Sequential Growth of 2D/3D Double-Layer Perovskite Films with Superior X-Ray Detection Performance

Synergetic Electrostatic and Steric Effects in α-FAPbI3 Single Crystals For X-Ray Detection and Imaging

It is still challenging to stabilize α-FAPbI3 perovskite for high performance optoelectrical devices. Herein, a novel strategy is proposed utilizing the synergetic electrostatic and steric effect to stabilize the α-FAPbI3 phase and suppress the ion migration. Dimethylamine (DMA+) cations are chosen as the dopant to fabricate FA0.96DMA0.04PbI3 single crystals (SCs). DFT calculations reveal that DMA+ cations can improve the stability of α-FAPbI3 phase in both thermodynamics (lower Gibbs free energy) and kinetics (higher defect formation and migration energy). The resulting SCs exhibit an environmental stability over 100 days and an extraordinary low dark current drift of 3.7 × 10-7 nA cm-1 s-1 V-1, comparable to 2D perovskite SCs. The X-ray detectors have also achieved the-state-of-the-art performance in X-ray detection and imaging. This work demonstrates the significance of electrostatic and steric effects in improving the phase and operational stability of perovskites.

Vertically Oriented Quasi-2D Perovskite Grown In-Situ by Carbonyl Array-Synergized Crystallization for Direct X-Ray Detectors

Quasi-2D perovskite quantum wells are increasingly recognized as promising candidates for direct-conversion X-ray detection. However, the fabrication of oriented and uniformly thick quasi-2D perovskite films, crucial for effective high-energy X-ray detection, is hindered by the inherent challenges of preferential crystallization at the gas-liquid interface, resulting in poor film quality. In addressing this limitation, a carbonyl array-synergized crystallization (CSC) strategy is employed for the fabrication of thick films of a quasi-2D Ruddlesden-Popper (RP) phase perovskite, specifically PEA2MA4Pb5I16. The CSC strategy involves incorporating two forms of carbonyls in the perovskite precursor, generating large and dense intermediates. This design reduces the nucleation rate at the gas-liquid interface, enhances the binding energies of Pb2+ at (202) and (111) planes, and passivates ion vacancy defects. Consequently, the construction of high-quality thick films of PEA2MA4Pb5I16 RP perovskite quantum wells is achieved and characterized by vertical orientation and a pure well-width distribution. The corresponding PEA2MA4Pb5I16 RP perovskite X-ray detectors exhibit multi-dimensional advantages in performance compared to previous approaches and commercially available a-Se detectors. This CSC strategy promotes 2D perovskites as a candidate for next-generation large-area flat-panel X-ray detection systems.

Metal-Halide Perovskite Submicrometer-Thick Films for Ultra-Stable Self-Powered Direct X-Ray Detectors

Metal-halide perovskites are revolutionizing the world of X-ray detectors, due to the development of sensitive, fast, and cost-effective devices. Self-powered operation, ensuring portability and low power consumption, has also been recently demonstrated in both bulk materials and thin films. However, the signal stability and repeatability under continuous X-ray exposure has only been tested up to a few hours, often reporting degradation of the detection performance. Here it is shown that self-powered direct X-ray detectors, fabricated starting from a FAPbBr3 submicrometer-thick film deposition onto a mesoporous TiO2 scaffold, can withstand a 26-day uninterrupted X-ray exposure with negligible signal loss, demonstrating ultra-high operational stability and excellent repeatability. No structural modification is observed after irradiation with a total ionizing dose of almost 200 Gy, revealing an unexpectedly high radiation hardness for a metal-halide perovskite thin film. In addition, trap-assisted photoconductive gain enabled the device to achieve a record bulk sensitivity of 7.28 C Gy-1 cm-3 at 0 V, an unprecedented value in the field of thin-film-based photoconductors and photodiodes for "hard" X-rays. Finally, prototypal validation under the X-ray beam produced by a medical linear accelerator for cancer treatment is also introduced.

Arising 2D Perovskites for Ionizing Radiation Detection

2D perovskites have greatly improved moisture stability owing to the large organic cations embedded in the inorganic octahedral structure, which also suppresses the ions migration and reduces the dark current. The suppression of ions migration by 2D perovskites effectively suppresses excessive device noise and baseline drift and shows excellent potential in the direct X-ray detection field. In addition, 2D perovskites have gradually emerged with many unique properties, such as anisotropy, tunable bandgap, high photoluminescence quantum yield, and wide range exciton binding energy, which continuously promote the development of 2D perovskites in ionizing radiation detection. This review aims to systematically summarize the advances and progress of 2D halide perovskite semiconductor and scintillator ionizing radiation detectors, including reported alpha (α) particle, beta (β) particle, neutron, X-ray, and gamma (γ) ray detection. The unique structural features of 2D perovskites and their advantages in X-ray detection are discussed. Development directions are also proposed to overcome the limitations of 2D halide perovskite radiation detectors.

APbI3-A2AgBiI6 Double-Layer Perovskite Film for a Self-Powered and High-Stability X-ray Detector

The development of lead halide perovskite X-ray detectors has promising applications in medical imaging and security inspection but is hindered by poor long-term stability and drift of the dark current and photocurrent. Herein, we design a (Cs0.05MA0.65FA0.3)PbI3-(Cs0.1MA1.3FA0.6)AgBiI6 double-layer perovskite film to assemble a self-powered flat-panel X-ray detector. The demonstrated X-ray detector achieves an outstanding self-powered sensitivity of 80 μC Gyair-1 cm-2 under a 0 V bias. More importantly, owing to the inhibition of the phase transition process and ion migration of (Cs0.05MA0.65FA0.3)PbI3 by the (Cs0.1MA1.3FA0.6)AgBiI6 layer, the device exhibits excellent continuous operating stability with a retention rate of 99% dark current and photocurrent over X-ray pulses of up to 4000 s and excellent long-term stability without a loss of the original response current after 150 days in an air environment. The strategy of double-layer perovskites improves the stability and sensitivity of devices, which paves a path for the industrial application of lead halide perovskite X-ray detectors.

Dimensionality Engineering of Organic-Inorganic Halide Perovskites for Next-Generation X-Ray Detector

The next-generation X-ray detectors require novel semiconductors with low material/fabrication cost, excellent X-ray response characteristics, and robust operational stability. The family of organic-inorganic hybrid perovskites (OIHPs) materials comprises a range of crystal configuration (i.e., films, wafers, and single crystals) with tunable chemical composition, structures, and electronic properties, which can perfectly meet the multiple-stringent requirements of high-energy radiation detection, making them emerging as the cutting-edge candidate for next-generation X-ray detectors. From the perspective of molecular dimensionality, the physicochemical and optoelectronic characteristics of OIHPs exhibit dimensionality-dependent behavior, and thus the structural dimensionality is recognized as the key factor that determines the device performance of OIHPs-based X-ray detectors. Nevertheless, the correlation between dimensionality of OIHPs and performance of their X-ray detectors is still short of theoretical guidance, which become a bottleneck that impedes the development of efficient X-ray detectors. In the review, the advanced studies on the dimensionality engineering of OIHPs are critically assessed in X-ray detection application, discussing the current understanding on the "dimensionality-property" relationship of OIHPs and the state-of-the-art progresses on the dimensionality-engineered OIHPs-based X-ray detector, and highlight the open challenges and future outlook of this field.

Reconfigurable perovskite X-ray detector for intelligent imaging

X-ray detection is widely used in various applications. However, to meet the demand for high image quality and high accuracy diagnosis, the raw data increases and imposes challenges for conventional X-ray detection hardware regarding data transmission and power consumption. To tackle these issues, we present a scheme of in-X-ray-detector computing based on CsPbBr3 single-crystal detector with convenient polarity reconfigurability, good linear dynamic range, and robust stability. The detector features a stable trap-free device structure and achieves a high linear dynamic range of 106 dB. As a result, the detector could achieve edge extraction imaging with a data compression ratio of ~50%, and could also be programmed and trained to perform pattern recognition tasks with a high accuracy of 100%. Our research shows that in-X-ray-detector computing can be used in flexible and complex scenarios, making it a promising platform for intelligent X-ray imaging.

Perovskite materials in X-ray detection and imaging: recent progress, challenges, and future prospects

Perovskite materials have attracted significant attention as innovative and efficient X-ray detectors owing to their unique properties compared to traditional X-ray detectors. Herein, chronologically, we present an in-depth analysis of X-ray detection technologies employing organic-inorganic hybrids (OIHs), all-inorganic and lead-free perovskite material-based single crystals (SCs), thin/thick films and wafers. Particularly, this review systematically scrutinizes the advancement of the diverse synthesis methods, structural modifications, and device architectures exploited to enhance the radiation sensing performance. In addition, a critical analysis of the crucial factors affecting the performance of the devices is also provided. Our findings revealed that the improvement from single crystallization techniques dominated the film and wafer growth techniques. The probable reason for this is that SC-based devices display a lower trap density, higher resistivity, large carrier mobility and lifetime compared to film- and wafer-based devices. Ultimately, devices with SCs showed outstanding sensitivity and the lowest detectable dose rate (LDDR). These results are superior to some traditional X-ray detectors such as amorphous selenium and CZT. In addition, the limited performance of film-based devices is attributed to the defect formation in the bulk film, surfaces, and grain boundaries. However, wafer-based devices showed the worst performance because of the formation of voids, which impede the movement of charge carriers. We also observed that by performing structural modification, various research groups achieved high-performance devices together with stability. Finally, by fusing the findings from diverse research works, we provide a valuable resource for researchers in the field of X-ray detection, imaging and materials science. Ultimately, this review will serve as a roadmap for directing the difficulties associated with perovskite materials in X-ray detection and imaging, proposing insights into the recent status, challenges, and promising directions for future research.

Identification and Mitigation of Transient Phenomena That Complicate the Characterization of Halide Perovskite Photodetectors

Halide perovskites have shown promise to advance the field of light detection in next-generation photodetectors, offering performance and functionality beyond what is currently possible with traditional inorganic semiconductors. Despite a relatively high density of defects in perovskite thin films, long carrier diffusion lengths and lifetimes suggest that many defects are benign. However, perovskite photodetectors show detection behavior that varies with time, creating inconsistent device performance and difficulties in accurate characterization. Here, we link the changing behavior to mobile defects that migrate through perovskites, leading to detector currents that drift on the time scale of seconds. These effects not only complicate reproducible device performance but also introduce characterization challenges. We demonstrate that such transient phenomena generate measurement artifacts that mean the value of specific detectivity measured can vary by up to 2 orders of magnitude even in the same device. The presence of defects can lead to photoconductive gain in photodetectors, and we show batch-to-batch processing variations in perovskite devices gives varying degrees of charge carrier injection and photocurrent amplification under low light intensities. We utilize the passivating effect of aging to reduce the impact of defects, minimizing current drifts and eliminating the gain. This work highlights the potential issues arising from mobile defects, which lead to inconsistent photodetector operation, and identifies the potential for defects to tune photodetection behavior in perovskite photodetectors.

An interfacial toughening strategy for high stability 2D/3D perovskite X-ray detectors with a carbon nanotube thin film electrode

Single-crystalline metal halide perovskite materials hold great promise for developing next-generation low-dose X-ray detection. To bring this new technology into reality, it is important to improve the durability of perovksite detectors by suppressing the well-known corrosion and ion diffusion problems at the perovskite/electrode interface. For imaging application, it is also imperative to develop new assembling approaches to realise non-planar interconnection between thick perovskite crystals and thin-film transistor (TFT) backplanes. Herein, a flexible and mechanically robust carbon nanotube (CNT) film was proposed to replace noble metal electrodes. The proposed CNT film, whose binder contains a carboxyl group, can form solid contact with a phenethylamine-based two-dimensional (2D) perovskite via amide coupling, thus toughening the perovskite-electrode interface. The resulting CNT/2D-3D perovskite detector shows an applaudable low dark current, high sensitivity, a low dose detection limit and excellent stability, retaining 98% of its initial sensitivity after storage for three months. Moreover, the flexible CNT films are also beneficial for making non-planar interconnection between thick perovskite crystals and TFT backplanes. The proposed flexible CNT thin film electrode thus provides a facile route towards realising a low-dose, high-resolution and highly stable perovskite X-ray detector.

Lattice engineering for stabilized black FAPbI3 perovskite single crystals for high-resolution x-ray imaging at the lowest dose

Preliminary theoretical analyses indicate that lattice relaxation may be used to release lattice strain in the FAPbI3 perovskite to warrant both high x-ray detection performance and improved stability. Herein, we demonstrate stable black α-phase FAPbI3 single crystals (SCs) realized by lattice engineering via annealing in the ambient atmosphere. The engineered α-FAPbI3 SC detector shows almost all the best figures of merit including a high sensitivity of 4.15 × 105 μC Gyair-1 cm-2, a low detection limit of 1.1 nGyair s-1, a high resolution of 15.9 lp mm-1, and a short response time of 214 μs. We further demonstrate high-definition x-ray imaging at a dose rate below 10 nGyair s-1 on the FAPbI3 SC, indicating a minimal dose-area product of 0.048 mGyair cm2 to the patient for one-time posteroanterior chest diagnosis, which is more than 3000 times lower than the international reference level of 150 mGyair cm2. In addition, the robust long-term stability enables the FAPbI3 SC x-ray detector to work steadily for more than 40 years.

Lead-Free Halide Perovskites for Direct X-Ray Detectors

Lead halide perovskites have made remarkable progress in the field of radiation detection owing to the excellent and unique optoelectronic properties. However, the instability and the toxicity of lead-based perovskites have greatly hindered its practical applications. Alternatively, lead-free perovskites with high stability and environmental friendliness thus have fascinated significant research attention for direct X-ray detection. In this review, the current research progress of X-ray detectors based on lead-free halide perovskites is focused. First, the synthesis methods of lead-free perovskites including single crystals and films are discussed. In addition, the properties of these materials and the detectors, which can provide a better understanding and designing satisfactory devices are also presented. Finally, the challenge and outlook for developing high-performance lead-free perovskite X-ray detectors are also provided.

Two-Dimensional Metal Halides for X-Ray Detection Applications

Metal halide perovskites have recently emerged as promising candidates for the next generation of X-ray detectors due to their excellent optoelectronic properties. Especially, two-dimensional (2D) perovskites afford many distinct properties, including remarkable structural diversity, high generation energy, and balanced large exciton binding energy. With the advantages of 2D materials and perovskites, it successfully reduces the decomposition and phase transition of perovskite and effectively suppresses ion migration. Meanwhile, the existence of a high hydrophobic spacer can block water molecules, thus making 2D perovskite obtain excellent stability. All of these advantages have attracted much attention in the field of X-ray detection. This review introduces the classification of 2D halide perovskites, summarizes the synthesis technology and performance characteristics of 2D perovskite X-ray direct detector, and briefly discusses the application of 2D perovskite in scintillators. Finally, this review also emphasizes the key challenges faced by 2D perovskite X-ray detectors in practical application and presents our views on its future development.

Recent Development of Halide Perovskite Materials and Devices for Ionizing Radiation Detection

Ionizing radiation such as X-rays and γ-rays has been extensively studied and used in various fields such as medical imaging, radiographic nondestructive testing, nuclear defense, homeland security, and scientific research. Therefore, the detection of such high-energy radiation with high-sensitivity and low-cost-based materials and devices is highly important and desirable. Halide perovskites have emerged as promising candidates for radiation detection due to the large light absorption coefficient, large resistivity, low leakage current, high mobility, and simplicity in synthesis and processing as compared with commercial silicon (Si) and amorphous selenium (a-Se). In this review, we provide an extensive overview of current progress in terms of materials development and corresponding device architectures for radiation detection. We discuss the properties of a plethora of reported compounds involving organic-inorganic hybrid, all-inorganic, all-organic perovskite and antiperovskite structures, as well as the continuous breakthroughs in device architectures, performance, and environmental stability. We focus on the critical advancements of the field in the past few years and we provide valuable insight for the development of next-generation materials and devices for radiation detection and imaging applications.

Bulk Heterostructure BA2PbI4/MAPbI3 Perovskites for Suppressed Ion Migration To Achieve Sensitive X-ray Detection Performance

Three-dimensional (3D) lead-halide perovskites with outstanding mobility-lifetime products and large attenuation coefficients for X-ray photons have demonstrated highly sensitive X-ray detection. However, there exists severe ion migration, especially under electrical bias, that results in dark-current drift and poorer device stability. Theoretical analyses suggest that 3D perovskites with two-dimensional (2D) perovskites may mitigate ion migration and reduce the dark current to achieve a drastically lower detection limit, which is badly needed for X-ray diagnostics. A bulk 2D/3D perovskite heterostructure is therefore designed and prepared by hot-pressing a mixture of BA₂PbI₄ and MAPbI₃ particles. Compared with the pure MAPbI₃ pellet, the bulk 2D/3D heterostructure pellet shows much higher resistivity, hence, significantly reduced ion migration and a much smaller dark-current drift of 4.84 × 10^-5 nA cm^-1 s^-1 V^-1, which is much lower than that of the pristine MAPbI₃ pellet, thus demonstrating its effectiveness for the suppression of ion migration. The bulk 2D/3D heterostructure pellet attains an X-ray sensitivity of 2.0 × 10³ μC Gy_air^-1 cm^-2 as well as a lower detection limit of 111.76 nGy s^-1 under 10 V bias. This work provides a successful strategy to prepare X-ray detectors with suppressed ion migration and negligible dark current drift, which will further benefit the development of lead-halide perovskite X-ray detectors.

Vertically Oriented Porous PET as Template to Integrated Metal Halide for High-Performance Large-Area and Ultra-Flexible X-Ray Detector

High-performance X-ray detectors have immense potential in medical and security inspections. However, the current X-ray detectors are limited in flexible, high-spatial-resolution large-scale detection, and integration for imaging. Here, nuclear track-etched porous polyethylene terephthalate (PET) is developed as the template for preparing uniform, large-area (≥10⁵ cm² ), and flexible metal halide (MH)-based X-ray detectors. Adjustable high-density vertically oriented porous PET with adjustable thickness can provide proper physical support for flexible thick absorption film, thus improving X-ray absorption ability with excellent bending stability. Moreover, vertical channels can block the ion migration, lateral charge diffusion, and water/oxygen attacks, increasing activation energy for ionic transport, charge collection rate of electrodes, and environmental stability. Hence, the related detectors eventually obtain large sensitivity (6722 µC Gy_air ^-1 cm^-2 ), low detection limit (1.87 nGy_air s^-1 ), and high spatial resolution (5.17 lp mm^-1 ) compared to the detectors without porous PET template. Meanwhile, the device shows no degradation after storage or working under various thermal attacks. MH-filled-PET is also monolithically integrated on the bottom circuit with different MHs and it is applied to single-pixel mode and fast linear-array imaging in a broad range of X-rays photon energy (20 to 160 keV).

Searching for High-Quality Halide Perovskite Single Crystals toward X-ray Detection

Metal halide perovskite materials, which combine outstanding physical properties, large absorption coefficient, tailored composition, and low-cost solution-processing, have aroused wide attention for use in various optoelectronic devices. Recently, perovskite single crystals have been rapidly outpacing traditional semiconductor materials in the field of radiation detection. As a prerequisite, achieving high-quality single crystals under controllable solution-phase growth must be tackled to fulfill their full potential as a new paradigm in this stagnated field. This Perspective summarizes the advances in X-ray detectors based on lead halide perovskite single crystals, presenting a comprehensive picture of the relationship among composition engineering, synthesis, and device properties. Additionally, we share our thoughts on several outstanding challenges of perovskite single crystals as promising X-ray detectors and propose possible approaches to the unresolved issues. We anticipate that this Perspective can open up new opportunities to improve their optoelectronic properties, which confers fascinating photonics applications with above and beyond state-of-the-art performance.

Ultralow Detection Limit and Robust Hard X-ray Imaging Detector Based on Inch-Sized Lead-Free Perovskite Cs3Bi2Br9 Single Crystals

Halide perovskites are promising candidates for soft X-ray detection (<80 keV) owing to their high X-ray absorption coefficient, resistivity, and mobility lifetime product. However, the lack of large high-quality single crystals (SCs) renders it challenging to manufacture robust hard X-ray imaging systems (>100 keV) with a low detection limit and stable dark current. Herein, high-quality inch-size two-dimensional (2D) Cs₃Bi₂Br₉ (CBB) single crystals are grown from a melt via the Bridgman method. The crystal quality is enhanced by eliminating inclusions of CsBr-rich phases and restraining the trap-state density, leading to an enhanced resistivity of 1.41 × 10¹² Ω cm and a mobility lifetime product of 8.32 × 10^-4 cm² V^-1. The Au/CBB/Au single-crystal device exhibits a high sensitivity of 1705 μC Gy_air^-1 cm^-2 in all-inorganic bismuth-based perovskites and an ultralow detection limit of 0.58 nGy_air s^-1 in all of the bismuth-based perovskites for 120 keV hard X-ray detection. The CBB detector exhibits high work stability with an ultralow dark current drift of 2.8 × 10^-10 nA cm^-1 s^-1 V^-1 and long-term air environment reliability under a high electric field of 10 000 V cm^-1 owing to the ultrahigh ionic activation energy of the 2D structure. The proposed robust imaging system based on CBB SC is a promising tool for X-ray medical imaging and diagnostics.

Applications of Halide Perovskites in X-ray Detection and Imaging

X-ray detection plays an extremely significant function in medical diagnosis, nondestructive testing, safety testing, scientific research, environmental monitoring and other practical applications. However, conventional inorganic semiconductors such as amorphous selenium,...