High-Alkaline Water-Splitting Activity of Mesoporous 3D Heterostructures: An Amorphous-Shell@Crystalline-Core Nano-Assembly of Co-Ni-Phosphate Ultrathin-Nanosheets and V- Doped Cobalt-Nitride Nanowires

Optimization of 3D Metal-Based Assemblies for Efficient Electrocatalysis: Structural and Mechanistic Studies

The commercial utilization of low-dimensional catalysts has been hindered by their propensity for agglomeration and stacking, greatly minimizing their utilization of active sites. To circumvent this problem, low-dimensional materials can be assembled into systematic 3D architectures to synergistically retain the benefits of their constituent low-dimensional nanomaterials, with value-added bulk properties such as increased active surface area, improved charge transport pathways, and enhanced mass transfer, leading to higher catalytic activity and durability compared to their constituents. The hierarchical organization of low-dimensional building blocks within 3D structures also enables precise control over the catalyst's morphology, composition, and surface chemistry, facilitating tailored design for specific electrochemical applications. Despite the surge in 3D metal-based assemblies, there are no reviews encompassing the different types of metal-based 3D assemblies from low-dimensional nanomaterials for electrocatalysis. Herein, this review addresses this gap by investigating the various types of self-supported 3D assemblies and exploring how their electrocatalytic performance can be elevated through structural modifications and mechanistic studies to tailor them for various electrochemical reactions.

Tunable B-Doped Cobalt Phosphide Nanosheets Engineered via Phosphorus Activation of Co-MOFs for High Efficiency Alkaline Water-Splitting

Introducing secondary heteroatoms and simultaneous in situ surface modification can enhance electrocatalysts by affecting their porosity for adjusting electrochemically active surface area (ECSA), number of active sites, and electronic properties, thus mitigating the sluggish kinetics of oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in alkaline media. Here, mesoporous 3D heterostructures of boron-doped cobalt phosphide@nitrogen-doped carbon nanosheet network arrays are successfully grown on Ni foam as free-standing bifunctional electrocatalysts with controlled phosphorous levels (B-CoPx@NC/NF, x = 0.25, 0.5, and 1). Boron doping induces the Co active sites to bind O* and OOH* intermediates. Meanwhile, an optimal phosphorous content also leads to ideal adsorption strength at each reaction step, satisfying the Sabatier principle well. The optimal B-CoP0.5@NC/NF requires low overpotentials of 248 mV for OER and 95 mV for HER with long-term stability. The B-CoP0.5@NC/NF (+/-) electrolyzer exhibits a low cell potential of 1.59 V at 10 mA cm-2 for overall water-splitting, with superior activity compared to the RuO2/NF(+)//20%Pt/NF(-) electrolyzer at high current densities above 50 mA cm-2. Such exceptional bifunctional activities are attributed to the modulated electronic structure, lower charge-transfer resistance, higher ECSA, and inductive effect of B-doping, thus boosting both OER and HER activities in alkaline media.

Expanding the frontiers of electrocatalysis: advanced theoretical methods for water splitting

Electrochemical water splitting, which encompasses the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER), offers a promising route for sustainable hydrogen production. The development of efficient and cost-effective electrocatalysts is crucial for advancing this technology, especially given the reliance on expensive transition metals, such as Pt and Ir, in traditional catalysts. This review highlights recent advances in the design and optimization of electrocatalysts, focusing on density functional theory (DFT) as a key tool for understanding and improving catalytic performance in the HER and OER. We begin by exploring DFT-based approaches for evaluating catalytic activity under both acidic and alkaline conditions. The review then shifts to a material-oriented perspective, showcasing key catalyst materials and the theoretical strategies employed to enhance their performance. In addition, we discuss scaling relationships that exist between binding energies and electronic structures through the use of charge-density analysis and d-band theory. Advanced concepts, such as the effects of adsorbate coverage, solvation, and applied potential on catalytic behavior, are also discussed. We finally focus on integrating machine learning (ML) with DFT to enable high-throughput screening and accelerate the discovery of novel water-splitting catalysts. This comprehensive review underscores the pivotal role that DFT plays in advancing electrocatalyst design and highlights its potential for shaping the future of sustainable hydrogen production.

High Catalytic Selectivity of Electron/Proton Dual-Conductive Sulfonated Polyaniline Micropore Encased IrO2 Electrocatalyst by Screening Effect for Oxygen Evolution of Seawater Electrolysis

Acidic seawater electrolysis offers significant advantages in high efficiency and sustainable hydrogen production. However, in situ electrolysis of acidic seawater remains a challenge. Herein, a stable and efficient catalyst (SPTTPAB/IrO2) is developed by coating iridium oxide (IrO2) with a microporous conjugated organic framework functionalized with sulfonate groups (-SO3H) to tackle these challenges. The SPTTPAB/IrO2 presents a -SO3H concentration of 5.62 × 10-4 mol g-1 and micropore below 2 nm numbering 1.026 × 1016 g-1. Molecular dynamics simulations demonstrate that the conjugated organic framework blocked 98.62% of Cl- in seawater from reaching the catalyst. This structure combines electron conductivity from the organic framework and proton conductivity from -SO3H, weakens the Cl- adsorption, and suppresses metal-chlorine coupling, thus enhancing the catalytic activity and selectivity. As a result, the overpotential for the oxygen evolution reaction (OER) is only 283 mV@10 mA cm-2, with a Tafel slope of 16.33 mV dec-1, which reduces 13.8% and 37.8% compared to commercial IrO2, respectively. Impressively, SPTTPAB/IrO2 exhibits outstanding seawater electrolysis performance, with a 35.3% improvement over IrO2 to 69 mA cm-2@1.9 V, while the degradation rate (0.018 mA h-1) is only 24.6% of IrO2. This study offers an innovative solution for designing high-performance seawater electrolysis electrocatalysts.

Deep reconstruction of crystalline-amorphous heterojunction electrocatalysts for efficient and stable water and methanol electrolysis

During electrocatalytic water splitting, surface reconstruction often occurs to generate truly active species for catalytic reactions, but the stability and mass activity of the catalysts is a huge challenge. A method that combines cation doping with morphology control strategies and constructs an amorphous-crystalline heterostructure is proposed to achieve deep reconstruction of the catalyst during the electrochemical activation process, thereby significantly improving catalytic activity and stability. Amorphous iron borate (FeBO) is deposited on cobalt-doped nickel sulfide (Co-Ni3S2) crystals to form ultrathin nanosheet heterostructures (FeBO/Co-Ni3S2) as bifunctional electrocatalysts for the OER and methanol oxidation reaction (MOR). During the OER process, FeBO/Co-Ni3S2 is deeply reconstructed to form a NiFeOOH/Co-Ni3S2 composite structure with ultrathin nanosheets with abundant amorphous-crystalline interfaces to ensure structural stability. Furthermore, Co-Ni3S2 electrocatalysts were synthesized via nickel foam (NF) self-derivation, which resulted in strong adhesion between the catalyst and substrate and formed a hierarchical structure consisting of interconnected nanosheets with excellent mass transfer and abundant active sites to increase the activity and stability of the electrocatalyst. The dual-electrode electrolyzer requires cell voltages of 1.58 and 1.44 V to achieve water and methanol overall electrolysis at a current density of 10 mA cm-2 and keep working over 100 and 25 h, respectively. This strategy provides a new way to promote reconstruction to construct excellent bifunctional electrocatalysts.

Synergistic effects of interface and phase engineering on telluride toward alkaline/neutral hydrogen evolution reaction in freshwater/seawater

The development of efficient, stable, and versatile hydrogen evolution electrocatalysts is of great meaning, but still faces challenging. Interface engineering and phase engineering have been immensely applied in the field of hydrogen evolution reaction (HER) because of their unique physicochemical properties. However, they are typically used separately, which limits their effectiveness. Herein, we propose an interface-engineered CoMo/CoTe electrocatalyst, consisting of an amorphous CoMo (a-CoMo) layer-encapsulated crystalline CoTe array, achieving the profound optimization of catalytic performance. The experimental results and density functional theory calculations show that the d-band center of the catalyst shifts further upward in contrast with its crystalline-crystalline counterpart, optimizing the electronic structure and the intermediate adsorption, thereby reducing the kinetic barrier of HER. The a-CoMo/CoTe with superhydrophilic/superaerophobic features shows excellent catalytic performance in alkaline, neutral, and simulated seawater environments.

High-Entropy Catalysis Accelerating Stepwise Sulfur Redox Reactions for Lithium-Sulfur Batteries

Catalysis is crucial to improve redox kinetics in lithium-sulfur (Li-S) batteries. However, conventional catalysts that consist of a single metal element are incapable of accelerating stepwise sulfur redox reactions which involve 16-electron transfer and multiple Li2Sn (n = 2-8) intermediate species. To enable fast kinetics of Li-S batteries, it is proposed to use high-entropy alloy (HEA) nanocatalysts, which are demonstrated effective to adsorb lithium polysulfides and accelerate their redox kinetics. The incorporation of multiple elements (Co, Ni, Fe, Pd, and V) within HEAs greatly enhances the catalytically active sites, which not only improves the rate capability, but also elevates the cycling stability of the assembled batteries. Consequently, HEA-catalyzed Li-S batteries achieve a high capacity up to 1364 mAh g-1 at 0.1 C and experience only a slight capacity fading rate of 0.054% per cycle over 1000 cycles at 2 C, while the assembled pouch cell achieves a high specific capacity of 1192 mAh g-1. The superior performance of Li-S batteries demonstrates the effectiveness of the HEA catalysts with maximized synergistic effect for accelerating S conversion reactions, which opens a way to catalytically improving stepwise electrochemical conversion reactions.

Anion doping and interfacial effects in B-Ni5P4/Ni2P for promoting urea-assisted hydrogen production in alkaline media

A bifunctional catalyst used for urea oxidation-assisted hydrogen production can efficiently catalyze the urea oxidation reaction (UOR) and hydrogen evolution reaction (HER) simultaneously, thus simplifying electrolytic cell installation and reducing the cost. Constructing the heterointerface of two components or species and doping heteroatom are effective strategies to improve the performance of electrocatalysts, which could regulate the local electronic structure of the catalysts at their interface region, adjust their orbital overlap, and achieve enhanced catalytic performance. In this study, a simple hydrothermal method was studied for the preparation of B-doped Ni5P4/Ni2P heterostructures on nickel foam (B-Ni5P4/Ni2P@NF). Under 1 M KOH at a current density of 10 mA cm-2, an overpotential of 76 mV was obtained for the HER. When 0.3 M urea was added to 1 M KOH, the performance of the prepared catalyst was greatly improved. When the current density reached 10 mA cm-2, the potential was only 1.35 V. In addition, urea-assisted overall water splitting voltage was only 1.41 V. Thus, the B-Ni5P4/Ni2P catalyst possess excellent electrocatalytic activity. The main reason for the excellent properties of the electrocatalyst is the construction of heterostructure, which regulates the electronic structure of the catalyst at its interface and generates a new efficient active site. In addition, the doping of B atoms further promotes the charge transfer rate, thus strengthening the interaction between two phases and improving the catalytic performance. This study provides a simple, environmentally friendly, and rapid design method to prepare an active bi-functional electrocatalyst that has a positive effect on urea-assisted overall water splitting.

Spatial configuration of Fe-Co dual-sites boosting catalytic intermediates coupling toward oxygen evolution reaction

Oxygen evolution reaction (OER) is the pivotal obstacle of water splitting for hydrogen production. Dual-sites catalysts (DSCs) are considered exceeding single-site catalysts due to the preternatural synergetic effects of two metals in OER. However, appointing the specific spatial configuration of dual-sites toward more efficient catalysis still remains a challenge. Herein, we constructed two configurations of Fe-Co dual-sites: stereo Fe-Co sites (stereo-Fe-Co DSC) and planar Fe-Co sites (planar-Fe-Co DSC). Remarkably, the planar-Fe-Co DSC has excellent OER performance superior to stereo-Fe-Co DSC. DFT calculations and experiments including isotope differential electrochemical mass spectrometry, in situ infrared spectroscopy, and in situ Raman reveal the *O intermediates can be directly coupled to form *O-O* rather than *OOH by both the DSCs, which could overcome the limitation of four electron transfer steps in OER. Especially, the proper Fe-Co distance and steric direction of the planar-Fe-Co benefit the cooperation of dual sites to dehydrogenate intermediates into *O-O* than stereo-Fe-Co in the rate-determining step. This work provides valuable insights and support for further research and development of OER dual-site catalysts.

Crystalline Ni5P4/amorphous CePO4 core/shell heterostructure arrays for highly-efficient electrocatalytic overall water splitting

Exploring low-cost and highly efficient bifunctional electrocatalysts for overall water splitting has become a research focus recently. Crystalline/amorphous core/shell heterostructures have great potential for applications in the field of electrocatalytic overall water splitting. However, related research is still challenging. Herein, crystalline Ni5P4 nanosheets/amorphous CePO4 nanocrystals core/shell heterostructure arrays were developed for electrocatalytic overall water splitting. It is shown that the heterostructure array required competitive HER and OER overpotentials of 94 and 191 mV in alkaline environment (10 mA/cm2), respectively. Encouragingly, the symmetrical two-electrode system constructed with the heterostructure array only required an ultra-low cell voltage of 1.535 V to achieve a current density of 10 mA/cm2. This indicates the system has huge potential in overall water splitting. The electrocatalytic mechanism was studied systematically by combining theoretical calculation and experimental characterization. It was found that the surface coating of amorphous CePO4 could not only significantly increase the electrochemical active surface area and improve the charge transfer of crystalline Ni5P4 nanosheets, but could also regulate d-band center of Ni5P4 and optimize the adsorption towards reaction intermediates in water splitting. The results not only provide an excellent crystalline/amorphous core/shell heterostructure bifunctional electrocatalyst for overall water splitting but also greatly expand the application of rare earth metal phosphate CePO4.

The synthesis and application of crystalline-amorphous hybrid materials

Crystalline-amorphous hybrid materials (CA-HMs) possess the merits of both pure crystalline and amorphous phases. Abundant dangling bonds, unsaturated coordination atoms, and isotropic structural features in the amorphous phase, as well as relatively high electronic conductivity and thermodynamic structural stability of the crystalline phase simultaneously take effect in CA-HMs. Furthermore, the atomic and bandgap mismatch at the CA-HM interface can introduce more defects as extra active sites, reservoirs for promoted catalytic and electrochemical performance, and induce built-in electric field for facile charge carrier transport. Motivated by these intriguing features, herein, we provide a comprehensive overview of CA-HMs on various aspects-from synthetic methods to multiple applications. Typical characteristics of CA-HMs are discussed at the beginning, followed by representative synthetic strategies of CA-HMs, including hydrothermal/solvothermal methods, deposition techniques, thermal adjustment, and templating methods. Diverse applications of CA-HMs, such as electrocatalysis, batteries, supercapacitors, mechanics, optoelectronics, and thermoelectrics along with underlying structure-property mechanisms are carefully elucidated. Finally, challenges and perspectives of CA-HMs are proposed with an aim to provide insights into the future development of CA-HMs.

Crystal-Phase Engineering in Heterogeneous Catalysis

The performance of a chemical reaction is critically dependent on the electronic and/or geometric structures of a material in heterogeneous catalysis. Over the past century, the Sabatier principle has already provided a conceptual framework for optimal catalyst design by adjusting the electronic structure of the catalytic material via a change in composition. Beyond composition, it is essential to recognize that the geometric atomic structures of a catalyst, encompassing terraces, edges, steps, kinks, and corners, have a substantial impact on the activity and selectivity of a chemical reaction. Crystal-phase engineering has the capacity to bring about substantial alterations in the electronic and geometric configurations of a catalyst, enabling control over coordination numbers, morphological features, and the arrangement of surface atoms. Modulating the crystallographic phase is therefore an important strategy for improving the stability, activity, and selectivity of catalytic materials. Nonetheless, a complete understanding of how the performance depends on the crystal phase of a catalyst remains elusive, primarily due to the absence of a molecular-level view of active sites across various crystal phases. In this review, we primarily focus on assessing the dependence of catalytic performance on crystal phases to elucidate the challenges and complexities inherent in heterogeneous catalysis, ultimately aiming for improved catalyst design.

Synergistic Promotion of Large-Current Water Splitting through Interfacial Engineering of Hierarchically Structured CoP-FeP Nanosheets with Rich P Vacancies

The development of hydrogen evolution reaction (HER) catalysts with high performance under large current density is still a challenge. Introducing P vacancies in heterostructure is an appealing strategy to enhance HER kinetics. This study investigates a CoP-FeP heterostructure catalyst with abundant P vacancies (Vp-CoP-FeP/NF) on nickel foam (NF), which was prepared using dipping and phosphating treatment. The optimized Vp-CoP-FeP catalyst exerted prominent HER catalytic capability, requiring an ultra-low overpotential (58 mV @ 10 mA cm-2 ) and displaying robust durability (50 h @ 200 mA cm-2 ) in 1.0 M KOH solution. Furthermore, the catalyst demonstrated superior overall water splitting activity as cathode, demanding only cell voltage of 1.76 V at 200 mA cm-2 , outperforming Pt/C/NF(-) || RuO2 /NF(+) . The catalyst's outstanding performance can be attributed to the hierarchical structure of porous nanosheets, abundant P vacancies, and synergistic effect between CoP and FeP components, which promote water dissociation and H* adsorption and desorption, thereby synergically accelerating HER kinetics and enhancing HER activity. This study demonstrates the potential of HER catalysts with phosphorus-rich vacancies that can work under industrial-scale current density, highlighting the importance of developing durable and efficient catalysts for hydrogen production.

Surface Adsorption of Amorphous Phosphate on RuNi-Doped Molybdate for the Hydrogen Evolution Reaction

Developing highly active and cost-effective electrocatalysts is critical for enhancing the intrinsic performance of electrocatalytic water splitting. Oxoanion-based compounds, such as phosphates and molybdates, have emerged as promising electrocatalysts owing to their advantageous properties of nontoxicity, low price, and strong water adsorption ability. However, their relatively inferior activity has impeded extensive investigation into electrochemical applications. Herein, an amorphous phosphate-adsorbed and RuNi-doped molybdate (RuNiMo-P) composite is synthesized on nickel foam (NF) support by using a simple two-step method. Significantly, an acidic solution of phosphomolybdic acid (PMo12), containing a low concentration of Ru, can etch the NF, contributing to the in situ growth of the RuNi-doped molybdate precursor. Subsequent phosphating ensures the surface formation of the amorphous phosphate layer due to abundant oxygen in the precursor. The strong structural interaction between RuNi-doped molybdate and amorphous phosphate in RuNiMo-P prompts an enhanced hydrogen evolution reaction (HER) performance, delivering an overpotential of 38 mV at a current density of -10 mA cm-2, a Tafel slope of 53 mV dec-1, and good stability in an alkaline medium. Characterizations after HER reveal that RuNi doping, partial dissolution of phosphate and molybdate species, and newly formed NiOOH nanosheets can expose active sites, facilitate charge transfer, and modify electronic structures, thereby improving the HER performance effectively.

Metal-Organic Framework-Derived Mesoporous B-Doped CoO/Co@N-Doped Carbon Hybrid 3D Heterostructured Interfaces with Modulated Cobalt Oxidation States for Alkaline Water Splitting

Heteroatom-doped transition metal-oxides of high oxygen evolution reaction (OER) activities interfaced with metals of low hydrogen adsorption energy barrier for efficient hydrogen evolution reaction (HER) when uniformly embedded in a conductive nitrogen-doped carbon (NC) matrix, can mitigate the low-conductivity and high-agglomeration of metal-nanoparticles in carbon matrix and enhances their bifunctional activities. Thus, a 3D mesoporous heterostructure of boron (B)-doped cobalt-oxide/cobalt-metal nanohybrids embedded in NC and grown on a Ni foam substrate (B-CoO/Co@NC/NF) is developed as a binder-free bifunctional electrocatalyst for alkaline water-splitting via a post-synthetic modification of the metal-organic framework and subsequent annealing in different Ar/H2 gas ratios. B-CoO/Co@NC/NF prepared using 10% H2 gas (B-CoO/Co@NC/NF [10% H2 ]) shows the lowest HER overpotential (196 mV) and B-CoO/Co@NC/NF (Ar), developed in Ar, shows an OER overpotential of 307 mV at 10 mA cm-2 with excellent long-term durability for 100 h. The best anode and cathode electrocatalyst-based electrolyzer (B-CoO/Co@NC/NF (Ar)(+)//B-CoO/Co@NC/NF (10% H2 )(-)) generates a current density of 10 mA cm-2 with only 1.62 V with long-term stability. Further, density functional theory investigations demonstrate the effect of B-doping on electronic structure and reaction mechanism of the electrocatalysts for optimal interaction with reaction intermediates for efficient alkaline water-splitting which corroborates the experimental results.

Manganese cobalt sulfide/molybdenum disulfide nanowire heterojunction as an excellent bifunctional catalyst for electrochemical water splitting

Heterointerface engineering enhances catalytic active centers and charge transfer capabilities to increase oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) kinetics. In this study, a novel heterostructure of manganese cobalt sulfide-molybdenum disulfide on nickel foam (MnCo₂S₄-MoS₂/NF) was synthesized via a two-step hydrothermal process. The nanowire-shaped MnCo₂S₄-MoS₂ on NF displayed accelerated charge transfer ability and multiple integrated active sites. When tested in one molar (1 M) potassium hydroxide (KOH) electrolyte, it furnished low overpotentials of 105 and 171 mV for the HER and 220 and 300 mV for the OER at the current densities of 20 and 50 mA cm^-2, respectively. An electrolyzer based on MnCo₂S₄-MoS₂/NF required low operating potentials of 1.41 and 1.49 V to yield the current densities of 10 and 20 mA cm^-2, respectively, surpassing commercial and previously reported catalysts. Density functional theory (DFT) analysis revealed that the MnCo₂S₄-MoS₂ heterostructure possesses the optimal adsorption free energies for the reactants, an extended electroactive surface area, good charge transfer ability, and reasonable density of electronic states close to the Fermi level, all of which contribute to the high activity of catalyst. Thus, heterointerface engineering is a promising strategy for creating efficient catalysts for overall water splitting.

Constructing Molybdenum Phosphide@Cobalt Phosphide Heterostructure Nanoarrays on Nickel Foam as a Bifunctional Electrocatalyst for Enhanced Overall Water Splitting

The construction of multi-level heterostructure materials is an effective way to further the catalytic activity of catalysts. Here, we assembled self-supporting MoS₂@Co precursor nanoarrays on the support of nickel foam by coupling the hydrothermal method and electrostatic adsorption method, followed by a low-temperature phosphating strategy to obtain Mo₄P₃@CoP/NF electrode materials. The construction of the Mo₄P₃@CoP heterojunction can lead to electron transfer from the Mo₄P₃ phase to the CoP phase at the phase interface region, thereby optimizing the charge structure of the active sites. Not only that, the introduction of Mo₄P₃ will make water molecules preferentially adsorb on its surface, which will help to reduce the water molecule decomposition energy barrier of the Mo₄P₃@CoP heterojunction. Subsequently, H* overflowed to the surface of CoP to generate H₂ molecules, which finally showed a lower water molecule decomposition energy barrier and better intermediate adsorption energy. Based on this, the material shows excellent HER/OER dual-functional catalytic performance under alkaline conditions. It only needs 72 mV and 238 mV to reach 10 mA/cm² for HER and OER, respectively. Meanwhile, in a two-electrode system, only 1.54 V is needed to reach 10 mA/cm², which is even better than the commercial RuO₂/NF||Pt/C/NF electrode pair. In addition, the unique self-supporting structure design ensures unimpeded electron transmission between the loaded nanoarray and the conductive substrate. The loose porous surface design is not only conducive to the full exposure of more catalytic sites on the surface but also facilitates the smooth escape of gas after production so as to improve the utilization rate of active sites. This work has important guiding significance for the design and development of high-performance bifunctional electrolytic water catalysts.

Crystalline-Amorphous Interface Coupling of Ni3S2/NiPx/NF with Enhanced Activity and Stability for Electrocatalytic Oxygen Evolution

The rational design of highly efficient and stable electrocatalysts for the oxygen evolution reaction (OER) is an urgent need but remains challenging for various sustainable energy systems. How to adjust the atomic structure and electronic structure of the active center is a key bottleneck problem. Accelerating the electron transfer process and the deep self-reconstruction of active sites could be a cost-effective strategy toward electrocatalytic OER catalyst development. Here, a crystalline-amorphous (c-a) coupled Ni₃S₂/NiP_x electrocatalyst self-supported on nickel foam with an intimate interface was developed via a feasible solvothermal-electrochemistry method. The coupling interface of the crystalline structure with high conductivity and amorphous structure with numerous potential active sites could regulate the electronic structure and optimize the adsorption/desorption of O-containing species, ultimately resulting in high OER catalytic performance. The obtained Ni₃S₂/NiP_x/NF presents a low OER overpotential of 265 mV to obtain 10 mA·cm^-2 and a small Tafel slope of 51.6 mV·dec^-1. Also, the catalyst with the coupled interface exhibited significantly enhanced long-term stability compared to the other two catalysts, with <5% decay in OER activity over 20 h of continuous operation, while that of Ni₃S₂/NF and NiP_x/NF decreased by about 30 and 50%, respectively. This study provides inspiration for other energy conversion reactions in optimizing the performance of catalysts by coupling crystalline-amorphous structures.

Two-dimensional metal-phase layered molybdenum disulfide for electrocatalytic hydrogen evolution reaction

The two-dimensional (2D) basal plane of metal-phase molybdenum disulphide (1T-MoS₂) provides a large area of active sites to significantly reduce the overpotential of the hydrogen evolution reaction (HER), but the long preparation period limits its industrial application. Here, 1T-MoS₂ catalysts derived from molybdenum blue solution (MBS) were prepared in one step using a rapid high-pressure microwave (MW-MoS₂) strategy. This method eliminated the thermodynamic process with a long time required for Mo-O trioxide bond breakage and reduction (Mo^VI → Mo^IV) of the conventional hydrothermal method. Additionally, the introduction of heteroatomic oxygen atoms effectively reduced the build-up of MW-MoS₂ and improved the monolayer/few-layer state and stability. Impressively, MW-MoS₂ has outstanding electrocatalytic performance, with a low overpotential (62 mV) at 10 mA cm^-2 and a small Tafel slope (42 mV dec^-1). This provides a simple strategy for the rapid preparation of a 2D sulphide HER catalyst with performance close to that of commercial Pt/C.

Research Advances in Amorphous-Crystalline Heterostructures Toward Efficient Electrochemical Applications

Interface engineering of heterostructures has proven a promising strategy to effectively modulate their physicochemical properties and further improve the electrochemical performance for various applications. In this context related research of the newly proposed amorphous-crystalline heterostructures have lately surged since they combine the superior advantages of amorphous- and crystalline-phase structures, showing unusual atomic arrangements in heterointerfaces. Nonetheless, there has been much less efforts in systematic analysis and summary of the amorphous-crystalline heterostructures to examine their complicated interfacial interactions and elusory active sites. The critical structure-activity correlation and electrocatalytic mechanism remain rather elusive. In this review, the recent advances of amorphous-crystalline heterostructures in electrochemical energy conversion and storage fields are amply discussed and presented, along with remarks on the challenges and perspectives. Initially, the fundamental characteristics of amorphous-crystalline heterostructures are introduced to provide scientific viewpoints for structural understanding. Subsequently, the superiorities and current achievements of amorphous-crystalline heterostructures as highly efficient electrocatalysts/electrodes for hydrogen evolution reaction, oxygen evolution reaction, supercapacitor, lithium-ion battery, and lithium-sulfur battery applications are elaborated. At the end of this review, future outlooks and opportunities on amorphous-crystalline heterostructures are also put forward to promote their further development and application in the field of clean energy.

In Situ Construction of MnO2-Co3O4 Nanosheet Heterojunctions on Co@NCNT Surfaces for Oxygen Evolution

Electrocatalytic water splitting is still circuitous and controversial because of the lack of highly active electrocatalysts to decrease the overpotential. Herein, we report a feasible method for constructing heterojunctions of MnO₂-Co₃O₄ nanosheets on Co@NCNT support surfaces (MnO₂-Co₃O₄/Co@NCNT) by spontaneous redox reactions. Experimental results indicate that Co embedded in Co@NCNT can be used as the carbon support and anchoring sites for heterojunctions, thus exposing a large number of active sites, adjusting the surface electronic structure, changing the OER rate-determining step of the catalyst, and reducing the reaction energy barrier. Besides, the in situ formation of MnO₂-Co₃O₄ nanosheets on Co@NCNT inhibits the loss and aggregation of the catalyst, leading to robust structural stability. Therefore, the synergistic effects of these factors provide multi-functional active sites to enhance the intrinsic activity and achieve maximum catalytic performances. To deliver a current density of 10 mA cm^-2, the catalyst of MnO₂-Co₃O₄/Co@NCNT achieves an overpotential (η) of 303 mV in 1.0 M KOH media for OER. This simple redox strategy can be easily extended to prepare other ultrathin transition-metal oxide heterojunctions, which could be applied not only for water splitting but also for other energy conversion and storage technologies.

In Situ Growth of Self-Supporting MOFs-Derived Ni2P on Hierarchical Doped Carbon for Efficient Overall Water Splitting

The in situ growth of metal organic framework (MOF) derivatives on the surface of nickel foam is a novel type of promising self-supporting electrode catalyst. In this paper, this work reports for the first time the strategy of in situ growth of Ni-MOF, where the metal source is purely provided by a nickel foam (NF) substrate without any external metal ions. MOF-derived Ni2P/NPC structure is achieved by the subsequent phosphidation to yield Ni2P on porous N, P-doped carbon (NPC) backbone. Such strategy provides the as-synthesized Ni2P/NPC/NF electrocatalyst an extremely low interfacial steric resistance. Moreover, a unique three-dimensional hierarchical structure is achieved in Ni2P/NPC/NF, providing massive active sites, short ion diffusion path, and high electrical conductivity. Directly applied as the electrode, Ni2P/NPC/NF demonstrates excellent electrocatalytic performance towards both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), with low overpotentials of only 58 mV and 208 mV to drive 10 mA cm−2, respectively, in 1 M KOH. Furthermore, Ni2P/NPC/NF acting as the overall water splitting electrodes can generate a current density of 10 mA cm−2 at an ultralow cell voltage of 1.53 V. This simple strategy paves the way for the construction of self-supporting transition metal-based electrocatalysts.

Cerium-Doped CoMn2O4 Spinels as Highly Efficient Bifunctional Electrocatalysts for ORR/OER Reactions

Low-cost and highly efficient electrocatalysts for oxygen reactions are highly important for oxygen-related energy storage/conversion devices (e.g., solar fuels, fuel cells, and rechargeable metal-air batteries). In this work, a range of compositionally-tuned cerium-doped CoMn2O4 (Ce-CMO-X) spinels were prepared via oxidizing precipitation and subsequent crystallization method and evaluated as electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). The Ce modification into the CMO spinels lead to the changes of surface electronic structure. And Ce-CMO-X catalysts display better electrochemical performance than that of pristine CMO spinel. Among them, Ce-CMO-18% shows the best activity. The Ce-CMO-18% processes a higher ratio of Co3+/Co2+, Mn4+/Mn3+, which is beneficial to ORR performance, while the higher content of oxygen vacancies in Ce-CMO-18% make for better OER performance. Thus, the Ce-doped CMO spinels are potential candidates as bifunctional electrocatalysts for both ORR and OER in alkaline environments. Then, the hybrid Ce-CMO-18%/MWCNTs catalyst was also synthesized, which shows further enhanced ORR and OER activities. It displays an ORR onset potential of 0.93 V and potential of 0.84 V at density of 3 mA cm−2 (at 1600 rpm), which is comparable to commercial Pt/C. The OER onset potential and potential at a current density 10 mA cm-2 are 183 mV and 341 mV. The superior electrical conductivity and oxygen functional groups at the surface of MWCNTs can facilitate the interaction between metal oxides and carbon, which promoted the OER and ORR performances significantly.