Ligand-Assisted Co-Assembly Approach toward Mesoporous Hybrid Catalysts of Transition-Metal Oxides and Noble Metals: Photochemical Water Splitting

Noble-Metal Nanoparticle-Embedded Silicon Nanogratings via Single-Step Laser-Induced Periodic Surface Structuring

Here, we show that direct femtosecond laser nanostructuring of monocrystalline Si wafers in aqueous solutions containing noble-metal precursors (such as palladium dichloride, potassium hexachloroplatinate, and silver nitrate) allows for the creation of nanogratings decorated with mono- (Pd, Pt, and Ag) and bimetallic (Pd-Pt) nanoparticles (NPs). Multi-pulse femtosecond-laser exposure was found to drive periodically modulated ablation of the Si surface, while simultaneous thermal-induced reduction of the metal-containing acids and salts causes local surface morphology decoration with functional noble metal NPs. The orientation of the formed Si nanogratings with their nano-trenches decorated with noble-metal NPs can be controlled by the polarization direction of the incident laser beam, which was justified, for both linearly polarized Gaussian and radially (azimuthally) polarized vector beams. The produced hybrid NP-decorated Si nanogratings with a radially varying nano-trench orientation demonstrated anisotropic antireflection performance, as well as photocatalytic activity, probed by SERS tracing of the paraaminothiophenol-to-dimercaptoazobenzene transformation. The developed single-step maskless procedure of liquid-phase Si surface nanostructuring that proceeds simultaneously with the localized reduction of noble-metal precursors allows for the formation of hybrid Si nanogratings with controllable amounts of mono- and bimetallic NPs, paving the way toward applications in heterogeneous catalysis, optical detection, light harvesting, and sensing.

Noble-Metal-Based Hollow Mesoporous Nanoparticles: Synthesis Strategies and Applications

As second-generation mesoporous materials, mesoporous noble metals (NMs) are of significant interest for their wide applications in catalysis, sensing, bioimaging, and biotherapy owing to their structural and metallic features. The introduction of interior hollow cavity into NM-based mesoporous nanoparticles (MNs), which subtly integrate hierarchical hollow and mesoporous structure into one nanoparticle, produces a new type of hollow MNs (HMNs). Benefiting from their higher active surface, better electron/mass transfer, optimum electronic structure, and nanoconfinement space, NM-based HMNs exhibit their high efficiency in enhancing catalytic activity and stability and tuning catalytic selectivity. In this review, recent progress in the design, synthesis, and catalytic applications of NM-based HMNs is summarized, including the findings of the groups. Five main strategies for synthesizing NM-based HMNs, namely silica-assisted surfactant-templated nucleation, surfactant-templated sequential nucleation, soft "dual"-template, Kirkendall effect in synergistic template, and galvanic-replacement-assisted surfactant template, are described in detail. In addition, the applications in ethanol oxidation electrocatalysis and hydrogenation reactions are discussed to highlight the high activity, enhanced stability, and optimal selectivity of NM-based HMNs in (electro)catalysis. Finally, the further outlook that may lead the directions of synthesis and applications of NM-based HMNs is prospected.

Anisotropic dual-plasmonic hetero-nanostructures with tunable plasmonic coupling effects

The influence of plasmonic coupling effects between different components in Au NRs@Cu_2-x Se nanostructures on their characteristics was studied. To this aim, anisotropic Au@Cu_2-x Se hetero-nanostructures with well-controlled design and optical properties were obtained. The LSPR bands of gold and copper selenide are superpositioned in the NIR region, resulting in superior photocatalytic properties of the nanostructures.

Experimental characterization techniques for plasmon-assisted chemistry

Plasmon-assisted chemistry is the result of a complex interplay between electromagnetic near fields, heat and charge transfer on the nanoscale. The disentanglement of their roles is non-trivial. Therefore, a thorough knowledge of the chemical, structural and spectral properties of the plasmonic/molecular system being used is required. Specific techniques are needed to fully characterize optical near fields, temperature and hot carriers with spatial, energetic and/or temporal resolution. The timescales for all relevant physical and chemical processes can range from a few femtoseconds to milliseconds, which necessitates the use of time-resolved techniques for monitoring the underlying dynamics. In this Review, we focus on experimental techniques to tackle these challenges. We further outline the difficulties when going from the ensemble level to single-particle measurements. Finally, a thorough understanding of plasmon-assisted chemistry also requires a substantial joint experimental and theoretical effort.

Soft-template-assisted synthesis: a promising approach for the fabrication of transition metal oxides

The past few decades have witnessed transition metal oxides (TMOs) as promising candidates for a plethora of applications in numerous fields. The exceptional properties retained by these materials have rendered them of paramount emphasis as functional materials. Thus, the controlled and scalable synthesis of transition metal oxides with desired properties has received enormous attention. Out of different top-down and bottom-up approaches, template-assisted synthesis predominates as an adept approach for the facile synthesis of transition metal oxides, owing to its phenomenal ability for morphological and physicochemical tuning. This review presents a comprehensive examination of the recent advances in the soft-template-assisted synthesis of TMOs, focusing on the morphological and physicochemical tuning aided by different soft-templates. The promising applications of TMOs are explained in detail, emphasizing those with excellent performances.

Highly Crystalline Mesoporous Titania Loaded with Monodispersed Gold Nanoparticles: Controllable Metal-Support Interaction in Porous Materials

We report the syntheses of mesoporous Au/TiO₂ hybrid photocatalysts with ordered and crystalline frameworks using co-assembly of organosilane-containing colloidal amphiphile micelles (CAMs) and poly(ethylene oxide)-modified gold nanoparticles (AuNPs) as templates. The assembled CAMs can convert to inorganic silica during calcination at elevated temperatures, providing extraordinary thermal stability to preserve the porosity of TiO₂ and the nanostructures of AuNPs. Well-defined AuNPs supported within mesoporous TiO₂ (Au@mTiO₂) can be prepared using thermal annealing at temperatures up to 800 °C. High-temperature treatment (≥500 °C) under air is found to not only improve the crystallinity of TiO₂ but also induce oxidative strong metal-support interactions (SMSIs) at Au/TiO₂ interfaces. For oxidative SMSIs, the surface oxidation of AuNPs can generate positively charged Au^δ+ species, while TiO₂ gets reduced simultaneously. Using photocatalytic oxidation of benzyl alcohol as a model reaction, Au@mTiO₂ calcined at 600 °C for 12 h exhibited the best activity under UV irradiation, while Au@mTiO₂ calcined at 600 °C for 2 h showed the best activity under visible light. The delicate balance between the crystallinity and porosity of TiO₂ and the SMSIs at Au-TiO₂ interfaces is found to impact the photocatalytic activity of these hybrid materials.

Recent advances in amphiphilic block copolymer templated mesoporous metal-based materials: assembly engineering and applications

Mesoporous metal-based materials (MMBMs) have received unprecedented attention in catalysis, sensing, and energy storage and conversion owing to their unique electronic structures, uniform mesopore size and high specific surface area. In the last decade, great progress has been made in the design and application of MMBMs; in particular, many novel assembly engineering methods and strategies based on amphiphilic block copolymers as structure-directing agents have also been developed for the "bottom-up" construction of a variety of MMBMs. Development of MMBMs is therefore of significant importance from both academic and practical points of view. In this review, we provide a systematic elaboration of the molecular assembly methods and strategies for MMBMs, such as tuning the driving force between amphiphilic block copolymers and various precursors (i.e., metal salts, nanoparticles/clusters and polyoxometalates) for pore characteristics and physicochemical properties. The structure-performance relationship of MMBMs (e.g., pore size, surface area, crystallinity and crystal structure) based on various spectroscopy analysis techniques and density functional theory (DFT) calculation is discussed and the influence of the surface/interfacial properties of MMBMs (e.g., active surfaces, heterojunctions, binding sites and acid-base properties) in various applications is also included. The prospect of accurately designing functional mesoporous materials and future research directions in the field of MMBMs is pointed out in this review, and it will open a new avenue for the inorganic-organic assembly in various fields.

Self-assembly of block copolymers towards mesoporous materials for energy storage and conversion systems

This paper reviews the progress in the field of block copolymer-templated mesoporous materials, including synthetic methods, morphological and pore size control and their potential applications in energy storage and conversion devices.

A General and Straightforward Route to Noble Metal-Decorated Mesoporous Transition-Metal Oxides with Enhanced Gas Sensing Performance

Controllable and efficient synthesis of noble metal/transition-metal oxide (TMO) composites with tailored nanostructures and precise components is essential for their application. Herein, a general mercaptosilane-assisted one-pot coassembly approach is developed to synthesize ordered mesoporous TMOs with agglomerated-free noble metal nanoparticles, including Au/WO₃ , Au/TiO₂ , Au/NbO_x , and Pt/WO₃ . 3-mercaptopropyl trimethoxysilane is applied as a bridge agent to cohydrolyze with metal oxide precursors by alkoxysilane moieties and interact with the noble metal source (e.g., HAuCl₄ and H₂ PtCl₄ ) by mercapto (SH) groups, resulting in coassembly with poly(ethylene oxide)-b-polystyrene. The noble metal decorated TMO materials exhibit highly ordered mesoporous structure, large pore size (≈14-20 nm), high specific surface area (61-138 m² g^-1 ), and highly dispersed noble metal (e.g., Au and Pt) nanoparticles. In the system of Au/WO₃ , in situ generated SiO₂ incorporation not only enhances their thermal stability but also induces the formation of ε-phase WO₃ promoting gas sensing performance. Owning to its specific compositions and structure, the gas sensor based on Au/WO₃ materials possess enhanced ethanol sensing performance with a good response (R_air /R_gas = 36-50 ppm of ethanol), high selectivity, and excellent low-concentration detection capability (down to 50 ppb) at low working temperature (200 °C).

Low Power Single Laser Activated Synergistic Cancer Phototherapy Using Photosensitizer Functionalized Dual Plasmonic Photothermal Nanoagents

Combination therapy, especially photodynamic/photothermal therapy (PDT/PTT), has shown promising applications in cancer therapy. However, sequential irradiation by two different laser sources and even the utilization of single high-power laser to induce either combined PDT/PTT or individual PTT will be subjected to prolonged treatment time, complicated treatment process, and potential skin burns. Thus, low power single laser activatable combined PDT/PTT is still a formidable challenge. Herein, we propose an effective strategy to achieve synergistic cancer phototherapy under low power single laser irradiation for short duration. By taking advantage of dual plasmonic PTT nanoagents (AuNRs/MoS₂), a significant increase in temperature up to 60 °C with an overall photothermal conversion efficiency (PCE) of 68.8% was achieved within 5 min under very low power (0.2 W/cm²) NIR laser irradiation. The enhanced PCE and PTT performance is attributed to the synergistic plasmonic PTT effect (PPTT) of dual plasmonic nanoagents, promoting simultaneous release (85%) of electrostatically bonded indocyanine green (ICG) to induce PDT effects, offering simultaneous PDT/synergistic PPTT. Both in vitro and in vivo investigations reveal complete cell/tumor eradication, implying that simultaneous PDT/synergistic PPTT effects induced by AuNRs/MoS₂-ICG are much superior over individual PDT or synergistic PPTT. Notably, synergistic PPTT induced by dual plasmonic nanoagents also demonstrates higher in vivo antitumor efficacy than either individual PDT or PTT agents. Taken together, under single laser activation with low power density, the proposed strategy of simultaneous PDT/synergistic PPTT effectively reduces the treatment time, achieves high therapeutic index, and offers safe treatment option, which may serve as a platform to develop safer and clinically translatable approaches for accelerating cancer therapeutics.

Templated Growth of Crystalline Mesoporous Materials: From Soft/Hard Templates to Colloidal Templates

Mesoporous non-siliceous materials, in particular mesoporous transition metal oxides (m-TMOs), are of interest due to their fascinating electronic, redox, and magnetic properties for a wide range of applications in catalysis and energy storage. Control of the porosity (e.g., pore size, wall thickness, and surface area) and the crystalline degree (e.g., phase composition, crystallinity, and crystal grain size) of m-TMOs are critical for those applications. To crystallize TMOs, high temperature annealing is often needed to remove the amorphous defects and/or tune the compositions of different crystalline phases. This has brought many challenges to surfactant or block copolymer templates used in the process of evaporation-induced-self-assembly to prepare m-TMOs. In this review, we summarize the most recent achievements including the findings in our own laboratory on the use of organosilicate-containing colloids for the templated growth of mesoporous materials. We review a few key examples of preparing crystalline mesoporous oxides using different templating methods. The colloidal templating method by which mesoporous nanostructures can be stabilized up to 1,000°C is highlighted. The applications of m-TMOs and meso metal-oxide hybrids synthesized using organosilicate-containing colloidal templates in photocatalysis and high-temperature catalysis are also discussed.

A facile synthetic strategy for the creation of hollow noble metal/transition metal oxide nanocomposites

We have reported an efficient synthetic protocol to build different hollow hybrid nanocomposites with tunable compositions, such as Au/TiO2, Pt/ZrO2, and Au/CexTi1-xO2. The noble metal nanoparticles were well encapsulated in a wall composed of the designated transition metal oxides, showing promising potential as stable catalysts as demonstrated by Pt/ZrO2 for methane combustion.

Size-dependent synthesis and catalytic activities of trimetallic PdAgCu mesoporous nanospheres in ethanol electrooxidation

Mesoporous noble metal nanocrystals have exhibited significant potential in electrocatalysis. However, it remains a big challenge to controllably synthesize sub-100 nm multimetallic mesoporous nanospheres (MNSs) with precisely tunable sizes and to further understand their size-dependent electrocatalytic performances. In this manuscript, a one-pot solution-phase strategy was developed for the formation of nanosized trimetallic PdAgCu MNSs with cylindrically open mesoporous nanochannels and continuous frameworks. The resultant Pd-based MNSs were precisely tailorable not only in terms of size (from 21 to 104 nm), but also in terms of elemental ratios and compositions (PdAgCu, PdAgPt, PdAgFe, PdPtCu, and PdCuRu). This system thus provided a facile yet straightforward means to evaluate the size effect of trimetallic MNSs in electrocatalysis. As an example, trimetallic PdAgCu MNSs with an average size of 36 nm exhibited the best activity of 4.64 A mg_Pd ^-1 in the electrocatalytic ethanol oxidation reaction, 1.1-1.7 fold higher than that of MNSs with smaller or larger sizes and 5.9 fold higher than that of commercial Pd black catalyst. By means of kinetic studies, the size-dependent electrocatalytic performance can be ascribed to the optimization and balance between electron transfer and mass transfer processes inside PdAgCu MNSs. We expect that the size effect of multimetallic MNS nanocatalysts presented here may provide a general synthetic methodology for rational design of size-dependent nanocatalysts for a broad range of applications.

Encapsulation of Metal Nanoparticle Catalysts Within Mesoporous Zeolites and Their Enhanced Catalytic Performances: A Review

Metal nanoparticles (NPs) exhibit desired activities in various catalytic reactions. However, the aggregation and sintering of metal NPs usually cause the loss of catalytic performance in practical reaction processes. Encapsulation of catalytically active metal NPs on/within a high-surface-area inorganic support partially resolve such concerns. Microporous zeolites, owing to their rigid frameworks and porous structural features, have been considered as one of ideal inorganic supports. Metal NPs can be easily encapsulated and stabilized within zeolitic frameworks to prevent unwished aggregation during the catalysis. Unfortunately, sole microporous nanochannels (generally <1 nm) in conventional zeolites are not easy to be accessed. The introduction of another set of nanochannel (e.g., mesopore), known as mesoporous zeolites, can greatly improve the mass-transfer efficiency, which is structurally beneficial for most catalytic reactions. The coexistence of micropores and mesopores in inorganic supports provides the synergetic advantages of both fine confinement effect for metal NPs and easy diffusion for organic reactants/intermediates/products. This review focuses on the recent advances in the design and synthesis of mesoporous zeolites-encapsulated metal NP catalysts as well as their desired catalytic performances (activity and stability) in organic reactions. We first discuss the advantages of mesoporous zeolites as the supports and present general strategies for the construction of mesoporous zeolites. Then, the preparation methods on how to encapsulate NP catalysts within both microporous and mesoporous zeolites are clearly demonstrated. Third, some recent important cases on catalytic applications are presented to verify structural advantages of mesoporous zeolite supports. Within the conclusion, the perspectives on future developments in metal NP catalysts encapsulated within mesoporous zeolites are lastly discussed.

Quasi-single-crystalline CoO hexagrams with abundant defects for highly efficient electrocatalytic water oxidation

Defects and structural long-range ordering have been recognized as two crucial characters for advanced electrocatalysts. However, these two features have rarely been achieved together. Herein, we report the preparation of single-crystalline CoO hexagrams and demonstrate their exceptional electrocatalytic properties for water oxidation. The quasi-single-crystalline CoO hexagrams, prepared at the critical phase transition point of β-Co(OH)2/Co(OH)F hexagrams, possess both abundant oxygen vacancies as defects and structural long-range ordering. The matching between the b-axis of Co(OH)F crystals and the a-axis of β-Co(OH)2 crystals is critical for the formation of the CoO hexagram single crystals. The quasi-single-crystalline CoO hexagrams with abundant defects are highly efficient for water oxidation by delivering a 10 mA cm-2 current density at a low overpotential of 269 mV in a 1 M KOH aqueous solution.

Engineering Gold Nanorod-Copper Sulfide Heterostructures with Enhanced Photothermal Conversion Efficiency and Photostability

Plasmonic gold nanorods (Au NRs)-copper sulfide heterostructures have recently attracted much attention owing to the synergistically enhanced photothermal properties. However, the facile synthesis and interface tailoring of Au NRs-copper sulfide heterostructures remain a formidable challenge. In this study, the rational design and synthesis of Au NRs-Cu₇ S₄ heterostructures via a one-pot hydrothermal process is reported. Specifically, core-shell and dumbbell-like Au NRs-Cu₇ S₄ heterostructures are obtained with well-controlled interfaces by employing the Au NRs with different aspect ratios. Both core-shell and dumbbell-like Au NRs-Cu₇ S₄ have proven effective as photothermal therapy agents, which offer both high photothermal stability and significant photothermal conversion efficiency up to 62%. The finite-difference time domain simulation results confirm the coupling effect that leads to the enhanced local field as well as the optical absorption at the heterostructure interface. Importantly, these Au NRs-Cu₇ S₄ heterostructures can be compatibly used as an 808 nm laser-driven photothermal therapy agents for the efficient photothermal therapy of cancer cells in vitro. This study will provide new insight into the design of other noble metal-semiconductor heterostructures for a broad range of applications utilizing surface plasmon resonance enhancement phenomena.

Self-Templated Fabrication of MoNi4 /MoO3-x Nanorod Arrays with Dual Active Components for Highly Efficient Hydrogen Evolution

A binder-free efficient MoNi₄ /MoO_3-x nanorod array electrode with 3D open structure is developed by using Ni foam as both scaffold and Ni source to form NiMoO₄ precursor, followed by subsequent annealing in a reduction atmosphere. It is discovered that the self-templated conversion of NiMoO₄ into MoNi₄ nanocrystals and MoO_3-x as dual active components dramatically boosts the hydrogen evolution reaction (HER) performance. Benefiting from high intrinsic activity, high electrochemical surface area, 3D open network, and improved electron transport, the resulting MoNi₄ /MoO_3-x electrode exhibits a remarkable HER activity with extremely low overpotentials of 17 mV at 10 mA cm^-2 and 114 mV at 500 mA cm^-2 , as well as a superior durability in alkaline medium. The water-alkali electrolyzer using MoNi₄ /MoO_3-x as cathode achieves stable overall water splitting with a small cell voltage of 1.6 V at 30 mA cm^-2 . These findings may inspire the exploration of cost-effective and efficient electrodes by in situ integrating multiple highly active components on 3D platform with open conductive network for practical hydrogen production.

Nanoengineering of aggregation-free and thermally-stable gold nanoparticles in mesoporous frameworks

Loading catalytically active, aggregation-free and thermally stable metal nanoparticles (NPs) on a high surface area support represents a major interest in heterogeneous catalysis. Current synthetic approaches to these hybrid catalysts, however, still lack controllability in the thermal stability of metal NPs, particularly at high temperatures in the absence of organic ligands. We herein report a facile "co-assembly" methodology to prepare aggregation-free, ligand-free and thermally stable mesoporous hybrid nanocatalysts of metal-oxides and metal-carbons. Immobilization of catalytically active gold NPs (AuNPs) within high surface area mesoporous frameworks was achieved via the polymer-directed co-assembly of chemically and structurally equivalent Pluronic P-123 and poly(ethylene oxide)-modified metallic gold NPs (AuNP-PEO) as co-structure-directing-agents. The in situ immobilization of AuNPs partially embedded into periodically ordered mesoporous frameworks imposed a three-dimensional "nanoconfinement" effect and essentially enhanced the long-term thermal stability of AuNPs up to 800 °C. The mesoporous hybrids retained a high surface accessibility of AuNPs and they had a fantastic high-temperature catalytic durability (>130 h at 375 °C) confirmed by two model catalytic reactions, including aerobic oxidation of benzyl alcohol and CO oxidation, respectively. Our results may offer a new realm of possibilities for the rational applications of thermally stable nanocatalysts in renewable energy technology and high-temperature catalysis.

Surface Engineering of Spherical Metal Nanoparticles with Polymers toward Selective Asymmetric Synthesis of Nanobowls and Janus-Type Dimers

New synthetic methods capable of controlling structural and compositional complexities of asymmetric nanoparticles (NPs) are very challenging but highly desired. A simple and general synthetic approach to designing sophisticated asymmetric NPs by anisotropically patterning the surface of isotropic metallic NPs with amphiphilic block copolymers (BCPs) is reported. The selective galvanic replacement and seed-mediated growth of a second metal can be achieved on the exposed surface of metal NPs, resulting in the formation of nanobowls and Janus-type metal-metal dimers, respectively. Using Ag and Au NPs tethered with amphiphilic block copolymers of poly(ethylene oxide)-block-polystyrene (PEO-b-PS), anisotropic surface patterning of metallic NPs (e.g., Ag and Au) is shown to be driven by thermodynamical phase segregation of BCP ligands on isotropic metal NPs. Two proof-of-concept experiments are given on, i) synthesis of Au nanobowls by a selective galvanic replacement reaction on Janus-type patched Ag/polymer NPs; and ii) preparation of Au-Pd heterodimers and Au-Au homodimers by a seed-mediated growth on Janus-type patched Au/polymer NPs. The method shows remarkable versatility; and it can be easily handled in aqueous solution. This synthetic strategy stands out as the new methodology to design and synthesis asymmetric metal NPs with sophisticated topologies.

Ultrafine Co-based Nanoparticle@Mesoporous Carbon Nanospheres toward High-Performance Supercapacitors

A general synthetic methodology is reported to grow ultrafine cobalt-based nanoparticles (NPs, 2-7 nm) within high-surface-area mesoporous carbon (MC) frameworks. Our design strategy is based on colloidal amphiphile (CAM) templated oxidative self-polymerization of dopamine. The CAM templates consisting of a hydrophobic silica-like core and a hydrophilic PEO shell can coassemble with dopamine and template its self-polymerization to form polydopamine (PDA) nanospheres. Given that PDA has rich binding sites such as catechol and amine to coordinate metal ions (e.g., Co²⁺), PDA nanospheres containing Co²⁺ ions can be converted into hierarchical porous carbon frameworks containing ultrafine metallic Co NPs (Co@MC) using high-temperature pyrolysis. The CAM templates offer strong "nanoconfinements" to prevent the overgrowth of Co NPs within carbon frameworks. The yielded ultrafine Co NPs have an average size of <7 nm even at a very high loading of 65 wt %. Co@MC can be further converted into various oxides and sulfides, e.g., CoO, Co₃O₄, CoS₂ and transition-metal doped bimetallic Co_xM_1-xS₂, without significantly changing the size of NPs. As a proof-of-concept application, the porous Co-based NPs@MC hybrids were used as electrode materials for supercapacitors, which exhibit excellent supercapacitive performance with outstanding long-term cycling stability, due to the features such as ultrafine size, controllable chemical compositions, hierarchical porous structures, and full coverage of conductive carbons.

Observation of enhanced photocurrent response in M–CuInS2 (M = Au, Ag) heteronanostructures: phase selective synthesis and application

We demonstrate the phase selective synthesis of M–CuInS₂ (M = Au and Ag) heteronanostructures and their enhanced photocurrent activity compared to that of pure CuInS₂.

From 1D to 3D - macroscopic nanowire aerogel monoliths

Here we present a strategy to assemble one-dimensional nanostructures into a three-dimensional architecture with macroscopic size. With the assistance of centrifugation, we successfully gel ultrathin W18O49 nanowires with diameters of 1 to 2 nm and aspect ratios larger than 100 into 3D networks, which are transformed into monolithic aerogels by supercritical drying.

A facile synthesis of Fe3C@mesoporous carbon nitride nanospheres with superior electrocatalytic activity

We report a colloidal amphiphile-templating approach to preparing nanosized Fe3C encapsulated within mesoporous nitrogen-doped carbon nanospheres (Fe3C@mCN). The obtained Fe3C@mCN hybrids having a high surface area and ultrafine Fe3C nanocrystals exhibited superior activity and durability for oxygen reduction.

Novel hollow and yolk–shell structured periodic mesoporous polymer nanoparticles

Novel hollow and yolk–shell structured periodic mesoporous polymer nanoparticles were prepared by the development of an efficient reactive interface-guided co-assembly approach.

Synthesis of Ordered Mesoporous CuO/CeO₂ Composite Frameworks as Anode Catalysts for Water Oxidation

Cerium-rich metal oxide materials have recently emerged as promising candidates for the photocatalytic oxygen evolution reaction (OER). In this article, we report the synthesis of ordered mesoporous CuO/CeO₂ composite frameworks with different contents of copper(II) oxide and demonstrate their activity for photocatalytic O₂ production via UV-Vis light-driven oxidation of water. Mesoporous CuO/CeO₂ materials have been successfully prepared by a nanocasting route, using mesoporous silica as a rigid template. X-ray diffraction, electron transmission microscopy and N₂ porosimetry characterization of the as-prepared products reveal a mesoporous structure composed of parallel arranged nanorods, with a large surface area and a narrow pore size distribution. The molecular structure and optical properties of the composite materials were investigated with Raman and UV-Vis/NIR diffuse reflectance spectroscopy. Catalytic results indicated that incorporation of CuO clusters in the CeO₂ lattice improved the photochemical properties. As a result, the CuO/CeO₂ composite catalyst containing ~38 wt % CuO reaches a high O₂ evolution rate of ~19.6 µmol·h-1 (or 392 µmol·h-1·g-1) with an apparent quantum efficiency of 17.6% at λ = 365 ± 10 nm. This OER activity compares favorably with that obtained from the non-porous CuO/CeO₂ counterpart (~1.3 µmol·h-1) and pure mesoporous CeO₂ (~1 µmol·h-1).