CoBi3: A Binary Cobalt-Bismuth Compound and Superconductor

Remarkable Infrared Nonlinear Optical, Dielectric, and Strong Diamagnetic Characteristics of Semiconducting K3[BiS3]

The ternary sulfido bismuthate K₃[BiS₃] is synthesized in quantitative yields. The material exhibits nonlinear optical properties with strong second harmonic generation properties at arbitrary wavelengths in the infrared spectral range and a notable laser-induced damage threshold of 5.22 GW cm^-2 for pulsed laser radiation at a wavelength of 1040 nm, a pulse duration of 180 fs, and a repetition rate of 12.5 kHz. K₃[BiS₃] indicates semiconductivity with a direct optical band gap of 2.51 eV. Dielectric and impedance characterizations demonstrate κ values in the range of 6-13 at 1 kHz and a high electrical resistivity. A strong diamagnetic behavior with a susceptibility of -2.73 × 10^-4 m³ kg^-1 at room temperature is observed. These results suggest it is a promising nonlinear optical candidate for the infrared region. The synergic physical characteristics of K₃[BiS₃] provide insight into the correlation of optical, electrical, and magnetic properties.

Coexistence of Superconductivity and Nontrivial Band Topology in Monolayered Cobalt Pnictides on SrTiO3

As an intrinsically layered material, FeSe has been extensively explored for potentially revealing the underlying mechanisms of high transition temperature (high-T_c) superconductivity and realizing topological superconductivity and Majorana zero modes. Here we use first-principles approaches to identify that the cobalt pnictides of CoX (X = As, Sb, Bi), none of which is a layered material in bulk form. Nevertheless, all can be stabilized as monolayered systems either in freestanding form or supported on the SrTiO₃(001) substrate. We further show that each of the cobalt pnictides may potentially harbor high-T_c superconductivity beyond the Cu- and Fe-based superconducting families, and the underlying mechanism is inherently tied to their isovalency nature with the FeSe monolayer. Most strikingly, each of the monolayered CoX's on SrTiO₃ is shown to be topologically nontrivial, and our findings provide promising new platforms for realizing topological superconductors in the two-dimensional limit.

"Excess" electrons in LuGe

The monogermanide LuGe is obtained via high‐pressure high‐temperature synthesis (5–15 GPa, 1023–1423 K). The crystal structure is solved from single‐crystal X‐ray diffraction data (structure type FeB, space group Pnma, a=7.660(2) Å, b=3.875(1) Å, and c=5.715(2) Å, R_F=0.036 for 206 symmetry independent reflections). The analysis of chemical bonding applying quantum‐chemical techniques in position space was performed. It revealed—beside the expected 2c‐Ge‐Ge bonds in the germanium polyanion—rather unexpected four‐atomic bonds between lutetium atoms indicating the formation of a polycation by the excess electrons in the system Lu³⁺(2b)Ge²⁻×1 e⁻. Despite the reduced VEC of 3.5, lutetium monogermanide is following the extended 8‐N rule with the trend to form lutetium‐lutetium bonds utilizing the electrons left after satisfying the bonding needs in the anionic Ge‐Ge zigzag chain.

Evidence of High-Temperature Superconductivity at 18 K in Nanosized Rhombohedral Bi Enhanced by Ni-Doping

Superconductivity in bulk rhombohedral Bi has recently been detected to appear below 0.53 mK and 5.2 μT. Here, we unambiguously demonstrate that superconductivity in rhombohedral Bi can be greatly enhanced by incorporating Ni ions onto the Bi sites and reducing the size to the nanometer scale. The superconducting transition temperature T C of 12 nm rhombohedral Bi nanoparticles (NPs) reaches 4 K at ambient pressure. T C is significantly enhanced to reach 7, 12, and 18 K in 6, 8, and 10% Ni-doped Bi NPs, respectively, where superconductivity is found to coexist with ferromagnetism. Ni-doping causes a significant amount of electronic charges to shift toward the interconnecting regions between neighboring Bi ions. First-principles calculations reveal that the Ni ions serve as charge and spin suppliers for the developments of superconductivity and ferromagnetism.

High-Pressure Synthesis and Chemical Bonding of Barium Trisilicide BaSi₃

BaSi₃ is obtained at pressures between 12(2) and 15(2) GPa and temperatures from 800(80) and 1050(105) K applied for one to five hours before quenching. The new trisilicide crystallizes in the space group I4¯2m (no. 121) and adopts a unique atomic arrangement which is a distorted variant of the CaGe₃ type. At ambient pressure and 570(5) K, the compound decomposes in an exothermal reaction into (hP3)BaSi₂ and two amorphous silicon-rich phases. Chemical bonding analysis reveals covalent bonding in the silicon partial structure and polar multicenter interactions between the silicon layers and the barium atoms. The temperature dependence of electrical resistivity and magnetic susceptibility measurements indicate metallic behavior.

Discovery of Cu3Pb

Materials discovery enables both realization and understanding of new, exotic, physical phenomena. An emerging approach to the discovery of novel phases is high-pressure synthesis within diamond anvil cells, thereby enabling in situ monitoring of phase formation. Now, the discovery via high-pressure synthesis of the first intermetallic compound in the Cu-Pb system, Cu₃Pb is reported. Cu₃Pb is notably the first structurally characterized mid- to late-first-row transition-metal plumbide. The structure of Cu₃Pb can be envisioned as a direct mixture of the two elemental lattices. From this new framework, we gain insight into the structure as a function of pressure and hypothesize that the high-pressure polymorph of lead is a possible prerequisite for the formation of Cu₃Pb. Crucially, electronic structure computations reveal band crossings near the Fermi level, suggesting that chemically doped Cu₃Pb could be a topologically nontrivial material.

Prediction of superconducting iron-bismuth intermetallic compounds at high pressure

We report the discovery of novel iron-bismuth compounds, FeBi₂ and FeBi₃, at high-pressure.

The synthesis of materials in high-pressure experiments has recently attracted increasing attention, especially since the discovery of record breaking superconducting temperatures in the sulfur–hydrogen and other hydrogen-rich systems. Commonly, the initial precursor in a high pressure experiment contains constituent elements that are known to form compounds at ambient conditions, however the discovery of high-pressure phases in systems immiscible under ambient conditions poses an additional materials design challenge. We performed an extensive multi component ab initio structural search in the immiscible Fe–Bi system at high pressure and report on the surprising discovery of two stable compounds at pressures above ≈36 GPa, FeBi₂ and FeBi₃. According to our predictions, FeBi₂ is a metal at the border of magnetism with a conventional electron–phonon mediated superconducting transition temperature of T_c = 1.3 K at 40 GPa.

CoBi3--the first binary compound of cobalt with bismuth: high-pressure synthesis and superconductivity

The first compound in the cobalt bismuth system was synthesized by high-pressure high-temperature synthesis at 5 GPa and 450 °C. CoBi3 crystallizes in space group Pnma (no. 62) with lattice parameters of a = 8.8464(7) Å, b = 4.0697(4) Å and c = 11.5604(9) Å adopting a NiBi3-type crystal structure. CoBi3 undergoes a superconducting transition at Tc = 0.48(3) K as evidenced by electrical-resistivity and specific-heat measurements. Based on the anomaly of the specific heat at Tc and considering the estimated electron-phonon coupling, the new Bi-rich compound can be classified as a Bardeen-Cooper-Schrieffer-type superconductor with weak electron-phonon coupling. Density-functional theory calculations disclose a sizable influence of the spin-orbit coupling to the valence states and proximity to a magnetic instability, which accounts for a significantly enhanced Sommerfeld coefficient.