Raman-based PAT for VLP precipitation: systematic data diversification and preprocessing pipeline identification

Virus-like particles (VLPs) are a promising class of biopharmaceuticals for vaccines and targeted delivery. Starting from clarified lysate, VLPs are typically captured by selective precipitation. While VLP precipitation is induced by step-wise or continuous precipitant addition, current monitoring approaches do not support the direct product quantification, and analytical methods usually require various, time-consuming processing and sample preparation steps. Here, the application of Raman spectroscopy combined with chemometric methods may allow the simultaneous quantification of the precipitated VLPs and precipitant owing to its demonstrated advantages in analyzing crude, complex mixtures. In this study, we present a Raman spectroscopy-based Process Analytical Technology (PAT) tool developed on batch and fed-batch precipitation experiments of Hepatitis B core Antigen VLPs. We conducted small-scale precipitation experiments providing a diversified data set with varying precipitation dynamics and backgrounds induced by initial dilution or spiking of clarified Escherichia coli-derived lysates. For the Raman spectroscopy data, various preprocessing operations were systematically combined allowing the identification of a preprocessing pipeline, which proved to effectively eliminate initial lysate composition variations as well as most interferences attributed to precipitates and the precipitant present in solution. The calibrated partial least squares models seamlessly predicted the precipitant concentration with R 2 of 0.98 and 0.97 in batch and fed-batch experiments, respectively, and captured the observed precipitation trends with R 2 of 0.74 and 0.64. Although the resolution of fine differences between experiments was limited due to the observed non-linear relationship between spectral data and the VLP concentration, this study provides a foundation for employing Raman spectroscopy as a PAT sensor for monitoring VLP precipitation processes with the potential to extend its applicability to other phase-behavior dependent processes or molecules.

Genetic algorithm-based semisupervised convolutional neural network for real-time monitoring of Escherichia coli fermentation of recombinant protein production using a Raman sensor

As a non-destructive sensing technique, Raman spectroscopy is often combined with regression models for real-time detection of key components in microbial cultivation processes. However, achieving accurate model predictions often requires a large amount of offline measurement data for training, which is both time-consuming and labor-intensive. In order to overcome the limitations of traditional models that rely on large datasets and complex spectral preprocessing, in addition to the difficulty of training models with limited samples, we have explored a genetic algorithm-based semi-supervised convolutional neural network (GA-SCNN). GA-SCNN integrates unsupervised process spectral labeling, feature extraction, regression prediction, and transfer learning. Using only an extremely small number of offline samples of the target protein, this framework can accurately predict protein concentration, which represents a significant challenge for other models. The effectiveness of the framework has been validated in a system of Escherichia coli expressing recombinant ProA5M protein. By utilizing the labeling technique of this framework, the available dataset for glucose, lactate, ammonium ions, and optical density at 600 nm (OD600) has been expanded from 52 samples to 1302 samples. Furthermore, by introducing a small component of offline detection data for recombinant proteins into the OD600 model through transfer learning, a model for target protein detection has been retrained, providing a new direction for the development of associated models. Comparative analysis with traditional algorithms demonstrates that the GA-SCNN framework exhibits good adaptability when there is no complex spectral preprocessing. Cross-validation results confirm the robustness and high accuracy of the framework, with the predicted values of the model highly consistent with the offline measurement results.

An adaptive soft-sensor for advanced real-time monitoring of an antibody-drug conjugation reaction

In the production of antibody-drug conjugates (ADCs), the conjugation reaction is a central step defining the final product composition and, hence, directly affecting product safety and efficacy. To enable real-time monitoring, spectroscopic sensors in combination with multivariate regression models have gained popularity in recent years. The extended Kalman filter (EKF) can be used as so-called soft-sensor to fuse sensor predictions with long-horizon forecasts by process models. This enables the dynamic update of the current state and provides increased robustness against experimental noise or model errors. Due to the uncertainty associated with sensor and process models in biopharmaceutical applications, the deployment of such soft-sensors is challenging. In this study, we demonstrate the combination of an uncertainty-aware sensor model with a kinetic reaction model using an EKF to monitor a site-directed ADC conjugation reaction. As the sensor model, a Gaussian process regression model is presented to realize a time-variant determination of the sensor uncertainty. The EKF fuses the time-discrete predictions of the amount of conjugated drug from the sensor model with the time-continuous predictions from the kinetic model. While the ADC species are not distinguishable by on-line recorded UV/Vis spectra, the developed soft-sensor is able to dynamically update all relevant reaction species. It could be shown that the use of time-variant process and sensor noise computation approaches improved the performance of the EKF and achieved a reduction of the prediction error of up to 23% compared with the kinetic model. The developed framework proved to enhance robustness against noisy sensor measurements or wrong model initialization and was successfully transferred from batch to fed-batch mode. In future, this framework could be implemented for model-based process control and be adopted for other ADC conjugation reaction types.

Development and Validation of an Artificial Neural-Network-Based Optical Density Soft Sensor for a High-Throughput Fermentation System

Optical density (OD) is a critical process parameter during fermentation, this being directly related to cell density, which provides valuable information regarding the state of the process. However, to measure OD, sampling of the fermentation broth is required. This is particularly challenging for high-throughput-microbioreactor (HT-MBR) systems, which require robotic liquid-handling (LiHa) systems for process control tasks, such as pH regulation or carbon feed additions. Bioreactor volume is limited and automated at-line sampling occupies the resources of LiHa systems; this affects their ability to carry out the aforementioned pipetting operations. Minimizing the number of physical OD measurements is therefore of significant interest. However, fewer measurements also result in less process information. This resource conflict has previously represented a challenge. We present an artificial neural-network-based soft sensor developed for the real-time estimation of the OD in an MBR system. This sensor was able to estimate the OD to a high degree of accuracy (>95%), even without informative process variables stemming from, e.g., off-gas analysis only available at larger scales. Furthermore, we investigated and demonstrated scaling of the soft sensor’s generalization capabilities with the data from different antibody fragments expressing Escherichia coli strains. This study contributes to accelerated biopharmaceutical process development.

A hybrid model for multipoint real time potency observation in continuous direct compression manufacturing operations

The ongoing transition from batch to continuous manufacturing offers both challenges and opportunities in the field of oral solid dosage form production. In turn, Process Analytical Technology (PAT) offers a path towards the successful deployment of continuous tablet manufacturing in rotary tablet presses. One promising PAT tool for this endeavour is the NIR-derived potency measurement. However, the high degree of noise in the data may hamper the extraction of useful information. For this reason, this work focused on the implementation of an adaptive Kalman filter algorithm that incorporates and reconciles the potency prediction given by one or more NIR probes with those of a semi-mechanistic compartmental model developed for the application at hand. This approach allowed for more robust concentration estimations. Furthermore, it was observed that potency levels in multiple locations in the studied tablet press (including those in the finished tablets) could be appropriately inferred using a single in-line measurement data stream. This methodology thus opens the door to advanced process control applications.

Predictive Monitoring of Shake Flask Cultures with Online Estimated Growth Models

Simplicity renders shake flasks ideal for strain selection and substrate optimization in biotechnology. Uncertainty during initial experiments may, however, cause adverse growth conditions and mislead conclusions. Using growth models for online predictions of future biomass (BM) and the arrival of critical events like low dissolved oxygen (DO) levels or when to harvest is hence important to optimize protocols. Established knowledge that unfavorable metabolites of growing microorganisms interfere with the substrate suggests that growth dynamics and, as a consequence, the growth model parameters may vary in the course of an experiment. Predictive monitoring of shake flask cultures will therefore benefit from estimating growth model parameters in an online and adaptive manner. This paper evaluates a newly developed particle filter (PF) which is specifically tailored to the requirements of biotechnological shake flask experiments. By combining stationary accuracy with fast adaptation to change the proposed PF estimates time-varying growth model parameters from iteratively measured BM and DO sensor signals in an optimal manner. Such proposition of inferring time varying parameters of Gompertz and Logistic growth models is to our best knowledge novel and here for the first time assessed for predictive monitoring of Escherichia coli (E. coli) shake flask experiments. Assessments that mimic real-time predictions of BM and DO levels under previously untested growth conditions demonstrate the efficacy of the approach. After allowing for an initialization phase where the PF learns appropriate model parameters, we obtain accurate predictions of future BM and DO levels and important temporal characteristics like when to harvest. Statically parameterized growth models that represent the dynamics of a specific setting will in general provide poor characterizations of the dynamics when we change strain or substrate. The proposed approach is thus an important innovation for scientists working on strain characterization and substrate optimization as providing accurate forecasts will improve reproducibility and efficiency in early-stage bioprocess development.

Towards Digitalization in Bio-Manufacturing Operations: A Survey on Application of Big Data and Digital Twin Concepts in Denmark

Digitalization in the form of Big Data and Digital Twin inspired applications are hot topics in today's bio-manufacturing organizations. As a result, many organizations are diverting resources (personnel and equipment) to these applications. In this manuscript, a targeted survey was conducted amongst individuals from the Danish biotech industry to understand the current state and perceived future obstacles in implementing digitalization concepts in biotech production processes. The survey consisted of 13 questions related to the current level of application of 1) Big Data analytics and 2) Digital Twins, as well as obstacles to expanding these applications. Overall, 33 individuals responded to the survey, a group spanning from bio-chemical to biopharmaceutical production. Over 73% of the respondents indicated that their organization has an enterprise-wide level plan for digitalization, it can be concluded that the digitalization drive in the Danish biotech industry is well underway. However, only 30% of the respondents reported a well-established business case for the digitalization applications in their organization. This is a strong indication that the value proposition for digitalization applications is somewhat ambiguous. Further, it was reported that digital twin applications (58%) were more widely used than Big Data analytic tools (37%). On top of the lack of a business case, organizational readiness was identified as a critical hurdle that needs to be overcome for both Digital Twin and Big Data applications. Infrastructure was another key hurdle for implementation, with only 6% of the respondents stating that their production processes were 100% covered by advanced process analytical technologies.

Bridging Offline Functional Model Carrying Aging-Specific Growth Rate Information and Recombinant Protein Expression: Entropic Extension of Akaike Information Criterion

This study presents a mathematical model of recombinant protein expression, including its development, selection, and fitting results based on seventy fed-batch cultivation experiments from two independent biopharmaceutical sites. To resolve the overfitting feature of the Akaike information criterion, we proposed an entropic extension, which behaves asymptotically like the classical criteria. Estimation of recombinant protein concentration was performed with pseudo-global optimization processes while processing offline recombinant protein concentration samples. We show that functional models including the average age of the cells and the specific growth at induction or the start of product biosynthesis are the best descriptors for datasets. We also proposed introducing a tuning coefficient that would force the modified Akaike information criterion to avoid overfitting when the designer requires fewer model parameters. We expect that a lower number of coefficients would allow the efficient maximization of target microbial products in the upstream section of contract development and manufacturing organization services in the future. Experimental model fitting was accomplished simultaneously for 46 experiments at the first site and 24 fed-batch experiments at the second site. Both locations contained 196 and 131 protein samples, thus giving a total of 327 target product concentration samples derived from the bioreactor medium.

Noninvasive online monitoring of Corynebacterium glutamicum fed-batch bioprocesses subject to spent sulfite liquor raw material uncertainty

In this study the use of a particle filter algorithm to monitor Corynebacterium glutamicum fed-batch bioprocesses with uncertain raw material input composition is shown. The designed monitoring system consists of a dynamic model describing biomass growth on spent sulfite liquor. Based on particle filtering, model simulations are aligned with continuously and noninvasively measured carbon evolution and oxygen uptake rates, giving an estimate of the most probable culture state. Applied on two validation experiments, culture states were accurately estimated during batch and fed-batch operations with root mean square errors below 1.1 g L^-1 for biomass, 0.6 g L^-1 for multiple substrate concentrations and 0.01 g g^-1 h^-1 for biomass specific substrate uptake rates. Additionally, upon fed-batch start uncertain feedstock concentrations were corrected by the estimator without the need of any additional measurements. This provides a solid basis towards a more robust operation of bioprocesses utilizing lignocellulosic side streams.

Non-invasive Raman spectroscopy for time-resolved in-line lipidomics

Oil-producing yeast cells are a valuable alternative source for palm oil production and, hence, may be one important piece of the puzzle for a more sustainable future.

Transforming data to information: A parallel hybrid model for real-time state estimation in lignocellulosic ethanol fermentation

Operating lignocellulosic fermentation processes to produce fuels and chemicals is challenging due to the inherent complexity and variability of the fermentation media. Real‐time monitoring is necessary to compensate for these challenges, but the traditional process monitoring methods fail to deliver actionable information that can be used to implement advanced control strategies. In this study, a hybrid‐modeling approach is presented to monitor cellulose‐to‐ethanol (EtOH) fermentations in real‐time. The hybrid approach uses a continuous‐discrete extended Kalman filter to reconciliate the predictions of a data‐driven model and a kinetic model and to estimate the concentration of glucose (Glu), xylose (Xyl), and EtOH. The data‐driven model is based on partial least squares (PLS) regression and predicts in real‐time the concentration of Glu, Xyl, and EtOH from spectra collected with attenuated total reflectance mid‐infrared spectroscopy. The estimations made by the hybrid approach, the data‐driven models and the internal model were compared in two validation experiments showing that the hybrid model significantly outperformed the PLS and improved the predictions of the internal model. Furthermore, the hybrid model delivered consistent estimates even when disturbances in the measurements occurred, demonstrating the robustness of the method. The consistency of the proposed hybrid model opens the doors towards the implementation of advanced feedback control schemes.

Towards smart biomanufacturing: a perspective on recent developments in industrial measurement and monitoring technologies for bio-based production processes

The biomanufacturing industry has now the opportunity to upgrade its production processes to be in harmony with the latest industrial revolution. Technology creates capabilities that enable smart manufacturing while still complying with unfolding regulations. However, many biomanufacturing companies, especially in the biopharma sector, still have a long way to go to fully benefit from smart manufacturing as they first need to transition their current operations to an information-driven future. One of the most significant obstacles towards the implementation of smart biomanufacturing is the collection of large sets of relevant data. Therefore, in this work, we both summarize the advances that have been made to date with regards to the monitoring and control of bioprocesses, and highlight some of the key technologies that have the potential to contribute to gathering big data. Empowering the current biomanufacturing industry to transition to Industry 4.0 operations allows for improved productivity through information-driven automation, not only by developing infrastructure, but also by introducing more advanced monitoring and control strategies.

Model-Based Methods in the Biopharmaceutical Process Lifecycle

Model-based methods are increasingly used in all areas of biopharmaceutical process technology. They can be applied in the field of experimental design, process characterization, process design, monitoring and control. Benefits of these methods are lower experimental effort, process transparency, clear rationality behind decisions and increased process robustness. The possibility of applying methods adopted from different scientific domains accelerates this trend further. In addition, model-based methods can help to implement regulatory requirements as suggested by recent Quality by Design and validation initiatives. The aim of this review is to give an overview of the state of the art of model-based methods, their applications, further challenges and possible solutions in the biopharmaceutical process life cycle. Today, despite these advantages, the potential of model-based methods is still not fully exhausted in bioprocess technology. This is due to a lack of (i) acceptance of the users, (ii) user-friendly tools provided by existing methods, (iii) implementation in existing process control systems and (iv) clear workflows to set up specific process models. We propose that model-based methods be applied throughout the lifecycle of a biopharmaceutical process, starting with the set-up of a process model, which is used for monitoring and control of process parameters, and ending with continuous and iterative process improvement via data mining techniques.

Spectroscopic sensors for in-line bioprocess monitoring in research and pharmaceutical industrial application

The use of spectroscopic sensors for bioprocess monitoring is a powerful tool within the process analytical technology (PAT) initiative of the US Food and Drug Administration. Spectroscopic sensors enable the simultaneous real-time bioprocess monitoring of various critical process parameters including biological, chemical, and physical variables during the entire biotechnological production process. This potential can be realized through the combination of spectroscopic measurements (UV/Vis spectroscopy, IR spectroscopy, fluorescence spectroscopy, and Raman spectroscopy) with multivariate data analysis to obtain relevant process information out of an enormous amount of data. This review summarizes the newest results from science and industry after the establishment of the PAT initiative and gives a critical overview of the most common in-line spectroscopic techniques. Examples are provided of the wide range of possible applications in upstream processing and downstream processing of spectroscopic sensors for real-time monitoring to optimize productivity and ensure product quality in the pharmaceutical industry.