High-Quality Three-Dimensional Nanoporous Graphene

Chemical vapor deposition growth of graphene and other nanomaterials with 3D architectures towards electrocatalysis and secondary battery-related applications

Recently, two-dimensional (2D) layered materials, such as graphene and transition metal dichalcogenides (TMDCs), have garnered a lot of attention in energy storage/conversion-related fields due to their novel physical and chemical properties. Constructing flat graphene and TMDCs nanosheets into 3D architectures can significantly increase their exposed surface area and prevent the restacking of adjacent 2D layers, thus dramatically promoting their applications in various energy-related fields. Chemical Vapor Deposition (CVD) is a low-cost, facile, and scalable method, which has been widely employed to produce high-quality graphene and TMDCs nanosheets with 3D architectures. During the CVD process, the morphologies and properties of the 3D architectures of such 2D materials can be designed by selecting substrates with different compositions, stacking geometries, and micro-structures. In this review, we focus on the recent advances in the CVD synthesis of graphene, TMDCs, and their hybrids with 3D architectures on different 3D-structured substrates, as well as their applications in the electrocatalytic hydrogen evolution reaction (HER) and various secondary batteries. In addition, the challenges and future prospects for the CVD synthesis and energy-related applications of these unique layered materials will also be discussed.

Silicon Radical-Induced CH4 Dissociation for Uniform Graphene Coating on Silica Surface

Due to the manufacturability of highly well-defined structures and wide-range versatility in its microstructure, SiO2 is an attractive template for synthesizing graphene frameworks with the desired pore structure. However, its intrinsic inertness constrains the graphene formation via methane chemical vapor deposition. This work overcomes this challenge by successfully achieving uniform graphene coating on a trimethylsilyl-modified SiO2 (denote TMS-MPS). Remarkably, the onset temperature for graphene growth dropped to 720 °C for the TMS-MPS, as compared to the 885 °C of the pristine SiO2. This is found to be mainly from the Si radicals formed from the decomposition of the surface TMS groups. Both experimental and computational results suggest a strong catalytic effect of the Si radicals on the CH4 dissociation. The surface engineering of SiO2 templates facilitates the synthesis of high-quality graphene sheets. As a result, the graphene-coated SiO2 composite exhibits a high electrical conductivity of 0.25 S cm-1. Moreover, the removal of the TMP-MPS template has released a graphene framework that replicates the parental TMS-MPS template on both micro- and nano- scales. This study provides tremendous insights into graphene growth chemistries as well as establishes a promising methodology for synthesizing graphene-based materials with pre-designed microstructures and porosity.

Toward three-dimensionally ordered nanoporous graphene materials: template synthesis, structure, and applications

Precise template synthesis will realize three-dimensionally ordered nanoporous graphenes (NPGs) with a spatially controlled seamless graphene structure and fewer edges. These structural features result in superelastic nature, high electrochemical stability, high electrical conductivity, and fast diffusion of gases and ions at the same time. Such innovative 3D graphene materials are conducive to solving energy-related issues for a better future. To further improve the attractive properties of NPGs, we review the template synthesis and its mechanism by chemical vapor deposition of hydrocarbons, analysis of the nanoporous graphene structure, and applications in electrochemical and mechanical devices.

Block Copolymer-Directed Facile Synthesis of N-Doped Mesoporous Graphitic Carbon for Reliable, High-Performance Zn Ion Hybrid Supercapacitor

Ordered mesoporous carbons (OMCs) are promising materials for cathode materials of a Zn ion hybrid capacitor (Zn HC) due to their high surface area and interconnected porous structure. Graphitization of the framework and nitrogen doping have been used to improve the energy storage performance of the OMCs by enhancing electrical conductivity, pseudocapacitive reaction sites, and surface affinity toward aqueous electrolytes. Thus, when both methods are simultaneously implemented to the OMCs, the Zn HC would have improved energy storage performance. Herein, we introduce a facile synthetic method for N-doped mesoporous graphitic carbon (N-mgc) by utilizing polystyrene-block-poly(2-vinlypyridine) copolymer (PS-b-P2VP) as both soft-template and carbon/nitrogen sources. Co-assembly of PS-b-P2VP with Ni precursors for graphitization formed a mesostructured composite, which was converted to N-doped graphitic carbon through catalytic pyrolysis. After selective removal of Ni, N-mgc was prepared. The obtained N-mgc exhibited interconnected mesoporous structure with high nitrogen content and high surface area. When N-mgc was employed as a cathode material in Zn ion HC, excellent energy storage performance was achieved: a high specific capacitance (43 F/g at 0.2 A/g), a high energy density of 19.4 Wh/kg at a power density of 180 W/kg, and reliable cycle stability (>3000 cycles).

Surface defect healing in annealing from nanoporous carbons to nanoporous graphenes

Nanoporous graphene (NPG) materials have the pronounced electrochemical stability of the seamless graphene structures developed over the 3D space. We revisited the Raman spectra of nanoporous carbons (NPCs) synthesized using θ-/γ-Al2O3 templates and NPGs converted from NPCs by annealing at 1800 °C to identify the type and density of defects. We found that both the NPCs and NPGs mostly consist of single-layered graphene with a few single vacancies and Stone-Wales defects. The density of vacancy defect per hexagon in the graphene sheet is estimated to be 10-2 for NPCs, while the annealing reduced the value to 10-3-10-4 for NPGs. This supports the outstanding chemical and electrochemical stability of the novel porous carbon materials.

Defect and Donor Manipulated Highly Efficient Electron-Hole Separation in a 3D Nanoporous Schottky Heterojunction

Given the rapid recombination of photogenerated charge carriers and photocorrosion, transition metal sulfide photocatalysts usually suffer from modest photocatalytic performance. Herein, S-vacancy-rich ZnIn2S4 (VS-ZIS) nanosheets are integrated on 3D bicontinuous nitrogen-doped nanoporous graphene (N-npG), forming 3D heterostructures with well-fitted geometric configuration (VS-ZIS/N-npG) for highly efficient photocatalytic hydrogen production. The VS-ZIS/N-npG presents ultrafast interfacial photogenerated electrons captured by the S vacancies in VS-ZIS and holes neutralization behaviors by the extra free electrons in N-npG during photocatalysis, which are demonstrated by in situ XPS, femtosecond transient absorption (fs-TA) spectroscopy, and transient-state surface photovoltage (TS-SPV) spectra. The simulated interfacial charge rearrangement behaviors from DFT calculations also verify the separation tendency of photogenerated charge carriers. Thus, the optimized VS-ZIS/N-npG 3D hierarchical heterojunction with 1.0 wt % N-npG exhibits a comparably high hydrogen generation rate of 4222.4 μmol g-1 h-1, which is 5.6-fold higher than the bare VS-ZIS and 12.7-fold higher than the ZIS without S vacancies. This work sheds light on the rational design of photogenerated carrier transfer paths to facilitate charge separation and provides further hints for the design of hierarchical heterostructure photocatalysts.

Regulated Surface Electronic States of CuNi Nanoparticles through Metal-Support Interaction for Enhanced Electrocatalytic CO2 Reduction to Ethanol

Developing stable catalysts with higher selectivity and activity within a wide potential range is critical for efficiently converting CO2 to ethanol. Here, the carbon-encapsulated CuNi nanoparticles anchored on nitrogen-doped nanoporous graphene (CuNi@C/N-npG) composite are designedly prepared and display the excellent CO2 reduction performance with the higher ethanol Faradaic effiency (FEethanol  ≥ 60%) in a wide potential window (600 mV). The optimal cathodic energy efficiency (47.6%), Faradaic efficiency (84%), and selectivity (96.6%) are also obtained at -0.78 V versus reversible hydrogen electrode (RHE). Combining with the density functional theory (DFT) calculations, it is demonstrated that the stronger metal-support interaction (Ni-N-C) can regulate the surface electronic structure effectively, boosting the electron transfer and stabilizing the active sites (Cu0 -Cuδ+ ) on the surface of CuNi@C/N-npG, finally realizing the controllable transition of reaction intermediates. This work may guide the designs of electrocatalysts with highly catalytic performance for CO2 reduction to C2+ products.

3D Printed Graphene-Based Metamaterials: Guesting Multi-Functionality in One Gain

Advanced functional materials with fascinating properties and extended structural design have greatly broadened their applications. Metamaterials, exhibiting unprecedented physical properties (mechanical, electromagnetic, acoustic, etc.), are considered frontiers of physics, material science, and engineering. With the emerging 3D printing technology, the manufacturing of metamaterials becomes much more convenient. Graphene, due to its superior properties such as large surface area, superior electrical/thermal conductivity, and outstanding mechanical properties, shows promising applications to add multi-functionality into existing metamaterials for various applications. In this review, the aim is to outline the latest developments and applications of 3D printed graphene-based metamaterials. The structure design of different types of metamaterials and the fabrication strategies for 3D printed graphene-based materials are first reviewed. Then the representative explorations of 3D printed graphene-based metamaterials and multi-functionality that can be introduced with such a combination are further discussed. Subsequently, challenges and opportunities are provided, seeking to point out future directions of 3D printed graphene-based metamaterials.

Construction and application of carbon aerogels in microwave absorption

Electromagnetic pollution that threatens human health, the ecological environment and electronic equipment has been recognized as a serious environmental issue. In view of this, microwave absorbing materials (MAMs) are urgently required in modern society. Compared with traditional MAMs, carbon aerogels have inherent advantages in microwave absorption because of their high porosity and controllable conductive networks. Moreover, they are self-supporting 3D architectures with tailorable shapes, which satisfy most application scenarios. Therefore, carbon aerogels have aroused great interest in recent years and are being developed as promising absorption materials. In this review, we emphasize recent developments in carbon-aerogel-based MAMs constructed with some typical carbon nanomaterials, including graphene, carbon nanotubes and pyrolytic carbon. Their preparation methods, especially some newly developed strategies, are introduced as well as their influence on the structures and properties of aerogels. With a brief analysis of classic microwave absorption processes, we propose the requirements and strategies for modifying carbon aerogels to achieve ideal microwave absorption performance. Finally, we provide comprehensive comparisons of the MA performances of various carbon aerogels that show application potential and set forth the challenges and prospects of this kind of MAM.

Tuning the Electronic Response of Metallic Graphene by Potassium Doping

Electron doping of graphene has been extensively studied on graphene-supported surfaces, where the metallicity is influenced by the substrate. Herewith we propose potassium adsorption on free-standing nanoporous graphene, thus eluding any effect due to the substrate. We monitor the electron migration in the π* downward-shifted conduction band. In this rigid band shift, we correlate the spectral density of the π* state in the upper Dirac cone with the associated plasmon, blue-shifted with increasing K dose, as deduced by electron energy loss spectroscopy. These results are confirmed by the Dirac plasmon activated by the C 1s emitted electrons, thanks to spatially resolved photoemission. This crosscheck constitutes a reference on the correlation between the electronic π* states in the conduction band and the Dirac plasmon evolution upon in situ electron doping of fully free-standing graphene.

Coexistence of Urbach-Tail-Like Localized States and Metallic Conduction Channels in Nitrogen-Doped 3D Curved Graphene

Nitrogen (N) doping is one of the most effective approaches to tailor the chemical and physical properties of graphene. By the interplay between N dopants and 3D curvature of graphene lattices, N-doped 3D graphene displays superior performance in electrocatalysis and solar-energy harvesting for energy and environmental applications. However, the electrical transport properties and the electronic states, which are the key factors to understand the origins of the N-doping effect in 3D graphene, are still missing. The electronic properties of N-doped 3D graphene are systematically investigated by an electric-double-layer transistor method. It is demonstrated that Urbach-tail-like localized states are located around the neutral point of N-doped 3D graphene with the background metallic transport channels. The dual nature of electronic states, generated by the synergistic effect of N dopants and 3D curvature of graphene, can be the electronic origin of the high electrocatalysis, enhanced molecular adsorption, and light absorption of N-doped 3D graphene.

Homogeneous Spatial Distribution of Deuterium Chemisorbed on Free-Standing Graphene

Atomic deuterium (D) adsorption on free-standing nanoporous graphene obtained by ultra-high vacuum D2 molecular cracking reveals a homogeneous distribution all over the nanoporous graphene sample, as deduced by ultra-high vacuum Raman spectroscopy combined with core-level photoemission spectroscopy. Raman microscopy unveils the presence of bonding distortion, from the signal associated to the planar sp2 configuration of graphene toward the sp3 tetrahedral structure of graphane. The establishment of D–C sp3 hybrid bonds is also clearly determined by high-resolution X-ray photoelectron spectroscopy and spatially correlated to the Auger spectroscopy signal. This work shows that the low-energy molecular cracking of D2 in an ultra-high vacuum is an efficient strategy for obtaining high-quality semiconducting graphane with homogeneous uptake of deuterium atoms, as confirmed by this combined optical and electronic spectro-microscopy study wholly carried out in ultra-high vacuum conditions.

Gap Opening in Double-Sided Highly Hydrogenated Free-Standing Graphene

Conversion of free-standing graphene into pure graphane─where each C atom is sp³ bound to a hydrogen atom─has not been achieved so far, in spite of numerous experimental attempts. Here, we obtain an unprecedented level of hydrogenation (≈90% of sp³ bonds) by exposing fully free-standing nanoporous samples─constituted by a single to a few veils of smoothly rippled graphene─to atomic hydrogen in ultrahigh vacuum. Such a controlled hydrogenation of high-quality and high-specific-area samples converts the original conductive graphene into a wide gap semiconductor, with the valence band maximum (VBM) ∼ 3.5 eV below the Fermi level, as monitored by photoemission spectromicroscopy and confirmed by theoretical predictions. In fact, the calculated band structure unequivocally identifies the achievement of a stable, double-sided fully hydrogenated configuration, with gap opening and no trace of π states, in excellent agreement with the experimental results.

3D Continuously Porous Graphene for Energy Applications

Constructing bulk graphene materials with well-reserved 2D properties is essential for device and engineering applications of atomically thick graphene. In this article, the recent progress in the fabrications and applications of sterically continuous porous graphene with designable microstructures, chemistries, and properties for energy storage and conversion are reviewed. Both template-based and template-free methods have been developed to synthesize the 3D continuously porous graphene, which typically has the microstructure reminiscent of pseudo-periodic minimal surfaces. The 3D graphene can well preserve the properties of 2D graphene of being highly conductive, surface abundant, and mechanically robust, together with unique 2D electronic behaviors. Additionally, the bicontinuous porosity and large curvature offer new functionalities, such as rapid mass transport, ample open space, mechanical flexibility, and tunable electric/thermal conductivity. Particularly, the 3D curvature provides a new degree of freedom for tailoring the catalysis and transport properties of graphene. The 3D graphene with those extraordinary properties has shown great promises for a wide range of applications, especially for energy conversion and storage. This article overviews the recent advances made in addressing the challenges of developing 3D continuously porous graphene, the benefits and opportunities of the new materials for energy-related applications, and the remaining challenges that warrant future study.

Defective porous carbon microrods derived from fullerenes (C70) as high-performance electrocatalysts for the oxygen reduction reaction

Disrupting the integrity of the sp²-carbon skeleton offers an effective strategy to create active sites for the oxygen reduction reaction (ORR). In this work, fullerene (C₇₀) molecules, composed of 12 pentagons and 25 hexagons all bonded by sp²-C atoms, are assembled into microrods (C70MRs) at the liquid-liquid interface and then broken down by calcination to generate metal-free fullerene-derived ORR electrocatalysts. The effect of the pyrolysis temperature on C70MRs is investigated, and it is found that pyrolysis at 900 °C effectively unfolds the C₇₀ cages and converts them into a highly porous, defect-rich carbon material (C70MRs-900) with the rod-shaped morphology well-retained. These structural features endow C70MRs-900 with outstanding ORR activity and stability together with remarkable methanol tolerance, better than C70MRs annealed at either lower (800 °C) or higher (1000 °C) temperatures. Furthermore, nitrogen atoms are successfully incorporated into the defective carbon skeleton by annealing C70MRs at 900 °C in the presence of NH₄Cl. The resultant N-doped C70MRs-900 exhibits remarkable ORR performance with a half-wave potential of 0.836 V, comparable to that of the commercial 20% Pt/C catalyst. This work presents a simple and effective route of utilizing fullerene molecules as starting materials to develop high-performance metal-free, carbon-based electrocatalysts toward the ORR and even beyond.

Atomic Ni and Cu co-anchored 3D nanoporous graphene as an efficient oxygen reduction electrocatalyst for zinc-air batteries

Highly active, cost-effective and durable electrocatalysts for the oxygen reduction reaction (ORR) are critically important for renewable energy conversion and storage. Here we report a 3D bicontinuous nitrogen doped nanoporous graphene electrocatalyst co-anchoring with atomically dispersed nickel and copper atoms ((Ni,Cu)-NG) as a highly active single-atom ORR catalyst, fabricated by the combination of chemical vapor deposition and high temperature gas transportation. The resultant (Ni,Cu)-NG exhibits an exceptional ORR activity in alkaline electrolytes, comparable to the Pt-based benchmarks, from the synergistic effect of the CuNx and NiNx complexes. Endowed with high catalytic activity and outstanding durability under harsh electrochemical environments, rechargeable zinc-air batteries using (Ni,Cu)-NG as the cathodes show excellent energy efficiency (voltage gap of 0.74 V), large power density (150.6 mW cm-2 at 250 mA cm-2) and high cycling stability (>500 discharge-charge cycles at 10 mA cm-2). This study may pave an efficient avenue for designing highly durable single-atom ORR catalysts for metal-air batteries.

Structural Defects, Mechanical Behaviors, and Properties of Two-Dimensional Materials

Since the success of monolayer graphene exfoliation, two-dimensional (2D) materials have been extensively studied due to their unique structures and unprecedented properties. Among these fascinating studies, the most predominant focus has been on their atomic structures, defects, and mechanical behaviors and properties, which serve as the basis for the practical applications of 2D materials. In this review, we first highlight the atomic structures of various 2D materials and the structural and energy features of some common defects. We then summarize the recent advances made in experimental, computational, and theoretical studies on the mechanical properties and behaviors of 2D materials. We mainly emphasized the underlying deformation and fracture mechanisms and the influences of various defects on mechanical behaviors and properties, which boost the emergence and development of topological design and defect engineering. We also further introduce the piezoelectric and flexoelectric behaviors of specific 2D materials to address the coupling between mechanical and electronic properties in 2D materials and the interactions between 2D crystals and substrates or between different 2D monolayers in heterostructures. Finally, we provide a perspective and outlook for future studies on the mechanical behaviors and properties of 2D materials.

Towards free-standing graphane: atomic hydrogen and deuterium bonding to nano-porous graphene

Graphane is formed by bonding hydrogen (and deuterium) atoms to carbon atoms in the graphene mesh, with modification from the pure planar sp² bonding towards an sp³ configuration. Atomic hydrogen (H) and deuterium (D) bonding with C atoms in fully free-standing nano porous graphene (NPG) is achieved, by exploiting low-energy proton (or deuteron) non-destructive irradiation, with unprecedented minimal introduction of defects, as determined by Raman spectroscopy and by the C 1s core level lineshape analysis. Evidence of the H- (or D-) NPG bond formation is obtained by bringing to light the emergence of a H- (or D-) related sp³-distorted component in the C 1s core level, clear fingerprint of H-C (or D-C) covalent bonding. The H (or D) bonding with the C atoms of free-standing graphene reaches more than 1/4 (or 1/3) at% coverage. This non-destructive H-NPG (or D-NPG) chemisorption is very stable at high temperatures up to about 800 K, as monitored by Raman and x-ray photoelectron spectroscopy, with complete healing and restoring of clean graphene above 920 K. The excellent chemical and temperature stability of H- (and D-) NPG opens the way not only towards the formation of semiconducting graphane on large-scale samples, but also to stable graphene functionalisation enabling futuristic applications in advanced detectors for the β-spectrum analysis.

Deuterium Adsorption on Free-Standing Graphene

A suitable way to modify the electronic properties of graphene—while maintaining the exceptional properties associated with its two-dimensional (2D) nature—is its functionalisation. In particular, the incorporation of hydrogen isotopes in graphene is expected to modify its electronic properties leading to an energy gap opening, thereby rendering graphene promising for a widespread of applications. Hence, deuterium (D) adsorption on free-standing graphene was obtained by high-energy electron ionisation of D2 and ion irradiation of a nanoporous graphene (NPG) sample. This method allows one to reach nearly 50 at.% D upload in graphene, higher than that obtained by other deposition methods so far, towards low-defect and free-standing D-graphane. That evidence was deduced by X-ray photoelectron spectroscopy of the C 1s core level, showing clear evidence of the D-C sp3 bond, and Raman spectroscopy, pointing to remarkably clean and low-defect production of graphane. Moreover, ultraviolet photoelectron spectroscopy showed the opening of an energy gap in the valence band. Therefore, high-energy electron ionisation and ion irradiation is an outstanding method for obtaining low defect D-NPG with a high D upload, which is very promising for the fabrication of semiconducting graphane on large scale.

Review on synthesis of three-dimensional graphene skeletons and their absorption performance for oily wastewater

Water pollution is a global environmental problem that affects the ecosystem severely. Treatment of oily wastewater and organic pollutants is a major challenge that waits to be solved as soon as possible. Adsorbing is one of the most effective strategies to deal with this problem. Three-dimensional (3D) porous adsorbents made of graphene or graphene-based nanomaterials skeletons had attracted more attention in wastewater treatment because of their large surface area, high porosity, low density, high chemical/thermal stability, and steady mechanical properties, which allow different pollutants to easily access and diffuse into 3D networks of adsorbents. This work presents an extensive summarization of recent progress in the synthesis methodologies and microstructures of 3D graphene foams and 3D graphene-based foams and highlights their adsorption performance for oils and organic solvents. Advantages and disadvantages of various preparation strategies are compared and the corresponded structures of these skeletons are studied in detail. Furthermore, the effects of the structures on oil-adsorption properties are analyzed and some data and parameters of the oil-adsorption properties are listed and studied for easier comparison. At last, the future research directions and technical challenges are prospected, which is hoped that the researchers will be inspired to develop the new graphene-based adsorbents.

Hierarchical NiCo2Se4 nanoneedles/nanosheets with N-doped 3D porous graphene architecture as free-standing anode for superior sodium ion batteries

In order to cope with the problem of insufficient lithium metal reserves, sodium ion batteries (SIBs) are proposed and extensively studied for the next-generation batteries. In our work, hierarchical NiCo₂Se₄ nanoneedles/nanosheets are deposited on the skeleton of N-doped three dimensional porous graphene (NPG) by a convenient solvothermal method and subsequent gas-phase selenization process. Compared with NiCo₂Se₄ powder, the optimized NiCo₂Se₄/N-doped porous graphene composite (denoted as NCS@NPG) as self-supporting anode exhibits the excellent electrode activity for SIBs, with a specific capacity of 500 mAh/g and 257 mAh/g at a current density of 0.2 A/g and 6.4 A/g, respectively. The high specific capacity as well as rate capacity can be attributed to the three-dimensional graphene skeleton with high electrical conductivity and pore structure, which provides convenient ion and electron transmission channels.

Dirac Fermion Kinetics in 3D Curved Graphene

3D integration of graphene has attracted attention for realizing carbon-based electronic devices. While the 3D integration can amplify various excellent properties of graphene, the influence of 3D curved surfaces on the fundamental physical properties of graphene has not been clarified. The electronic properties of 3D nanoporous graphene with a curvature radius down to 25-50 nm are systematically investigated and the ambipolar electronic states of Dirac fermions are essentially preserved in the 3D graphene nanoarchitectures, while the 3D curvature can effectively suppress the slope of the linear density of states of Dirac fermion near the Fermi level are demonstrated. Importantly, the 3D curvature can be utilized to tune the back-scattering-suppressed electrical transport of Dirac fermions and enhance both electron localization and electron-electron interaction. As a result, nanoscale curvature provides a new degree of freedom to manipulate 3D graphene electrical properties, which may pave a new way to design new 3D graphene devices with preserved 2D electronic properties and novel functionalities.

Free-standing SnS/carbonized cellulose film as durable anode for lithium-ion batteries

Metal sulfides have recently attracted broad attention for lithium-ion batteries (LIB) owing to their high theoretical capacity and long lifetime. However, the inferior structural integrity and low electron conductivity of metal sulfides limit their practical applications. A feasible strategy is to distribute these materials in conductive carbonaceous substrates with shapeable morphology. Here we report the design of free-standing films of tin sulfide (SnS) nanosheets distributed uniformly on carbonized bacterial cellulose (CBC) nanofibers. The SnS/CBC composites possess three dimensional interconnected nanostructures, which is crucial for the high conductivity and high lithium storage capacity. LIB using SnS/CBC as anode exhibits a reversible capacity of 872 mA h g^-1 at 100 mA g^-1 after 100 cycles, and the capacity remains as high as 527 mA h g^-1 at 2000 mA g^-1 after 1000 cycles. The free-standing sulfide-based nanocomposites with unique nanostructure composition and flexibility could be utilized as promising electrode materials for future LIB systems.

Bismuth/Porous Graphene Heterostructures for Ultrasensitive Detection of Cd (II)

Heavy metals pollution is one of the key problems of environment protection. Electrochemical methods, particularly anodic stripping voltammetry, have been proven a powerful tool for rapid detection of heavy metal ions. In the present work, a bismuth modified porous graphene (Bi@PG) electrode as an electrochemical sensor was adopted for the detection of heavy metal Cd2+ in an aqueous solution. Combining excellent electronic properties in sensitivity, peak resolution, and high hydrogen over-potential of bi-continuous porous Bi with the large surface-area and high conductivity on PG, the Bi@PG electrode exhibited excellent sensing ability. The square wave anodic stripping voltammetry response showed a perfect liner range of 10-9-10-8 M with a correlation coefficient of 0.9969. The limit of detection (LOD) and the limit of quantitation (LOQ) are calculated to be 0.1 and 0.34 nM with a sensitivity of 19.05 μA·nM-1, which is relatively excellent compared to other carbon-based electrodes. Meanwhile, the Bi@PG electrode showed tremendous potential in composite detection of multifold heavy metals (such as Pb2+ and Cd2+) and wider linear range.

General Synthesis of Nanoporous 2D Metal Compounds with 3D Bicontinous Structure

Although 2D layered metal compounds are widely exploited using various techniques such as exfoliation and vapor-phase-assisted growth, it is still challenging to construct the 2D materials in a 3D configuration with preservation of the unique physicochemical properties of the metal compounds. Herein, a general synthetic strategy is reported for a wide variety of 2D (atomic-scale thickness) metal compounds with 3D bicontinous nanoporous structure. 19 binary compounds including sulfides, selenides, tellurides, carbides, and nitrides, and five alloyed compounds, are successfully prepared via a surface alloy strategy, which are readily created by using a recyclable nanoporous gold assisted chemical vapor deposition process. These 3D nanoporous metal compounds with preserved 2D physicochemical properties, tunable pore sizes, and compositions for electrocatalytic applications, show excellent catalytic performance in the electrochemical N₂ reduction reaction. This work opens up a promising avenue for fundamental studies and potential applications of a wide variety of nanoporous metal compounds.

3D Graphene Materials: From Understanding to Design and Synthesis Control

Carbon materials, with their diverse allotropes, have played significant roles in our daily life and the development of material science. Following 0D C₆₀ and 1D carbon nanotube, 2D graphene materials, with their distinctively fascinating properties, have been receiving tremendous attention since 2004. To fulfill the efficient utilization of 2D graphene sheets in applications such as energy storage and conversion, electrochemical catalysis, and environmental remediation, 3D structures constructed by graphene sheets have been attempted over the past decade, giving birth to a new generation of graphene materials called 3D graphene materials. This review starts with the definition, classifications, brief history, and basic synthesis chemistries of 3D graphene materials. Then a critical discussion on the design considerations of 3D graphene materials for diverse applications is provided. Subsequently, after emphasizing the importance of normalized property characterization for the 3D structures, approaches for 3D graphene material synthesis from three major types of carbon sources (GO, hydrocarbons and inorganic carbon compounds) based on GO chemistry, hydrocarbon chemistry, and new alkali-metal chemistry, respectively, are comprehensively reviewed with a focus on their synthesis mechanisms, controllable aspects, and scalability. At last, current challenges and future perspectives for the development of 3D graphene materials are addressed.

Intriguing Carbon Flake Formation during Microwave-Assisted Hydrothermal Carbonization of Sodium Lignosulfonate

Elongated carbon structures, here denoted as carbon flakes (CF), are revealed after microwave-assisted hydrothermal carbonization of sodium lignosulfonate. The morphology of formed CF is investigated by transmission electron microscopy and atomic force microscopy. Interestingly, a wide range of length distributions (between 100 and 700 nm) and a relatively constant aspect ratio and thickness are observed, indicating structures clearly different from the carbon spheres commonly formed during hydrothermal carbonization of lignocellulosic biomass. Moreover, X-ray diffraction, Raman spectroscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy provide further information of the chemical structure, which consist mainly of nanographitic domains with a high degree of defects such as oxygenated functional groups, hybridized sp3 carbon, and aliphatic side chains. Furthermore, new insights into the formation mechanisms are uncovered and the formation is speculated to proceed through the combined effect of microwave irradiation and a heterogeneous solid-solid conversion. The formed CF are anticipated as highly interesting products for a variety of material applications.

Strategies for development of nanoporous materials with 2D building units

It has already been realized that two-dimensional (2D) materials carry a great potential in energy conversion and storage, gas storage, chemical sensing, and many other applications closely related to human life. These applications benefit from a key feature of 2D materials, namely the large specific surface area, which however can be diminished significantly due to the tendency of these materials to restack. In this review, we revisit the strategies - including soft and hard templating - that have been developed for generating nanoporosity in 3D materials and demonstrate their adaptation for 2D materials using carbon nitride and graphene materials as examples. Owing to the 2D nature of the building units, a new type of nanopore can be generated by perforating the basal planes. These in-plane nanopores are essential in many emerging applications of 2D materials such as semipermeable membranes; hence, their creation methods, including post-synthesis activation, ion bombardment, electron beam drilling, and nanolithography, are worthy of a critical review. Lastly, techniques for preventing the restacking by fabricating 2D-0D, 2D-1D, and 2D-2D layer-by-layer composite structures are discussed. The goal is to promote the use of these methods for creating nanoporosity in more 2D materials.

Dealloyed Nanoporous Materials for Rechargeable Post-Lithium Batteries

Nanoporous materials (NPMs) made by dealloying have been well recognized as multifunctional electrodes for lithium-ion batteries (LIBs). In recent years, there are ever-increasing demands on grid-scale energy storage devices composed by earth-abundant elements such as Na, K, Mg, Al, and Zn. Compared to LIBs, these electrochemical cells face critical challenges such as slow kinetics of redox reactions and structural instability owing to large ion size and/or multiple-electron process. Much interest has been focused on NPMs to address these issues with great success. This Minireview discusses the recent research progresses on these novel electrode materials in the emerging post-lithium batteries, including the rational-design of NPMs, structure-performance correlation in each battery system, and insights into future development of this rapidly growing field.

Exploring the structure-property relationship of three-dimensional hexagonal boron nitride aerogels with gyroid surfaces

Three-dimensional hexagonal boron nitride aerogels (hBNAGs) are novel porous materials with many promising applications such as energy storage, thermal insulation and sensing. However, the structure-property relationships of hBNAGs in complicated thermo-mechanical coupled environments are still not clear. In this study, we employed a binary phase-field crystal (PFC) model to construct the atomic structures of hBNAGs, upon which the mechanical and thermal behaviors of hBNAGs were systematically investigated using large-scale atomistic simulations. It is found that the hBNAG geometry and topological defects strongly affect the mechanical and thermal properties. For example, the Young's modulus and tensile strength follow the scaling laws of mass density with a power factor of about 1.4 and 1.2, respectively, indicating that the stretching and bending combine toward tensile deformation. In addition, cracks nucleate around the octagon defects, indicating that the tensile strength is also influenced by the topological defects. Under compression, complicated crumpled deformations and ridges in the entire region are observed and the compression strength follows the scaling law of mass density with a power factor above 2.0, which means that a large portion of the hBNAGs do not contribute to the compression load bearing. We find that hBNAGs have a very low thermal conductivity of about two orders of magnitude lower than that of a hBN sheet. Also, the thermal conductivity of hBNAGs increases with increasing mass density, which also follows a scaling law. The power of the scaling law is about 0.5, indicating that the thermal conductivity has a strong nonlinear dependence on the mass density. Our work provides a deep understanding of the structure-property relationships of hBNAGs, which is useful for the engineering applications of hBNAGs.

Understanding the Detection Mechanisms and Ability of Molecular Hydrogen on Three-Dimensional Bicontinuous Nanoporous Reduced Graphene Oxide

Environmental safety has become increasingly important with respect to hydrogen use in society. Monitoring techniques for explosive gaseous hydrogen are essential to ensure safety in sustainable hydrogen utilization. Here, we reveal molecular hydrogen detection mechanisms with monolithic three-dimensional nanoporous reduced graphene oxide under gaseous hydrogen flow and at room temperature. Nanoporous reduced graphene oxide significantly increased molecular hydrogen physisorption without the need to employ catalytic metals or heating. This can be explained by the significantly increased surface area in comparison to two-dimensional graphene sheets and conventional reduced graphene oxide flakes. Using this large surface area, molecular hydrogen adsorption behaviors were accurately observed. In particular, we found that the electrical resistance firstly decreased and then gradually increased with higher gaseous hydrogen concentrations. The resistance decrease was due to charge transfer from the molecular hydrogen to the reduced graphene oxide at adsorbed molecular hydrogen concentrations lower than 2.8 ppm; conversely, the resistance increase was a result of Coulomb scattering effects at adsorbed molecular hydrogen concentrations exceeding 5.0 ppm, as supported by density functional theory. These findings not only provide the detailed adsorption mechanisms of molecular hydrogen, but also advance the development of catalyst-free non-heated physisorption-type molecular detection devices.

Precise control of versatile microstructure and properties of graphene aerogel via freezing manipulation

A deep understanding of the shaping technique is urgently required to precisely tailor the pore structure of a graphene aerogel (GA) in order to fit versatile application backgrounds. In the present study, the microstructure and properties of GA were regulated by freeze-casting using an ice crystal template frozen from -10 °C to -196 °C. The phase field simulation method was applied to probe the microstructural evolution of the graphene-H2O system during freezing. Both the experimental and simulation results suggested that the undercooling degree was fundamental to the nucleation and growth of ice crystals and dominated the derived morphology of GA. The pore size of GA was largely regulated from 240 to 6 μm via decreasing the freezing temperature from -10 °C to -196 °C but with a constant density of 8.3 mg cm-3. Rapid freeze casting endowed GA with a refined pore structure and therefore better thermal, electrical, and compressive properties, whereas the GA frozen slowly had superior absorption properties owing to the continuous and tube-like graphene lamellae. The GA frozen at -196 °C exhibited the highest Young's modulus of 327 kPa with similar densities to those reported in the literature. These findings demonstrate the diverse potential applications of GA with regulated pore morphologies and also contribute to cryogenic-induced phase separation methods.

Noble metal-free two dimensional carbon-based electrocatalysts for water splitting

Noble metal materials are widely employed as benchmark electrocatalysts to achieve electrochemical water splitting which comprises of hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). However, the high cost and scarcity limit the wide ranging commercial applications of noble metal-based catalysts. Development of noble metal-free two dimensional (2D) carbon-based materials can not only reduce the consumption of noble metals, but also create materials with the characteristics of high active surface area, abundance, easy functionalization, and chemical stability, which may carve a way to promising electrochemical water splitting. In this review, noble metal-free 2D carbon-based electrocatalysts, including heteroatom (B, S, N, P, F, and O) doped graphene, 2D porous carbons modified with heteroatoms and/or transition metals, and 2D carbon-based hybrids are introduced as cost-effective alternatives to the noble metal-based electrocatalysts with comparable efficiencies to conduct HER, OER, and overall water splitting. This review emphasizes on current development in synthetic strategies and structure–property relationships of noble metal-free 2D carbon-based electrocatalysts, together with major challenges and perspectives of noble metal-free 2D carbon-based electrocatalysts for further electrochemical applications.

Low-Temperature Conversion of Alcohols into Bulky Nanoporous Graphene and Pure Hydrogen with Robust Selectivity on CaO

The direct conversion of biorenewable alcohols into value-added graphene and pure hydrogen (H₂ ) at benign conditions is an important challenge, especially, considering the open carbon-reduced cycle. In this study, it is demonstrated that inexpensive calcium oxide (CaO, from eggshells) can transform alcohols into bulky nanoporous graphene and pure hydrogen (≈99%) with robust selectivity at the temperature as low as 500 °C. Consequently, the growth of graphene can follow the direction of alcohol flow and uniformly penetrate into bulky nanoporous CaO platelets longer than 1 m without clogging. The experimental results and density functional theory calculations demonstrate that alcohol molecules can be catalytically carbonized on the surface of CaO at low temperature. The concept of the comprehensive utilization of biomass-derived alcohols offers a carbon-negative cycle for mitigating global warming and the energy demand.

Polymeric Graphene Bulk Materials with a 3D Cross-Linked Monolithic Graphene Network

Although many great potential applications are proposed for graphene, till now none are yet realized as a stellar application. The most challenging issue for such practical applications is to figure out how to prepare graphene bulk materials while maintaining the unique two-dimensional (2D) structure and the many excellent properties of graphene sheets. Herein, such polymeric graphene bulk materials containing three-dimensional (3D) cross-linked networks with graphene sheets as the building unit are reviewed. The theoretical research on various proposed structures of graphene bulk materials is summarized first. Then, the synthesis or fabrication of these graphene materials is described, which comprises mainly two approaches: chemical vapor deposition and cross-linking using graphene oxide directly. Finally, some exotic and exciting potential applications of these graphene bulk materials are presented.

Extraordinary tensile strength and ductility of scalable nanoporous graphene

While the compressive strength-density scaling relationship of ultralight cellular graphene materials has been extensively investigated, high tensile strength and ductility have not been realized in the theoretically strongest carbon materials because of high flaw sensitivity under tension and weak van der Waals interplanar bonding between graphene sheets. In this study, we report that large-scale ultralight nanoporous graphene with three-dimensional bicontinuous nanoarchitecture shows orders of magnitude higher strength and elastic modulus than all reported ultralight carbon materials under both compression and tension. The high-strength nanoporous graphene also exhibits excellent tensile ductility and work hardening, which are comparable to well-designed metamaterials but until now had not been realized in ultralight cellular materials. The excellent mechanical properties of the nanoporous graphene benefit from seamless graphene sheets in the bicontinuous nanoporosity that effectively preserves the intrinsic strength of atomically thick graphene in the three-dimensional cellular nanoarchitecture.

Lithium intercalation into bilayer graphene

The real capacity of graphene and the lithium-storage process in graphite are two currently perplexing problems in the field of lithium ion batteries. Here we demonstrate a three-dimensional bilayer graphene foam with few defects and a predominant Bernal stacking configuration, and systematically investigate its lithium-storage capacity, process, kinetics, and resistances. We clarify that lithium atoms can be stored only in the graphene interlayer and propose the first ever planar lithium-intercalation model for graphenic carbons. Corroborated by theoretical calculations, various physiochemical characterizations of the staged lithium bilayer graphene products further reveal the regular lithium-intercalation phenomena and thus fully illustrate this elementary lithium storage pattern of two-dimension. These findings not only make the commercial graphite the first electrode with clear lithium-storage process, but also guide the development of graphene materials in lithium ion batteries.

Catalysis with Two-Dimensional Materials Confining Single Atoms: Concept, Design, and Applications

Two-dimensional materials and single-atom catalysts are two frontier research fields in catalysis. A new category of catalysts with the integration of both aspects has been rapidly developed in recent years, and significant advantages were established to make it an independent research field. In this Review, we will focus on the concept of two-dimensional materials confining single atoms for catalysis. The new electronic states via the integration lead to their mutual benefits in activity, that is, two-dimensional materials with unique geometric and electronic structures can modulate the catalytic performance of the confined single atoms, and in other cases the confined single atoms can in turn affect the intrinsic activity of two-dimensional materials. Three typical two-dimensional materials are mainly involved here, i.e., graphene, g-C₃N₄, and MoS₂, and the confined single atoms include both metal and nonmetal atoms. First, we systematically introduce and discuss the classic synthesis methods, advanced characterization techniques, and various catalytic applications toward two-dimensional materials confining single-atom catalysts. Finally, the opportunities and challenges in this emerging field are featured on the basis of its current development.

Three-Dimensional Graphene Foams: Synthesis, Properties, Biocompatibility, Biodegradability, and Applications in Tissue Engineering

Presently, clinical nanomedicine and nanobiotechnology have impressively demanded the generation of new organic/inorganic analogues of graphene (as one of the intriguing biomedical research targets) for stem-cell-based tissue engineering. Among different shapes of graphene, three-dimensional (3D) graphene foams (GFs) are highly promising candidates to provide conditions for mimicking in vivo environments, affording effective cell attachment, proliferation,and differentiation due to their unique properties. These include the highest biocompatibility among nanostructures, high surface-to-volume ratio, 3D porous structure (to provide a homogeneous/isotropic growth of tissues), highly favorable mechanical characteristics, and rapid mass and electron transport kinetics (which are required for chemical/physical stimulation of differentiated cells). This review aims to describe recent and rapid advances in the fabrication of 3D GFs, together with their use in tissue engineering and regenerative nanomedicine applications. Moreover, we have summarized a broad range of recent studies about the behaviors, biocompatibility/toxicity,and biodegradability of these materials, both in vitro and in vivo. Finally, the highlights and challenges of these 3D porous structures, compared to the current polymeric scaffold competitors, are discussed.