In-situ-Methoden zur Charakterisierung elektrochemischer NiFe-Sauerstoffentwicklungskatalysatoren

High performance transition metal-based electrocatalysts for green hydrogen production

Hydrogen energy is a promising energy source that is environmentally friendly due to its long-term, large-capacity storage and low greenhouse gas emissions. However, the mass production of hydrogen is still technically difficult due to limitations in efficiency, stability, and cost, even though it can satisfy all of the current energy demands. Water splitting using an electrocatalyst is an efficient method for environmentally friendly hydrogen production, and various catalyst-related studies are being conducted for this purpose. For the last decade, transition metal-based compositions have been at the center of water splitting catalyst research. Despite numerous studies and developments, studies on transition metal-based catalysts so far still have various problems to be solved. Although excellent review papers on transition metal-based catalysts have been reported, the overall scope of transition metal-based catalysts has rarely been covered in the reports. In this review, we present the research about overall transition metal-based electrocatalysts for hydrogen production from four different categories, namely, alloys, transition-metal dichalcogenides (TMDs), layered double hydroxides (LDHs), and single-atom catalysts (SACs). The fundamental roles of metal alloying and unique electrical properties of TMDs, LDHs, and SACs are mainly discussed. Furthermore, we present the recent advances in photovoltaic-electrochemical (PV-EC) systems for sustainable hydrogen production. Finally, perspectives on the issues to be addressed in the research on transition metal-based electrocatalysts are provided.

Boosting Electrocatalytic Oxygen Evolution over Ce-Co9 S8 Core-Shell Nanoneedle Arrays by Electronic and Architectural Dual Engineering

An dual electronic and architectural engineering strategy is a good way to rationally design earth-abundant and highly efficient electrocatalysts of the oxygen evolution reaction (OER) for sustainable hydrogen-based energy devices. Here, a Ce-doped Co₉ S₈ core-shell nanoneedle array (Ce-Co₉ S₈ @CC) supported on a carbon cloth has been designed and developed to accelerate the sluggish kinetics of the OER. Profiting from valance alternative Ce doping, a fine core-shell structure and vertically aligned nanoneedle arrayed architecture, Ce-Co₉ S₈ @CC integrates modulated electronic structure, highly exposed active sites, and multidimensional mass diffusion channels; together, these afford a favorable catalyzed OER. Ce-Co₉ S₈ @CC exhibits remarkable performance in the OER in an alkaline medium, where the overpotential requires only 242 mV to deliver a current density of 10 mA cm^-2 for the OER; this is 70 mV superior to that of Ce-free Co₉ S₈ catalyst and other counterparts. Good stability and impressive selectivity (nearly 100 % Faradic efficiency) are also demonstrated. When integrated into a two-electrode OER//HER electrolyzer, the as-prepared Ce-Co₉ S₈ @CC displays a low operation potential of 1.54 V at 10 mA cm^-2 and long-term stability, thus demonstrating great potential for economical water electrolysis.

Random Occupation of Multimetal Sites in Transition Metal-Organic Frameworks for Boosting the Oxygen Evolution Reaction

Developing robust oxygen evolution reaction (OER) electrocatalysts with excellent performance is essential for the conversion of renewable electricity to clean fuel. Herein, we present a facile concept for the synthesis of efficient high-entropy metal-organic frameworks (HEMOFs) as electrocatalysts in a one-step solvothermal synthesis. This strategy allows control of the microstructure and corresponding lattice distortion by tuning the metal ion composition. As a result, the OER activity was improved by optimizing the coordination environment of the metal catalytic center. The optimized Co-rich HEMOFs exhibited a low overpotential of 310 mV at a current density of 10 mA cm^-2 , better than a RuO₂ catalyst tested under the same conditions. The finding of lattice distortion of the HEMOFs provides a new strategy for developing high-performance electrocatalysts for energy conversion.

Evolution of Cationic Vacancy Defects: A Motif for Surface Restructuration of OER Precatalyst

Defects have been found to enhance the electrocatalytic performance of NiFe-LDH for oxygen evolution reaction (OER). Nevertheless, their specific configuration and the role played in regulating the surface reconstruction of electrocatalysts remain ambiguous. Herein, cationic vacancy defects are generated via aprotic-solvent-solvation-induced leaking of metal cations from NiFe-LDH nanosheets. DFT calculation and in situ Raman spectroscopic observation both reveal that the as-generated cationic vacancy defects tend to exist as V_M (M=Ni/Fe); under increasing applied voltage, they tend to assume the configuration V_MOH , and eventually transform into V_MOH-H which is the most active yet most difficult to form thermodynamically. Meanwhile, with increasing voltage the surface crystalline Ni(OH)_x in the NiFe-LDH is gradually converted into disordered status; under sufficiently high voltage when oxygen bubbles start to evolve, local NiOOH species become appearing, which is the residual product from the formation of vacancy V_MOH-H . Thus, we demonstrate that the cationic defects evolve along with increasing applied voltage (V_M → V_MOH → V_MOH-H ), and reveal the essential motif for the surface restructuration process of NiFe-LDH (crystalline Ni(OH)_x → disordered Ni(OH)_x → NiOOH). Our work provides insight into defect-induced surface restructuration behaviors of NiFe-LDH as a typical precatalyst for efficient OER electrocatalysis.

Molecular Functionalization of NiO Nanocatalyst for Enhanced Water Oxidation by Electronic Structure Engineering

Tuning the local environment of nanomaterial-based catalysts has emerged as an effective approach to optimize their oxygen evolution reaction (OER) performance, yet the controlled electronic modulation around surface active sites remains a great challenge. Herein, directed electronic modulation of NiO nanoparticles was achieved by simple surface molecular modification with small organic molecules. By adjusting the electronic properties of modifying molecules, the local electronic structure was rationally tailored and a close electronic structure-activity relationship was discovered: the increasing electron-withdrawing modification readily decreased the electron density around surface Ni sites, accelerating the reaction kinetics and improving OER activity, and vice versa. Detailed investigation by operando Raman spectroelectrochemistry revealed that the electron-withdrawing modification facilitates the charge-transfer kinetics, stimulates the catalyst reconstruction, and promotes abundant high-valent γ-NiOOH reactive species generation. The NiO-C6 F5 catalyst, with the optimized electronic environment, exhibited superior performance towards water oxidation. This work provides a well-designed and effective approach for heterogeneous catalyst fabrication under the molecular level.

Spontaneous Synthesis of Silver-Nanoparticle-Decorated Transition-Metal Hydroxides for Enhanced Oxygen Evolution Reaction

The fabrication of metal-supported hybrid structures with enhanced properties typically requires external energy input, such as pyrolysis, photolysis, and electrodeposition. In this study, silver-nanoparticle-decorated transition-metal hydroxide (TMH) composites were synthesized by an approach based on a spontaneous redox reaction (SRR) at room temperature. The SRR between silver ions and TMH provides a simple and facile route to establish effective and stable heterostructures that can enhance the oxygen evolution reaction (OER) activity. Ag@Co(OH)_x grown on carbon cloth exhibits outstanding OER activity and durability, even superior to IrO₂ and many previously reported OER electrocatalysts. Experimental and theoretical analysis demonstrates that the strong electronic interaction between Ag and Co(OH)₂ activates the silver clusters as catalytically OER active sites, effectively optimizing the binding energies with reacted intermediates and facilitating the OER kinetics.

Verchenko V, Shevelkov AV, Driess M. Boosting Water Oxidation through In Situ Electroconversion of Manganese Gallide: An Intermetallic Precursor Approach

For the first time, the manganese gallide (MnGa4 ) served as an intermetallic precursor, which upon in situ electroconversion in alkaline media produced high-performance and long-term-stable MnOx -based electrocatalysts for water oxidation. Unexpectedly, its electrocorrosion (with the concomitant loss of Ga) leads simultaneously to three crystalline types of MnOx minerals with distinct structures and induced defects: birnessite δ-MnO2 , feitknechtite β-MnOOH, and hausmannite α-Mn3 O4 . The abundance and intrinsic stabilization of MnIII /MnIV active sites in the three MnOx phases explains the superior efficiency and durability of the system for electrocatalytic water oxidation. After electrophoretic deposition of the MnGa4 precursor on conductive nickel foam (NF), a low overpotential of 291 mV, comparable to that of precious-metal-based catalysts, could be achieved at a current density of 10 mA cm-2 with a durability of more than five days.