reaction. Taking the Suzuki-Miyaura coupling reaction as an example, operando investigations of Pd-catalyzed reactions were demonstrated on the VSe_2-x O _x @Pd, and the contributions from PICT resonance were illustrated by wavelength-dependent studies. Our work demonstrates the feasibility of improved SERS performance of catalytic metals by modulating the MSI and offers a valid means to investigate the mechanisms of Pd-catalyzed reactions based on VSe_2-x O _x @Pd sensors.

Novel Insights on the Metal-Support Interactions of Pd/ZrO2 Catalysts on CH4 Oxidation

With the environmental harm of unburnt CH₄ in natural gas vehicle exhaust, oxidizing CH₄ to CO₂ over catalysts at low temperatures becomes an exigent issue. Supported Pd catalysts possess higher CH₄ activity than other noble metal catalysts. A series of Pd/ZrO₂ catalysts were synthesized to research the potential relationship among Pd particle morphology, electron transfer, CH₄ oxidation mechanism, and catalytic activity. Characterizations show that the ratio of PdO_x facets to edge/corner sites on four catalysts increases in the order of PZ85 ≈ PZ40 < PZ55 < PZ70 because of the difference in content of surface -OH groups, and this order turns out to be the same as that of electron transfer intensity, revealing the degree of metal-support interactions. This kind of metal-support interaction in PZ70 can be helpful to accelerate CH₄ combustion via promoting the break of the C-H bond and dissociation of CO₃* according to density functional theory studies. T₉₀ of the PZ70 catalyst with optimum catalytic activity reaches 331 °C.

Ultrafine Core@Shell Cu1Au1@Cu1Pd3 Nanodots Synergized with 3D Porous N-Doped Graphene Nanosheets as a High-Performance Multifunctional Electrocatalyst

Rationally combining designed supports and metal-based nanomaterials is effective to synergize their respective physicochemical and electrochemical properties for developing highly active and stable/durable electrocatalysts. Accordingly, in this work, sub-5 nm and monodispersed nanodots (NDs) with the special nanostructure of an ultrafine Cu₁Au₁ core and a 2-3-atomic-layer Cu₁Pd₃ shell are synthesized by a facile solvothermal method, which are further evenly and firmly anchored onto 3D porous N-doped graphene nanosheets (NGS) via a simple annealing (A) process. The as-obtained Cu₁Au₁@Cu₁Pd₃ NDs/NGS-A exhibits exceptional electrocatalytic activity and noble-metal utilization toward the alkaline oxygen reduction, methanol oxidation, and ethanol oxidation reactions, showing dozens-fold enhancements compared with commercial Pd/C and Pt/C. Besides, it also has excellent long-term electrochemical stability and electrocatalytic durability. Advanced and comprehensive experimental and theoretical analyses unveil the synthetic mechanism of the special core@shell nanostructure and further reveal the origins of the significantly enhanced electrocatalytic performance: (1) the prominent structural properties of NGS, (2) the ultrasmall and monodispersed size as well as the highly uniform morphology of the NDs-A, (3) the special Cu-Au-Pd alloy nanostructure with an ultrafine core and a subnanometer shell, and (4) the strong metal-support interaction. This work not only develops a facile method for fabricating the special metal-based ultrafine-core@ultrathin-shell nanostructure but also proposes an effective and practical design paradigm of comprehensively and rationally considering both supports and metal-based nanomaterials for realizing high-performance multifunctional electrocatalysts, which can be further expanded to other supports and metal-based nanomaterials for other energy-conversion or environmental (electro)catalytic applications.

Design of a Metal/Oxide/Carbon Interface for Highly Active and Selective Electrocatalysis

Sustainable energy-conversion and chemical-production require catalysts with high activity, durability, and product-selectivity. Metal/oxide hybrid structure has been intensively investigated to achieve promising catalytic performance, especially in neutral or alkaline electrocatalysis where water dissociation is promoted near the oxide surface for (de)protonation of intermediates. Although catalytic promise of the hybrid structure is demonstrated, it is still challenging to precisely modulate metal/oxide interfacial interactions on the nanoscale. Herein, we report an effective strategy to construct rich metal/oxide nano-interfaces on conductive carbon supports in a surfactant-free and self-terminated way. When compared to the physically mixed Pd/CeO₂ system, a much higher degree of interface formation was identified with largely improved hydrogen oxidation reaction (HOR) kinetics. The benefits of the rich metal-CeO₂ interface were further generalized to Pd alloys for optimized adsorption energy, where the Pd₃Ni/CeO₂/C catalyst shows superior performance with HOR selectivity against CO poisoning and shows long-term stability. We believe this work highlights the importance of controlling the interfacial junctions of the electrocatalyst in simultaneously achieving enhanced activity, selectivity, and stability.

Single Atom Catalysts for Selective Methane Oxidation to Oxygenates

Direct conversion of methane (CH₄) to C_1-2 liquid oxygenates is a captivating approach to lock carbons in transportable value-added chemicals, while reducing global warming. Existing approaches utilizing the transformation of CH₄ to liquid fuel via tandemized steam methane reforming and the Fischer-Tropsch synthesis are energy and capital intensive. Chemocatalytic partial oxidation of methane remains challenging due to the negligible electron affinity, poor C-H bond polarizability, and high activation energy barrier. Transition-metal and stoichiometric catalysts utilizing harsh oxidants and reaction conditions perform poorly with randomized product distribution. Paradoxically, the catalysts which are active enough to break C-H also promote overoxidation, resulting in CO₂ generation and reduced carbon balance. Developing catalysts which can break C-H bonds of methane to selectively make useful chemicals at mild conditions is vital to commercialization. Single atom catalysts (SACs) with specifically coordinated metal centers on active support have displayed intrigued reactivity and selectivity for methane oxidation. SACs can significantly reduce the activation energy due to induced electrostatic polarization of the C-H bond to facilitate the accelerated reaction rate at the low reaction temperature. The distinct metal-support interaction can stabilize the intermediate and prevent the overoxidation of the reaction products. The present review accounts for recent progress in the field of SACs for the selective oxidation of CH₄ to C_1-2 oxygenates. The chemical nature of catalytic sites, effects of metal-support interaction, and stabilization of intermediate species on catalysts to minimize overoxidation are thoroughly discussed with a forward-looking perspective to improve the catalytic performance.

Heterostructured Ceria-Titania-Supported Platinum Catalysts for the Water Gas Shift Reaction

The water gas shift (WGS) reaction is a key process in the industrial hydrogen production and the development and application of the proton exchange membrane fuel cell. Metal oxide-supported highly dispersed Pt has been proved as an efficient catalyst for the WGS reaction. In this work, a series of supported 0.5Pt/xCe-10Ti (x = 1, 3, or 5) catalysts with different Ce/Ti molar ratios were prepared by a simple deposition-precipitation method. Compared with single TiO₂- or CeO₂-supported Pt catalysts, it was found that the 0.5Pt/3Ce-10Ti catalyst showed an obvious advantage in activity for the WGS reaction. In this catalyst, dispersed CeO₂ nanoparticles were supported on the TiO₂ sheets, and Pt single atoms and nanoparticles were located on CeO₂ and at the boundary of TiO₂ and CeO₂, respectively. It found that the reduction ability of the supported Pt catalyst was remarkably improved; meanwhile, the adsorption strength of CO on the surface of 0.5Pt/3Ce-10Ti was moderate. The heterostructured CeO₂-TiO₂ support gave an effective regulation on the Pt status and further influenced the CO adsorption ability, inducing excellent WGS reaction activity. This work provides a reference for the development and application of heterostructured materials in heterogeneous catalysis.

Tuning Metal-Support Interaction of Pt-CeO2 Catalysts for Enhanced Oxidation Reactivity

Metal-support interaction (MSI) has been widely recognized to be playing a pivotal role in regulating the catalytic activity of various reactions. In this work, the degree of MSI between Pt and CeO₂ support was finely tuned by adjusting the activation condition, and the obtained catalysts were tested for the oxidative abatement of CO and HCHO under ambient conditions. The characterization of catalysts shows that activation of strongly interacting Pt-CeO₂ at higher temperatures by H₂ leads to a weaker MSI with increased electron density of Pt, and this modification of local electronic properties is demonstrated to result in enhanced O₂ adsorption/activation to prevent the CO self-poisoning effect, while it abates the activity of CO adsorption/activation and oxidation of adsorbed CO. The Pt-CeO₂ catalyst with a moderate MSI, which is able to balance each step in the catalytic cycle over Pt and Pt-CeO₂ interface domains, displays the highest activity for CO/HCHO oxidation under ambient conditions.

Boosting the Dispersity of Metallic Ag Nanoparticles and Ozone Decomposition Performance of Ag-Mn Catalysts via Manganese Vacancy-Dependent Metal-Support Interactions

Ozone (O₃) removal has important implications for environmental protection and human health, and Ag-Mn catalysts have shown promising O₃ decomposition. Catalysts with Ag supported on porous cube-like α-Mn₂O₃ (Ag/Mn-C) with high utilization of Ag were prepared by the impregnation method and showed excellent O₃ decomposition activity. Physicochemical characterizations demonstrated that metallic Ag nanoparticles (Ag_n⁰) were mainly anchored on manganese vacancies, forming Ag-O-Mn bonds between Ag_n⁰ and α-Mn₂O₃-C. The abundant manganese vacancies of α-Mn₂O₃-C can lead to Ag_n⁰ with a smaller particle size and more uniform dispersion, thereby resulting in markedly enhanced O₃ decomposition performance compared to Ag_n⁰ with a large particle size and uneven distribution on rod-like α-Mn₂O₃ (Ag/Mn-R). Under a relative humidity of 65% and a space velocity of 1,110,000 h^-1, the conversion of 40 ppm O₃ over the 2%Ag/Mn-C catalyst within 6 h (98%) at 30 °C was more than twice as high as that of the 2%Ag/Mn-R catalyst (42%). The study provides guidance for the design of highly efficient Ag-based catalysts and the understanding of the microstructure of supported catalysts.

In Situ Growth of Pt-Co Nanocrystals on Different Types of Carbon Supports and Their Electrochemical Performance toward Oxygen Reduction

Carbon-supported Pt-M (M = Co, Ni, and Fe) alloy nanocrystals are widely used as catalysts toward oxygen reduction, a reaction key to the operation of proton-exchange membrane fuel cells. Here we report a colloidal method for the in situ growth of Pt-Co nanocrystals on various commercial carbon supports. The use of different carbon supports resulted in not only variations in size and composition for the nanocrystals but also their catalytic activity and durability toward oxygen reduction in acidic media. Among the nanocrystals, those grown on Vulcan XC72 and Ketjenblack EC300J showed the highest specific and mass activities in the 0.1 M HClO4 and 0.05 M H2SO4 electrolytes, respectively. Additionally, the catalysts also showed different durability depending on the strength of the interaction between the nanocrystals and the carbon support. Our analysis demonstrated that the difference in catalytic performance could be ascribed to the distinct effects of carbon support on both the synthetic and catalytic processes.

Boosting Interfacial Electron Transfer between Pd and ZnTi-LDH via Defect Induction for Enhanced Metal-Support Interaction in CO Direct Esterification Reaction

Strong metal-support interaction is crucial to the stability of catalysts in heterogeneous catalysis. However, reports on boosting interfacial electron transfer between metal and support via defect induction for enhanced metal-support interaction are limited. In this work, ultrathin reducible ZnTi-layered double hydroxide (LDH) nanosheets with rich oxygen defects were synthesized to stabilize Pd clusters, and the rich oxygen defects promoted Pd cluster bonding with Zn and Ti atoms in supports, thereby forming a metal-metal bond. Electron spin resonance (ESR), X-ray absorption fine spectra (XAFS), and density functional theory (DFT) calculations demonstrate remarkable interfacial electron transfer (0.62 e). The Pd/ZnTi-LDH catalyst shows superior catalytic stability for CO direct esterification to dimethyl oxalate. By contrast, the nonreducible Pd/ZnAl-LDH catalyst with a few oxygen defects shows minimal interfacial electron transfer (0.08 e), which leads to relatively poor catalytic stability. This work provides a deep insight into promoting the stability of catalysts by boosting interfacial electron transfer via defect induction.

Monodispersed Ruthenium Nanoparticles on Nitrogen-Doped Reduced Graphene Oxide for an Efficient Lithium-Oxygen Battery

Lithium-oxygen batteries with ultrahigh energy densities have drawn considerable attention as next-generation energy storage devices. However, their practical applications are challenged by sluggish reaction kinetics aimed at the formation/decomposition of discharge products on battery cathodes. Developing effective catalysts and understanding the fundamental catalytic mechanism are vital to improve the electrochemical performance of lithium-oxygen batteries. Here, uniformly dispersed ruthenium nanoparticles anchored on nitrogen-doped reduced graphene oxide are prepared by using an in situ pyrolysis procedure as a bifunctional catalyst for lithium-oxygen batteries. The abundance of ruthenium active sites and strong ruthenium-support interaction enable a feasible discharge product formation/decomposition route by modulating the surface adsorption of lithium superoxide intermediates and the nucleation and growth of lithium peroxide species. Benefiting from these merits, the electrode provides a drastically increased discharge capacity (17,074 mA h g^-1), a decreased charge overpotential (0.51 V), and a long-term cyclability (100 cycles at 100 mA g^-1). Our observations reveal the significance of the dispersion and coordination of metal catalysts, shedding light on the rational design of efficient catalysts for future lithium-oxygen batteries.

Titanium Nitride-Supported Platinum with Metal-Support Interaction for Boosting Photocatalytic H2 Evolution of Indium Sulfide

Metal-support interaction strongly influences the catalytic properties of metal-based catalysts. Here, titanium nitride (TiN) nanospheres are shown to be an outstanding support, for tuning the electronic property of platinum (Pt) nanoparticles and adjusting the morphology of indium sulfide (In₂S₃) active components, forming flower-like core-shell nanostructures (TiN-Pt@In₂S₃). The strong metal-support interaction between Pt and TiN through the formation of Pt-Ti bonds favors the migration of charge carriers and leads to the easy reducibility of TiN-Pt, thus improving the photocatalytic atom efficiency of Pt. The TiN-Pt@In₂S₃ composite shows reduction of Pt loading by 70% compared to the optimal Pt-based system. In addition, the optimal TiN-Pt@In₂S₃ composite exhibits a H₂ evolution rate 4 times that of a Pt reference. This increase outperforms all other supports reported thus far.

Ultrasmall Ru Nanoparticles Highly Dispersed on Sulfur-Doped Graphene for HER with High Electrocatalytic Performance

Nanostructuring and metal-support interactions have been explored as effective methods to improve the electrocatalytic activity in heterogeneous catalysis. In this study, we have fabricated ultrasmall Ru nanoparticles (NPs) dispersed on S-doped graphene (denoted as Ru/S-rGO) by a facile "one-pot" procedure. The experimental results indicated that both the S doping and moderate degree of oxidization of GO can induce the formation and high dispersion of the ultrasmall Ru NPs with larger electrochemically active surface areas for exposing more active sites. Metal-support interaction between S-doped graphene and Ru NPs was observed from the X-ray photoelectron spectroscopy and electronic charge-difference studies. It resulted in the decrease in the electron density of Ru, which facilitated electron release from H₂O and H-OH bond breakage. The results of density functional theory calculation confirmed that the S-dopants could reduce the energy barrier for breaking the H-OH bond to accelerate water dissociation during the alkaline hydrogen evolution reaction (HER). At a current density 20 mA cm^-2, the lowest overpotential of 14 mV, superior to that of Pt/C in alkaline solution, was observed for Ru/S-rGO-24. The observed lowest value of overpotential was because of the ultrasmall size, high dispersion, and metal-support interaction. This work provides a simple and effective method in designing advanced electrocatalysts for the HER in an alkaline electrolyte.

Engineering Nanoscale Interfaces of Metal/Oxide Nanowires to Control Catalytic Activity

The interfacial effect between a metal catalyst and its various supporting transition metal oxides on the catalytic activity of heterogeneous catalysis has been extensively explored; engineering interfacial sites of metal supported on metal oxide has been found to influence catalytic performance. Here, we investigate the interfacial effect of Pt nanowires (NWs) vertically and alternatingly stacked with titanium dioxide (TiO₂) or cobalt monoxide (CoO) NWs, which exhibit a strong metal-support interaction under carbon monoxide (CO) oxidation. High-resolution nanotransfer printing based on nanoscale pattern replication and e-beam evaporation were utilized to obtain the Pt NWs cross-stacked on the CoO or TiO₂ NW on the silicon dioxide (SiO₂) substrate with varying numbers of nanowires. The morphology and interfacial area were precisely determined by means of atomic force microscopy and scanning electron microscopy. The cross-stacked Pt/TiO₂ NW and Pt/CoO NW catalysts were estimated with CO oxidation under 40 Torr CO and 100 Torr O₂ from 200 to 240 °C. Higher catalytic activity was found on the Pt/CoO NW catalyst than on Pt/TiO₂ NWs and Pt NWs, which indicates the significance of nanoscale metal-oxide interfaces. As the number of nanowire layers increased, the catalytic activity became saturated. Our study demonstrates the interfacial role of nanoscale metal-oxide interfaces under CO oxidation, which has intriguing applications in the smart design of catalytic materials.

Insights into Spectator-Directed Catalysis: CO Adsorption on Amine-Capped Platinum Nanoparticles on Oxide Supports

Introducing spectator molecules to the surface of supported noble metal nanoparticles is an innovative approach to improve the selectivity of heterogeneous catalysts. Colloidal synthesis of the nanoparticles allows researchers to select the spectator and the nanoparticle size, as well as the subsequent particle loading on different supports under well-defined conditions. However, understanding the interplay of the various effects that spectators can have on the catalytic properties of metal surfaces still requires further development. In this work, dodecylamine (DDA) is used to develop insights into the influence of spectator species on the chemical properties of 1.4-3.7 nm colloidal Pt nanoparticles on different supports (powders of Al₂O₃, ZnO, and TiO₂). DDA deposition results in two chemically distinct spectator species on the Pt surface depending on temperature, as evidenced from X-ray photoelectron spectroscopy (XPS). DDA selectively blocks terrace sites on the Pt nanoparticles at room temperature, as apparent from diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) with CO as a surface-sensitive probe molecule. The electron donor effect of the amine group in DDA influences the electron densities of the accessible lower coordinated, reactive Pt adsorption sites as indicated from spectral shifts in DRIFTS and XPS. Furthermore, DDA suppresses CO-induced surface reconstruction of the Pt surface and metal-support interactions, although these effects depend on temperature and support composition. Therefore, spectators may be used to adjust the nature of metal nanoparticle-oxidic support interactions. The experimental findings and mechanistic explanations are supported by density functional theory calculations. These results may build a platform in understanding the fundamental properties of amine spectators in Pt-based catalysis, activating specific sites, enhancing site selectivity, acting as sensors, and directing the metal-support interaction.

Highly Crystalline Mesoporous Titania Loaded with Monodispersed Gold Nanoparticles: Controllable Metal-Support Interaction in Porous Materials

We report the syntheses of mesoporous Au/TiO₂ hybrid photocatalysts with ordered and crystalline frameworks using co-assembly of organosilane-containing colloidal amphiphile micelles (CAMs) and poly(ethylene oxide)-modified gold nanoparticles (AuNPs) as templates. The assembled CAMs can convert to inorganic silica during calcination at elevated temperatures, providing extraordinary thermal stability to preserve the porosity of TiO₂ and the nanostructures of AuNPs. Well-defined AuNPs supported within mesoporous TiO₂ (Au@mTiO₂) can be prepared using thermal annealing at temperatures up to 800 °C. High-temperature treatment (≥500 °C) under air is found to not only improve the crystallinity of TiO₂ but also induce oxidative strong metal-support interactions (SMSIs) at Au/TiO₂ interfaces. For oxidative SMSIs, the surface oxidation of AuNPs can generate positively charged Au^δ+ species, while TiO₂ gets reduced simultaneously. Using photocatalytic oxidation of benzyl alcohol as a model reaction, Au@mTiO₂ calcined at 600 °C for 12 h exhibited the best activity under UV irradiation, while Au@mTiO₂ calcined at 600 °C for 2 h showed the best activity under visible light. The delicate balance between the crystallinity and porosity of TiO₂ and the SMSIs at Au-TiO₂ interfaces is found to impact the photocatalytic activity of these hybrid materials.

Regulation of Ni-CNT Interaction on Mn-Promoted Nickel Nanocatalysts Supported on Oxygenated CNTs for CO2 Selective Hydrogenation

Mn-promoted Ni nanoparticles (NPs) supported on oxygen-functionalized carbon nanotubes (CNTs) were synthesized for CO₂ hydrogenation to methane. This novel metal-carbon catalytic system was characterized by both experimental and computational studies. An anomalous metal-support interaction mode (i.e., a higher temperature would lead to a weakened Ni-CNT interaction) was observed. Deep investigation confirmed that surface oxygen groups (SOGs) on CNTs played a key role in tuning the Ni-CNT interaction. We proposed that high calcination temperature would firstly lead to the decomposition of SOGs (>400 °C), then causing a loss of anchoring sites and the anchoring effect of SOGs on Ni NPs, thus cutting off the connection between interfacial Ni atoms and CNT body, resulting in the migration and coalescence of fine flat Ni NPs into larger sphere ones at 550 °C (geometric effect). Density functional theory calculation study clarified that this kind of anchoring effect stemmed from the formation of covalent bonding between the interfacial Ni atom and C or O elements of SOGs, causing the electrons to be transferred from Ni atoms to CNT support because of the intrinsic electronegativity of -COOH (electronic effect). Besides, Mn promotion notably boosts the activity compared with unpromoted catalysts, which was irrelevant to the size effect, but enhanced CO₂ adsorption and conversion according to the result of CO₂-temperature programmed desorption and transient response experiment. The optimized NiMn350 catalyst endowed with Mn promotion and robust Ni-CNT interaction showed both high activity and sintering resistance for more than 140 h. Our findings paved the way to reasonably design the metal-carbon catalyst with both high activity and stability.

Pt-Embedded CuO x-CeO2 Multicore-Shell Composites: Interfacial Redox Reaction-Directed Synthesis and Composition-Dependent Performance for CO Oxidation

Exploring the state-of-the-art heterogeneous catalysts has been a general concern for sustainable and clean energy. Here, Pt-embedded CuO _x-CeO₂ multicore-shell (Pt/CuO _x-CeO₂ MS) composites are fabricated at room temperature via a one-pot and template-free procedure for catalyzing CO oxidation, a classical probe reaction, showing a volcano-shaped relationship between the composition and catalytic activity. We experimentally unravel that the Pt/CuO _x-CeO₂ MS composites are derived from an interfacial autoredox process, where Pt nanoparticles (NPs) are in situ encapsulated by self-assembled ceria nanospheres with CuO _x clusters adhered through deposition/precipitation-calcination process. Only Cu-O and Pt-Pt coordination structures are determined for CuO _x clusters and Pt NPs in Pt/CuO _x-CeO₂ MS, respectively. Importantly, the close vicinity between Pt and CeO₂ benefits to more oxygen vacancies in CeO₂ counterparts and results in thin oxide layers on Pt NPs. Meanwhile, the introduction of CuO _x clusters is crucial for triggering synergistic catalysis, which leads to high resistance to aggregation of Pt NPs and improvement of catalytic performance. In CO oxidation reaction, both Pt^δ+-CO and Cu⁺-CO can act as active sites during CO adsorption and activation. Nonetheless, redundant content of Pt or Cu will induce a strongly bound Pt-O-Ce or Cu-[O _x]-Ce structures in air-calcinated Pt/CuO _x-CeO₂ MS composites, respectively, which are both deleterious to catalytic reactivity. As a result, the composition-dependent catalytic activity and superior durability of Pt/CuO _x-CeO₂ MS composites toward CO oxidation reaction are achieved. This work should be instructive for fabricating desirable multicomponent catalysts composed of noble metal and bimetallic oxide composites for diverse heterogeneous catalysis.