Ultrasimple size encoded microfluidic chip for rapid simultaneous multiplex detection of DNA sequences

Simultaneous multiplexed analysis can provide comprehensive information for disease diagnosis. However, the current multiplex methods rely on sophisticated barcode technology, which hinders its wider application. In this study, an ultrasimple size encoding method is proposed for multiplex detection using a wedge-shaped microfluidic chip. Driving by negative pressure, microparticles are naturally arranged in distinct stripes based on their sizes within the chip. This size encoding method demonstrates a high level of precision, allowing for accuracy in distinguishing 3-5 sizes of microparticles with a remarkable accuracy rate of up to 99%, even the microparticles with a size difference as small as 0.5 μm. The entire size encoding process is completed in less than 5 min, making it ultrasimple, reliable, and easy to operate. To evaluate the function of this size encoding microfluidic chip, three commonly co-infectious viruses' nucleic acid sequences (including complementary DNA sequences of HIV and HCV, and DNA sequence of HBV) are employed for multiplex detection. Results indicate that all three DNA sequences can be sensitively detected without any cross-interference. This size-encoding microfluidic chip-based multiplex detection method is simple, rapid, and high-resolution, its successful application in serum samples renders it highly promising for potential clinical promotion.

Imprinted Polymers on the Route to Plastibodies for Biomacromolecules (MIPs), Viruses (VIPs), and Cells (CIPs)

Around 30% of the scientific papers published on imprinted polymers describe the recognition of proteins, nucleic acids, viruses, and cells. The straightforward synthesis from only one up to six functional monomers and the simple integration into a sensor are significant advantages as compared with enzymes or antibodies. Furthermore, they can be synthesized against toxic substances and structures of low immunogenicity and allow multi-analyte measurements via multi-template synthesis. The affinity is sufficiently high for protein biomarkers, DNA, viruses, and cells. However, the cross-reactivity of highly abundant proteins is still a challenge.

Research progress of sensors based on molecularly imprinted polymers in analytical and biomedical analysis

Molecularly imprinted polymers (MIPs) have had tremendous impact on biomimetic recognition due to their precise specificity and high affinity comparable to that of antibodies, which has shown the great advantages of easy preparation, good stability and low cost. The combination of MIPs with other analytical technologies can not only achieve rapid extraction and sensitive detection of target compounds, improving the level of analysis, but also achieve precise targeted delivery, in-vivo imaging and other applications. Among them, the recognition mechanism plays a vital role in chemical and biological sensing, while the improvement of the recognition element, such as the addition of new nanomaterials, can greatly improve the analytical performance of the sensor, especially in terms of selectivity. Currently, due to the need for rapid diagnosis and improved sensing properties (such as selectivity, stability, and cost-effectiveness), researchers are investigating new recognition elements and their combinations to improve the recognition capabilities of chemical sensing and bio-sensing. Therefore, this review mainly discusses the design strategies of optical sensors, electrochemical sensors and photoelectric sensors with molecular imprinting technology and their applications in environmental systems, food fields, drug detection and biology including bacteria and viruses.

Hierarchically Structured Molecularly Imprinted Nanotransducers for Truncated HER2-Targeted Photodynamic Therapy of Therapeutic Antibody-Resistant Breast Cancer

Antibodies have been a mainstream class of therapeutics for clinical treatment of various diseases, especially cancers. However, mutation in cancer cells leads to resistance to therapeutic antibodies, hyperactivity of proliferation of cancer cells, and difficulty in the development of therapeutic antibodies. Herein, we present a strategy termed molecularly imprinted nanotransducer (MINT) for targeted photodynamic therapy (PDT) of mutated cancers. The MINT is a rationally engineered nanocomposite featuring a core of an upconversion nanoparticle, a shell of a thin layer of molecularly imprinted polymer, and a photosensitizer modified on the surface. As a proof-of-principle, truncated HER2 (P95HER2) overexpressed breast cancer, a challenging cancer lacking effective targeted therapeutics, was used as the cancer model. The designed structure, properties, functions, and anticancer efficacy of MINT were systematically investigated and experimentally confirmed. The MINT could not only specifically target P95HER2+ cancer cells in vitro and in vivo but also efficiently transfer the irradiated light and generate excited-state oxygen, resulting in efficient targeted cancer killing. Therefore, the MINT strategy provides a promising therapeutic for targeted PDT of drug-resistant cancers caused by target mutation.

A highly efficient molecularly imprinted fluorescence sensor for assessing whole wheat grains by the rapid and sensitive detection of alkylresorcinols

To differentiate whole wheat foods from refined wheat foods is still challenging grain industry and confusing consumers. Alkylresorcinols (ARs), as biomarkers of whole wheat grains, can serve for assessing the authenticity of whole wheat foods. Herein, a highly efficient fluorescence sensing platform (CDs@MIP) for rapid and sensitive analysis of ARs was explored, using carbon dots (CDs) as fluorophores and 5-heneicosylresorcinol (C21:0 AR) as template molecules embedded in a molecularly imprinted polymer (MIP) coating. Benefiting from the specific cavities in the probe and a photo-induced electron transfer effect, the fluorescence intensity of CDs@MIP was significantly quenched in the presence of C21:0 AR, exhibiting a superior binding efficiency and selectivity. As a result, the fabricated optical sensor delivered a wide linear range of C21:0 AR from 0.015 to 60 μg mL-1 with an ultralow detection limit of 4 ng mL-1. It was noteworthy that the sensor was successfully applied for the rapid detection of C21:0 AR in commercial whole-wheat foods as well as visualization analysis on the test paper, comprehensively validating the practicality and efficacy of CDs@MIP based fluorescence assay. The study provides a rapid and sensitive detection method of C21:0 AR, paving a new way for guiding grain industry to effectively qualify the authenticity and to quantify the content of whole wheat in wheat-based foods.

Molecularly Imprinted Nanomaterials with Stimuli Responsiveness for Applications in Biomedicine

The review aims to summarize recent reports of stimuli-responsive nanomaterials based on molecularly imprinted polymers (MIPs) and discuss their applications in biomedicine. In the past few decades, MIPs have been proven to show widespread applications as new molecular recognition materials. The development of stimuli-responsive nanomaterials has successfully endowed MIPs with not only affinity properties comparable to those of natural antibodies but also the ability to respond to external stimuli (stimuli-responsive MIPs). In this review, we will discuss the synthesis of MIPs, the classification of stimuli-responsive MIP nanomaterials (MIP-NMs), their dynamic mechanisms, and their applications in biomedicine, including bioanalysis and diagnosis, biological imaging, drug delivery, disease intervention, and others. This review mainly focuses on studies of smart MIP-NMs with biomedical perspectives after 2015. We believe that this review will be helpful for the further exploration of stimuli-responsive MIP-NMs and contribute to expanding their practical applications especially in biomedicine in the near future.

Preparation and properties of boron affinity molecularly imprinted mesoporous polymers based on Mn-doped ZnS quantum dots

Sialic acid (SA), known as N-acetyl neuraminic acid, is a natural 9-carbomonosaccharide derivative. SA has been widely applied in the early diagnosis of diseases as therapeutic target. However, the abundance of SA is very low in biological samples, which is usually interfered by the similar molecules coexisting at high abundance. Combining the advantages of high selectivity and specificity of molecularly imprinted technology, high specific surface area of mesoporous materials and excellent optical properties of quantum dots, we chose Mn-doped ZnS quantum dots as signal elements, and sialic acid as the template molecule. KH-4-MAPB with recognition ability to SA was synthesized by one-step hydrothermal method using thiolene click reaction as functional monomer. Based on the principle of boron affinity, molecularly imprinted polymers with highly ordered mesoporous structure were prepared, and the structure and fluorescence properties of fluorescent molecularly imprinted polymers were studied. FT-IR, XRD, TEM and nitrogen adsorption-desorption experiments were used to characterize the structure and morphology of the molecularly imprinted polymers. The results showed that the prepared molecularly imprinted polymers had highly ordered mesoporous structure and a large number of imprinted holes, which ensured the specific selectivity of the molecularly imprinted polymers. The fluorescence properties of MIMPs were characterized and analyzed by fluorescence spectra, equilibrium adsorption kinetics experiments were conducted and imprinting properties were recorded under different pH. The above experimental results showed that the fluorescence quenching was successfully achieved when the template molecule SA was captured by the molecularly imprinted polymer. When the concentration of SA was 1.25-100 × 10^-2 g/L, the fluorescence quenching degree of MIMPs showed a fine linear relationship with SA. The correlation coefficient was 0.9946, and the detection equation was F₀/F - 1 = 0.0215 [CSA] + 0.0241. MIMPs had a high recognition ability for SA, and the imprinting factor was 2.44. As a fluorescent sensor for SA, the response time of MIMPs was 20 min. When the buffer solution pH was 7, the imprinting factor was the largest. Under the best conditions, MIMPs revealed good selectivity and specificity for the fluorescence recognition of SA. MIMPS were also applied to the analysis of SA in real human serum samples with satisfactory results.

Sialyl-Tn Antigen-Imprinted Dual Fluorescent Core-Shell Nanoparticles for Ratiometric Sialyl-Tn Antigen Detection and Dual-Color Labeling of Cancer Cells

Sialyl-Tn (STn or sialyl-Thomsen-nouveau) is a carbohydrate antigen expressed by more than 80% of human carcinomas. We here report a strategy for ratiometric STn detection and dual-color cancer cell labeling, particularly, by molecularly imprinted polymers (MIPs). Imprinting was based on spectroscopic studies of a urea-containing green-fluorescent monomer 1 and STn-Thr-Na (sodium salt of Neu5Acα2-6GalNAcα-O-Thr). A few-nanometer-thin green-fluorescent polymer shell, in which STn-Thr-Na was imprinted with 1, other comonomers, and a cross-linker, was synthesized from the surface of red-emissive carbon nanodot (R-CND)-doped silica nanoparticles, resulting in dual fluorescent STn-MIPs. Dual-color labeling of cancer cells was achieved since both red and green emissions were detected in two separate channels of the microscope and an improved accuracy was obtained in comparison with single-signal MIPs. The flow cytometric cell analysis showed that the binding of STn-MIPs was significantly higher (p < 0.001) than that of non-imprinted polymer (NIP) control particles within the same cell line, allowing to distinguish populations. Based on the modularity of the luminescent core-fluorescent MIP shell architecture, the concept can be transferred in a straightforward manner to other target analytes.

Ultrabright AIEdots with tunable narrow emission for multiplexed fluorescence imaging

AIEgen doped fluorescent nanodots (AIEdots) have attracted lots of attention, due to their superior characteristics as fluorescent probes, such as excellent photostability, large Stokes shift, high brightness and tunable emission. Unfortunately, most of the currently available AIEdots exhibit broad emission bandwidth, which limits their applications in multiplexed fluorescence imaging and detection. In this work, the strategy of designing and fabricating narrow emissive AIEdots (NE-AIEdots) with tunable wavelengths was presented by constructing a light-harvesting system with high energy transfer efficiency. Efficient intra-particle energy transfer from highly doped AIEgens, serving as the light-harvesting antenna, to the lightly doped narrow emissive fluorophore, resulted in high brightness and narrow emission. The emission band of NE-AIEdots with the full-width-at-half-maximum varied from 18 to 36 nm was 3-6.3 times narrower than that of traditional AIEdots. The single-particle brightness of NE-AIEdots was over 5-times that of commercial quantum dots under the same excitation and collection conditions. Taking advantage of the superior performance of these NE-AIEdots, multiplexed fluorescence imaging of lymph nodes in living mice was realized, which supported the future applications of NE-AIEdots for in vivo multiplexed labeling and clinical surgery.

[Advances in enrichment and separation of cis-diol-containing compounds by porous organic frameworks]

The design and synthesis of boronate affinity materials that show high efficiency, high selectivity, and high enrichment performance have gained significant attention. The principle of boronate affinity relies on the reversible covalent reactions, including the formation of stable five-membered or six-membered cyclic esters with cis-diol-containing compounds in alkaline aqueous media and dissociation of cyclic esters in an acidic surrounding to release cis-diol-containing compounds. Recently, various boronate affinity materials have been synthesized and utilized for selective enrichment of these compounds. Metal organic frameworks (MOFs) and covalent organic frameworks (COFs) have been widely used in chromatographic separation and sample pretreatment because of their adjustable pore size, high porosity, high specific surface area, tunable skeleton structure, and favorable chemical and thermal stability. To promote the enrichment selectivity of MOFs and COFs for cis-diol-containing compounds, boronic acid-functionalized MOFs and COFs with various structures and categories have been synthesized. This review summarizes more than 80 investigations into the categories, synthetic strategies, and applications of boronic acid-functionalized MOFs and COFs from the Science Citation Index. These synthesis methods include metal ligand-fragment co-assembly, post-synthetic modification, and bottom-up modification of boronic acid-functionalized porous materials. Although two modification strategies (post-synthetic and metal ligand-fragment co-assembly) have been introduced for the preparation of boronic acid-functionalized MOFs, the latter is more commonly adopted as it improves the enrichment selectivity and enrichment efficiency of MOFs. The common limitations of MOFs such as aggregation and aperture issues were also resolved. Boron affinity MOFs possessing favorable properties according to the characteristics of cis-diol-containing compounds, have also been synthesized. Furthermore, to facilitate enrichment and separation, many boronic acid-functionalized magnetic material MOFs have been developed for the enrichment and analysis of cis-diol-containing compounds. Additionally, the luminescent properties of Ln-MOFs have been used in combination with boronic acid affinity for the enrichment, separation, and subsequent detection of cis-diol-containing compounds. Post-synthetic modification and the bottom-up strategy are the primary methods for the preparation of boronic acid-functionalized COFs. Boronic acid-functionalized COFs are less investigated than boronic acid-functionalized MOFs, likely due to the greater complexity of COF synthesis. This work aims to summarize the research advances, synthesis ideas, and synthesis methods related to boric acid-functionalized porous organic frameworks, which will provide theoretical guidance and technical support for its applications while accelerating the commercialization of such organic frameworks.

Molecularly imprinted materials for glycan recognition and processing

Carbohydrates are the most abundant organic molecules on Earth and glycosylation is the most common posttranslational modification of proteins. Glycans are involved in a plethora of biological processes including cell adhesion, bacterial and viral infection, inflammation, and cancer development. Coincidently, glycosides were some of the earliest molecules imprinted and have been instrumental in the development of covalent molecular imprinting technology. This perspective illustrates recently developed molecularly imprinted materials for glycan binding and processing. Novel imprinting techniques and postmodification led to development of synthetic glycan-binding materials capable of competing with natural lectins in affinity and artificial glycosidases for selective hydrolysis of complex glycans. These materials are expected to significantly advance glycochemistry, glycobiology, and related areas such as biomass conversion.

Molecularly Imprinted Polymer-Coated Inorganic Nanoparticles: Fabrication and Biomedical Applications

Molecularly imprinted polymers (MIPs) continue to gain increasing attention as functional materials due to their unique characteristics such as higher stability, simple preparation, robustness, better binding capacity, and low cost. In particular, MIP-coated inorganic nanoparticles have emerged as a promising platform for various biomedical applications ranging from drug delivery to bioimaging. The integration of MIPs with inorganic nanomaterials such as silica (SiO₂), iron oxide (Fe₃O₄), gold (Au), silver (Ag), and quantum dots (QDs) combines several attributes from both components to yield highly multifunctional materials. These materials with a multicomponent hierarchical structure composed of an inorganic core and an imprinted polymer shell exhibit enhanced properties and new functionalities. This review aims to provide a general overview of key recent advances in the fabrication of MIPs-coated inorganic nanoparticles and highlight their biomedical applications, including drug delivery, biosensor, bioimaging, and bioseparation.

Recent advances and future perspectives on carbohydrate-based cancer vaccines and therapeutics

Carbohydrates are abundantly expressed on the surface of both eukaryotic and prokaryotic cells, often as post translational modifications of proteins. Glycoproteins are recognized by the immune system and can trigger both innate and humoral responses. This feature has been harnessed to generate vaccines against polysaccharide-encapsulated bacteria such as Streptococcus pneumoniae, Hemophilus influenzae type b and Neisseria meningitidis. In cancer, glycosylation plays a pivotal role in malignancy development and progression. Since glycans are specifically expressed on the surface of tumor cells, they have been targeted for the discovery of anticancer preventive and therapeutic treatments, such as vaccines and monoclonal antibodies. Despite the various efforts made over the last years, resulting in a series of clinical studies, attempts of vaccination with carbohydrate-based candidates have proven unsuccessful, primarily due to the immune tolerance often associated with these glycans. New strategies are thus deployed to enhance carbohydrate-based cancer vaccines. Moreover, lessons learned from glycan immunobiology paved the way to the development of new monoclonal antibodies specifically designed to recognize cancer-bound carbohydrates and induce tumor cell killing. Herein we provide an overview of the immunological principles behind the immune response towards glycans and glycoconjugates and the approaches exploited at both preclinical and clinical level to target cancer-associated glycans for the development of vaccines and therapeutic monoclonal antibodies. We also discuss gaps and opportunities to successfully advance glycan-directed cancer therapies, which could provide patients with innovative and effective treatments.

A molecularly imprinted antibiotic receptor on magnetic nanotubes for the detection and removal of environmental oxytetracycline

The detection and elimination of antibiotic contaminants, such as oxytetracycline (OTC), a broad-spectrum tetracycline antibiotic, would be of help in efficient environmental monitoring, agriculture and food safety tests. Nevertheless, currently available methodologies, which mostly rely on the chromatographic separation of OTC, suffer from low sensitivity and complicated processes. Thus, we report here on the design and synthesis of a fluorescent sensor based on molecularly imprinted magnetic halloysite nanotubes (referred to as MHNTs@FMIPs) for the effective detection and purification of OTC in actual environmental samples. The fluorescence of the MHNTs@FMIPs was quenched obviously upon loading with OTC, covering a linear concentration range of 10-300 nM with a limit of detection (LOD) as low as 8.1 nM. The imprinting factor is 4.47, indicating an excellent specificity. Furthermore, the MHNTs@FMIPs can be applied to the quantitative detection of OTC (5 cycles of 300 nM) in aquaculture wastewater and Yangtze River water, demonstrating their immense application potential.

Biomolecular Surface Functionalization and Stabilization Method to Fabricate Quantum Dots Nanobeads for Accurate Biosensing Detection

The surface functionalization of quantum dots (QDs) is essential for their application as a label material in a biological field. Here, a protein surface functionalization approach was introduced to combine with silica encapsulation for the sustainable and stable synthesis of QDs nanobeads for biomarker detection. The formation of QDs nanobeads was achieved by multiple mercapto groups in bovine serum albumin (BSA) macromolecules as multidentate ligands to replace hydrophobic ligands on the surface of QDs and decompression. The resulting QDs nanobeads exhibited 20 times more photoluminescence than the corresponding hydrophobic QDs and presented excellent stability under physiological conditions due to the protection of BSA and silica. The nanobeads served as a robust signal-generating reagent to construct the lateral flow immunoassay (LFIA) biosensor for the detection of glycosylated hemoglobin (HbA1c). The concentration of HbA1c was determined within 10 min with high specificity using only 60 μL of whole blood samples collected clinically. The nanobeads-based LFIA biosensor exhibited linear detection of HbA1c from 4.2% to 13.6%. The accuracy and stability of this approach in clinical utility was demonstrated by the detection of HbA1c after a long-term storage of test strips. This protein surface modification technology provides a new way for improving the biological properties of QDs in clinical diagnosis.

Molecular imprinting and cladding produces antibody mimics with significantly improved affinity and specificity

Molecularly imprinted polymers (MIPs), as important mimics of antibodies, are chemically synthesized by polymerization in the presence of a target compound. MIPs have found wide applications in important fileds. However, the current molecular imprinting technology suffers from a dilemma; there is often a compromise between the best affinity and the best specificity for MIPs prepared under optimized conditions. Herein, we proposed a new strategy called molecular imprinting and cladding (MIC) to solve this issue. The principle is straightforward; after molecular imprinting, a chemically inert cladding thinlayer is generated to precisely cover non-imprinted area. We further proposed a special MIC approach for controllably engineering protein binders. The prepared cladded MIPs (cMIPs) exhibited significantly improved affinity and specificity. The general applicability of the proposed strategy and method was verified by engineering of cMIPs for the recognition of a variety of different proteins. The feasibility of cMIPs for real applications was demonstrated by fluorescence imaging of cancer cells against normal cells and immunoassay of C-peptide in human urine. This study opened up a new avenue for controllably engineering protein-specific antibody mimics with excellent recognition properties, holding great prospective in important applications such as disease diagnosis and nanomedicine.

Construction of DNA ligase-mimicking nanozymes via molecular imprinting

Enzyme mimics are of significant importance due to their facile preparation, low cost and stability to rigorous environment. Molecularly imprinted polymers (MIPs) have been important synthetic mimics of enzymes. However,...

CdTe@CdS quantum dots for labeling and imaging of macrophages in liver frozen section below freezing point

CdTe@CdS core-shell quantum dots with different particle sizes are synthesized by aqueous method, and the coating of CdS shell layer improves the quantum yield (36%→59%) and fluorescence stability (37%→77%) of...

Molecularly Imprinted Polymer Hydrogel Nanoparticles: Synthetic Antibodies for Cancer Diagnosis and Therapy

Cancer is a leading cause of death worldwide and according to the World Health Organization (WHO) accounted for 10 million deaths in 2020. Promising theranostic (therapy and diagnostic) agents in the treatment of cancer are nanomaterials, which have come to the forefront because of their small size approaching those of protein complexes in the human body, and of their easy functionalization giving access to nanocomposite materials with diverse functions (fluorescence, magnetic, stimuli-responsiveness, etc.), and improved biocompatibility. Among them, affinity nanoparticles, often decorated with highly specific targeting ligands such as antibodies, aptamers, lectins and peptides, have enabled enhanced binding and exquisite recognition of biomarkers overexpressed in cancer cells. In this review, we describe an emerging class of targeting ligands, molecularly imprinted polymer hydrogel nanoparticles for their application in the early detection of disease, with the aim to improve diagnosis and treatment.

Controllable Engineering and Functionalizing of Nanoparticles for Targeting Specific Proteins towards Biomedical Applications

Nanoparticles have been widely used in important biomedical applications such as imaging, drug delivery, and disease therapy, in which targeting toward specific proteins is often essential. However, current targeting strategies mainly rely on surface modification with bioligands, which not only often fail to provide desired properties but also remain challenging. Here an unprecedented approach is reported, called reverse microemulsion-confined epitope-oriented surface imprinting and cladding (ROSIC), for facile, versatile, and controllable engineering coreless and core/shell nanoparticles with tunable monodispersed size as well as specific targeting capability toward proteins and peptides. Via engineering coreless imprinted and cladded silica nanoparticles, the effectiveness and superiority over conventional imprinting of the proposed approach are first verified. The prepared nanoparticles exhibit both high specificity and high affinity. Using quantum dots, superparamagnetic nanoparticles, silver nanoparticles, and upconverting nanoparticles as a representative set of core substrates, a variety of imprinted and cladded single-core/shell nanoparticles are then successfully prepared. Finally, using imprinted and cladded fluorescent nanoparticles as probes, in vitro targeted imaging of triple-negative breast cancer (TNBC) cells and in vivo targeted imaging of TNBC-bearing mice are achieved. This approach opens a new avenue to engineering of nanoparticles for targeting specific proteins, holding great prospects in biomedical applications.

Hybrid Molecularly Imprinted Polymers: The Future of Nanomedicine?

Molecularly imprinted polymers (MIPs) have been widely used in nanomedicine in the last few years. However, their potential is limited by their intrinsic properties resulting, for instance, in lack of control in drug release processes or complex detection for in vivo imaging. Recent attempts in creating hybrid nanomaterials combining MIPs with inorganic nanomaterials succeeded in providing a wide range of new interesting properties suitable for nanomedicine. Through this review, we aim to illustrate how hybrid molecularly imprinted polymers may improve patient care with enhanced imaging, treatments, and a combination of both.

Fighting Antibiotic-Resistant Bacteria : Promising Strategies Orchestrated by Molecularly Imprinted Polymers

Infections caused by antibiotic-resistant bacteria are difficult and sometimes impossible to treat, making them one of the major public health problems of our time. We highlight how one unique material , molecularly imprinted polymers (MIPs), can orchestrate several strategies to fight this major societal issue. MIPs are tailor-made biomimetic supramolecular receptors that recognize and bind target molecules with a high affinity and selectivity, comparable to those of antibodies. While research on MIPs for combatting cancer has been constantly flourishing, comprehensive work on their involvement in combatting resistant superbugs has been rather scarce. This review aims at filling this gap. We will describe what are the causes of bacterial resistance and at which level MIPs can deploy their weapons. MIPs' targets can be biofilm constituents, quorum sensing messengers, bacterial surface proteins and antibiotic-deactivating enzymes, among others. We will conclude on the current challenges and future developments in this field.

Epitope-imprinted polymers: Design principles of synthetic binding partners for natural biomacromolecules

Molecular imprinting (MI) has been explored as an increasingly viable tool for molecular recognition in various fields. However, imprinting of biologically relevant molecules like proteins is severely hampered by several problems. Inspired by natural antibodies, the use of epitopes as imprinting templates has been explored to circumvent those limitations, offering lower costs and greater versatility. Here, we review the latest innovations in this technology, as well as different applications where MI polymers (MIPs) have been used to target biomolecules of interest. We discuss the several steps in MI, from the choice of epitope and functional monomers to the different production methods and possible applications. We also critically explore how MIP performance can be assessed by various parameters. Last, we present perspectives on future breakthroughs and advances, offering insights into how MI techniques can be expanded to new fields such as tissue engineering.

Molecularly Imprinted Polymer Nanogels for Protein Recognition: Direct Proof of Specific Binding Sites by Solution STD and WaterLOGSY NMR Spectroscopies

Molecularly imprinted polymers (MIPs) are tailor-made synthetic antibodies possessing specific binding cavities designed for a target molecule. Currently, MIPs for protein targets are synthesized by imprinting a short surface-exposed fragment of the protein, called epitope or antigenic determinant. However, finding the epitope par excellence that will yield a peptide "synthetic antibody" cross-reacting exclusively with the protein from which it is derived, is not easy. We propose a computer-based rational approach to unambiguously identify the "best" epitope candidate. Then, using Saturation Transfer Difference (STD) and WaterLOGSY NMR spectroscopies, we prove the existence of specific binding sites created by the imprinting of this peptide epitope in the MIP nanogel. The optimized MIP nanogel could bind the epitope and cognate protein with a high affinity and selectivity. The study was performed on Hepatitis A Virus Cell Receptor-1 protein, also known as KIM-1 and TIM-1, for its ubiquitous implication in numerous pathologies.

Molecularly imprinted polymers in toxicology: a literature survey for the last 5 years

The science of toxicology dates back almost to the beginning of human history. Toxic chemicals, which are encountered in different forms, are always among the chemicals that should be investigated in criminal field, environmental application, pharmaceutic, and even industry, where many researches have been carried out studies for years. Almost all of not only drugs but also industrial dyes have toxic side and direct effects. Environmental micropollutants accumulate in the tissues of all living things, especially plants, and show short- or long-term toxic symptoms. Chemicals in forensic science can be known by detecting the effect they cause to the body with the similar mechanism. It is clear that the best tracking tool among analysis methods is molecularly printed polymer-based analytical setups. Different polymeric combinations of molecularly imprinted polymers allow further study on detection or extraction using chromatographic and spectroscopic instruments. In particular, methods used in forensic medicine can detect trace amounts of poison or biological residues on the scene. Molecularly imprinted polymers are still in their infancy and have many variables that need to be developed. In this review, we summarized how molecular imprinted polymers and toxicology intersect and what has been done about molecular imprinted polymers in toxicology by looking at the studies conducted in the last 5 years.

Abiotic Mimic of Matrix Metalloproteinase-9 Inhibitor against Advanced Metastatic Cancer

As the most representative family of proteinases related to tumorigenesis, matrix metalloproteinase-9 (MMP-9) represents a key player in cancer cell migration and regulation of the tumor microenvironment. The inhibition of MMP-9 activity has been pursued as a target for anticancer therapy. However, most synthetic MMP-9 inhibitors have failed in clinical trials because of their lack of selectivity. Here, an abiotic mimic based on molecularly imprinted nanoparticles has been designed as an inhibitor for MMP-9. To attain fast mass transfer and facilitate multifunctional roles, we synthesized the imprinted polymer thin layer on the surface of gold nanorods by reversible addition-fragmentation chain transfer polymerization using MMP-9 as the template, which captures MMP-9 selectively and inhibits its activity by providing steric hindrance to the activity-related domain of MMP-9. In vitro cell experiments and in vivo studies in mice demonstrate that the imprinted artificial antibody suppresses the migration and growth of metastatic tumors. The tumor growth inhibition rate reaches up to 54 ± 15%. Compared with the typical photothermal therapy induced by gold nanorods, the use of MMP-9-imprinted synthetic antibody could better inhibit the lung tumor metastasis by quenching the enzyme activity of MMP-9. This study offers a new paradigm in the engineering of imprinted nanoparticles as inhibitors for cancer therapy.

Typical Fluorescent Sensors Exploiting Molecularly Imprinted Hydrogels for Environmentally and Medicinally Important Analytes Detection

In this work, two typical fluorescent sensors were generated by exploiting molecularly imprinted polymeric hydrogels (MIPGs) for zearalenone (ZON) and glucuronic acid (GA) detection, via the analyte's self-fluorescence property and receptor's fluorescence effect, respectively. Though significant advances have been achieved on MIPG-fluorescent sensors endowed with superior stability over natural receptor-sensors, there is an increasing demand for developing sensing devices with cost-effective, easy-to-use, portable advantages in terms of commercialization. Zooming in on the commercial potential of MIPG-fluorescent sensors, the MIPG_ZON is synthesized using zearalanone (an analogue of ZON) as template, which exhibits good detection performance even in corn samples with a limit of detection of 1.6 μM. In parallel, fluorescein-incorporated MIPG_GA is obtained and directly used for cancer cell imaging, with significant specificity and selectivity. Last but not least, our consolidated application results unfold new opportunities for MIPG-fluorescent sensors for environmentally and medicinally important analytes detection.

Selective recognition of tumor cells by molecularly imprinted polymers

Molecularly imprinted polymers, developed 50 years ago, have garnered enormous attention as receptor-like materials. Lately, molecularly imprinted polymers have been employed as a specific target tool in favor of cancer diagnosis and therapy by the selective recognition of tumor cells. Although the molecular imprinting technology has been well-innovated recently, the cell still remains the most challenging target for imprinting. In this review, we summarize the advances in the synthesis of molecularly imprinted polymers suitable for the selective recognition of tumor cells. Through a sustained effort, three strategies have been developed including peptide-imprinting, polysaccharide-imprinting, and whole-cell imprinting, which have resulted in inspiring applications in effective cancer diagnosis and therapy. The major challenges and perspectives on the further directions related to the synthesis of molecularly imprinted polymers were also outlined.

Sialic Acid as a Biomarker Studied in Breast Cancer Cell Lines In Vitro Using Fluorescent Molecularly Imprinted Polymers

Sialylations are post-translational modifications of proteins and lipids that play important roles in many cellular events, including cell-cell interactions, proliferation, and migration. Tumor cells express high levels of sialic acid (SA), which are often associated with the increased invasive potential in clinical tumors, correlating with poor prognosis. To overcome the lack of natural SA-receptors, such as antibodies and lectins with high enough specificity and sensitivity, we have used molecularly imprinted polymers (MIPs), or “plastic antibodies”, as nanoprobes. Because high expression of epithelial cell adhesion molecule (EpCAM) in primary tumors is often associated with proliferation and a more aggressive phenotype, the expression of EpCAM and CD44 was initially analyzed. The SA-MIPs were used for the detection of SA on the cell surface of breast cancer cells. Lectins that specifically bind to the a-2,3 SA and a-2,6 SA variants were used for analysis of SA expression, with both flow cytometry and confocal microscopy. Here we show a correlation of EpCAM and SA expression when using the SA-MIPs for detection of SA. We also demonstrate the binding pattern of the SA-MIPs on the breast cancer cell lines using confocal microscopy. Pre-incubation of the SA-MIPs with SA-derivatives as inhibitors could reduce the binding of the SA-MIPs to the tumor cells, indicating the specificity of the SA-MIPs. In conclusion, the SA-MIPs may be a new powerful tool in the diagnostic analysis of breast cancer cells.

Molecularly Imprinted Polymer-Quantum Dot Materials in Optical Sensors: An Overview of Their Synthesis and Applications

In the last decades analytical methods have focused on the determination of target analytes at very low concentration levels. This has been accomplished through the use of traditional analytical methods that usually require high reagent consumption, expensive equipment and long pretreatment steps. Thus, there is a demand for simple, rapid, highly selective and user-friendly detection procedures. Quantum dots (QDs) are semiconductor fluorescent nanomaterials with unique optoelectronic properties that have shown great potential for the development of fluorescence probes. Besides, the combination of QDs with molecularly imprinted polymer (MIPs), synthetic materials with selective recognition, have been proposed as useful materials in the development of optical sensors. The resulting MIP-QDs optical sensors integrate the advantages of both techniques: the high sensitivity of QDs-based fluorescence sensors and the high selectivity of MIPs. This review gives a brief overview of the strategies for the synthesis of MIPs-QDs based optical sensors, highlighting the modifications in the synthesis procedure that improve the sensor performance. Finally, a revision of recent applications in sensing and bioimaging is presented.

Molecularly Imprinted Polymer Nanoparticles: An Emerging Versatile Platform for Cancer Therapy

Molecularly imprinted polymers (MIPs) are chemically synthesized affinity materials with tailor-made binding cavities complementary to the template molecules in shape, size, and functionality. Recently, engineering MIP-based nanomedicines to improve cancer therapy has become a rapidly growing field and future research direction. Because of the unique properties and functions of MIPs, MIP-based nanoparticles (nanoMIPs) are not only alternatives to current nanomaterials for cancer therapy, but also hold the potential to fill gaps associated with biological ligand-based nanomedicines, such as immunogenicity, stability, applicability, and economic viability. Here, we survey recent advances in the design and fabrication of nanoMIPs for cancer therapy and highlight their distinct features. In addition, how to use these features to achieve desired performance, including extended circulation, active targeting, controlled drug release and anti-tumor efficacy, is discussed and summarized. We expect that this minireview will inspire more advanced studies in MIP-based nanomedicines for cancer therapy.

A review of the incorporation of QDs and imprinting technology in optical sensors – imprinting methods and sensing responses

This review aims to cover the simultaneous method of using molecularly imprinted technology and quantum dots (QDs) as well as its application in the field of optical sensors.

Combinatorial design of a sialic acid imprinted binding site exploring a dual ion receptor approach

Dual-ion imprinting of sialic acid via cooperatively acting ureido- and crown ether functionalities leads to charge neutral sialic acid receptors with strong sialoglycopeptide affinity.

MIPs for commercial application in low-cost sensors and assays - An overview of the current status quo

Molecularly imprinted polymers (MIPs) have emerged over the past few decades as interesting synthetic alternatives due to their long-term chemical and physical stability and low-cost synthesis procedure. They have been integrated into many sensing platforms and assay formats for the detection of various targets, ranging from small molecules to macromolecular entities such as pathogens and whole cells. Despite the advantages MIPs have over natural receptors in terms of commercialization, the striking success stories of biosensor applications such as the glucose meter or the self-test for pregnancy have not been matched by MIP-based sensor or detection kits yet. In this review, we zoom in on the commercial potential of MIP technology and aim to summarize the latest developments in their commercialization and integration into sensors and assays with high commercial potential. We will also analyze which bottlenecks are inflicting with commercialization and how recent advances in commercial MIP synthesis could overcome these obstacles in order for MIPs to truly achieve their commercial potential in the near future.

Molecularly Imprinted Micelles for Fluorescent Sensing of Nonsteroidal Anti-Inflammatory Drugs (NSAIDs)

Nonsteroidal anti-inflammatory drugs (NSAIDs) are widely used over-the-counter drugs and their uncontrolled disposal is a significant environmental concern. Although their fluorescent sensing is a desirable method of detection for its sensitivity and simplicity, the structural similarity of the drugs makes the design of selective sensors highly challenging. A thiourea-based fluorescent functional monomer was identified in this work to enable highly efficient synthesis of molecularly imprinted nanoparticle (MINP) sensors for NSAIDs such as Indomethacin or Tolmetin. Micromolar binding affinities were obtained in aqueous solution, with binding selectivities comparable to those reported for polyclonal antibodies. The detection limit was ~50 ng/mL in aqueous solution, and common carboxylic acids such as acetic acid, benzoic acid, and citric acid showed negligible interference.

Molecularly imprinted polymers in biological applications

Molecularly imprinted polymers (MIPs) are currently widely used and further developed for biological applications. The MIP synthesis procedure is a key process, and a wide variety of protocols exist. The templates that are used for imprinting vary from the smallest glycosylated glycan structures or even amino acids to whole proteins or bacteria. The low cost, quick preparation, stability and reproducibility have been highlighted as advantages of MIPs. The biological applications utilizing MIPs discussed here include enzyme-linked assays, sensors, in vivo applications, drug delivery, cancer diagnostics and more. Indeed, there are numerous examples of how MIPs can be used as recognition elements similar to natural antibodies.

Molecularly Imprinted Polymers: Antibody Mimics for Bioimaging and Therapy

Molecularly imprinted polymers (MIPs) are tailor-made chemical receptors that recognize and bind target molecules with a high affinity and selectivity. MIPs came into the spotlight in 1993 when they were dubbed "antibody mimics," and ever since, they have been widely studied for the extraction or trapping of chemical pollutants, in immunoassays, and for the design of sensors. Owing to novel synthesis strategies resulting in more biocompatible MIPs in the form of soluble nanogels, these synthetic antibodies have found favor in the biomedical domain since 2010, when for the first time, they were shown to capture and eliminate a toxin in live mice. This review, covering the years 2015-2020, will first describe the rationale behind these antibody mimics, and the different synthesis methods that have been employed for the preparation of MIPs destined for in vitro and in vivo targeting and bioimaging of cancer biomarkers, an emerging and fast-growing area of MIP applications. MIPs have been synthesized for targeting and visualizing glycans and protein-based cell receptors overexpressed in certain diseases, which are well-known biomarkers for example for tumors. When loaded with drugs, the MIPs could locally kill the tumor cells, making them efficient therapeutic agents. We will end the review by reporting how MIPs themselves can act as therapeutics by inhibiting cancer growth. These works mark a new opening in the use of MIPs for antibody therapy and even immunotherapy, as materials of the future in nanomedicine.

Molecularly Imprinted Synthetic Antibodies: From Chemical Design to Biomedical Applications

Billions of dollars are invested into the monoclonal antibody market every year to meet the increasing demand in clinical diagnosis and therapy. However, natural antibodies still suffer from poor stability and high cost, as well as ethical issues in animal experiments. Thus, developing antibody substitutes or mimics is a long-term goal for scientists. The molecular imprinting technique presents one of the most promising strategies for antibody mimicking. The molecularly imprinted polymers (MIPs) are also called "molecularly imprinted synthetic antibodies" (MISAs). The breakthroughs of key technologies and innovations in chemistry and material science in the last decades have led to the rapid development of MISAs, and their molecular affinity has become comparable to that of natural antibodies. Currently, MISAs are undergoing a revolutionary transformation of their applications, from initial adsorption and separation to the rising fields of biomedicine. Herein, the fundamental chemical design of MISAs is examined, and then current progress in biomedical applications is the focus. Meanwhile, the potential of MISAs as qualified substitutes or even to transcend the performance of natural antibodies is discussed from the perspective of frontier needs in biomedicines, to facilitate the rapid development of synthetic artificial antibodies.

Selective Binding of Dopamine and Epinephrine in Water by Molecularly Imprinted Fluorescent Receptors

Catecholamines play important roles in biology but their structural similarity makes it challenging to construct synthetic receptors with selective binding. A combination of covalent and noncovalent binding groups in the hydrophobic core of water-soluble nanoparticles enabled them to recognize dopamine and epinephrine with an association constant (Ka ) of 3-4×104  M-1 in water, an order of magnitude higher than those of previously reported synthetic hosts. In addition, minute structural changes among analogues were detected including the addition or removal of a single hydroxyl or methyl group.