Density-of-States Matching-Induced Ultrahigh Current Density and High-Humidity Resistance in a Simply Structured Triboelectric Nanogenerator

Multifunctional Sensitive Positive Friction Layer of TPU/MXene/STO Composited Film for Triboelectric Nanogenerator

Triboelectric nanogenerators (TENGs) are ideal candidates for flexible wearable electronics due to their simple structure, high output voltage, and sensitivity. However, the output of the flexible TENG for wearable electronics still needs further improvement. This study fabricated a positive triboelectric layer with fillers to improve the output equipped with a dense, irregular surface structure by using electrospinning. The effect of the composite filler consisting of conductive MXene nanosheets and ferroelectric strontium titanate nanoparticles was investigated by adjusting their ratio. Compared to pure thermoplastic polyurethane (TPU), the voltage and current of the TMS-based (TPU/MXene/STO) TENG increased by 7 and 34 times. Furthermore, the fabricated TENG has been successfully applied in flexible sensing. It can detect the curvature of different object grips and various breathing conditions, making it promising for intelligent sensing and health monitoring applications. This study successfully developed a low-cost, high-performance, and highly sensitive TENG, which shows significant potential in smart wearable devices.

Autonomous, Moisture-Driven Flexible Electrogenerative Dressing for Enhanced Wound Healing

Electrotherapy has shown considerable potential in treating chronic wounds, but conventional approaches relying on bulky external power supplies and mechanical force are limited in their clinical utility. This study introduces an autonomous, moisture-driven flexible electrogenerative dressing (AMFED) that overcomes these limitations. The AMFED integrates a moist-electric generator (MEG), an antibacterial hydrogel dressing, and concentric molybdenum (Mo) electrodes to provide a self-sustaining electrical supply and potent antibacterial activity against Staphylococcus aureus and Escherichia coli. The MEG harnesses chemical energy from moisture to produce a stable direct current of 0.61 V without external input, delivering this therapeutic electrical stimulation to the wound site through the Mo electrodes. The AMFED facilitates macrophage polarization toward reparative M2 phenotype and regulates inflammatory cytokines. Moreover, in vivo studies suggest that the AMFED group significantly enhances chronic wound healing, with an approximate 41% acceleration compared to the control group. Using a diabetic mouse wound model, the AMFED demonstrates its effectiveness in promoting nerve regulation, epithelial migration, and vasculogenesis. These findings present a novel and efficient platform for accelerating chronic wound healing.

Textile-Based TENG Woven with Fluorinated Polyimide Yarns for Motion and Position Monitoring

Polyimide-based triboelectric nanogenerators (TENGs) capable of energy harvesting in harsh environments (high temperature and high humidity) have been extensively studied. However, most polyimide-based TENGs have the disadvantages of poor air permeability and poor softness. In this study, a core-shell yarn with good air permeability, softness, and high electric output performance was successfully prepared by conjugate electrospinning. FEP-doped FPI and nickel-plated aramid yarn were employed as the shell and core materials, respectively. Due to the unique hierarchical porous structure and fluorinated functional group modification, the yarns exhibit excellent output performance (maximum open-circuit voltage is 22.7 V per length of 10 cm) compared to traditional polyimide yarns. The textile woven with this yarn has good high-temperature resistance, antifouling, waterproof, and self-cleaning performance, and still maintains an output performance of about 80% under 99% relative humidity. Moreover, this textile-based TENG has no significant attenuation after 10,000 cycles, showing good stability and durability. Finally, the TENG based on the intelligent fire suit is designed, which can be used for the movement and position monitoring of firefighters in high-temperature and high-humidity environments. This fluorinated polyimide yarn prepared in this study provides a promising solution for the development of self-powered sensors capable of monitoring the movement status and position of firefighters in high-temperature and high-humidity environments.

Enhancing the Humidity Resistance of Triboelectric Nanogenerators: A Review

Triboelectric nanogenerators (TENGs) are sustainable energy resources for powering electronic devices from miniature to large-scale applications. However, their output performance and stability can deteriorate significantly when TENGs are exposed to moisture or humidity caused by the ambient environment or human physiological activities. This review provides an overview of the recent research advancements in enhancing the humidity resistance of TENGs. Various approaches have been reviewed including encapsulation techniques, surface modification of triboelectric materials to augment hydrophobicity or superhydrophobicity, the creation of fibrous architectures for effective moisture dissipation, leveraging water assistance for TENG performance enhancement, and other strategies like charge excitation. These research efforts contribute to the improvement of environmental adaptability and lead to expanded practical TENG applications both as energy harvesters and self-powered sensors. The efficacy of these strategies and future challenges are also discussed to facilitate the continued development of resilient TENGs in high humidity environments.

Research Progress and Emerging Directions in Stimulus Electro-Responsive Polymer Materials

Stimulus electro-responsive polymer materials can reversibly change their physical or chemical properties under various external stimuli such as temperature, light, force, humidity, pH, and magnetic fields. This review introduces typical conventional stimulus electro-responsive polymer materials and extensively explores novel directions in the field, including multi-stimuli electro-responsive polymer materials and humidity electro-responsive polymer materials pioneered by our research group. Despite significant advancements in stimulus electro-responsive polymer materials, ongoing research focuses on enhancing their efficiency, lifespan, and production costs. Interdisciplinary collaboration and advanced technologies promise to broaden the application scope of these materials, particularly in medical and environmental protection fields, ultimately benefiting society.

Free-Standing Electrode and Fixed Surface Tiny Electrode Implemented Triboelectric Nanogenerator with High Instantaneous Current

Conventional triboelectric nanogenerators (TENGs) face challenges pertaining to low output current density at low working frequencies and high internal impedance. While strategies, such as surface modification to enhance surface charge density, permittivity regulation of materials, and circuit management, have partially mitigated these issues. However, they have also resulted in increased complexity in the fabrication process. Therefore, there is an urgent demand for a universal and simplified approach to address these challenges. To fulfill this need, this work presents a free-standing electrode and fixed surface tiny electrode implemented triboelectric nanogenerator (FFI-TENG). It is fabricated by a straightforward yet effective method: introducing a tiny electrode onto the surface of the tribo-negative material. This approach yields substantial enhancements in performance, notably a more than tenfold increase in output current density, a reduction in effective working frequencies, and a decrease in matching resistance as compared to vertical contact-separation TENGs (CS-TENGs) or single-electrode TENGs (SE-TENGs). Simultaneously, a comprehensive examination and proposition regarding the operational mechanism of FFI-TENG, highlighting its extensive applicability are also offered. Significantly, FFI-TENG excels in mechanical energy harvesting even under ultra-low working frequencies (0.1 Hz), outperforming similar contact-separation models. This innovation positions it as a practical and efficient solution for the development of low-entropy energy harvesters.

Recyclable and mechanically tough nanocellulose reinforced natural rubber composite conductive elastomers for flexible multifunctional sensor

The development of flexible wearable multifunctional electronics has gained great attention in the field of human motion monitoring. However, developing mechanically tough, highly stretchable, and recyclable composite conductive materials for application in multifunctional sensors remained great challenges. In this work, a mechanically tough, highly stretchable, and recyclable composite conductive elastomer with the dynamic physical-chemical dual-crosslinking network was fabricated by the combination of multiple hydrogen bonds and dynamic ester bonds. To prepare the proposed composite elastomers, the polyaniline-modified carboxylate cellulose nanocrystals (C-CNC@PANI) were used as both conductive filler to yield high conductivity of 15.08 mS/m, and mechanical reinforcement to construct the dynamic dual-crosslinking network with epoxidized natural rubber latex to realize the high mechanical strength (8.65 MPa) and toughness (29.57 MJ/m3). Meanwhile, the construction of dynamic dual-crosslinking network endowed the elastomer with satisfactory recyclability. Based on these features, the composite conductive elastomers were used as strain sensors, and electrode material for assembling flexible and recyclable self-powered sensors for monitoring human motions. Importantly, the composite conductive elastomers maintained reliable sensing and energy harvesting performance even after multiple recycling process. This study provides a new strategy for the preparation of recyclable, mechanically tough composite conductive materials for wearable sensors.

Charge Dispersion Strategy for High-Performance and Rain-Proof Triboelectric Nanogenerator

Triboelectric nanogenerator (TENG) is becoming a sustainable and renewable way of energy harvesting and self-powered sensing because of low cost, simple structure, and high efficiency. However, the output current of existing TENGs is still low. It is proposed that the output current of TENGs can be dramatically improved if the triboelectric charges can distribute inside the triboelectric layers. Herein, a novel single-electrode conductive network-based TENG (CN-TENG) is developed by introducing a conductive network of multiwalled carbon nanotubes in dielectric triboelectric layer of thermoplastic polyurethane (TPU). In this CN-TENG, the contact electrification-induced charges distribute on both the surface and interior of the dielectric TPU layer. Thus, the short-circuit current of CN-TENG improves for 100-fold, compared with that of traditional dielectric TENG. In addition, this CN-TENG, even without packing, can work stably in high-humidity environments and even in the rain, which is another main challenge for conventional TENGs due to charge leakage. Further, this CN-TENG is applied for the first time, to successfully distinguish conductive and dielectric materials. This work provides a new and effective strategy to fabricate TENGs with high output current and humidity-resistivity, greatly expanding their practical applications in energy harvesting, movement sensing, human-machine interaction, and so on.

Recent Progress of Wearable Triboelectric Nanogenerator-Based Sensor for Pulse Wave Monitoring

Today, cardiovascular diseases threaten human health worldwide. In clinical practice, it has been concluded that analyzing the pulse waveform can provide clinically valuable information for the diagnosis of cardiovascular diseases. Accordingly, continuous and accurate monitoring of the pulse wave is essential for the prevention and detection of cardiovascular diseases. Wearable triboelectric nanogenerators (TENGs) are emerging as a pulse wave monitoring biotechnology due to their compelling characteristics, including being self-powered, light-weight, and wear-resistant, as well as featuring user-friendliness and superior sensitivity. Herein, a comprehensive review is conducted on the progress of wearable TENGs for pulse wave monitoring. Firstly, the four modes of operation of TENG are briefly described. Secondly, TENGs for pulse wave monitoring are classified into two categories, namely wearable flexible film-based TENG sensors and textile-based TENG sensors. Next, the materials, fabrication methods, working mechanisms, and experimental performance of various TENG-based sensors are summarized. It concludes by comparing the characteristics of the two types of TENGs and discussing the potential development and challenges of TENG-based sensors in the diagnosis of cardiovascular diseases and personalized healthcare.

Flexible Self-Powered Energy Systems Based on H2 O/Ni2+ Intercalated Nix V2 O5 ⋅ nH2 O

The development of portable electronic devices has created greater demands for multifunctional energy integration systems. Self-powered systems have gained widespread interest because they can collect and storage renewable environmental energy and provide stable electricity to electronic devices. Herein, we developed a flexible self-charging energy system, involving textile-based zinc-ion hybrid (ZIHC) and triboelectric nanogenerator (TENG), which demonstrates wearable, compatibility, lightweight and can quickly harvest and store energy. Nix V2 O5  ⋅ nH2 O (NVO) loaded on carbon cloth (CC) with Ni2+ /H2 O ions intercalated as the cathode was assembled with activated CC to form a ZIHC, which has a voltage range of 2.0 V and capacitance value of 267.1 mF cm-2 as well as good charge and discharge rates and excellent cycling stability. At the same time, the NVO/CC can be assembled with PDMS to form a TENG achieving a maximum instantaneous power of 18.5 mW cm-2 . The device can be flexibly worn over the body to continuously harvest and store biomechanical energy and charge the electronic wristwatch successfully. This work demonstrates great convenience and promising practical applications as sustainable flexible energy system for portable electronic devices.