Access to Base Adducts of Low‐Valent Organotin‐Hydride Compounds by Controlled, Stepwise Hydrogen Abstraction from a Tetravalent Organotin Trihydride

Carbene-activated stannylenes to access selective C(sp3)-H bond scission at the steric limit

The ubiquity of N-heterocyclic carbenes (NHCs) in diverse areas of chemical research typically arises from their potent stabilising capabilities and role as innocent spectators to stabilise otherwise non-bottleable compounds and complexes. This has, until now, been particularly true for NHC-stabilised stannylenes, with no exceptions reported thus far. Herein, we demonstrate that the combination of heteroleptic terphenyl-/amido-based stannylenes and tetra-alkyl substituted NHCs renders the corresponding NHC-ligated stannylenes highly reactive, yet isolable. In solution, this induces sterically controlled inter- and intramolecular C(sp3)-H bond scissions, resulting in the selective formation of stannylene metallocycles that depend on both the NHC source and the meta-terphenyl ligand coordinated to tin.

Characterization of Germanium Nanoparticles from Arylgermanium Trihydrides

Germanium is a promising basis for nanomaterials due to its low toxicity and valuable optical and electronic properties. However, germanium nanomaterials have seen little research compared to other group 14 elements due to unpredictable chemical behavior and high costs. Here, we report the dehydrocoupling of o-tolylgermanium trihydride to amorphous nanoparticles. The reaction is facilitated through reflux at 162 °C and can be accelerated with an amine base catalyst. Through cleavage of both H2 and toluene, new Ge-Ge bonds form. This results in nanoparticles consisting of crosslinked germanium with o-tolyl termination. The particles are 2-6 nm in size and have masses above approximately 3500 Da. The organic substituents are promising for further functionalization. Combined with strong absorption up to 600 nm and moderate solubility and air stability, there are numerous possibilities for future applications.

Activation of Ge-H and Sn-H Bonds with N-Heterocyclic Carbenes and a Cyclic (Alkyl)(amino)carbene

A study of the reactivity of several N-heterocyclic carbenes (NHCs) and the cyclic (alkyl)(amino)carbene 1-(2,6-di-iso-propylphenyl)-3,3,5,5-tetramethyl-pyrrolidin-2-ylidene (cAACMe ) with the group 14 hydrides GeH2 Mes2 and SnH2 Me2 (Me=CH3 , Mes=1,3,5-(CH3 )3 C6 H2 ) is presented. The reaction of GeH2 Mes2 with cAACMe led to the insertion of cAACMe into one Ge-H bond to give cAACMe H-GeHMes2 (1). If 1,3,4,5-tetramethyl-imidazolin-2-ylidene (Me2 ImMe ) was used as the carbene, NHC-mediated dehydrogenative coupling occurred, which led to the NHC-stabilized germylene Me2 ImMe ⋅GeMes2 (2). The reaction of SnH2 Me2 with cAACMe also afforded the insertion product cAACMe H-SnHMe2 (3), and reaction of two equivalents Me2 ImMe with SnH2 Me2 gave the NHC-stabilized stannylene Me2 ImMe ⋅SnMe2 (4). If the sterically more demanding NHCs Me2 ImMe , 1,3-di-isopropyl-4,5-dimethyl-imidazolin-2-ylidene (iPr2 ImMe ) and 1,3-bis-(2,6-di-isopropylphenyl)-imidazolin-2-ylidene (Dipp2 Im) were employed, selective formation of cyclic oligomers (SnMe2 )n (5; n=5-8) in high yield was observed. These cyclic oligomers were also obtained from the controlled decomposition of cAACMe H-SnHMe2 (3).

Molecular Ln(III)-H-E(II) Linkages (Ln=Y, Lu; E=Ge, Sn, Pb)

Following the alkane-elimination route, the reaction between tetravalent aryl tintrihydride Ar*SnH3 and trivalent rare-earth-metallocene alkyls [Cp*2 Ln(CH{SiMe3 }2 )] gave complexes [Cp*2 Ln(μ-H)2 SnAr*] implementing a low-valent tin hydride (Ln=Y, Lu; Ar*=2,6-Trip2 C6 H3 , Trip=2,4,6-triisopropylphenyl). The homologous complexes of germanium and lead, [Cp*2 Ln(μ-H)2 EAr*] (E = Ge, Pb), were accessed via addition of low-valent [(Ar*EH)2 ] to the rare-earth-metal hydrides [(Cp*2 LnH)2 ]. The lead compounds [Cp*2 Ln(μ-H)2 PbAr*] exhibit H/D exchange in reactions with deuterated solvents or dihydrogen.

Reactivity of organogermanium and organotin trihydrides

The organogermanium and organotin trihydrides (TbbEH₃) [E = Ge (3), Sn (7)] with the Tbb substituent were synthesized by hydride substitution (Tbb = 2,6-[CH(SiMe₃)₂]₂-4-(t-Bu)C₆H₂). Deprotonation of the organoelement trihydrides 3 and 7 was studied in reaction with bases MeLi, BnK and LDA (Bn = benzyl, LDA = lithium diisopropylamide) to yield the deprotonation products (8-11) as lithium or potassium salts. Hydride abstraction from TbbSnH₃ using the trityl salt [Ph₃C][Al(OC{CF₃}₃)₄] gives the salt [TbbSnH₂][Al(OC{CF₃}₃)₄] (12) which was stabilized by thf donor ligands [TbbSnH₂(thf)₂][Al(OC{CF₃}₃)₄] (13). Tintrihydride 7 reacts with trialkylamine Et₂MeN to give as the product of a reductive elimination of hydrogen the distannane (TbbSnH₂)₂ (14). Transfer of hydrogen was observed in reaction of trihydrides TbbEH₃ (E = Ge, Sn) and Ar*GeH₃ with N-heterocyclic carbene (NHC). The NHC adduct TbbSnH(^iPrNHC) (15) was synthesized at rt and the germanium hydrides exhibit hydrogen transfer at higher temperatures to give Ar*GeH(^MeNHC) (16) and TbbGeH(^MeNHC) (17).

Isolable Tin(II) Hydrides Featuring Sterically Undemanding Pincer-Type Ligands and Their Dehydrogenative Sn-Sn Bond Forming Reactions to Distannynes Promoted by Lewis Acidic Tri-sec-butylborane

Unlike isolable tin(II) hydrides supported by bulky ligands reported in the literature, this research describes the synthesis and characterization of thermally stable tin(II) hydrides L^PhSnH (1-H) and ^MeLSnH (2-H) stabilized by sterically undemanding N,N,N-coordinating pincer-type ligands (L^Ph = 2,5-dipyridyl-3,4-diphenylpyrrolato; ^MeL = 2,5-bis(6-methylpyridyl)pyrrolato). The results from previous reports reveal that attempts to access tin(II) hydrides containing less-bulky ligands have had limited success, and decomposition to tin(I) distannynes often occurs. The key to the successful isolation of 1-H and 2-H is the identification of the role of Lewis acidic B^sBu₃, generated upon delivering hydride from commonly used hydride reagents M[B^sBu₃H] ("selectrides", M = Li or K). This study details compelling experimental evidence and theoretical results of the role played by B^sBu₃, which catalyzes the dehydrocoupling reactions of 1-H and 2-H to yield tin(I) distannynes L^PhSn-SnL^Ph (1₂) and ^MeLSn-Sn^MeL (2₂) with the liberation of H₂. To avoid the interference of B^sBu₃, 1-H and 2-H can be isolated in pure forms using pinacolborane as the hydride donor with L^PhSnOMe (1-OMe) and ^MeLSnOMe (2-OMe) as reactants, respectively. DFT calculations and experimental observations indicate that the coordination of the Sn-H bond of 1-H to B^sBu₃ leaves an electrophilic tin center, rendering the nucleophilic attack by the second equivalent of 1-H forming a Sn-Sn bond.

Controlling Oxidative Addition and Reductive Elimination at Tin(I) via Hemi-Lability

We report on the synthesis of a distannyne supported by a pincer ligand bearing pendant amine donors that is capable of reversibly activating E-H bonds at one or both of the tin centres through dissociation of the hemi-labile N-Sn donor/acceptor interactions. This chemistry can be exploited to sequentially (and reversibly) assemble mixed-valence chains of tin atoms of the type ArSn{Sn(Ar)H}_n SnAr (n=1, 2). The experimentally observed (decreasing) propensity towards chain growth with increasing chain length can be rationalized both thermodynamically and kinetically by the electron- withdrawing properties of the -Sn(Ar)H- backbone units generated via oxidative addition.

Molecular Main Group Metal Hydrides

This review serves to document advances in the synthesis, versatile bonding, and reactivity of molecular main group metal hydrides within Groups 1, 2, and 12-16. Particular attention will be given to the emerging use of said hydrides in the rapidly expanding field of Main Group element-mediated catalysis. While this review is comprehensive in nature, focus will be given to research appearing in the open literature since 2001.

Hydrostannylation of carbon dioxide by a hydridostannylene molybdenum complex

Reaction of the aryltin(II) hydrides {Ar^iPr₄Sn(μ-H)}₂ or {Ar^iPr₆Sn(μ-H)}₂ (Ar^iPr₄ = -C₆H₃-2,6-(C₆H₃-2,6-ⁱPr₂)₂, Ar^iPr₆ = -C₆H₃-2,6-(C₆H₂-2,4,6-ⁱPr₃)₂) with two equivalents of the molybdenum carbonyl [Mo(CO)₅(THF)] afforded the divalent tin hydride transition metal complexes, Mo(CO)₅{Sn(Ar^iPr₆)H}, (1), or Mo(CO)₅{Sn(Ar^iPr₄)(THF)H} (2), respectively. Complex 1 effects the facile hydrostannylation of carbon dioxide, to yield Mo(CO)₅{Sn(Ar^iPr₆)(κ²-O,O'-O₂CH)}, (3), which features a bidentate formate ligand coordinating the tin atom. Reaction of 3 with the pinacolborane, HBpin (pin = pinacolato) in benzene regenerated 1 in quantitative yield. All complexes were characterized by X-ray crystallography, as well as UV-visible, IR, and multinuclear NMR spectroscopies. The isolation of 1 and 2 is consistent with the existence of monomeric forms of {Ar^iPr₄Sn(μ-H)}₂ and {Ar^iPr₆Sn(μ-H)}₂ in solution. Regeneration of 1 from 3via reaction with pinacolborane as the hydrogen source shows the catalytic potential of 1 in the hydrogenation of CO₂.

Tetryl-Tetrylene Addition to Phenylacetylene

Phenylacetylene adds [Ar*GeH2 -SnAr'], [Ar*GeH2 -PbAr'] and [Ar'SnH2 -PbAr*] at rt in a regioselective and stereoselective reaction. The highest reactivity was found for the stannylene, which reacts immediately upon addition of one equivalent of alkyne. However, the plumbylenes exhibit addition to the alkyne only in reaction with an excess of phenylacetylene. The product of the germylplumbylene addition reacts with a second equivalent of alkyne and the product of a CH-activation, a dimeric lead acetylide, were isolated. In the case of the stannylplumbylene the trans-addition product was characterized as the kinetically controlled product which isomerizes at rt to yield the cis-addition product, which is stabilized by an intramolecular Sn-H-Pb interaction. NMR chemical shifts of the olefins were investigated using two- and four-component relativistic DFT calculations, as spin-orbit effects can be large. Hydride abstraction was carried out by treating [Ar'SnPhC=CHGeH2 Ar*] with the trityl salt [Ph3 C][Al(OC{CF3 })4 ] to yield a four membered ring cation.

Synthesis and Hydrogenation of Heavy Homologues of Rhodium Carbynes: [(Me3 P)2 (Ph3 P)Rh≡E-Ar*] (E=Sn, Pb)

Tetrylidynes [(Me3 P)2 (Ph3 P)Rh≡SnAr*] (10) and [(Me3 P)2 (Ph3 P)Rh≡PbAr*] (11) are accessed for the first time via dehydrogenation of dihydrides [(Ph3 P)2 RhH2 SnAr*] (3) and [(Ph3 P)2 RhH2 PbAr*] (7) (Ar*=2,6-Trip2 C6 H3 , Trip=2,4,6-triisopropylphenyl), respectively. Tin dihydride 3 was either synthesized in reaction of the dihydridostannate [Ar*SnH2 ]- with [(Ph3 P)3 RhCl] or via reaction between hydrides [(Ph3 P)3 RhH] and 1 / 2  [(Ar*SnH)2 ]. Homologous lead hydride [(Ph3 P)2 RhH2 PbAr*] (7) was synthesized analogously from [(Ph3 P)3 RhH] and 1 / 2  [(Ar*PbH)2 ]. Abstraction of hydrogen from 3 and 7 supported by styrene and trimethylphosphine addition yields tetrylidynes 10 and 11. Stannylidyne 10 was also characterized by 119 Sn Mössbauer spectroscopy. Hydrogenation of the triple bonds at room temperature with excess H2 gives the cis-dihydride [(Me3 P)2 (Ph3 P)RhH2 PbAr*] (12) and the tetrahydride [(Me3 P)2 (Ph3 P)RhH2 SnH2 Ar*] (14). Complex 14 eliminates spontaneously one equivalent of hydrogen at room temperature to give the dihydride [(Me3 P)2 (Ph3 P)RhH2 SnAr*] (13). Hydrogen addition and elimination at stannylene tin between complexes 13 and 14 is a reversible reaction at room temperature.

Reductive dehydrocoupling of diphenyltin dihydride with LiAlH4: selective synthesis and structures of the first bicyclo[2.2.1]heptastannane-1,4-diide and bicyclo[2.2.2]octastannane-1,4-diide

The reaction of diphenyltin dihydride with LiAlH4 gives access to a set of charged tin cages as their lithium salts. Variation in the ratio of reactants provides a perstannabicyclooctane dianion and a perstannanorbornane as the di- and monoanions. These compounds can be synthesised selectively by careful stoichiometric control and have been characterised by single crystal X-ray diffractometry, NMR and UV-vis spectroscopy. Computational exploration of the electronic structures of these compounds was undertaken and, in agreement with structural and spectroscopic features, indicated significant σ-delocalisation in the tin skeletons.

Hydridoorganostannylene Coordination: Group 4 Metallocene Dichloride Reduction in Reaction with Organodihydridostannate Anions

Organodihydridoelement anions of germanium and tin were reacted with metallocene dichlorides of Group 4 metals Ti, Zr and Hf. The germate anion [Ar*GeH2 ]- reacts with hafnocene dichloride under formation of the substitution product [Cp2 Hf(GeH2 Ar*)2 ]. Reaction of the organodihydridostannate with metallocene dichlorides affords the reduction products [Cp2 M(SnHAr*)2 ] (M=Ti, Zr, Hf). Abstraction of a hydride substituent from the titanium bis(hydridoorganostannylene) complex results in formation of cation [Cp2 M(SnAr*)(SnHAr*)]+ exhibiting a short Ti-Sn interaction. (Ar*=2,6-Trip2 C6 H3 , Trip=2,4,6-triisopropylphenyl).

Deprotonation of Organogermanium and Organotin Trihydrides

Terphenyltin and terphenylgermanium trihydrides were deprotonated in reaction with strong bases, such as LiMe, LDA, or KBn. In the solid state, the Li salts of the germate anion 4 and 4a exhibit a Li-Ge contact. In the Li salt of the dihydridostannate anion 6a, the Li cation is not coordinated at the tin atom instead an interaction of the Li cation with the hydride substituents was found. Evidenced by ¹H-⁷Li-HOESY NMR spectroscopy the Li-salt of the deprotonated tin hydride 6a exhibits in toluene solution a contact between Li cation and hydride substituents, whereas in the ¹H-⁷Li-HOESY NMR spectrum of the homologous germate salt 4a, no crosspeak between hydride and Li signals was found. The organodihydridogermate and -stannate react as nucleophiles with low-valent Group 14 electrophiles. Thus, three compounds were synthesized: Ar-Ë'-EH₂-Ar (E', E = Sn, Ge; Pb, Ge; Pb, Sn; Ar = Ar', Ar*). Following an alternative synthesis Ar'SnH₂PbAr* was synthesized in reaction between [(Ar*PbH)₂] and [(Ar'SnH)₄] generated in situ. In reaction between low-valent organotin hydride [(Ar*SnH)₂] and organdihydridostannate [Ar*SnH₂]^- formation of distannate [Ar*₂Sn₂H₃]^- was found.

N-Heterocyclic Carbene Adducts of Main Group Elements and Their Use as Ligands in Transition Metal Chemistry

N-Heterocyclic carbenes (NHC) are nowadays ubiquitous and indispensable in many research fields, and it is not possible to imagine modern transition metal and main group element chemistry without the plethora of available NHCs with tailor-made electronic and steric properties. While their suitability to act as strong ligands toward transition metals has led to numerous applications of NHC complexes in homogeneous catalysis, their strong σ-donating and adaptable π-accepting abilities have also contributed to an impressive vitalization of main group chemistry with the isolation and characterization of NHC adducts of almost any element. Formally, NHC coordination to Lewis acids affords a transfer of nucleophilicity from the carbene carbon atom to the attached exocyclic moiety, and low-valent and low-coordinate adducts of the p-block elements with available lone pairs and/or polarized carbon-element π-bonds are able to act themselves as Lewis basic donor ligands toward transition metals. Accordingly, the availability of a large number of novel NHC adducts has not only produced new varieties of already existing ligand classes but has also allowed establishment of numerous complexes with unusual and often unprecedented element-metal bonds. This review aims at summarizing this development comprehensively and covers the usage of N-heterocyclic carbene adducts of the p-block elements as ligands in transition metal chemistry.

Base-induced reversible H2 addition to a single Sn(ii) centre

A range of amines catalyse the oxidative addition (OA) of H2 to [(Me3Si)2CH]2Sn (1), forming [(Me3Si)2CH]2SnH2 (2). Experimental and computational studies point to 'frustrated Lewis pair' mechanisms in which 1 acts as a Lewis acid and involve unusual late transition states; this is supported by the observation of a kinetic isotope effect for Et3N. When DBU is used the energetics of H2 activation are altered, allowing an equilibrium between 1, 2 and adduct [1·DBU] to be established, thus demonstrating reversible oxidative addition/reductive elimination (RE) of H2 at a single main group centre.

NHCs in Main Group Chemistry

Since the discovery of the first stable N-heterocyclic carbene (NHC) in the beginning of the 1990s, these divalent carbon species have become a common and available class of compounds, which have found numerous applications in academic and industrial research. Their important role as two-electron donor ligands, especially in transition metal chemistry and catalysis, is difficult to overestimate. In the past decade, there has been tremendous research attention given to the chemistry of low-coordinate main group element compounds. Significant progress has been achieved in stabilization and isolation of such species as Lewis acid/base adducts with highly tunable NHC ligands. This has allowed investigation of numerous novel types of compounds with unique electronic structures and opened new opportunities in the rational design of novel organic catalysts and materials. This Review gives a general overview of this research, basic synthetic approaches, key features of NHC-main group element adducts, and might be useful for the broad research community.

Low-valent group 14 element hydride chemistry: towards catalysis

The chemistry of group 14 element(ii) hydride complexes has rapidly expanded since the first stable example of such a compound was reported in 2000. Since that time it has become apparent that these systems display remarkable reactivity patterns, in some cases mimicking those of late transition-metal (TM) hydride compounds. This is especially so for the hydroelementation of unsaturated organic substrates. Recently, this aspect of their reactivity has been extended to the use of group 14 element(ii) hydrides as efficient, "TM-like" catalysts in organic synthesis. This review will detail how the chemistry of these hydride compounds has advanced since their early development. Throughout, there is a focus on the importance of ligand effects in these systems, and how ligand design can greatly modify a coordinated complex's electronic structure, reactivity, and catalytic efficiency.

Reductive Elimination of Hydrogen from Bis(trimethylsilyl)methyltin Trihydride and Mesityltin Trihydride

Alkyltin trihydride [(Me₃ Si)₂ CHSnH₃ ] was synthesized and the reductive elimination of hydrogen from this species was investigated. A methyl-substituted N-heterocyclic carbene reacts with the organotrihydride in dependence on stoichiometry and solvent to give a series of products of the reductive elimination and dehydrogenative tin-tin bond formation. Besides characterization of the carbene adduct of the alkyltin(II) hydride, a Sn₄ chain was also isolated, encompassing two stannyl-stannylene sites, which are stabilized each as NHC-adducts. Complete dehydrogenation resulted to give either a carbene-stabilized distannyne or a metalloid Sn₉ -cluster salt. Reductive elimination of hydrogen was also achieved with an excess of diethylmethylamine to give the alkyltin(II) hydride as a Lewis base free tetramer [(RSnH)₄ ]. The method of cluster formation at low temperatures by hydrogen elimination was also transferred to the mesityl-substituted tin trihydride MesSnH₃ . In this case [(MesSn)₁₀ ], showing a [5]prismane structure, was isolated in good yield and characterized. NMR spectroscopic features of the propellane-type cluster [Trip₆ Sn₆ ] are reported.