Improvement of catalytic water oxidation on MnOx films by heat treatment

Electrodeposited Manganese Dioxides and Their Composites as Electrocatalysts for Energy Conversion Reactions

Enhancing the efficiencies of electrochemical reactions for converting renewable energy into clean chemical fuels as well as generating clean energy is critical to achieving carbon neutrality. However, this enhancement can be achieved using materials that are not constrained by resource limitations and those that can be converted into devices in a scalable manner, preferably for industrial applications. This review explores the applications of electrochemically deposited manganese dioxides (MnO2) and their composites as electrochemical catalysts for oxygen evolution (OER) and hydrogen evolution reactions for converting renewable energy into chemical fuels. It also explores their applications as electrochemical catalysts for oxygen reduction reaction (ORR) and bifunctional OER/ORR for the efficient operation of fuel cells and metal-air batteries, respectively. Manganese is the second most abundant transition metal in the Earth's crust, and electrodeposition represents a binder-free and scalable technique for fabricating devices (electrodes). To propose an improved catalyst design, the studies on the electrodeposition mechanism of MnO2 as well as the fabrication techniques for MnO2-based nanocomposites accumulated in the development of electrodes for supercapacitors are also included in this review.

Decoding the Catalytic Potential of Dinuclear 1st-Row Transition Metal Complexes for Proton Reduction and Water Oxidation

The growing interest in renewable energy sources has led to a significant focus on artificial photosynthesis as a means of converting solar energy into lucrative and energy-dense carbonaceous fuels. First-row transition metals have thus been brought to light in the search for efficient and high-performance homogenous molecule catalysts that can accelerate energy transformation and reduce overpotentials during the catalytic process. Their dinuclear complexes have opportunities to enhance the efficiency and stability of these molecular catalysts, primarily for the hydrogen evolution reaction (HER) and water oxidation reaction (WOR). Recently, our group improved the catalytic activity, efficiencies, and stability of dinuclear molecular catalysts, particularly toward HER. Although one dinuclear complex has been tested for WOR, it demonstrated activity as water oxidation precatalysts. First-row transition metals are a great option for sustainable catalysis because they are readily available, reasonably priced, and have multifaceted coordination chemistry. Examples of these metals are cobalt, copper, and manganese. The structure-catalytic performance relationships of this first-row transition metal-based dinuclear catalysts are noteworthily interpreted in this account, providing avenues for optimizing their performance and advancing the development of sustainable and effective energy conversion technologies.

A bioinspired water oxidation catalyst that is ∼1/10th as active as the photosystem II oxygen evolving center at pH 7: a study of activity and stability factors

The activity and stability of a heterogeneous water oxidation catalyst inspired by the Photosystem II - Oxygen Evolving Center (PSII-OEC) is reported. Ca-doped birnessite MnOx supported on a liquid crystalline reduced graphene oxide (LCrGO) substrate exhibited unprecedented performance for an abiological catalyst at pH 7, including an exceedingly low onset overpotential of 0.52 V (vs. 0.48 V reported for the PSII-OEC, 0.75 V for Pt, and 0.72 V for birnesite MnOx) and remarkably high activity per unit area at 0.56 V overpotential (∼10% that of a hypothetical, closely-packed monolayer of OEC sites at their optimum density of 1014 sites per cm2).

Application of manganese oxide-based materials for arsenic removal: A review

In the context of growing arsenic (As) contamination in the world, there is an urgent need for an effective treatment approach to remove As from the environment. Industrial wastewater is one of the primary sources of As contamination, which poses significant risks to both microorganisms and human health, as the presence of As can disrupt the vital processes and synthesis of crucial macromolecules in living organisms. The global apprehension regarding As presence in aquatic environments persists as a key environmental issue. This review summarizes the recent advances and progress in the design, strategy, and synthesis method of various manganese-based adsorbent materials for As removal. Occurrence, removal, oxidation mechanism of As(III), As adsorption on manganese oxide (MnOx)-based materials, and influence of co-existing solutes are also discussed. Furthermore, the existing knowledge gaps of MnOx-based adsorbent materials and future research directions are proposed. This review provides a reference for the application of MnOx-based adsorbent materials to As removal.

Homogeneous or heterogeneous electrocatalysis: reinvestigation of a cobalt coordination compound for water oxidation

A cobalt coordination compound with azo-ligand linkers combined with linked bisulfonate moieties has been argued to be an efficient catalyst for the oxygen-evolution reaction (OER) (H.-T. Shi, X.-X. Li, F.-H. Wu and W.-B. Yu, Dalton Trans., 2017, 46, 16321.). In the previously published report, this cobalt compound (compound 1) was believed to display a high turnover frequency (5 s^-1) at η = 720 mV at pH 9. Herein, the OER in the presence of compound 1 is reinvestigated. The nanosized oxide-based particles formed after the OER in the presence of compound 1 were tracked by electrochemical methods, scanning electron microscopy (SEM), energy dispersive spectrometry (EDX), X-ray diffraction studies (XRD), (High-resolution) transmission electron microscopy ((HR)TEM), Raman spectroscopy, X-ray absorption spectroscopy (XAS), and X-ray photoelectron spectroscopy (XPS). Based on these experiments, it is proposed that a candidate for the true catalyst of the OER in the presence of compound 1 is cobalt oxide. During the OER and using chronoamperometry, the oxidation state of Co ions for the formed Co oxide is (III), but after consecutive CVs the oxidation states of Co ions for the formed Co oxide are (II) and (III). The results shed new light on the role of Co oxide nanoparticles formed in the presence of this Co coordination compound during the OER. Our experimental data also show that for the OER in the presence of a homogeneous (pre)catalyst, careful analyses to find the role of metal oxides are necessary for informed progress. The present findings also might help to find the mechanism of the OER in the presence of coordination compounds.

Water-Oxidation Electrocatalysis by Manganese Oxides: Syntheses, Electrode Preparations, Electrolytes and Two Fundamental Questions

The efficient catalysis of the four-electron oxidation of water to molecular oxygen is a central challenge for the development of devices for the production of solar fuels. This is equally true for artificial leaf-type structures and electrolyzer systems. Inspired by the oxygen evolving complex of Photosystem II, the biological catalyst for this reaction, scientists around the globe have investigated the possibility to use manganese oxides (“MnOx”) for this task. This perspective article will look at selected examples from the last about 10 years of research in this field. At first, three aspects are addressed in detail which have emerged as crucial for the development of efficient electrocatalysts for the anodic oxygen evolution reaction (OER): (1) the structure and composition of the “MnOx” is of central importance for catalytic performance and it seems that amorphous, MnIII/IV oxides with layered or tunnelled structures are especially good choices; (2) the type of support material (e.g. conducting oxides or nanostructured carbon) as well as the methods used to immobilize the MnOx catalysts on them greatly influence OER overpotentials, current densities and long-term stabilities of the electrodes and (3) when operating MnOx-based water-oxidizing anodes in electrolyzers, it has often been observed that the electrocatalytic performance is also largely dependent on the electrolyte’s composition and pH and that a number of equilibria accompany the catalytic process, resulting in “adaptive changes” of the MnOx material over time. Overall, it thus has become clear over the last years that efficient and stable water-oxidation electrolysis by manganese oxides can only be achieved if at least four parameters are optimized in combination: the oxide catalyst itself, the immobilization method, the catalyst support and last but not least the composition of the electrolyte. Furthermore, these parameters are not only important for the electrode optimization process alone but must also be considered if different electrode types are to be compared with each other or with literature values from literature. Because, as without their consideration it is almost impossible to draw the right scientific conclusions. On the other hand, it currently seems unlikely that even carefully optimized MnOx anodes will ever reach the superb OER rates observed for iridium, ruthenium or nickel-iron oxide anodes in acidic or alkaline solutions, respectively. So at the end of the article, two fundamental questions will be addressed: (1) are there technical applications where MnOx materials could actually be the first choice as OER electrocatalysts? and (2) do the results from the last decade of intensive research in this field help to solve a puzzle already formulated in 2008: “Why did nature choose manganese to make oxygen?”.

Investigation of the stability of NiFe-(oxy)hydroxide anodes in alkaline water electrolysis under industrially relevant conditions

Anodic polarization conducted at high current density, elevated temperature, and high KOH concentration impacted the structure and performance of NiFeO_xH_y and NiO_xH_y anodes.

Water oxidation catalyzed by two cobalt complexes: new challenges and questions

Herein, two cobalt complexes as true catalysts for water oxidation were investigated.

Links between peptides and Mn oxide: nano-sized manganese oxide embedded in a peptide matrix

We report on a poly-peptide/Mn oxide nanocomposite as a model for the water-oxidizing catalyst in Photosystem II.

Electrocatalytic Water Oxidation by MnOx /C: In Situ Catalyst Formation, Carbon Substrate Variations, and Direct O2 /CO2 Monitoring by Membrane-Inlet Mass Spectrometry

Layers of amorphous manganese oxides were directly formed on the surfaces of different carbon materials by exposing the carbon to aqueous solutions of permanganate (MnO₄^- ) followed by sintering at 100-400 °C. During electrochemical measurements in neutral aqueous buffer, nearly all of the MnO_x /C electrodes show significant oxidation currents at potentials relevant for the oxygen evolution reaction (OER). However, by combining electrolysis with product detection by using mass spectrometry, it was found that these currents were only strictly linked to water oxidation if MnO_x was deposited on graphitic carbon materials (faradaic O₂ yields >90 %). On the contrary, supports containing sp³ -C were found to be unsuitable as the OER is accompanied by carbon corrosion to CO₂ . Thus, choosing the "right" carbon material is crucial for the preparation of stable and efficient MnO_x /C anodes for water oxidation catalysis. For MnO_x on graphitic substrates, current densities of >1 mA cm^-2 at η=540 mV could be maintained for at least 16 h of continuous operation at pH 7 (very good values for electrodes containing only abundant elements such as C, O, and Mn) and post-operando measurements proved the integrity of both the catalyst coating and the underlying carbon at OER conditions.

Nanosized manganese oxide/holmium oxide: a new composite for water oxidation

Ho₂O₃ as a support for nanosized Mn oxide was used for the synthesis of a new water-oxidizing catalyst.

Nanolayered manganese oxides: insights from inorganic electrochemistry

The electrochemistry of nanolayered Mn oxides in the presence of LiClO₄ at pH = 6.3 under different conditions was studied.

A new strategy to make an artificial enzyme: photosystem II around nanosized manganese oxide

A new strategy to make an artificial enzyme was reported.

Electrosynthesis of Biomimetic Manganese-Calcium Oxides for Water Oxidation Catalysis--Atomic Structure and Functionality

Water-oxidizing calcium-manganese oxides, which mimic the inorganic core of the biological catalyst, were synthesized and structurally characterized by X-ray absorption spectroscopy at the manganese and calcium K edges. The amorphous, birnesite-type oxides are obtained through a simple protocol that involves electrodeposition followed by active-site creation through annealing at moderate temperatures. Calcium ions are inessential, but tune the electrocatalytic properties. For increasing calcium/manganese molar ratios, both Tafel slopes and exchange current densities decrease gradually, resulting in optimal catalytic performance at calcium/manganese molar ratios of close to 10 %. Tracking UV/Vis absorption changes during electrochemical operation suggests that inactive oxides reach their highest, all-Mn(IV) oxidation state at comparably low electrode potentials. The ability to undergo redox transitions and the presence of a minor fraction of Mn(III) ions at catalytic potentials is identified as a prerequisite for catalytic activity.

Manganese Compounds as Water-Oxidizing Catalysts: From the Natural Water-Oxidizing Complex to Nanosized Manganese Oxide Structures

All cyanobacteria, algae, and plants use a similar water-oxidizing catalyst for water oxidation. This catalyst is housed in Photosystem II, a membrane-protein complex that functions as a light-driven water oxidase in oxygenic photosynthesis. Water oxidation is also an important reaction in artificial photosynthesis because it has the potential to provide cheap electrons from water for hydrogen production or for the reduction of carbon dioxide on an industrial scale. The water-oxidizing complex of Photosystem II is a Mn-Ca cluster that oxidizes water with a low overpotential and high turnover frequency number of up to 25-90 molecules of O2 released per second. In this Review, we discuss the atomic structure of the Mn-Ca cluster of the Photosystem II water-oxidizing complex from the viewpoint that the underlying mechanism can be informative when designing artificial water-oxidizing catalysts. This is followed by consideration of functional Mn-based model complexes for water oxidation and the issue of Mn complexes decomposing to Mn oxide. We then provide a detailed assessment of the chemistry of Mn oxides by considering how their bulk and nanoscale properties contribute to their effectiveness as water-oxidizing catalysts.

Photo-assisted electrodeposition of manganese oxide on TaON anodes: effect on water photooxidation capacity under visible light irradiation

Photo-assisted deposition of MnO_xon the TaON anodes enhances activity and stability during water photooxidation.

Manganese oxide supported on gold/iron as a water-oxidizing catalyst in artificial photosynthetic systems

Herein, a new conductive, recyclable, highly dispersible, magnetically separable, environmentally friendly, and nano-sized catalyst for water oxidation is reported.

Scalable Synthesis of Efficient Water Oxidation Catalysts: Insights into the Activity of Flame-Made Manganese Oxide Nanocrystals

Chemical energy storage by water splitting is a promising solution for the utilization of renewable energy in numerous currently impracticable needs, such as transportation and high temperature processing. Here, the synthesis of efficient ultra-fine Mn3O4 water oxidation catalysts with tunable specific surface area is demonstrated by a scalable one-step flame-synthesis process. The water oxidation performance of these flame-made structures is compared with pure Mn2O3 and Mn5O8, obtained by post-calcination of as-prepared Mn3O4 (115 m(2)  g(-1)), and commercial iso-structural polymorphs, probing the effect of the manganese oxidation state and synthetic route. The structural properties of the manganese oxide nanoparticles were investigated by XRD, FTIR, high-resolution TEM, and XPS. It is found that these flame-made nanostructures have substantially higher activity, reaching up to 350 % higher surface-specific turnover frequency (0.07 μmolO2  m(-2)  s(-1)) than commercial nanocrystals (0.02 μmolO2  m(-2)  s(-1)), and production of up to 0.33 mmolO2  molMn (-1)  s(-1). Electrochemical characterization confirmed the high water oxidation activity of these catalysts with an initial current density of 10 mA cm(-2) achieved with overpotentials between 0.35 and 0.50 V in 1 m NaOH electrolyte.

The effect of lanthanum(III) and cerium(III) ions between layers of manganese oxide on water oxidation

Manganese oxide structure with lanthanum(III) or cerium(III) ions between the layers was synthesized by a simple method. The ratio of Mn to Ce or La in samples was 0.00, 0.04, 0.08, 0.16, 0.32, 0.5, 0.82, or 1.62. The compounds were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction studies, and atomic absorption spectroscopy. The compounds show efficient catalytic activity of water oxidation in the presence of cerium(IV) ammonium nitrate with a turnover frequency of 1.6 mmol O2/mol Mn.s. In contrast to the water-oxidizing complex in Photosystem II, calcium(II) has no specific role to enhance the water-oxidizing activity of the layered manganese oxides and other cations can be replaced without any significant decrease in water-oxidizing activities of these layered Mn oxides. Based on this and previously reported results from oxygen evolution in the presence of H 2 (18) O, we discuss the mechanism and the important factors influencing the water-oxidizing activities of the manganese oxides.

Manganese oxides supported on gold nanoparticles: new findings and current controversies for the role of gold

We synthesized manganese oxides supported on gold nanoparticles (diameter <100 nm) by the reaction of KMnO4 with gold nanoparticles under hydrothermal conditions. In this green method Mn oxide is deposited on the gold nanoparticles. The compounds were characterized by scanning electron microscopy, energy-dispersive spectrometry, high-resolution transmission electron microscopy, X-ray diffraction, UV-Vis spectroscopy, Fourier transform infrared spectroscopy, and atomic absorption spectroscopy. In the next step, the water-oxidizing activities of these compounds in the presence of cerium(IV) ammonium nitrate as a non-oxo transfer oxidant were studied. The results show that these compounds are good catalysts toward water oxidation with a turnover frequency of 1.0 ± 0.1 (mmol O2/(mol Mn·s)). A comparison with other previously reported Mn oxides and important factors influencing the water-oxidizing activities of Mn oxides is also discussed.

Nature of Activated Manganese Oxide for Oxygen Evolution

Electrodeposited manganese oxide films (MnOx) are promising stable oxygen evolution catalysts. They are able to catalyze the oxygen evolution reaction in acidic solutions but with only modest activity when prepared by constant anodic potential deposition. We now show that the performance of these catalysts is improved when they are "activated" by potential cycling protocols, as measured by Tafel analysis (where lower slope is better): upon activation the Tafel slope decreases from ∼120 to ∼70 mV/decade in neutral conditions and from ∼650 to ∼90 mV/decade in acidic solutions. Electrochemical, spectroscopic, and structural methods were employed to study the activation process and support a mechanism where the original birnessite-like MnOx (δ-MnO2) undergoes a phase change, induced by comproportionation with cathodically generated Mn(OH)2, to a hausmannite-like intermediate (α-Mn3O4). Subsequent anodic conditioning from voltage cycling or water oxidation produces a disordered birnessite-like phase, which is highly active for oxygen evolution. At pH 2.5, the current density of activated MnOx (at an overpotential of 600 mV) is 2 orders of magnitude higher than that of the original MnOx and begins to approach that of Ru and Ir oxides in acid.

On the Origin of the Improvement of Electrodeposited MnOx Films in Water Oxidation Catalysis Induced by Heat Treatment

Manganese oxides (MnOx ) are considered to be promising catalysts for water oxidation. Building on our previous studies showing that the catalytic activity of MnOx films electrodeposited from aqueous electrolytes is improved by a simple heat treatment, we have explored the origin of the catalytic enhancement at an electronic level by X-ray absorption spectroscopy (XAS). The Mn L-edge XA spectra measured at various heating stages were fitted by linear combinations of the spectra of the well-defined manganese oxides-MnO, Mn3 O4 , Mn2 O3 , MnO2 and birnessite. This analysis identified two major manganese oxides, Mn3 O4 and birnessite, that constitute 97 % of the MnOx films. Moreover, the catalytic improvement on heat treatment at 90 °C is related to the conversion of a small amount of birnessite to the Mn3 O4 phase, accompanied by an irreversible dehydration process. Further dehydration at higher temperature (120 °C), however, leads to a poorer catalytic performance.

Nanolayered manganese oxide/C(60) composite: a good water-oxidizing catalyst for artificial photosynthetic systems

For the first time, we considered Mn oxide/C60 composites as water-oxidizing catalysts. The composites were synthesized by easy and simple procedures, and characterized by some methods. The water-oxidizing activities of these composites were also measured in the presence of cerium(iv) ammonium nitrate. We found that the nanolayered Mn oxide/C60 composites show promising activity toward water oxidation.

The role of nano-sized manganese oxides in the oxygen-evolution reactions by manganese complexes: towards a complete picture

Eighteen Mn complexes with N-donor and carboxylate ligands have been synthesized and characterized. Three Mn complexes among them are new and are reported for the first time. The reactions of oxygen evolution in the presence of oxone (2KHSO5·KHSO4·K2SO4) and cerium(iv) ammonium nitrate catalyzed by these complexes are studied and characterized by UV-visible spectroscopy, X-ray diffraction spectrometry, dynamic light scattering, Fourier transform infrared spectroscopy, electron paramagnetic resonance spectroscopy, transmission electron microscopy, scanning electron microscopy, membrane-inlet mass spectrometry and electrochemistry. Some of these complexes evolve oxygen in the presence of oxone as a primary oxidant. CO2 and MnO4(-) are other products of these reactions. Based on spectroscopic studies, the true catalysts for oxygen evolution in these reactions are different. We proposed that for the oxygen evolution reactions in the presence of oxone, the true catalysts are both high valent Mn complexes and Mn oxides, but for the reactions in the presence of cerium(iv) ammonium nitrate, the active catalyst is most probably a Mn oxide.

Nanostructured manganese oxide/carbon nanotubes, graphene and graphene oxide as water-oxidizing composites in artificial photosynthesis

Herein, we report on nano-sized Mn oxide/carbon nanotubes, graphene and graphene oxide as water-oxidizing compounds in artificial photosynthesis. The composites are synthesized by different and simple procedures and characterized by a number of methods. The water-oxidizing activities of these composites are also considered in the presence of cerium(IV) ammonium nitrate. Some composites are efficient Mn-based catalysts with TOF (mmol O2 per mol Mn per second) ~ 2.6.

Uncovering structure-activity relationships in manganese-oxide-based heterogeneous catalysts for efficient water oxidation

Artificial photosynthesis by harvesting solar light into chemical energy could solve the problems of energy conversion and storage in a sustainable way. In nature, CO2 and H2 O are transformed into carbohydrates by photosynthesis to store the solar energy in chemical bonds and water is oxidized to O2 in the oxygen-evolving center (OEC) of photosystem II (PS II). The OEC contains CaMn4 O5 cluster in which the metals are interconnected through oxido bridges. Inspired by biological systems, manganese-oxide-based catalysts have been synthesized and explored for water oxidation. Structural, functional modeling, and design of the materials have prevailed over the years to achieve an effective and stable catalyst system for water oxidation. Structural flexibility with eg(1) configuration of Mn(III) , mixed valency in manganese, and higher surface area are the main requirements to attain higher efficiency. This Minireview discusses the most recent progress in heterogeneous manganese-oxide-based catalysts for efficient chemical, photochemical, and electrochemical water oxidation as well as the structural requirements for the catalyst to perform actively.

Gold nanorods or nanoparticles deposited on layered manganese oxide: new findings

Our results show that nano-sized gold has no significant effect on the water-oxidation activity of the Mn oxide phase in the presence of Ce(iv).

Nano-sized Mn oxides on halloysite or high surface area montmorillonite as efficient catalysts for water oxidation with cerium(iv) ammonium nitrate: support from natural sources

We used halloysite, a nano-sized natural mineral and high surface area montmorillonite as supports for nano-sized Mn oxides to synthesize efficient water-oxidising catalysts.

Engineering Disorder at a Nanoscale: A Combined TEM and XAS Investigation of Amorphous versus Nanocrystalline Sodium Birnessite

The term amorphous metal oxide is becoming widely used in the catalysis community. The term is generally used when there are no apparent peaks in an X-ray diffraction pattern. However, the absence of such features in X-ray diffraction can mean that the material is either truly amorphous or that it is better described as nanocrystalline. By coprecipitating a sodium birnessite-like phase with and without phosphate (1.5 %), we are able to engineer two very similar but distinct materials – one that is nanocrystalline and the other that is amorphous. The two closely related phases were characterized with both Mn K-edge X-ray absorption spectroscopy and high-resolution transmission electron microscopy. These structural results were then correlated with catalytic and electrocatalytic activities for water oxidation catalysis. In this case, the amorphous phosphate-doped material was less catalytically active than the nanocrystalline material.

Heat treatment of electrodeposited NiO films for improved catalytic water oxidation

The heat treatment of electrodeposited nickel oxide (NiO) films showed remarkable improvements for catalytic water oxidation.

Understanding the role of gold nanoparticles in enhancing the catalytic activity of manganese oxides in water oxidation reactions

The Earth-abundant and inexpensive manganese oxides (MnOx) have emerged as an intriguing type of catalysts for the water oxidation reaction. However, the overall turnover frequencies of MnOx catalysts are still much lower than that of nanostructured IrO2 and RuO2 catalysts. Herein, we demonstrate that doping MnOx polymorphs with gold nanoparticles (AuNPs) can result in a strong enhancement of catalytic activity for the water oxidation reaction. It is observed that, for the first time, the catalytic activity of MnOx/AuNPs catalysts correlates strongly with the initial valence of the Mn centers. By promoting the formation of Mn(3+) species, a small amount of AuNPs (<5%) in α-MnO2/AuNP catalysts significantly improved the catalytic activity up to 8.2 times in the photochemical and 6 times in the electrochemical system, compared with the activity of pure α-MnO2.

A functionally stable manganese oxide oxygen evolution catalyst in acid

First-row metals have been a target for the development of oxygen evolution reaction (OER) catalysts because they comprise noncritical elements. We now report a comprehensive electrochemical characterization of manganese oxide (MnOx) over a wide pH range, and establish MnOx as a functionally stable OER catalyst owing to self-healing, is derived from MnOx redeposition that offsets catalyst dissolution during turnover. To study this process in detail, the oxygen evolution mechanism of MnOx was investigated electrokinetically over a pH range spanning acidic, neutral, and alkaline conditions. In the alkaline pH regime, a ∼60 mV/decade Tafel slope and inverse first-order dependence on proton concentration were observed, whereas the OER acidic pH regime exhibited a quasi-infinite Tafel slope and zeroth-order dependence on proton concentration. The results reflect two competing mechanisms: a one-electron one-proton PCET pathway that is dominant under alkaline conditions and a Mn(3+) disproportionation process, which predominates under acidic conditions. Reconciling the rate laws of these two OER pathways with that of MnOx electrodeposition elucidates the self-healing characteristics of these catalyst films. The intersection of the kinetic profile of deposition and that of water oxidation as a function of pH defines the region of kinetic stability for MnOx and importantly establishes that a non-noble metal oxide OER catalyst may be operated in acid by exploiting a self-healing process.