Sexual dimorphism of dental tissues in modern human mandibular molars

How teeth can be used to estimate sexual dimorphism? A scoping review

INTRODUCTION

Teeth are biological structures with a high degree of hardness, density, calcification, and capacity to adapt to extrinsic factors at physical, biological, and physiological levels. Subsequently, they resist for a longer period in deteriorating environmental conditions. With dental analysis, it is possible to acquire biographical data about a person. The aim of this scoping review was to identify publications using human teeth tissues to estimate sexual dimorphism.

METHODS

The scoping review was carried out in the following databases: Jstor, Scielo, Science Direct, PubMed, and Scopus, using ten search strategies in English and guaranteeing completeness and reproducibility of the phases stipulated in the PRISMA guide.

RESULTS

143 studies on sexual dimorphism based on dental tissue traits were included, of which 40.6% (n = 58) were done in Asia and 27.2% (n = 39) in America. 80% of the studies (equivalent to 114 articles) focused their observations and measurements on the dental crown; 4.2% in enamel, dentin, and pulp together; 3.5% in dental pulp; 2.1% in the entire tooth; 2.8% in enamel, root, and the enamel-cementum junction, and only 0.7% in dentin and pulp. In addition, 92.3% of the studies used metric methods, while only 4.9% and 2.8% used biochemical and non-metric method respectively.

CONCLUSION

For sexual dimorphism establishment, enamel has been the most analyzed dental tissue in permanent canines and molars mainly. Likewise, the most widely and accurately used methods for this purpose are the metrics, with the odontometry as the most implemented (intraoral or by using dental plaster models, digital scanning or software) with prediction percentages ranging from 51% to 95.9%. In contrast to biochemical methods, that can achieve the highest precision (up to 100%), the non-metric methods, to a less extent, reported prediction percentages of 58%.

From hunter-gatherers to food producers: New dental insights into the Nile Valley population history (Late Paleolithic-Neolithic)

OBJECTIVES

This study presents biological affinities between the last hunter-fisher-gatherers and first food-producing societies from the Nile Valley. We investigate odontometric and dental tissue proportion changes between these populations from the Middle Nile Valley and acknowledge the biological processes behind them.

MATERIALS AND METHODS

Dental remains of 329 individuals from Nubia and Central Sudan that date from the Late Pleistocene to the mid-Holocene are studied. Using 3D imaging techniques, we investigated outer and inner metric aspects of upper central incisors, and first and second upper molars.

RESULTS

Late Paleolithic and Mesolithic foragers display homogeneous crown dimensions, dental tissue proportions, and enamel thickness distribution. This contrasts with Neolithic trends for significant differences from earlier samples on inner and outer aspects. Finally, within the Neolithic sample differences are found between Nubian and Central Sudanese sites.

DISCUSSION

Substantial dental variation appears to have occurred around 6000 bce in the Nile Valley, coinciding with the emergence of food-producing societies in the region. Archeological and biological records suggest little differences in dietary habits and dental health during this transition. Furthermore, the substantial variations identified here would have happened in an extremely short time, a few centuries at most. This does not support in situ diet-related adaptation. Rather, we suggest these data are consistent with some level of population discontinuity between the Mesolithic and Neolithic samples considered here. Complex settlement processes could also explain the differences between Nubia and Central Sudan, and with previous results based on nonmetric traits.

The Identified Skeletal Collection of the School of Legal Medicine: a contemporary osteological collection housed in Universidad Complutense de Madrid, Spain

ABSTRA

Osteological collections are an important resource for the development of methods to assist in the study of skeletal remains in archeological and/or forensic contexts. The aim is to describe the current characteristics of the Identified Skeletal Collection of the School of Legal Medicine and its historical context. The Identified Skeletal Collection of the School of Legal Medicine of the Complutense University of Madrid consists of 138 male and 95 female individuals, born between 1880 and 1980 and deceased between 1970 and 2009. The minimum age of the sample is perinatal and the maximum age is 97 years. The collection is an essential tool for forensic research, given that its population characteristics can be extrapolated to those of present-day Spain. Access to this collection offers unique teaching opportunities as well as provides the information necessary to develop various lines of research.

Sex estimation by volumetric evaluation of the maxillary canine using cone-beam computed tomographic images

BACKGROUND

Teeth can be a reasonable part of sex estimation in case of being the single evidence available or in doubt although they are not as accurate as bones in sex estimation. The size of teeth is greater in males than in females. In this study, it was aimed to determine cut-off values of the tooth volume (TV) and root volume (RV) of the maxillary canines and to evaluate the validity of the method for discriminating between males and females.

METHODS

Cone beam computed tomography (CBCT) images of 250 individuals aged 18 to 63 years with equal age and sex distribution were assessed retrospectively. The sample divided into reference set including 168 images of 84 females and 84 males and validation set including 82 images of 48 females and 34 males. Receiver operating characteristic (ROC) curve analysis, and Youden's index were used to determine cut-off values of the volumetric measurements and to test the discriminative performance of the method.

RESULTS

The optimal cut-off values of TV ≥ 581 mm3 and RV ≥ 334 mm3 for estimating sex were established from the reference set. The sensitivity (Se), specificity (Sp), and accuracy (Ac) were 0.77 for TV ≥ 581 mm3 while they were 0.82, 0.77, and 0.79 for RV ≥ 334 mm3. When we tested the previously derived cut-off values of TV of the maxillary canine, the Se, Sp, and Ac were found to be respectively 0.71, 0.90, and 0.82 for TV ≥ 619 mm3 and 0.97, 0.27, and 0.56 for TV ≥ 510 / 460 mm3 (right/left).

CONCLUSIONS

The identified cut-off values of TV and RV of the maxillary canines can be used to estimate sex with moderate accuracy when the only evidence available is teeth or in case of doubt. The method's applicability should be assessed for different populations.

Measuring Dental Enamel Thickness: Morphological and Functional Relevance of Topographic Mapping

The interest in the development of dental enamel thickness measurement techniques is connected to the importance of metric data in taxonomic assessments and evolutionary research as well as in other directions of dental studies. At the same time, advances in non-destructive imaging techniques and the application of scanning methods, such as micro-focus-computed X-ray tomography, has enabled researchers to study the internal morpho-histological layers of teeth with a greater degree of accuracy and detail. These tendencies have contributed to changes in established views in different areas of dental research, ranging from the interpretation of morphology to metric assessments. In fact, a significant amount of data have been obtained using traditional metric techniques, which now should be critically reassessed using current technologies and methodologies. Hence, we propose new approaches for measuring dental enamel thickness using palaeontological material from the territories of northern Vietnam by means of automated and manually operated techniques. We also discuss method improvements, taking into account their relevance for dental morphology and occlusion. As we have shown, our approaches demonstrate the potential to form closer links between the metric data and dental morphology and provide the possibility for objective and replicable studies on dental enamel thickness through the application of automated techniques. These features are likely to be effective in more profound taxonomic research and for the development of metric and analytical systems. Our technique provides scope for its targeted application in clinical methods, which could help to reveal functional changes in the masticatory system. However, this will likely require improvements in clinically applicable imaging techniques.

Sexual dimorphism in odontometric parameters using cone beam CT: a systematic review

OBJECTIVE

To determine whether odontometric parameters using cone beam computed tomography (CBCT) would aid in sex estimation by assessing sexual dimorphism of odontometric parameters.

MATERIAL AND METHODS

The focused question was whether there is sexual dimorphism in linear and volumetric odontometric parameters when assessed using CBCT. The preferred reporting items for systematic reviews and meta-analysis (PRISMA) guidelines were followed to conduct a systematic search until June 2022 in all major databases. Data were extracted regarding the population, size of the sample, age range, teeth analyzed, linear or volumetric measurements, accuracy, and conclusion. The quality of included studies was assessed using (Quality Assessment of Diagnostic Accuracy Studies (QUADAS-2) tool.

RESULTS

Out of the 3761 studies identified, twenty-nine full-text articles were assessed for eligibility. Finally, twenty-three articles (4215 participants) that provided data on odontometrics using CBCT were included in this systematic review. The odontological sex estimation were assessed either linear measurements (n = 13) or volumetric measurements (n = 8) or both (n = 2). Canines were analysed in maximum number of reports (n = 14), followed by incisors (n = 11), molars(n = 10) and premolars(n = 6). Most of the reports (n = 18) confirmed the existence of sexual dimorphism in odontometric parameters when assessed using CBCT. No significant differences in odontometrics between the sexes were noted in some reports (n = 5). The accuracy of sex estimation was assessed in eight investigations, which ranged from 47.8 to 92.3%.

CONCLUSIONS

Odontometrics of human permanent dentition using CBCT exhibit a certain degree of sexual dimorphism. Both linear and volumetric measurements of teeth can aid sex estimation.

Forensic applications of micro-computed tomography: a systematic review

Purpose

The aim of this systematic review was to provide a comprehensive overview of micro-CT current applications in forensic pathology, anthropology, odontology, and neonatology.

Methods

A bibliographic research on the electronic databases Pubmed and Scopus was conducted in the time frame 01/01/2001–31/12/2021 without any language restrictions and applying the following free-text search strategy: “(micro-computed tomography OR micro-CT) AND (forensic OR legal)”. The following inclusion criteria were used: (A) English language; (B) Application of micro-CT to biological and/or non-biological materials to address at least one forensic issue (e.g., age estimation, identification of post-mortem interval). The papers selected by three independent investigators have been then classified according to the investigated materials.

Results

The bibliographic search provided 651 records, duplicates excluded. After screening for title and/or abstracts, according to criteria A and B, 157 full-text papers were evaluated for eligibility. Ninety-three papers, mostly (64) published between 2017 and 2021, were included; considering that two papers investigated several materials, an overall amount of 99 classifiable items was counted when referring to the materials investigated. It emerged that bones and cartilages (54.55%), followed by teeth (13.13%), were the most frequently analyzed materials. Moreover, micro-CT allowed the collection of structural, qualitative and/or quantitative information also for soft tissues, fetuses, insects, and foreign materials.

Conclusion

Forensic applications of micro-CT progressively increased in the last 5 years with very promising results. According to this evidence, we might expect in the near future a shift of its use from research purposes to clinical forensic cases.

Reconstructing tooth crown heights and enamel caps: A comparative test of three existing methods with recommendations for their use

Studies of enamel growth and thickness, whether in paleoanthropology, bioarchaeology, or primatology, require measurements of crown height (CH), cuspal enamel thickness (CET), average (AET), and/or regional enamel thickness (RegAET) on complete, unworn crowns. Yet because fully unworn crowns are uncommon, three methods to bolster sample sizes by reconstructing slightly worn teeth have been developed: Profile, Polynomial, and Pen Tool. Although these methods have been tested for accuracy, no study has yet directly compared the three methods to assess their performance across CH, CET, AET, and RegAET measurements. Moreover, it is currently unclear how accurate the methods are when reconstructing crowns with varying degrees of wear. The present study addresses this gap in our understanding of how these methods perform on four key dental measurements, evaluates the degree of wear for which accurate crown reconstructions can be completed, and offers recommendations for applying these methods. Here, the methods are compared on Paranthropus robustus mandibular molars, a sample chosen because it exhibits variable morphology, presenting a challenge for reconstruction methods. For minimally worn teeth, Profile, Polynomial, and Pen Tool methods can be employed (in that order) for all measurements except CET, which cannot be reliably measured on reconstructions. For teeth with wear that obliterates the nadir of the occlusal basin or dentin horns, CH and AET can be measured using Profile and Polynomial reconstructions; however, no other measurements or methods were reliable. Recommendations provided here will make it possible to increase sample sizes and replicability, enhancing studies of enamel thickness and growth.

Three-Dimensional Dental Analysis for Sex Estimation in the Italian Population: A Pilot Study Based on a Geometric Morphometric and Artificial Neural Network Approach

Dental dimorphism can be used for discriminating sex in forensic contexts. Geometric morphometric analysis (GMA) allows the evaluation of the shape and size, separately, of uneven 3D objects. This study presents experiments using a novel combination of GMA and an artificial neural network (ANN) for sex classification, applied to premolars of Caucasian Italian adults (50 females and 50 males). General Procrustes superimposition (GPS) and the partial least square (PLS) method were performed, respectively, to study the shape variance between sexes and to eliminate landmark variations. The “set-aside” approach was used to assess the accuracy of the proposed neural networks. As the main findings of the pilot study, the proposed method applied to the first upper premolar correctly classified 90% of females and 73% of males of the test sample. The accuracy was 0.84 and 0.80 for the training and test samples, respectively. The sexual dimorphism resulting from GMA was low, although statistically significant. GMA combined with the ANN demonstrated better sex classification ability than previous odontometric or dental morphometric methods. Future research could overcome some limitations by considering a larger sample of subjects and other kinds of teeth and experimenting with the use of computer vision for automatic landmark positioning.

Dimorphism in dental tissues: Sex differences in archaeological individuals for multiple tooth types

OBJECTIVES

Dimorphism in the dentition has been observed in human populations worldwide. However, research has largely focused on traditional linear crown measurements. As imaging systems, such as micro-computed tomography (micro-CT), become increasingly more accessible, new dental measurements such as dental tissue size and proportions can be obtained. This research investigates the variation of dental tissues and proportions by sex in archaeological samples.

MATERIALS AND METHODS

Upper and lower first incisor to second premolar tooth rows were obtained from 30 individuals (n = 300), from 3 archaeological samples. The teeth were micro-CT scanned and surface area and volumetric measurements were obtained from the surface meshes extracted. Dental wear was also recorded and differences between sexes determined.

RESULTS

Enamel and crown measurements were found to be larger in females. Conversely, dentine and root measurements were larger in males.

DISCUSSION

The findings support the potential use of dental tissues to estimate sex of individuals from archaeological samples, while also indicating that individuals aged using current dental aging methods may be underaged or overaged due to sex differences in enamel thickness.

Human permanent tooth sizes are associated with genes encoding oestrogen receptors

OBJECTIVE

To evaluate if genetic polymorphisms in the oestrogen receptor 1 (ESR1) and oestrogen receptor 2 (ESR2) genes encoded for oestrogen receptors alpha (ERα) and beta (ERβ) are involved in permanent tooth size.

DESIGN

Cross-sectional study.

SETTING

Orthodontic Clinic at School of Dentistry of Ribeirão Preto, University of São Paulo.

PARTICIPANTS

A total of 108 orthodontic patients.

MATERIALS AND METHODS

Pre-treatment orthodontic records were evaluated. Dental casts were used to determine the maximum crown measurements of fully erupted permanent teeth in the mesiodistal dimensions. Second and third molars were not included in the analysis. Genomic DNA samples were used for the genotyping of four genetic polymorphisms: ESR1 (rs9340799 and rs2234693) and ESR2 (rs1256049 and rs4986938). The associations between tooth size and sex were evaluated using t test. The associations between tooth size and genotype were analysed with linear regression and adjusted by sex at an alpha of P⩽0.05.

RESULTS

Female patients presented smaller tooth size than male patients. A statistically significant difference was observed in almost all teeth (P<0.05). The genetic polymorphisms in rs9340799, rs2234693, rs1256049 and rs4986938 were associated with some tooth sizes in both the maxilla and mandible (P<0.05).

CONCLUSION

This study provides evidence that genetic polymorphisms in ESR1 and ESR2 could be associated with tooth size in permanent teeth.

Crown tissue proportions and enamel thickness distribution in the Middle Pleistocene hominin molars from Sima de los Huesos (SH) population (Atapuerca, Spain)

Dental enamel thickness, topography, growth and development vary among hominins. In Homo, the thickness of dental enamel in most Pleistocene hominins display variations from thick to hyper-thick, while Neanderthals exhibit proportionally thinner enamel. The origin of the thin trait remains unclear. In this context, the Middle Pleistocene human dental assemblage from Atapuerca-Sima de los Huesos (SH) provides a unique opportunity to trace the evolution of enamel thickness in European hominins. In this study, we aim to test the hypothesis if the SH molar sample approximates the Neanderthal condition for enamel thickness and/or distribution. This study includes 626 molars, both original and comparative data. We analysed the molar inner structural organization of the original collections (n = 124), belonging to SH(n = 72) and modern humans from Spanish origin (n = 52). We compared the SH estimates to those of extinct and extant populations of the genus Homo from African, Asian and European origin (estimates extracted from literature n = 502). The comparative sample included maxillary and mandibular molars belonging to H. erectus, East and North African Homo, European Middle Pleistocene Homo, Neanderthals, and fossil and extant H. sapiens. We used high-resolution images to investigate the endostructural configuration of SH molars (tissue proportions, enamel thickness and distribution). The SH molars exhibit on average thick absolute and relative enamel in 2D and 3D estimates, both in the complete crown and the lateral enamel. This primitive condition is shared with the majority of extinct and extant hominin sample, except for Neanderthals and some isolated specimens. On the contrary, the SH molar enamel distribution maps reveal a distribution pattern similar to the Neanderthal signal (with thicker enamel on the lingual cusps and more peripherally distributed), compared to H. antecessor and modern humans. Due to the phylogenetic position of the SH population, the thick condition in molars could represent the persistence of the plesiomorphic condition in this group. Still, more data is needed on other Early and Middle Pleistocene populations to fully understand the evolutionary meaning of this trait.

Sexual dimorphism of the enamel and dentine dimensions of the permanent canines of the Middle Pleistocene hominins from Sima de los Huesos (Burgos, Spain)

Sexual dimorphism is an important component of the total variation seen in populations and plays a key role in taxonomic debates. In this study, microtomographic (microcomputed tomography) techniques were applied to a sample of hominin teeth from the Sima de los Huesos site (Spain). Dental tissue proportions of the permanent canines were assessed to characterize the pattern and degree of sexual dimorphism within this population. In addition, the possible similarities and differences with the Homo neanderthalensis remains from Krapina (Croatia) and with a recent modern human sample were evaluated. A combination of classical statistical approaches with more novel techniques allowed us not only to ratify the sex allocation of the individuals previously assigned in the literature but also to estimate the sex of the youngest individuals, which were not assessed in previous studies. Likewise, the sexes of certain extensively worn canines and isolated pieces were estimated. As a result, the sex ratio observed in our dental sample from the Sima de los Huesos population is 5:9 (N_m:N_f). In general terms, both Sima de los Huesos and Krapina dental samples have a degree of sexual dimorphism in their permanent canine tissue proportions that does not surpass that of modern humans. The marked dimorphic root volume of Sima de los Huesos mandibular canines is the exception, which surpasses the modern human mean, although it falls within the 95% confidence interval. Therefore, our results do not support that dental tissue proportions of the European Middle Pleistocene populations were more dimorphic than in modern humans. However, the differences in canine tissue proportions are great enough to allow sex estimation with a high degree of confidence.

Enamel thickness and growth rates in modern human permanent first molars over a 2000 year period in Britain

OBJECTIVES

This study explores variation and trends in first molar enamel thickness and daily enamel secretion rates over a 2000 year period in Britain.

METHODS

Permanent first molars (n = 89) from the Roman, Anglo-Saxon, and Medieval periods, as well as modern-day Britain, were analyzed using standard histological methods. Relative enamel thickness (RET) and linear measurements of cuspal and lateral thickness were calculated for mesial cusps. Daily secretion rates (DSRs) were calculated for inner, mid, and outer enamel regions in both cuspal and lateral enamel. Significant differences and trends were identified between samples using nonparametric statistical tests.

RESULTS

Enamel thickness differed between some populations, but no temporal trends were identified. Early Anglo-Saxon molars had significantly thinner RET than both Late Anglo-Saxon (p < .00) and Medieval (p < .00) molars. Lateral enamel from the Roman molars was significantly thinner than the modern-day sample (p = .04). In contrast, a significant slowing trend in DSRs was observed across the more ancient to modern-day samples in every measured region except the mid-lateral enamel region.

DISCUSSION

This study presents the first evidence for a gradual slowing in the daily rate that enamel is secreted in molars over the past 2000 years in Britain. However, this trend was not matched by consistent or significant positive or negative shifts in enamel thickness. These findings suggest that modern human molars of similar enamel thickness, from different modern and ancient populations, formed at different rates.