Ultra-Low Concentration Electrolyte Enabling LiF-Rich SEI and Dense Plating/Stripping Processes for Lithium Metal Batteries

Designing Temperature-Insensitive Solvated Electrolytes for Low-Temperature Lithium Metal Batteries

Lithium metal batteries face problems from sluggish charge transfer at interfaces, as well as parasitic reactions between lithium metal anodes and electrolytes, due to the strong electronegativity of oxygen donor solvents. These factors constrain the reversibility and kinetics of lithium metal batteries at low temperatures. Here, a nonsolvating cosolvent is applied to weaken the electronegativity of donor oxygen in ether solvents, enabling the participation of anionic donors in the solvation structure of Li+. This strategy significantly accelerates the desolvation process of Li+ and reduces the side effects of solvents on interfacial transport and stability. The designed anion-aggregated electrolyte has a unique temperature-insensitive solvation structure and enables lithium metal anodes to achieve a high average Coulombic efficiency at room temperature and -20 °C. A high-loading LiFePO4||Li cell exhibited high reversibility with a 100% capacity retention after 150 cycles at room temperature, -20, and -40 °C. The practical 1 Ah-level LiFePO4||Li pouch-cell delivered 81% and 61% of the capacity at room temperature when charged and discharged at -20 and -40 °C, respectively. This strategy of constructing temperature-insensitive solvation by electronegativity regulation offers a novel approach for developing electrolytes of low-temperature batteries.

Unveiling the Mystery of LiF within Solid Electrolyte Interphase in Lithium Batteries

Over the past decades, significant advances have been made in lithium-ion batteries. However, further requirement on the electrochemical performance is still a powerful motivator to improve battery technology. The solid electrolyte interphase (SEI) is considered as a key component on negative electrode, having been proven to be crucial for the performance, even in safety of batteries. Although numerous studies have focused on SEI in recent years, its specific properties, including structure and composition, remain largely unclear. Particularly, LiF, a common and important component in SEI, has sparked debates among researchers, resulting in divergent viewpoints. In this review, the recent research findings on SEI and delve into the characteristics of the LiF component is aim to consolidated. The cause of SEI formation and the evolution of SEI models is summarized. The distinctive properties of SEI generated on various negative electrodes is further discussed, the ongoing scholarly controversy surrounding the function of LiF within SEI, and the specific physicochemical properties about LiF and its synergistic effect in heterogeneous components. The objective is to facilitate better understanding of SEI and the role of the LiF component, ultimately contributing to the development of Li batteries with enhanced electrochemical performance and safety for battery communities.

Enabling Stable and Low-Strain Lithium Plating/Stripping with 2D Layered Transition Metal Carbides by Forming Li-Zipped MXenes and a Li Halide-Rich Solid Electrolyte Interphase

Two-dimensional (2D) layered materials demonstrate prominent advantage in regulating lithium plating/stripping behavior by confining lithium diffusion/plating within interlayer gaps. However, achieving effective interlayer confined lithium diffusion/plating without compromising the stability of bulk-structural and the solid electrolyte interphase (SEI) remains a considerable challenge. This paper presents an electrochemical scissor and lithium zipper-driven protocol for realizing interlayer confined lithium plating with pretty-low strain and volume change. In this protocol, lithium serves as a "zipper" to reunite the adjacent MXene back to MAX-like phase to markedly enhance the structural stability, and a lithium halide-rich SEI is formed by electrochemically removing the terminals of halogenated MXenes to maintain the stability and rapid lithium ions diffusion of SEI. When the Ti3 C2 I2 serves as the host for lithium plating, the average coulomb efficiency exceeds 97.0 % after 320 lithium plating/stripping cycles in conventional ester electrolyte. Furthermore, a full cell comprising of LiNi0.8 Mn0.1 Co0.1 O2 and Ti3 C2 I2 @Li exhibits a capacity retention rate of 73.4 % after 200 cycles even under high cathode mass-loading (20 mg cm-2 ) and a low negative/positive capacity ratio of 1.4. Our findings advance the understanding of interlayer confined lithium plating in 2D layered materials and provide a new direction in regulating lithium and other metal plating/stripping behaviors.

Artificial LiF-Rich Interface Enabled by In situ Electrochemical Fluorination for Stable Lithium-Metal Batteries

Lithium (Li)-metal batteries are promising next-generation energy storage systems. One drawback of uncontrollable electrolyte degradation is the ability to form a fragile and nonuniform solid electrolyte interface (SEI). In this study, we propose the use of a fluorinated carbon nanotube (CNT) macrofilm (CMF) on Li metal as a hybrid anode, which can regulate the redox state at the anode/electrolyte interface. Due to the favorable reaction energy between the plated Li and fluorinated CNTs, the metal can be fluorinated directly to a LiF-rich SEI during the charging process, leading to a high Young's modulus (~2.0 GPa) and fast ionic transfer (~2.59×10-7  S cm-1 ). The obtained SEI can guide the homogeneous plating/stripping of Li during electrochemical processes while suppressing dendrite growth. In particular, the hybrid of endowed full cells with substantially enhanced cyclability allows for high capacity retention (~99.3 %) and remarkable rate capacity. This work can extend fluorination technology into a platform to control artificial SEI formation in Li-metal batteries, increasing the stability and long-term performance of the resulting material.

Stable Harsh-Temperature Lithium Metal Batteries Enabled by Tailoring Solvation Structure in Ether Electrolytes

For lithium metal batteries (LMBs), the elevated operating temperature results in severe capacity fading and safety issues due to unstable electrode-electrolyte interphases and electrolyte solvation structures. Therefore, it is crucial to construct advanced electrolytes capable of tolerating harsh environments to ensure stable LMBs. Here, we proposed a stable localized high-concentration electrolyte (LHCE) by introducing the highly solvating power solvent diethylene glycol dimethyl ether (DGDME). Computational and experimental evidence discloses that the original DGDME-LHCE shows favorable features for high-temperature LMBs, including high Li+-binding stability, electro-oxidation resistance, thermal stability, and nonflammability. The tailored solvated sheath structure achieves the preferred decomposition of anions, inducing the stable (cathode and Li anode)/interphases simultaneously, which enables a homogeneous Li plating-stripping behavior on the anode side and a high-voltage tolerance on the cathode side. For the Li||Li cells coupled with DGDME-LHCE, they showcase outstanding reversibility (a long lifespan of exceeding 1900 h). We demonstrate exceptional cyclic stability (∼95.59%, 250 cycles), high Coulombic efficiency (>99.88%), and impressive high-voltage (4.5 V) and high-temperature (60 °C) performances in Li||NCM523 cells using DGDME-LHCE. Our advances shed light on an encouraging ether electrolyte tactic for the Li-metal batteries confronted with stringent high-temperature challenges.

A Review of the Relationship between Gel Polymer Electrolytes and Solid Electrolyte Interfaces in Lithium Metal Batteries

Lithium metal batteries (LMBs) are a dazzling star in electrochemical energy storage thanks to their high energy density and low redox potential. However, LMBs have a deadly lithium dendrite problem. Among the various methods for inhibiting lithium dendrites, gel polymer electrolytes (GPEs) possess the advantages of good interfacial compatibility, similar ionic conductivity to liquid electrolytes, and better interfacial tension. In recent years, there have been many reviews of GPEs, but few papers discussed the relationship between GPEs and solid electrolyte interfaces (SEIs). In this review, the mechanisms and advantages of GPEs in inhibiting lithium dendrites are first reviewed. Then, the relationship between GPEs and SEIs is examined. In addition, the effects of GPE preparation methods, plasticizer selections, polymer substrates, and additives on the SEI layer are summarized. Finally, the challenges of using GPEs and SEIs in dendrite suppression are listed and a perspective on GPEs and SEIs is considered.

Improving performances of the electrode/electrolyte interface via the regulation of solvation complexes: a review and prospect

The electrode/electrolyte interface (EEI) is a research hotspot in lithium-ion batteries, while the electrolyte solvation complex can be regarded as a factor that cannot be ignored in determining the performance of the EEI. From the perspective of the electrolyte solvation complex, this review summarizes the effects of solvation complexes on the composition of an EEI film and the Li⁺ desolvation process, and further clarifies the internal mechanism of the electrolyte composition controlling solvation chemistry. Finally, combined with doubtful points that are not comprehensively considered in the regulation of solvated complexes, this review puts forward some cutting-edge views, which are of great significance for future guidance in improving the performance of lithium-ion batteries.

Effective and Low-Cost In Situ Surface Engineering Strategy to Enhance the Interface Stability of an Ultrahigh Ni-Rich NCMA Cathode

Ultrahigh Ni-rich quaternary layered oxides LiNi_1-x-y-zCo_xMn_yAl_zO₂ (1 - x - y - z ≥ 0.9) are regarded as some of the most promising cathode candidates for lithium-ion batteries (LIBs) because of their high energy density and low cost. However, poor rate capacity and cycling performance severely limit their further commercial applications. Herein, an in situ coating strategy is developed to construct a uniform LiAlO₂ layer. The NH₄HCO₃ solution is added to a NaAlO₂ solution to form a weak alkaline condition, which can reduce the hydrolysis rate of NaAlO₂, thus enabling uniform deposition of Al(OH)₃ on the surface of a Ni_0.9Co_0.07Mn_0.01Al_0.02(OH)₂ (NCMA) precursor. The LiAlO₂-coated samples show enhanced cycling stability and rate capacity. The capacity retention of NCMA increases from 70.7% to 88.3% after 100 cycles at 1 C with an optimized LiAlO₂ coating amount of 3 wt %. Moreover, the 3 wt % LiAlO₂-coated sample also delivers a better rate capacity of 162 mAh g^-1 at 5 C, while that of an uncoated sample is only 144 mAh g^-1. Such a large improvement of the electrochemical performance should be attributed to the fact that a uniform LiAlO₂ coating relieves harmful interfacial parasitic reactions and stabilizes the interface structure. Therefore, this in situ coating approach is a viable idea for the design of higher-energy-density cathode materials.