Small-Angle Neutron Scattering for In Situ Probing of Ion Adsorption Inside Micropores

Permanent Nanobubbles in Water: Liquefied Hollow Carbon Spheres Break the Limiting Diffusion Current of Oxygen Reduction Reaction

Porous liquids have traditionally been designed with sterically hindered solvents. Alternatively, recent efforts rely on dispersing microporous frameworks in simpler solvents like water. Here we report a unique strategy to construct macroporous water by selectively incorporating hydrophilicity on the surfaces of hydrophobic hollow carbon spheres (HCS). Specifically, we show that the stable dispersion surface ionized HCS in water while retaining the inherent porosity. The electrocatalytic conversion of small gas molecules in aqueous electrolytes is limited by the concentration and diffusion rates of gas molecules in water. In this case, macroporous water exhibited 6 times gas uptake compared to nonporous (pure) water. By leveraging the high gas capacity and enhanced diffusion kinetics, the limiting diffusion current of oxygen reduction reaction (ORR) in macroporous water is 2 times that in nonporous water, offering promising prospects for sustainable energy conversion technologies.

Understanding the Wettability of C1N1 (Sub)Nanopores: Implications for Porous Carbonaceous Electrodes

Understanding how water interacts with nanopores of carbonaceous electrodes is crucial for energy storage and conversion applications. A high surface area of carbonaceous materials does not necessarily need to translate to a high electrolyte-solid interface area. Herein, we study the interaction of water with nanoporous C1N1 materials to explain their very low specific capacitance in aqueous electrolytes despite their high surface area. Water was used to probe chemical environments, provided by pores of different sizes, in 1H MAS NMR experiments. We observe that regardless of their high hydrophilicity, only a negligible portion of water can enter the nanopores of C1N1, in contrast to a reference pure carbon material with a similar pore structure. The common paradigm that water easily enters hydrophilic pores does not apply to C1N1 nanopores below a few nanometers. Calorimetric and sorption experiments demonstrated strong water adsorption on the C1N1 surface, which restricts water mobility across the interface and impedes its penetration into the nanopores.

Are SAXS and SANS suitable to extract information on the role of water for electric-double-layer formation at the carbon-aqueous-electrolyte interface?

This study reports on the applicability of X-ray transmission (XRT), small- and wide-angle X-ray scattering (SAXS/WAXS) and small-angle neutron scattering (SANS) for investigating fundamental processes taking place in the working electrode of an electric double-layer capacitor with 1 M RbBr aqueous electrolyte at different applied potentials. XRT and incoherent neutron scattering are employed to determine global ion- and water-concentration changes and associated charge-balancing mechanisms. We showcase the suitability of SAXS and SANS, respectively, to get complementary information on local ion and solvent rearrangement in nanoconfinement, but also underscore the limitations of simple qualitative models, asking for more quantitative descriptions of water-water and ion-water interactions via detailed atomistic modelling approaches.

Neutron Scattering Studies of Heterogeneous Catalysis

Understanding the structural dynamics/evolution of catalysts and the related surface chemistry is essential for establishing structure-catalysis relationships, where spectroscopic and scattering tools play a crucial role. Among many such tools, neutron scattering, though less-known, has a unique power for investigating catalytic phenomena. Since neutrons interact with the nuclei of matter, the neutron-nucleon interaction provides unique information on light elements (mainly hydrogen), neighboring elements, and isotopes, which are complementary to X-ray and photon-based techniques. Neutron vibrational spectroscopy has been the most utilized neutron scattering approach for heterogeneous catalysis research by providing chemical information on surface/bulk species (mostly H-containing) and reaction chemistry. Neutron diffraction and quasielastic neutron scattering can also supply important information on catalyst structures and dynamics of surface species. Other neutron approaches, such as small angle neutron scattering and neutron imaging, have been much less used but still give distinctive catalytic information. This review provides a comprehensive overview of recent advances in neutron scattering investigations of heterogeneous catalysis, focusing on surface adsorbates, reaction mechanisms, and catalyst structural changes revealed by neutron spectroscopy, diffraction, quasielastic neutron scattering, and other neutron techniques. Perspectives are also provided on the challenges and future opportunities in neutron scattering studies of heterogeneous catalysis.

Three-electrode cell calorimeter for electrical double layer capacitors

A calorimeter was built to measure the heat from a porous capacitive working electrode connected in a three-electrode configuration. This makes it possible to detect differences between cathodic and anodic heat production. The electrochemical cell contains a large electrolyte solution reservoir, ensuring a constant concentration of the salt solution probed by the reference electrode via a Luggin tube. A heat flux sensor is used to detect the heat, and its calibration as a gauge of the total amount of heat produced by the electrode is done based on the net electrical work performed on the working electrode during a full charging-discharging cycle. In principle, from the measured heat and the electrical work, the change in the internal energy of the working electrode can be determined as a function of the applied potential. Such measurements inform about the potential energy and average electric potential of ions inside the pores, giving insight into the electrical double layer inside electrode micropores. Example measurements of the heat are shown for porous carbon electrodes in an aqueous salt solution.

De novo synthesis of a MIL-125(Ti) carrier for thermal- and pH-responsive drug release

Microporous round cake-like (diameter: 900 ± 100 nm) MIL-125(Ti) carrier with a central metal (Ti) exhibiting bio-affinity and possessing a great potential to be used as drug release platform, has been synthesized in the present study. The thermal and pH responsiveness of drug delivery systems (DDS) are the most important parameters for drug release and can be provided through polymer coating techniques. The Pluronic F127 (F127) and chitosan (CH) monomers were inserted into the crystal lattice of MIL-125(Ti) carrier during the de novo synthesis process, which were subsequently loaded with doxorubicin (DOX). The results reveal particle size changes (ranged between 30 and 50 %) from the original size of the MIL-125(Ti) carrier in response to temperature and pH when the carrier reaches acid environment. The drug release profiles have been completed through self-design device, which provides for the real-time release in the DOX amounts via UV-Vis spectra. The kinetics analysis was used to evaluate the R² values of first order, Higuchi, Korsmeyer-peppas, and Weibull fitting equations, where the Weibull fitting indicated the best R². An increase by 59.3 % of DOX released under the acid status (pH = 5.4) was observed, indicating that the CH-MIL-125(Ti) carrier is temperature and pH responsive. Moreover, the lattice explosion resulting from the temperature increase in the range of 25-42 °C caused an increase in F127-MIL-125(Ti) by 30.8-38.3 %. The simulated SAXS/WAXS studies for the microstructures of MIL-125(Ti) based DDS at different temperatures after polymer coating (F127-MIL-125(Ti)) provide the possible mechanism of lattice explosion. As such, the responsive Ti-MOF has a highly potential for use in the applications of cancer treatment.

Nanoconfined Space: Revisiting the Charge Storage Mechanism of Electric Double Layer Capacitors

The electric double layer capacitor (EDLC) has been recognized as one of the most appealing electrochemical energy storage devices. Nanoporous materials with relatively high specific surface areas are generally used as the electrode materials for electric double layer capacitors (EDLCs). The past decades have witnessed anomalous phenomena of EDLCs under nanoconfined space, which to a large degree doubt the conventional recognition. However, there are currently still no deep insights and consensus on the mechanism of these striking discoveries. In this Perspective, we start with a brief introduction to contextualize the significance of EDLCs, especially with electrode materials of nanoconfined space. Next, we briefly review the landmark studies in light of the charge storage mechanism of EDLCs, mainly focusing on the study of nanoporous materials for EDLCs. Subsequently, we reexamine the basic concepts under nanoconfined space and some representative in situ characterization techniques applied to understand the charge storage mechanism of EDLCs. Finally, we provide general conclusions and insights into the future research directions in the field of EDLCs.

Microscopic Simulations of Electrochemical Double-Layer Capacitors

Electrochemical double-layer capacitors (EDLCs) are devices allowing the storage or production of electricity. They function through the adsorption of ions from an electrolyte on high-surface-area electrodes and are characterized by short charging/discharging times and long cycle-life compared to batteries. Microscopic simulations are now widely used to characterize the structural, dynamical, and adsorption properties of these devices, complementing electrochemical experiments and in situ spectroscopic analyses. In this review, we discuss the main families of simulation methods that have been developed and their application to the main family of EDLCs, which include nanoporous carbon electrodes. We focus on the adsorption of organic ions for electricity storage applications as well as aqueous systems in the context of blue energy harvesting and desalination. We finally provide perspectives for further improvement of the predictive power of simulations, in particular for future devices with complex electrode compositions.

A review of recent developments for the in situ/operando characterization of nanoporous materials

This is a review on up-to-date in situ/operando methods for a comprehensive characterization of nanoporous materials. The group of nanoporous materials is constantly growing, and with it, the variety of...

Neutron Imaging of Paramagnetic Ions: Electrosorption by Carbon Aerogels and Macroscopic Magnetic Forces

The electrosorption of Gd³⁺ ions from an aqueous 70 mM Gd(NO₃)₃ solution in monolithic carbon aerogel electrodes was recorded by dynamic neutron imaging. The aerogels have a bimodal pore size distribution consisting of macropores and mesopores centered at 115 and 15 nm, respectively. After the uptake of Gd³⁺ ions by the negatively charged surface of the porous structure, an inhomogeneous magnetic field was applied to the system of discharging electrodes. This led to a convective flow and confinement of Gd(NO₃)₃ solution in the magnetic field gradient. Thus, a way to desalt and capture paramagnetic ions from an initially homogeneous solution is established.

Emerging trends in anion storage materials for the capacitive and hybrid energy storage and beyond

Electrochemical capacitors charge and discharge more rapidly than batteries over longer cycles, but their practical applications remain limited due to their significantly lower energy densities. Pseudocapacitors and hybrid capacitors have been developed to extend Ragone plots to higher energy density values, but they are also limited by the insufficient breadth of options for electrode materials, which require materials that store alkali metal cations such as Li⁺ and Na⁺. Herein, we report a comprehensive and systematic review of emerging anion storage materials for performance- and functionality-oriented applications in electrochemical and battery-capacitor hybrid devices. The operating principles and types of dual-ion and whole-anion storage in electrochemical and hybrid capacitors are addressed along with the classification, thermodynamic and kinetic aspects, and associated interfaces of anion storage materials in various aqueous and non-aqueous electrolytes. The charge storage mechanism, structure-property correlation, and electrochemical features of anion storage materials are comprehensively discussed. The recent progress in emerging anion storage materials is also discussed, focusing on high-performance applications, such as dual-ion- and whole-anion-storing electrochemical capacitors in a symmetric or hybrid manner, and functional applications including micro- and flexible capacitors, desalination, and salinity cells. Finally, we present our perspective on the current impediments and future directions in this field.

Observation of Ion Electrosorption in Metal-Organic Framework Micropores with In Operando Small-Angle Neutron Scattering

A molecular-level understanding of transport and adsorption mechanisms of electrolyte ions in nanoporous electrodes under applied potentials is essential to control the performance of double-layer capacitors. Here, in operando small-angle neutron scattering (SANS) is used to directly detect ion movements into the nanopores of a conductive metal-organic framework (MOF) electrode under operating conditions. Neutron-scattering data reveals that most of the void space within the MOF is accessible to the solvent. Upon the addition of the electrolyte sodium triflate (NaOTf), the ions are adsorbed on the outer surface of the protrusions to form a 30 Å layer instead of entering the ionophobic pores in the absence of an applied charging potential. The changes in scattering intensity when potentials are applied suggests the ion rearrangement in the micropores following different mechanisms depending on the electrode polarization. These observations shed insights on ion electrosorption in electrode materials.

Nanoporous carbon for electrochemical capacitive energy storage

This review summarizes the recent advances of nanoporous carbon materials in the application of EDLCs, including a better understanding of the charge storage mechanisms by combining the advanced techniques and simulations methods.

Molecular Insights into the Regulatable Interfacial Property and Flow Behavior of Confined Ionic Liquids in Graphene Nanochannels

The understanding of confined structure and flow property of ionic liquid (IL) in a nanochannel are essential for the efficient application of ILs in the green chemical processes. In this work, the ionic structure and various flow behaviors of ILs inside graphene nanochannels via molecular dynamics simulations are shown. The effect of the nanochannel structure on confined flow is explored, showing that the width mainly heightens the viscosity while the oxidation degree primarily enhances the interfacial friction coefficient. Tuning the width and oxidation degree of nanochannel, three different flow behaviors including Poiseuille, partial plunger and full plunger flow can be achieved, where the second one does not occur in water or other organic solvents. To describe the special flow behavior, an effective influence extent of the nanochannel (w _EIE ) is defined, whose value can distinguish the above flows effectively. Based on w _EIE , the phase diagrams of flow behavior for the nanochannel structure and pressure gradient are obtained, showing that the critical pressure gradient decreases with width and increases with the oxidation degree. Based on the quantitative relations between confined structures, viscosity, friction coefficient, flow behavior, and nanochannel structure, the intrinsic mechanism of regulating the flow behavior and rational design of nanochannel are finally discussed.

Height-driven structure and thermodynamic properties of confined ionic liquids inside carbon nanochannels from molecular dynamics study

Understanding the structural transition of ionic liquids (ILs) confined in a nanospace is imperative for the application of ILs in energy storage, gas separation, and other chemical engineering techniques. In this work, the quantitative relations between the properties and height of the nanochannel (H) for the ([Emim]⁺[TF₂N]^-) IL are explored through molecular dynamics simulations. Interestingly, the entropy of the confined IL exhibits a nonmonotonic behavior as H increases: initially increasing for H < 1.0 nm and then decreasing for 1.0 < H < 1.1 nm, followed by increasing again for H > 1.1 nm; it finally approaches that of liquid bulk ILs. The vibrational spectrum of the confined IL is analyzed to investigate the nature of nonmonotonic entropy, showing that the liquidity and partial solidity will be respectively attenuated and enhanced as H decreases from 5.0 to 0.75 nm. Moreover, the hydrogen bond (HB) network and external force are also calculated, showing similar nonmonotonic behaviors when compared with the thermodynamic properties. The entropy gain of the confined IL originates from the reduced HB interactions, weaker external force, and partial solid nature, where more phase space sampling for ILs inside a bilayer graphene nanochannel (BLGC) can be achieved. All the above relations demonstrate that there exists a critical height of the nanochannel (H_CR = 1.0 nm) at which the confined IL possesses weaker HB interaction, higher entropy, and better stability. The critical height of the nanochannel is also identified in the analysis of the local structures of cation head groups and anions, indicating that the confined IL could have a faster in-plane diffusive ability. These factors can serve as key indicators in quantitatively characterizing the mechanism for the structural transition of ILs inside a nanochannel and facilitate the rational design of nanopores and nanochannels to regulate the properties and structures of ILs in practical application scenarios.

In Situ Tracking of Partial Sodium Desolvation of Materials with Capacitive, Pseudocapacitive, and Battery-like Charge/Discharge Behavior in Aqueous Electrolytes

Aqueous electrolytes can be used for electrical double-layer capacitors, pseudocapacitors, and intercalation-type batteries. These technologies may employ different electrode materials, most importantly high-surface-area nanoporous carbon, two-dimensional materials, and metal oxides. All of these materials also find more and more applications in electrochemical desalination devices. During the electrochemical operation of such electrode materials, charge storage and ion immobilization are accomplished by non-Faradaic ion electrosorption, Faradaic ion intercalation at specific crystallographic sites, or ion insertion between layers of two-dimensional materials. These processes may or may not be associated with a (partial) loss of the aqueous solvation shell around the ions. Our work showcases the electrochemical quartz crystal microbalance as an excellent tool for quantifying the change in effective solvation. We chose sodium as an important cation for energy storage materials (sodium-based aqueous electrolytes) and electrochemical desalination (saline media). Our data show that a major amount of water uptake occurs during ion electrosorption in nanoporous carbon, while battery-like ion insertion between layers of titanium disulfide is associated with an 80% loss of the initially present solvation molecules. Sodiation of MXene is accomplished by a loss of 90% of the number of solvent molecules, but nanoconfined water in-between the MXene layers may compensate for this large degree of desolvation. In the case of sodium manganese oxide, we were able to demonstrate the full loss of the solvation shell.

Design and Mechanisms of Asymmetric Supercapacitors

Ongoing technological advances in diverse fields including portable electronics, transportation, and green energy are often hindered by the insufficient capability of energy-storage devices. By taking advantage of two different electrode materials, asymmetric supercapacitors can extend their operating voltage window beyond the thermodynamic decomposition voltage of electrolytes while enabling a solution to the energy storage limitations of symmetric supercapacitors. This review provides comprehensive knowledge to this field. We first look at the essential energy-storage mechanisms and performance evaluation criteria for asymmetric supercapacitors to understand the wide-ranging research conducted in this area. Then we move to the recent progress made for the design and fabrication of electrode materials and the overall structure of asymmetric supercapacitors in different categories. We also highlight several key scientific challenges and present our perspectives on enhancing the electrochemical performance of future asymmetric supercapacitors.

Nitrogen Codoped Unique Carbon with 0.4 nm Ultra-Micropores for Ultrahigh Areal Capacitance Supercapacitors

A full understanding of ion transport in porous carbon electrodes is essential for achieving effective energy storage in their applications as electrochemical supercapacitors. It is generally accepted that pores in the size range below 0.5 nm are inaccessible to electrolyte ions and lower the capacitance of carbon materials. Here, nitrogen-doped carbon with ultra-micropores smaller than 0.4 nm with a narrow size distribution, which represents the first example of electrode materials made entirely from ultra-microporous carbon, is prepared. An in situ electrochemical quartz crystal microbalance technique to study the effects of the ultra-micropores on charge storage in supercapacitors is used. It is found that ultra-micropores smaller than 0.4 nm are accessible to small electrolyte ions, and the area capacitance of obtained sample reaches the ultrahigh value of 330 µF cm^-2 , significantly higher than that of previously reported carbon-based materials. The findings provide a better understanding of the correlation between ultra-micropore structure and capacitance and open new avenues for design and development of carbon materials for the next generation of high energy density supercapacitors.

Selective observation of charge storing ions in supercapacitor electrode materials

Nuclear magnetic resonance (NMR) spectroscopy has emerged as a useful technique for probing the structure and dynamics of the electrode-electrolyte interface in supercapacitors, as ions inside the pores of the carbon electrodes can be studied separately from bulk electrolyte. However, in some cases spectral resolution can limit the information that can be obtained. In this study we address this issue by showing how cross polarisation (CP) NMR experiments can be used to selectively observe the in-pore ions in supercapacitor electrode materials. We do this by transferring magnetisation from ¹³C nuclei in porous carbons to nearby nuclei in the cations (¹H) or anions (¹⁹F) of an ionic liquid. Two-dimensional NMR experiments and CP kinetics measurements confirm that in-pore ions are located within Ångströms of sp²-hybridised carbon surfaces. Multinuclear NMR experiments hold promise for future NMR studies of supercapacitor systems where spectral resolution is limited.

In situ electrochemical electron paramagnetic resonance spectroscopy as a tool to probe electrical double layer capacitance

In situ electrochemical electron paramagnetic resonance (EPR) spectroscopy is presented as a means to distinguish between purely capacitive and pseudo-capacitive processes in supercapacitors.

Silica-grafted ionic liquids for revealing the respective charging behaviors of cations and anions in supercapacitors

Supercapacitors based on activated carbon electrodes and ionic liquids as electrolytes are capable of storing charge through the electrosorption of ions on porous carbons and represent important energy storage devices with high power delivery/uptake. Various computational and instrumental methods have been developed to understand the ion storage behavior, however, techniques that can probe various cations and anions of ionic liquids separately remain lacking. Here, we report an approach to monitoring cations and anions independently by using silica nanoparticle-grafted ionic liquids, in which ions attaching to silica nanoparticle cannot access activated carbon pores upon charging, whereas free counter-ions can. Aided by this strategy, conventional electrochemical characterizations allow the direct measurement of the respective capacitance contributions and acting potential windows of different ions. Moreover, coupled with electrochemical quartz crystal microbalance, this method can provide unprecedented insight into the underlying electrochemistry.

Partial breaking of the Coulombic ordering of ionic liquids confined in carbon nanopores

Ionic liquids are composed of equal quantities of positive and negative ions. In the bulk, electrical neutrality occurs in these liquids due to Coulombic ordering, in which ion shells of alternating charge form around a central ion. Their structure under confinement is far less well understood. This hinders the widespread application of ionic liquids in technological applications. Here we use scattering experiments to resolve the structure of a widely used ionic liquid (EMI-TFSI) when it is confined inside nanoporous carbons. We show that Coulombic ordering reduces when the pores can accommodate only a single layer of ions. Instead, equally charged ion pairs are formed due to the induction of an electric potential of opposite sign in the carbon pore walls. This non-Coulombic ordering is further enhanced in the presence of an applied external electric potential. This finding opens the door for the design of better materials for electrochemical applications.

Calibrating SANS data for instrument geometry and pixel sensitivity effects: access to an extended Q range

An improved data-reduction procedure is proposed and demonstrated for small-angle neutron scattering (SANS) measurements. Its main feature is the correction of geometry- and wavelength-dependent intensity variations on the detector in a separate step from the different pixel sensitivities: the geometric and wavelength effects can be corrected analytically, while pixel sensitivities have to be calibrated to a reference measurement. The geometric effects are treated for position-sensitive 3He proportional counter tubes, where they are anisotropic owing to the cylindrical geometry of the gas tubes. For the calibration of pixel sensitivities, a procedure is developed that is valid for isotropic and anisotropic signals. The proposed procedure can save a significant amount of beamtime which has hitherto been used for calibration measurements.

A carbon nanopore model to quantify structure and kinetics of ion electrosorption with in situ small-angle X-ray scattering

In situ small-angle X-ray scattering was carried out on a custom-built supercapacitor cell and is presented together with a novel data analysis strategy to study the structure and kinetics of ion electrosorption in a nanoporous carbon electrode.

New Perspectives on the Charging Mechanisms of Supercapacitors

Supercapacitors (or electric double-layer capacitors) are high-power energy storage devices that store charge at the interface between porous carbon electrodes and an electrolyte solution. These devices are already employed in heavy electric vehicles and electronic devices, and can complement batteries in a more sustainable future. Their widespread application could be facilitated by the development of devices that can store more energy, without compromising their fast charging and discharging times. In situ characterization methods and computational modeling techniques have recently been developed to study the molecular mechanisms of charge storage, with the hope that better devices can be rationally designed. In this Perspective, we bring together recent findings from a range of experimental and computational studies to give a detailed picture of the charging mechanisms of supercapacitors. Nuclear magnetic resonance experiments and molecular dynamics simulations have revealed that the electrode pores contain a considerable number of ions in the absence of an applied charging potential. Experiments and computer simulations have shown that different charging mechanisms can then operate when a potential is applied, going beyond the traditional view of charging by counter-ion adsorption. It is shown that charging almost always involves ion exchange (swapping of co-ions for counter-ions), and rarely occurs by counter-ion adsorption alone. We introduce a charging mechanism parameter that quantifies the mechanism and allows comparisons between different systems. The mechanism is found to depend strongly on the polarization of the electrode, and the choice of the electrolyte and electrode materials. In light of these advances we identify new directions for supercapacitor research. Further experimental and computational work is needed to explain the factors that control supercapacitor charging mechanisms, and to establish the links between mechanisms and performance. Increased understanding and control of charging mechanisms should lead to new strategies for developing next-generation supercapacitors with improved performances.

Atomic force microscopy studies on molybdenum disulfide flakes as sodium-ion anodes

A microscale battery comprised of mechanically exfoliated molybdenum disulfide (MoS2) flakes with copper connections and a sodium metal reference was created and investigated as an intercalation model using in situ atomic force microscopy in a dry room environment. While an ethylene carbonate-based electrolyte with a low vapor pressure allowed topographical observations in an open cell configuration, the planar microbattery was used to conduct in situ measurements to understand the structural changes and the concomitant solid electrolyte interphase (SEI) formation at the nanoscale. Topographical observations demonstrated permanent wrinkling behavior of MoS2 electrodes upon sodiation at 0.4 V. SEI formation occurred quickly on both flake edges and planes at voltages before sodium intercalation. Force spectroscopy measurements provided quantitative data on the SEI thickness for MoS2 electrodes in sodium-ion batteries for the first time.

Ion counting in supercapacitor electrodes using NMR spectroscopy

(19)F NMR spectroscopy has been used to study the local environments of anions in supercapacitor electrodes and to quantify changes in the populations of adsorbed species during charging. In the absence of an applied potential, anionic species adsorbed within carbon micropores (in-pore) are distinguished from those in large mesopores and spaces between particles (ex-pore) by a characteristic nucleus-independent chemical shift (NICS). Adsorption experiments and two-dimensional exchange experiments confirm that anions are in dynamic equilibrium between the in- and ex-pore environments with an exchange rate in the order of tens of Hz. (19)F in situ NMR spectra recorded at different charge states reveal changes in the intensity and NICS of the in-pore resonances, which are interpreted in term of changes in the population and local environments of the adsorbed anions that arise due to the charge-storage process. A comparison of the results obtained for a range of electrolytes reveals that several factors influence the charging mechanism. For a tetraethylammonium tetrafluoroborate electrolyte, positive polarisation of the electrode is found to proceed by anion adsorption at a low concentration, whereas increased ion exchange plays a more important role for a high concentration electrolyte. In contrast, negative polarization of the electrode proceeds by cation adsorption for both concentrations. For a tetrabutylammonium tetrafluoroborate electrolyte, anion expulsion is observed in the negative charging regime; this is attributed to the reduced mobility and/or access of the larger cations inside the pores, which forces the expulsion of anions in order to build up ionic charge. Significant anion expulsion is also observed in the negative charging regime for alkali metal bis(trifluoromethane)sulfonimide electrolytes, suggesting that more subtle factors also affect the charging mechanism.

In situ small angle neutron scattering revealing ion sorption in microporous carbon electrical double layer capacitors

Experimental studies showed the impact of the electrolyte solvents on both the ion transport and the specific capacitance of microporous carbons. However, the related structure-property relationships remain largely unclear and the reported results are inconsistent. The details of the interactions of the charged carbon pore walls with electrolyte ions and solvent molecules at a subnanometer scale are still largely unknown. Here for the first time we utilize in situ small angle neutron scattering (SANS) to reveal the electroadsorption of organic electrolyte ions in carbon pores of different sizes. A 1 M solution of tetraethylammonium tetrafluoroborate (TEATFB) salt in deuterated acetonitrile (d-AN) was used in an activated carbon with the pore size distribution similar to that of the carbons used in commercial double layer capacitors. In spite of the incomplete wetting of the smallest carbon pores by the d-AN, we observed enhanced ion sorption in subnanometer pores under the applied potential. Such results suggest the visible impact of electrowetting phenomena counterbalancing the high energy of the carbon/electrolyte interface in small pores. This behavior may explain the characteristic butterfly wing shape of the cyclic voltammetry curve that demonstrates higher specific capacitance at higher applied potentials, when the smallest pores become more accessible to electrolyte. Our study outlines a general methodology for studying various organic salts-solvent-carbon combinations.

In situ NMR spectroscopy of supercapacitors: insight into the charge storage mechanism

Electrochemical capacitors, commonly known as supercapacitors, are important energy storage devices with high power capabilities and long cycle lives. Here we report the development and application of in situ nuclear magnetic resonance (NMR) methodologies to study changes at the electrode-electrolyte interface in working devices as they charge and discharge. For a supercapacitor comprising activated carbon electrodes and an organic electrolyte, NMR experiments carried out at different charge states allow quantification of the number of charge storing species and show that there are at least two distinct charge storage regimes. At cell voltages below 0.75 V, electrolyte anions are increasingly desorbed from the carbon micropores at the negative electrode, while at the positive electrode there is little change in the number of anions that are adsorbed as the voltage is increased. However, above a cell voltage of 0.75 V, dramatic increases in the amount of adsorbed anions in the positive electrode are observed while anions continue to be desorbed at the negative electrode. NMR experiments with simultaneous cyclic voltammetry show that supercapacitor charging causes marked changes to the local environments of charge storing species, with periodic changes of their chemical shift observed. NMR calculations on a model carbon fragment show that the addition and removal of electrons from a delocalized system should lead to considerable increases in the nucleus-independent chemical shift of nearby species, in agreement with our experimental observations.

Sulfur-infiltrated micro- and mesoporous silicon carbide-derived carbon cathode for high-performance lithium sulfur batteries

Novel nanostructured sulfur (S)-carbide derived carbon (CDC) composites with ordered mesopores and high S content are successfully prepared for lithium sulfur batteries. The tunable pore-size distribution and high pore volume of CDC allow for an excellent electrochemical performance of the composites at high current densities. A higher electrolyte molarity is found to enhance the capacity utilization dramatically and reduce S dissolution in S-CDC composite cathodes during cycling.