Controlled shear affinity filtration (CSAF): a new technology for integration of cell separation and protein isolation from mammalian cell cultures

Bioprocess development of a stable FUT8-/--CHO cell line to produce defucosylated anti-HER2 antibody

In recent years, an increasing number of defucosylated therapeutic antibodies have been applied in clinical practices due to their better efficacy compared to fucosylated counterparts. The establishment of stable and clonal manufacturing cell lines is the basis of therapeutic antibodies production. Bioprocess development of a new cell line is necessary for its future applications in the biopharmaceutical industry. We engineered a stable cell line expressing defucosylated anti-HER2 antibody based on an established α-1,6-fucosyltransferase (FUT8) gene knockout CHO-S cell line. The optimization of medium and feed was evaluated in a small-scale culture system. Then the optimal medium and feed were scaled up in a bioreactor system. After fed-batch culture over 13 days, we evaluated the cell growth, antibody yield, glycan compositions and bioactivities. The production of anti-HER2 antibody from the FUT8 gene knockout CHO-S cells in the bioreactor increased by 37% compared to the shake flask system. The N-glycan profile of the produced antibody was consistent between the bioreactor and shake flask system. The antibody-dependent cellular cytotoxicity activity of the defucosylated antibody increased 14-fold compared to the wild-type antibody, which was the same as our previous results. The results of our bioprocess development demonstrated that the engineered cell line could be developed to a biopharmaceutical industrial cell line.

Mimic of a large-scale diafiltration process by using ultra scale-down rotating disc filter

Ultra scale-down (USD) approach is a powerful tool to predict large-scale process performance by using very small amounts of material. In this article, we present a method to mimic flux and transmission performance in a labscale crossflow operation by an USD rotating disc filter (RDF). The Pellicon 2 labscale system used for evaluation of the mimic can readily be related to small pilot and industrial scale. Adopted from the pulsed sample injection technique by Ghosh and Cui (J Membr Sci. 2000;175:5-84), the RDF has been modified by building in inserts to allow the flexibility of the chamber volume, so that only 1.5 mL of processing material is required for each diafiltration experiment. The reported method enjoys the simplicity of dead-end mode operation with accurate control of operation conditions that can mimic well the crossflow operation in large scale. Wall shear rate correlations have been established for both the labscale cassette and the USD device, and a mimic has been developed by operating both scales under conditions with equivalent averaged shear rates. The studies using E. coli lysate show that the flux vs. transmembrane pressure profile follows a first-order model, and the transmission of antibody fragment (Fab') is independent of transmembrane pressure. Predicted flux and transmission data agreed well with the experimental results of a labscale diafiltration where the cassette resistance was considered.

Enabling technologies: fermentation and downstream processing

Efficient parallel tools for bioprocess design, consequent application of the concepts for metabolic process analysis as well as innovative downstream processing techniques are enabling technologies for new industrial bioprocesses from an engineering point of view. Basic principles, state-of-the-art techniques and cutting-edge technologies are briefly reviewed. Emphasis is on parallel bioreactors for bioprocess design, biochemical systems characterization and metabolic control analysis, as well as on preparative chromatography, affinity filtration and protein crystallization on a process scale.

Optimizing the rotor design for controlled-shear affinity filtration using computational fluid dynamics

Controlled shear affinity filtration (CSAF) is a novel integrated processing technology that positions a rotor directly above an affinity membrane chromatography column to permit protein capture and purification directly from cell culture. The conical rotor is intended to provide a uniform and tunable shear stress at the membrane surface that inhibits membrane fouling and cell cake formation by providing a hydrodynamic force away from and a drag force parallel to the membrane surface. Computational fluid dynamics (CFD) simulations are used to show that the rotor in the original CSAF device (Vogel et al., 2002) does not provide uniform shear stress at the membrane surface. This results in the need to operate the system at unnecessarily high rotor speeds to reach a required shear stress of at least 0.17 Pa at every radial position of the membrane surface, compromising the scale-up of the technology. Results from CFD simulations are compared with particle image velocimetry (PIV) experiments and a numerical solution for low Reynolds number conditions to confirm that our CFD model accurately describes the hydrodynamics in the rotor chamber of the CSAF device over a range of rotor velocities, filtrate fluxes, and (both laminar and turbulent) retentate flows. CFD simulations were then carried out in combination with a root-finding method to optimize the shape of the CSAF rotor. The optimized rotor geometry produces a nearly constant shear stress of 0.17 Pa at a rotational velocity of 250 rpm, 60% lower than the original CSAF design. This permits the optimized CSAF device to be scaled up to a maximum rotor diameter 2.5 times larger than is permissible in the original device, thereby providing more than a sixfold increase in volumetric throughput.

Integrated bioprocesses

Integrated bioprocesses have been developed to optimise yield and cost-effectiveness of production of low and high molecular weight molecules. Low molecular weight products are removed from the cultivation medium with in situ extraction, in situ adsorption or crystallisation to avoid product inhibition. One-pot processes are being developed to replace two-stage reactions. Recent developments in the integrated purification of high molecular weight products focus mainly on the integration of solid/liquid separation and initial product recovery such as expanded bed adsorption or extraction in aqueous two-phase systems. Additionally, new approaches for a more efficient processing of inclusion bodies have been developed.

Alternative bioseparation operations: life beyond packed-bed chromatography

Chromatography is undoubtedly the workhorse of downstream processes, affording high resolution for bioseparations. At the same time, it has the notoriety of being the single largest cost center in downstream processing and of being a low-throughput operation. Consequently, 'chromatography alternatives' are an attractive proposition, even if only a reduction in the extent of use of packed beds can be realized. This paper reviews the current state of unit operations posing as chromatography alternatives--including membrane filtration, aqueous two-phase extraction, three-phase partitioning, precipitation, crystallization, monoliths and membrane chromatography--and their potential to do the unthinkable.

CFD-aided design of a dynamic filter for mammalian cell separation

In the present work, a rotating disk filter was designed for mammalian cell separation with the aim of avoiding both cell damage and membrane fouling. Different geometric and operational variables of the rotating disk filter were studied using computational fluid dynamics (CFD) by varying rotor radius, rotor angle, membrane-rotor distance, and angular velocity. The combinations of these variables followed a statistical design, so that an analysis of the CFD results provided correlations describing the average shear stress on the membrane surface and the maximum shear stress in the whole module as a function of the variables studied. Based on these correlations, and on the shear resistance levels of Chinese hamster ovary (CHO) and baby hamster kidney (BHK) cell lines, which were investigated using a cone-and-plate viscosimeter, it was possible to determine the geometry and angular velocity that would minimize both cell damage and membrane fouling. After construction, the filter was tested in filtration experiments at increasing permeate fluxes. Cell viability remained >90% for the duration of the experiments (2.5 h), and no indication of fouling was observed. It was shown that the designed dynamic filter is able to effectively avoid both cell damage and membrane fouling, and thus can be used for mammalian cell harvesting and perfusion.