“Triazolbrücke”: ein Disulfidbrückenersatz durch Ruthenium- katalysierte Bildung von 1,5-disubstituierten 1,2,3-Triazolen

Diarylethene-Based Photoswitchable Inhibitors of Serine Proteases

A bicyclic peptide scaffold was chemically adapted to generate diarylethene-based photoswitchable inhibitors of serine protease Bos taurus trypsin 1 (T1). Starting from a prototype molecule-sunflower trypsin inhibitor-1 (SFTI-1)-we obtained light-controllable inhibitors of T1 with Ki in the low nanomolar range, whose activity could be modulated over 20-fold by irradiation. The inhibitory potency as well as resistance to proteolytic degradation were systematically studied on a series of 17 SFTI-1 analogues. The hydrogen bond network that stabilizes the structure of inhibitors and possibly the enzyme-inhibitor binding dynamics were affected by isomerization of the photoswitch. The feasibility of manipulating enzyme activity in time and space was demonstrated by controlled digestion of gelatin-based hydrogel and an antimicrobial peptide BP100-RW. Finally, our design principles of diarylethene photoswitches are shown to apply also for the development of other serine protease inhibitors.

Bicyclic β-Sheet Mimetics that Target the Transcriptional Coactivator β-Catenin and Inhibit Wnt Signaling

Protein complexes are defined by the three-dimensional structure of participating binding partners. Knowledge about these structures can facilitate the design of peptidomimetics which have been applied for example, as inhibitors of protein-protein interactions (PPIs). Even though β-sheets participate widely in PPIs, they have only rarely served as the basis for peptidomimetic PPI inhibitors, in particular when addressing intracellular targets. Here, we present the structure-based design of β-sheet mimetics targeting the intracellular protein β-catenin, a central component of the Wnt signaling pathway. Based on a protein binding partner of β-catenin, a macrocyclic peptide was designed and its crystal structure in complex with β-catenin obtained. Using this structure, we designed a library of bicyclic β-sheet mimetics employing a late-stage diversification strategy. Several mimetics were identified that compete with transcription factor binding to β-catenin and inhibit Wnt signaling in cells. The presented design strategy can support the development of inhibitors for other β-sheet-mediated PPIs.

Design, synthesis, and anti-tumor activities of novel Brevinin-1BYa peptidomimetics

Brevinin-1BYa is an amphibian skin-derived peptide that exhibits promising anti-microbial activity against gram-positive and -negative bacteria. However, the anti-tumor activity of Brevinin-1BYa remains unclear, and, more importantly, its therapeutic application is limited owing to its poor protease and reduction stability. In this study, a series of novel Brevinin-1BYa derivatives, including O-linked N-acetyl-glucosamine glyclopeptides and disulfide bond mimetics, were designed and synthesized. Additionally, their anti-tumor activity against human prostate cancer cell line C4-2B, human NSCLC cell line A549 (adenocarcinoma), and human hepatoma cells line HuH-7 was investigated. Among these, the thioether bridge substituted peptidomimetic Brevinin-1BYa-3 displayed improved reduction stability, more stable secondary structure, greater protease stability, and increased anti-tumor activity compared with the original peptide, rendering it a promising leading compound for drug development, particularly for applications against malignant tumors.

Triazolization of Enolizable Ketones with Primary Amines: A General Strategy toward Multifunctional 1,2,3-Triazoles

The development of metal-free syntheses toward 1,2,3-triazoles has been a burgeoning research area throughout the past decade. Despite the numerous advances, the scarceness of methods for the preparation of 1,5-disubstituted 1,2,3-triazoles from readily available substrates remained a challenge that was addressed by our group in 2016. A metal-free three-component reaction, which we have dubbed the triazolization reaction, was established for the rapid synthesis of 1,5-disubstituted, fully functionalized and NH-1,2,3-triazoles. This novel approach stands out because it utilizes widely available starting materials, namely primary amines and enolizable ketones. Furthermore, the broad substrate scope is a major advantage, and was further expanded by the number of modified protocols that have been reported. Triazolization products have successfully found utility as intermediates in various synthetic transformations, and were the subject of a few interesting biological activity studies.

Sunflower Trypsin Inhibitor-1 (SFTI-1): Sowing Seeds in the Fields of Chemistry and Biology

Nature-derived cyclic peptides have proven to be a vast source of inspiration for advancing modern pharmaceutical design and synthetic chemistry. The focus of this Review is sunflower trypsin inhibitor-1 (SFTI-1), one of the smallest disulfide-bridged cyclic peptides found in nature. SFTI-1 has an unusual biosynthetic pathway that begins with a dual-purpose albumin precursor and ends with the production of a high-affinity serine protease inhibitor that rivals other inhibitors much larger in size. Investigations on the molecular basis for SFTI-1's rigid structure and adaptable function have planted seeds for thought that have now blossomed in several different fields. Here we survey these applications to highlight the growing potential of SFTI-1 as a versatile template for engineering inhibitors, a prototypic peptide for studying inhibitory mechanisms, a stable scaffold for grafting bioactive peptides, and a model peptide for evaluating peptidomimetic motifs and platform technologies.

Chemical Synthesis of Interleukin-2 and Disulfide Stabilizing Analogues

Chemical protein synthesis allows the construction of well-defined structural variations and facilitates the development of deeper understanding of protein structure-function relationships and new protein engineering strategies. Herein, we report the chemical synthesis of interleukin-2 (IL-2) variants on a multimilligram scale and the formation of non-natural disulfide mimetics that improve stability against reduction. The synthesis was accomplished by convergent KAHA ligations; the acidic conditions of KAHA ligation proved to be valuable for the solubilization of the hydrophobic segments of IL-2. The bioactivity of the synthetic IL-2 and its analogues were shown to be equipotent to recombinant IL-2 and exhibit improved stability against reducing agents.

Disulfide Bond Mimetics: Strategies and Challenges

The activity profile of many biologically relevant proteins and peptides often relies on a precise 3D structural organization. In this context, disulfide bonds are natural covalent constraints that play a key role in driving and stabilizing the folding pattern of these molecules. Despite its prominent significance as structural motif, the disulfide bond itself is inherently unstable under physiological conditions, posing a major limit to the use and development of disulfide-rich peptides and proteins as molecular tools and drug lead compounds. To tackle this restriction, disulfide engineering with stable functional analogues has arisen a considerable interest. Here, the most popular approaches to disulfide replacement are reviewed and discussed with particular emphasis on advantages and limitations under both functional and synthetic perspectives.

Total Chemical Synthesis of an Intra-A-Chain Cystathionine Human Insulin Analogue with Enhanced Thermal Stability

Despite recent advances in the treatment of diabetes mellitus, storage of insulin formulations at 4 °C is still necessary to minimize chemical degradation. This is problematic in tropical regions where reliable refrigeration is not ubiquitous. Some degradation byproducts are caused by disulfide shuffling of cystine that leads to covalently bonded oligomers. Consequently we examined the utility of the non-reducible cystine isostere, cystathionine, within the A-chain. Reported herein is an efficient method for forming this mimic using simple monomeric building blocks. The intra-A-chain cystathionine insulin analogue was obtained in good overall yield, chemically characterized and demonstrated to possess native binding affinity for the insulin receptor isoform B. It was also shown to possess significantly enhanced thermal stability indicating potential application to next-generation insulin analogues.

Constraining cyclic peptides to mimic protein structure motifs

Many proteins exert their biological activities through small exposed surface regions called epitopes that are folded peptides of well-defined three-dimensional structures. Short synthetic peptide sequences corresponding to these bioactive protein surfaces do not form thermodynamically stable protein-like structures in water. However, short peptides can be induced to fold into protein-like bioactive conformations (strands, helices, turns) by cyclization, in conjunction with the use of other molecular constraints, that helps to fine-tune three-dimensional structure. Such constrained cyclic peptides can have protein-like biological activities and potencies, enabling their uses as biological probes and leads to therapeutics, diagnostics and vaccines. This Review highlights examples of cyclic peptides that mimic three-dimensional structures of strand, turn or helical segments of peptides and proteins, and identifies some additional restraints incorporated into natural product cyclic peptides and synthetic macrocyclic peptidomimetics that refine peptide structure and confer biological properties.

Ruthenium-catalyzed cycloadditions of 1-haloalkynes with nitrile oxides and organic azides: synthesis of 4-haloisoxazoles and 5-halotriazoles

(Cyclopentadienyl)(cyclooctadiene) ruthenium(II) chloride [CpRuCl(cod)] catalyzes the reaction between nitrile oxides and electronically deficient 1-choro-, 1-bromo-, and 1-iodoalkynes leading to 4-haloisoxazoles. Organic azides are also suitable 1,3-dipoles, resulting in 5-halo-1,2,3-triazoles. These air-tolerant reactions can be performed at room temperature with 1.25 equivalents of the respective 1,3-dipole relative to the alkyne component. Reactive 1-haloalkynes include propiolic amides, esters, ketones, and phosphonates. Post-functionalization of the halogenated azole products can be accomplished by using palladium-catalyzed cross-coupling reactions and by manipulation of reactive amide groups. The lack of catalysis observed with [Cp*RuCl(cod)] (Cp* = pentamethylcyclopentadienyl) is attributed to steric demands of the Cp* (η(5)-C5Me5) ligand in comparison to the parent Cp (η(5)-C5H5). This hypothesis is supported by the poor reactivity of [(η(5)-C5Me4CF3)RuCl(cod)], which serves as a an isosteric mimic of Cp* and as an isoelectronic analogue of Cp.

Oxidative folding of peptides with cystine-knot architectures: kinetic studies and optimization of folding conditions

Bioactive peptides often contain several disulfide bonds that provide the main contribution to conformational rigidity and structural, thermal, or biological stability. Among them, cystine-knot peptides-commonly named "knottins"-make up a subclass with several thousand natural members. Hence, they are considered promising frameworks for peptide-based pharmaceuticals. Although cystine-knot peptides are available through chemical and recombinant synthetic routes, oxidative folding to afford the bioactive isomers still remains a crucial step. We therefore investigated the oxidative folding of ten protease-inhibiting peptides from two knottin families, as well as that of an HIV entry inhibitor and of aprotinin, under two conventional sets of folding conditions and by a newly developed procedure. Kinetic studies identified folding conditions that resulted in correctly folded miniproteins with high rates of conversion even for highly hydrophobic and aggregation-prone peptides in concentrated solutions.

Peptides and proteins as a continuing exciting source of inspiration for peptidomimetics

Despite their enormous diversity in biological function and structure, peptides and proteins are endowed with properties that have induced and stimulated the development of peptidomimetics. Clearly, peptides can be considered as the "stem" of a phylogenetic molecular development tree from which branches of oligomeric peptidomimetics such as peptoids, peptidosulfonamides, urea peptidomimetics, as well as β-peptides have sprouted. It is still a challenge to efficiently synthesize these oligomeric species, and study their structural and biological properties. Combining peptides and peptidomimetics led to the emergence of peptide-peptidomimetic hybrids in which one or more (proteinogenic) amino acid residues have been replaced with these mimetic residues. In scan-like approaches, the influence of these replacements on biological activity can then be studied, to evaluate to what extent a peptide can be transformed into a peptidomimetic structure while maintaining, or even improving, its biological properties. A central issue, especially with the smaller peptides, is the lack of secondary structure. Important approaches to control secondary structure include the introduction of α,α-disubstituted amino acids, or (di)peptidomimetic structures such as the Freidinger lactam. Apart from intra-amino acid constraints, inter-amino acid constraints for formation of a diversity of cyclic peptides have shaped a thick branch. Apart from the classical disulfide bridges, the repertoire has been extended to include sulfide and triazole bridges as well as the single-, double- and even triple-bond replacements, accessible by the extremely versatile ring-closing alkene/alkyne metathesis approaches. The latter approach is now the method of choice for the secondary structure that presents the greatest challenge for structural stabilization: the α-helix.