89Zr Labeled Fe3O4@TiO2 Nanoparticles: In Vitro Afffinities with Breast and Prostate Cancer Cells

Magnetic Resonance Imaging in Breast Cancer Tissue In Vitro after PDT Therapy

Photodynamic therapy (PDT) is increasingly used in modern medicine. It has found application in the treatment of breast cancer. The most common cancer among women is breast cancer. We collected cancer cells from the breast from the material received after surgery. We focused on tumors that were larger than 10 mm in size. Breast cancer tissues for this quantitative non-contrast magnetic resonance imaging (MRI) study could be seen macroscopically. The current study aimed to present findings on quantitative non-contrast MRI of breast cancer cells post-PDT through the evaluation of relaxation times. The aim of this work was to use and optimize a 1.5 T MRI system. MRI tests were performed using a clinical scanner, namely the OPTIMA MR360 manufactured by General Electric HealthCare. The work included analysis of T1 and T2 relaxation times. This analysis was performed using the MATLAB package (produced by MathWorks). The created application is based on medical MRI images saved in the DICOM3.0 standard. T1 and T2 measurements were subjected to the Shapiro-Wilk test, which showed that both samples belonged to a normal distribution, so a parametric t-test for dependent samples was used to test for between-sample variability. The study included 30 sections tested in 2 stages, with consistent technical parameters. For T1 measurements, 12 scans were performed with varying repetition times (TR) and a constant echo time (TE) of 3 ms. For T2 measurements, 12 scans were performed with a fixed repetition time of 10,000 ms and varying echo times. After treating samples with PpIX disodium salt and bubbling with pure oxygen, PDT irradiation was applied. The cell relaxation time after therapy was significantly shorter than the cell relaxation time before PDT. The cells were exposed to PpIX disodium salt as the administered pharmacological substance. The study showed that the therapy significantly affected tumor cells, which was confirmed by a significant reduction in tumor cell relaxation time on the MRI results.

153Sm-labeled Fe3O4@lapatinib nanoparticles as a potential therapeutic agent for breast cancer: synthesis, quality control, and in vivo evaluation

The present study introduces Fe3O4-coated lapatinib-labeled 153Sm nanoparticles (denoted as Fe3O4@lapatinib-153Sm) as a promising avenue for advancing breast cancer treatment. The radiolabeled nanoparticles combine various attributes, offering enhanced therapeutic precision. The integration of lapatinib confers therapeutic effects and targeted delivery. The inherent magnetic characteristics of Fe3O4 nanoparticles contribute to improved imaging contrast and targeted localization. Incorporating the gamma-emitting 153Sm isotope permits single-photon emission computed tomography imaging and radiation dose evaluation, while its beta-emitting nature ensures targeted cancer cell eradication. The synthesis of Fe3O4@lapatinib-153Sm was meticulously optimized by investigating the effects of parameters on radiolabeling efficiency. Physicochemical attributes were scrutinized using several analytical techniques. In-depth in vivo assessment evaluated the biocompatibility, toxicity, and biodistribution in a murine model, illuminating clinical utility. Optimal conditions (153SmCl3 concentration of 10 mCi mL-1, pH 7.4, a reaction time of 30 min, and a temperature of 25 °C) achieved >99% labeling efficiency and radiochemical purity. The TEM analysis indicated that the diameter of Fe3O4@lapatinib-153Sm nanoparticles ranged from 10 to 40 nm. Vibrating-sample magnetometry verified their superparamagnetic behaviour with a saturation magnetization of 41.4 emu g-1. The synthesized radiopharmaceutical exhibited high sterility and in vitro stability. Acute toxicity studies showed the mild effects of Fe3O4@lapatinib-153Sm at a dose of 20 mCi kg-1, with no observed mortality. Notably, lesions from Fe3O4@lapatinib-153Sm use recovered naturally over time. Radiation doses below 20 mCi kg-1 were recommended for clinical trials. The biodistribution study in BT474 xenograft mice revealed rapid clearance of Fe3O4@lapatinib-153Sm within 48 h. Significant accumulation occurred in the liver, spleen, and tumor tissue, while minimal accumulation was found in other tissues. Future steps involve studying biocorona formation and therapeutic efficacy on tumour models, refining its clinical potential.

Nanoparticles labeled with gamma-emitting radioisotopes: an attractive approach for in vivo tracking using SPECT imaging

Providing accurate molecular imaging of the body and biological process is critical for diagnosing disease and personalizing treatment with the minimum side effects. Recently, diagnostic radiopharmaceuticals have gained more attention in precise molecular imaging due to their high sensitivity and appropriate tissue penetration depth. The fate of these radiopharmaceuticals throughout the body can be traced using nuclear imaging systems, including single-photon emission computed tomography (SPECT) and positron emission tomography (PET) modalities. In this regard, nanoparticles are attractive platforms for delivering radionuclides into targets because they can directly interfere with the cell membranes and subcellular organelles. Moreover, applying radiolabeled nanomaterials can decrease their toxicity concerns because radiopharmaceuticals are usually administrated at low doses. Therefore, incorporating gamma-emitting radionuclides into nanomaterials can provide imaging probes with valuable additional properties compared to the other carriers. Herein, we aim to review (1) the gamma-emitting radionuclides used for labeling different nanomaterials, (2) the approaches and conditions adopted for their radiolabeling, and (3) their application. This study can help researchers to compare different radiolabeling methods in terms of stability and efficiency and choose the best way for each nanosystem.

Radiolabeled Iron Oxide Nanoparticles as Dual Modality Contrast Agents in SPECT/MRI and PET/MRI

During the last decades, the utilization of imaging modalities such as single photon emission computed tomography (SPECT), positron emission tomography (PET), and magnetic resonance imaging (MRI) in every day clinical practice has enabled clinicians to diagnose diseases accurately at early stages. Radiolabeled iron oxide nanoparticles (RIONs) combine their intrinsic magnetic behavior with the extrinsic character of the radionuclide additive, so that they constitute a platform of multifaceted physical properties. Thus, at a practical level, RIONs serve as the physical parent of the so-called dual-modality contrast agents (DMCAs) utilized in SPECT/MRI and PET/MRI applications due to their ability to combine, at real time, the high sensitivity of SPECT or PET together with the high spatial resolution of MRI. This review focuses on the synthesis and in vivo investigation of both biodistribution and imaging efficacy of RIONs as potential SPECT/MRI or PET/MRI DMCAs.

Manganese oxide nanomaterials for bacterial infection detection and therapy

Bacterial infection has received substantial attention and poses a serious threat to human health. Although antibiotics can effectively fight against bacterial infection, the occurrence of antibiotic resistance has become increasingly serious in recent years, which tremendously hinders its clinical application. Consequently, it is urgent to explore novel strategies to achieve efficacious treatment of bacterial diagnosis and detection. Manganese dioxide (MnO₂) nanomaterial has been extensively reported in tumor therapy. Nevertheless, there are few antibacterial reviews of MnO₂. Herein, we will discuss the applications of MnO₂ in the detection and treatment of bacterial infection, including photodynamic therapy, immunotherapy, improvement of hypoxia, dual-modal combination therapy, reactive oxygen species scavenging, magnetic resonance imaging, optical application of acoustic imaging, and so forth. This review is expected to provide meaningful guidance on further research of MnO₂ nanomaterial for antibacterial applications.

Synthesis and morphological studies of Tc-99m-labeled lupulone-conjugated Fe3O4@TiO2 nanocomposite, and in vitro cytotoxicity activity on prostate cancer cell lines

The purpose of this study was to develop a multifunctional theranostic probe for imaging (magnetic resonance imaging [MRI] and single-photon emission computed tomography [SPECT]) and therapy (photodynamic therapy). For this purpose, Tc-99m-labeled lupulone-conjugated Fe₃O₄@TiO₂ nanocomposites (^99mTc-DTPA-Fe₃O₄@TiO₂-HLP and ^99mTc-DTPA-Fe₃O₄@TiO₂-ALP nanocomposites) were synthesized. The average diameter of the nanocomposites was 171 ± 20 nm as seen on transmission electron microscopy images. Fe₃O₄@TiO₂ nanocomposites exhibited fluorescence spectra at an emission wavelength of 314 nm. Lupulone-conjugated Fe₃O₄@TiO₂ nanocomposites were spherical-shaped with a suitable dispersion and without visible aggregation, and their radiolabeling yields were over 85%. Healthy (RWPE-1 normal human prostate epithelial cell line) and cancer prostate cell lines (PC-3 human prostate cancer cell line) were used to determine the in vitro biological behavior of the nanocomposites. The PC-3 cells treated with lupulone-conjugated Fe₃O₄@TiO₂ nanocomposites showed a lower cell viability compared with RWPE-1 cells treated with lupulone-conjugated Fe₃O₄@TiO₂ nanocomposites. Lupulone-modified Fe₃O₄@TiO₂ nanocomposites may serve in the future as a multifunctional probe for positron emission tomography (PET)/MRI, photodynamic therapy, and hyperthermia therapy of cancer.

Radiolabelling of nanomaterials for medical imaging and therapy

Nanomaterials offer unique physical, chemical and biological properties of interest for medical imaging and therapy. Over the last two decades, there has been an increasing effort to translate nanomaterial-based medicinal products (so-called nanomedicines) into clinical practice and, although multiple nanoparticle-based formulations are clinically available, there is still a disparity between the number of pre-clinical products and those that reach clinical approval. To facilitate the efficient clinical translation of nanomedicinal-drugs, it is important to study their whole-body biodistribution and pharmacokinetics from the early stages of their development. Integrating this knowledge with that of their therapeutic profile and/or toxicity should provide a powerful combination to efficiently inform nanomedicine trials and allow early selection of the most promising candidates. In this context, radiolabelling nanomaterials allows whole-body and non-invasive in vivo tracking by the sensitive clinical imaging techniques positron emission tomography (PET), and single photon emission computed tomography (SPECT). Furthermore, certain radionuclides with specific nuclear emissions can elicit therapeutic effects by themselves, leading to radionuclide-based therapy. To ensure robust information during the development of nanomaterials for PET/SPECT imaging and/or radionuclide therapy, selection of the most appropriate radiolabelling method and knowledge of its limitations are critical. Different radiolabelling strategies are available depending on the type of material, the radionuclide and/or the final application. In this review we describe the different radiolabelling strategies currently available, with a critical vision over their advantages and disadvantages. The final aim is to review the most relevant and up-to-date knowledge available in this field, and support the efficient clinical translation of future nanomedicinal products for in vivo imaging and/or therapy.