Bio-Coreactant-Enhanced Electrochemiluminescence Microscopy of Intracellular Structure and Transport

Shadow electrochemiluminescence imaging of giant liposomes opening at polarized electrodes

In this work, the release of giant liposome (∼100 μm in diameter) content was imaged by shadow electrochemiluminescence (ECL) microscopy. Giant unilamellar liposomes were pre-loaded with a sucrose solution and allowed to sediment at an ITO electrode surface immersed in a solution containing a luminophore ([Ru(bpy)3]2+) and a sacrificial co-reactant (tri-n-propylamine). Upon polarization, the electrode exhibited illumination over its entire surface thanks to the oxidation of ECL reagents. However, as soon as liposomes reached the electrode surface, dark spots appeared and then spread over time on the surface. This observation reflected a blockage of the electrode surface at the contact point between the liposome and the electrode surface, followed by the dilution of ECL reagents after the rupture of the liposome membrane and release of its internal ECL-inactive solution. Interestingly, ECL reappeared in areas where it initially faded, indicating back-diffusion of ECL reagents towards the previously diluted area and thus confirming liposome permeabilization. The whole process was analyzed qualitatively and quantitatively within the defined region of interest. Two mass transport regimes were identified: a gravity-driven spreading process when the liposome releases its content leading to ECL vanishing and a diffusive regime when ECL recovers. The reported shadow ECL microscopy should find promising applications for the imaging of transient events such as molecular species released by artificial or biological vesicles.

Controllable and Low-Loss Electrochemiluminescence Waveguide Supported by a Micropipette Electrode

One-dimensional molecular crystal waveguide (MCW) can transmit self-generated electrochemiluminescence (ECL), but heavy optical loss occurs because of the small difference in the refractive index between the crystal and its surroundings. Herein, we report a micropipette electrode-supported MCW (MPE/MCW) for precisely controlling the far-field transmission of ECL in air with a low optical loss. ECL is generated from one terminal of the MCW positioned inside the MPE, which is transmitted along the MCW to the other terminal in air. In comparison with conventional waveguides on solid substrates or in solutions, the MPE/MCW is propitious to the total internal reflection of light at the MCW/air interface, thus confining the ECL efficiently in MCW and improving the waveguide performance with an extremely low-loss coefficient of 4.49 × 10-3 dB μm-1. Moreover, by regulation of the gas atmosphere, active and passive waveguides can be resolved simultaneously inside MPE and in air. This MPE/MCW offers a unique advantage of spatially controlling and separating ECL signal readout from its generation, thus holding great promise in biosensing without or with less electrical/chemical disturbance.

Infrared photoinduced electrochemiluminescence microscopy of single cells

Electrochemiluminescence (ECL) is evolving rapidly from a purely analytical technique into a powerful microscopy. Herein, we report the imaging of single cells by photoinduced ECL (PECL; λem = 620 nm) stimulated by an incident near-infrared light (λexc = 1050 nm). The cells were grown on a metal-insulator-semiconductor (MIS) n-Si/SiOx/Ir photoanode that exhibited stable and bright PECL emission. The large anti-Stokes shift allowed for the recording of well-resolved images of cells with high sensitivity. PECL microscopy is demonstrated at a remarkably low onset potential of 0.8 V; this contrasts with classic ECL, which is blind at this potential. Two imaging modes are reported: (i) photoinduced positive ECL (PECL+), showing the cell membranes labeled with the [Ru(bpy)3]2+ complex; and (ii) photoinduced shadow label-free ECL (PECL-) of cell morphology, with the luminophore in the solution. Finally, by adding a new dimension with the near-infrared light stimulus, PECL microscopy should find promising applications to image and study single photoactive nanoparticles and biological entities.

A review of innovative electrochemical strategies for bioactive molecule detection and cell imaging: Current advances and challenges

Cellular heterogeneity poses a major challenge for tumor theranostics, requiring high-resolution intercellular bioanalysis strategies. Over the past decades, the advantages of electrochemical analysis, such as high sensitivity, good spatio-temporal resolution, and ease of use, have made it the preferred method to uncover cellular differences. To inspire more creative research, herein, we highlight seminal works in electrochemical techniques for biomolecule analysis and bioimaging. Specifically, micro/nano-electrode-based electrochemical techniques enable real-time quantitative analysis of electroactive substances relevant to life processes in the micro-nanostructure of cells and tissues. Nanopore-based technique plays a vital role in biosensing by utilizing nanoscale pores to achieve high-precision detection and analysis of biomolecules with exceptional sensitivity and single-molecule resolution. Electrochemiluminescence (ECL) technology is utilized for real-time monitoring of the behavior and features of individual cancer cells, enabling observation of their dynamic processes due to its capability of providing high-resolution and highly sensitive bioimaging of cells. Particularly, scanning electrochemical microscopy (SECM) and scanning ion conductance microscopy (SICM) which are widely used in real-time observation of cell surface biological processes and three-dimensional imaging of micro-nano structures, such as metabolic activity, ion channel activity, and cell morphology are introduced in this review. Furthermore, the expansion of the scope of cellular electrochemistry research by innovative functionalized electrodes and electrochemical imaging models and strategies to address future challenges and potential applications is also discussed in this review.

Optics Determines the Electrochemiluminescence Signal of Bead-Based Immunoassays

Electrochemiluminescence (ECL) is an optical readout technique that is successfully applied for the detection of biomarkers in body fluids using microbead-based immunoassays. This technology is of utmost importance for in vitro diagnostics and thus a very active research area but is mainly focused on the quest for new dyes and coreactants, whereas the investigation of the ECL optics is extremely scarce. Herein, we report the 3D imaging of the ECL signals recorded at single microbeads decorated with the ECL labels in the sandwich immunoassay format. We show that the optical effects due to the light propagation through the bead determine mainly the spatial distribution of the recorded ECL signals. Indeed, the optical simulations based on the discrete dipole approximation compute rigorously the electromagnetic scattering of the ECL emission by the microbead and allow for reconstructing the spatial map of ECL emission. Thus, it provides a global description of the ECL chemical reactivity and the associated optics. The outcomes of this 3D imaging approach complemented by the optical modeling provide insight into the ECL optics and the unique ECL chemical mechanism operating on bead-based immunoassays. Therefore, it opens new directions for mechanistic investigations, ultrasensitive ECL bioassays, and imaging.

Application and outlook of electrochemical technology in single-cell analysis

Cellular heterogeneity, especially in some important diseased cells like tumor cells, acts as an invisible driver for disease development like cancer progression in the tumor ecosystem, contributing to differences in the macroscopic and microscopic detection of disease lesions like tumors. Traditional analysis techniques choose group information masked by the mean as the analysis sample, making it difficult to achieve precise diagnosis and target treatment, on which could be shed light via the single-cell level determination/bioanalysis. Hence, in this article we have reviewed the special characteristic differences among various kinds of typical single-cell bioanalysis strategies and electrochemical techniques, and then focused on the recent advance and special bio-applications of electrochemiluminescence and micro-nano electrochemical sensing mediated in single-cell bioimaging & bioanalysis. Especially, we have summarized the relevant research exploration of the possibility to establish the in-situ single-cell electrochemical methods to detect cell heterogeneity through determination of specific biomolecules and bioimaging of some important biological processes. Eventually, this review has explored some important advances of electrochemical single-cell detection techniques for the real-time cellular bioimaging and diagnostics of some disease lesions like tumors. It raises the possibility to provide the specific in-situ platform to exploit the versatile, sensitive, and high-resolution electrochemical single-cell analysis for the promising biomedical applications like rapid tracing of some disease lesions or in vivo bioimaging for precise cancer theranostics.

T Cell Antigen Recognition and Discrimination by Electrochemiluminescence Imaging

Adoptive T lymphocyte (T cell) transfer and tumour-specific peptide vaccines are innovative cancer therapies. An accurate assessment of the specific reactivity of T cell receptors (TCRs) to tumour antigens is required because of the high heterogeneity of tumour cells and the immunosuppressive tumour microenvironment. In this study, we report a label-free electrochemiluminescence (ECL) imaging approach for recognising and discriminating between TCRs and tumour-specific antigens by imaging the immune synapses of T cells. Various T cell stimuli, including agonistic antibodies, auxiliary molecules, and tumour-specific antigens, were modified on the electrode's surface to allow for their interaction with T cells bearing different TCRs. The formation of immune synapses activated by specific stimuli produced a negative (shadow) ECL image, from which T cell antigen recognition and discrimination were evaluated by analysing the spreading area and the recognition intensity of T cells. This approach provides an easy way to assess TCR-antigen specificity and screen both of them for immunotherapies.

Nanoconfined Cathodic Electrochemiluminescence for Self-Sensitized Bioimaging of Membrane Protein

Self-enhanced electrochemiluminescence (ECL) can be achieved via the confinement of coreactants and ECL emitters in a single nanostructure. This strategy has been used for the design of anodic ECL systems with amine compounds as coreactants. In this work, a novel confinement system was proposed by codoping positively charged ECL emitter tris(2,2'-bipyridine)ruthenium(II) (Ru(bpy)32+) and negatively charged coreactant peroxydisulfate (S2O82-) in silica nanoparticles. The codoping process could be performed by introducing S2O82- in cationic poly(diallyldimethylammonium chloride) (PDDA) to form PDDA@S2O82- and then encapsulating it and Ru(bpy)32+ in the Triton X-100 vesicle followed by the hydrolysis of tetraethyl ortosilicate, surface modification, and demulsification. The obtained RuSSNs exhibited good homogeneity, excellent monodispersity, acceptable biocompatibility, and 2.9-fold stronger ECL emission than Ru(bpy)32+-doped silica nanoparticles at an equal amount of nanoparticles in the presence of 0.1 M K2S2O8. Thus, an in situ self-sensitized cathodic ECL imaging method was designed for the monitoring of glycoprotein on living cell membranes. This work provides a new way for the modification, enhancement, and application of nano-ECL emitters in biological analysis.

Beyond External Light: On-Spot Light Generation or Light Delivery for Highly Penetrated Photodynamic Therapy

External light sources, such as lasers, light emitting diodes (LEDs) and lamps, are widely applied in photodynamic therapy (PDT); however, their use is severely limited by the nature of shallow tissue penetration depth. The recent exploration of light delivery or local generation on tumor sites has attracted much attention, owing to the fact that these systems are significantly endowed with high tissue penetration. In this review, we briefly introduced the principle of "on-spot light generation or delivery systems" in PDT. These systems are divided into different categories: (1) implantable luminescence, (2) mechanoluminescence, (3) electrochemiluminescence, (4) Cerenkov luminescence, (5) chemiluminescence, and (6) bioluminescence. Finally, their applications, advantages, and disadvantages in PDT will be appropriately summarized and further discussed in detail. We believe that this review will provide general guidance for the further design of light generation or delivery systems and clinical studies for PDT-mediated cancer treatments with unparalleled merits.

Dynamic Mapping of Electrochemiluminescence Reactivity in Space: Application to Bead-Based Assays

As an electrochemical technique offering an optical readout, electrochemiluminescence (ECL) evolved recently into a powerful microscopy technique with the visualization of a wide range of microscopic entities. However, the dynamic imaging of transient ECL events did not receive intensive attention due to the limited number of electrogenerated photons. Here, the reaction kinetics of the model ECL bioassay system was revealed by dynamic imaging of single [Ru(bpy)3]2+-functionalized beads in the presence of the efficient tripropylamine coreactant. The time profile behavior of ECL emission, the variations of the ECL layer thickness, and the position of maximum ECL intensity over time were investigated, which were not achieved by static imaging in previous studies. Moreover, the dynamics of the ECL emission were confronted with the simulation. The reported dynamic ECL imaging allows the investigation of the ECL kinetics and mechanisms operating in bioassays and cell microscopy.

An In Situ Investigation of the Protein Corona Formation Kinetics of Single Nanomedicine Carriers by Self-Regulated Electrochemiluminescence Microscopy

Protein coronas are present extensively at the bio-nano interface due to the natural adsorption of proteins onto nanomaterials in biological fluids. Aside from the robust property of nanoparticles, the dynamics of the protein corona shell largely define their chemical identity by altering interface properties. However, the soft coronas are normally complex and rapidly changing. To real-time monitor the entire formation, we report here a self-regulated electrochemiluminescence (ECL) microscopy based on the interaction of the Ru(bpy)3 3+ with the nanoparticle surface. Thus, the heterogeneity of the protein corona is in situ observed in single nanoparticle "cores" before and after loading drugs in nanomedicine carriers. The label-free, optical stable and dynamic ECL microscopy minimize misinterpretations caused by the variation of nanoparticle size and polydispersity. Accordingly, the synergetic actions of proteins and nanoparticles properties are uncovered by chemically engineered protein corona. After comparing the protein corona formation kinetics in different complex systems and different nanomedicine carriers, the universality and accuracy of this technique were well demonstrated via the protein corona formation kinetics curves regulated by competitive adsorption of Ru(bpy)3 3+ and multiple proteins on surface of various carriers. The work is of great significance for studying bio-nano interface in drug delivery and targeted cancer treatment.

Gold Microbeads Enabled Proximity Electrochemiluminescence for Highly Sensitive and Size-Encoded Multiplex Immunoassays

Developing highly sensitive multiplex immunoassays is urgently needed to guide medical research and improve clinical diagnosis. Here, we report the proximity electrochemiluminescence (ECL) generation enabled by gold microbeads (GMBs) for improving the detection sensitivity and multiplexing capacity of ECL immunoassays (ECLIAs). As demonstrated by microscopy and finite element simulation, GMBs can function as spherical ultramicroelectrodes for triggering ECL reactions in solutions. Employing GMBs as solid carriers in the bead-based ECLIA, the electrochemical oxidation of a coreactant can occur at both the GMB surface and the substrate electrode, allowing the coreactant radicals to diffuse only a short distance of ∼100 nm to react with ECL luminophores that are labeled on the GMB surface. The ECL generation via this proximity low oxidation potential (LOP) route results in a 21.7-fold increase in the turnover frequency of ECL generation compared with the non-conductive microbeads that rely exclusively on the conventional LOP route. Moreover, the proximity ECL generation is not restricted by the diffusion distance of short-lived coreactant radicals, which enables the simultaneous determination of multiple acute myocardial infarction biomarkers using size-encoded GMB-based multiplex ECLIAs. This work brings new insight into the understanding of ECL mechanisms and may advance the practical use of multiplex ECLIAs.

Self-Enhanced Electrochemiluminescence Imaging System Based on the Accelerated Generation of ROS under Ultrasound

Electrochemiluminescence (ECL) imaging, as an optical technology, has been developed at full tilt in the field of life science and nanomaterials. However, the relatively low ECL intensity or the high co-reactant concentration needed in the electrochemical reaction blocks its practical application. Here, we developed an ECL imaging system based on the rGO-TiO_2-x composite material, where the co-reactant, reactive oxygen species (ROS), is generated in situ under the synergetic effect of of ultrasound (US) and electric irradiation. The rGO-TiO_2-x composites facilitate the separation of electron (e^-) and hole (h⁺) pairs and inhibit recombination triggered by external US irradiation due to the high electroconductivity of rGO and oxygen-deficient structures of TiO₂, thus significantly boosting ROS generation. Furthermore, the increased defects on rGO accelerate the electron transfer rate, improving the electrocatalytic performance of the composite and forming more ROS. This high ultrasonic-electric synergistic efficacy is demonstrated through the enhancement of photon emission. Compared with the luminescence intensity triggered by US irradiation and electric field, an enhancement of ∼20-fold and 10-fold of the US combined with electric field-triggered emission is observed from this composite. Under the optimized conditions, using dopamine (DA) as a model target, the sensitivity of the US combined ECL strategy for detection of DA is two orders of magnitude higher than that of the ECL method. The successful detection of DA at low concentrations makes us believe that this strategy provides the possibility of applying ECL imaging for cellular single-molecule analysis and cancer therapy.

Iron Single-Atom Catalyst-Enabled Peroxydisulfate Activation Enhances Cathodic Electrochemiluminescence of Tris(bipyridine)ruthenium(II)

The tris(bipyridine)ruthenium(II) (Ru(bpy)₃²⁺)-tripropylamine anodic electrochemiluminescence (ECL) system has been widely applied in commercial bioanalysis. However, the presence of amine compounds in the biological environment results in unavoidable anodic interference signals, which hinder further extensive use of the system. In contrast, the cathodic Ru(bpy)₃²⁺ ECL system can overcome these limitations. The Ru(bpy)₃²⁺/peroxydisulfate (S₂O₈^2-, PDS) ECL system has been extensively employed due to its ability to produce a sulfate radical anion (SO₄^•-) with strong oxidation ability, which enhances the ECL signal. However, the symmetrical molecular structure of PDS makes it challenging to be activated and causes low luminescence efficiency. To address this issue, we propose an efficient Ru(bpy)₃²⁺-based ternary ECL system that uses the iron-nitrogen-carbon single-atom catalyst (Fe-N-C SAC) as an advanced accelerator. Fe-N-C SAC can efficiently activate PDS into reactive oxygen species at a lower voltage, which significantly boosts the cathodic ECL emission of Ru(bpy)₃²⁺. Benefiting from the outstanding catalytic activity of Fe-N-C SAC, we successfully established an ECL biosensor that detects alkaline phosphatase activity with high sensitivity, demonstrating the feasibility of practical application.

Bright near-infrared circularly polarized electrochemiluminescence from Au9Ag4 nanoclusters

Metal nanoclusters are excellent electrochemiluminescent luminophores owing to their rich electrochemical and optical properties. However, the optical activity of their electrochemiluminescence (ECL) is unknown. Herein, we achieved, for the first time, the integration of optical activity and ECL, i.e., circularly polarized electrochemiluminescence (CPECL), in a pair of chiral Au₉Ag₄ metal nanocluster enantiomers. Chiral ligand induction and alloying were employed to endow the racemic nanoclusters with chirality and photoelectrochemical reactivity. S-Au₉Ag₄ and R-Au₉Ag₄ exhibited chirality and bright-red emission (quantum yield = 4.2%) in the ground and excited states. The enantiomers showed mirror-imaged CPECL signals at 805 nm owing to their highly intense and stable ECL emission in the presence of tripropylamine as a co-reactant. The ECL dissymmetry factor of the enantiomers at 805 nm was calculated to be ±3 × 10^-3, which is comparable with that obtained from their photoluminescence. The obtained nanocluster CPECL platform shows the discrimination of chiral 2-chloropropionic acid. The integration of optical activity and ECL in metal nanoclusters provides the opportunity to achieve enantiomer discrimination and local chirality detection with high sensitivity and contrast.

Bimodal Electrochemiluminescence Microscopy of Single Cells

Electrochemiluminescence (ECL) microscopy is an emerging technique with new applications such as imaging of single entities and cells. Herein, we have developed a bimodal and bicolor approach to record both positive ECL (PECL: light-emitting object on dark background) and shadow label-free ECL (SECL: nonemissive object shadowing the background luminescence) images of single cells. This bimodal approach is the result of the simultaneous emissions of [Ru(bpy)₃]²⁺ used to label the cellular membrane (PECL) and [Ir(sppy)₃]^3- dissolved in solution (SECL). By spectrally resolving the ECL emission wavelengths, we recorded the images of the same cells in both PECL and SECL modes using the [Ru(bpy)₃]²⁺ (λ_max = 620 nm) and [Ir(sppy)₃]^3- (λ_max = 515 nm) luminescence, respectively. PECL shows the distribution of the [Ru(bpy)₃]²⁺ labels attached to the cellular membrane, whereas SECL reflects the local diffusional hindrance of the ECL reagents by each cell. The high sensitivity and surface-confined features of the reported approach are demonstrated by imaging cell-cell contacts during the mitosis process. Furthermore, the comparison of PECL and SECL images demonstrates the differential diffusion of tri-n-propylamine and [Ir(sppy)₃]^3- through the permeabilized cell membranes. Consequently, this dual approach enables the imaging of the morphology of the cell adhering on the surface and can significantly contribute to multimodal ECL imaging and bioassays with different luminescent systems.

Multicolor Iridium(III) Complexes with Host-Guest Recognition Motifs for Enhanced Electrochemiluminescence and Modular Labeling

Cyclometalated Ir(III) complexes with high electrochemiluminescence (ECL) efficiency and appropriate bioconjugation sites are urgently needed in ECL immunoassays (ECLIA). Herein, we report the synthesis, photophysics, electrochemistry, and ECL of six new Ir(III) complexes bearing naphthyl (nap) or adamantane phenyl (adap) substitutions, four of which emit cyan, green, or red light and display 1.7- to 7.5-fold increases in ECL intensity. In combination with DFT/TDDFT calculations, this enhancement is rationalized to the augmented radiative rate that arises from both the strengthened spin-orbit coupling (SOC) and the increased transition dipole moment. In addition, the adap-based Ir(III) complex shows high binding affinity with β-cyclodextrin (β-CD) due to the strong hydrophobic interaction, which enables us to develop a modular strategy for the labeling of Ir(III) complexes with biomolecules and to use hydrophobic luminophores in the aqueous-phase detection. As demonstrated, a novel ECLIA is built up and exhibits a wide linear range from 1 ng/mL to 10 μg/mL and a detection limit of 72 pg/mL for the determination of C-reactive protein (CRP). These findings provide new insights into the design, synthesis, and bio-labeling of highly emissive Ir(III) complexes and pave the way for the development of novel ECLIA based on host-guest recognition motifs.

Nanoconfinement-Enhanced Electrochemiluminescence for in Situ Imaging of Single Biomolecules

Direct imaging of electrochemical reactions at the single-molecule level is of potential interest in materials, diagnostic, and catalysis applications. Electrochemiluminescence (ECL) offers the opportunity to convert redox events into photons. However, it is challenging to capture single photons emitted from a single-molecule ECL reaction at a specific location, thus limiting high-quality imaging applications. We developed the nanoreactors based on Ru(bpy)₃²⁺-doped nanoporous zeolite nanoparticles (Ru@zeolite) for direct visualization of nanoconfinement-enhanced ECL reactions. Each nanoreactor not only acts as a matrix to host Ru(bpy)₃²⁺ molecules but also provides a nanoconfined environment for the collision reactions of Ru(bpy)₃²⁺ and co-reactant radicals to realize efficient in situ ECL reactions. The nanoscale confinement resulted in enhanced ECL. Using such nanoreactors as ECL probes, a dual-signal sensing protocol for visual tracking of a single biomolecule was performed. High-resolution imaging of single membrane proteins on heterogeneous cells was effectively addressed with near-zero backgrounds. This could provide a more sensitive tool for imaging individual biomolecules and significantly advance ECL imaging in biological applications.

Recent advances in label-free imaging of cell-matrix adhesions

Cell-matrix adhesions play an essential role in mediating and regulating many biological processes. The adhesion receptors, typically transmembrane integrins, provide dynamic correlations between intracellular environments and extracellular matrixes (ECMs) by bi-directional signaling. In-depth investigations of cell-matrix adhesion and integrin-mediated cell adhesive force are of great significance in biology and medicine. The emergence of advanced imaging techniques and principles has facilitated the understanding of the molecular composition and structure dynamics of cell-matrix adhesions, especially the label-free imaging methods that can be used to study living cell dynamics without immunofluorescence staining. This highlight article aims to give an overview of recent developments in imaging cell-matrix adhesions in a label-free manner. Electrochemiluminescence microscopy (ECLM) and surface plasmon resonance microscopy (SPRM) are briefly introduced and their applications in imaging analysis of cell-matrix adhesions are summarized. Then we highlight the advances in mapping cell-matrix adhesion force based on molecular tension probes and fluorescence microscopy (collectively termed as MTFM). The biomaterials including polyethylene glycol (PEG), peptides and DNA for constructing tension probes in MTFM are summarized. Finally, the outlook and perspectives on the further developments of cell-matrix adhesion imaging are presented.

Electrochemiluminescence Distance and Reactivity of Coreactants Determine the Sensitivity of Bead-Based Immunoassays

Herein we report the study of electrochemiluminescence (ECL) generation by tris(2,2'-bipyridyl)ruthenium (Ru(bpy)₃ ²⁺ ) and five tertiary amine coreactants. The ECL distance and lifetime of coreactant radical cations were measured by ECL self-interference spectroscopy. And the reactivity of coreactants was quantitatively evaluated in terms of integrated ECL intensity. By statistical analysis of ECL images of single Ru(bpy)₃ ²⁺ -labeled microbeads, we propose that ECL distance and reactivity of coreactant codetermine the emission intensity and thus the sensitivity of immunoassay. 2,2-bis(hydroxymethyl)-2,2',2''-nitrilotriethanol (BIS-TRIS) can well balance ECL distance-reactivity trade-off and enhance the sensitivity by 236 % compared with tri-n-propylamine (TPrA) in the bead-based immunoassay of carcinoembryonic antigen. The study brings an insightful understanding of ECL generation in bead-based immunoassay and a way of maximizing the analytical sensitivity from the aspect of coreactant.

Direct Visualization of Nanoconfinement Effect on Nanoreactor via Electrochemiluminescence Microscopy

Nanoconfinement in mesoporous nanoarchitectures could dramatically change molecular transport and reaction kinetics during electrochemical process. A molecular-level understanding of nanoconfinement and mass transport is critical for the applications, but a proper route to study it is lacking. Herein, we develop a single nanoreactor electrochemiluminescence (SNECL) microscopy based on Ru(bpy)₃ ²⁺ -loaded mesoporous silica nanoparticle to directly visualize in situ nanoconfinement-enhanced electrochemical reactions at the single molecule level. Meanwhile, mass transport capability of single nanoreactor, reflected as long decay time and recovery ability, is monitored and simulated with a high spatial resolution. The nanoconfinement effects in our system also enable imaging single proteins on cellular membrane. Our SNECL approach may pave the way to decipher the nanoconfinement effects during electrochemical process, and build bridges between mesoporous nanoarchitectures and potential electrochemical applications.

Recent Progress in Plasmonic based Electrochemiluminescence Biosensors: A Review

Electrochemiluminescence (ECL) analysis has become a powerful tool in recent biomarker detection and clinic diagnosis due to its high sensitivity and broad linear range. To improve the analytical performance of ECL biosensors, various advanced nanomaterials have been introduced to regulate the ECL signal such as graphene, gold nanomaterials, and quantum dots. Among these nanomaterials, some plasmonic nanostructures play important roles in the fabrication of ECL biosensors. The plasmon effect for the ECL signal includes ECL quenching by resonant energy transfer, ECL enhancement by surface plasmon resonance enhancement, and a change in the polarized angle of ECL emission. The influence can be regulated by the distance between ECL emitters and plasmonic materials, and the characteristics of polarization angle-dependent surface plasmon coupling. This paper outlines the recent advances of plasmonic based ECL biosensors involving various plasmonic materials including noble metals and semiconductor nanomaterials. The detection targets in these biosensors range from small molecules, proteins, nucleic acids, and cells thanks to the plasmonic effect. In addition to ECL biosensors, ECL microscopy analysis with plasmonic materials is also highlighted because of the enhanced ECL image quality by the plasmonic effect. Finally, the future opportunities and challenges are discussed if more plasmonic effects are introduced into the ECL realm.

Cathodic Electrochemiluminesence Microscopy for Imaging of Single Carbon Nanotube and Nucleolin at Single Tumor Cell

Cathodic electrochemiluminesence (ECL) microscopy based on luminol analog L012 was originally established to implement the imaging of a single nanotube and nucleolin on a single tumor cell. This microscopy utilizes multiwalled carbon nanotubes (MWCNTs) as advanced coreactant accelerators to efficiently convert dissolved oxygen (O₂) and H₂O₂ into reactive oxygen species (ROS) due to excellent electrocatalytic properties. The produced ROS could oxide L012 into an excited state of L012 leading to a bright cathodic ECL illumination, thereby promoting ECL imaging of MWCNTs at a low triggering potential. After being modified with AS1411 aptamers, MWCNTs@AS1411 probes were incubated with tumor cells for specific ECL imaging of nucleolin on the plasma membrane, which permits cathodic ECL microscopy for label-free bioassays without ECL tags. The L012-based cathodic ECL microscopy with a moderate operating potential and label-free characteristics provides a universal approach in single nanomaterial and single-cell imaging and analyses.

Voltammetric Study and Modeling of the Electrochemical Oxidation Process and the Adsorption Effects of Luminol and Luminol Derivatives on Glassy Carbon Electrodes

Luminol is one of the most widely used electrochemiluminescence (ECL) reagents, yet the detailed mechanism and kinetics of the electrochemical oxidation of luminol remain unclear. We propose a model that describes the electrochemical oxidation of luminol as multiple electron transfer reactions followed by an irreversible chemical reaction, and we applied a finite element method simulation to analyze the electron transfer kinetics in alkaline solutions. Although negligible at higher pH values, the adsorption of luminol on the glassy carbon electrode became noticeable in a solution with pH = 12. Additionally, various types of adsorption behaviors were observed for luminol derivatives and analogues, indicating that the molecular structure affected not only the oxidation but also the adsorption process. The adsorption effect was analyzed through a model with a Langmuir isotherm to show that the saturated surface concentration as well as the reaction kinetics increased with decreasing pH, suggesting a competition for the active sites between the molecule and OH^-. Moreover, we show that the ECL intensity could be boosted through the adsorption effect by collecting the ECL intensity generated through the electrochemical oxidation of luminol and a luminol analogue, L012, in a solution with pH = 13. In contrast with luminol, a significant adsorption effect was observed for L012 at pH = 13, and the ECL intensity was enhanced by the adsorbed species, especially at higher scan rates. The magnitude of the enhancement of the ECL intensity matched well with the simulation using our model.

Advances in electrochemiluminescence for single-cell analysis

Recent years have witnessed the emergence of innovative analytical methods with high sensitivity and spatiotemporal resolution that allowed qualitative and quantitative analysis to be carried out at single-cell and subcellular levels. Electrochemiluminescence (ECL) is a unique chemiluminescence of high-energy electron transfer triggered by electrical excitation. The ingenious combination of electrochemistry and chemiluminescence results in the distinct advantages of high sensitivity, a wide dynamic range and good reproducibility. Specifically, single-cell ECL (SCECL) analysis with excellent spatiotemporal resolution has emerged as a promising toolbox in bioanalysis for revealing individual cells' heterogeneity and stochastic processes. This review focuses on advances in SCECL analysis and bioimaging. The history and recent advances in ECL probes and strategies for system design are briefly reviewed. Subsequently, the latest advances in representative SCECL analysis techniques for bioassays, bioimaging and therapeutics are also highlighted. Then, the current challenges and future perspectives are discussed.

Designing inorganically functionalized magic-size II-VI clusters and unraveling their surface states

Surface engineering is a critical step in the functionalization of nanomaterials to improve their optical and electrochemical properties. However, this process remains a challenge in II-VI magic-size clusters (MSCs) due to their high sensitivity to the environment. Herein, we developed a general surface modification strategy to design all-inorganic MSCs by using certain metal salts (cation = Zn2+, In3+; Anion = Cl-, NO3 -, OTf-) and stabilized (CdS)34, (CdSe)34 and (ZnSe)34 MSCs in polar solvents. We further investigated the surface states of II-VI MSCs using electrochemiluminescence (ECL). The mechanism study revealed that the ECL emission was attributed to . Two ECL emissions at 556 nm and 530 nm demonstrated two surface passivation modes on (CdS)34 MSCs, which can be tuned by the surface ligands. The achievement of surface engineering opens a new design space for functional MSC compounds.

Dual signal magnification for ultrasensitive biosensing based on well-regulated SERS of AuNTs@AuHg and DSN-assisted amplification

AuNTs@AuHg alloy with well-regulated SERS properties was proposed, which displayed wonderful SERS intensity and effective salt resistance. Using miRNA-21 as a model analyte and combining with DSN-assisted amplification, a dual signal amplification strategy for ultrasensitive miRNA biosensing with a low detection limit (0.53 fM) and satisfactory selectivity was designed.

Dual-wavelength electrochemiluminescence biosensor based on a multifunctional Zr MOFs@PEI@AuAg nanocomposite with intramolecular self-enhancing effect for simultaneous detection of dual microRNAs

Rapid parallel detection of multi-targets has always been an exploration aim in electrochemiluminescence (ECL) assays. Herein, a multifunctional nanocomposite of Zr metal-organic frameworks (MOFs) @PEI@AuAg nanoclusters (NCs) with intense and stable dual-wavelength ECL was synthesized for the first time, and used to construct a new ECL biosensor for rapid simultaneous detection of dual targets. Notably, the novel ECL emitter Zr MOFs with high-performance was not only integrated with a co-reactant polyethyleneimine (PEI) to form a unique intramolecular self-enhancing structure, but also loaded a large number of another ECL emitter AuAg NCs, furthermore, AuAg NCs with superior electron transfer property can much enhance the electrical conductivity of the composites, thus achieving the goal of "killing three birds with one stone". Moreover, a unique stable and rigid three-dimensional DNA tetrahedron (TDN) structure was connected with two quenching probes BHQ1 and BHQ3 and immobilized on the composites-modified electrode, so ECL emission of the nanocomposites at two wavelengths of 535 nm and 644 nm were both quenched by resonance energy transfer (RET). In the presence of target miRNAs, the efficient DNA cycling double-amplification processes were performed by using exonuclease (T7 Exo) combined with DNA Walker, thus both quenching groups were separated to restore the ECL at two wavelengths, achieving simultaneous and rapid ECL detection of two miRNAs. Therefore, this present work not only opens a unique nanocomplex with dual wavelength ECL and self-enhancing performance, but also develops a highly sensitive ECL biosensor with promising value for rapid multi-target analysis in clinical fields.

In Situ Imaging of Endogenous Hydrogen Peroxide Efflux from Living Cells via Bipolar Gold Nanoelectrode Array and Electrochemiluminescence Technology

The integration of a closed bipolar electrode (c-BPE) array and electrochemiluminescence (ECL) detection received a boost in applications in the detection of cell adhesion and disease-related biomarkers. This work proposed a gold nanorod array based c-BPE-ECL system to realize an in situ image of endogenous hydrogen peroxide (H₂O₂) efflux from living cells and parallel analysis of endogenous H₂O₂ released from multiple cells by converting electrochemical signals into optical signals. The gold nanorod array with high density was prepared by a repeating chronopotentiometry procedure with anodic aluminum oxide (AAO) membrane as a template. The c-BPE array was fabricated by assembling poly(dimethylsiloxane) (PDMS) chips on both sides of the gold nanorod array. When an appropriate driving potential is applied, H₂O₂ generated from living cells at the sensing pole was reduced on the gold nanorod, triggering the oxidation of the ECL reagent at the reporting pole, which allowed the detection of H₂O₂ released from living cells. Under phorbol myristate acetate (PMA) stimulation, H₂O₂ released from living HeLa, HepG2, MCF-7, and LO2 cells was determined to be 47, 32.4, 25.7, and 6.3 μM, respectively. This indicated that the amount of H₂O₂ released from PMA-stimulated cancer cells was significantly higher than that from the stimulated normal cells. This work presented a new approach for in situ imaging of H₂O₂ released from living cells and could also be used to detect other electrochemically active or non-electrochemically active molecules through simple cell surface modification, which may have potential applications in cell apoptosis study and disease diagnosis.

Dual-emitting Iridium nanorods combining dual-regulating coreaction accelerator Ag nanoparticles for electrochemiluminescence ratio determination of amyloid-β oligomers

Iridium(III) complexes have been developed as eminent electrochemiluminescence (ECL) luminophores, but their current applications are only limited to anodic ECL emission because of weak cathodic ECL emission. This work explored poly(styrene-co-maleicanhydride) (PSMA) as functional reagent to modulate iridium(III) complexes to simultaneously emit bipolar ECL signals. The prepared iridium(III) nanorods (Ir NRs) were detected strong bipolar ECL emissions at +0.9 V and -2.0 V with N,N-diisopropylethylenediamine (DPEA) and persulfate (S₂O₈^2-) as coreactant, respectively. Meanwhile, Ag nanoparticles (Ag NPs) were developed as dual-regulating coreaction accelerator to boost the bipolar emissions of Ir NRs simultaneously. The dual-emitting Ir NRs coupled with dual-regulating coreaction accelerator Ag NPs facilitated the construction of mono-luminophore-based ECL ratio strategy for detecting amyloid-β oligomers (AβO). When the target AβO appeared, the Mg²⁺-dependent DNAzyme-powered biped walkers were unlocked to cleave single-stranded S1 immobilized on the surface of magnetic beads (MBs), resulting in the production of massive single-stranded ST. Then, the output ST cleaved hairpin H1 captured by Ir NRs modified electrode to produce numerous single strands, which could initiate the hybridization chain reaction (HCR) between Ag NPs-labeled H2 and Ag NPs-labeled H3 to introduce abundant Ag NPs onto the electrode surface. Due to the enhancement effect of Ag NPs on the bipolar ECL emissions from Ir NRs, the ECL ratio detection of AβO was achieved with the detection limit of 0.62 pM. The unique dual-emitting properties of Ir NRs coupled with dual-regulating effect of Ag NPs provided an interesting mono-luminophore-based ECL ratio sensing platform for biological analysis.

Confined Gold Single Atoms-MXene Heterostructure-Based Electrochemiluminescence Functional Material and Its Sensing Application

Herein, based on electronic metal-support interaction (EMSI), a gold single atom confined MXene (Au_SA/MXene) heterostructure was developed as the highly efficient electrochemiluminescence (ECL) functional material, which greatly improved the electrochemical properties and broadened the sensing application of MXenes. Gold single atoms were confined into the vacancy defects of Ti₃C₂T_x MXene, which could effectively avoid the masking of catalytic active sites. Meanwhile, electron transport could be accelerated with the assistance of titanium dioxide on the MXene nanosheets. Therefore, the Au_SA/MXene heterostructure had high catalytic activity and electrical activity to promote hydrogen peroxide to generate free radicals, which achieved high-efficiency ECL. Eventually, the Au_SA/MXene heterostructure was used to construct a Faraday cage-type ECL sensor with fluid nanoislands to detect miRNA-187 in triple-negative breast cancer tumor tissues.

Recent Advances in Single Cell Analysis by Electrochemiluminescence

Understanding biological mechanisms operating in cells is one of the major goals of biology. Since heterogeneity is the fundamental property of cellular systems, single cell measurements can provide more accurate information about the composition, dynamics, and regulatory circuits of cells than population-averaged assays. Electrochemiluminescence (ECL), the light emission triggered by electrochemical reactions, is an emerging approach for single cell analysis. Numerous analytes, ranging from small biomolecules such as glucose and cholesterol, proteins and nucleic acids to subcellular structures, have been determined in single cells by ECL, which yields new insights into cellular functions. This review aims to provide an overview of research progress on ECL principles and systems for single cell analysis in recent years. The ECL reaction mechanisms are briefly introduced, and then the advances and representative works in ECL single cell analysis are summarized. Finally, outlooks and challenges in this field are addressed.

Surface-Sensitive Imaging Analysis of Cell-Microenvironment Interactions by Electrochemiluminescence Microscopy

A complex and heterogeneous cell microenvironment offers not only structural support for cells but also myriad biochemical and biophysical cues. These outside-in signals transmit into cells primarily through integrins, which are the important components of cell-matrix adhesions to direct and maintain cell behaviors and fate. In this work, we report a surface-sensitive imaging methodology for evaluating the difference in cell-matrix adhesions at the single cell level to dissect the impact of the chemical microenvironment on cell behaviors. Cells were cultured on silica nanochannel membrane (SNM) modified indium tin oxide (ITO) electrodes (SNM/ITO) with different terminal surfaces and imaged by electrochemiluminescence microscopy (ECLM). The results show that the surface tethered with Arg-Gly-Asp (RGD) groups can mediate robust cell-microenvironment interaction and those coated with silanol and (3-aminopropyl)triethoxysilane (APTES) groups transmit an intermediate adhesion, while oligo(ethylene glycol) (OEG) coated surface conveys the weakest cell-matrix adhesion. Specific recognition of integrins to different surfaces was further explored in conjunction with selective immunoblocking of different subunits. α6, α5, and α1 integrin subunits were found to recognize SNM, RGD/OEG, and APTES surfaces, respectively. The work provides not only insights into cell-microenvironment interaction but also guideline in the design and development of functional and biomimetic surface materials.

Single Cell Imaging of Electrochemiluminescence-Driven Photodynamic Therapy

We report a photodynamic therapy driven by electrochemiluminescence (ECL). The luminescence generated by Ru(bpy)₃ ²⁺ and co-reactant tripropylamine (TPA) pair acts as both optical readout for ECL imaging, and light source for the excitation of photosensitizer to produce reactive oxygen species (ROS) in photodynamic therapy (PDT) system. The ECL-driven PDT (ECL-PDT) relies on the effective energy transfer from ECL emission to photosensitizer chlorin e6 (Ce6), which sensitizes the surrounding O₂ into ROS. The dynamic process of gradual morphological changes, the variation of cell-matrix adhesions, as well as the increase of cell membrane permeability in the process of ECL-PDT were monitored under ECL microscopy (ECLM) with good spatiotemporal resolution. Combining real-time imaging with ECL-PDT, this new strategy provides not only new insights into dynamic cellular processes, but also promising potential of ECL in clinical applications.

A Flexible Electrochemiluminescence Sensor Equipped With Vertically Ordered Mesoporous Silica Nanochannel Film for Sensitive Detection of Clindamycin

Fast, convenient, and highly sensitive detection of antibiotic is essential to avoid its overuse and the possible harm. Owing to enrichment effect and antifouling ability of ultrasmall nanochannels, the vertically ordered mesoporous silica nanochannel film (VMSF) has great potential in the development of the facile electrochemiluminescence (ECL) sensor for direct and sensitive analysis of antibiotics in complex samples. In this study, we demonstrated a flexible ECL sensor based on a cost-effective electrode covered with a VMSF for sensitive detection of clindamycin. Polyethylene terephthalate coated with indium tin oxide (PET-ITO) is applied as a flexible electrode to grow VMSF using the electrochemically assisted self-assembly (EASA) method. The negatively charged VMSF nanochannels exhibit significant enrichment toward the commonly used cationic ECL luminophores, tris(2,2-bipyridyl) dichlororuthenium (II) (Ru (bpy)₃²⁺). Using the enhanced ECL of Ru (bpy)₃²⁺ by clindamycin, the developed VMSF/PET-ITO sensor can sensitively detect clindamycin. The responses were linear in the concentration range of 10 nM–25 μM and in the concentration range of 25–70 μM. Owing to the nanoscale thickness of the VMSF and the high coupling stability with the electrode substrate, the developed flexible VMSF/PET-ITO sensor exhibits high signal stability during the continuous bending process. Considering high antifouling characteristic of the VMSF, direct analysis of clindamycin in a real biological sample, human serum, is realized.

Electrochemiluminescent Ion-Channeling Framework for Membrane Binding and Transmembrane Activity Assays

Recent upgrades in the electrochemiluminescence (ECL) technique showcased its brilliant knack in probing microscopic biointerfacial events, many of which were actually underlain by the ionotropic membrane processes, yet not being ostensive. Here, by modeling an artificial lipoid-supported porin ensemble, we explore and establish the ECL potency in profiling ion-channel activities. A lipophilic hollowed construct dubbed ZnPC was made out of the dynamic covalent chemistry, and its unique geometry was characterized that configured stoichiometric ECL-emissive units in a cubic stance; while the aliphatic vertices of ZnPC helped it safely snorkel and steadily irradiate in a biofilm fusion. After expounding basic ECL properties, the brightness was traced out in response to halogen contents that was lit up by F^-/Cl^- but down by Br^-/I^-. The overall pattern fitted the Langmuir isotherm, from which the membrane-binding strengths of the four were analyzed, compared, and collaterally examined in impedimetrics. On the other hand, one could derive anionic transmembrane kinetics from the time-dependent ECL statistics that pinpointed the ECL signaling via the nanocage-directed mass-transfer pathway. More data mining unveiled an ECL-featured Hofmeister series and the thermodynamic governing force behind all scenes. Finally, combining with halide-selective fluorometry, the synthetic conduit was identified as an ECL symporter. In short, this work develops a novel ECL model for the evaluation of life-mimicking membrane permeation. It might intrigue the outreach of ECL applications in the measurement of diverse surface-confined transient scenarios, e.g., in vitro gated ion or molecule trafficking, which used to be handled by nanopore and electrofluorochromic assays.

A scaffold of thermally activated delayed fluorescent polymer dots towards aqueous electrochemiluminescence and biosensing applications

Thermally activated delayed fluorescent (TADF) polymer dots were prepared, which enables aqueous electrochemiluminescence of TADF polymer emitters and its biosensor application for the first time.