Efficient chiral hydrogel template based on supramolecular self-assembly driven by chiral carbon dots for circularly polarized luminescence

Since the chiral emission of excited states is observed on carbon dots (CDs), exploration towards the design and synthesis of chiral CDs nanomaterials with circularly polarized luminescence (CPL) properties has been at a brisk pace. In this regard, the "host and guest" co-assembly strategy based on the combination of CDs and chiral templates has been of unique interest recently for its convenient operation, multicolor tunable CPL, and wide application of prepared CDs-composited materials in optoelectronic devices and information encryption. However, the existing chiral templates that match perfectly with chiral CDs exhibiting optical activity both in ground and excited states are rather scarce. In this work, we synthesize the chiral CDs that could induce the spontaneous supramolecular self-assembly of N-(9-fluorenylmethox-ycarbonyl) (Fmoc)-protected glutamic acid to form chiral hydrogels with helical nanostructure. The co-assembled hydrogels show powerful chiral template function, which not only enable chiral CDs with a luminescence dissymmetry factor (glum) up to 10-2, but also have universal chiral transfer to inserted dye molecules, realizing full-color CPL and Förster resonance energy transfer (FRET) CPL as well as the distinction between left and right circularly polarized light. This CPL-active template based on chiral CDs enriches the design scenario of chiral functionalized nanomaterials.

Supramolecular Polymerization as a Tool to Reveal the Magnetic Transition Dipole Moment of Heptazines

Heptazine derivatives have attracted significant interest due to their small S1-T1 gap, which contributes to their unique electronic and optical properties. However, the nature of the lowest excited state remains ambiguous. In the present study, we characterize the lowest optical transition of heptazine by its magnetic transition dipole moment. To measure the magnetic transition dipole moment, the flat heptazine must be chiroptically active, which is difficult to achieve for single heptazine molecules. Therefore, we used supramolecular polymerization as an approach to make homochiral stacks of heptazine derivatives. Upon formation of the supramolecular polymers, the preferred helical stacking of heptazine introduces circular polarization of absorption and fluorescence. The magnetic transition dipole moments for the S1 ← S0 and S1 → S0 are determined to be 0.35 and 0.36 Bohr magneton, respectively. These high values of magnetic transition dipole moments support the intramolecular charge transfer nature of the lowest excited state from nitrogen to carbon in heptazine and further confirm the degeneracy of S1 and T1.

A Chirally Locked Bis-perylene Diimide Macrocycle: Consequences for Chiral Self-Assembly and Circularly Polarized Luminescence

Macrocycles containing chiral organic dyes are highly valuable for the development of supramolecular circularly polarized luminescent (CPL) materials, where a preorganized chiral framework is conducive to directing π-π self-assembly and delivering a strong and persistent CPL signal. Here, perylene diimides (PDIs) are an excellent choice for the organic dye component because, alongside their tunable photophysical and self-assembly properties, functionalization of the PDI's core yields a twisted, chiral π-system, capable of CPL. However, configurationally stable PDI-based macrocycles are rare, and those that are also capable of π-π self-assembly beyond dimers are unprecedented, both of which are advantageous for robust self-assembled chiroptical materials. In this work, we report the first bay-connected bis-PDI macrocycle that is configurationally stable (ΔG⧧ > 155 kJ mol-1). We use this chirally locked macrocycle to uncover new knowledge of chiral PDI self-assembly and to perform new quantitative CPL imaging of the resulting single-crystal materials. As such, we discover that the chirality of a 1,7-disubstituted PDI provides a rational route to designing H-, J- and concomitant H- and J-type self-assembled materials, important arrangements for optimizing (chir)optical and charge/energy transport properties. Indeed, we reveal that CPL is amplified in the single crystals of our chiral macrocycle by quantifying the degree of emitted light circular polarization from such materials for the first time using CPL-Laser Scanning Confocal Microscopy.

A supramolecular assembly-based strategy towards the generation and amplification of photon up-conversion and circularly polarized luminescence

For the molecular properties in which energy transfer/migration is determinantal, such as triplet-triplet annihilation-based photon up-conversion (TTAUC), the overall performance is largely affected by the intermolecular distance and relative molecular orientations. In such scenarios, tools that may steer the intermolecular interactions and provide control over molecular organisation in the bulk, become most valuable. Often these non-covalent interactions, found predominantly in supramolecular assemblies, enable pre-programming of the molecular network in the assembled structures. In other words, by employing supramolecular chemistry principles, an arrangement where molecular units are arranged in a desired fashion, very much like a Lego toy, could be achieved. This leads to enhanced energy transfer from one molecule to other. In recent past, chiral luminescent systems have attracted huge attention for producing circularly polarized luminescence (CPL). In such systems, chirality is a necessary requirement. Chirality induction/transfer through supramolecular interactions has been known for a long time. It was realized recently that it may help in the generation and amplification of CPL signals as well. In this review article we have discussed the applicability of self-/co-assembly processes for achieving maximum TTA-UC and CPL in various molecular systems.

Fundamentals, Advances, and Artifacts in Circularly Polarized Luminescence (CPL) Spectroscopy

Objects are chiral when they cannot be superimposed with their mirror image. Materials can emit chiral light with an excess of right- or left-handed circular polarization. This circularly polarized luminescence (CPL) is key to promising future applications, such as highly efficient displays, holography, sensing, enantiospecific discrimination, synthesis of drugs, quantum computing, and cryptography. Here, a practical guide to CPL spectroscopy is provided. First, the fundamentals of the technique are laid out and a detailed account of recent experimental advances to achieve highly sensitive and accurate measurements is given, including all corrections required to obtain reliable results. Then the most common artifacts and pitfalls are discussed, especially for the study of thin films, for example, based on molecules, polymers, or halide perovskites, as opposed to dilute solutions of emitters. To facilitate the adoption by others, custom operating software is made publicly available, equipping the reader with the tools needed for successful and accurate CPL determination.

Troubleshooting spectral artifacts from biplate retarders for reliable Stokes spectropolarimetry

Polarimetry is generally used to determine the polarization state of light beams in various research fields, such as biomedicine, astronomy, and materials science. In particular, the rotating quarter-wave plate polarimeter is an inexpensive and versatile option used in several single-wavelength applications to determine the four Stokes parameters. Extending this technique to broadband spectroscopic measurements is of great scientific interest since the information on light polarization is highly sensitive to anisotropic phenomena. However, the need for achromatic polarizing elements, especially quarter-wave plates, requires special attention in their modeling. In this study, we implemented a rotating retarder spectropolarimeter for broadband measurements using a commercially available quasi-achromatic biplate retarder over the visible range. Here, we present a comprehensive approach for troubleshooting this type of spectropolarimeter through the observation of artifacts stemming from the standard single-plate retarder model. Then, we derive a more suitable model for a quasi-achromatic retarder consisting of a biplate junction. This new biplate model requires knowledge of the intrinsic dispersive properties of the biplate, namely the equivalent retardance, fast axis tilt, and rotatory angle. Hence, in this study, we also show a self-consistent methodology to determine these biplate properties using the same polarimeter apparatus so that accurate Stokes parameters can be determined independently. Finally, the comparison of data generated with the standard single-plate and new biplate models shows a significant improvement in the measurement precision of the investigated polarization states, which confirms that remodeling the retarder for reliable spectropolarimetry is necessary.

Molecular Properties of 3d and 4f Coordination Compounds Deciphered by Raman Optical Activity Spectroscopy

Molecular properties of coordination compounds can be efficiently studied by vibrational spectroscopy. The scope of Raman spectroscopy has been greatly enhanced by the introduction of Raman optical activity (ROA) sensitive to chirality. The present review describes some of its recent applications to study the coordination compounds. 3d and 4f metal complexes often absorb the excitation light, or exhibit luminescence. Therefore, effects caused in ROA spectra by electronic circular dichroism (ECD) and circularly polarized luminescence (CPL) must be taken into consideration.In 3d metal complexes ECD and circularly-polarized Raman scattering compete with the resonance ROA (RROA) signal. Pure RROA spectrum can thus be obtained by subtracting the so-called ECD-Raman component. CPL is frequently encountered in 4f systems. While it can mask the ROA spectra, it is useful to study molecular structure. These electronic effects can be reduced by using near-infrared excitation although vibrational ROA signal is much weaker compared to the usual green laser excitation scenario. The ROA methodology is thus complex, but capable of providing unique information about the molecules of interests and their interaction with light.

Chiral metal-organic frameworks for photonics

Recently, there has been significant interest in the use of chiral metal-organic frameworks (MOFs) and coordination polymers (CPs) for photonics applications. The promise of these materials lies in the ability to tune their properties through judicious selection of the metal and ligand components. Additionally, the interaction of guest species with the host framework can be exploited to realise new functionalities. In this review, we outline the methods for synthesising chiral MOFs and CPs, then analyse the recent innovations in their use for various optical and photonics applications. We focus on two emerging directions in the field of MOF chemistry - circularly polarised luminescence (CPL) and chiroptical switching - as well as the latest developments in the use of these materials for second-order nonlinear optics (NLO), particularly second-harmonic generation (SHG). The current challenges encountered so far, their possible solutions, and key directions for further research are also outlined. Overall, given the results demonstrated to date, chiral MOFs and CPs show great promise for use in future technologies such as optical communication and computing, optical displays, and all-optical devices.

Indirect Bandgap Emission of the Metal Halide Perovskite FAPbI3 at Low Temperatures

In this work, we provide a picture of the band structure of FAPbI₃ by investigating low-temperature spin-related photophysics. When the temperature is lower than 120 K, two photoluminescence peaks can be observed. The lifetime of the newly emerged low-energy emission is much longer than that of the original high-energy one by two orders of magnitude. We propose that Rashba effect-caused spin-dependent band splitting is the reason for the emergence of the low-energy emission and verify this using the magneto-optical measurements.

Synthesis, structural characterization, and chiroptical properties of planarly and axially chiral boranils

2-Amino[2.2]paracyclophane reacts with salicylaldehyde or 2-hydroxyacetophenone to yield imines that then give access to a new series of boranils (8b-d) upon complexation with BF₂ . These novel boron-containing compounds display both planar and axial chiralities and were examined experimentally and computationally. In particular, their photophysical and chiroptical properties were studied and compared to newly prepared, simpler boranils (9a-d) exhibiting axial chirality only. Less sophisticated chiral architectures were shown to demonstrate overall stronger circularly polarized luminescence (CPL) activity.

One-Dimensional Chiral Copper Iodide Chain-Like Structure Cu4 I4 (R/S-3-quinuclidinol)3 with Near-Unity Photoluminescence Quantum Yield and Efficient Circularly Polarized Luminescence

Chiral organic-inorganic hybrid metal halide materials have shown great potential for circularly polarized luminescence (CPL) related applications for their tunable structures and efficient emissions. Here, this work combines the highly emissive Cu₄ I₄ cubane cluster with chiral organic ligand R/S-3-quinuclidinol, to construct a new type of 1D Cu-I chains, namely Cu₄ I₄ (R/S-3-quinuclidinol)₃ , crystallizing in noncentrosymmetric monoclinic P2₁ space group. These enantiomorphic hybrids exhibit long-term stability and show bright yellow emission with a photoluminescence quantum yield (PLQY) close to 100%. Due to the successful chirality transfer from the chiral ligands to the inorganic backbone, the enantiomers show intriguing chiroptical properties, such as circular dichroism (CD) and CPL. The CPL dissymmetry factor (g_lum ) is measured to be ≈4 × 10^-3 . Time-resolved photoluminescence (PL) measurements show long averaged decay lifetime up to 10 µs. The structural details within the Cu₄ I₄ reveal the chiral nature of these basic building units, which are significantly different than in the achiral case. This discovery provides new structural insights for the design of high performance CPL materials and their applications in light emitting devices.

Circular depolarization spectroscopy: A new tool to study photo-imprinting of chirality

When irradiating a molecular material containing photo-isomerizable groups with pure circularly polarized light, a particular handedness may get imprinted into the material. To study the mechanism and kinetics of this process in situ and operando, we have developed a new chiroptical tool where the circular polarization of the incident circularly polarized light is monitored after transmission through the photoactive layer. Practical limits to the resolution and sensitivity of the measurements as well as its calibration are discussed. To aid interpretation of experimental results, we present kinetic Monte Carlo simulations on a model for the active material involving photo-induced reorientation of molecules in a cholesteric organization. The simulations support the interpretation of a transient minimum in the degree of circular polarization of the transmitted light in terms of a nematic transient state during photo-inversion of a cholesteric organization in the molecular material.

Mechano-Stimulus and Environment-Dependent Circularly Polarized TADF in Chiral Copper(I) Complexes and Their Application in OLEDs

Molecular emitters that combine circularly polarized luminescence (CPL) and high radiative rate constants of the triplet exciton decay are highly attractive for electroluminescent devices (OLEDs) or next-generation photonic applications, such as spintronics, quantum computing, cryptography, or sensors. However, the design of such emitters is a major challenge because the criteria for enhancing these two properties are mutually exclusive. In this contribution, we show that enantiomerically pure {Cu(Cbz^R)[(S/R)-BINAP]} [R = H (1), 3,6-tBu (2)] are efficient thermally activated delayed fluorescence (TADF) emitters with high radiative rate constants of k_TADF up to 3.1 × 10⁵ s^-1 from ^1/3LLCT states according to our temperature-dependent time-resolved luminescence studies. The efficiency of the TADF process and emission wavelengths are highly sensitive to environmental hydrogen bonding of the ligands, which can be disrupted by grinding of the crystalline materials. The origin of this pronounced mechano-stimulus photophysical behavior is a thermal equilibrium between the ^1/3LLCT states and a ³LC state of the BINAP ligand, which depends on the relative energetic order of the excited states and is prone to inter-ligand C-H···π interactions. The copper(I) complexes are also efficient CPL emitters displaying exceptional dissymmetry values g_lum of up to ±0.6 × 10^-2 in THF solution and ±2.1 × 10^-2 in the solid state. Importantly for application in electroluminescence devices, the C-H···π interactions can also be disrupted by employing sterically bulky matrices. Accordingly, we have investigated various matrix materials for successful implementation of the chiral copper(I) TADF emitters in proof-of-concept CP-OLEDs.

Low-Temperature Luminescence in Organic Helicenes: Singlet versus Triplet State Circularly Polarized Emission

The experimental measurement of the photophysical and chiroptical properties of helicene-based π-conjugated emitters with electron-accepting (-CN, -py, -NO₂) or donating (TMS, NMe₂, NH₂) moieties is reported at low temperature (77 K). The samples exhibit strong circularly polarized phosphorescence in frozen solution of 2-MeTHF, with a luminescence dissymmetry factor reaching 1.6 × 10^-2 and a lifetime of over 0.46 s for the most active molecule, the nitro compound. The theoretical investigation shows that although the singlet (S₁) and triplet (T₁) excited-state emissions mainly arise from the helicene core, the rotatory strengths of the spin-allowed versus spin-forbidden emission have opposite signs. Further analysis of the spin-orbit coupling matrix elements shows that there is no strong mixing between S₁ and T₁, justifying the different signs of the rotatory strengths. In the case of the nitro compound, the enhanced phosphorescence emission is due to an efficient intersystem crossing.

Circularly polarized luminescence in molecular recognition systems: Recent achievements

Circularly polarized luminescence (CPL) dyes are recognized to be new generation materials and have been actively developed. Molecular recognition systems provide nice approaches to novel CPL materials, such as stimuli-responsive switches and chemical sensing materials. CPL may be induced simply by mixing chiral or achiral, luminescent or nonluminescent host and guest; there are several combinations. Molecular recognition can potentially save time and effort to construct well-ordered chiral structures with noncovalent attractive interactions as compared with the multi-step synthesis of covalently bonded dyes. It is a challenging subject to engage molecular recognition events with CPL, and it is important and interesting to see how it is achieved. In fact, simple molecular recognition systems can even enable the fine adjustment of CPL performance and detailed conformational/configurational analysis of the excited state. Here we overview the recent achievements of simple host-guest complexes capable of exhibiting CPL, summarizing concisely the host/guest structures, CPL intensities, and characteristics.

Spatiotemporal Mapping of Efficient Chiral Induction by Helicene-Type Additives in Copolymer Thin Films

We observed efficient induction of chirality in polyfluorene copolymer thin films by mixing with helicene-type chiral additives based on the dibenzo[c,h]acridine motif. Images obtained from circular dichroism (CD) and circularly polarized luminescence (CPL) microscopy provide information about the chiral arrangements in the thin films with diffraction-limited resolution. The CD signal shows a characteristic dependence on the film thickness, which supports a supramolecular origin of the strong chiral response of the copolymer. In particular, we demonstrate the discrimination between films of opposite chirality based on their ultrafast transient chiral response through the use of femtosecond broadband CD spectroscopy and a newly developed setup for transient CPL spectroscopy with 28 ps time resolution. A systematic variation of the enantiomeric excess of the chiral additive shows that the "Sergeants and Soldiers" concept and "Majority Rules" are not obeyed.

Structural Origin of Enhanced Circularly Polarized Luminescence in Hybrid Manganese Bromides

Chiral hybrid metal halides with a high dissymmetry factor (g_lum ) and a superior photoluminescence quantum yield (PLQY) are promising candidates for circularly polarized luminescence (CPL) light sources. Here, we report eight new chiral hybrid manganese halides, crystallizing in the non-centrosymmetric space group P2₁ 2₁ 2₁ and showing intense CPL emissions. Oppositely-signed circular dichroism (CD) and CPL signals are detected according to the R- and S-configurations of the chiral alkanolammonium cations. Time-resolved PL spectra show long averaged decay lifetimes up to 1 ms for (R-3-quinuclidinol)MnBr₃ (R-1). The g_lum of polycrystalline samples for coordinated structures (23×10^-3 ) is more than doubled compared with the non-coordinated ones (8.5×10^-3 ), due to the structural variations. R-1 exhibit both a high g_lum and a high PLQY (50.2 %). The effective chirality transfer mechanism through coordination bonds, with strongly emissive Mn^II centers, enables a new class of high-performance CPL materials.

Chiral Multi-Resonance TADF Emitters Exhibiting Narrowband Circularly Polarized Electroluminescence with an EQE of 37.2

Highly efficient circularly polarized luminescence (CPL) emitters with narrowband emission remain a formidable challenge for circularly polarized OLEDs (CP-OLEDs). Here, a promising strategy for developing chiral emitters concurrently featuring multi-resonance thermally activated delayed fluorescence (MR-TADF) and circularly polarized electroluminescence (CPEL) is demonstrated by the integration of molecular rigidity, central chirality and MR effect. A pair of chiral green emitters denoted as (R)-BN-MeIAc and (S)-BN-MeIAc is designed. Benefited by the rigid and quasi-planar MR-framework, the enantiomers not only display mirror-image CPL spectra, but also exhibit TADF properties with a high photoluminescence quantum yield of 96 %, a narrow FWHM of 30 nm, and a high horizontal dipole orientation of 90 % in the doped film. Consequently, the enantiomer-based CP-OLEDs achieved excellent external quantum efficiencies of 37.2 % with very low efficiency roll-off, representing the highest device efficiency of all the reported CP-OLEDs.

A Raman optical activity spectrometer can sensitively detect lanthanide circularly polarized luminescence

Recently, many studies have appeared in which the Raman optical activity (ROA) instrument was found to be convenient for measuring circularly polarized luminescence (CPL). Typically, weak lanthanide luminescence including circular polarization could be detected. The new detection scheme is referred to as ROA-CPL spectroscopy. It is particularly useful when also the vibrational (ROA) itself is detectable as the molecule structure can be examined more reliably. In this review, development of this chiroptical approach and its applications in structural studies of biomolecules are summarized.