In vivo assessment of bladder cancer with diffuse reflectance and fluorescence spectroscopy: A comparative study

OBJECTIVES

The aim of this work is to assess the performance of multimodal spectroscopic approach combined with single core optical fiber for detection of bladder cancer during surgery in vivo.

METHODS

Multimodal approach combines diffuse reflectance spectroscopy (DRS), fluorescence spectroscopy in the visible (405 nm excitation) and near-infrared (NIR) (690 nm excitation) ranges, and high-wavenumber Raman spectroscopy. All four spectroscopic methods were combined in a single setup. For 21 patients with suspected bladder cancer or during control cystoscopy optical spectra of bladder cancer, healthy bladder wall tissue and/or scars were measured. Classification of cancerous and healthy bladder tissue was performed using machine learning methods.

RESULTS

Statistically significant differences in relative total haemoglobin content, oxygenation, scattering, and visible fluorescence intensity were found between tumor and normal tissues. The combination of DRS and visible fluorescence spectroscopy allowed detecting cancerous tissue with sensitivity and specificity of 78% and 91%, respectively. The addition of features extracted from NIR fluorescence and Raman spectra did not improve the quality of classification.

CONCLUSIONS

This study demonstrates that multimodal spectroscopic approach allows increasing sensitivity and specificity of bladder cancer detection in vivo. The developed approach does not require special probes and can be used with single-core optical fibers applied for laser surgery.

Mid-infrared trace detection with parts-per-quadrillion quantitation accuracy: Expanding frontiers of radiocarbon sensing

Detection sensitivity is a critical characteristic to consider during selection of spectroscopic techniques. However, high sensitivity alone is insufficient for spectroscopic measurements in spectrally congested regions. Two-color cavity ringdown spectroscopy (2C-CRDS), based on intra-cavity pump-probe detection, simultaneously achieves high detection sensitivity and selectivity. This combination enables mid-infrared detection of radiocarbon dioxide ([Formula: see text]CO[Formula: see text]) molecules in room-temperature CO[Formula: see text] samples, with 1.4 parts-per-quadrillion (ppq, 10[Formula: see text]) sensitivity (average measurement precision) and 4.6-ppq quantitation accuracy (average calibrated measurement error for 21 samples from four separate trials) demonstrated on samples with [Formula: see text]C/C up to [Formula: see text]1.5[Formula: see text] natural abundance ([Formula: see text]1,800 ppq). These highly reproducible measurements, which are the most sensitive and quantitatively accurate in the mid-infrared, are accomplished despite the presence of orders-of-magnitude stronger, one-photon signals from other CO[Formula: see text] isotopologues. This is a major achievement in laser spectroscopy. A room-temperature-operated, compact, and low-cost 2C-CRDS sensor for [Formula: see text]CO[Formula: see text] benefits a wide range of scientific fields that utilize [Formula: see text]C for dating and isotope tracing, most notably atmospheric [Formula: see text]CO[Formula: see text] monitoring to track CO[Formula: see text] emissions from fossil fuels. The 2C-CRDS technique significantly enhances the general utility of high-resolution mid-infrared detection for analytical measurements and fundamental chemical dynamics studies.

Ferromagnetically coupled chromium(III) dimer shows luminescence and sensitizes photon upconversion

There has been much progress on mononuclear chromium(III) complexes featuring luminescence and photoredox activity, but dinuclear chromium(III) complexes have remained underexplored in these contexts until now. We identified a tridentate chelate ligand able to accommodate both meridional and facial coordination of chromium(III), to either access a mono- or a dinuclear chromium(III) complex depending on reaction conditions. This chelate ligand causes tetragonally distorted primary coordination spheres around chromium(III) in both complexes, entailing comparatively short excited-state lifetimes in the range of 400 to 800 ns in solution at room temperature and making photoluminescence essentially oxygen insensitive. The two chromium(III) ions in the dimer experience ferromagnetic exchange interactions that result in a high spin (S = 3) ground state with a coupling constant of +9.3 cm-1. Photoinduced energy transfer from the luminescent ferromagnetically coupled dimer to an anthracene derivative results in sensitized triplet-triplet annihilation upconversion. Based on these proof-of-principle studies, dinuclear chromium(III) complexes seem attractive for the development of fundamentally new types of photophysics and photochemistry enabled by magnetic exchange interactions.

A Novel LIBS Sensor for Sample Examinations on a Crime Scene

In this work, we present a compact LIBS sensor developed for characterization of samples on a crime scene following requirements of law enforcement agencies involved in the project. The sensor operates both in a tabletop mode, for aside measurements of swabbed materials or taken fragments, and in handheld mode where the sensor head is pointed directly on targets at the scene. The sensor head is connected via an umbilical to an instrument box that could be battery-powered and contains also a color camera for sample visualization, illumination LEDs, and pointing system for placing the target in focus. Here we describe the sensor's architecture and functionalities, the optimization of the acquisition parameters, and the results of some LIBS measurements. On nano-plotted traces at silica wafer and in optimized conditions, for most of the elements the detection limits, in term of the absolute element masses, were found to be below 10 picograms. We also show results obtained on some representative materials, like fingerprints, swabbed soil and gunshot residue, varnishes on metal, and coated plastics. The last, solid samples were used to evaluate the depth profiling capabilities of the instrument, where the recognition of all four car paint layers was achieved.

Singlet Oxygen Quantum Yields of Pyrogenic Dissolved Organic Matter from Lab-Prepared and Wildfire Chars

Wildfires or prescribed fires release pyrogenic dissolved organic matter (pyDOM) into the environment, which can photochemically produce singlet oxygen (1O2) in sun-lit surface waters. 1O2 quantum yields (ΦΔ) are well-studied for non-pyrogenic DOM, but little is understood about the 1O2 generation from pyDOM, especially the ΦΔ values from real wildfire samples and their wavelength dependence. In this study, time-resolved 1O2 phosphorescence was used to determine the wavelength-dependent ΦΔ values for pyDOM generated from wildfire char and a series of lab-prepared chars produced by combusting oak and pine wood. Wildfire and most lab-prepared pyDOM generally had similar ΦΔ values (2.1-2.7%) at 365 nm compared to the reference Suwannee River Natural Organic Matter (SRNOM) isolate (2.4%). Interestingly, pyDOM from the highest combustion temperature char was found to possess extremely low ΦΔ values compared to SRNOM and other pyDOM at all excitation wavelengths. In addition, it was revealed that the predicted steady-state concentration of 1O2 from pyDOM was similar to that from SRNOM, indicating that the addition of pyDOM from wood chars may not strongly impact surface water photochemistry.

Sealing Wax and Bottles in Bags-A Paradigm Shift in Refined Olive Oil Packaging: Preliminary Results

Generally, olive oil possesses natural protection against oxidation due to antioxidant compounds such as phenols and tocopherols. However, in the case of refined olive oil, the refining process unavoidably reduces the presence of these compounds. Considering these considerations, the objective of this study was to address the issues related to the "tightness" of the cap used for packaging oil in SALOV, aiming to extend the product's shelf life. The oil under investigation was packaged in 250 mL transparent glass bottles, each filled with either argon or air. Subsequently, the samples were divided into three groups: one group sealed with a conventional screw cap, another covered with a special protective bag, and a third one sealed with a wax cover directly on the cap. The storage period varied, during which the atmospheric conditions were monitored daily through both destructive and non-destructive analyses. The preliminary results indicate that alternative preservation techniques, such as the use of argon, sealing wax, and protective bags, can effectively enhance the shelf life of the oil and maintain its quality (reduce oxidation, preserve phenolic compounds, and reduce the degradation of pigments). Further research and development in this area could lead to the production of high-quality extra virgin olive oils with extended shelf life and improved sensory and nutritional properties.

Laser Sensing and Chemometric Analysis for Rapid Detection of Oregano Fraud

World health is increasingly threatened by the growing number of spice-related food hazards. Further development of reliable methods for rapid, non-targeted identification of counterfeit ingredients within the supply chain is needed. ENEA has developed a portable, user-friendly photoacoustic laser system for food fraud detection, based on a quantum cascade laser and multivariate calibration. Following a study on the authenticity of saffron, the instrument was challenged with a more elusive adulterant, olive leaves in oregano. The results show that the reported method of laser sensing and chemometric analysis was able to detect adulterants at mass ratios of at least 20% in less than five minutes.

A Portable Laser Spectroscopic System for Measuring Nitrous Oxide Emissions on Fertilized Cropland

Nitrous oxide (laughing gas, N2O) is a relevant greenhouse gas. Agriculture contributes significantly to its emissions. As nitrogen fertilization has been identified as one of the main sources of N2O, controlled application and reduction of the amount of fertilizer adapted to crop demand is essential to reduce N2O emissions. This requires detailed studies of the local distribution of the N2O emission fluxes on different croplands. Consequently, frequent spatially resolved field measurements of N2O concentrations are needed. A precision in the ppb range close to the ambient N2O level of 333 ppb is necessary. Tunable laser absorption spectroscopy using quantum-cascade lasers (QCL) as a light source is an established technique for the measurement of N2O traces. We present the development and validation of a compact portable setup for on-site measurement of N2O emissions from the soil. The setup differs from previous solutions by using an interband cascade laser (ICL), which has significantly lower power consumption compared to a QCL. The portable measurement setup allows N2O emission fluxes to be determined with a precision of 3.5% with a measuring duration of 10 min. The developed system enables the detection of increased N2O emissions because of the fertilization of fields. High N2O emission fluxes are indicators of the overfertilization of the field. Directly after fertilization, N2O fluxes between 2.9 and 5.3 µL m-2 min-1 depending on the gas acquisition site are measured during the field tests. Over time, the fluxes decrease. The obtained results compare well with data from more precise but also more complex and maintenance-intensive instruments for atmospheric research. With this system, the soil moisture as well as the air humidity and air temperature are recorded. Strong influences on N2O fluxes by soil moisture were observed. The presented measurement system is a contribution to the establishment of mobile N2O screening systems that are robust in the field and suitable for comprehensive and routine detection of N2O emissions from soil.

Low-Volume Reaction Monitoring of Carbon Dot Light Absorbers in Optofluidic Microreactors

Optical monitoring and screening of photocatalytic batch reactions using cuvettes ex situ is time-consuming, requires substantial amounts of samples, and does not allow the analysis of species with low extinction coefficients. Hollow-core photonic crystal fibers (HC-PCFs) provide an innovative approach for in situ reaction detection using ultraviolet-visible absorption spectroscopy, with the potential for high-throughput automation using extremely low sample volumes with high sensitivity for monitoring of the analyte. HC-PCFs use interference effects to guide light at the center of a microfluidic channel and use this to enhance detection sensitivity. They open the possibility of comprehensively studying photocatalysts to extract structure-activity relationships, which is unfeasible with similar reaction volume, time, and sensitivity in cuvettes. Here, we demonstrate the use of HC-PCF microreactors for the screening of the electron transfer properties of carbon dots (CDs), a nanometer-sized material that is emerging as a homogeneous light absorber in photocatalysis. The CD-driven photoreduction reaction of viologens (XV²⁺) to the corresponding radical monocation XV^•+ is monitored in situ as a model reaction, using a sample volume of 1 μL per measurement and with a detectability of <1 μM. A range of different reaction conditions have been systematically studied, including different types of CDs (i.e., amorphous, graphitic, and graphitic nitrogen-doped CDs), surface chemistry, viologens, and electron donors. Furthermore, the excitation irradiance was varied to study its effect on the photoreduction rate. The findings are correlated with the electron transfer properties of CDs based on their electronic structure characterized by soft X-ray absorption spectroscopy. Optofluidic microreactors with real-time optical detection provide unique insight into the reaction dynamics of photocatalytic systems and could form the basis of future automated catalyst screening platforms, where samples are only available on small scales or at a high cost.

Metasurface-Enhanced Mid-Infrared Spectrochemical Imaging of Tissues

Label-free and nondestructive mid-infrared vibrational hyperspectral imaging is an essential tissue analysis tool, providing spatially resolved biochemical information critical to understanding physiological and pathological processes. However, the chemically complex and spatially heterogeneous composition of tissue specimens and the inherently weak interaction of infrared light with biomolecules limit the analytical performance of infrared absorption spectroscopy. Here, an advanced mid-infrared spectrochemical tissue imaging modality is introduced using metasurfaces that support strong surface-localized electromagnetic fields to capture quantitative molecular maps of large-area murine brain tissue sections. The approach leverages polarization-multiplexed multi-resonance plasmonic metasurfaces to simultaneously detect various functional biomolecules. The surface-enhanced mid-infrared spectral imaging method eliminates the non-specific effects of bulk tissue morphology on quantitative spectral analysis and improves chemical selectivity. This study shows that metasurface enhancement increases the retrieval of amide I and II bands associated with protein secondary structures. Moreover, it is demonstrated that plasmonic metasurfaces enhance the chemical contrast in infrared images and enable detection of ultrathin tissue regions that are not otherwise visible to conventional mid-infrared spectral imaging. While this work uses murine brain tissue sections, the chemical imaging method is well-suited for other tissue types, which broadens its potential impact for translational research and clinical histopathology.

Extended BODIPYs as Red-NIR Laser Radiation Sources with Emission from 610 nm to 750 nm

Herein, we report the synthetic access to a set of π-extended BODIPYs featuring a penta-arylated (phenyl and/or thiophene) dipyrrin framework. We take advantage of the full chemoselective control of 8-methylthio-2,3,5,6-tetrabromoBODIPY when we conduct the Liebeskind-Srogl cross-coupling (LSCC) to functionalize exclusively the meso-position, followed by the tetra-Suzuki reaction to arylate the halogenated sites. All these laser dyes display absorption and emission bands in the red edge of the visible spectrum reaching the near-infrared with thiophene functionalization. The emission efficiency, both fluorescence and laser, of the polyphenylBODIPYs can be enhanced upon decoration of the peripheral phenyls with electron donor/acceptor groups at para positions. Alternatively, the polythiopheneBODIPYs show an astonishing laser performance despite the charge transfer character of the emitting state. Therefore, these BODIPYs are suitable as a palette of stable and bright laser sources covering the spectral region from 610 nm to 750 nm.

Evaluation of Spatial Gas Temperature and Water Vapor Inhomogeneities in TDLAS in Circular Multipass Absorption Cells Used for the Analysis of Dynamic Tube Flows

The use of optical circular multipass absorption cells (CMPAC) in an open-path configuration enables the sampling free analysis of cylindrical gas flows with high temporal resolution and only minimal disturbances to the sample gas in the pipe. Combined with their robust unibody design, CMPACs are a good option for many applications in atmospheric research and industrial process monitoring. When deployed in an open-path configuration, the effects of inhomogeneities in the gas temperature and composition have to be evaluated to ensure that the resulting measurement error is acceptable for a given application. Such an evaluation needs to consider the deviations caused by spectroscopic effects, e.g., nonlinear effects of temperature variations on the intensity of the spectral line, as well as the interaction of the temperature and concentration field with the characteristic laser beam pattern of the CMPAC. In this work we demonstrate this novel combined evaluation approach for the CMPAC used as part of the tunable diode laser absorption spectroscopy (TDLAS) reference hygrometer in PTB's dynH₂O setup for the characterization of the dynamic response behavior of hygrometers. For this, we measured spatially resolved, 2D temperature and H₂O concentration distributions, and combined them with spatially resolved simulated spectra to evaluate the inhomogeneity effects on the line area of the used H₂O spectral line at 7299.43 cm^-1. Our results indicate that for dynH₂O, the deviations caused by the interaction between large concentration heterogeneities and the characteristic sampling of the beam pattern of the CMPAC are three orders of magnitude larger than deviations caused by small temperature heterogeneity induced spectroscopic effects. We also deduce that the assumption that the "path-integrated" H₂O concentration derived with the open-path CMPAC setup represents an accurate H₂O area average in the flow section covered by the CMPAC in fact shows significant differences of up to 16% and hence does not hold true when large H₂O concentration gradients are present.

Development of a Rapid Measurement Method for Analysis of the NOx Conversion Process Based on Quantum Cascade Laser Absorption Spectroscopy

In this study, a method for double-beam quantum cascade laser absorption spectroscopy (DB-QCLAS) was developed. Two mid-infrared distributed feedback quantum cascade laser beams were coupled in an optical cavity for the monitoring of NO and NO₂ (NO at 5.26 μm; NO₂ at 6.13 μm). Appropriate lines in the absorption spectra were selected, and the influence of common gases in the atmosphere, such as H₂O and CO₂, was avoided. By analyzing the spectral lines under different pressure conditions, the appropriate measurement pressure of 111 mbar was selected. Under this pressure, the interference between adjacent spectral lines could be effectively distinguished. The experimental results show that the standard deviations for NO and NO₂ were 1.57 ppm and 2.67 ppm, respectively. Moreover, in order to improve the feasibility of this technology for detecting chemical reactions between NO and O₂, the standard gases of NO and O₂ were used to fill the cavity. A chemical reaction instantaneously began, and the concentrations of the two gases were immediately changed. Through this experiment, we hope to develop new ideas for the accurate and rapid analysis of the process of NOx conversion and to lay a foundation for a deeper understanding of the chemical changes in atmospheric environments.

Research on Small-Scale Detection Instrument for Drinking Water Combined Laser Spectroscopy and Conductivity Technology

In order to realize rapid and accurate evaluation of drinking water quality, a small-scale water quality detection instrument is designed in this paper that can detect two representative water quality parameters: the permanganate index and total dissolved solids (TDS). The permanganate index measured by the laser spectroscopy method can achieve the approximate value of the organic matter in water, and the TDS measured by the conductivity method can obtain the approximate value of the inorganic matter in water. In addition, to facilitate the popularization of civilian applications, the evaluation method of water quality based on the percent-scores proposed by us is presented in this paper. The water quality results can be displayed on the instrument screen. In the experiment, we measured the water quality parameters of the tap water as well as those after the primary and secondary filtration in Weihai City, Shandong Province, China. The testing results show that the instrument can quickly detect dissolved inorganic and organic matter, and intuitively display the water quality evaluation score on the screen. The instrument designed in this paper has the advantages of high sensitivity, high integration, and small volume, which lays the foundation for the popularity of the detection instrument.

Gas-Phase Characterization of Hypervalent Carbon Compounds Bearing 7-6-7-Ring Skeleton: Penta- versus Tetra-Coordinate Isomers

In this study, we afford explicit characterizations of the electronic and geometrical structures of recently reported hypervalent penta-coordinate carbon compounds by using gas-phase characterization techniques: photodissociation spectroscopy (PDS) and ion mobility-mass spectrometry (IM-MS). In particular for a compound with moderately electron-donating ligands, bearing p-methylthiophenyl substituents, the coexistence of tetra- and penta-coordinate isomers is confirmed, consistent with solution characterizations. It is in sharp contrast to the exclusive tetra-coordinate form (with normal valence of the central carbon atom) in the single crystal. This suggests that a non-polar environment makes the penta-coordinate structure thermodynamically most stable. This delicate difference between the tetra- and penta-coordinate structures, which depends on the environment, is a close reflection of the lower activation barrier of the S_N 2 reaction found in neutral solvent or gas-phase reactions.

Compact laser spectroscopic sensor head prototype for time-resolved breath oxygen monitoring

A small and lightweight optical sensor head prototype with a disposable airway adapter for continuous mainstream monitoring of oxygen at high sampling rate is designed and tested on an optical benchtop. In terms of its size and functionality, the sensor head design is similar to current capnography systems from leading medical equipment manufacturers, and it has been designed within constraints of potential applications in direct breath oxygen monitoring that require direct interaction with the gas inside a breathing tube. The measurement precision of 0.1% O₂with a 10 ms integration time are well within the performance required for breath O₂monitoring applications.

A Computational-Experimental Approach to Unravel the Excited State Landscape in Heavy-Atom Free BODIPY-Related Dyes

We performed a time-gated laser-spectroscopy study in a set of heavy-atom free single BODIPY fluorophores, supported by accurate, excited-state computational simulations of the key low-lying excited states in these chromophores. Despite the strong fluorescence of these emitters, we observed a significant fraction of time-delayed (microseconds scale) emission associated with processes that involved passage through the triplet manifold. The accuracy of the predictions of the energy arrangement and electronic nature of the low-lying singlet and triplet excited states meant that an unambiguous assignment of the main deactivation pathways, including thermally activated delayed fluorescence and/or room temperature phosphorescence, was possible. The observation of triplet state formation indicates a breakthrough in the "classic" interpretation of the photophysical properties of the renowned BODIPY and its derivatives.

Rapid Quantitative Analysis of IR Absorption Spectra for Trace Gas Detection by Artificial Neural Networks Trained with Synthetic Data

Infrared absorption spectroscopy is a widely used tool to quantify and monitor compositions of gases. The concentration information is often retrieved by fitting absorption profiles to the acquired spectra, utilizing spectroscopic databases. In complex gas matrices an expanded parameter space leads to long computation times of the fitting routines due to the increased number of spectral features that need to be computed for each iteration during the fit. This hinders the capability of real-time analysis of the gas matrix. Here, an artificial neural network (ANN) is employed for rapid prediction of gas concentrations in complex infrared absorption spectra composed of mixtures of CO and N₂O. Experimental data is acquired with a mid-infrared dual frequency comb spectrometer. To circumvent the experimental collection of huge amounts of training data, the network is trained on synthetically generated spectra. The spectra are based on simulated absorption profiles making use of the HITRAN database. In addition, the spectrometer’s influence on the measured spectra is characterized and included in the synthetic training data generation. The ANN was tested on measured spectra and compared to a non-linear least squares fitting algorithm. An average evaluation time of 303 µs for a single measured spectrum was achieved. Coefficients of determination were 0.99997 for the predictions of N₂O concentrations and 0.99987 for the predictions of CO concentrations, with uncertainties on the predicted concentrations between 0.04 and 0.18 ppm for 0 to 100 ppm N₂O and between 0.05 and 0.18 ppm for 0 to 60 ppm CO.

Quasi-Type II Core-Shell Perovskite Nanocrystals for Improved Structural Stability and Optical Gain

In recent years, core-shell lead halide perovskite nanocrystals (PeNCs) and their devices have attracted intensive attention owing to nearly perfect optoelectronic properties. However, the complex photophysical mechanism among them is still unclear. Herein, monodispersed core-shell PeNCs coated with an all-inorganic cesium lead bromide (CsPbBr₃) shell epitaxially grown on the surface of formamidinium lead bromide (FAPbBr₃) PeNCs were synthesized. Through power- and temperature-dependent photoluminescence (PL) measurements, it is found that the electronic structure of the core-shell FAPbBr₃/CsPbBr₃ PeNCs has a quasi-type II band alignment. The presence of Cs⁺ in the shell limits ion migration and helps to stabilize structural and optical properties. On this basis, after being exposed to pulsed nanosecond laser for a period, an amplified spontaneous emission (ASE) can be observed, which is attributed to the effective passivation induced by laser irradiation on defects at the interface. The ASE threshold of the core-shell PeNCs showing high structural and optical stability is 447 nJ/cm² under pulsed nanosecond optical pumping. The results that are demonstrated here provide a new idea and perspective for improving the stability of perovskite and can be of practical interest for the utilization of the core-shell PeNCs in optoelectronic devices.

Exploring the Influence of Intermolecular Interactions in Prebiotic Chemistry Using Laser Spectroscopy and Calculations

One of the most fascinating questions in chemistry is why nature chose CGAT as the alphabet of life. Very likely, such selection was the result of multiple factors and a long period of refinement. Here, we explore how the intermolecular interactions influenced such process, by characterizing the formation of dimers between adenine, theobromine and 4-aminopyrimidine. Using a combination of mass-resolved excitation spectroscopy and DFT calculations, we determined the structure of adenine-theobromine and 4-aminopyrimidine-theobromine dimers. The binding energy of these dimers is very close to the canonical adenine-thymine nucleobases. Likewise, the dimers are able to adopt Watson-Crick conformations. These findings seem to indicate that there were many options available to build the first versions of the informational polymers, which also had to compete with other molecules, such as 4-aminopyrimidine, which does not have a valid attaching point for a saccharide. For some reason, nature did not select the most strongly-bonded partners or if it did, such proto-bases were later replaced by the nowadays canonical CGAT.

Study of a Mode Separation Due to Polarization Existing in a Cavity-Enhanced Absorption Spectroscopy

A special phenomenon of resonance mode separation is observed during the study of a high sensitivity folded-cavity enhanced absorption spectroscopy for the measurement of trace gases. The phenomenon affects the measurement of gas absorption spectrum in the cavity. This resonant mode separation phenomenon of the resonant cavity is different from the resonant modes previously observed in linear-cavity enhanced absorption spectroscopy systems. To explore the mechanism of this phenomenon, a series of hypotheses are proposed. The most likely reason among these hypotheses is based on the different reflectance properties of the plane mirror at the fold of the cavity for S-polarized light and P-polarized light. Based on the matrix calculation method, the different reflectance and phase shift of the plane mirror for S-polarized light and P-polarized light are analyzed theoretically, and the results are in better agreement with the phenomena observed in the experiment. Finally, in order to eliminate the resonant mode separation phenomenon, line polarizers were added. By improving the system, the cavity enhanced absorption spectrum of residual water vapor in the cavity was successfully measured, and a minimum detectable absorption coefficient of α_min = 7.6 × 10⁻⁹ cm⁻¹ can be obtained in a single laser scan of 10 s.

Photodegradation of Riboflavin under Alkaline Conditions: What Can Gas-Phase Photolysis Tell Us about What Happens in Solution?

The application of electrospray ionisation mass spectrometry (ESI-MS) as a direct method for detecting reactive intermediates is a technique of developing importance in the routine monitoring of solution-phase reaction pathways. Here, we utilise a novel on-line photolysis ESI-MS approach to detect the photoproducts of riboflavin in aqueous solution under mildly alkaline conditions. Riboflavin is a constituent of many food products, so its breakdown processes are of wide interest. Our on-line photolysis setup allows for solution-phase photolysis to occur within a syringe using UVA LEDs, immediately prior to being introduced into the mass spectrometer via ESI. Gas-phase photofragmentation studies via laser-interfaced mass spectrometry of deprotonated riboflavin, [RF - H]-, the dominant solution-phase species under the conditions of our study, are presented alongside the solution-phase photolysis. The results obtained illustrate the extent to which gas-phase photolysis methods can inform our understanding of the corresponding solution-phase photochemistry. We determine that the solution-phase photofragmentation observed for [RF - H]- closely mirrors the gas-phase photochemistry, with the dominant m/z 241 condensed-phase photoproduct also being observed in gas-phase photodissociation. Further gas-phase photoproducts are observed at m/z 255, 212, and 145. The value of exploring both the gas- and solution-phase photochemistry to characterise photochemical reactions is discussed.

The Quest to Simulate Excited-State Dynamics of Transition Metal Complexes

This Perspective describes current computational efforts in the field of simulating photodynamics of transition metal complexes. We present the typical workflows and feature the strengths and limitations of the different contemporary approaches. From electronic structure methods suitable to describe transition metal complexes to approaches able to simulate their nuclear dynamics under the effect of light, we give particular attention to build a bridge between theory and experiment by critically discussing the different models commonly adopted in the interpretation of spectroscopic experiments and the simulation of particular observables. Thereby, we review all the studies of excited-state dynamics on transition metal complexes, both in gas phase and in solution from reduced to full dimensionality.

A Review of Antiresonant Hollow-Core Fiber-Assisted Spectroscopy of Gases

Antiresonant Hollow-Core Fibers (ARHCFs), thanks to the excellent capability of guiding light in an air core with low loss over a very broad spectral range, have attracted significant attention of researchers worldwide who especially focus their work on laser-based spectroscopy of gaseous substances. It was shown that the ARHCFs can be used as low-volume, non-complex, and versatile gas absorption cells forming the sensing path length in the sensor, thus serving as a promising alternative to commonly used bulk optics-based configurations. The ARHCF-aided sensors proved to deliver high sensitivity and long-term stability, which justifies their suitability for this particular application. In this review, the recent progress in laser-based gas sensors aided with ARHCFs combined with various laser-based spectroscopy techniques is discussed and summarized.

Investigation and Optimization of a Line-Locked Quartz Enhanced Spectrophone for Rapid Carbon Dioxide Measurement

We have developed a rapid quartz enhanced spectrophone for carbon dioxide (CO2) measurement, in which the laser wavelength was tightly locked to a CO2 absorption line and a custom quartz tuning fork (QTF) operating at 12.5 kHz was employed. The intrinsic QTF oscillation-limited response time, as well as the optimal feedback interval, was experimentally investigated. By tightly locking the laser to the R(16) transition of CO2, we obtained a stable laser operation with its center wavelength variation kept within 0.0002 cm-1, merely three times the laser linewidth. The reported CO2 sensor achieved a detection limit of 7 ppm, corresponding to a normalized noise equivalent absorption coefficient (NNEA) of 4.7 × 10-9 W·cm-1·Hz-1/2, at a response time of 0.5 s. The detection limit can be further improved to 0.45 ppm at an integration time of 270 s, illustrating a good system stability. This spectrophone enables the realization of compact and fast-response gas sensors for many scenarios, where CO2 concentration from sub-ppm to hundreds of thousands of ppm is expected.

Gas Monitoring in Human Frontal Sinuses-Stability Considerations and Gas Exchange Studies

Acute rhinosinusitis is a common infectious disease, which, in more than 90% of cases, is caused by viruses rather than by bacteria. Even so, antibiotics are often unnecessarily prescribed, and in the long run this contributes to the alarming level of antibiotics resistance. The reason is that there are no good guiding tools for defining the background reason of the infection. One main factor for the clearance of the infection is if there is non-obstructed ventilation from the sinus to the nasal cavity. Gas in Scattering Media Absorption Spectroscopy (GASMAS) has potential for diagnosing this. We have performed a study of frontal sinuses of volunteers with a focus on signal stability and reproducibility over time, accurate oxygen concentration determination, and assessment of gas transport through passages, naturally and after decongestant spray administration. Different from earlier studies on frontal sinuses, water vapor, serving the purpose of oxygen signal normalization, was measured at 818 nm rather than earlier at 937 nm, now closer to the 760 nm oxygen absorption band and thus resulting in more reliable results. In addition, the action of decongestants was objectively demonstrated for the first time. Evaluated oxygen concentration values for left- and right-hand side sinus cavities were found to agree within 0.3%, and a left-right geometrical asymmetry parameter related to anatomical differences was stable within 10%.

Photoacoustic Laser System for Food Fraud Detection

Economically motivated adulterations of food, in general, and spices, in particular, are an emerging threat to world health. Reliable techniques for the rapid screening of counterfeited ingredients in the supply chain need further development. Building on the experience gained with CO₂ lasers, the Diagnostic and Metrology Laboratory of ENEA realized a compact and user-friendly photoacoustic laser system for food fraud detection, based on a quantum cascade laser. The sensor has been challenged with saffron adulteration. Multivariate data analysis tools indicated that the photoacoustic laser system was able to detect adulterants at mass ratios of 2% in less than two minutes.

Optical-Trapping Laser Techniques for Characterizing Airborne Aerosol Particles and Its Application in Chemical Aerosol Study

We present a broad assessment on the studies of optically-trapped single airborne aerosol particles, particularly chemical aerosol particles, using laser technologies. To date, extensive works have been conducted on ensembles of aerosols as well as on their analogous bulk samples, and a decent general description of airborne particles has been drawn and accepted. However, substantial discrepancies between observed and expected aerosols behavior have been reported. To fill this gap, single-particle investigation has proved to be a unique intersection leading to a clear representation of microproperties and size-dependent comportment affecting the overall aerosol behavior, under various environmental conditions. In order to achieve this objective, optical-trapping technologies allow holding and manipulating a single aerosol particle, while offering significant advantages such as contactless handling, free from sample collection and preparation, prevention of contamination, versatility to any type of aerosol, and flexibility to accommodation of various analytical systems. We review spectroscopic methods that are based on the light-particle interaction, including elastic light scattering, light absorption (cavity ring-down and photoacoustic spectroscopies), inelastic light scattering and emission (Raman, laser-induced breakdown, and laser-induced fluorescence spectroscopies), and digital holography. Laser technologies offer several benefits such as high speed, high selectivity, high accuracy, and the ability to perform in real-time, in situ. This review, in particular, discusses each method, highlights the advantages and limitations, early breakthroughs, and recent progresses that have contributed to a better understanding of single particles and particle ensembles in general.

From Fano to Quasi-BIC Resonances in Individual Dielectric Nanoantennas

Sharp optical resonances in high-index dielectric nanostructures have recently attracted significant attention for their promising applications in nanophotonics. Fano resonances, as well as resonances associated with bound states in the continuum (BIC), have independently shown a great potential for applications in nanoscale lasers, sensors, and nonlinear optical devices. Here, we demonstrate experimentally a close connection between Fano and quasi-BIC resonances excited in individual dielectric nanoantennas. We analyze systematically the resonant response of AlGaAs nanoantennas pumped with a structured light in the near-infrared range. We trace a variation of the scattering spectrum that fully agrees with an analytical expression governed by a Fano parameter and observe directly a transition to a quasi-BIC resonance. Our results suggest a unified approach toward the analysis of sharp resonances in subwavelength nanostructures originating from strong coupling of optical modes that can provide high energy localization for enhanced light-matter interactions.

C-H Activation by an Iron-Nitrido Bis-Pocket Porphyrin Species

High-valent iron-nitrido species are nitrogen analogues of iron-oxo species which are versatile reagents for C-H oxidation. Nonetheless, C-H activation by iron-nitrido species has been scarcely explored, as this is often hampered by their instability and short lifetime in solutions. Herein, the hydrogen atom transfer (HAT) reactivity of an Fe porphyrin nitrido species (2 c) toward C-H substrates was studied in solutions at room temperature, which was achieved by nanosecond laser flash photolysis (LFP) of its Fe^III -azido precursor (1 c) supported by a bulky bis-pocket porphyrin ligand. C-H bonds with bond dissociation enthalpies (BDEs) of up to ≈84 kcal mol^-1 could be activated, and the second-order rate constants (k₂ ) are on the order of 10² -10⁴  s^-1  m^-1 . The Fe-amido product formed after HAT could further release ammonia upon protonation.

Monitoring of endogenous nitric oxide exhaled by pig lungs during ex-vivo lung perfusion

In the context of organ shortage for transplantation, new criteria for better organ evaluation should be investigated. Ex-Vivo Lung Perfusion (EVLP) allows extra-corporal lung re-conditioning and evaluation, under controlled parameters of the organ reperfusion and mechanical ventilation. This work reports on the interest of exhaled gas analysis during the EVLP procedure. After a one-hour cold ischemia, the endogenous gas production by an isolated lung of nitric oxide and carbon monoxide is simultaneously monitored in real time. The exhaled gas is analysed with two very sensitive and selective laser spectrometers developed upon the technique of optical-feedback cavity-enhanced absorption spectroscopy. Exhaled gas concentration measured for an ex-vivo lung is compared to the corresponding production by the whole living pig, measured before euthanasia. On-line measurements of the fraction of nitric oxide in exhaled gas (FENO) in isolated lungs are reported here for the first time, allowing to resolve the respiratory cycles. In this study, performed on 9 animals, FENO by isolated lungs range from 3.3 to 10.6 ppb with a median value of 4.4 ppb. Pairing ex-vivo lung and pig measurements allows to demonstrate a systematic increase of FENO in the ex-vivo lung as compared to the living animal, by a factor of 3 ± 1.2. Measurements of the fraction of carbon monoxide in exhaled gas (FECO) confirm levels recorded during previous studies driven to evaluate FECO as a potential marker of ischemia reperfusion injuries. FECO production by ex-vivo lungs ranges from 0.31 to 2.3 ppm with a median value of 0.8 ppm. As expected, these FECO values are lower than the production by the corresponding whole pig body, by a factor of 6.9 ± 2.7.

[Visual fluorescence combined with laser spectroscopy in surgery for intramedullary spinal cord tumors]

BACKGROUND

Surgical treatment of intramedullary spinal cord tumors is aimed at total resection of tumor with maximum preservation of neurological and functional status. In some cases, intramedullary tumors have unclear dissection plane or gliosis zone. This area is not a tumor and does not require resection. However, it is difficult to distinguish visually intact spinal cord tissue and tumor at the last surgical stages. Thus, we evaluated the effectiveness of fluorescence combined with laser spectroscopy in surgical treatment of intramedullary spinal cord tumors.

OBJECTIVE

To determine the effectiveness of visual fluorescence combined with laser spectroscopy in surgery for intramedullary spinal cord tumors.

MATERIAL AND METHODS

There were 850 patients with intramedullary spinal cord tumors for the period 2001-2019. In 35 cases, intraoperative fluoroscopy with laser spectroscopy were used. All patients underwent a comprehensive pre- and postoperative clinical and instrumental examination (general and neurological status, McCormick grade, spinal cord MRI). Carl Zeiss OPMI Pentero microscope with a fluorescent module was used for intraoperative fluorescence diagnosis. A domestic preparation 5-ALA «ALASENS» (State Research Center NIOPIK, Moscow, Russia) was used for induction of visible fluorescence. Laser spectroscopy was carried out using a LESA-01-BIOSPEK spectrum analyzer. Morphological analysis of intramedullary spinal cord tumors was performed in the neuromorphology laboratory of the Burdenko Neurosurgery Center.

RESULTS

Intramedullary anaplastic ependymoma and astrocytoma, as well as conventional ependymoma were characterized by the highest index of 5-ALA accumulation. Intramedullary hemangioblastoma and cavernoma do not accumulate 5-aminolevulinic acid due to morphological structure of these tumors. In particular, there are no cells capable of capturing and processing 5-ALA in these tumors. Sensitivity of visual fluorescence combined with laser spectroscopy varies from 0% to 100% depending on the histological type of tumor: hemangiogblastoma and cavernoma - 0%, low-grade astrocytoma - 70%, high-grade astrocytoma - 80%, ependymoma - 92%, anaplastic ependymoma 100%. Dissection plane is absent in anaplastic ependymoma, high-grade astrocytoma. We often observed gliosis during resection of ependymoma. This tissue is not a part of tumor. Intraoperative metabolic navigation with neurophysiological monitoring are advisable for total tumor resection in case of unclear dissection plane and peritumoral gliosis.

CONCLUSION

Visual fluorescence combined with laser spectroscopy is a perspective method for intraoperative imaging of tumor remnants and total resection of intramedullary spinal cord tumors with minimum risk of neurological impairment.

Simultaneous Detection of Multiple Atmospheric Components Using an NIR and MIR Laser Hybrid Gas Sensing System

A compact multi-gas sensor has been developed for simultaneous detection of atmospheric carbon monoxide (CO), nitrous oxide (N₂O), and methane (CH₄). Instead of the traditional time-division multiplexing detection technique, two lasers having center emission wavelengths of 1.653 μm (near-infrared (NIR) diode feedback (DFB) laser diode) and 4.56 μm (mid-infrared (MIR) quantum cascade laser) were simultaneously coupled to a multipass cell using a dichroic mirror, which significantly decreased the complexity of the measurement and increased the temporal resolution of the spectrometer. Wavelength modulation spectroscopy (WMS) with the second-harmonic detection technique (WMS-2f) was used to improve the detection sensitivity. A LabVIEW-based digital lock-in amplifier (DLIA) algorithm and system control unit was developed to make the system more compact and flexible. Allan deviation analysis indicates that detection limits of 6.36 ppb by volume for CO, 4.9 ppb by volume for N₂O, and 23.6 ppb by volume for CH₄ are obtained at 1 s averaging time, and the sensitivity can be improved to 0.44 ppb for CO, 0.41 ppb for N₂O, and 2 ppb for CH₄ at an optimal averaging time of 900 s. Two-day real-time measurement in ambient air was performed to demonstrate the long-term stability of the sensor system.

Widely-Tunable Quantum Cascade-Based Sources for the Development of Optical Gas Sensors

Spectroscopic techniques based on Distributed FeedBack (DFB) Quantum Cascade Lasers (QCL) provide good results for gas detection in the mid-infrared region in terms of sensibility and selectivity. The main limitation is the QCL relatively low tuning range (~10 cm^-1) that prevents from monitoring complex species with broad absorption spectra in the infrared region or performing multi-gas sensing. To obtain a wider tuning range, the first solution presented in this paper consists of the use of a DFB QCL array. Tuning ranges from 1335 to 1387 cm^-1 and from 2190 to 2220 cm^-1 have been demonstrated. A more common technique that will be presented in a second part is to implement a Fabry-Perot QCL chip in an external-cavity (EC) system so that the laser could be tuned on its whole gain curve. The use of an EC system also allows to perform Intra-Cavity Laser Absorption Spectroscopy, where the gas sample is placed within the laser resonator. Moreover, a technique only using the QCL compliance voltage technique can be used to retrieve the spectrum of the gas inside the cavity, thus no detector outside the cavity is needed. Finally, a specific scheme using an EC coherent QCL array can be developed. All these widely-tunable Quantum Cascade-based sources can be used to demonstrate the development of optical gas sensors.

Photoproducts of the Photodynamic Therapy Agent Verteporfin Identified via Laser Interfaced Mass Spectrometry

Verteporfin, a free base benzoporphyrin derivative monoacid ring A, is a photosensitizing drug for photodynamic therapy (PDT) used in the treatment of the wet form of macular degeneration and activated by red light of 689 nm. Here, we present the first direct study of its photofragmentation channels in the gas phase, conducted using a laser interfaced mass spectrometer across a broad photoexcitation range from 250 to 790 nm. The photofragmentation channels are compared with the collision-induced dissociation (CID) products revealing similar dissociation pathways characterized by the loss of the carboxyl and ester groups. Complementary solution-phase photolysis experiments indicate that photobleaching occurs in verteporfin in acetonitrile; a notable conclusion, as photoinduced activity in Verteporfin was not thought to occur in homogenous solvent conditions. These results provide unique new information on the thermal break-down products and photoproducts of this light-triggered drug.

Simultaneous δ2 H and δ18 O analyses of water inclusions in halite with off-axis integrated cavity output spectroscopy

Stable isotope compositions of ancient halite fluid inclusions have been recognized to be valuable tools for reconstructing past environments. Nevertheless, in order to better understand the genesis of halite deposits, it could be of great interest to combine both δ² H and δ¹⁸ O measurements of the water trapped as inclusions in the defects of the mineral lattice. We developed a method combining off-axis integrated cavity output spectroscopy (OA-ICOS) connected on line with a modified elemental analyzer (EA-OA-ICOS) to perform those measurements. The first step was to test the method with synthetic halite crystals precipitated in the laboratory from isotopically calibrated waters. Water isotopic signatures have been measured with conventional techniques, equilibration for δ¹⁸ O and chromium reduction for δ² H. Then, we modified and optimized a conventional EA to connect it online with an OA-ICOS instrument for H₂ O measurements. The technique is first evaluated for calibrated free water samples. The technique is also evaluated for salt matrix effect, accuracy, and linearity for both isotopic signatures. Then, the technique is used to measure simultaneously δ² H and δ¹⁸ O values of halite water inclusions precipitated from the evaporation experiments. Data generated with this new technique appeared to be comparable with those inferred from prior off-line technique studies. The advantages offered by the OA-ICOS technique are the simultaneous acquisition of both isotopic ratios and the substantial reduction of data acquisition time and sample aliquot size. Natural halite samples have been analyzed with this method. Natural halite samples as old as Precambrian have also been analyzed with this method.

Laser-Based Trace Gas Detection inside Hollow-Core Fibers: A Review

Thanks to the guidance of an optical wave in air, hollow-core fibers may serve as sampling cells in an optical spectroscopic system. This paper reviews applications of hollow-core optical fibers to laser-based gas sensing. Three types of hollow-core fibers are discussed: Hollow capillary waveguides, photonic band-gap fibers, and negative curvature fibers. Their advantages and drawbacks when used for laser-based trace gas detection are analyzed. Various examples of experimental sensing systems demonstrated in the literature over the past 20 years are discussed.

Antiresonant Hollow-Core Fiber-Based Dual Gas Sensor for Detection of Methane and Carbon Dioxide in the Near- and Mid-Infrared Regions

In this work, we present for the first time a laser-based dual gas sensor utilizing a silica-based Antiresonant Hollow-Core Fiber (ARHCF) operating in the Near- and Mid-Infrared spectral region. A 1-m-long fiber with an 84-µm diameter air-core was implemented as a low-volume absorption cell in a sensor configuration utilizing the simple and well-known Wavelength Modulation Spectroscopy (WMS) method. The fiber was filled with a mixture of methane (CH₄) and carbon dioxide (CO₂), and a simultaneous detection of both gases was demonstrated targeting their transitions at 3.334 µm and 1.574 µm, respectively. Due to excellent guidance properties of the fiber and low background noise, the proposed sensor reached a detection limit down to 24 parts-per-billion by volume for CH₄ and 144 parts-per-million by volume for CO₂. The obtained results confirm the suitability of ARHCF for efficient use in gas sensing applications for over a broad spectral range. Thanks to the demonstrated low loss, such fibers with lengths of over one meter can be used for increasing the laser-gas molecules interaction path, substituting bulk optics-based multipass cells, while delivering required flexibility, compactness, reliability and enhancement in the sensor’s sensitivity.

Forensic Analysis of Commercial Inks by Laser-Induced Breakdown Spectroscopy (LIBS)

Laser-induced breakdown spectroscopy (LIBS) was tested for all of the relevant issues in forensic examinations of commercial inks, including classification of pen inks on one paper type and on different paper types, determination of the deposition order of layered inks, and analysis of signatures and toners on one questioned document. The scope of this work was to determine the potential of a single LIBS setup that is compatible with portable instruments for different types of ink analysis, rather than building a very large database for inks and papers. We identified up to seven metals characteristic for the examined inks, which allowed to fully discriminate all eight black inks on one type of printing paper. When the inks were tested on ten different papers, the correct classification rates for some of them were reduced for reasons thoroughly studied and explained. The replicated tests on three crossing points, each one involving a pair of blue or black inks, were successful in five cases out of six. In the test simulating documents of forensic interest (questioned documents), LIBS was able to correctly identify the differences in three inks used for signatures on one of the three pages and the use of different printing inks on each page of the document.

Laser-Plasma Spectroscopy of Hydroxyl with Applications

This article discusses laser-induced laboratory-air plasma measurements and analysis of hydroxyl (OH) ultraviolet spectra. The computations of the OH spectra utilize line strength data that were developed previously and that are now communicated for the first time. The line strengths have been utilized extensively in interpretation of recorded molecular emission spectra and have been well-tested in laser-induced fluorescence applications for the purpose of temperature inferences from recorded data. Moreover, new experiments with Q-switched laser pulses illustrate occurrence of molecular recombination spectra for time delays of the order of several dozen of microseconds after plasma initiation. The OH signals occur due to the natural humidity in laboratory air. Centrifugal stretching of the Franck-Condon factors and r-centroids are included in the process of determining the line strengths that are communicated as a Supplementary File. Laser spectroscopy applications of detailed OH computations include laser-induced plasma and combustion analyses, to name but two applications. This work also includes literature references that address various diagnosis applications.

Laser-Plasma Spatiotemporal Cyanide Spectroscopy and Applications

This article reports new measurements of laser-induced plasma hypersonic expansion measurements of diatomic molecular cyanide (CN). Focused, high-peak-power 1064 nm Q-switched radiation of the order of 1 TW/cm 2 generated optical breakdown plasma in a cell containing a 1:1 molar gas mixture of N 2 and CO 2 at a fixed pressure of 1.1 × 10 5 Pascal and in a 100 mL/min flow of the mixture. Line-of-sight (LOS) analysis of recorded molecular spectra indicated the outgoing shockwave at expansion speeds well in excess of Mach 5. Spectra of atomic carbon confirmed increased electron density near the shockwave, and, equally, molecular CN spectra revealed higher excitation temperature near the shockwave. Results were consistent with corresponding high-speed shadowgraphs obtained by visualization with an effective shutter speed of 5 nanoseconds. In addition, LOS analysis and the application of integral inversion techniques allow inferences about the spatiotemporal plasma distribution.

Hydrogen Sensor Based on Tunable Diode Laser Absorption Spectroscopy

A laser-based hydrogen (H₂) sensor using wavelength modulation spectroscopy (WMS) was developed for the contactless measurement of molecular hydrogen. The sensor uses a distributed feedback (DFB) laser to target the H₂ quadrupole absorption line at 2121.8 nm. The H₂ absorption line exhibited weak collisional broadening and strong collisional narrowing effects. Both effects were investigated by comparing measurements of the absorption linewidth with detailed models using different line profiles including collisional narrowing effects. The collisional broadening and narrowing parameters were determined for pure hydrogen as well as for hydrogen in nitrogen and air. The performance of the sensor was evaluated and the sensor applicability for H₂ measurement in a range of 0–10 %v of H₂ was demonstrated. A precision of 0.02 %v was achieved with 1 m of absorption pathlength (0.02 %v∙m) and 1 s of integration time. For the optimum averaging time of 20 s, precision of 0.005 %v∙m was achieved. A good linear relationship between H₂ concentration and sensor response was observed. A simple and robust transmitter–receiver configuration of the sensor allows in situ installation in harsh industrial environments.

Integrated Laser Sensor (ILS) for Remote Surface Analysis: Application for Detecting Explosives in Fingerprints

Here, we describe an innovative Integrated Laser Sensor (ILS) that combines four spectroscopic techniques and two vision systems into a unique, transportable device. The instrument performs Raman and Laser-Induced Fluorescence (LIF) spectroscopy excited at 355 nm and Laser-Induced Breakdown Spectroscopy (LIBS) excited at 1064 nm, and it also detects Laser Scattering (LS) from the target under illumination at 650 nm. The combination of these techniques supplies information about: material change from one scanning point to another, the presence of surface contaminants, and the molecular and elemental composition of top target layers. Switching between the spectroscopic techniques and the laser wavelengths is fully automatic. The instrument is equipped with an autofocus, and it performs scanning with a chosen grid density over an interactively-selected target area. Alternative to the spectroscopic measurements, it is possible to switch the instrument to a high magnification target viewing. The working distances tested until now are between 8.5 and 30 m. The instrument is self-powered and remotely controlled via wireless communication. The ILS has been fully developed at ENEA for security applications, and it was successfully tested in two outdoor campaigns where an automatic recognition of areas containing explosives in traces had been implemented. The strategies for the identification of nitro-compounds placed on various substrates as fingerprints and the results obtained at a working distance of 10 m are discussed in the following.

Kagome Hollow Core Fiber-Based Mid-Infrared Dispersion Spectroscopy of Methane at Sub-ppm Levels

In this paper, we demonstrate the laser-based gas sensing of methane near 3.3 µm inside hollow-core photonic crystal fibers. We exploit a novel anti-resonant Kagome-type hollow-core fiber with a large core diameter (more than 100 µm) which results in gas filling times of less than 10 s for 1.3-m-long fibers. Using a difference frequency generation source and chirped laser dispersion spectroscopy technique, methane sensing with sub-parts-per-million by volume detection limit is performed. The detection of ambient methane is also demonstrated. The presented results indicate the feasibility of using a hollow-core fiber for increasing the path-length and improving the sensitivity of the mid-infrared gas sensors.

[Intraoperative fluorescence diagnostics in surgery of intracranial meningiomas: analysis of 101 cases]

Fluorescence diagnostics has been extensively applied in surgery of malignant brain gliomas. However, the use of this technique in surgery of intracranial meningiomas has remained controversial.

OBJECTIVE

The study objective was to assess the sensitivity of 5-aminolevulinic acid-based (5-ALA) fluorescence diagnostics in surgery of brain meningiomas and to clarify the clinical and biological factors that may influence the fluorescent effect.

MATERIAL AND METHODS

The study consistently included 101 patients with intracranial meningiomas of various locations who were operated on using 5-ALA. There were 28 (27.72%) males and 73 (72.27%) females (median age, 54 years). In all patients, surgery was performed using an operating microscope equipped with a fluorescent module; in 24 of these, laser spectroscopy was used. For comparison of chances to observe the fluorescent effect of 5-ALA in patients having meningiomas with different WHO histological grades (Grade I vs Grade II-III), we performed a meta-analysis that included 10 studies (the largest series) on outcomes of surgical treatment of meningiomas using intraoperative fluorescence diagnostics.

RESULTS

Of 101 patients included in this series, observable fluorescence was detected in 95 (94.1%) patients: weak fluorescence in 12 (11.9%), moderate fluorescence in 23 (22.8%) cases, and strong fluorescence in 60 (59.4%) patients. There was no statistically significant relationship (p>0.05) between the rate and intensity of observable fluorescence and the tumor growth pattern (primary/continued), location, WHO grade of malignancy, and histological subtype. In the absence of intraoperative bleeding, tumor fluorescence was statistically significantly brighter (p=0.02). Of 26 patients with hyperostosis, bone fluorescence was observed in 11 (42.3%) cases. There was no statistically significant relationship between administration of dexamethasone, its dose, administration of anticonvulsants, gastrointestinal tract diseases, as well as diabetes mellitus and the fluorescence intensity. There was also no significant relationship between the extent of tumor resection (Simpson scale) and the presence of fluorescence as well as its intensity. Comparison of the observable fluorescence intensity and the laser spectroscopy indicators revealed a significant correlation (r=0.75; p=0.005).

CONCLUSION

Meningioma is a well fluorescent tumor, with the technique sensitivity being 94.1%. In some cases, the use of fluorescence diagnostics in surgery of meningiomas improves identification of residual tumor fragments and enables correction of a surgical approach. To assess the effect of fluorescence diagnostics on the recurrence rate and disease-free duration, further research is required.

Laser-based gas absorption spectroscopy in decaying hip bone: water vapor as a predictor of osteonecrosis

Affluent blood flow through a complicated net of vessels supplies skeletal bone tissue with oxygen and nutrients. Due to accidental events or physiological processes, the blood supply might be deficient or even disrupted, and the healthy bone decays in a process that, for the hip location, is denoted as osteonecrosis of the femoral head (ONFH) or avascular femoral head necrosis. Early diagnosis is important for the prognosis. X-ray-based imaging, such as CT or MRI, is not of much value for the early detection. As the decay theoretically is associated with the development of gas-filled pores, gas analysis should have diagnostic value. We have introduced gas in scattering media absorption spectroscopy, as a complementary modality. Eighteen extracted femoral joint heads, diseased as well as normal, were investigated. Diseased samples are associated with clear signals due to water vapor, whereas the normal ones largely lack such features. The results suggest that free water vapor could serve as an early indicator of pore development and thus as a promising predictor of ONFH pathological changes, once the technique has been fully refined.

Isotope ratio laser spectroscopy to disentangle xylem-transported from locally respired CO2 in stem CO2 efflux

Respired CO2 in woody tissues radially diffuses to the atmosphere or it is transported upward with the transpiration stream, making the origin of CO2 in stem CO2 efflux (EA) uncertain, which may confound stem respiration (RS) estimates. An aqueous 13C-enriched solution was infused into stems of Populus tremula L. trees, and real-time measurements of 13C-CO2 and 12C-CO2 in EA were performed via Cavity Ring Down Laser Spectroscopy (CRDS). The contribution of locally respired CO2 (LCO2) and xylem-transported CO2 (TCO2) to EA was estimated from their different isotopic composition. Mean daily values of TCO2/EA ranged from 13% to 38%, evidencing the notable role that xylem CO2 transport plays in the assessment of stem respiration. Mean daily TCO2/EA did not differ between treatments of drought stress and light exclusion of woody tissues, but they showed different TCO2/EA dynamics on a sub-daily time scale. Sub-daily CO2 diffusion patterns were explained by a light-induced axial CO2 gradient ascribed to woody tissue photosynthesis, and the resistance to radial CO2 diffusion determined by bark water content. Here, we demonstrate the outstanding potential of CRDS paired with 13C-CO2 labelling to advance in the understanding of CO2 movement at the plant-atmosphere interface and the respiratory physiology in woody tissues.

Liposome permeability probed by laser light scattering

We have developed a laboratory project in which students prepare liposomes, expose them to hyperosmotic and hypoosmotic solutions, and follow the resulting shrinking and swelling (respectively) with laser light scattering. Each light intensity transient can be fit to an exponential decline or rise, with the decay constant (k) and the amplitude (ΔV_max ) being indirectly related to the kinetics and thermodynamics (respectively) of transmembrane osmotic flux. Students vary the experimental system by changing the types and concentrations of osmolytes such as alcohols, amides, and salts. Students then compare how these changes alter the rate and extent of osmotic flux. This upper division biochemistry laboratory project is a challenging and rewarding one that exposes students to a biomolecule (lipid) and a spectroscopic technique (laser spectroscopy) that are not commonly used in the undergraduate laboratory setting. © 2019 International Union of Biochemistry and Molecular Biology, 47(3):239-246, 2019.

Laser Spectroscopy and Lifetime Measurements of the S1 State of Tetracyanoquinodimethane (TCNQ) in a Cold Gas-Phase Free-Jet

The S₁ electronic state of 7,7,8,8-Tetracyanoquinodimethane (TCNQ) has been investigated by laser induced fluorescence (LIF), dispersed fluorescence (DF) spectroscopy, and lifetime measurements under jet-cooled conditions in the gas-phase. The LIF spectrum showed a weak origin band at 412.13 nm (24262 cm^-1 ) with prominent progression and combination bands involving vibrations of 327, 1098, and 2430 cm^-1 . In addition, very strong bands appeared at ∼363.6 nm (3300 cm^-1 above the origin). Both the LIF and DF spectra indicate considerable geometric change in the S₁ state. The fluorescence lifetime of S₁ at zero-point level was obtained to be 220 ns. This lifetime is 40 times longer than the radiative lifetime estimated from the S₁ -S₀ oscillator strength. Furthermore, the lifetimes of the vibronic bands exhibited drastic energy dependence, indicating a strong mixing with the triplet (T₁ ) or intramolecular charge-transfer (CT) state. This study is thought to disclose intrinsic nature of TCNQ, which has been well known as a component of organic semiconductors and a versatile p-type dopant.

Mid-infrared feed-forward dual-comb spectroscopy

Mid-infrared high-resolution spectroscopy has proven an invaluable tool for the study of the structure and dynamics of molecules in the gas phase. The advent of frequency combs advances the frontiers of precise molecular spectroscopy. Here we demonstrate, in the important 3-µm spectral region of the fundamental CH stretch in molecules, dual-comb spectroscopy with experimental coherence times between the combs that exceed half an hour. Mid-infrared Fourier transform spectroscopy using two frequency combs with self-calibration of the frequency scale, negligible contribution of the instrumental line shape to the spectral profiles, high signal-to-noise ratio, and broad spectral bandwidth opens up opportunities for precision spectroscopy of small molecules. Highly multiplexed metrology of line shapes may be envisioned.