Molar enamel thickness in the Chacma Baboon,Papio ursinus (kerr 1792)

Hunter-Schreger Band configuration in human molars reveals more decussation in the lateral enamel of 'functional' cusps than 'guiding' cusps

OBJECTIVES

Enamel prism decussation, which manifests as Hunter-Schreger Bands (HSB), is considered a mechanism to mitigate crack propagation. During the chewing cycle, the 'functional' cusps that are involved in Phase II crushing and grinding experience more complex patterns of stress than do those that 'guide' the molars into occlusion (Phase I). This study examines HSB configuration in the lateral enamel of human molars to identify potential differences between these cusps as predicted from their functional distinctions.

DESIGN

Measurements were recorded from scanning electron micrographs of sections through the mesial cusps of unworn permanent molars. For each section, HSB packing density and the relative thickness of decussated enamel were quantified in the cuspal and middle segments of lateral enamel over the guiding and functional cusps.

RESULTS

No clear trend from first to third molars in HSB configuration was found in either jaw. In maxillary molars, the functional cusp displays higher HSB packing density in the cuspal and middle segments, and relatively thicker decussated enamel in the cuspal segment than does the guiding cusp. In mandibular molars, the functional cusp displays higher HSB packing density in the middle segment than does the guiding cusp, but no difference in relative thickness was found between them. Enamel of mandibular molars shows weaker decussation than maxillary molars.

CONCLUSIONS

The results suggest that guiding cusps are intrinsically more susceptible to crack propagation than functional cusps in human permanent molars. Structural factors such as enamel decussation should be considered when interpreting enamel chipping patterns in dietary contexts.

Feeding ecology of the last European colobine monkey, Dolichopithecus ruscinensis

Currently, very little is known about the ecology of extinct Eurasian cercopithecids. Dietary information is crucial in understanding the ecological adaptations and diversity of extinct cercopithecids and the evolution of this family. For example, the colobine genus Dolichopithecus is represented by multiple large-bodied species that inhabited Eurasia during the Pliocene-Early Pleistocene. The available evidence, though limited, suggests semiterrestrial locomotion, which contrasts with most extant African and Asian colobines that exhibit morphological and physiological adaptations for arboreality and folivory. These differences raise questions regarding the dietary specialization of early colobine taxa and how/if that influenced their dispersion out of Africa and into Eurasia. To further our understanding of the ecology of Plio-Pleistocene cercopithecids, we characterized the dental capabilities and potential dietary adaptations of Dolichopithecus ruscinensis through dental topographic and enamel thickness analyses on an M¹ from the locality of Serrat d'en Vacquer, Perpignan (France). We also assessed the feeding behavior of D. ruscinensis through dental microwear texture analysis on a broad sample of fossil molars from fossil sites in France, Greece, Bulgaria, and Romania. Dental topographic and enamel thickness analyses suggest that D. ruscinensis could efficiently process a wide range of foods. Results of the dental microwear texture analysis suggest that its diet ranged from folivory to the consumption of more mechanically challenging foods. Collectively, this suggests a more opportunistic feeding behavior for Dolichopithecus than characteristic of most extant colobines.

Enamel thickness variation in the deciduous dentition of extant large-bodied hominoids

OBJECTIVES

Enamel thickness features prominently in hominoid evolutionary studies. To date, however, studies of enamel thickness in humans, great apes, and their fossil relatives have focused on the permanent molar row. Comparatively little research effort has been devoted to tissue proportions within deciduous teeth. Here we attempt to fill this gap by documenting enamel thickness variation in the deciduous dentition of extant large-bodied hominoids.

MATERIALS AND METHODS

We used microcomputed tomography to image dental tissues in 80 maxillary and 78 mandibular deciduous premolars of Homo sapiens, Pan troglodytes, Gorilla, and Pongo. Two-dimensional virtual sections were created from the image volumes to quantify average (AET) and relative (RET) enamel thickness, as well as its distribution across the crown.

RESULTS

Our results reveal no significant differences in enamel thickness among the great apes. Unlike the pattern present in permanent molars, Pongo does not stand out as having relatively thicker-enameled deciduous premolars than P. troglodytes and Gorilla. Humans, on the other hand, possess significantly thicker deciduous premolar enamel in comparison to great apes. Following expectations from masticatory biomechanics, we also find that the "functional" side (protocone, protoconid) of deciduous premolars generally possesses thicker enamel than the "nonfunctional" side.

DISCUSSION

Our study lends empirical support to anecdotal observations that patterns of AET and RET observed for permanent molars of large-bodied apes do not apply to deciduous premolars. By documenting enamel thickness variation in hominoid deciduous teeth, this study provides the comparative context to interpret rates and patterns of wear of deciduous teeth and their utility in life history reconstructions.

3D enamel thickness in Neandertal and modern human permanent canines

Enamel thickness figures prominently in studies of human evolution, particularly for taxonomy, phylogeny, and paleodietary reconstruction. Attention has focused on molar teeth, through the use of advanced imaging technologies and novel protocols. Despite the important results achieved thus far, further work is needed to investigate all tooth classes. We apply a recent approach developed for anterior teeth to investigate the 3D enamel thickness of Neandertal and modern human (MH) canines. In terms of crown size, the values obtained for both upper and lower unworn/slightly worn canines are significantly greater in Neandertals than in Upper Paleolithic and recent MH. The 3D relative enamel thickness (RET) is significantly lower in Neandertals than in MH. Moreover, differences in 3D RET values between the two groups appear to decrease in worn canines beginning from wear stage 3, suggesting that both the pattern and the stage of wear may have important effects on the 3D RET value. Nevertheless, the 3D average enamel thickness (AET) does not differ between the two groups. In both groups, 3D AET and 3D RET indices are greater in upper canines than in lower canines, and overall the enamel is thicker on the occlusal half of the labial aspect of the crown, particularly in MH. By contrast, the few early modern humans investigated show the highest volumes of enamel while for all other components of 3D enamel, thickness this group holds an intermediate position between Neandertals and recent MH. Overall, our study supports the general findings that Neandertals have relatively thinner enamel than MH (as also observed in molars), indicating that unworn/slightly worn canines can be successfully used to discriminate between the two groups. Further studies, however, are needed to understand whether these differences are functionally related or are the result of pleiotropic or genetic drift effects.

Wear and its effects on dental topography measures in howling monkeys (Alouatta palliata)

OBJECTIVES

Three dental topography measurements: Dirichlet Normal Energy (DNE), Relief Index (RFI), and Orientation Patch Count Rotated (OPCR) are examined for their interaction with measures of wear, within and between upper and lower molars in Alouatta palliata. Potential inferences of the "dental sculpting" phenomenon are explored.

MATERIALS AND METHODS

Fifteen occluding pairs of howling monkey first molars (15 upper, 15 lower) opportunistically collected from La Pacifica, Costa Rica, were selected to sample wear stages ranging from unworn to heavily worn as measured by the Dentine Exposure Ratio (DER). DNE, RFI, and OPCR were measured from three-dimensional surface reconstructions (PLY files) derived from high-resolution CT scans. Relationships among the variables were tested with regression analyses.

RESULTS

Upper molars have more cutting edges, exhibiting significantly higher DNE, but have significantly lower RFI values. However, the relationships among the measures are concordant across both sets of molars. DER and EDJL are curvilinearly related. DER is positively correlated with DNE, negatively correlated with RFI, and uncorrelated with OPCR. EDJL is not correlated with DNE, or RFI, but is positively correlated with OPCR among lower molars only.

DISCUSSION

The relationships among these metrics suggest that howling monkey teeth adaptively engage macrowear. DNE increases with wear in this sample presumably improving food breakdown. RFI is initially high but declines with wear, suggesting that the initially high RFI safeguards against dental senescence. OPCR values in howling monkey teeth do not show a clear relationship with wear changes.

Intra- and interspecific variation in macaque molar enamel thickness

Enamel thickness has played an important role in studies of primate taxonomy, phylogeny, and functional morphology, although its variation among hominins is poorly understood. Macaques parallel hominins in their widespread geographic distribution, relative range of body sizes, and radiation during the last five million years. To explore enamel thickness variation, we quantified average and relative enamel thickness (AET and RET) in Macaca arctoides, Macaca fascicularis, Macaca fuscata, Macaca mulatta, Macaca nemestrina, and Macaca sylvanus. Enamel area, dentine area, and enamel-dentine junction length were measured from mesial sections of 386 molars scanned with micro-computed tomography, yielding AET and RET indices. Intraspecific sex differences were not found in AET or RET. Macaca fuscata had the highest AET and RET, M. fascicularis showed the lowest AET, and M. arctoides had the lowest RET. The latitudinal distribution of macaque species was associated with AET for these six species. Temperate macaques had thicker molar enamel than did tropical macaques, suggesting that thick enamel may be adaptive in seasonal environments. Additional research is needed to determine if thick enamel in temperate macaques is a response to intensified hard-object feeding, increased abrasion, and/or a broader diet with a greater range of food material properties. The extreme ecological flexibility of macaques may prohibit identification of consistent trends between specific diets and enamel thickness conditions. Such complications of interpretation of ecological variability, dietary diversity, and enamel thickness may similarly apply for fossil Homo species.

Variation in enamel thickness within the genus Homo

Recent humans and their fossil relatives are classified as having thick molar enamel, one of very few dental traits that distinguish hominins from living African apes. However, little is known about enamel thickness in the earliest members of the genus Homo, and recent studies of later Homo report considerable intra- and inter-specific variation. In order to assess taxonomic, geographic, and temporal trends in enamel thickness, we applied micro-computed tomographic imaging to 150 fossil Homo teeth spanning two million years. Early Homo postcanine teeth from Africa and Asia show highly variable average and relative enamel thickness (AET and RET) values. Three molars from South Africa exceed Homo AET and RET ranges, resembling the hyper thick Paranthropus condition. Most later Homo groups (archaic European and north African Homo, and fossil and recent Homo sapiens) possess absolutely and relatively thick enamel across the entire dentition. In contrast, Neanderthals show relatively thin enamel in their incisors, canines, premolars, and molars, although incisor AET values are similar to H. sapiens. Comparisons of recent and fossil H. sapiens reveal that dental size reduction has led to a disproportionate decrease in coronal dentine compared with enamel (although both are reduced), leading to relatively thicker enamel in recent humans. General characterizations of hominins as having 'thick enamel' thus oversimplify a surprisingly variable craniodental trait with limited taxonomic utility within a genus. Moreover, estimates of dental attrition rates employed in paleodemographic reconstruction may be biased when this variation is not considered. Additional research is necessary to reconstruct hominin dietary ecology since thick enamel is not a prerequisite for hard-object feeding, and it is present in most later Homo species despite advances in technology and food processing.

Fracture in teeth: a diagnostic for inferring bite force and tooth function

Teeth are brittle and highly susceptible to cracking. We propose that observations of such cracking can be used as a diagnostic tool for predicting bite force and inferring tooth function in living and fossil mammals. Laboratory tests on model tooth structures and extracted human teeth in simulated biting identify the principal fracture modes in enamel. Examination of museum specimens reveals the presence of similar fractures in a wide range of vertebrates, suggesting that cracks extended during ingestion or mastication. The use of 'fracture mechanics' from materials engineering provides elegant relations for quantifying critical bite forces in terms of characteristic tooth size and enamel thickness. The role of enamel microstructure in determining how cracks initiate and propagate within the enamel (and beyond) is discussed. The picture emerges of teeth as damage-tolerant structures, full of internal weaknesses and defects and yet able to contain the expansion of seemingly precarious cracks and fissures within the enamel shell. How the findings impact on dietary pressures forms an undercurrent of the study.

Inferences regarding the diet of extinct hominins: structural and functional trends in dental and mandibular morphology within the hominin clade

This contribution investigates the evolution of diet in the Pan-Homo and hominin clades. It does this by focusing on 12 variables (nine dental and three mandibular) for which data are available about extant chimpanzees, modern humans and most extinct hominins. Previous analyses of this type have approached the interpretation of dental and gnathic function by focusing on the identification of the food consumed (i.e. fruits, leaves, etc.) rather than on the physical properties (i.e. hardness, toughness, etc.) of those foods, and they have not specifically addressed the role that the physical properties of foods play in determining dental adaptations. We take the available evidence for the 12 variables, and set out what the expression of each of those variables is in extant chimpanzees, the earliest hominins, archaic hominins, megadont archaic hominins, and an inclusive grouping made up of transitional hominins and pre-modern Homo. We then present hypotheses about what the states of these variables would be in the last common ancestor of the Pan-Homo clade and in the stem hominin. We review the physical properties of food and suggest how these physical properties can be used to investigate the functional morphology of the dentition. We show what aspects of anterior tooth morphology are critical for food preparation (e.g. peeling fruit) prior to its ingestion, which features of the postcanine dentition (e.g. overall and relative size of the crowns) are related to the reduction in the particle size of food, and how information about the macrostructure (e.g. enamel thickness) and microstructure (e.g. extent and location of enamel prism decussation) of the enamel cap might be used to make predictions about the types of foods consumed by extinct hominins. Specifically, we show how thick enamel can protect against the generation and propagation of cracks in the enamel that begin at the enamel-dentine junction and move towards the outer enamel surface.

Morphology of the enamel-dentine junction in sections of anthropoid primate maxillary molars

The shape of the enamel-dentine junction (EDJ) in primate molars is regarded as a potential indicator of phylogenetic relatedness because it may be morphologically more conservative than the outer enamel surface (OES), and it may preserve vestigial features (e.g., cuspules, accessory ridges, and remnants of cingula) that are not manifest at the OES. Qualitative accounts of dentine-horn morphology occasionally appear in character analyses, but little has been done to quantify EDJ shape in a broad taxonomic sample. In this study, we examine homologous planar sections of maxillary molars to investigate whether measurements describing EDJ morphology reliably group extant anthropoid taxa, and we extend this technique to a small sample of fossil catarrhine molars to assess the utility of these measurements in the classification of fossil teeth. Although certain aspects of the EDJ are variable within a taxon, a taxon-specific cross-sectional EDJ configuration predominates. A discriminant function analysis classified extant taxa successfully, suggesting that EDJ shape may a reliable indicator of phyletic affinity. When considered in conjunction with aspects of molar morphology, such as developmental features and enamel thickness, EDJ shape may be a useful tool for the taxonomic assessment of fossil molars.

Modern human molar enamel thickness and enamel-dentine junction shape

This study examines cross-sections of molar crowns in a diverse modern human sample to quantify variation in enamel thickness and enamel-dentine junction (EDJ) shape. Histological sections were generated from molars sectioned buccolingually across mesial cusps. Enamel cap area, dentine area, EDJ length, and bi-cervical diameter were measured on micrographs using a digitizing tablet. Nine landmarks along the EDJ were defined, and X and Y coordinates were digitized in order to quantify EDJ shape. Upper molars show greater values for the components of enamel thickness, leading to significantly greater average enamel thickness than in lower molars. Average enamel thickness increased significantly from M1 to M3 in both molar rows, due to significantly increasing enamel cap area in upper molars, and decreasing dentine area in lower molars. Differences in EDJ shape were found among maxillary molars in combined and individual populations. Sex differences were also found; males showed significantly greater dentine area, EDJ length, and bi-cervical diameters in certain tooth types, which resulted in females having significantly thicker average enamel. Differences in enamel thickness and EDJ shape within molars were also found among populations, although few consistent trends were evident. This study demonstrates that enamel thickness and EDJ shape vary among molars, between sexes, and among populations; these factors must be considered in the categorization and comparison of ape and human molars, particularly when isolated teeth or fossil taxa are included. Human relative enamel thickness encompasses most values reported for fossil apes and humans, suggesting limited taxonomic value when considered alone.

Assessment of the accuracy of dental enamel thickness measurements using microfocal X-ray computed tomography

Tooth enamel thickness has long been an important character in studies of primate and especially hominin phylogeny, taxonomy, and adaptation. Current methods for accurately assessing enamel thickness involve the physical sectioning of teeth, because measurements of enamel thickness using some radiographic techniques are unreliable. However, because destructive methods limit sample sizes and access to important fossil specimens, it is desirable that they be replaced with nondestructive techniques. Although microfocal X-ray computed tomography (mCT) has been used recently in studies of enamel thickness, the accuracy of this technique has yet to be established. The present research compares physical sections to computer-generated mCT sections of teeth from a variety of primate and nonprimate, recent and fossil taxa to examine whether enamel thickness, tooth size, and diagenetic remineralization (fossilization) impact the ability of mCT to measure enamel thickness accurately. Results indicate that recent teeth of varying size and thickness are clearly and accurately depicted in mCT scans, with measurements from nearly identical planes in physical and mCT sections differing by 3-5%. A fossil papionin molar (ca. 2 Myr) was also accurately measured using mCT scans, although thinner enamel in much older therapsid (ca. 263-241 Myr) teeth could not be distinguished from dentine. mCT is thus an accurate technique for measuring enamel thickness in recent taxa, although heavily mineralized teeth pose an obstacle to the ability of mCT to distinguish dental tissues. Moreover, absolutely thin enamel (less than approximately 0.10 mm) is difficult to resolve adequately in raw mCT images based on pixel values alone. Therefore, caution must be exercised in the application of mCT to the study of fossilized teeth.

Variation in hominoid molar enamel thickness

Enamel thickness has figured prominently in discussions of hominid origins for nearly a century, although little is known about its intra-taxon variation. It has been suggested that enamel thickness increases from first to third molars, perhaps due to varying functional demands or developmental constraints, but this has not been tested with appropriate statistical methods. We quantified enamel cap area (c), dentine area (b), and enamel-dentine junction length (e) in coronal planes of sections through the mesial and distal cusps in 57 permanent molars of Pan and 59 of Pongo, and calculated average (c/e) and relative enamel thickness (([c/e]/ radicalb) * 100). Posteriorly increasing or decreasing trends in each variable and average (AET) and relative enamel thickness (RET) were tested among molars in the same row. Differences between maxillary and mandibular analogues and between mesial and distal sections of the same tooth were also examined. In mesial sections of both genera, enamel cap area significantly increased posteriorly, except in Pan maxillary sections. In distal sections of maxillary teeth, trends of decreasing dentine area were significant in both taxa, possibly due to hypocone reduction. Significant increases in AET and RET posteriorly were found in all comparisons, except for AET in Pongo distal maxillary sections. Several significant differences were found between maxillary and mandibular analogues in both taxa. Relative to their mesial counterparts, distal sections showed increased enamel cap area and/or decreased dentine area, and thus increased AET and RET. This study indicates that when AET and RET are calculated from samples of mixed molars, variability is exaggerated due to the lumping of tooth types. To maximize taxonomic discrimination using enamel thickness, tooth type and section plane should be taken into account. Nonetheless, previous findings that African apes have relatively thinner enamel than Pongo is supported for certain molar positions.