Comprehensive study of the organic-solvent-free CDI-mediated acylation of various nucleophiles by mechanochemistry

NMI-SO2Cl2-Mediated Amide Bond Formation: Facile Synthesis of Some Dihydrotriazolopyrimidine Amide Derivatives as Potential Anti-Inflammatory and Anti-Tubercular Agents

Facile access to some novel biologically relevant dihydrotriazolopyrimidine carboxylic acid-derived amide analogues using NMI/SO2Cl2, and aromatic and aliphatic primary and secondary amines, is reported herein. The role of N-methylimidazole (NMI) as the base and sulfuryl chloride (SO2Cl2) as the coupling reagent has been effectively realized in accessing these molecules in good to excellent yields. The feasibility of the developed protocol has also been extended to the gram-scale synthesis of N-benzylbenzamide in a 75% yield from benzoic acid and benzyl amine. The newly synthesized compounds were tested via in vitro anti-inflammatory and anti-tubercular activity studies. The compounds 6aa and 6be were found to be the most active anti-inflammatory agents, whereas 6cb and 6ch were found to exhibit promising anti-tubercular potency when compared to other synthesized molecules. The structure-activity relationship (SAR) studies revealed the importance of the presence of electron-donating functionalities in enhancing the anti-inflammatory potential of the newly synthesized molecules. However, the presence of electron-withdrawing substituents was found to be significant for improving their anti-tubercular potency.

Hexylsilane-mediated direct amidation of amino acids with a catalytic amount of 1,2,4-triazole

In this study, we report amino acid amidation using hexylsilane and a catalytic amount of 1,2,4-triazole. The conventional protection/deprotection method for the α-amino group of amino acids is not required. The corresponding α-amino amides were obtained in moderate to good yields with low to no racemization.

Ambient-Temperature, Metal-Free, CDI-Mediated Ex-Situ Conversion of Acids to Amides: A Useful Late-Stage Strategy

An efficient ex-situ method for the amidation of carboxylic acids mediated by CDI has been disclosed herewith. This metal-free strategy is performed at ambient temperature and can be applied effectively for late-stage modification of amino acids and APIs.

Green metrics in mechanochemistry

The development of new green methodologies and their broader adoption for promoting sustainable development in chemistry laboratories and industry play a significant role in society, due to the economic importance of chemistry and its widespread presence in everyday life. Therefore, a sustainable approach to chemistry contributes to the well-being of the worldwide population and complies with the United Nations Sustainable Development Goals (UN SDGs) and the European Green Deal. The review highlights how batch and continuous mechanochemical methods are an eco-friendly approach for organic synthesis, with a lower environmental footprint in most cases, compared to solution-based procedures. The assessment is objectively based on the use of green metrics (e.g., atom and real atom economy, E-factor, process mass intensity, material parameter recovery, Eco-scale, stoichiometric factor, etc.) and indicators (e.g. DOZN tool and life cycle assessment, LCA, studies) applied to organic transformations such as synthesis of the amide bond, carbamates, heterocycles, active pharmaceutical ingredients (APIs), porphyrins, porous organic polymers (POPs), metal- or acid-catalysed processes, multicomponent and condensation reactions, rearrangements, etc. The generalized absence of bulk solvents, the precise control over the stoichiometry (i.e., using agents in a stoichiometrically rather than in excess), and the more selective reactions enabling simplified work-up procedures are the distinctive factors, marking the superiority of mechanochemical processes over solution-based chemistry.

Induction-heated ball-milling: a promising asset for mechanochemical reactions

While ball-milling is becoming one of the common tools used by synthetic chemists, an increasing number of studies highlight that it is possible to further expand the nature and number of products which can be synthesized, by heating the reaction media during mechanochemical reactions. Hence, developing set-ups enabling heating and milling to be combined is an important target, which has been looked into in both academic and industrial laboratories. Here, we report a new approach for heating up reaction media during ball-milling reactions, using induction heating (referred to as i-BM). Our set-up is attractive not only because it enables a very fast heating of the milling medium (reaching ≈80 °C in just 15 s), and that it is directly adaptable to commercially-available milling equipment, but also because it enables heating either the walls of the milling jars or the beads themselves, depending on the choice of the materials which compose them. Importantly, the possibility to heat a milling medium "from the inside" (when using for example a PMMA jar and stainless steel beads) is a unique feature compared to previously proposed systems. Through numerical simulations, we then show that it is possible to finely tune the properties of this heating system (e.g. heating rate and maximum temperature reached), by playing with the characteristics of the milling system and/or the induction heating conditions used. Lastly, examples of applications of i-BM are given, showing how it can be used to help elucidate reaction mechanisms in ball-milling, to synthesize new molecules, and to control the physical nature of milling media.

A Sustainable Green Enzymatic Method for Amide Bond Formation

A sustainable enzymatic strategy for the preparation of amides by using Candida antarctica lipase B as the biocatalyst and cyclopentyl methyl ether as a green and safe solvent was devised. The method is simple and efficient and it produces amides with excellent conversions and yields without the need for intensive purification steps. The scope of the reaction was extended to the preparation of 28 diverse amides using four different free carboxylic acids and seven primary and secondary amines, including cyclic amines. This enzymatic methodology has the potential to become a green and industrially reliable process for direct amide synthesis.

Synthesis, Structure-Activity Relationship, and Mechanism of a Series of Diarylhydrazide Compounds as Potential Antifungal Agents

A series of simple diarylhydrazide derivatives (45 examples) were well-designed, prepared, and screened for their antifungal activities both in vitro and in vivo. Bioassay results suggested that all designed compounds had significant activity against Alternaria brassicae (EC₅₀ = 0.30-8.35 μg/mL). Among of them, 2c, as the highest activity compound, could effectively inhibit the growth of plant pathogens Pyricularia oryza, Fusarium solani, Alternaria solani, Alternaria brassicae, and Alternaria alternate and was more potent than carbendazim and thiabendazole. 2c showed almost 100% protection at 200 μg/mL in vivo activity against A. solani in tomato. Moreover, 2c did not affect the germination of cowpea seed and the growth of normal human hepatocytes. The preliminary mechanistic exploration documented that 2c could result in the abnormal morphology and irregular structure of the cell membrane, destroy the function of mitochondria, increase the reactive oxygen species, and inhibit the proliferation of hypha cell. The above results manifested that target compound 2c could be a potential fungicidal candidate against phytopathogenic diseases for its excellent fungicidal activities.

Amidation by reactive extrusion for the synthesis of active pharmaceutical ingredients teriflunomide and moclobemide

The solventless synthesis of an amide was performed in a twin-screw extruder in the presence of a coupling agent, providing a high yielding and productive method. The reaction conditions were optimized to prepare APIs, teriflunomide and moclobemide.

Coupling of 3-Aminopropyl Sulfonic Acid to Cellulose Nanofibers for Efficient Removal of Cationic Dyes

A novel anionic nanostructured cellulose derivate was prepared through the coupling of TEMPO-oxidized cellulose nanofibers with 3-aminopropyl sulfonic acid (3-APSA). 3-APSA grafting was variously investigated by FT-IR spectroscopy and transmission electron microscopy (TEM) analysis, confirming a high reaction degree. The surface morphology investigated via scanning electron microscopy (SEM) revealed a more uniform organization of the nanofibers after the 3-APSA coupling, with improvements in terms of fiber packing and pore interconnectivity. This peculiar morphology contributes to improving methylene blue (MB) adsorption and removal efficiency at different operating conditions (pH, initial time, and initial concentration). The results indicated a maximum adsorption capacity of 526 mg/g in the case of 3-APSA grafted nanofibers, over 30% more than that of non-grafted ones (370 mg/g), which confirm a relevant effect of chemical modification on the adsorbent properties of cellulose nanofibers. The adsorption kinetics and isotherms of the current adsorbents match with the pseudo-second-order kinetic and Langmuir isotherm models. This study suggests the use of chemical grafting via 3-APSA is a reliable and facile post-treatment to design bio-sustainable and reusable nanofibers to be used as high-performance adsorbent materials in water pollutant remediation.

A trustworthy mechanochemical route to isocyanides

Isocyanides are hardly produced, dramatically sensitive to purification processes, and complex to handle as synthetic tools. Notwithstanding, they represent one of the most refined and valuable compounds for accessing sophisticated and elegant synthetic routes. A unique interest has always been addressed to their production, though their synthetic pathways usually involve employing strong conditions and toxic reagents. The current paper intends to provide a conceptually innovative synthetic protocol for mechanochemical isocyanide preparation, simultaneously lowering the related reagents' toxicity and improving their purification in a straightforward procedure.

Palladium-Catalyzed Aminocarbonylation of (Hetero)aryl Iodides with α-Amino Acid Esters as Nucleophiles

We report palladium-catalyzed aminocarbonylation of (hetero)aryl iodides with α-amino acid esters as nucleophiles. The synthesized N-capped α-amino acids are biologically important building blocks. The mild conditions provide products with high enantioselectivity at 80 °C in 35 min. The reactions are performed under air in a sealed vessel using chloroform as an in situ CO source. For the first time, regioselective carbonylation of histidine is also presented.

Photocatalytic cross-dehydrogenative coupling reaction toward the synthesis of N,N-disubstituted hydrazides and their bromides

An efficient strategy for the divergent synthesis of N,N-disubstituted hydrazides and their bromides is reported through photoredox-catalytic cross-dehydrogenative coupling of N,N-disubstituted hydrazines and aldehydes.

Simple and Rapid Mechanochemical Synthesis of Lactide and 3S-(Isobutyl)morpholine-2,5-dione-Based Random Copolymers Using DBU and Thiourea

There is a growing interest surrounding morpholine-2,5-dione-based materials due to their impressive biocompatibility as well as their capacity to break down by hydrolytic and enzymatic pathways. In this study, the ring-opening (co)polymerization of leucine-derived 3S-(isobutyl)morpholine-2,5-dione (MD) and lactide (LA) was performed via ball-milling using a catalytic system composed of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) and 3-[3,5-bis(trifluoromethyl)phenyl]-1-cyclohexylthiourea (TU). Once the homopolymerizations of MD and LA optimized and numerous parameters were studied, the mechanochemical ring-opening copolymerization of these monomers was explored. The feasibility of ring-opening copolymerizations in mechanochemical systems was demonstrated and a range of P(MD-co-LA) copolymers were produced with varying proportions of MD (23%, 48%, and 69%). Furthermore, the beneficial cocatalytic effects of TU with regards to ROP control were found to be operative within mechanochemical systems. Further parallels were observed between solution- and mechanochemical-based ROPs.

Sustainability Assessment of Mechanochemistry by Using the Twelve Principles of Green Chemistry

In recent years, mechanochemistry has been growing into a widely accepted alternative for chemical synthesis. In addition to their efficiency and practicality, mechanochemical reactions are also recognized for their sustainability. The association between mechanochemistry and Green Chemistry often originates from the solvent-free nature of most mechanochemical protocols, which can reduce waste production. However, mechanochemistry satisfies more than one of the Principles of Green Chemistry. In this Review we will present a series of examples that will clearly illustrate how mechanochemistry can significantly contribute to the fulfillment of Green Chemistry in a more holistic manner.

Synthetic Strategies for Dinucleotides Synthesis

Dinucleoside 5′,5′-polyphosphates (DNPs) are endogenous substances that play important intra- and extracellular roles in various biological processes, such as cell proliferation, regulation of enzymes, neurotransmission, platelet disaggregation and modulation of vascular tone. Various methodologies have been developed over the past fifty years to access these compounds, involving enzymatic processes or chemical procedures based either on P(III) or P(V) chemistry. Both solution-phase and solid-support strategies have been developed and are reported here. Recently, green chemistry approaches have emerged, offering attracting alternatives. This review outlines the main synthetic pathways for the preparation of dinucleoside 5′,5′-polyphosphates, focusing on pharmacologically relevant compounds, and highlighting recent advances.

Mechanochemical Synthesis and Isomerization of N-Substituted Indole-3-carboxaldehyde Oximes †

Performing solution-phase oximation reactions with hydroxylamine hydrochloride (NH₂OH·HCl) carries significant risk, especially in aqueous solutions. In the present study, four N-substituted indole-3-carboxaldehyde oximes were prepared from the corresponding aldehydes by solvent-free reaction with NH₂OH·HCl and a base (NaOH or Na₂CO₃) using a mechanochemical approach, thus minimizing the possible risk. In all cases, the conversion to oximes was almost complete. The focus of this work is on 1-methoxyindole-3-carboxaldehyde oxime, a key intermediate in the production of indole phytoalexins with useful antimicrobial properties. Under optimized conditions, it was possible to reach almost 95% yield after 20 min of milling. Moreover, for the products containing electron-donating substituents (-CH₃, -OCH₃), the isomerization from the oxime anti to syn isomer under acidic conditions was discovered. For the 1-methoxy analog, the acidic isomerization of pure isomers in solution resulted in the formation of anti isomer, whereas the prevalence of syn isomer was observed in solid state. From NMR data the syn and anti structures of produced oximes were elucidated. This work shows an interesting and possibly scalable alternative to classical synthesis and underlines environmentally friendly and sustainable character of mechanochemistry.

Alternative Technologies That Facilitate Access to Discrete Metal Complexes

Organometallic complexes: these two words jump to the mind of the chemist and are directly associated with their utility in catalysis or as a pharmaceutical. Nevertheless, to be able to use them, it is necessary to synthesize them, and it is not always a small matter. Typically, synthesis is via solution chemistry, using a round-bottom flask and a magnetic or mechanical stirrer. This review takes stock of alternative technologies currently available in laboratories that facilitate the synthesis of such complexes. We highlight five such technologies: mechanochemistry, also known as solvent-free chemistry, uses a mortar and pestle or a ball mill; microwave activation can drastically reduce reaction times; ultrasonic activation promotes chemical reactions because of cavitation phenomena; photochemistry, which uses light radiation to initiate reactions; and continuous flow chemistry, which is increasingly used to simplify scale-up. While facilitating the synthesis of organometallic compounds, these enabling technologies also allow access to compounds that cannot be obtained in any other way. This shows how the paradigm is changing and evolving toward new technologies, without necessarily abandoning the round-bottom flask. A bright future is ahead of the organometallic chemist, thanks to these novel technologies.

Synthesis of acylglycerol derivatives by mechanochemistry

In recent times, many biologically relevant building blocks such as amino acids, peptides, saccharides, nucleotides and nucleosides, etc. have been prepared by mechanochemical synthesis. However, mechanosynthesis of lipids by ball milling techniques has remained essentially unexplored. In this work, a multistep synthetic route to access mono- and diacylglycerol derivatives by mechanochemistry has been realized, including the synthesis of diacylglycerol-coumarin conjugates.

Straightforward Ball-Milling Access to Dinucleoside 5',5'-Polyphosphates via Phosphorimidazolide Intermediates

A solvent-assisted mechanochemical approach to access symmetrical and mixed dinucleoside 5,5'-polyphosphates is reported. Under ball-milling conditions, nucleoside 5'-monophosphates were quantitatively activated using 1,1'-carbonyldiimidazole, forming their phosphorimidazolide derivatives. The addition of a nucleoside 5'-mono-, di- or triphosphate directly led to the formation of the corresponding dinucleotides. Benefits of the reported one-pot method include the use of unprotected nucleotides in their sodium or acid form, activation by the eco-friendly 1,1'-carbonyldiimidazole, non-dry conditions, short reaction time, high conversion rates, and easy setup and purification. This work offers new perspectives for the synthesis of nucleotide conjugates and analogues, combining the phosphorimidazolide approach and milling conditions.

Synthesis of 3-Hydroxy-4-Substituted Picolinonitriles from 4-Propargylaminoisoxazoles via Stepwise and One-Pot Isoxazolopyridine Formation/N-O Bond Cleavage Sequence

A unique synthetic approach to 3-hydroxy-4-substituted picolinonitriles is achieved via gold(I)-catalyzed cyclization of 4-propargylaminoisoxazoles and subsequent N-O bond cleavage of isoxazolopyridines under mild reaction conditions in a stepwise and one-pot fashion.

Mechanochemistry of nucleosides, nucleotides and related materials

The application of mechanical force to induce the formation and cleavage of covalent bonds is a rapidly developing field within organic chemistry which has particular value in reducing or eliminating solvent usage, enhancing reaction rates and also in enabling the preparation of products which are otherwise inaccessible under solution-phase conditions. Mechanochemistry has also found recent attention in materials chemistry and API formulation during which rearrangement of non-covalent interactions give rise to functional products. However, this has been known to nucleic acids science almost since its inception in the late nineteenth century when Miescher exploited grinding to facilitate disaggregation of DNA from tightly bound proteins through selective denaturation of the latter. Despite the wide application of ball milling to amino acid chemistry, there have been limited reports of mechanochemical transformations involving nucleoside or nucleotide substrates on preparative scales. A survey of these reactions is provided, the majority of which have used a mixer ball mill and display an almost universal requirement for liquid to be present within the grinding vessel. Mechanochemistry of charged nucleotide substrates, in particular, provides considerable benefits both in terms of efficiency (reducing total processing times from weeks to hours) and by minimising exposure to aqueous conditions, access to previously elusive materials. In the absence of large quantities of solvent and heating, side-reactions can be reduced or eliminated. The central contribution of mechanochemistry (and specifically, ball milling) to the isolation of biologically active materials derived from nuclei by grinding will also be outlined. Finally non-covalent associative processes involving nucleic acids and related materials using mechanochemistry will be described: specifically, solid solutions, cocrystals, polymorph transitions, carbon nanotube dissolution and inclusion complex formation.

Solvent-free copper-catalyzed click chemistry for the synthesis of N-heterocyclic hybrids based on quinoline and 1,2,3-triazole

Copper-catalyzed mechanochemical click reactions using Cu(II), Cu(I) and Cu(0) catalysts have been successfully implemented to provide novel 6-phenyl-2-(trifluoromethyl)quinolines with a phenyl-1,2,3-triazole moiety at O-4 of the quinoline core. Milling procedures proved to be significantly more efficient than the corresponding solution reactions, with up to a 15-fold gain in yield. Efficiency of both solution and milling procedures depended on the p-substituent in the azide reactant, resulting in H < Cl < Br < I reactivity bias. Solid-state catalysis using Cu(II) and Cu(I) catalysts entailed the direct involvement of the copper species in the reaction and generation of highly luminescent compounds which hindered in situ monitoring by Raman spectroscopy. However, in situ monitoring of the milling processes was enabled by using Cu(0) catalysts in the form of brass milling media which offered a direct insight into the reaction pathway of mechanochemical CuAAC reactions, indicating that the catalysis is most likely conducted on the surface of milling balls. Electron spin resonance spectroscopy was used to determine the oxidation and spin states of the respective copper catalysts in bulk products obtained by milling procedures.

Peptide synthesis: ball-milling, in solution, or on solid support, what is the best strategy?

While presenting particularly interesting advantages, peptide synthesis by ball-milling was never compared to the two traditional strategies, namely peptide syntheses in solution and on solid support (solid-phase peptide synthesis, SPPS). In this study, the challenging VVIA tetrapeptide was synthesized by ball-milling, in solution, and on solid support. The three strategies were then compared in terms of yield, purity, reaction time and environmental impact. The results obtained enabled to draw some strengths and weaknesses of each strategy, and to foresee what will have to be implemented to build more efficient and sustainable peptide syntheses in the near future.

Highly selective acylation of polyamines and aminoglycosides by 5-acyl-5-phenyl-1,5-dihydro-4H-pyrazol-4-ones

5-Acyl-5-phenyl-1,5-dihydro-4H-pyrazol-4-ones, accessible from arylpropargyl phenyldiazoacetates, are highly selective acyl transfer reagents for di- and polyamines, as well as aminoalcohols and aminothiols. As reagents with a carbon-based leaving group, they have been applied for benzoyl transfer with a broad selection of substrates containing aliphatic amino in combination with other competing nucleophilic functional groups. The substrate scope and levels of selectivity for direct benzoyl transfer exceed those of known benzoylating reagents. With exceptional selectivity for acylation between primary amines bound to primary and secondary carbons, these new reagents have been used in direct site-selective monobenzoylation of aminoglycoside antibiotics.

Unleashing the Potential of 17 O NMR Spectroscopy Using Mechanochemistry

¹⁷ O NMR spectroscopy has been the subject of vivid interest in recent years, because there is increasing evidence that it can provide unique insight into the structure and reactivity of many molecules and materials. However, due to the very poor natural abundance of oxygen-17, ¹⁷ O labeling is generally a prerequisite. This is a real obstacle for most research groups, because of the high costs and/or strong experimental constraints of the most frequently used ¹⁷ O-labeling schemes. Here, we show for the first time that mechanosynthesis offers unique opportunities for enriching in ¹⁷ O a variety of organic and inorganic precursors of synthetic interest. The protocols are fast, user-friendly, and low-cost, which makes them highly attractive for a broad research community, and their suitability for ¹⁷ O solid-state NMR applications is demonstrated.

Nucleophilic displacement reactions of 5'-derivatised nucleosides in a vibration ball mill

Vibration ball-milling in a zirconia-lined vessel afforded clean and quantitative nucleophilic displacement reactions between 4-methoxybenzylthiolate salts and nucleoside 5′-halides or 5′-tosylates in five to 60 minutes. Under these conditions, commonly-encountered nucleoside cyclisation byproducts (especially of purine nucleosides) were not observed. Liquid-assisted grinding of the same 5'-iodide and 5′-tosylate substrates with potassium selenocyanate in the presence of DMF produced the corresponding 5′-selenocyanates in variable yields over the course of between one and eleven hours thereby avoiding the preparation and use of hygroscopic tetrabutylammonium salts.

Mechanochemistry for facilitated access to N,N-diaryl NHC metal complexes

A solvent-free synthesis of NHC–silver, gold, copper and palladium complexes in a ball-mill was achieved.

Poly(N-isopropylacrylamide-co-l-proline)-catalyzed Claisen–Schmidt and Knoevenagel condensations: unexpected enhanced catalytic activity of the polymer catalyst

The heterogeneous catalyst is more active than the homogeneous one! The abnormal phenomenon is probably caused by the polymer, which enriches the reactants around the reaction sites.

Cu(0), O2 and mechanical forces: a saving combination for efficient production of Cu-NHC complexes

Mechanical forces induced by ball-milling agitation enabled the highly efficient and widely applicable synthesis of Cu-carbene complexes from N,N-diaryl-imidazolium salts and metallic copper. The required amount of gaseous dioxygen and insoluble copper could be reduced down to stoichiometric quantities, while reaction rates clearly outperformed those obtained in solution. Utilisation of Cu(0) as the copper source enabled the application of this approach to a wide array of N,N-diaryl-imidazolium salts (Cl^-, BF₄^- and PF₆^-) that transferred their counter anion directly to the organometallic complexes. Cu-NHC complexes could be produced in excellent yields, including utilisation of highly challenging substrates. In addition, five unprecedented organometallic complexes are reported.

Unraveling the synthesis of homoleptic [Ag(N,N-diaryl-NHC)2]Y (Y = BF4, PF6) complexes by ball-milling

A user-friendly and general mechanochemical method was developed to access rarely described NHC (N-heterocyclic carbene) silver(i) complexes featuring N,N-diarylimidazol(idin)ene ligands and non-coordinating tetrafluoroborate or hexafluorophosphate counter anions.

Stainless-Steel Ball-Milling Method for Hydro-/Deutero-genation using H2O/D2O as a Hydrogen/Deuterium Source

A one-pot continuous-flow method for hydrogen (deuterium) generation and subsequent hydrogenation (deuterogenation) was developed using a stainless-steel (SUS304)-mediated ball-milling approach. SUS304, especially zero-valent Cr and Ni as constituents of the SUS304, and mechanochemical processing played crucial roles in the development of the reactions.

Expedient Mechanosynthesis of N,N-Dialkyl Imidazoliums and Silver(I)-Carbene Complexes in a Ball-Mill

The absence of solvent, associated with intensive mechanical agitation, allowed the first mechanosynthesis of high-value silver(I)-carbene complexes and the corresponding N,N-dialkylimidazolium precursors. This procedure gave outstanding results in terms of yield and reaction time, when compared to solution-based conditions previously described in literature, and was generalized to unprecedented compounds. Silver(I)-carbene complexes could either be obtained from N,N-dialkylimidazolium salts or directly from imidazole and alkyl halides in a one-pot two-step procedure without isolating the imidazolium intermediate. Additionally, an efficient one-pot three-step sequence, including imidazole alkylation, silver metalation, and transmetalation is reported.