1
|
Mizrahi Rodriguez K, Lin S, Wu AX, Storme KR, Joo T, Grosz AF, Roy N, Syar D, Benedetti FM, Smith ZP. Penetrant-induced plasticization in microporous polymer membranes. Chem Soc Rev 2024; 53:2435-2529. [PMID: 38294167 DOI: 10.1039/d3cs00235g] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/01/2024]
Abstract
Penetrant-induced plasticization has prevented the industrial deployment of many polymers for membrane-based gas separations. With the advent of microporous polymers, new structural design features and unprecedented property sets are now accessible under controlled laboratory conditions, but property sets can often deteriorate due to plasticization. Therefore, a critical understanding of the origins of plasticization in microporous polymers and the development of strategies to mitigate this effect are needed to advance this area of research. Herein, an integrative discussion is provided on seminal plasticization theory and gas transport models, and these theories and models are compared to an exhaustive database of plasticization characteristics of microporous polymers. Correlations between specific polymer properties and plasticization behavior are presented, including analyses of plasticization pressures from pure-gas permeation tests and mixed-gas permeation tests for pure polymers and composite films. Finally, an evaluation of common and current state-of-the-art strategies to mitigate plasticization is provided along with suggestions for future directions of fundamental and applied research on the topic.
Collapse
Affiliation(s)
- Katherine Mizrahi Rodriguez
- Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, USA
| | - Sharon Lin
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, USA.
| | - Albert X Wu
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, USA.
| | - Kayla R Storme
- Department of Chemistry, Massachusetts Institute of Technology, Cambridge, MA 02139, USA
| | - Taigyu Joo
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, USA.
| | - Aristotle F Grosz
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, USA.
| | - Naksha Roy
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, USA.
| | - Duha Syar
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, USA.
| | - Francesco M Benedetti
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, USA.
| | - Zachary P Smith
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, USA.
| |
Collapse
|
2
|
Guo S, Yeo JY, Benedetti FM, Syar D, Swager TM, Smith ZP. A Microporous Poly(Arylene Ether) Platform for Membrane-Based Gas Separation. Angew Chem Int Ed Engl 2024; 63:e202315611. [PMID: 38084884 DOI: 10.1002/anie.202315611] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/16/2023] [Indexed: 01/18/2024]
Abstract
Membrane-based gas separations are crucial for an energy-efficient future. However, it is difficult to develop membrane materials that are high-performing, scalable, and processable. Microporous organic polymers (MOPs) combine benefits for gas sieving and solution processability. Herein, we report membrane performance for a new family of microporous poly(arylene ether)s (PAEs) synthesized via Pd-catalyzed C-O coupling reactions. The scaffold of these microporous polymers consists of rigid three-dimensional triptycene and stereocontorted spirobifluorene, endowing these polymers with micropore dimensions attractive for gas separations. This robust PAE synthesis method allows for the facile incorporation of functionalities and branched linkers for control of permeation and mechanical properties. A solution-processable branched polymer was formed into a submicron film and characterized for permeance and selectivity, revealing lab data that rivals property sets of commercially available membranes already optimized for much thinner configurations. Moreover, the branching motif endows these materials with outstanding plasticization resistance, and their microporous structure and stability enables benefits from competitive sorption, increasing CO2 /CH4 and (H2 S+CO2 )/CH4 selectivity in mixture tests as predicted by the dual-mode sorption model. The structural tunability, stability, and ease-of-processing suggest that this new platform of microporous polymers provides generalizable design strategies to form MOPs at scale for demanding gas separations in industry.
Collapse
Affiliation(s)
- Sheng Guo
- Department of Chemistry, Massachusetts Institute of Technology, Cambridge, MA 02139, USA
- Department of Polymer Science and Engineering, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing, Jiangsu, 210023, China
| | - Jing Ying Yeo
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, USA
| | - Francesco M Benedetti
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, USA
| | - Duha Syar
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, USA
| | - Timothy M Swager
- Department of Chemistry, Massachusetts Institute of Technology, Cambridge, MA 02139, USA
| | - Zachary P Smith
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, USA
| |
Collapse
|
3
|
Abdirakhimov M, Al-Rashed MH, Wójcik J. Hydrogen Sulfide Adsorption from Natural Gas Using Silver-Modified 13X Molecular Sieve. MATERIALS (BASEL, SWITZERLAND) 2023; 17:165. [PMID: 38204018 PMCID: PMC10779988 DOI: 10.3390/ma17010165] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/30/2023] [Revised: 12/21/2023] [Accepted: 12/26/2023] [Indexed: 01/12/2024]
Abstract
The removal of hydrogen sulfide from natural gas and other gases such as biogas, refinery gases, and coal gas is required because it is toxic and corrosive, even in traces. Zeolites are widely used in the removal of H2S from the abovementioned gases. In this work, we prepared an Ag-exchanged 13X molecular sieve by using different concentrations of AgNO3 to increase its adsorption properties. XRD, SEM, and BET techniques were used to characterize samples. To determine the adsorption properties of each of the samples, a laboratory setup with a fixed-bed adsorber was utilized. The adsorption capacity of modified 13X increased when the molar concentration of AgNO3 increased from 0.02 M to 0.05 M. However, the breakthrough time was attained quicker at a high molar concentration of 0.1 M AgNO3, indicating a low adsorption capacity. When compared to unmodified 13X, the adsorption capacity of AgII-13X increased by about 50 times. The results of this study suggest that the silver-modified 13X molecular sieve is highly effective at extracting H2S from natural gas.
Collapse
Affiliation(s)
- Mirzokhid Abdirakhimov
- Department of Chemical Engineering and Process Design, Silesian University of Technology, 44-100 Gliwice, Poland;
| | - Mohsen H. Al-Rashed
- Public Authority for Applied Education & Training, Department of Chemical Engineering, College of Technological Studies, Kuwait City 70654, Kuwait;
| | - Janusz Wójcik
- Department of Chemical Engineering and Process Design, Silesian University of Technology, 44-100 Gliwice, Poland;
| |
Collapse
|
4
|
Luo Z, Sheng Y, Jiang C, Pan Y, Wang X, Nezamzadeh-Ejhieh A, Ouyang J, Lu C, Liu J. Recent advances and prospects of metal-organic frameworks in cancer therapies. Dalton Trans 2023; 52:17601-17622. [PMID: 37953742 DOI: 10.1039/d3dt02543h] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/14/2023]
Abstract
Metal-organic frameworks (MOFs) have been broadly applied in biomedical and other fields. MOFs have high porosity, a large comparative area, and good biostability and have attracted significant attention, especially in cancer therapies. This paper presents the latest applications of MOFs in chemodynamic therapy (CDT), sonodynamic therapy (SDT), photodynamic therapy (PDT), photothermal therapy (PTT), immunotherapy (IT), and combination therapy for breast cancer. A combination therapy is the combination of two different treatment modalities, such as CDT and PDT combination therapy, and is considered more effective than separate therapies. Herein, we have also discussed the advantages and disadvantages of combination therapy in the treatment of breast cancer. This paper aims to illustrate the potential of MOFs in new cancer therapeutic approaches, discuss their potential advantages, and provide some reflections on the latest research results.
Collapse
Affiliation(s)
- Zhiying Luo
- Guangdong Provincial Key Laboratory of Research and Development of Natural Drugs, and School of Pharmacy, Guangdong Medical University, Guangdong Medical University Key Laboratory of Research and Development of New Medical Materials, Dongguan, 523808, China.
| | - Yu Sheng
- Tungwah High School of Dongguan City (Dongcheng Campus), 1st Guangming Road, 523125 Dongguan, Guangdong, China
| | - Chenyi Jiang
- Guangdong Provincial Key Laboratory of Research and Development of Natural Drugs, and School of Pharmacy, Guangdong Medical University, Guangdong Medical University Key Laboratory of Research and Development of New Medical Materials, Dongguan, 523808, China.
| | - Ying Pan
- Guangdong Provincial Key Laboratory of Research and Development of Natural Drugs, and School of Pharmacy, Guangdong Medical University, Guangdong Medical University Key Laboratory of Research and Development of New Medical Materials, Dongguan, 523808, China.
| | - Xiaoxiong Wang
- School of Materials and Environmental Engineering, Shenzhen Polytechnic University, Shenzhen, Guangdong, 518055, PR China
| | - Ali Nezamzadeh-Ejhieh
- Chemistry Department, Shahreza Branch, Islamic Azad University, Shahreza, Isfahan, Iran
| | - Jie Ouyang
- Key Laboratory for Breast Cancer Prevention and Treatment of Dongguan, Department of Breast Surgery, Dongguan Tungwah Hospital, Dongguan, China
| | - Chengyu Lu
- Guangdong Provincial Key Laboratory of Research and Development of Natural Drugs, and School of Pharmacy, Guangdong Medical University, Guangdong Medical University Key Laboratory of Research and Development of New Medical Materials, Dongguan, 523808, China.
| | - Jianqiang Liu
- Guangdong Provincial Key Laboratory of Research and Development of Natural Drugs, and School of Pharmacy, Guangdong Medical University, Guangdong Medical University Key Laboratory of Research and Development of New Medical Materials, Dongguan, 523808, China.
| |
Collapse
|
5
|
Ning H, Shi M, Yang Q, Huang J, Zhang X, Wu Y, Jie K. Rational Design of Porous Ionic Liquids for Coupling Natural Gas Purification with Waste Gas Conversion. Angew Chem Int Ed Engl 2023; 62:e202310741. [PMID: 37706280 DOI: 10.1002/anie.202310741] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/26/2023] [Revised: 09/12/2023] [Accepted: 09/14/2023] [Indexed: 09/15/2023]
Abstract
Removal of trace impurities for natural gas purification coupled with waste gas conversion is highly desired in industry. We here report a type of porous ionic liquids (PILs) that can realize the continuous flow separation of CH4 /CO2 /H2 S and the conversion of the captured H2 S to useful products. The PILs are synthesized through a step-by-step surface modification of ionic liquids (ILs) onto UiO-66-OH nanocrystals. The introduction of free tertiary amine groups on the nanocrystal surface endows these PILs with an exceptional ability to enrich H2 S from CO2 and CH4 with impressive selectivity, while the permanent pores of UiO-66-OH act as containers to store an exceptionally higher amount of the selectively captured H2 S than the corresponding nonporous ILs. Simultaneously, the tertiary amines as dual functional moieties offer effective catalytic sites for the conversion of the H2 S stored in PILs into 3-mercaptoisobutyric acid, a key intermediate required for the synthesis of Captopril (an antihypertensive drug). Molecular dynamics, density functional theory calculations and Grand Canonical Monte Carlo simulations help understand both the mechanisms of separation and catalysis performance, confirming that the tertiary amines as well as the permanent pores in UiO-66-OH play vital roles in the whole procedure.
Collapse
Affiliation(s)
- Hailong Ning
- State Key Laboratory of Coordination Chemistry, Key Laboratory of Mesoscopic Chemistry of MOE, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing, 210023, P. R. China
| | - Mingzhen Shi
- State Key Laboratory of Coordination Chemistry, Key Laboratory of Mesoscopic Chemistry of MOE, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing, 210023, P. R. China
| | - Qian Yang
- State Key Laboratory of Coordination Chemistry, Key Laboratory of Mesoscopic Chemistry of MOE, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing, 210023, P. R. China
| | - Jingwei Huang
- State Key Laboratory of Coordination Chemistry, Key Laboratory of Mesoscopic Chemistry of MOE, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing, 210023, P. R. China
| | - Xiaomin Zhang
- State Key Laboratory of Coordination Chemistry, Key Laboratory of Mesoscopic Chemistry of MOE, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing, 210023, P. R. China
- Institute of Green Chemistry and Engineering, Nanjing University, Suzhou, 215163, P. R. China
| | - Youting Wu
- State Key Laboratory of Coordination Chemistry, Key Laboratory of Mesoscopic Chemistry of MOE, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing, 210023, P. R. China
- Institute of Green Chemistry and Engineering, Nanjing University, Suzhou, 215163, P. R. China
| | - Kecheng Jie
- State Key Laboratory of Coordination Chemistry, Key Laboratory of Mesoscopic Chemistry of MOE, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing, 210023, P. R. China
- Jiangsu Key Laboratory of Advanced Organic Materials, Nanjing University, Nanjing, 210023, P. R. China
| |
Collapse
|
6
|
Wu WN, Mizrahi Rodriguez K, Roy N, Teesdale JJ, Han G, Liu A, Smith ZP. Engineering the Polymer-MOF Interface in Microporous Composites to Address Complex Mixture Separations. ACS APPLIED MATERIALS & INTERFACES 2023. [PMID: 37931132 DOI: 10.1021/acsami.3c11300] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/08/2023]
Abstract
Poor interfacial compatibility remains a pressing challenge in the fabrication of high-performance polymer-MOF composites. In response, introducing compatible chemistries such as a carboxylic acid moiety has emerged as a compelling strategy to increase polymer-MOF interactions. In this work, we leveraged compatible functionalities in UiO-66-NH2 and a carboxylic acid-functionalized PIM-1 to fabricate mixed-matrix membranes (MMMs) with improved separation performance compared to PIM-1-based MMMs in industrially relevant conditions. Under pure-gas conditions, PIM-COOH-based MMMs retained selectivity with increasing MOF loading and showed increased permeability due to increased diffusion. The composites were further investigated under industrially relevant conditions, including CO2/N2, CO2/CH4, and H2S/CO2/CH4 mixtures, to elucidate the effects of competitive sorption and plasticization. Incorporation of UiO-66-NH2 in PIM-COOH and PIM-1 mitigated the effects of CO2- and H2S-induced plasticization typically observed in linear polymers. In CO2-based binary mixed-gas tests, all samples showed similar performance as that in pure-gas tests, with minimal competitive sorption contributions associated with the amine functional groups of the MOF. In ternary mixed-gas tests, improved plasticization resistance and interfacial compatibility resulted in PIM-COOH-based MMMs having the highest H2S/CH4 and CO2/CH4 selectivity combinations among the films tested in this study. These findings demonstrate that selecting MOFs and polymers with compatible functional groups is a useful strategy in developing high-performing microporous MMMs that require stability under complex and industrially relevant conditions.
Collapse
Affiliation(s)
- Wan-Ni Wu
- Department of Chemical Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, Massachusetts 02139, United States
| | - Katherine Mizrahi Rodriguez
- Department of Materials Science and Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, Massachusetts 02139, United States
| | - Naksha Roy
- Department of Chemical Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, Massachusetts 02139, United States
| | - Justin J Teesdale
- Department of Chemical Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, Massachusetts 02139, United States
| | - Gang Han
- Department of Chemical Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, Massachusetts 02139, United States
- College of Environmental Science and Engineering, Nankai University, No. 38 Tongyan Road, Jinnan District, Tianjin300350, P.R. China
| | - Alexander Liu
- Department of Chemical Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, Massachusetts 02139, United States
| | - Zachary P Smith
- Department of Chemical Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, Massachusetts 02139, United States
| |
Collapse
|
7
|
Liu Y, Chen H, Li T, Ren Y, Wang H, Song Z, Li J, Zhao Q, Li J, Li L. Balancing the Crystallinity and Film Formation of Metal-Organic Framework Membranes through In Situ Modulation for Efficient Gas Separation. Angew Chem Int Ed Engl 2023; 62:e202309095. [PMID: 37488075 DOI: 10.1002/anie.202309095] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/28/2023] [Revised: 07/22/2023] [Accepted: 07/24/2023] [Indexed: 07/26/2023]
Abstract
Polycrystalline metal-organic framework (MOF) layers hold great promise as molecular sieve membranes for efficient gas separation. Nevertheless, the high crystallinity tends to cause inter-crystalline defects/cracks in the nearby crystals, which makes crystalline porous materials face a great challenge in the fabrication of defect-free membranes. Herein, for the first time, we demonstrate the balance between crystallinity and film formation of MOF membrane through a facile in situ modulation strategy. Monocarboxylic acid was introduced as a modulator to regulate the crystallinity via competitive complexation and thus concomitantly control the film-forming state during membrane growth. Through adjusting the ratio of modulator acid/linker acid, an appropriate balance between this structural "trade-off" was achieved. The resulting MOF membrane with moderate crystallinity and coherent morphology exhibits molecular sieving for H2 /CO2 separation with selectivity up to 82.5.
Collapse
Affiliation(s)
- Yutao Liu
- Shanxi Key Laboratory of Gas Energy Efficient and Clean Utilization, College of Chemical Engineering and Technology, Taiyuan University of Technology, Taiyuan, 030024, Shanxi, China
| | - Hui Chen
- Shanxi Key Laboratory of Gas Energy Efficient and Clean Utilization, College of Chemical Engineering and Technology, Taiyuan University of Technology, Taiyuan, 030024, Shanxi, China
| | - Tong Li
- Shanxi Key Laboratory of Gas Energy Efficient and Clean Utilization, College of Chemical Engineering and Technology, Taiyuan University of Technology, Taiyuan, 030024, Shanxi, China
| | - Yongheng Ren
- Shanxi Key Laboratory of Gas Energy Efficient and Clean Utilization, College of Chemical Engineering and Technology, Taiyuan University of Technology, Taiyuan, 030024, Shanxi, China
| | - Hui Wang
- Shanxi Key Laboratory of Gas Energy Efficient and Clean Utilization, College of Chemical Engineering and Technology, Taiyuan University of Technology, Taiyuan, 030024, Shanxi, China
| | - Zhengxuan Song
- Shanxi Key Laboratory of Gas Energy Efficient and Clean Utilization, College of Chemical Engineering and Technology, Taiyuan University of Technology, Taiyuan, 030024, Shanxi, China
| | - Jianhui Li
- Shanxi Key Laboratory of Gas Energy Efficient and Clean Utilization, College of Chemical Engineering and Technology, Taiyuan University of Technology, Taiyuan, 030024, Shanxi, China
| | - Qiang Zhao
- Shanxi Key Laboratory of Gas Energy Efficient and Clean Utilization, College of Chemical Engineering and Technology, Taiyuan University of Technology, Taiyuan, 030024, Shanxi, China
| | - Jinping Li
- Shanxi Key Laboratory of Gas Energy Efficient and Clean Utilization, College of Chemical Engineering and Technology, Taiyuan University of Technology, Taiyuan, 030024, Shanxi, China
| | - Libo Li
- Shanxi Key Laboratory of Gas Energy Efficient and Clean Utilization, College of Chemical Engineering and Technology, Taiyuan University of Technology, Taiyuan, 030024, Shanxi, China
| |
Collapse
|
8
|
Chen LX, Yin SJ, Chai TQ, Wang JL, Chen GY, Zhou X, Yang FQ. Ultra-High Adsorption Capacity of Core-Shell-Derived Magnetic Zeolite Imidazolate Framework-67 as Adsorbent for Selective Extraction of Theophylline. Molecules 2023; 28:5573. [PMID: 37513444 PMCID: PMC10383973 DOI: 10.3390/molecules28145573] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/16/2023] [Revised: 07/14/2023] [Accepted: 07/19/2023] [Indexed: 07/30/2023] Open
Abstract
A core-shell-derived structural magnetic zeolite imidazolate framework-67 (Fe3O4-COOH@ZIF-67) nanocomposite was fabricated through a single-step coating of zeolite imidazolate framework-67 on glutaric anhydride-functionalized Fe3O4 nanosphere for the magnetic solid-phase extraction (MSPE) of theophylline (TP). The Fe3O4-COOH@ZIF-67 nanocomposite was characterized through scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectrometry, Fourier transform infrared spectroscopy, Zeta potential analysis, X-ray diffraction, Brunauer-Emmett-Teller, and vibrating sample magnetometer. The material has a high specific surface area and good magnetism, which maintains the regular dodecahedron structure of ZIF-67 without being destroyed by the addition of Fe3O4-COOH nanospheres. The Fe3O4-COOH@ZIF-67 can rapidly adsorb TP mainly through the strong coordination interaction between undercoordinated Co2+ on ZIF-67 and -NH from imidazole of TP. The adsorption and desorption conditions, such as the amount of adsorbent, adsorption time, pH value, and elution solvent, were optimized. The kinetics of TP adsorption on Fe3O4-COOH@ZIF-67 was found to follow pseudo-second-order kinetics. The Langmuir model fits the adsorption data well and the maximum adsorption capacity is 1764 mg/g. Finally, the developed MSPE-HPLC method was applied in the enrichment and analysis of TP in four tea samples and rabbit plasma. TP was not detected in oolong tea and rabbit plasma, and its contents in jasmine tea, black tea, and green tea are 5.80, 4.31, and 1.53 μg/g, respectively. The recoveries of spiked samples are between 74.41% and 86.07% with RSD in the range of 0.81-3.83%. The adsorption performance of Fe3O4-COOH@ZIF-67 nanocomposite was nearly unchanged after being stored at room temperature for at least 80 days and two consecutive adsorption-desorption cycles. The results demonstrate that Fe3O4-COOH@ZIF-67 nanocomposite is a promising magnetic adsorbent for the preconcentration of TP in complex samples.
Collapse
Affiliation(s)
- Ling-Xiao Chen
- School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 401331, China
| | - Shi-Jun Yin
- School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 401331, China
| | - Tong-Qing Chai
- School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 401331, China
| | - Jia-Li Wang
- School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 401331, China
| | - Guo-Ying Chen
- School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 401331, China
| | - Xi Zhou
- School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 401331, China
| | - Feng-Qing Yang
- School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 401331, China
| |
Collapse
|
9
|
Wang Y, Liu X, Duan M, Zhang C, Fan H, Yang C, Jiao T, Kou T, Shangguan J. Synergistic effect of bimetal in isoreticular Zn-Cu-1,3,5-benzenetricarboxylate on room temperature gaseous sulfides removal. J Colloid Interface Sci 2023; 641:707-718. [PMID: 36965342 DOI: 10.1016/j.jcis.2023.03.108] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/30/2022] [Revised: 03/06/2023] [Accepted: 03/17/2023] [Indexed: 03/27/2023]
Abstract
Isoreticular bimetal M-Cu-BTC has considerable potential in improving the sulfides removal performance of Cu-BTC. Herein, three transition metals, namely, Zn2+, Ni2+ and Co2+, were assessed to fabricate M-Cu-BTC, a desirable isoreticular bimetal. Results demonstrated the feasibility of using Zn2+ to fabricate an isoreticular bimetallic Zn-Cu-BTC. The Zn2+ doping content of Zn-Cu-BTC was varied to investigate its influence on the hydrogen sulfide (H2S) and methyl sulfide (CH3SCH3) removal performance of Cu-BTC. The experimental results indicated that the sulfides removal performance of Zn-Cu-BTC increased and then decreased with increasing Zn doping content. The highest H2S and CH3SCH3 removal capacities of 84.3 and 93.9 mg S/g, respectively, were obtained when the Zn2+ doping content was 17%. The hybridisation of Zn and Cu in Zn-Cu-BTC induced a strong interaction between them. This interaction increased the binding energies of H2S and CH3SCH3 towards the Cu and Zn adsorption sites while weakening the bond order between Zn and Cu. The weakened bond order made the Zn-Cu bonds easier to form metal sulfides during desulfurization process, thereby synergistically enhancing sulphide removal.
Collapse
Affiliation(s)
- Yeshuang Wang
- State Key Laboratory of Clean and Efficient Coal Utilization, Taiyuan University of Technology, Taiyuan 030024, China
| | - Xuan Liu
- State Key Laboratory of Clean and Efficient Coal Utilization, Taiyuan University of Technology, Taiyuan 030024, China
| | - Mingxian Duan
- State Key Laboratory of Clean and Efficient Coal Utilization, Taiyuan University of Technology, Taiyuan 030024, China
| | - Chaonan Zhang
- State Key Laboratory of Clean and Efficient Coal Utilization, Taiyuan University of Technology, Taiyuan 030024, China
| | - Huiling Fan
- State Key Laboratory of Clean and Efficient Coal Utilization, Taiyuan University of Technology, Taiyuan 030024, China.
| | - Chao Yang
- College of Environmental Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, China.
| | - Tingting Jiao
- State Key Laboratory of Clean and Efficient Coal Utilization, Taiyuan University of Technology, Taiyuan 030024, China
| | - Tian Kou
- State Key Laboratory of Clean and Efficient Coal Utilization, Taiyuan University of Technology, Taiyuan 030024, China
| | - Ju Shangguan
- State Key Laboratory of Clean and Efficient Coal Utilization, Taiyuan University of Technology, Taiyuan 030024, China
| |
Collapse
|
10
|
Oxidase mimicking Co/2Fe MOF included biosensor for sialic acid detection. Talanta 2023; 254:124166. [PMID: 36493566 DOI: 10.1016/j.talanta.2022.124166] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/29/2022] [Revised: 11/04/2022] [Accepted: 11/30/2022] [Indexed: 12/12/2022]
Abstract
A facile amperometric biosensor that included oxidase mimicking Co/2Fe metal-organic framework (MOF) for sialic acid (SA) detection was prepared. Amperometric SA biosensor was constructed on a gold screen-printed electrode via immobilization of Co/2Fe MOF and N-acetylneuraminic Acid Aldolase (NANA-Aldolase) enzyme, respectively. NANA-Aldolase enzyme converts free SA into pyruvate and N-acetyl-d-mannosamine. After this conversion, oxidase mimicking Co/2Fe bimetallic MOF converts pyruvate into acetylphosphate and O2 into H2O2. Investigation of analytical characteristics resulted with the linear range of 0.02 mM-1.00 mM of SA concentration with limit of detection value of 0.026 mM. Sample application studies with developed SA biosensor were carried out with GD3 ganglioside and HeLa cancer cell lines which have high SA concentrations while A549 cell lines were also used as control group. Before detecting free SA, the bound SA was freed from SA sources where every step was monitored via electron impedance spectroscopy. Then, free SA was successfully detected with the amperometric SA biosensor and as a result, more practical and accurate system was developed.
Collapse
|
11
|
Dong A, Chen D, Li Q, Qian J. Metal-Organic Frameworks for Greenhouse Gas Applications. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023; 19:e2201550. [PMID: 36563116 DOI: 10.1002/smll.202201550] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/03/2022] [Revised: 11/15/2022] [Indexed: 06/17/2023]
Abstract
Using petrol to supply energy for a car or burning coal to heat a building generates plenty of greenhouse gas (GHG) emissions, including carbon dioxide (CO2 ), water vapor (H2 O), methane (CH4 ), nitrous oxide (N2 O), ozone (O3 ), fluorinated gases. These up-and-coming metal-organic frameworks (MOFs) are structurally endowed with rigid inorganic nodes and versatile organic linkers, which have been extensively used in the GHG-related applications to improve the lives and protect the environment. Porous MOF materials and their derivatives have been demonstrated to be competitive and promising candidates for GHG separation, storage and conversions as they shows facile preparation, large porosity, adjustable nanostructure, abundant topology, and tunable physicochemical property. Enormous progress has been made in GHG storage and separation intrinsically stemmed from the different interaction between guest molecule and host framework from MOF itself in the recent five years. Meanwhile, the use of porous MOF materials to transform GHG and the influence of external conditions on the adsorption performance of MOFs for GHG are also enclosed. In this review, it is also highlighted that the existing challenges and future directions are discussed and envisioned in the rational design, facile synthesis and comprehensive utilization of MOFs and their derivatives for practical applications.
Collapse
Affiliation(s)
- Anrui Dong
- Key Laboratory of Carbon Materials of Zhejiang Province, College of Chemistry and Materials Engineering, Wenzhou University, Wenzhou, 325000, P. R. China
| | - Dandan Chen
- Key Laboratory of Carbon Materials of Zhejiang Province, College of Chemistry and Materials Engineering, Wenzhou University, Wenzhou, 325000, P. R. China
| | - Qipeng Li
- State Key Laboratory of Structural Chemistry, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, 350002, P. R. China
- College of Chemistry and Chemical Engineering, Zhaotong University, Zhaotong, 657099, P. R. China
| | - Jinjie Qian
- Key Laboratory of Carbon Materials of Zhejiang Province, College of Chemistry and Materials Engineering, Wenzhou University, Wenzhou, 325000, P. R. China
- State Key Laboratory of Structural Chemistry, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, 350002, P. R. China
| |
Collapse
|
12
|
Tan X, Robijns S, Thür R, Ke Q, De Witte N, Lamaire A, Li Y, Aslam I, Van Havere D, Donckels T, Van Assche T, Van Speybroeck V, Dusselier M, Vankelecom I. Truly combining the advantages of polymeric and zeolite membranes for gas separations. Science 2022; 378:1189-1194. [PMID: 36520897 DOI: 10.1126/science.ade1411] [Citation(s) in RCA: 15] [Impact Index Per Article: 7.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
Abstract
Mixed-matrix membranes (MMMs) have been investigated to render energy-intensive separations more efficiently by combining the selectivity and permeability performance, robustness, and nonaging properties of the filler with the easy processing, handling, and scaling up of the polymer. However, truly combining all in one single material has proven very challenging. In this work, we filled a commercial polyimide with ultrahigh loadings of a high-aspect ratio, CO2-philic Na-SSZ-39 zeolite with a three-dimensional channel system that precisely separates gas molecules. By carefully designing both zeolite and MMM synthesis, we created a gas-percolation highway across a flexible and aging-resistant (more than 1 year) membrane. The combination of a CO2-CH4 mixed-gas selectivity of ~423 and a CO2 permeability of ~8300 Barrer outperformed all existing polymer-based membranes and even most zeolite-only membranes.
Collapse
Affiliation(s)
- Xiaoyu Tan
- Centre for Membrane Separations, Adsorption, Catalysis and Spectroscopy for Sustainable Solutions (cMACS), KU Leuven, Celestijnenlaan 200F, 3001 Leuven, Belgium
| | - Sven Robijns
- Center for Sustainable Catalysis and Engineering, KU Leuven, Celestijnenlaan 200F, 3001 Leuven, Belgium
| | - Raymond Thür
- Centre for Membrane Separations, Adsorption, Catalysis and Spectroscopy for Sustainable Solutions (cMACS), KU Leuven, Celestijnenlaan 200F, 3001 Leuven, Belgium
| | - Quanli Ke
- Center for Sustainable Catalysis and Engineering, KU Leuven, Celestijnenlaan 200F, 3001 Leuven, Belgium
| | - Niels De Witte
- Department of Chemical Engineering, Vrije Universiteit Brussel, Pleinlaan 2, 1050 Brussels, Belgium
| | - Aran Lamaire
- Center for Molecular Modeling, Ghent University, Tech Lane Ghent Science Park, Technologiepark 46, 9052 Zwijnaarde, Belgium
| | - Yun Li
- Centre for Membrane Separations, Adsorption, Catalysis and Spectroscopy for Sustainable Solutions (cMACS), KU Leuven, Celestijnenlaan 200F, 3001 Leuven, Belgium
| | - Imran Aslam
- Centre for Membrane Separations, Adsorption, Catalysis and Spectroscopy for Sustainable Solutions (cMACS), KU Leuven, Celestijnenlaan 200F, 3001 Leuven, Belgium
| | - Daan Van Havere
- Centre for Membrane Separations, Adsorption, Catalysis and Spectroscopy for Sustainable Solutions (cMACS), KU Leuven, Celestijnenlaan 200F, 3001 Leuven, Belgium
| | - Thibaut Donckels
- Center for Sustainable Catalysis and Engineering, KU Leuven, Celestijnenlaan 200F, 3001 Leuven, Belgium
| | - Tom Van Assche
- Department of Chemical Engineering, Vrije Universiteit Brussel, Pleinlaan 2, 1050 Brussels, Belgium
| | - Veronique Van Speybroeck
- Center for Molecular Modeling, Ghent University, Tech Lane Ghent Science Park, Technologiepark 46, 9052 Zwijnaarde, Belgium
| | - Michiel Dusselier
- Center for Sustainable Catalysis and Engineering, KU Leuven, Celestijnenlaan 200F, 3001 Leuven, Belgium
| | - Ivo Vankelecom
- Centre for Membrane Separations, Adsorption, Catalysis and Spectroscopy for Sustainable Solutions (cMACS), KU Leuven, Celestijnenlaan 200F, 3001 Leuven, Belgium
| |
Collapse
|
13
|
Laptash N, Udovenko A, Vasiliev A, Merkulov E. Strong hydrogen bond in the crystal structure design of CuNbOF5·4H2O. J SOLID STATE CHEM 2022. [DOI: 10.1016/j.jssc.2022.123781] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
|
14
|
Chan YH, Lock SSM, Wong MK, Yiin CL, Loy ACM, Cheah KW, Chai SYW, Li C, How BS, Chin BLF, Chan ZP, Lam SS. A state-of-the-art review on capture and separation of hazardous hydrogen sulfide (H 2S): Recent advances, challenges and outlook. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2022; 314:120219. [PMID: 36150621 DOI: 10.1016/j.envpol.2022.120219] [Citation(s) in RCA: 10] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/19/2022] [Revised: 09/12/2022] [Accepted: 09/16/2022] [Indexed: 06/16/2023]
Abstract
Hydrogen sulfide (H2S) is a flammable, corrosive and lethal gas even at low concentrations (ppm levels). Hence, the capture and removal of H2S from various emitting sources (such as oil and gas processing facilities, natural emissions, sewage treatment plants, landfills and other industrial plants) is necessary to prevent and mitigate its adverse effects on human (causing respiratory failure and asphyxiation), environment (creating highly flammable and explosive environment), and facilities (resulting in corrosion of industrial equipment and pipelines). In this review, the state-of-the-art technologies for H2S capture and removal are reviewed and discussed. In particular, the recent technologies for H2S removal such as membrane, adsorption, absorption and membrane contactor are extensively reviewed. To date, adsorption using metal oxide-based sorbents is by far the most established technology in commercial scale for the fine removal of H2S, while solvent absorption is also industrially matured for bulk removal of CO2 and H2S simultaneously. In addition, the strengths, limitations, technological gaps and way forward for each technology are also outlined. Furthermore, the comparison of established carbon capture technologies in simultaneous and selective removal of H2S-CO2 is also comprehensively discussed and presented. It was found that the existing carbon capture technologies are not adequate for the selective removal of H2S from CO2 due to their similar characteristics, and thus extensive research is still needed in this area.
Collapse
Affiliation(s)
- Yi Herng Chan
- PETRONAS Research Sdn. Bhd. (PRSB), Lot 3288 & 3289, off Jalan Ayer Itam, Kawasan Institusi Bangi, 43000, Kajang, Selangor, Malaysia
| | - Serene Sow Mun Lock
- CO(2) Research Center (CO(2)RES), Department of Chemical Engineering, Universiti Teknologi PETRONAS, 32610, Seri Iskandar, Malaysia
| | - Mee Kee Wong
- PETRONAS Research Sdn. Bhd. (PRSB), Lot 3288 & 3289, off Jalan Ayer Itam, Kawasan Institusi Bangi, 43000, Kajang, Selangor, Malaysia
| | - Chung Loong Yiin
- Department of Chemical Engineering and Energy Sustainability, Faculty of Engineering, Universiti Malaysia Sarawak (UNIMAS), 94300, Kota Samarahan, Sarawak, Malaysia; Institute of Sustainable and Renewable Energy (ISuRE), Universiti Malaysia Sarawak (UNIMAS), 94300, Kota Samarahan, Sarawak, Malaysia
| | | | - Kin Wai Cheah
- School of Computing, Engineering and Digital Technologies, Teesside University, Middlesbrough, TS1 3BX, United Kingdom
| | - Slyvester Yew Wang Chai
- Biomass Waste-to-Wealth Special Interest Group, Research Centre for Sustainable Technologies, Faculty of Engineering, Computing and Science, Swinburne University of Technology, Jalan Simpang Tiga, 93350, Kuching, Sarawak, Malaysia
| | - Claudia Li
- Department of Chemical & Biomolecular Engineering, National University of Singapore, 117585, Singapore
| | - Bing Shen How
- Biomass Waste-to-Wealth Special Interest Group, Research Centre for Sustainable Technologies, Faculty of Engineering, Computing and Science, Swinburne University of Technology, Jalan Simpang Tiga, 93350, Kuching, Sarawak, Malaysia
| | - Bridgid Lai Fui Chin
- Department of Chemical and Energy Engineering, Faculty of Engineering and Science, Curtin University Malaysia, CDT 250, 98009, Miri, Sarawak, Malaysia; Energy and Environment Research Cluster, Faculty of Engineering and Science, Curtin University Malaysia, CDT 250, 98009, Miri, Sarawak, Malaysia
| | - Zhe Phak Chan
- PETRONAS Research Sdn. Bhd. (PRSB), Lot 3288 & 3289, off Jalan Ayer Itam, Kawasan Institusi Bangi, 43000, Kajang, Selangor, Malaysia
| | - Su Shiung Lam
- Pyrolysis Technology Research Group, Higher Institution Centre of Excellence (HICoE), Institute of Tropical Aquaculture and Fisheries (AKUATROP), Universiti Malaysia Terengganu, 21030 Kuala Nerus, Terengganu, Malaysia; Henan Province Engineering Research Center for Biomass Value-added Products, School of Forestry, Henan Agricultural University, Zhengzhou, 450002, China; Sustainability Cluster, School of Engineering, University of Petroleum & Energy Studies, Dehradun, Uttarakhand, 248007, India.
| |
Collapse
|
15
|
Hou R, Wang S, Wang L, Li C, Wang H, Xu Y, Wang C, Pan Y, Xing W. Enhanced CO2 separation performance by incorporating KAUST-8 nanosheets into crosslinked poly(ethylene oxide) membrane. Sep Purif Technol 2022. [DOI: 10.1016/j.seppur.2022.123057] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/01/2023]
|
16
|
Shen Q, Cong S, Zhu J, Zhang Y, He R, Yi S, Zhang Y. Novel pyrazole-based MOF synergistic polymer of intrinsic microporosity membranes for high-efficient CO2 capture. J Memb Sci 2022. [DOI: 10.1016/j.memsci.2022.121107] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/05/2022]
|
17
|
Liu Q, Yang Z, Liu G, Sun L, Xu R, Zhong J. Functionalized GO Membranes for Efficient Separation of Acid Gases from Natural Gas: A Computational Mechanistic Understanding. MEMBRANES 2022; 12:1155. [PMID: 36422148 PMCID: PMC9693057 DOI: 10.3390/membranes12111155] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/19/2022] [Revised: 11/10/2022] [Accepted: 11/15/2022] [Indexed: 06/16/2023]
Abstract
Membrane separation technology is applied in natural gas processing, while a high-performance membrane is highly in demand. This paper considers the bright future of functionalized graphene oxide (GO) membranes in acid gas removal from natural gas. By molecular simulations, the adsorption and diffusion behaviors of several unary gases (N2, CH4, CO2, H2S, and SO2) are explored in the 1,4-phenylenediamine-2-sulfonate (PDASA)-doped GO channels. Molecular insights show that the multilayer adsorption of acid gases evaluates well by the Redlich-Peterson model. A tiny amount of PDASA promotes the solubility coefficient of CO2 and H2S, respectively, up to 4.5 and 5.3 mmol·g-1·kPa-1, nearly 2.5 times higher than those of a pure GO membrane, which is due to the improved binding affinity, great isosteric heat, and hydrogen bonds, while N2 and CH4 only show single-layer adsorption with solubility coefficients lower than 0.002 mmol·g-1·kPa-1, and their weak adsorption is insusceptible to PDASA. Although acid gas diffusivity in GO channels is inhibited below 20 × 10-6 cm2·s-1 by PDASA, the solubility coefficient of acid gases is certainly high enough to ensure their separation efficiency. As a result, the permeabilities (P) of acid gases and their selectivities (α) over CH4 are simultaneously improved (PCO2 = 7265.5 Barrer, αCO2/CH4 = 95.7; P(H2S+CO2) = 42075.1 Barrer, αH2S/CH4 = 243.8), which outperforms most of the ever-reported membranes. This theoretical study gives a mechanistic understanding of acid gas separation and provides a unique design strategy to develop high-performance GO membranes toward efficient natural gas processing.
Collapse
Affiliation(s)
- Quan Liu
- Analytical and Testing Center, School of Chemical Engineering, Anhui University of Science and Technology, Huainan 232001, China
| | - Zhonglian Yang
- Analytical and Testing Center, School of Chemical Engineering, Anhui University of Science and Technology, Huainan 232001, China
| | - Gongping Liu
- State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Nanjing Tech University, 30 Puzhu Road (S), Nanjing 211816, China
| | - Longlong Sun
- Analytical and Testing Center, School of Chemical Engineering, Anhui University of Science and Technology, Huainan 232001, China
| | - Rong Xu
- Key Laboratory of Advanced Catalytic Materials and Technology, School of Petrochemical Engineering, Changzhou University, Gehu Road, Changzhou 213164, China
| | - Jing Zhong
- Key Laboratory of Advanced Catalytic Materials and Technology, School of Petrochemical Engineering, Changzhou University, Gehu Road, Changzhou 213164, China
| |
Collapse
|
18
|
Hu Q, Zhu C, Yan W, Wang Y, Cui S, Chen X, Liu B. Coordination-Assistant Chiral Agent Anchoring on Amphiphilic Graphitic Phase Carbon Nitride Membrane for Multiple Molecular Separation. ACS APPLIED MATERIALS & INTERFACES 2022; 14:50235-50245. [PMID: 36315245 DOI: 10.1021/acsami.2c15795] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
Membranes composed of two-dimensional (2D) materials suffer from low stability and structural swelling and are usually restricted to applications in aqueous systems. Among various 2D materials, graphitic phase carbon nitride (GCN, g-C3N4) has shown great application potential owing to its structural tunability. Herein, we develop a coordination-assisted strategy to regulate the GCN layer spacing and chemical environment via copper ion (Cu2+) coordination-assisted intercalation of enantiopure (1S,2S)-(-)-1,2-diphenyl-1,2-ethanediamine (DPE) between GCN nanosheets. The obtained GCN-Cu-DPE membrane is continuous and intact, free of cracks and pinholes, stable under acidic and alkaline conditions, and exhibits water permeability above 215 L m-2 h-1 bar-1 and a high rejection rate to dye molecules. The membrane is amphiphilicity and thus allows both polar solvent (water) and nonpolar solvent (hexane) to freely pass through. Remarkably, the permeation rate is proportional to the viscosity of the solvent. Benefiting from the chiral space between nanosheets, the GCN-Cu-DPE membrane shows selective permeation of aspartic acid racemate in aqueous systems and limonene racemate in the organic phase. Our work demonstrates a general and promising strategy for chiral membrane fabrication toward high-value-added chiral separation, especially in the pharmaceutical industry.
Collapse
Affiliation(s)
- Qing Hu
- School of Chemistry and Materials Science, University of Science and Technology of China, Hefei, Anhui230026, China
| | - Chaofeng Zhu
- School of Chemistry and Materials Science, University of Science and Technology of China, Hefei, Anhui230026, China
| | - Wen Yan
- School of Chemistry and Materials Science, University of Science and Technology of China, Hefei, Anhui230026, China
| | - Yang Wang
- School of Chemistry and Materials Science, University of Science and Technology of China, Hefei, Anhui230026, China
| | - Songlin Cui
- School of Chemistry and Materials Science, University of Science and Technology of China, Hefei, Anhui230026, China
| | - Xihai Chen
- School of Chemistry and Materials Science, University of Science and Technology of China, Hefei, Anhui230026, China
| | - Bo Liu
- School of Chemistry and Materials Science, University of Science and Technology of China, Hefei, Anhui230026, China
| |
Collapse
|
19
|
Prediction of the Ibuprofen Loading Capacity of MOFs by Machine Learning. BIOENGINEERING (BASEL, SWITZERLAND) 2022; 9:bioengineering9100517. [PMID: 36290485 PMCID: PMC9598200 DOI: 10.3390/bioengineering9100517] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/13/2022] [Revised: 09/14/2022] [Accepted: 09/28/2022] [Indexed: 11/07/2022]
Abstract
Metal-organic frameworks (MOFs) have been widely researched as drug delivery systems due to their intrinsic porous structures. Herein, machine learning (ML) technologies were applied for the screening of MOFs with high drug loading capacity. To achieve this, first, a comprehensive dataset was gathered, including 40 data points from more than 100 different publications. The organic linkers, metal ions, and the functional groups, as well as the surface area and the pore volume of the investigated MOFs, were chosen as the model’s inputs, and the output was the ibuprofen (IBU) loading capacity. Thereafter, various advanced and powerful machine learning algorithms, such as support vector regression (SVR), random forest (RF), adaptive boosting (AdaBoost), and categorical boosting (CatBoost), were employed to predict the ibuprofen loading capacity of MOFs. The coefficient of determination (R2) of 0.70, 0.72, 0.66, and 0.76 were obtained for the SVR, RF, AdaBoost, and CatBoost approaches, respectively. Among all the algorithms, CatBoost was the most reliable, exhibiting superior performance regarding the sparse matrices and categorical features. Shapley additive explanations (SHAP) analysis was employed to explore the impact of the eigenvalues of the model’s outputs. Our initial results indicate that this methodology is a well generalized, straightforward, and cost-effective method that can be applied not only for the prediction of IBU loading capacity, but also in many other biomaterials projects.
Collapse
|
20
|
Cheng Y, Datta SJ, Zhou S, Jia J, Shekhah O, Eddaoudi M. Advances in metal-organic framework-based membranes. Chem Soc Rev 2022; 51:8300-8350. [PMID: 36070414 DOI: 10.1039/d2cs00031h] [Citation(s) in RCA: 29] [Impact Index Per Article: 14.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/19/2022]
Abstract
Membrane-based separations have garnered considerable attention owing to their high energy efficiency, low capital cost, small carbon footprint, and continuous operation mode. As a class of highly porous crystalline materials with well-defined pore systems and rich chemical functionalities, metal-organic frameworks (MOFs) have demonstrated great potential as promising membrane materials over the past few years. Different types of MOF-based membranes, including polycrystalline membranes, mixed matrix membranes (MMMs), and nanosheet-based membranes, have been developed for diversified applications with remarkable separation performances. In this comprehensive review, we first discuss the general classification of membranes and outline the historical development of MOF-based membranes. Subsequently, particular attention is devoted to design strategies for MOF-based membranes, along with detailed discussions on the latest advances on these membranes for various gas and liquid separation processes. Finally, challenges and future opportunities for the industrial implementation of these membranes are identified and outlined with the intent of providing insightful guidance on the design and fabrication of high-performance membranes in the future.
Collapse
Affiliation(s)
- Youdong Cheng
- Functional Materials, Design, Discovery and Development (FMD3), Advanced Membrane & Porous Materials Center (AMPMC), Division of Physical Sciences and Engineering, King Abdullah University of Science and Technology, Thuwal, Saudi Arabia.
| | - Shuvo Jit Datta
- Functional Materials, Design, Discovery and Development (FMD3), Advanced Membrane & Porous Materials Center (AMPMC), Division of Physical Sciences and Engineering, King Abdullah University of Science and Technology, Thuwal, Saudi Arabia.
| | - Sheng Zhou
- Functional Materials, Design, Discovery and Development (FMD3), Advanced Membrane & Porous Materials Center (AMPMC), Division of Physical Sciences and Engineering, King Abdullah University of Science and Technology, Thuwal, Saudi Arabia.
| | - Jiangtao Jia
- Functional Materials, Design, Discovery and Development (FMD3), Advanced Membrane & Porous Materials Center (AMPMC), Division of Physical Sciences and Engineering, King Abdullah University of Science and Technology, Thuwal, Saudi Arabia.
| | - Osama Shekhah
- Functional Materials, Design, Discovery and Development (FMD3), Advanced Membrane & Porous Materials Center (AMPMC), Division of Physical Sciences and Engineering, King Abdullah University of Science and Technology, Thuwal, Saudi Arabia.
| | - Mohamed Eddaoudi
- Functional Materials, Design, Discovery and Development (FMD3), Advanced Membrane & Porous Materials Center (AMPMC), Division of Physical Sciences and Engineering, King Abdullah University of Science and Technology, Thuwal, Saudi Arabia.
| |
Collapse
|
21
|
Mousavian P, Esrafili MD, Sardroodi JJ. A computational study of CH4 storage on Sc functionalized C48B12 heterofullerene. Chem Phys Lett 2022. [DOI: 10.1016/j.cplett.2022.139751] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
|
22
|
Pebax-based membrane filled with photo-responsive Azo@NH2-MIL-53 nanoparticles for efficient SO2/N2 separation. Sep Purif Technol 2022. [DOI: 10.1016/j.seppur.2022.121363] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/22/2022]
|
23
|
Ebadi Amooghin A, Sanaeepur H, Luque R, Garcia H, Chen B. Fluorinated metal-organic frameworks for gas separation. Chem Soc Rev 2022; 51:7427-7508. [PMID: 35920324 DOI: 10.1039/d2cs00442a] [Citation(s) in RCA: 26] [Impact Index Per Article: 13.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/21/2022]
Abstract
Fluorinated metal-organic frameworks (F-MOFs) as fast-growing porous materials have revolutionized the field of gas separation due to their tunable pore apertures, appealing chemical features, and excellent stability. A deep understanding of their structure-performance relationships is critical for the synthesis and development of new F-MOFs. This critical review has focused on several strategies for the precise design and synthesis of new F-MOFs with structures tuned for specific gas separation purposes. First, the basic principles and concepts of F-MOFs as well as their structure, synthesis and modification and their structure to property relationships are studied. Then, applications of F-MOFs in adsorption and membrane gas separation are discussed. A detailed account of the design and capabilities of F-MOFs for the adsorption of various gases and the governing principles is provided. In addition, the exceptional characteristics of highly stable F-MOFs with engineered pore size and tuned structures are put into perspective to fabricate selective membranes for gas separation. Systematic analysis of the position of F-MOFs in gas separation revealed that F-MOFs are benchmark materials in most of the challenging gas separations. The outlook and future directions of the science and engineering of F-MOFs and their challenges are highlighted to tackle the issues of overcoming the trade-off between capacity/permeability and selectivity for a serious move towards industrialization.
Collapse
Affiliation(s)
- Abtin Ebadi Amooghin
- Department of Chemical Engineering, Faculty of Engineering, Arak University, Arak 38156-8-8349, Iran.
| | - Hamidreza Sanaeepur
- Department of Chemical Engineering, Faculty of Engineering, Arak University, Arak 38156-8-8349, Iran.
| | - Rafael Luque
- Department of Organic Chemistry, University of Cordoba, Campus de Rabanales, Edificio Marie Curie (C-3), Ctra Nnal IV-A, Km 396, E14014 Cordoba, Spain. .,Peoples' Friendship University of Russia (RUDN University), 6 Miklukho-Maklaya Str., 117198, Moscow, Russian Federation
| | - Hermenegildo Garcia
- Instituto de Tecnología Química CSIC-UPV, Universitat Politècnica de València, Consejo Superior de Investigaciones Científicas, Av. de los Naranjos s/n, Valencia 46022, Spain.
| | - Banglin Chen
- Department of Chemistry, University of Texas at San Antonio, One UTSA Circle, San Antonio, Texas, 78249-0698, USA.
| |
Collapse
|
24
|
Wang S, Wei X, Li Z, Liu Y, Wang H, Zou L, Lu D, Hassan Akhtar F, Wang X, Wu C, Luo S. Recent advances in developing mixed matrix membranes based on covalent organic frameworks. Sep Purif Technol 2022. [DOI: 10.1016/j.seppur.2022.122004] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/31/2022]
|
25
|
Incorporating KAUST-7 into PIM-1 towards mixed matrix membranes with long-term stable CO2/CH4 separation performance. J Memb Sci 2022. [DOI: 10.1016/j.memsci.2022.120848] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/18/2022]
|
26
|
Enhanced ethylene transport of mixed-matrix membranes by incorporating anion-pillared hybrid ultramicroporous materials via in situ growth. Sep Purif Technol 2022. [DOI: 10.1016/j.seppur.2022.121804] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
|
27
|
Datta SJ, Mayoral A, Murthy Srivatsa Bettahalli N, Bhatt PM, Karunakaran M, Carja ID, Fan D, Graziane M Mileo P, Semino R, Maurin G, Terasaki O, Eddaoudi M. Rational design of mixed-matrix metal-organic framework membranes for molecular separations. Science 2022; 376:1080-1087. [PMID: 35653472 DOI: 10.1126/science.abe0192] [Citation(s) in RCA: 90] [Impact Index Per Article: 45.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/12/2023]
Abstract
Conventional separation technologies to separate valuable commodities are energy intensive, consuming 15% of the worldwide energy. Mixed-matrix membranes, combining processable polymers and selective adsorbents, offer the potential to deploy adsorbent distinct separation properties into processable matrix. We report the rational design and construction of a highly efficient, mixed-matrix metal-organic framework membrane based on three interlocked criteria: (i) a fluorinated metal-organic framework, AlFFIVE-1-Ni, as a molecular sieve adsorbent that selectively enhances hydrogen sulfide and carbon dioxide diffusion while excluding methane; (ii) tailoring crystal morphology into nanosheets with maximally exposed (001) facets; and (iii) in-plane alignment of (001) nanosheets in polymer matrix and attainment of [001]-oriented membrane. The membrane demonstrated exceptionally high hydrogen sulfide and carbon dioxide separation from natural gas under practical working conditions. This approach offers great potential to translate other key adsorbents into processable matrix.
Collapse
Affiliation(s)
- Shuvo Jit Datta
- Division of Physical Science and Engineering, Advanced Membrane and Porous Materials Center, King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Kingdom of Saudi Arabia.,Division of Physical Science and Engineering, Advanced Membrane and Porous Materials Center, Functional Materials Design, Discovery and Development (FMD3), KAUST, Thuwal 23955-6900, Kingdom of Saudi Arabia
| | - Alvaro Mayoral
- Centre for High-Resolution Electron Microscopy, School of Physical Science and Technology, ShanghaiTech University, Shanghai 201210, China.,Shanghai Key Laboratory of High-Resolution Electron Microscopy, ShanghaiTech University, Shanghai 201210, China.,Instituto de Nanociencia y Materiales de Aragon, CSIC - Universidad de Zaragoza, Laboratorio de Microscopias Avanzadas, 50009 Zaragoza, Spain
| | - Narasimha Murthy Srivatsa Bettahalli
- Division of Physical Science and Engineering, Advanced Membrane and Porous Materials Center, King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Kingdom of Saudi Arabia
| | - Prashant M Bhatt
- Division of Physical Science and Engineering, Advanced Membrane and Porous Materials Center, King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Kingdom of Saudi Arabia.,Division of Physical Science and Engineering, Advanced Membrane and Porous Materials Center, Functional Materials Design, Discovery and Development (FMD), KAUST, Thuwal 23955-6900, Kingdom of Saudi Arabia
| | - Madhavan Karunakaran
- Division of Physical Science and Engineering, Advanced Membrane and Porous Materials Center, King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Kingdom of Saudi Arabia
| | - Ionela Daniela Carja
- Division of Physical Science and Engineering, Advanced Membrane and Porous Materials Center, Functional Materials Design, Discovery and Development (FMD), KAUST, Thuwal 23955-6900, Kingdom of Saudi Arabia
| | - Dong Fan
- Institut Charles Gerhardt Montpellier (ICGM), University of Montpellier, CNRS, ENSCM, 34095 Montpellier, France
| | - Paulo Graziane M Mileo
- Institut Charles Gerhardt Montpellier (ICGM), University of Montpellier, CNRS, ENSCM, 34095 Montpellier, France
| | - Rocio Semino
- Institut Charles Gerhardt Montpellier (ICGM), University of Montpellier, CNRS, ENSCM, 34095 Montpellier, France
| | - Guillaume Maurin
- Institut Charles Gerhardt Montpellier (ICGM), University of Montpellier, CNRS, ENSCM, 34095 Montpellier, France
| | - Osamu Terasaki
- Centre for High-Resolution Electron Microscopy, School of Physical Science and Technology, ShanghaiTech University, Shanghai 201210, China.,Shanghai Key Laboratory of High-Resolution Electron Microscopy, ShanghaiTech University, Shanghai 201210, China
| | - Mohamed Eddaoudi
- Division of Physical Science and Engineering, Advanced Membrane and Porous Materials Center, King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Kingdom of Saudi Arabia.,Division of Physical Science and Engineering, Advanced Membrane and Porous Materials Center, Functional Materials Design, Discovery and Development (FMD), KAUST, Thuwal 23955-6900, Kingdom of Saudi Arabia
| |
Collapse
|
28
|
Hydrogen Sulfide Capture and Removal Technologies: A Comprehensive Review of Recent Developments and Emerging Trends. Sep Purif Technol 2022. [DOI: 10.1016/j.seppur.2022.121448] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
|
29
|
Zhai X, Han J, Shao L, Fu Y, Chen J. Construction of a Hierarchical Structure of Bimetallic Oxide Derived from Metal-Organic Frameworks. Inorg Chem 2022; 61:8043-8052. [PMID: 35543510 DOI: 10.1021/acs.inorgchem.2c00893] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/05/2023]
Abstract
Bimetallic oxides are a class of promising advanced functional metal nanomaterials, especially in terms of the sophisticated hierarchical structure of bimetallic oxide, which not only is in favor of enhancing their intrinsic physiochemical properties because of more accessible actives sites but also is capable of integrating the synergistic effect between two metals. Herein, we report a novel strategy to controllably construct bimetallic CuO/ZnO nanomaterials with sophisticated hierarchical structure through a pseudomorphic transformation and subsequent calcination process. The resulting unique hierarchical structure of ZnO/CuO is primarily constituted of a nanosphere and a rod grafted in a microscale cube with multidimensional size, which thus results in excellent dispersion, superior charge-transport capability, and abundant accessible active sites. Impressively, the optimized hierarchical structure product of CuO/ZnO (4:1) demonstrates an excellent glucose detection performance with a rapid response time, a wide linear range, a low detection limit, and strong antiinterference ability, realizing more advantages than commercial CuO or ZnO materials and shedding light on the positive correlation of the structure and performance. This study provides a new strategy for the controllable fabrication of the sophisticated hierarchical structure of bimetallic oxide nanomaterials.
Collapse
Affiliation(s)
- Xu Zhai
- College of Chemistry and Chemical Engineering, Tarim University, Alaer 843300, China.,Department of Chemistry, College of Sciences, Northeastern University, Shenyang 110819, China
| | - Jingrui Han
- Department of Chemistry, College of Sciences, Northeastern University, Shenyang 110819, China
| | - Lei Shao
- Department of Chemistry, College of Sciences, Northeastern University, Shenyang 110819, China
| | - Yu Fu
- Department of Chemistry, College of Sciences, Northeastern University, Shenyang 110819, China
| | - Junyi Chen
- College of Chemistry and Chemical Engineering, Tarim University, Alaer 843300, China
| |
Collapse
|
30
|
Goh SH, Lau HS, Yong WF. Metal-Organic Frameworks (MOFs)-Based Mixed Matrix Membranes (MMMs) for Gas Separation: A Review on Advanced Materials in Harsh Environmental Applications. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2022; 18:e2107536. [PMID: 35224843 DOI: 10.1002/smll.202107536] [Citation(s) in RCA: 20] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/04/2021] [Revised: 01/27/2022] [Indexed: 06/14/2023]
Abstract
The booming of global environmental awareness has driven the scientific community to search for alternative sustainable approaches. This is accentuated in the 13th sustainable development goal (SDG13), climate action, where urgent efforts are salient in combating the drastic effects of climate change. Membrane separation is one of the indispensable gas purification technologies that effectively reduces the carbon footprint and is energy-efficient for large-scale integration. Metal-organic frameworks (MOFs) are recognized as promising fillers embedded in mixed matrix membranes (MMMs) to enhance gas separation performance. Tremendous research studies on MOFs-based MMMs have been conducted. Herein, this review offers a critical summary of the MOFs-based MMMs developed in the past 3 years. The basic models to estimate gas transport, preparation methods, and challenges in developing MMMs are discussed. Subsequently, the application and separation performance of a variety of MOFs-based MMMs including those of advanced MOFs materials are summarized. To accommodate industrial needs and resolve commercialization hurdles, the latest exploration of MOF materials for a harsh operating condition is emphasized. Along with the contemplation on the outlook, future perspective, and opportunities of MMMs, it is anticipated that this review will serve as a stepping stone for the coming MMMs research on sustainable and benign environmental application.
Collapse
Affiliation(s)
- Shu Hua Goh
- School of Energy and Chemical Engineering, Xiamen University Malaysia, Selangor Darul Ehsan, 43900, Malaysia
| | - Hui Shen Lau
- School of Energy and Chemical Engineering, Xiamen University Malaysia, Selangor Darul Ehsan, 43900, Malaysia
| | - Wai Fen Yong
- School of Energy and Chemical Engineering, Xiamen University Malaysia, Selangor Darul Ehsan, 43900, Malaysia
- College of Chemistry and Chemical Engineering, Xiamen University, Xiamen, Fujian, 361005, China
| |
Collapse
|
31
|
Zhang G, Zhu Q, Zhang W, Zheng Y, Cao Y, Liang S, Xiao Y, Liu F, Jiang L. Efficiently Integrated Desulfurization from Natural Gas over Zn-ZIF-Derived Hierarchical Lamellar Carbon Frameworks. Inorg Chem 2022; 61:6083-6093. [PMID: 35404597 DOI: 10.1021/acs.inorgchem.2c00149] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
Selective removal of carbonyl sulfide (COS) and hydrogen sulfide (H2S) is the key step for natural gas desulfurization due to the highly toxic and corrosive features of these gaseous sulfides, and efficient and stable desulfurizers are urgently needed in the industry. Herein, we report a class of nitrogen-functionalized, hierarchically lamellar carbon frameworks (N-HLCF-xs), which are obtained from the structural transformation of Zn zeolitic imidazolate frameworks via controllable carbonization. The N-HLCF-xs possess the desirable characteristics of large Brunauer-Emmett-Teller surface areas (645-923 m2/g), combined primary three-dimensional microporosity and secondary two-dimensional lamellar microstructure, and high density of nitrogen base sites with enhanced pyridine ratio (17.52 wt %, 59.91%). The anchored nitrogen base sites in N-HLCF-xs show improved accessibility, which boosts their interaction with acidic COS and H2S. As expected, N-HLCF-xs can be employed as multifunctional and efficient desulfurizers for selective removal of COS and H2S from natural gas. COS was first transformed into H2S via catalytic hydrolysis, and the produced H2S was then captured and separated and catalyzed oxidation into elemental sulfur. The above continuous processes can be achieved with solo N-HLCF-xs, giving extremely high efficiencies and reusability. Their integrated desulfurization performance was better than many desulfurizers used in the area, such as activated carbon, β zeolite, MIL-101(Fe), K2CO3/γ-Al2O3, and FeOx/TiO2.
Collapse
Affiliation(s)
- Guanqing Zhang
- National Engineering Research Center of Chemical Fertilizer Catalyst, College of Chemical Engineering, Fuzhou University, Fuzhou, Fujian 350002, P.R. China
| | - Qiliang Zhu
- National Engineering Research Center of Chemical Fertilizer Catalyst, College of Chemical Engineering, Fuzhou University, Fuzhou, Fujian 350002, P.R. China
| | - Wentao Zhang
- National Engineering Research Center of Chemical Fertilizer Catalyst, College of Chemical Engineering, Fuzhou University, Fuzhou, Fujian 350002, P.R. China
| | - Yong Zheng
- National Engineering Research Center of Chemical Fertilizer Catalyst, College of Chemical Engineering, Fuzhou University, Fuzhou, Fujian 350002, P.R. China.,Qingyuan Innovation Laboratory, Quanzhou, Fujian 362801, P.R. China
| | - Yanning Cao
- National Engineering Research Center of Chemical Fertilizer Catalyst, College of Chemical Engineering, Fuzhou University, Fuzhou, Fujian 350002, P.R. China.,Qingyuan Innovation Laboratory, Quanzhou, Fujian 362801, P.R. China
| | - Shijing Liang
- National Engineering Research Center of Chemical Fertilizer Catalyst, College of Chemical Engineering, Fuzhou University, Fuzhou, Fujian 350002, P.R. China.,Qingyuan Innovation Laboratory, Quanzhou, Fujian 362801, P.R. China
| | - Yihong Xiao
- National Engineering Research Center of Chemical Fertilizer Catalyst, College of Chemical Engineering, Fuzhou University, Fuzhou, Fujian 350002, P.R. China.,Qingyuan Innovation Laboratory, Quanzhou, Fujian 362801, P.R. China
| | - Fujian Liu
- National Engineering Research Center of Chemical Fertilizer Catalyst, College of Chemical Engineering, Fuzhou University, Fuzhou, Fujian 350002, P.R. China.,Qingyuan Innovation Laboratory, Quanzhou, Fujian 362801, P.R. China
| | - Lilong Jiang
- National Engineering Research Center of Chemical Fertilizer Catalyst, College of Chemical Engineering, Fuzhou University, Fuzhou, Fujian 350002, P.R. China.,Qingyuan Innovation Laboratory, Quanzhou, Fujian 362801, P.R. China
| |
Collapse
|
32
|
Feng X, Peng D, Shan M, Niu X, Zhang Y. Facilitated propylene transport in mixed matrix membranes containing
ZIF
‐8@Agmim core‐shell hybrid material. AIChE J 2022. [DOI: 10.1002/aic.17707] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Affiliation(s)
- Xiaoquan Feng
- School of Chemical Engineering Zhengzhou University Zhengzhou China
| | - Donglai Peng
- School of Chemical Engineering Zhengzhou University Zhengzhou China
- School of Material & Chemical Engineering Zhengzhou University of Light Industry Zhengzhou China
| | - Meixia Shan
- School of Chemical Engineering Zhengzhou University Zhengzhou China
| | - Xinpu Niu
- School of Chemical Engineering Zhengzhou University Zhengzhou China
| | - Yatao Zhang
- School of Chemical Engineering Zhengzhou University Zhengzhou China
| |
Collapse
|
33
|
Lv J, Zhou X, Yang J, Wang L, Lu J, He G, Dong Y. In-situ synthesis of KAUST-7 membranes from fluorinated molecular building block for H2/CO2 separation. J Memb Sci 2022. [DOI: 10.1016/j.memsci.2022.120585] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/18/2022]
|
34
|
Sun Y, Tian L, Qiao Z, Geng C, Guo X, Zhong C. Surface modification of bilayer structure on metal-organic frameworks towards mixed matrix membranes for efficient propylene/propane separation. J Memb Sci 2022. [DOI: 10.1016/j.memsci.2022.120350] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/02/2023]
|
35
|
Zhao D, Yu S, Jiang WJ, Cai ZH, Li DL, Liu YL, Chen ZZ. Recent Progress in Metal-Organic Framework Based Fluorescent Sensors for Hazardous Materials Detection. Molecules 2022; 27:2226. [PMID: 35408627 PMCID: PMC9000234 DOI: 10.3390/molecules27072226] [Citation(s) in RCA: 19] [Impact Index Per Article: 9.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/14/2022] [Revised: 03/16/2022] [Accepted: 03/23/2022] [Indexed: 12/04/2022] Open
Abstract
Population growth and industrial development have exacerbated environmental pollution of both land and aquatic environments with toxic and harmful materials. Luminescence-based chemical sensors crafted for specific hazardous substances operate on host-guest interactions, leading to the detection of target molecules down to the nanomolar range. Particularly, the luminescence-based sensors constructed on the basis of metal-organic frameworks (MOFs) are of increasing interest, as they can not only compensate for the shortcomings of traditional detection techniques, but also can provide more sensitive detection for analytes. Recent years have seen MOFs-based fluorescent sensors show outstanding advantages in the field of hazardous substance identification and detection. Here, we critically discuss the application of MOFs for the detection of a broad scope of hazardous substances, including hazardous gases, heavy metal ions, radioactive ions, antibiotics, pesticides, nitro-explosives, and some harmful solvents as well as luminous and sensing mechanisms of MOF-based fluorescent sensors. The outlook and several crucial issues of this area are also discussed, with the expectation that it may help arouse widespread attention on exploring fluorescent MOFs (LMOFs) in potential sensing applications.
Collapse
Affiliation(s)
- Dan Zhao
- School of Marine Science, Ningbo University, Ningbo 315211, China; (W.-J.J.); (Z.-H.C.)
| | - Shuang Yu
- Department of Food Science and Engineering, Ningbo University, Ningbo 315211, China;
| | - Wen-Jie Jiang
- School of Marine Science, Ningbo University, Ningbo 315211, China; (W.-J.J.); (Z.-H.C.)
| | - Zhi-Hao Cai
- School of Marine Science, Ningbo University, Ningbo 315211, China; (W.-J.J.); (Z.-H.C.)
| | - Dan-Li Li
- College of Electrical and Electronic Engineering, Wenzhou University, Wenzhou 325035, China;
| | - Ya-Lan Liu
- Department of Food Science and Engineering, Ningbo University, Ningbo 315211, China;
| | - Zhi-Zhou Chen
- College of Electrical and Electronic Engineering, Wenzhou University, Wenzhou 325035, China;
| |
Collapse
|
36
|
Chen X, Chen G, Liu G, Liu G, Jin W. UTSA
‐280 metal–organic framework incorporated
6FDA
‐polyimide mixed‐matrix membranes for ethylene/ethane separation. AIChE J 2022. [DOI: 10.1002/aic.17688] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Affiliation(s)
- Xi Chen
- State Key Laboratory of Materials‐Oriented Chemical Engineering, College of Chemical Engineering Nanjing Tech University Nanjing China
| | - Guining Chen
- State Key Laboratory of Materials‐Oriented Chemical Engineering, College of Chemical Engineering Nanjing Tech University Nanjing China
| | - Guozhen Liu
- State Key Laboratory of Materials‐Oriented Chemical Engineering, College of Chemical Engineering Nanjing Tech University Nanjing China
| | - Gongping Liu
- State Key Laboratory of Materials‐Oriented Chemical Engineering, College of Chemical Engineering Nanjing Tech University Nanjing China
| | - Wanqin Jin
- State Key Laboratory of Materials‐Oriented Chemical Engineering, College of Chemical Engineering Nanjing Tech University Nanjing China
| |
Collapse
|
37
|
Zheng X, Shen L, Lin F, Xu Y, Lin Q, Jiang L. Bimetallic Metal-Organic Frameworks MIL-53( xAl- yFe) as Efficient Catalysts for H 2S Selective Oxidation. Inorg Chem 2022; 61:3774-3784. [PMID: 35167267 DOI: 10.1021/acs.inorgchem.2c00048] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
Catalytic oxidation of H2S is a crucial green pathway that can fully convert H2S into value-added elemental S for commercial use. However, achieving high catalytic stability and S selectivity by traditional-metal-based catalysts still remain a major challenge. Herein, a facile one-step solvothermal strategy is designed for the fabrication of bimetallic MIL-53(xAl-yFe) catalysts. The as-synthesized MIL-53(1Al-5Fe) possesses ample coordinatively unsaturated metal sites, which served as efficient catalytic sites for the selective oxidation of H2S. As a result, the representative MIL-53(1Al-5Fe) achieves a S yield of nearly 100% at 100-160 °C with almost no obvious decrease of catalytic stability in the run of 30 h. Under the defined reaction conditions, the bimetallic metal-organic frameworks are obviously superior to MIL-53(Al) (49.3%) and MIL-53(Fe) (70.5%) in S yield. This study suggests that the introduction of elemental Al into MIL-53(xAl-yFe) could effectively modulate the electronic properties and spatial configuration of the catalysts, further conducing the adsorption and activation of H2S and thus accelerating the dissociation of H2S into a key intermediate S* and improving their catalytic performance.
Collapse
Affiliation(s)
- Xiaoxiao Zheng
- College of Materials and Chemical Engineering, Minjiang University, Fuzhou 350108, Fujian, P. R. China.,Fujian Engineering and Research Center of New Chinese Lacquer Materials, Fuzhou 350108, Fujian, P. R. China.,National Engineering Research Center of Chemical Fertilizer Catalyst, Fuzhou University, Fuzhou 350002, Fujian, P. R. China
| | - Lijuan Shen
- Fujian Key Laboratory of Pollution Control & Resource Reuse, College of Environmental Science and Engineering, Fujian Normal University, Fuzhou 350007, Fujian, P. R. China
| | - Fengcai Lin
- College of Materials and Chemical Engineering, Minjiang University, Fuzhou 350108, Fujian, P. R. China.,Fujian Engineering and Research Center of New Chinese Lacquer Materials, Fuzhou 350108, Fujian, P. R. China
| | - Yanlian Xu
- College of Materials and Chemical Engineering, Minjiang University, Fuzhou 350108, Fujian, P. R. China.,Fujian Engineering and Research Center of New Chinese Lacquer Materials, Fuzhou 350108, Fujian, P. R. China
| | - Qi Lin
- College of Materials and Chemical Engineering, Minjiang University, Fuzhou 350108, Fujian, P. R. China.,Fujian Engineering and Research Center of New Chinese Lacquer Materials, Fuzhou 350108, Fujian, P. R. China
| | - Lilong Jiang
- National Engineering Research Center of Chemical Fertilizer Catalyst, Fuzhou University, Fuzhou 350002, Fujian, P. R. China
| |
Collapse
|
38
|
Khakbaz F, Mirzaei M, Mahani M. Enhanced adsorption of crystal violet using Bi 3+ – intercalated Cd-MOF: isotherm, kinetic and thermodynamic study. PARTICULATE SCIENCE AND TECHNOLOGY 2022. [DOI: 10.1080/02726351.2022.2032890] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/19/2022]
Affiliation(s)
- Faeze Khakbaz
- Department of Chemistry, Shahid Bahonar University, Kerman, Iran
| | - Mohammad Mirzaei
- Department of Chemistry, Shahid Bahonar University, Kerman, Iran
| | - Mohamad Mahani
- Department of Chemistry, Faculty of Chemistry and Chemical Engineering, Graduate University of Advanced Technology, Kerman, Iran
| |
Collapse
|
39
|
Li T, Zhu H, Yu Z, Shi N, Ma Q, Yu J, Ren H, Pan Y, Liu Y, Guo W. Promotion effects of Ni-doping on H2S removal and ZnO initial sulfuration over ZnO nanowire by first-principle study. MOLECULAR CATALYSIS 2022. [DOI: 10.1016/j.mcat.2022.112148] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/19/2022]
|
40
|
Lv J, Cui Y, Yang J, Li L, Zhou X, Lu J, He G. Inorganic Pillar Center-Facilitated Counterdiffusion Synthesis for Highly H 2 Perm-Selective KAUST-7 Membranes. ACS APPLIED MATERIALS & INTERFACES 2022; 14:4297-4306. [PMID: 35016503 DOI: 10.1021/acsami.1c21077] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Fluorinated metal-organic framework materials (NbOFFIVE-1-Ni, also referred to as KAUST-7) have attracted widespread attention because of their high chemical stability and thermal stability, outstanding tolerance with water and H2S, and high CO2-adsorption selectivity over H2 and CH4. KAUST-7 was expected to be a new membrane material candidate for H2/CO2 separation because of the hindered permeation of CO2 resulting from the interaction between CO2 and (NbOF5)2- of the KAUST-7 framework. A highly H2 perm-selective KAUST-7 membrane was first achieved using a novel strategy of inorganic pillar center-facilitated counterdiffusion (IPCFCD) proposed by us. The IPCFCD method not only effectively avoided the corrosion of hydrofluoric acid to α-Al2O3 tubes in the process of preparing KAUST-7 membranes, but also better reduced grain boundary defects because of the faster nucleation rate and resultant high crystallinity. The KAUST-7 membrane exhibited a high H2/CO2 separation factor (SF) of 27.30 for the 1:1 H2/CO2 binary gas mixture with a high H2 permeance of 5.30 × 10-7 mol m-2 s-1 Pa-1 under ambient conditions and a slight decrease of the H2/CO2 SF with increasing operation temperature and presence of steam. This study highlighted the importance of pre-synthesizing inorganic pillar centers (NiNbOF5 intermediate) and the innovation of a membrane formation process for synthesizing polycrystalline KAUST-7 membranes. Most important of all, our study provided a novel approach to overcome the challenge in fabricating metal-organic framework membranes containing corrosive reactants for the corresponding supports.
Collapse
Affiliation(s)
- Jinyin Lv
- State Key Laboratory of Fine Chemicals, Institute of Adsorption and Inorganic Membrane, School of Chemical Engineering, Dalian University of Technology, Dalian 116024, P. R. China
| | - Yanwen Cui
- State Key Laboratory of Fine Chemicals, Institute of Adsorption and Inorganic Membrane, School of Chemical Engineering, Dalian University of Technology, Dalian 116024, P. R. China
| | - Jianhua Yang
- State Key Laboratory of Fine Chemicals, Institute of Adsorption and Inorganic Membrane, School of Chemical Engineering, Dalian University of Technology, Dalian 116024, P. R. China
| | - Liangqing Li
- Laboratory of Functional Materials, School of Chemistry and Chemical Engineering, Huangshan University, Huangshan 245041, P. R. China
| | - Xuerong Zhou
- Shandong Applied Research Center for Gold Nanotechnology (Au-SDARC), School of Chemistry and Chemical Engineering, Yantai University, Yantai 264005, P. R. China
| | - Jinming Lu
- State Key Laboratory of Fine Chemicals, Institute of Adsorption and Inorganic Membrane, School of Chemical Engineering, Dalian University of Technology, Dalian 116024, P. R. China
| | - Gaohong He
- State Key Laboratory of Fine Chemicals, Institute of Adsorption and Inorganic Membrane, School of Chemical Engineering, Dalian University of Technology, Dalian 116024, P. R. China
| |
Collapse
|
41
|
Jeong Y, Kim S, Lee M, Hong S, Jang MG, Choi N, Hwang KS, Baik H, Kim JK, Yip ACK, Choi J. A Hybrid Zeolite Membrane-Based Breakthrough for Simultaneous CO 2 Capture and CH 4 Upgrading from Biogas. ACS APPLIED MATERIALS & INTERFACES 2022; 14:2893-2907. [PMID: 34985249 DOI: 10.1021/acsami.1c21277] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Biogas is an environmentally friendly and sustainable energy resource that can substitute or complement conventional fossil fuels. For practical uses, biogas upgrading, mainly through the effective separation of CO2 (0.33 nm) and CH4 (0.38 nm), is required to meet the approximately 90-95% purity of CH4, while CO2 should be concomitantly purified. In this study, a high CO2 perm-selective zeolite membrane was synthesized by heteroepitaxially growing a chabazite (CHA) zeolite seed layer with a synthetic precursor that allowed the formation of all-silica deca-dodecasil 3 rhombohedral (DDR) zeolite (with a pore size of 0.36 × 0.44 nm2). The resulting hydrophobic DDR@CHA hybrid membrane on an asymmetric α-Al2O3 tube was thin (ca. 2 μm) and continuous, thus providing both high flux and permselectivity for CO2 irrespective of the presence or absence of water vapor (the third largest component in the biogas streams). To the best of our knowledge, the CO2 permeance of (2.9 ± 0.3) × 10-7 mol m-2 s-1 Pa-1 and CO2/CH4 separation factor of ca. 274 ± 73 at a saturated water vapor partial pressure of ca. 12 kPa at 50 °C have the highest CO2/CH4 separation performance yet achieved. Furthermore, we explored the membrane module properties of the hybrid membrane in terms of the recovery and purity of both CO2 and CH4 under dry and wet conditions. Despite the high intrinsic membrane properties of the current hybrid membrane, reflected by the high permeance and SF, the corresponding module properties indicated that high-performance separation of CO2 and CH4 for the desired biogas upgrading was achieved at a limited processing capacity. This supports the importance of understanding the correlation between the membrane and module properties, as this will provide guidance for the optimal operating conditions.
Collapse
Affiliation(s)
- Yanghwan Jeong
- Department of Chemical & Biological Engineering, College of Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul 02841, Republic of Korea
| | - Sejin Kim
- Department of Chemical & Biological Engineering, College of Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul 02841, Republic of Korea
| | - Minseong Lee
- Department of Chemical & Biological Engineering, College of Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul 02841, Republic of Korea
| | - Sungwon Hong
- Department of Chemical & Biological Engineering, College of Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul 02841, Republic of Korea
| | - Mun-Gi Jang
- Department of Chemical Engineering, College of Engineering, Hanyang University, 222 Wangsimni-ro, Seongdong-gu, Seoul 04763, Republic of Korea
| | - Nakwon Choi
- Center for BioMicrosystems, Brain Science Institute, Korea Institute of Science and Technology (KIST), Hwarang-ro 14-gil, Seongbuk-gu, Seoul 02792, Republic of Korea
- KU-KIST Graduate School of Converging Science and Technology, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul 02841, Republic of Korea
| | - Kyo Seon Hwang
- Department of Clinical Pharmacology and Therapeutics, College of Medicine, Kyung Hee University, Seoul 02447, Republic of Korea
| | - Hionsuck Baik
- Korea Basic Science Institute (KBSI), Seoul Center, 145 Anam-ro, Seongbuk-gu, Seoul 02841, Republic of Korea
| | - Jin-Kuk Kim
- Department of Chemical Engineering, College of Engineering, Hanyang University, 222 Wangsimni-ro, Seongdong-gu, Seoul 04763, Republic of Korea
| | - Alex C K Yip
- Department of Chemical and Process Engineering, University of Canterbury, Christchurch 8140, New Zealand
| | - Jungkyu Choi
- Department of Chemical & Biological Engineering, College of Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul 02841, Republic of Korea
| |
Collapse
|
42
|
Dzumbira W, Ali N, Duanmu C, Yang Y, Khan A, Ali F, Bilal M, Aleya L, Iqbal HMN. Separation and remediation of environmental pollutants using metal-organic framework-based tailored materials. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2022; 29:4822-4842. [PMID: 34787811 DOI: 10.1007/s11356-021-17446-x] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/20/2021] [Accepted: 11/05/2021] [Indexed: 02/08/2023]
Abstract
Metal-organic frameworks (MOFs) are a polymer hybrid family of compounds comprising metal ions that have been deliberately incorporated in organic ligands to form several multi-dimensional structures with unique structural and functional attributes. They have the typical properties of brittleness, major porosity, and randomly crystalline. These three factors hampered their potential incorporation into modern technologies. However, with the discovery of their polymers, hope was rekindled. Polymers, unlike their counterparts, are versatile and malleable and can be tailored into solids with a wide range of technical applications. MOFs can be effectively incorporated into polymer structures, resulting in polymers with enhanced properties and increased demand, according to recent studies. This review focuses on the synthetic procedures of MOFs used to create hybrid materials, as well as their potential environmentally related applications. Desalination, hazardous heavy metal removal and mitigation, gas and liquid separations and purifications, and dye removal will all be extensively discussed as applications. To assemble this review, we will add insight from recent papers and discoveries, as well as seminal reports from experts on the advancement of MOF-polymers.
Collapse
Affiliation(s)
- Walter Dzumbira
- Key Laboratory of Regional Resource Exploitation and Medicinal Research, Faculty of Chemical Engineering, Huaiyin Institute of Technology, Huai'an, Jiangsu Province, People's Republic of China
| | - Nisar Ali
- Key Laboratory of Regional Resource Exploitation and Medicinal Research, Faculty of Chemical Engineering, Huaiyin Institute of Technology, Huai'an, Jiangsu Province, People's Republic of China.
| | - Chuansong Duanmu
- Key Laboratory of Regional Resource Exploitation and Medicinal Research, Faculty of Chemical Engineering, Huaiyin Institute of Technology, Huai'an, Jiangsu Province, People's Republic of China
| | - Yong Yang
- Key Laboratory of Regional Resource Exploitation and Medicinal Research, Faculty of Chemical Engineering, Huaiyin Institute of Technology, Huai'an, Jiangsu Province, People's Republic of China
| | - Adnan Khan
- Institute of Chemical Sciences, University of Peshawar, Khyber Pakhtunkhwa, Peshawar, 25120, Pakistan
| | - Farman Ali
- Department of Chemistry, Hazara University, KPK, Mansehra, 21300, Pakistan
| | - Muhammad Bilal
- School of Life Science and Food Engineering, Huaiyin Institute of Technology, Huai'an, 223003, China.
| | - Lotfi Aleya
- Chrono-Environment Laboratory, UMR CNRS 6249, Bourgogne Franche-Comté University, Besançon, France
| | - Hafiz M N Iqbal
- Tecnologico de Monterrey, School of Engineering and Sciences, 64849, Monterrey, Mexico.
| |
Collapse
|
43
|
Shah HUR, Ahmad K, Bashir MS, Shah SSA, Najam T, Ashfaq M. Metal organic frameworks for efficient catalytic conversion of CO2 and CO into applied products. MOLECULAR CATALYSIS 2022. [DOI: 10.1016/j.mcat.2021.112055] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/07/2023]
|
44
|
Prasetya N, Himma NF, Sutrisna PD, Wenten IG. Recent advances in dual-filler mixed matrix membranes. REV CHEM ENG 2021. [DOI: 10.1515/revce-2021-0014] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
Abstract
Abstract
Mixed matrix membranes (MMMs) have been widely developed as an attractive solution to overcome the drawbacks found in most polymer membranes, such as permeability-selectivity trade-off and low physicochemical stability. Numerous fillers based on inorganic, organic, and hybrid materials with various structures including porous or nonporous, and two-dimensional or three-dimensional, have been used. Demanded to further improve the characteristics and performances of the MMMs, the use of dual-filler instead of a single filler has then been proposed, from which multiple effects could be obtained. This article aims to review the recent development of MMMs with dual filler and discuss their performances in diverse potential applications. Challenges in this emerging field and outlook for future research are finally provided.
Collapse
Affiliation(s)
- Nicholaus Prasetya
- Research Centre for Nanoscience and Nanotechnology, Institut Teknologi Bandung , Jalan Ganesha 10 , Bandung 40132 , Indonesia
- Department of Chemical Engineering , Barrer Centre, Imperial College London , Exhibition Road , London SW7 2AZ , UK
| | - Nurul Faiqotul Himma
- Department of Chemical Engineering , Universitas Brawijaya , Jalan Mayjen Haryono 167 , Malang 65145 , Indonesia
| | - Putu Doddy Sutrisna
- Department of Chemical Engineering , Universitas Surabaya , Jalan Raya Kalirungkut (Tenggilis) , Surabaya 60293 , Indonesia
| | - I Gede Wenten
- Research Centre for Nanoscience and Nanotechnology, Institut Teknologi Bandung , Jalan Ganesha 10 , Bandung 40132 , Indonesia
- Department of Chemical Engineering , Institut Teknologi Bandung , Jalan Ganesha 10 , Bandung 40132 , Indonesia
| |
Collapse
|
45
|
|
46
|
Zhang B, Bai J, Zhang Y, Zhou C, Wang P, Zha L, Li J, Simchi A, Zhou B. High Yield of CO and Synchronous S Recovery from the Conversion of CO 2 and H 2S in Natural Gas Based on a Novel Electrochemical Reactor. ENVIRONMENTAL SCIENCE & TECHNOLOGY 2021; 55:14854-14862. [PMID: 34634907 DOI: 10.1021/acs.est.1c04414] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
H2S and CO2 are the main impurities in raw natural gas, which needs to be purified before use. However, the comprehensive utilization of H2S and CO2 has been ignored. Herein, we proposed a fully resource-based method to convert toxic gas H2S and greenhouse gas CO2 synchronously into CO and elemental S by using a novel electrochemical reactor. The special designs include that, in the anodic chamber, H2S was oxidized rapidly to S based on the I-/I3- cyclic redox system to avoid anode passivation. On the other hand, in the cathodic chamber, CO2 was rapidly and selectively reduced to CO based on a porous carbon gas diffusion electrode (GDE) modified with polytetrafluoroethylene and cobalt phthalocyanine (CoPc). A high Faraday efficiency (>95%) toward CO was achieved due to the enhanced mass transfer of CO2 on the GDE and the presence of the selective CoPc catalyst. The maximum energy efficiency of the system was more than 72.41% with a current density of over 50 mA/cm2, which was 12.5 times higher than what was previously reported on the H2S treatment system. The yields of S and CO were 24.94 mg·cm-2·h-1 and 19.93 mL·cm-2·h-1, respectively. A model analysis determined that the operation cost of the synchronous utilization of H2S and CO2 method was slightly lower than that of the single utilization of H2S in the existing natural gas purification technology. Overall, this paper provides efficient and simultaneous conversion of H2S and CO2 into S and CO.
Collapse
Affiliation(s)
- Bo Zhang
- School of Environmental Science and Engineering, Key Laboratory of Thin Film and Microfabrication Technology (Ministry of Education), Shanghai Jiao Tong University, Shanghai 200240, PR China
| | - Jing Bai
- School of Environmental Science and Engineering, Key Laboratory of Thin Film and Microfabrication Technology (Ministry of Education), Shanghai Jiao Tong University, Shanghai 200240, PR China
| | - Yan Zhang
- School of Environmental Science and Engineering, Key Laboratory of Thin Film and Microfabrication Technology (Ministry of Education), Shanghai Jiao Tong University, Shanghai 200240, PR China
| | - Changhui Zhou
- School of Environmental Science and Engineering, Key Laboratory of Thin Film and Microfabrication Technology (Ministry of Education), Shanghai Jiao Tong University, Shanghai 200240, PR China
| | - Pengbo Wang
- School of Environmental Science and Engineering, Key Laboratory of Thin Film and Microfabrication Technology (Ministry of Education), Shanghai Jiao Tong University, Shanghai 200240, PR China
| | - Lina Zha
- School of Environmental Science and Engineering, Key Laboratory of Thin Film and Microfabrication Technology (Ministry of Education), Shanghai Jiao Tong University, Shanghai 200240, PR China
| | - Jinhua Li
- School of Environmental Science and Engineering, Key Laboratory of Thin Film and Microfabrication Technology (Ministry of Education), Shanghai Jiao Tong University, Shanghai 200240, PR China
| | - Abdolreza Simchi
- Department of Materials Science and Engineering, Sharif University of Technology, Tehran 14588 89694, Iran
| | - Baoxue Zhou
- School of Environmental Science and Engineering, Key Laboratory of Thin Film and Microfabrication Technology (Ministry of Education), Shanghai Jiao Tong University, Shanghai 200240, PR China
- Shanghai Institute of Pollution Control and Ecological Security, Shanghai 200092, PR China
| |
Collapse
|
47
|
Li B, Zhao D, Wang F, Zhang X, Li W, Fan L. Recent advances in molecular logic gate chemosensors based on luminescent metal organic frameworks. Dalton Trans 2021; 50:14967-14977. [PMID: 34622897 DOI: 10.1039/d1dt02841c] [Citation(s) in RCA: 42] [Impact Index Per Article: 14.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/24/2022]
Abstract
Luminescent metal-organic frameworks (LMOFs) as chemosensors, can sense various analytes, such as heavy metal ions, antibiotics, pesticides, and small biological molecules. Based on the fluorescence characteristics of LMOFs, a variety of logic gates have been developed. In this review, we mainly discuss some common logic systems based on LMOFs, and then summarize the strategies of constructing logic gates from two perspectives. One is based on superior characteristics of MOFs, which can be synthesized from Ln3+ based MOFs (Ln-MOFs) or form hybrids by encapsulating different materials, including metal ions, dyes, and quantum dots (QDs). The other is to control the presence of inputs by reactions between different reactants and then further control switches of logic gates. Additionally, the common sensing mechanisms of LMOFs in logic gates are discussed. In the end, we have envisioned MOFs that possess a promising future in logic computing areas.
Collapse
Affiliation(s)
- Bei Li
- Department of Chemistry, College of Science, North University of China, Taiyuan 030051, P. R. China.
| | - Dongsheng Zhao
- Department of Chemistry, College of Science, North University of China, Taiyuan 030051, P. R. China.
| | - Feng Wang
- Department of Chemistry, College of Science, North University of China, Taiyuan 030051, P. R. China.
| | - Xiaoxian Zhang
- Department of Chemistry, College of Science, North University of China, Taiyuan 030051, P. R. China.
| | - Wenqian Li
- Department of Chemistry, College of Science, North University of China, Taiyuan 030051, P. R. China.
| | - Liming Fan
- Department of Chemistry, College of Science, North University of China, Taiyuan 030051, P. R. China.
| |
Collapse
|
48
|
Qian Z, Wei L, Mingyue W, Guansheng Q. Application of amine-modified porous materials for CO2 adsorption in mine confined spaces. Colloids Surf A Physicochem Eng Asp 2021. [DOI: 10.1016/j.colsurfa.2021.127483] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/07/2023]
|
49
|
Sun Y, Zhang Z, Tian L, Huang H, Geng C, Guo X, Qiao Z, Zhong C. Confined Ionic Liquid-Built Gas Transfer Pathways for Efficient Propylene/Propane Separation. ACS APPLIED MATERIALS & INTERFACES 2021; 13:49050-49057. [PMID: 34612045 DOI: 10.1021/acsami.1c15108] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
The separation of light olefins from paraffins using membrane technology is highly desired; however, synthetic polymer membranes generally suffer a pernicious trade-off between permeability and selectivity. Herein, we show that this limitation can be overcome by constructing selective gas transfer pathways in a polymer matrix, as demonstrated by incorporating composites of ionic liquids and zeolitic imidazolate frameworks (ZIFs) to form mixed-matrix membranes. Using propylene/propane separation as a model system, dramatic improvements in the propylene permeability of 218.4 Barrer and propylene/propane separation factor of 45.7 were achieved compared to the values obtained using individual components as a filler. The synergy between the high solubility of the gas molecules in ionic liquids and the size screening ability of ZIF exacerbates the difference in the transmission of propylene and propane, thus leading to superior separation performance. This work presents a promising strategy for the design of membranes for efficient gas separation.
Collapse
Affiliation(s)
- Yuxiu Sun
- State Key Laboratory of Separation Membranes and Membrane Processes, School of Chemical Engineering and Technology, Tiangong University, Tianjin 300387, China
| | - Zhengqing Zhang
- State Key Laboratory of Separation Membranes and Membrane Processes, School of Chemical Engineering and Technology, Tiangong University, Tianjin 300387, China
| | - Lei Tian
- State Key Laboratory of Separation Membranes and Membrane Processes, School of Chemical Engineering and Technology, Tiangong University, Tianjin 300387, China
| | - Hongliang Huang
- State Key Laboratory of Separation Membranes and Membrane Processes, School of Chemical Engineering and Technology, Tiangong University, Tianjin 300387, China
| | - Chenxu Geng
- State Key Laboratory of Separation Membranes and Membrane Processes, School of Chemical Engineering and Technology, Tiangong University, Tianjin 300387, China
| | - Xiangyu Guo
- State Key Laboratory of Separation Membranes and Membrane Processes, School of Chemical Engineering and Technology, Tiangong University, Tianjin 300387, China
| | - Zhihua Qiao
- State Key Laboratory of Separation Membranes and Membrane Processes, School of Chemical Engineering and Technology, Tiangong University, Tianjin 300387, China
| | - Chongli Zhong
- State Key Laboratory of Separation Membranes and Membrane Processes, School of Chemical Engineering and Technology, Tiangong University, Tianjin 300387, China
| |
Collapse
|
50
|
Fan W, Zhang X, Kang Z, Liu X, Sun D. Isoreticular chemistry within metal–organic frameworks for gas storage and separation. Coord Chem Rev 2021. [DOI: 10.1016/j.ccr.2021.213968] [Citation(s) in RCA: 62] [Impact Index Per Article: 20.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/06/2023]
|