Secreted production of collagen-inspired gel-forming polymers with high thermal stability in Pichia pastoris

Green biomanufacturing in recombinant collagen biosynthesis: trends and selection in various expression systems

Collagen, classically derived from animal tissue, is an all-important protein material widely used in biomedical materials, cosmetics, fodder, food, etc. The production of recombinant collagen through different biological expression systems using bioengineering techniques has attracted significant interest in consideration of increasing market demand and the process complexity of extraction. Green biomanufacturing of recombinant collagen has become one of the focus topics. While the bioproduction of recombinant collagens (type I, II, III, etc.) has been commercialized in recent years, the biosynthesis of recombinant collagen is extremely challenging due to protein immunogenicity, yield, degradation, and other issues. The rapid development of synthetic biology allows us to perform a heterologous expression of proteins in diverse expression systems, thus optimizing the production and bioactivities of recombinant collagen. This review describes the research progress in the bioproduction of recombinant collagen over the past two decades, focusing on different expression systems (prokaryotic organisms, yeasts, plants, insects, mammalian and human cells, etc.). We also discuss the challenges and future trends in developing market-competitive recombinant collagens.

Rahman RNZ, Tan JS, Raja Khairuddin RF, Salleh AB, Oslan SN. Determination of Putative Vacuolar Proteases, PEP4 and PRB1 in a Novel Yeast Expression Host Meyerozyma guilliermondii Strain SO Using Bioinformatics Tools

Meyerozyma guilliermondii strain SO, a newly isolated yeast species from spoilt orange, has been used as a host to express the recombinant proteins using methylotrophic yeast promoters. However, as a novel yeast expression system, the vacuolar proteases of this yeast have not been determined, which may have contributed to the low level of heterologous protein secretions. Thus, this study aimed to determine intra- and extracellular proteolytic activity and identify the putative vacuolar proteases using bioinformatics techniques. A clear zone was observed from the nutrient agar skimmed milk screening plate. Proteolytic activity of 117.30 U/ml and 75 U/ml were obtained after 72 h of cultivation for both extracellular and intracellular proteins, respectively. Next, the Hidden Markov model (HMM) was used to detect the presence of the vacuolar proteases (PEP4 and PRB1) from the strain SO proteome. Aspartyl protease (PEP4) with 97.55% identity to Meyerozyma sp. JA9 and a serine protease (PRB1) with 70.91% identity to Candida albicans were revealed. The homology with other yeast vacuolar proteases was confirmed via evolutionary analysis. PROSPER tool prediction of cleavage sites postulated that PEP4 and PRB1 might have caused proteolysis of heterologous proteins in strain SO. In conclusion, two putative vacuolar proteases (PEP4 and PRB1) were successfully identified in strain SO. Further characterization can be done to understand their specific properties, and their effects on heterologous protein expression can be conducted via genome editing.

Global transcriptome profiling reveals genes responding to overproduction of a small secretory, a high cysteine- and a high glycosylation-bearing protein in Yarrowia lipolytica

•

Secretion of a protein results in > 10-fold higher titer compared to its retention.

•

Overproduction of rs-Prots induces oxidative stress and detoxification response.

•

Excessive vacuolar protein degradation limits rs-Prot production in Y. lipolytica.

•

Non-classical export protein NCE102 is upregulated upon rs-Prot overloading.

•

Downregulation of cyclin CLN1 marks growth arrest in G1 under rs-Prot synthesis.

Investigation of the yeast cell’s response to recombinant secretory protein (rs-Prot) overproduction is relevant for both basic and applied research. Imbalance, overloading or stress within this process impacts the whole cell. In the present study, by using steady-state cultures and transcriptomics, we investigated the cellular response of Yarrowia lipolytica challenged with high-level expression of genes encoding proteins with significantly different biochemical characteristics: a small protein retained within the cell i) or secreted ii), a medium size secretory protein with a high number of disulfide bonds iii), or glycosylation sites iv). Extensive analysis of omics data, supported by careful manual curation, led to some anticipated observations on oxidative and unfolded protein stress (CTT1, PXMP2/4, HAC1), glycosylation (ALGs, KTRs, MNTs, MNNs), folding and translocation (SSAs, SSEs) but also generated new exciting knowledge on non-conventional protein secretion (NCE102), transcriptional regulators (FLO11, MHY1, D01353 g, RSFA, E23925g or MAF1), vacuolar proteolysis targets in Y. lipolytica (ATGs, VPSs, HSE1, PRB1, PRC1, PEP4) or growth arrest (CLN1) upon rs-Prots overproduction.

Production of protein-based polymers in Pichia pastoris

Materials science and genetic engineering have joined forces over the last three decades in the development of so-called protein-based polymers. These are proteins, typically with repetitive amino acid sequences, that have such physical properties that they can be used as functional materials. Well-known natural examples are collagen, silk, and elastin, but also artificial sequences have been devised. These proteins can be produced in a suitable host via recombinant DNA technology, and it is this inherent control over monomer sequence and molecular size that renders this class of polymers of particular interest to the fields of nanomaterials and biomedical research. Traditionally, Escherichia coli has been the main workhorse for the production of these polymers, but the methylotrophic yeast Pichia pastoris is finding increased use in view of the often high yields and potential bioprocessing benefits. We here provide an overview of protein-based polymers produced in P. pastoris. We summarize their physicochemical properties, briefly note possible applications, and detail their biosynthesis. Some challenges that may be faced when using P. pastoris for polymer production are identified: (i) low yields and poor process control in shake flask cultures; i.e., the need for bioreactors, (ii) proteolytic degradation, and (iii) self-assembly in vivo. Strategies to overcome these challenges are discussed, which we anticipate will be of interest also to readers involved in protein expression in P. pastoris in general.

Mechanics of composite hydrogels approaching phase separation

For polymer-particle composites, limited thermodynamic compatibility of polymers and particles often leads to poor dispersal and agglomeration of the particles in the matrix, which negatively impacts the mechanics of composites. To study the impact of particle compatibility in polymer matrices on the mechanical properties of composites, we here study composite silica- protein based hydrogels. The polymer used is a previously studied telechelic protein-based polymer with end groups that form triple helices, and the particles are silica nanoparticles that only weakly associate with the polymer matrix. At 1mM protein polymer, up to 7% of silica nanoparticles can be embedded in the hydrogel. At higher concentrations the system phase separates. Oscillatory rheology shows that at high frequencies the particles strengthen the gels by acting as short-lived multivalent cross-links, while at low frequencies, the particles reduce the gel strength, presumably by sequestering part of the protein polymers in such a way that they can no longer contribute to the network strength. As is generally observed for polymer/particle composites, shear-induced polymer desorption from the particles leads to a viscous dissipation that strongly increases with increasing particle concentration. While linear rheological properties as function of particle concentration provide no signals for an approaching phase separation, this is very different for the non-linear rheology, especially fracture. Strain-at-break decreases rapidly with increasing particle concentration and vanishes as the phase boundary is approached, suggesting that the interfaces between regions of high and low particle densities in composites close to phase separation provide easy fracture planes.

Detection and Elimination of Cellular Bottlenecks in Protein-Producing Yeasts

Yeasts are efficient cell factories and are commonly used for the production of recombinant proteins for biopharmaceutical and industrial purposes. For such products high levels of correctly folded proteins are needed, which sometimes requires improvement and engineering of the expression system. The article summarizes major breakthroughs that led to the efficient use of yeasts as production platforms and reviews bottlenecks occurring during protein production. Special focus is given to the metabolic impact of protein production. Furthermore, strategies that were shown to enhance secretion of recombinant proteins in different yeast species are presented.

Disruption of genes involved in CORVET complex leads to enhanced secretion of heterologous carboxylesterase only in protease deficient Pichia pastoris

The methylotrophic yeast Pichia pastoris (Komagataella spp.) is a popular microbial host for the production of recombinant proteins. Previous studies have shown that mis-sorting to the vacuole can be a bottleneck during production of recombinant secretory proteins in yeast, however, no information was available for P. pastoris. In this work the authors have therefore generated vps (vacuolar protein sorting) mutant strains disrupted in genes involved in the CORVET (class C core vacuole/endosome tethering) complex at the early stages of endosomal sorting. Both Δvps8 and Δvps21 strains contained lower extracellular amounts of heterologous carboxylesterase (CES) compared to the control strain, which could be attributed to a high proteolytic activity present in the supernatants of CORVET engineered strains due to rerouting of vacuolar proteases. Serine proteases were identified to be responsible for this proteolytic degradation by liquid chromatography-mass spectrometry and protease inhibitor assays. Deletion of the major cellular serine protease Prb1 in Δvps8 and Δvps21 strains did not only rescue the extracellular CES levels, but even outperformed the parental CES strain (56 and 80% higher yields, respectively). Further deletion of Ybr139W, another serine protease, did not show a further increase in secretion levels. Higher extracellular CES activity and low proteolytic activity were detected also in fed batch cultivation of Δvps21Δprb1 strains, thus confirming that modifying early steps in the vacuolar pathway has a positive impact on heterologous protein secretion.

Disruption of YPS1 and PEP4 genes reduces proteolytic degradation of secreted HSA/PTH in Pichia pastoris GS115

Human serum albumin (HSA) and human parathyroid hormone (1-34) [PTH (1-34)] fusion protein [HSA/PTH (1-34)] is a promising long-acting form of PTH (1-34) for osteoporosis treatment. Secretory expression of intact HSA/PTH (1-34) in Pichia pastoris GS115 was accompanied by two degradation fragments, with molecular weights around 66 kDa, in addition to the well-known ~45 kDa HSA-truncated fragment, resulting in a low yield of intact protein. In this study, two internal cleavage sites were identified in the PTH (1-34) portion of the fusion protein by Western Blot analysis. To minimize proteolytic cleavages, several protease genes including PEP4 (encoding proteinase A), PRB1 (proteinase B) and seven YPSs genes (yapsin family members) were knocked out respectively by disruption of the individual genes and the selective combinations. Reduced degradation was observed by single disruption of either PEP4 gene or YPS1 gene, and the lowest level of degradation was observed in a pep4△yps1△ double disruptant. After 72 h of induction, more than 80 % of the HSA/PTH (1-34) secreted by the pep4△yps1△ double disruptant remained intact, in comparison to only 30 % with the wild-type strain.