Photocontrolled Iodine-Mediated Reversible-Deactivation Radical Polymerization: Solution Polymerization of Methacrylates by Irradiation with NIR LED Light

Photo-Deactivation Strategy for Switchable ATRP with the Assistance of Molecular Switches

Light irradiation is an external stimulus, rapidly developed in switchable atom transfer radical polymerization (ATRP) via photo-activation methods in recent years. Herein, a photo-deactivation strategy is introduced to regulate ATRP with the assistance of photoswitchable hexaarylbiimidozole (HABI). Under visible light irradiation and in the presence of HABI, ATRP is greatly decelerated or quenched depending on the concentration of HABI. Interestingly, with visible light off, ATRP can proceed smoothly and follow a first-order kinetics. Moreover, photo-switchable ATRP alternatively with light off and on is demonstrated. Besides, the mechanism of photo-deactivation ATRP involving radical quenching is proposed in the presence of HABI.

Near-infrared Light-Induced Polymerizations: Mechanisms and Applications

Photopolymerizations have garnered significant attention in polymer science due to their low polymerization temperature, high production efficiency, environmental friendliness, and spatial controllability. Despite these merits, the poor penetration and severe chemical damage from ultraviolet/visible (UV/Vis) light resources pose significant barriers to their success in conventional photopolymerizations. A recent breakthrough involving the utilization of near-infrared (NIR) laser with long wavelength has been exploited for diverse applications. With the combination of a NIR photosensitizer (PS), NIR-induced photopolymerizations have been successfully developed to alleviate the challenges in conventional methods. The enhancement of penetration depth and safety of NIR-induced photopolymerizations can contribute significantly to improving the efficiency of polymerization for production of intricate structures across various scales. In this concept, the typical types of PSs and polymerization mechanisms (PMs) within the NIR-induced photopolymerization systems have been classified in detail. Additionally, the applications of various polymers achieved by NIR-induced photopolymerizations are summarized. Furthermore, research directions and future challenges of this field are also discussed comprehensively.

Near-Infrared Light and Acid/Base Dual-Regulated Polymerization Utilizing Imidazole-Anion-Fused Perylene Diimides as Photocatalysts

This work presents the first example of acid/base-responsive and near-infrared (NIR)-absorbing photocatalysts based on imidazole-anion-fused perylene diimide chromophores. The photocatalysts were in situ generated by deprotonation of imidazole-fused perylene diimide under an alkaline environment. NIR (λ = 730 nm, 128 mW/cm2) photoinduced atom transfer radical polymerization (ATRP) was implemented, exhibiting high efficiency and excellent livingness under ppm level of photocatalysts (15 ppm relative to monomer) and Cu(II) complex (10 ppm relative to monomer) concentrations. The method showed capabilities to polymerize behind opaque barriers (i.e., paper and pig skin) and under aerobic condition. Notably, this work demonstrated a dual temporal control of polymerization by adding weak base/acid and switching NIR light on/off. The polymerization can even be halted by bubbling CO2 and was then fully recovered by adding triethylamine. The NIR photoATRP of acrylamide monomers in aqueous solution was also performed, which can be regulated by the change of pH.

Red-Light-Driven Atom Transfer Radical Polymerization for High-Throughput Polymer Synthesis in Open Air

Photoinduced reversible-deactivation radical polymerization (photo-RDRP) techniques offer exceptional control over polymerization, providing access to well-defined polymers and hybrid materials with complex architectures. However, most photo-RDRP methods rely on UV/visible light or photoredox catalysts (PCs), which require complex multistep synthesis. Herein, we present the first example of fully oxygen-tolerant red/NIR-light-mediated photoinduced atom transfer radical polymerization (photo-ATRP) in a high-throughput manner under biologically relevant conditions. The method uses commercially available methylene blue (MB+) as the PC and [X-CuII/TPMA]+ (TPMA = tris(2-pyridylmethyl)amine) complex as the deactivator. The mechanistic study revealed that MB+ undergoes a reductive quenching cycle in the presence of the TPMA ligand used in excess. The formed semireduced MB (MB•) sustains polymerization by regenerating the [CuI/TPMA]+ activator and together with [X-CuII/TPMA]+ provides control over the polymerization. This dual catalytic system exhibited excellent oxygen tolerance, enabling polymerizations with high monomer conversions (>90%) in less than 60 min at low volumes (50-250 μL) and high-throughput synthesis of a library of well-defined polymers and DNA-polymer bioconjugates with narrow molecular weight distributions (Đ < 1.30) in an open-air 96-well plate. In addition, the broad absorption spectrum of MB+ allowed ATRP to be triggered under UV to NIR irradiation (395-730 nm). This opens avenues for the integration of orthogonal photoinduced reactions. Finally, the MB+/Cu catalysis showed good biocompatibility during polymerization in the presence of cells, which expands the potential applications of this method.

Near-Infrared Light-Induced Reversible Deactivation Radical Polymerization: Expanding Frontiers in Photopolymerization

Photoinduced reversible deactivation radical polymerization (photo-RDRP) or photoinduced controlled/living radical polymerization has emerged as a versatile and powerful technique for preparing functional and advanced polymer materials under mild conditions by harnessing light energy. While UV and visible light (λ = 400-700 nm) are extensively employed in photo-RDRP, the utilization of near-infrared (NIR) wavelengths (λ = 700-2500 nm) beyond the visible region remains relatively unexplored. NIR light possesses unique properties, including enhanced light penetration, reduced light scattering, and low biomolecule absorption, thereby providing opportunities for applying photo-RDRP in the fields of manufacturing and medicine. This comprehensive review categorizes all known NIR light-induced RDRP (NIR-RDRP) systems into four mechanism-based types: mediation by upconversion nanoparticles, mediation by photocatalysts, photothermal conversion, and two-photon absorption. The distinct photoinitiation pathways associated with each mechanism are discussed. Furthermore, this review highlights the diverse applications of NIR-RDRP reported to date, including 3D printing, polymer brush fabrication, drug delivery, nanoparticle synthesis, and hydrogel formation. By presenting these applications, the review underscores the exceptional capabilities of NIR-RDRP and offers guidance for developing high-performance and versatile photopolymerization systems. Exploiting the unique properties of NIR light unlocks new opportunities for synthesizing functional and advanced polymer materials.

Enhancing Ultrasound-Assisted Iodine-Mediated Reversible-Deactivation Radical Polymerization by Piezoelectric Nanoparticles

The development of mechanochemical tools for regulating the polymerization process has received an increasing amount of attention in recent years. Herein, we report the example of the mechanically controlled iodine-mediated reversible-deactivation radical polymerization (mechano-RDRP) using piezoelectric tetragonal BaTiO3 nanoparticles (T-BTO) as mechanoredox catalyst and alkyl iodide as the initiator. We demonstrated a more efficient mechanochemical initiation and reversible deactivation process than sonochemical activation via a mechanoredox-mediated alkyl iodide cleavage reaction. The mechanochemical activation of the C-I bond was verified by density functional theory (DFT) calculations. Theoretical calculations together with experimental results confirmed the more efficient initiation and polymerization than the traditional sonochemical approach. The influence of BaTiO3, initiator, and solvent was further examined to reveal the mechanism of the mechano-RDRP. The results showed good controllability over molecular weight and capacity for a one-pot chain extension. This work expands the scope of mechanically controlled polymerization and shows good potential in the construction of adaptive materials.

NIR-Photocontrolled Aqueous RAFT Polymerization with Polymerizable Water-Soluble Zinc Phthalocyanine as Photocatalyst

In order to give an answer for the challenges of long wavelength-photocontrolled radical polymerization in aqueous solutions and to address the shortcomings of conventional near-infrared (NIR) photocatalysts (PCs) that are difficult to subject to post-treatment, we designed and synthesized a series of β-tetra-substituted water-soluble zinc phthalocyanines (β-TS-Zns) as the NIR PCs for reversible addition-fragmentation chain transfer (RAFT) polymerization successfully under irradiation with NIR (λ_max = 730 nm) light at room temperature. Importantly, the NIR PCs can also be designed as polymerizable monomers and covalently loaded on the polymer chains, which are endowed with permanent NIR photocatalysis of the resultant polymers. Moreover, the polymerization can not only be carried out in water but also in phosphate buffer saline (PBS) solution, yielding polymers with controlled molar mass and narrow dispersities (Đ = 1.03-1.25). Therefore, this NIR-photocontrolled aqueous RAFT polymerization system may provide a charming strategy for possible applications in tissue engineering biomaterial in situ benefiting from the high penetration ability of NIR light.

Switchable RAFT Polymerization Employing Photoresponsive HABI as a Mediator

Recently, considerable interest has been devoted to developing switchable reversible addition fragmentation chain transfer (RAFT) polymerizations via photoactivation methods. Herein, a photo-deactivation strategy is introduced to regulate RAFT polymerization using photoresponsive hexaarylbiimidozole (HABI) as a mediator, which leads to switchable RAFT polymerization by repeated ON/OFF experiments. In comparison with well-known PET-RAFT polymerization, photo-deactivation RAFT (PD-RAFT) polymerization can be temporally stopped with UV light ON, where photoresponsive HABI can reversibly quench propagating radicals, resulting in switchable RAFT polymerization. The proposed mechanism of PD-RAFT polymerization in the presence of HABI involving radical quenching is based on ESR, NMR, GPC, MALDI-TOF-MS, and kinetics studies.

An aqueous photo-controlled polymerization under NIR wavelengths: synthesis of polymeric nanoparticles through thick barriers

We report an aqueous and near-infrared (NIR) light mediated photoinduced reversible addition-fragmentation chain transfer (photo-RAFT) polymerization system using tetrasulfonated zinc phthalocyanine (ZnPcS4 -) as a photocatalyst. Owing to the high catalytic efficiency and excellent oxygen tolerance of this system, well-controlled polyacrylamides, polyacrylates, and polymethacrylates were synthesized at fast rates without requiring deoxygenation. Notably, NIR wavelengths possess enhanced light penetration through non-transparent barriers compared to UV and visible light, allowing high polymerization rates through barriers. Using 6.0 mm pig skin as a barrier, the polymerization rate was only reduced from 0.36 to 0.21 h-1, indicating potential for biomedical applications. Furthermore, longer wavelengths (higher λ) can be considered an ideal light source for dispersion photopolymerization, especially for the synthesis of large diameter (d) nanoparticles, as light scattering is proportional to d 6/λ 4. Therefore, this aqueous photo-RAFT system was applied to photoinduced polymerization-induced self-assembly (photo-PISA), enabling the synthesis of polymeric nanoparticles with various morphologies, including spheres, worms, and vesicles. Taking advantage of high penetration and reduced light scattering of NIR wavelengths, we demonstrate the first syntheses of polymeric nanoparticles with consistent morphologies through thick barriers.

RAFT Polymerization of Semifluorinated Monomers Mediated by a NIR Fluorinated Photocatalyst

Near-infrared (NIR) light plays an increasingly important role in the field of photoinduced electron/energy transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization due to its unique properties. Yet, the NIR photocatalyst with good stability for PET-RAFT polymerization remains promising. Here, a strategy of NIR PET-RAFT polymerization of semifluorinated monomers using fluorophenyl bacteriochlorin as a photocatalyst with strong absorption at the NIR light region (710-780 nm) is reported. In which, the F atoms are used to modify reduced tetraphenylporphyrin structure with enhanced photostability of photocatalyst. Under the irradiation of NIR light (λ_max = 740 nm), the PET-RAFT polymerization of semifluorinated methylacrylic monomers presents living/control characteristics and temporal modulation. By the PET-RAFT polymerization-induced self-assembly (PISA) strategy, stable fluorine-containing micelles are constructed in various solvents. In addition, the fluorinated hydrophobic surface is fabricated via a surface-initiated PET-RAFT (SI-PET-RAFT) polymerization using silicon wafer bearing RAFT agents with tunable surface hydrophobicity. This strategy not only enlightens the application of further modified compounds based on porphyrin structure in photopolymerization, but also shows promising potential for the construction of well-defined functional fluoropolymers.

Main-Chain Fluoropolymers with Alternating Sequence Control via Light-Driven Reversible-Deactivation Copolymerization in Batch and Flow

Polymers with regulated alternating structures are attractive in practical applications, particularly for main-chain fluoropolymers. We for the first time enabled controlled fluoropolymer synthesis with alternating sequence regulation using a novel fluorinated xanthate agent via a light-driven process, which achieved on-demand copolymerization of chlorotrifluoroethylene and vinyl esters/amides under both batch and flow conditions at ambient pressure. This method creates a facile access to fluoropolymers with a broad fraction range of alternating units, low dispersities and high chain-end fidelity. Moreover, a two-step photo-flow platform was established to streamline the in-situ chain-extension toward unprecedented block copolymers continuously from fluoroethylene. Influences of structural control were illustrated with thermal and surface properties. We anticipate that this work will promote advanced material engineering with customized fluoropolymers.

Expanding monomer scope and enabling post-modification in photocontrolled radical ring-opening polymerization of vinylcyclopropanes by an iodine transfer strategy

Visible light-driven iodine transfer polymerization provides efficient and unique access to novel poly(vinylcyclopropanes) with enhanced material properties.

Organocatalytic PET-RAFT polymerization with a low ppm of organic photocatalyst under visible light

The development of light-mediated controlled radical polymerization has benefited from the discovery of novel photocatalysts, which could allow precise light control over the polymerization process and the production of well-defined polymers.

Reversible complexation mediated polymerization: an emerging type of organocatalytically controlled radical polymerization

Reversible complexation mediated polymerization (RCMP) was developed as a new class of controlled radical polymerization (CRP) using organic catalysts. In particular, photo-RCMP is among the simplest, cheapest, and most robust photoinduced CRPs.

Tosyl iodide – a new initiator for the photo-controlled iodine transfer polymerization of methacrylates under sunlight irradiation

A very simple photo-controlled iodine transfer polymerization system consisting only of methacrylate monomers, solvent (dimethylacetamide), and initiator (tosyl iodide) under violet and sunlight irradiation is reported.

Photoinduced organocatalyzed controlled radical polymerization feasible over a wide range of wavelengths

We successfully synthesized a catalyst with a wide absorption range (300–1000 nm) for controlled radical polymerization of PEGMA in aqueous solution and MMA in bulk under the irradiation of white, blue, green, red, and NIR LED light, and sunlight.

Facile photochemical synthesis of main-chain-type semifluorinated alternating copolymers catalyzed by conventional amines or halide salts

In this work, we report a much simpler and low-cost method to prepare main-chain-type semifluorinated alternating copolymers by the formation of a halogen bond (XB) complex between α,ω-diiodoperfluoroalkanes and amines/halide salts. It is interesting that the terminal iodine functional group of the polymer chains is easily lost in the amine-promoted system, while the loss can be significantly reduced by adding a small amount of water. Importantly, the system promoted by halide salts can ensure complete retention of the iodine functional group. Overall, the establishment of this method provides a new strategy for designing smart fluoropolymer materials in a green and environmentally friendly facile manner under irradiation with visible light at room temperature.

Visible Light-Regulated Heterogeneous Catalytic PET-RAFT by High Crystallinity Covalent Organic Framework

Covalent organic frameworks (COFs) are a class of promising photocatalysts for conversing light energy into chemical energy. Based on the tunable building blocks, COFs can be well-designed as photocatalyst for mediating reversible addition-fragmentation chain-transfer (RAFT) polymerization. Herein, 1,3,6,8-tetrakis(4-formylphenyl)pyrene (TFPPy) and 2,2″-bipyridine-5,5″-diamine (Bpy) are chosen to construct imine-based TFPPy-Bpy-COFs for catalyzing RAFT polymerization of methacrylates under white light irradiation. The well-defined polymers with precise molecular weight and narrow molecular weight distribution are obtained. The switch on/off light experiments suggest excellent temporal control toward RAFT polymerization system and the chain-extension reaction indicates high chain-end fidelity of macro-initiators. Mechanism study clarifies that the electron transfer between excited state of TFPPy-Bpy-COFs and RAFT agent can form living radicals to mediate polymerization. This methodology provides a novel platform for reversible-deactivation radical polymerization using COFs as heterogeneous catalysts.

Facile Synthesis of Unimodal Polymethacrylates with Narrow Dispersity via NIR LED Light-Controlled Bromine-Iodine Transformation Reversible-Deactivation Radical Polymerization

A facile and clean strategy for synthesizing unimodal polymethacrylates with narrow dispersity (Đ < 1.10) is successfully developed by a near-infrared (NIR) light-emitting diode (LED) light (λ_max = 740 nm)-controlled in situ bromine-iodine transformation reversible-deactivation radical polymerization system without the use of NIR dyes and expensive catalysts. In this system, alkyl iodide ethyl α-iodophenylacetate (EIPA) initiator is generated in situ by the nucleophilic substitution reaction between an alkyl bromide compound ethyl α-bromophenylacetate and sodium iodide (NaI). At the same time, excessive NaI is also acted as a highly active catalyst by forming halogen bonds with terminal iodine of the polymer chains in this system to make it capable of precisely synthesizing polymethacrylates with narrow dispersities (Đ = 1.03-1.10). In addition, the strong penetration ability of NIR LED light is illustrated by the successful polymerization even through 11 pieces of A4 paper.

Durable and recyclable conjugated microporous polymer mediated controlled radical polymerization under white LED light irradiation

In this work, we report the first example of the use of a conjugated microporous polymer material (EI-CMP) as a heterogeneous catalyst in reversible complexation-mediated radical polymerization under white LED light irradiation.

Imidazole based dual photo/thermal initiators for highly efficient radical polymerization under air with a metal-free approach

A metal-free visible LED photopolymerization process, initiated by imidazole based charge transfer complexes under mild conditions (room temperature, without an inert atmosphere, monomer purification or stabilizer removal), is reported.

Photocontrolled bromine–iodine transformation reversible-deactivation radical polymerization: facile synthesis of star copolymers and unimolecular micelles

A facile strategy of synthesizing star copolymers was successfully established via photocontrolled BIT-RDRP. The obtained copolymers have well-defined four-arm amphiphilic block architecture and can form stable unimolecular micelles in water.

A covalent organic framework as a photocatalyst for atom transfer radical polymerization under white light irradiation

TFPPy-Td-COFs have been synthesized to serve as heterogeneous photocatalysts for mediating photo-induced ATRP with copper as a co-catalyst under white light irradiation.

Near-Infrared, Light-Induced Cationic and Radical RAFT Polymerization Catalyzed by Iron Complex

A near-infrared (NIR) light induced controlled cationic polymerization is presented here. The halide abstraction reaction between the cyclopentadienyl iron dicarbonyl dimer (Fe₂(Cp)₂(CO)₄) and an organic halide is utilized to generate initial radicals or cations under mild conditions, which can be further combined with both radical and cationic reversible addition-fragmentation chain transfer (RAFT) polymerization. Well-defined poly(vinyl ether)s and polyacrylates are prepared successfully under NIR light by this method. The excellent penetration ability of NIR light through thick barriers has been verified by polymerization in the presence of an A4 paper. In addition, iron-based radical polymerization has been used for three-dimensional (3D) printing to fabricate materials with different thicknesses.

Achieving Ultrahigh Molecular Weights with Diverse Architectures for Unconjugated Monomers through Oxygen-Tolerant Photoenzymatic RAFT Polymerization

Achieving well-defined polymers with ultrahigh molecular weight (UHMW) is an enduring pursuit in the field of reversible deactivation radical polymerization. Synthetic protocols have been successfully developed to achieve UHMWs with low dispersities exclusively from conjugated monomers while no polymerization of unconjugated monomers has provided the same level of control. Herein, an oxygen-tolerant photoenzymatic RAFT (reversible addition-fragmentation chain transfer) polymerization was exploited to tackle this challenge for unconjugated monomers at 10 °C, enabling facile synthesis of well-defined, linear and star polymers with near-quantitative conversions, unprecedented UHMWs and low dispersities. The exquisite level of control over composition, MW and architecture, coupled with operational ease, mild conditions and environmental friendliness, broadens the monomer scope to include unconjugated monomers, and to achieve previously inaccessible low-dispersity UHMWs.

Light-intensity switch enabled nonsynchronous growth of fluorinated raspberry-like nanoparticles

Raspberry-like (RB) nanoparticles hold potential for diverse applications due to their hierarchical morphology. Here we developed a novel tandem synthetic approach of nonsynchronous growth based on photo-mediated reversible-deactivation radical polymerization, enabling simple, efficient and bottom-up synthesis of RB nanoparticles of uniform sizes at quantitative conversions of fluorinated monomers. Chain transfer agents of different chain lengths, concentrations and chemical compositions were varied to tune the diameter of RB particles. Importantly, fluorinated RB nanoparticles obtained with this method allow facile post modifications via both covalent bond formation and intermolecular physical interactions without disrupting the RB morphology. The facile nature of this method and versatility of the obtained fluorinated RB materials open new opportunities for the development of functional materials using nanoparticles.

Role of External Field in Polymerization: Mechanism and Kinetics

The past decades have witnessed an increasing interest in developing advanced polymerization techniques subjected to external fields. Various physical modulations, such as temperature, light, electricity, magnetic field, ultrasound, and microwave irradiation, are noninvasive means, having superb but distinct abilities to regulate polymerizations in terms of process intensification and spatial and temporal controls. Gas as an emerging regulator plays a distinctive role in controlling polymerization and resembles a physical regulator in some cases. This review provides a systematic overview of seven types of external-field-regulated polymerizations, ranging from chain-growth to step-growth polymerization. A detailed account of the relevant mechanism and kinetics is provided to better understand the role of each external field in polymerization. In addition, given the crucial role of modeling and simulation in mechanisms and kinetics investigation, an overview of model construction and typical numerical methods used in this field as well as highlights of the interaction between experiment and simulation toward kinetics in the existing systems are given. At the end, limitations and future perspectives for this field are critically discussed. This state-of-the-art research progress not only provides the fundamental principles underlying external-field-regulated polymerizations but also stimulates new development of advanced polymerization methods.

Investigations into CTA-differentiation-involving polymerization of fluorous monomers: exploitation of experimental variances in fine-tuning of molecular weights

Condition and substrate effects on CTA-differentiation-involving polymerization were explored for logical control of molecular weight.

Photocontrolled iodine-mediated reversible-deactivation radical polymerization with a semifluorinated alternating copolymer as the macroinitiator

A novel strategy for preparing block copolymers with semifluorinated alternating copolymers as macroinitiators was established by photocontrolled iodine-mediated RDRP under irradiation with blue LED light at room temperature.

Iodine-mediated photo-controlled atom transfer radical polymerization (photo-ATRP) and block polymerization combined with ring-opening polymerization (ROP) via a superbase

Most organocatalysts for photo-controlled atom transfer radical polymerization (photo-ATRP) are metal complexes or synthetically elaborate organic dyes, which are toxic and expensive.

Recent development in halogen-bonding-catalyzed living radical polymerization

The development and applications of an organocatalyzed living radical polymerization via halogen-bonding catalysis, i.e., reversible complexation mediated polymerization (RCMP), are highlighted.