A Bifunctional Electrocatalyst for Oxygen Evolution and Oxygen Reduction Reactions in Water

Harnessing the cobalt complex for bidirectional O2/H2O transformation in neutral water via electrocatalysis/photocatalysis

Bidirectional oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) catalysts are crucial for renewable energy transduction via electrolyzers and fuel cell. Here, we present a protocol for harnessing the cobalt complex for bidirectional O2/H2O transformation in neutral water via electrocatalysis/photocatalysis. We describe steps for monitoring ORR and OER in neutral aqueous solution, measuring O2 concentration, and identifying the probable catalytic mechanism for ORR and OER. We then detail procedures for examining catalyst behavior under photocatalytic conditions in neutral aqueous surroundings. For complete details on the use and execution of this protocol, please refer to Saini et al.1.

A homogeneous cobalt complex mediated electro and photocatalytic O2/H2O interconversion in neutral water

The O2/H2O redox couple is vital in various renewable energy conversion strategies. This work delves into the Co(L-histidine)2 complex, a functional mimic of oxygen-carrying metalloproteins, and its electrochemical behavior driving the bidirectional oxygen reduction (ORR) and oxygen evolution (OER) activity in neutral water. This complex electrocatalyzes O2 via two distinct pathways: a two-electron O2/H2O2 reduction (catalytic rate = 250 s-1) and a four-electron O2 to H2O production (catalytic rate = 66 s-1). The formation of the key trans-μ-1,2-Co(III)-peroxo intermediate expedites this process. Additionally, this complex effectively oxidizes water to O2 (catalytic rate = 15606 s-1) at anodic potentials via a Co(IV)-oxo species. Additionally, this complex executes the ORR and OER under photocatalytic conditions in neutral water in the presence of appropriate photosensitizer (Eosin-Y) and redox mediators (triethanolamine/ORR and Na2S2O8/OER) at an appreciable rate. These results highlight one of the early examples of both electro- and photoactive bidirectional ORR/OER catalysts operational in neutral water.

Molecular Metallocorrole-Nanorod Photocatalytic System for Sustainable Hydrogen Production

Solar-driven photocatalytic generation of hydrogen from water is a potential source of clean and renewable fuel. Yet systems that are sufficiently stable and efficient for practical use have not been realized. Here, nanorod photocatalysts that have proven record activity for the water reduction half reaction were successfully combined with molecular metallocorroles suitable for catalyzing the accompanying oxidation reactions. Utilization of OH^- /⋅OH redox species as charge transfer shuttle between freely mixed metallocorroles and rods resulted in quantum efficiency that peaked as high as 17 % for hydrogen production from water in the absence of sacrificial hole scavengers. While typically each sacrificial scavenger is able to extract but a single hole, here the molecular metallocorrole catalysts were found to successfully handle nearly 300,000 holes during their lifespan. The implications of the new system on the prospects of realizing practical overall water splitting and direct solar-to-fuel energy conversion were discussed.

Molecular Metallocorrole-Nanorod Photocatalytic System for Sustainable Hydrogen Production

Solar-driven photocatalytic generation of hydrogen from water is a potential source of clean and renewable fuel. Yet systems that are sufficiently stable and efficient for practical use have not been realized. Here, nanorod photocatalysts that have proven record activity for the water reduction half reaction were successfully combined with molecular metallocorroles suitable for catalyzing the accompanying oxidation reactions. Utilization of OH^- /⋅OH redox species as charge transfer shuttle between freely mixed metallocorroles and rods resulted in quantum efficiency that peaked as high as 17 % for hydrogen production from water in the absence of sacrificial hole scavengers. While typically each sacrificial scavenger is able to extract but a single hole, here the molecular metallocorrole catalysts were found to successfully handle nearly 300,000 holes during their lifespan. The implications of the new system on the prospects of realizing practical overall water splitting and direct solar-to-fuel energy conversion were discussed.

Metal-Corrole-Based Porous Organic Polymers for Electrocatalytic Oxygen Reduction and Evolution Reactions

Integrating molecular catalysts into designed frameworks often enables improved catalysis. Compared with porphyrin-based frameworks, metal-corrole-based frameworks have been rarely developed, although monomeric metal corroles are usually more efficient than porphyrin counterparts for the electrocatalytic oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). We herein report on metal-corrole-based porous organic polymers (POPs) as ORR and OER electrocatalysts. M-POPs (M=Mn, Fe, Co, Cu) were synthesized by coupling metal 10-phenyl-5,15-(4-iodophenyl)corrole with tetrakis(4-ethynylphenyl)methane. Compared with metal corrole monomers, M-POPs displayed significantly enhanced catalytic activity and stability. Co-POP outperformed other M-POPs by achieving four-electron ORR with a half-wave potential of 0.87 V vs. RHE and reaching 10 mA cm^-2 OER current density at 340 mV overpotential. This work is unparalleled to develop and explore metal-corrole-based POPs as electrocatalysts.

Homogeneous Water Oxidation Catalyzed by First-Row Transition Metal Complexes: Unveiling the Relationship between Turnover Frequency and Reaction Overpotential

The utilization of earth-abundant low-toxicity metal ions in the construction of highly active and efficient molecular catalysts promoting the water oxidation reaction is important for developing a sustainable artificial energy cycle. However, the kinetic and thermodynamic properties of the currently available molecular water oxidation catalysts (MWOCs) have not been comprehensively investigated. This Review summarizes the current status of MWOCs based on first-row transition metals in terms of their turnover frequency (TOF, a kinetic property) and overpotential (η, a thermodynamic property) and uses the relationship between log(TOF) and η to assess catalytic performance. Furthermore, the effects of the same ligand classes on these MWOCs are discussed in terms of TOF and η, and vice versa. The collective analysis of these relationships provides a metric for the direct comparison of catalyst systems and identifying factors crucial for catalyst design.

Development of Peripheral Functionalization Chemistry of meso-Free Corroles

In contrast to the extensive development of meso functionalization of porphyrins, that of corroles has been only rarely explored until the development of practical synthetic methods of meso -free corroles in 2015. Ready availability of meso -free corroles opened up meso -functionalization chemistry of corroles, giving rise to successful synthesis of various meso-substituted corroles such as meso -halogen, meso -nitro, meso -amino, meso -oxo, and meso iminocorroles as well as meso-meso linked corrole dimers and corrole tapes. In some cases, 2NH corroles existed as stable or transient radical species. The impacts of meso -functionalization on the structures, electronic properties, optical characteristics, and aromaticity are highlighted in this Minireview.

Selective and Additive-Free Hydrogenation of Nitroarenes Mediated by a DMSO-Tagged Molecular Cobalt Corrole Catalyst

We report on the first cobalt corrole that effectively mediates the homogeneous hydrogenation of structurally diverse nitroarenes to afford the corresponding amines. The given catalyst is easily assembled prior to use from 4-tert-butylbenzaldehyde and pyrrole followed by metalation of the resulting corrole macrocycle with cobalt(II) acetate. The thus-prepared complex is self-contained in that the hydrogenation protocol is free from the requirement for adding any auxiliary reagent to elicit the catalytic activity of the applied metal complex. Moreover, a containment system is not required for the assembly of the hydrogenation reaction set-up as both the autoclave and the reaction vessels are readily charged under a regular laboratory atmosphere.

Surface Interrogation of Electrodeposited MnOx and CaMnO3 Perovskites by Scanning Electrochemical Microscopy: Probing Active Sites and Kinetics for the Oxygen Evolution Reaction

Surface interrogation scanning electrochemical microscopy (SI-SECM) of two electrodeposited manganese-based electrocatalysts, amorphous MnO_x and perovskite CaMnO₃ , was used to investigate the manganese oxidation state relating to the oxygen evolution reaction (OER) under neutral conditions. The results indicate the amounts of Mn^III and Mn^IV species in MnO_x and CaMnO₃ depend on potential. A Mn^V species was identified in both structures during the OER. Time-delay titration of Mn^V further revealed that MnO_x produced two types of active sites with different OER reaction rates: k'_fast (MnO_x )=1.21 s^-1 and k'_slow (MnO_x )=0.24 s^-1 . In contrast, CaMnO₃ perovskites in which the Mn^V species formed at a less positive potential than that in MnO_x , displayed only one kinetic behavior with a faster reaction rate of 1.72 s^-1 .

Mono-/Multinuclear Water Oxidation Catalysts

Water splitting, in which water molecules can be transformed into hydrogen and oxygen, is an appealing energy conversion and transformation strategy to address the environmental and energy crisis. The oxygen evolution reaction (OER) is dynamically slow, which limits energy conversion efficiency during the water-splitting process and requires high-efficiency water oxidation catalysts (WOCs) to overcome the OER energy barrier. It is generally accepted that multinuclear WOCs possess superior OER performances, as demonstrated by the CaMn₄ O₅ cluster in photosystem II (PSII), which can catalyze the OER efficiently with a very low overpotential. Inspired by the CaMn₄ O₅ cluster in PSII, some multinuclear WOCs were synthesized that could catalyze water oxidation. In addition, some mononuclear molecular WOCs also show high water oxidation activity. However, it cannot be excluded that the high activity arises from the formation of dimeric species. Recently, some mononuclear heterogeneous WOCs showed a high water oxidation activity, which testified that mononuclear active sites with suitable coordination surroundings could also catalyze water oxidation efficiently. This Review focuses on recent progress in the development of mono-/multinuclear homo- and heterogeneous catalysts for water oxidation. The active sites and possible catalytic mechanisms for water oxidation on the mono-/multinuclear WOCs are provided.

Convenient Immobilization of Cobalt Corroles on Carbon Nanotubes through Covalent Bonds for Electrocatalytic Hydrogen and Oxygen Evolution Reactions

Two different methods were used to immobilize Co corroles on carbon nanotubes (CNTs) through covalent bonds. The resulting CNTs engineered with Co corroles were used as electrocatalysts for the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) in aqueous solutions of pH 0, 7, and 14. For both HER and OER in all solutions, the hybrids obtained by attaching Co corroles on CNTs through amidation coupling showed better performance. This is likely because the large surface area and good electrical conductivity of CNTs can be well preserved during the amidation reaction under mild conditions.

Carbon Nanotubes with Cobalt Corroles for Hydrogen and Oxygen Evolution in pH 0-14 Solutions

Water splitting is promising to realize a hydrogen-based society. The practical use of molecular water-splitting catalysts relies on their integration onto electrode materials. We describe herein the immobilization of cobalt corroles on carbon nanotubes (CNTs) by four strategies and compare the performance of the resulting hybrids for H₂ and O₂ evolution. Co corroles can be covalently attached to CNTs with short conjugated linkers (the hybrid is denoted as H1) or with long alkane chains (H2), or can be grafted to CNTs via strong π-π interactions (H3) or via simple adsorption (H4). An activity trend H1≫H3>H2≈H4 is obtained for H₂ and O₂ evolution, showing the critical role of electron transfer ability on electrocatalysis. Notably, H1 is the first Janus catalyst for both H₂ and O₂ evolution reactions in pH 0-14 aqueous solutions. Therefore, this work is significant to show potential uses of electrode materials with well-designed molecular catalysts in electrocatalysis.

Identifying On-Surface Site-Selective Chemical Conversions by Theory-Aided NEXAFS Spectroscopy: The Case of Free-Base Corroles on Ag(111)

We demonstrate here that theory-assisted near-edge X-ray absorption fine-structure (NEXAFS) spectroscopy enables the site-sensitive monitoring of on-surface chemical reactions, thus, providing information not accessible by other techniques. As a prototype example, we have used free-base 5,10,15-tris(pentafluorophenyl)corroles (3H-TpFPC) adsorbed on Ag(111) and present a detailed investigation of the angle-dependent NEXAFS of this molecular species as well as of their thermally induced derivatives. For this, we have recorded experimental C and N K-edge NEXAFS spectra and interpret them based on XAS cross-section calculations by using a continuous fraction approach and core-hole including multiprojector PAW pseudopotentials within DFT. We have characterized the as-deposited low temperature (200 K) phase and unraveled the subsequent changes induced by dehydrogenation (at 330 K) and ring-closure reactions (at 430 K). By exemplarily obtaining profound insight into the on-surface chemistry of free-base corrolic species adsorbed on a noble metal this work highlights how angle-dependent XAS combined with accurate theoretical modeling can serve for the investigation of on-surface reactions, whereby even highly similar molecular structures, such as tautomers and isomers, can be distinguished.

CO2 Fixation with Epoxides under Mild Conditions with a Cooperative Metal Corrole/Quaternary Ammonium Salt Catalyst System

The cooperative catalytic activity of several metal corrole complexes in combination with tetrabutyl‐ammonium bromide (TBAB) has been investigated for the reaction of epoxides with CO₂ leading to cyclic carbonates. It was found that the use of just 0.05 mol % of a manganese(III)corrole with 2 mol % TBAB exhibits excellent catalytic activity under an atmosphere of CO₂.

A Bifunctional Electrocatalyst for Oxygen Evolution and Oxygen Reduction Reactions in Water

Oxygen reduction and water oxidation are two key processes in fuel cell applications. The oxidation of water to dioxygen is a 4 H⁺/4 e^- process, while oxygen can be fully reduced to water by a 4 e^-/4 H⁺ process or partially reduced by fewer electrons to reactive oxygen species such as H₂O₂ and O₂^-. We demonstrate that a novel manganese corrole complex behaves as a bifunctional catalyst for both the electrocatalytic generation of dioxygen as well as the reduction of dioxygen in aqueous media. Furthermore, our combined kinetic, spectroscopic, and electrochemical study of manganese corroles adsorbed on different electrode materials (down to a submolecular level) reveals mechanistic details of the oxygen evolution and reduction processes.