Design and catalytic application of Ag-Au nanoprisms: enhancing A3 coupling efficiency with minimal gold concentration

A novel bimetallic Ag-Au nanoprism incorporating trace levels of gold (ppm range) was synthesized via a wet-chemical method. The material was comprehensively characterized using transmission electron microscopy (TEM), scanning electron microscopy (SEM) mapping, X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD). This new nanostructure exhibits a remarkable synergistic interaction between the silver nanoprism and meager amounts of gold, resulting in highly efficient catalytic activity for the A3 coupling reaction involving aldehydes, alkynes, and amines. The reaction proceeds efficiently in water at 60 °C, accommodating a broad substrate scope and showcasing its versatility. Notably, the catalytic system achieves excellent performance even at ultralow gold loadings (80 ppm), highlighting its cost-effectiveness and sustainability. Furthermore, the catalyst demonstrates robust reusability, retaining its activity over four consecutive cycles in aqueous media.

Photoredox Radical Cyclization of o-Vinylaryl Isocyanides and Aryldiazonium Tetrafluoroborates for the Synthesis of 2,4-Disubstituted Quinolines

Quinolines, a significant part of nitrogen-containing heterocycles, are widely found in functional compounds. Herin, a photochemical radical cyclization reaction of o-vinylaryl isocyanides and aryldiazonium tetrafluoroborates, has been reported to build 2,4-diaryl quinolines. Readily accessible aryl diazonium salts were utilized as aryl radical precursors at room temperature. This approach allowed good functional group tolerance and substrate applicability.

DABCO-Catalyzed Synthesis of Thiazolidine-2-thiones: System Development and Mechanistic Insights

A base-catalyzed protocol is reported for the construction of 1,3-thiazolidine-2-thione scaffolds bearing quaternary carbon centers from carbon disulfide and α-tertiary propargylamines. The reaction proceeds using low catalyst loading, under ambient temperatures, and in the absence of solvent. Various α-tertiary propargylamines have been employed, affording a series of previously unreported thiazolidine-2-thione compounds and avoiding purification via column chromatography in certain cases. We also describe a one-pot strategy for the synthesis of the same products through a KA2 coupling-CS2 incorporation approach. The reaction mechanism and substituent-dependent catalytic behavior were studied through a combination of detailed experimental and computational studies.

Sustainable protocol for Cu-catalysed A3-coupling under solvent-free conditions

A Cu-catalyzed three-component cascade reaction has been developed, involving ortho-alkynylaryl aldehydes, terminal alkynes and aliphatic/aromatic amines or diamines. This diversity oriented methodology successfully delivered a rich library of 72 molecules in good to excellent yields (yields up to 99%) through the application of an A3-coupling reaction. This method is green, straightforward to execute, requires a short reaction time (2 min-4 h), does not require solvents or harsh or inert conditions, i.e. can be performed in open air, and utilizes only a small amount of a cheap and readily available catalyst (2.5 to 10 mol% CuI). It proficiently produced a variety of biphenylacetylene tethered propargylamines, alkyne tethered dihydroisoquinolines, and N-fused benzimidazoles with excellent regioselectivity.

Copper-Catalyzed Three-Component Tandem Cyclization for One-Pot Synthesis of Indole-Benzofuran Bis-Heterocycles

A one-pot, three-component synthesis of indole-benzofuran bis-heterocycles from terminal alkynes, salicylaldehydes, and indoles has been developed via copper-catalyzed tandem annulation. This catalytic system utilizes readily available starting materials, enabling predictable synthesis of indole-benzofuran bis-heterocycles with broad substrate versatility, excellent regiocontrol, and gram-scale amenability. The reaction proceeds via a sequential pathway involving A3 coupling, 1,4-conjugate addition, and 5-exo-dig cyclization.

Organophosphates as Versatile Substrates in Organic Synthesis

This review summarizes the applications of organophosphates in organic synthesis. After a brief introduction, it discusses cross-coupling reactions, including both transition-metal-catalyzed and transition-metal-free substitution reactions. Subsequently, oxidation and reduction reactions are described. In addition, this review highlights the applications of organophosphates in the synthesis of natural compounds, demonstrating their versatility and importance in modern synthetic chemistry.

Synthesis of fusidane triterpenoid Mannich bases as potential antibacterial and antitumor agents

Mannich bases (8 examples) were synthesized via aminomethylation of fusidane propargyl esters. In vitro antimicrobial screening against key ESKAPE pathogens showed that the fusidic acid based Mannich products exhibit a high antimicrobial effect against Gram-positive bacteria Staphylococcus aureus and the fungus Cryptococcus neoformans. Moreover, the cytotoxic effect of fusidic acid and its analogs, which showed high antibacterial activity, was determined by MTT assay on cancer HepG2, HCT-116, SH-SY5Y, MCF-7, A549 and conditionally normal cells HEK293. A remarkable cytotoxic activity of fusidic acid propargyl ester and its aminomethylene derivatives against cancer and nontumoral HEK293 cells with IC50 values within 4.2-25 µM was found.

FeCl3-Catalyzed Decyanative [4 + 2] Annulation of α-Aminonitriles with Alkynes: Access to 2,4-Diaryl Quinolines in Batch and Continuous-Flow Processes

FeCl₃-catalyzed decyanation of α-aminonitriles followed by a [4 + 2] annulation with terminal alkynes has been developed to synthesize 2,4-diaryl quinolines. A broad range of aniline, aldehyde, and arylacetylene derivatives were well tolerated to access 2,4-diaryl quinolines in moderate to good yields. The control experiment studies suggested that the reaction proceeds through a nonradical pathway involving Povarov-type [4 + 2] annulation from the in situ generated iminium species. The synthetic application of this strategy (i) includes gram-scale synthesis and (ii) a continuous-flow process for a few representative compounds in a shorter reaction time (22 min) and (iii) worked well with styrene as a proof of concept.

Tetra(phenylethynyl)tin Is a New Reagent for Solvent-Free Alkynylation of Imines

The first ZnCl2-catalyzed alkynylation of aldimines with tetra(phenylethynyl)tin was achieved under solvent-free conditions. The present methodology provides propargylamines in 38–62% yields.

A metal-free BF3·OEt2 mediated chemoselective protocol for the synthesis of propargylic cyclic imines

A chemoselective and metal/additive-free protocol for the synthesis of propargylic cyclic imine derivatives via (3 + 2)-cycloaddition of donor-acceptor cyclopropanes and alkynylnitriles in the presence of BF₃·OEt₂ has been established. The newly developed methodology provided access to a variety of propargylic cyclic imines in good to excellent yields. In addition, the synthesis of propargylic amines and the corresponding very stable enol derivatives from the title compound is also explored.

Spray-Assisted Interfacial Polymerization to Form CuII/I@CMC-PANI Film: An Efficient Dip Catalyst for A3 Reaction

A novel and interesting method for the preparation of carboxymethylcellulose-polyaniline film-supported copper catalyst (CuII/I@CMC-PANI) has been developed via spray-assisted interfacial polymerization. Using copper sulfate as an initiator, spraying technology was introduced to form a unique interface that is perfectly beneficial to the polymerization of aniline monomers onto carboxymethylcellulose macromolecule chains. To further confirm the composition and structure of the as-prepared hybrid film, it was systematically characterized by inductively coupled plasma (ICP), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and thermogravimetric analysis (TGA) techniques. The Cu content in the fresh CuII/I@CMC-PANI film was determined to be 1.805 mmol/g, and spherical nanoparticles with an average size of ca. 10.04 nm could be observed in the hybrid film. The CuII/I@CMC-PANI hybrid film was exerted as a dip catalyst to catalyze the aldehyde-alkyne-amine (A3) coupling reactions. High yields of the products (up to 97%) were obtained in this catalytic system, and the catalyst could be easily picked up from the reaction mixture by tweezers and reused for at least six consecutive runs, without any discernible losses in its activity in the model reaction. The dip catalyst of CuII/I@CMC-PANI, with easy fabrication, convenient deployment, superior catalytic activity, and great reusability, is expected to be very useful in organic synthesis.

An Enzymatic Platform for Primary Amination of 1-Aryl-2-alkyl Alkynes

Propargyl amines are versatile synthetic intermediates with numerous applications in the pharmaceutical industry. An attractive strategy for efficient preparation of these compounds is nitrene propargylic C(sp3)-H insertion. However, achieving this reaction with good chemo-, regio-, and enantioselective control has proven to be challenging. Here, we report an enzymatic platform for the enantioselective propargylic amination of alkynes using a hydroxylamine derivative as the nitrene precursor. Cytochrome P450 variant PA-G8 catalyzing this transformation was identified after eight rounds of directed evolution. A variety of 1-aryl-2-alkyl alkynes are accepted by PA-G8, including those bearing heteroaromatic rings. This biocatalytic process is efficient and selective (up to 2610 total turnover number (TTN) and 96% ee) and can be performed on preparative scale.

Supported metals on porous solids as heterogeneous catalysts for the synthesis of propargylamines

This perspective summarizes recent developments in the synthesis of propargylamines using porous solids (zeolites, MOFs and carbon) as supports/catalysts.

Microwave-assisted decarboxylative reactions: advanced strategies for sustainable organic synthesis

Recent advances in the microwave-assisted decarboxylative reactions of carboxylic acids and their derivatives, including transition-metal-catalyzed and metal-free approaches, are summarized.

Catalytic Approaches to Multicomponent Reactions: A Critical Review and Perspectives on the Roles of Catalysis

In this review, we comprehensively describe catalyzed multicomponent reactions (MCRs) and the multiple roles of catalysis combined with key parameters to perform these transformations. Besides improving yields and shortening reaction times, catalysis is vital to achieving greener protocols and to furthering the MCR field of research. Considering that MCRs typically have two or more possible reaction pathways to explain the transformation, catalysis is essential for selecting a reaction route and avoiding byproduct formation. Key parameters, such as temperature, catalyst amounts and reagent quantities, were analyzed. Solvent effects, which are likely the most neglected topic in MCRs, as well as their combined roles with catalysis, are critically discussed. Stereocontrolled MCRs, rarely observed without the presence of a catalytic system, are also presented and discussed in this review. Perspectives on the use of catalytic systems for improved and greener MCRs are finally presented.

Copper nanocatalysts applied in coupling reactions: a mechanistic insight

Copper-based nanocatalysts have seen great interest for use in synthetic applications since the early 20th century, as evidenced by the exponential number of contributions reported (since 2000, more than 48 000 works published out of about 81 300 since 1900; results from SciFinder using "copper nanocatalysts in organic synthesis" as keywords). These huge efforts are mainly based on two key aspects: (i) copper is an Earth-abundant metal with low toxicity, leading to inexpensive and eco-friendly catalytic materials; and (ii) copper can stabilize different oxidation states (0 to +3) for molecular and nanoparticle-based systems, which promotes different types of metal-reagent interactions. This chemical versatility allows different pathways, involving radical or ionic copper-based intermediates. Thus, copper-based nanoparticles have become convenient catalysts, in particular for couplings (both homo- and hetero-couplings), transformations that are involved in a remarkable number of processes affording organic compounds, which find interest in different fields (medicinal chemistry, natural products, drugs, materials, etc.). Clearly, this richness in reactivity makes understanding the mechanisms more complex. The present review focuses on the analysis of reported contributions using monometallic copper-based nanoparticles as catalytic precursors applied in coupling reactions, paying attention to those shedding light on the reaction mechanism.

Overview on magnetically recyclable ferrite nanoparticles: synthesis and their applications in coupling and multicomponent reactions

Nanocatalysis is an emerging area of research that has attracted much attention over the past few years. It provides the advantages of both homogeneous as well as heterogeneous catalysis in terms of activity, selectivity, efficiency and reusability. Magnetically recoverable nanocatalysts provide a larger surface area for the chemical transformations where the organic groups can be anchored and lead to decrease in the reaction time, increase in the reaction output and improve the atom economy of the chemical reactions. Moreover, magnetic nanocatalysts provide a greener approach towards the chemical transformations and are easily recoverable by the aid of an external magnet for their reusability. This review aims to give an insight into the important work done in the field of magnetically recoverable nanocatalysts and their applications in carbon-carbon and carbon-heteroatom bond formation.

FeCl2 Catalyzed Three-Component Reactions of Phospholes, Pyrrolidine, and Ketones (Aldehydes): Chemoselective Synthesis of 1-Phosphafulvenes

We have developed an unprecedented approach for the synthesis of transient 1-phosphafulvenes through three component reactions of phospholes. The generation of 1-phosphafulvenes was demonstrated by in situ [6 + 4] cycloaddition with 2H-phospholes and [6 + 6] self-dimerization. The [6 + 4] and [6 + 6] reaction pathway could be modulated by the starting ketones and aldehydes. The construction of 1-phosphafulvenes is illustrated by a proposed mechanism combining nucleophilic addition of phospholide to the iminium or isomerized azomethine ylide and a [1,5]-shift of phosphole.