Laser mass spectrometry with circularly polarized light: circular dichroism of cold molecules in a supersonic gas beam

Anisotropy Factor Spectra for Weakly Allowed Electronic Transitions in Chiral Ketones

Quantum chemical calculations of one-photon absorption, electronic circular dichroism and anisotropy factor spectra for the A-band transition of fenchone, camphor and 3-methylcyclopentanone (3MCP) are reported. While the only weakly allowed nature of the transition leads to comparatively large anisotropies, a proper theoretical description of the absorption for such a transition requires to account for non-Condon effects. We present experimental data for the anisotropy of 3MCP in the liquid phase and show that corresponding Herzberg-Teller corrections are critical to reproduce the main experimental features. The results obtained with our comprehensive theoretical model highlight the importance of the vibrational degree of freedom, paving the way for a deeper understanding of the dynamics in electronic circular dichroism.

Self-referencing circular dichroism ion yield measurements for improved statistics using femtosecond laser pulses

The combination of circular dichroism with laser mass spectrometry via the measurement of ion yields is a powerful tool in chiral recognition, but the measured anisotropies are generally weak. The method presented in this contribution reduces the measurement error significantly. A common path optical setup generates a pair of counter-rotating laser foci in the interaction region of a time-of-flight spectrometer. As the space focus condition is fulfilled for both foci individually, this becomes a twin-peak ion source with well separated and sufficiently resolved mass peaks. The individual control of polarization allows for in situ correction of experimental fluctuations measuring circular dichroism. Our robust optical setup produces reliable and reproducible results and is applicable for dispersion sensitive femtosecond laser pulses. In this contribution, we use 3-methyl-cyclopentanone as a prototype molecule to illustrate the evaluation procedure and the measurement principle.

Enantiospecific Desorption Triggered by Circularly Polarized Light

The interest in enantioseparation and enantiopurification of chiral molecules has been drastically increasing over the past decades, since these are important steps in various disciplines such as pharmaceutical industry, asymmetric catalysis, and chiral sensing. By exposing racemic samples of BINOL (1,1′‐bi‐2‐naphthol) coated onto achiral glass substrates to circularly polarized light, we unambiguously demonstrate that by controlling the handedness of circularly polarized light, preferential desorption of enantiomers can be achieved. There are currently no mechanisms known that would describe this phenomenon. Our observation together with a simplified phenomenological model suggests that the process of laser desorption needs to be further developed and the contribution of quantum mechanical processes should be revisited to account for these data. Asymmetric laser desorption provides us with a contamination‐free technique for the enantioenrichment of chiral compounds.

Spectroscopy for model heterogeneous asymmetric catalysis

Heterogeneous catalysis has vastly benefited from investigations performed on model systems under well-controlled conditions. The application of most of the techniques utilized for such studies is not feasible for asymmetric reactions as enantiomers possess identical physical and chemical properties unless while interacting with polarized light and other chiral entities. A thorough investigation of a heterogeneous asymmetric catalytic process should include probing the catalyst prior to, during, and after the reaction as well as the analysis of reaction products to evaluate the achieved enantiomeric excess. I present recent studies that demonstrate the strength of chiroptical spectroscopic methods to tackle the challenges in investigating model heterogeneous asymmetric catalysis covering all the abovementioned aspects.

Photoionization and photofragmentation in mass spectrometry with visible and UV lasers

Ever since the introduction of laser technology to the field of mass spectrometry, several disciplines evolved providing solutions to challenging scientific and analytical tasks in research and industry. Among these are techniques involving multiphoton ionization such as Resonance-Enhanced Multiphoton Ionization (REMPI, R2PI) and Mass-Analyzed Threshold Ionization (MATI) spectroscopy, a variant of Zero Kinetic Energy (ZEKE) spectroscopy, that possess the ability to selectively ionize certain preselected compounds out of complex mixtures, for example, environmental matrices, with a high level of efficiency. Another key feature of multiphoton ionization techniques is the ability to control the degree of fragmentation, whereas soft ionization is most highly appreciated in most applications. In cases where rich fragmentation patterns are desired for diagnostic purposes, Photodissociation mass spectrometry (PD-MS) is applied successfully. PD-MS allows for the cleavage of selected chemical bonds. With the introduction of chromophoric labels in PD-MS, it became possible to target certain molecules or groups within a molecule. In this review article, an overview of the basic principles and experimental requirements of REMPI and MATI spectroscopy and PD mass spectrometry are given. By means of selected examples, the latest developments and application possibilities in this field over the past decade with special focus on the German research landscape are pointed out. © 2018 Wiley Periodicals, Inc. Mass Spec Rev 38: 202-217, 2019.

Chiroptical inversion for isolated vibronic transitions of supersonic beam-cooled molecules

Circular dichroism-resonance-enhanced multiphoton ionization (CD-REMPI) was used for CD measurements on several single vibronic transitions of supersonic beam-cooled (R)-(+)-1-phenylethanol. Due to the low molecular densities within a supersonic beam and the expected small anisotropy factor of 1-phenylethanol in the permille region, the precision of the experimental method had to be significantly improved. Therefore, a single laser pulse evaluation combined with a twin-peak technique enabled within the used supersonic beam setup is presented. For the electronic transition S₀ → S₁ of (R)-(+)-1-phenylethanol (π → π* transition of the phenyl ring at 266 nm) ten different vibrational modes as well as the 0-transition were investigated with one-color (1 + 1) CD-REMPI. The results deliver new experimental insights on the influence of molecular vibrations on the anisotropy factor. TD-DFT theoretical predictions show how the angle between the electronic and magnetic transition dipole moments of the electronic transition can be modified by different vibrational modes, making even a flip of the sign of the anisotropy factor possible.

Time-Profile Measurement of an Emulsion Using Multiphoton Ionization Time-of-Flight Mass Spectrometry in Combination with a Microscope

Multiphoton ionization time-of-flight mass spectrometry was applied to the measurement of an oil-in-water emulsion that contained toluene as a dispersed phase. Before the measurement, the sample was sufficiently creamed, and then stirred for a short period of time for dispersion. As a result, several intense spikes appeared on the time profile constructed from the peak area for toluene. In the present study, an optical microscope was used to observe the capillary column for sample introduction, and small toluene droplets along with their aggregates were found in the images of the emulsion flowing through the capillary. The aggregates produced intense spikes comprised of multiple plots, which could be easily marked by applying a moving median filter. In the present study, droplets with minimum diameters as small as 2.9 μm, which corresponds to 13 fL, could be calculated as detectable spikes.

Mass-Selected Circular Dichroism of Supersonic-Beam-Cooled [D4 ]-(R)-(+)-3-Methylcyclopentanone

UV spectroscopy and electronic circular dichroism (ECD) experiments on supersonic-beam-cooled deuterated (R)-(+)-3-methylcyclopentanone ([D₄ ]-(R)-(+)-3-MCP) have been performed by using a laser mass spectrometer. The spectral resolution not only allowed excitation and CD measurements for single vibronic transitions but also for the rotational P, Q, and R branches of these transitions. The investigated n→π*18042501 transition showed the largest anisotropy factor ever observed for chiral molecules in the gas phase, which, due to residual saturation of the excited transition, represents only a lower limit for the real anisotropy factor. Furthermore, one-color (1+1+1) and two-color (1+1') resonance-enhanced multiphoton ionization (REMPI) measurements were performed and the effusive-beam (room temperature) and supersonic-beam results for [D₄ ]-(R)-(+)-3-MCP were compared. These results allowed a differentiation between single-step ECD (comparable to conventional ECD) and cumulative ECD (only possible in multiphoton excitation) under supersonic-beam conditions.

Mass-Selective Chiral Analysis

Three ways of realizing mass-selective chiral analysis are reviewed. The first is based on the formation of diastereomers that are of homo- and hetero- type with respect to the enantiomers of involved chiral molecules. This way is quite well-established with numerous applications. The other two ways are more recent developments, both based on circular dichroism (CD). In one, conventional or nonlinear electronic CD is linked to mass spectrometry (MS) by resonance-enhanced multiphoton ionization. The other is based on CD in the angular distribution of photoelectrons, which is measured in combination with MS via photoion photoelectron coincidence. Among the many important applications of mass-selective chiral analysis, this review focuses on its use as an analytical tool for the development of heterogeneous enantioselective chemical catalysis. There exist other approaches to combine chiral analysis and mass-selective detection, such as chiral chromatography MS, which are not discussed here.

Fluorescence-detected circular dichroism spectroscopy of jet-cooled ephedrine

The resonant two-photon ionization circular dichroism (R2PICD) spectrum represents the cumulative circular dichroism (CD) of one-photon excitation and the subsequent one-photon ionization, whereas the fluorescence-detected circular dichroism (FDCD) spectra exhibit only the CD of one-photon excitation, similar to conventional CD spectra. We obtained the FDCD spectra of jet-cooled ephedrine (EPD) near the origin band of the S0-S1 transition to measure the CD of one-photon absorption and thus the CD of the ionization process in R2PI in comparison with the R2PICD spectra. The CD effects of the ionization following excitation of the A (0-0) and C (930 cm(-1)) bands in the spectrum are small, whereas those of the B band (530 cm(-1)) are anomalously large, leading to opposite CD signs for the FDCD and R2PICD spectra. Based on the intermediate state-selective fragmentation patterns in the R2PI spectra, this large CD effect is attributed to the state-selective isomerization that occurs after excitation of the B band. By comparing the experimental and theoretical spectra, we determined that the B band corresponds to an asymmetric ring distortion mode that involves torsional motions of the side chain, which may facilitate the isomerization process. This study demonstrates that FDCD spectroscopy combined with R2PICD spectroscopy provides a powerful tool to measure the CD effects of the excitation and ionization processes separately in R2PI and thus probe the structural changes that occur during the ionization process following excitation to an intermediate state.

Enantiomer-specific analysis of multi-component mixtures by correlated electron imaging-ion mass spectrometry

Simultaneous, enantiomer-specific identification of chiral molecules in multi-component mixtures is extremely challenging. Many established techniques for single-component analysis fail to provide selectivity in multi-component mixtures and lack sensitivity for dilute samples. Here we show how enantiomers may be differentiated by mass-selected photoelectron circular dichroism using an electron-ion coincidence imaging spectrometer. As proof of concept, vapours containing ∼1% of two chiral monoterpene molecules, limonene and camphor, are irradiated by a circularly polarized femtosecond laser, resulting in multiphoton near-threshold ionization with little molecular fragmentation. Large chiral asymmetries (2-4%) are observed in the mass-tagged photoelectron angular distributions. These asymmetries switch sign according to the handedness (R- or S-) of the enantiomer in the mixture and scale with enantiomeric excess of a component. The results demonstrate that mass spectrometric identification of mixtures of chiral molecules and quantitative determination of enantiomeric excess can be achieved in a table-top instrument.

Detection limits of organic compounds achievable with intense, short-pulse lasers

Many organic molecules have strong absorption bands which can be accessed by ultraviolet short pulse lasers to produce efficient ionization. This resonant multiphoton ionization scheme has already been exploited as an ionization source in time-of-flight mass spectrometers used for environmental trace analysis. In the present work we quantify the ultimate potential of this technique by measuring absolute ion yields produced from the interaction of 267 nm femtosecond laser pulses with the organic molecules indole and toluene, and gases Xe, N2 and O2. Using multiphoton ionization cross sections extracted from these results, we show that the laser pulse parameters required for real-time detection of aromatic molecules at concentrations of one part per trillion in air and a limit of detection of a few attomoles are achievable with presently available commercial laser systems. The potential applications for the analysis of human breath, blood and tissue samples are discussed.