Elucidation of Surface Species through in Situ FTIR Spectroscopy of Carbon Dioxide Adsorption on Amine-Grafted SBA-15

Measuring and Modeling Water and Carbon Dioxide Adsorption on Amine Functionalized Alumina under Direct Air Capture Conditions

Water vapor is an unavoidable component of ambient air that sorbents designed for atmospheric CO2 capture must contend with. Amine functionalized sorbents often exhibit an enhancement of CO2 uptake in the presence of moisture through a variety of mechanisms, and in this work, we investigate the coadsorption of water and CO2 on amine functionalized alumina. Sorbent performance is examined under varying levels of humidity and temperature using three common measurement techniques: gravimetric, volumetric, and breakthrough methods. Our findings show that water increasingly enhances CO2 adsorption up to the monolayer saturation point of water, above which no further enhancement is observed. Competitive adsorption is observed primarily at low relative humidities, and a novel dual-site isotherm model is developed that successfully describes these behaviors. Additionally, this study highlights the unique advantages of each measurement technique for accurately characterizing sorbent performance under direct air capture (DAC) conditions. These insights contribute to the understanding and optimization of amine-based sorbents in DAC applications.

Nitrogen-Rich Conjugated Macrocycles: Synthesis, Conductivity, and Application in Electrochemical CO2 Capture

Here we report a series of nitrogen-rich conjugated macrocycles that mimic the structure and function of semiconducting 2D metal-organic and covalent organic frameworks while providing greater solution processability and surface tunability. Using a new tetraaminotriphenylene building block that is compatible with both coordination chemistry and dynamic covalent chemistry reactions, we have synthesized two distinct macrocyclic cores containing Ni-N and phenazine-based linkages, respectively. The fully conjugated macrocycle cores support strong interlayer stacking and accessible nanochannels. For the metal-organic macrocycles, good out-of-plane charge transport is preserved, with pressed pellet conductivities of 10-3 S/cm for the nickel variants. Finally, using electrochemically mediated CO2 capture as an example, we illustrate how colloidal phenazine-based organic macrocycles improve electrical contact and active site electrochemical accessibility relative to bulk covalent organic framework powders. Together, these results highlight how simple macrocycles can enable new synthetic directions as well as new applications by combining the properties of crystalline porous frameworks, the processability of nanomaterials, and the precision of molecular synthesis.

Development of Amino-Functionalized Silica by Co-condensation and Alkylation for Direct Air Capture

CO2 chemisorption using amine-based sorbents is one of the most effective techniques for carbon capture and storage. Solid CO2 sorbents with amines immobilized on their surface have been attracting attention due to the easy collection of sorbents and reusability. In this study, we developed a solid CO2 adsorbent by co-condensation of a silanizing reagent having a chloroalkyl group and tetraethyl ethoxysilane, followed by alkylation of the chloroalkyl group with diamine. The fabricated amine-immobilized silica with a high density of amino groups on its surface achieved the chemical adsorption of 400 ppm of CO2 with 4.3 wtCO2 % loading, CO2 release upon heating at 80 °C, and reusability for adsorption and desorption cycles with high amine utilization efficiency (0.20 molCO2 /mol-N). This surface modification method is applicable to various amines bearing more than two amino functional groups, enabling the development of solid CO2 sorbents for the selective capture of low-concentration CO2 directly from the air.

Feasibility and Effectivity of an Amine-Grafted Alumina Adsorbent for Direct Air Capture

Direct air capture (DAC) has been identified as a necessary negative emission technology (NET) to solve global warming. DAC methods have been divided into two major types: solvent absorption and sorbent adsorption. Aqueous amine absorption is the major method in postcombustion carbon capture, not in DAC because contactors blow large volumes of air over the solvent, which results in high evaporation of solvents. Solid amine adsorption has been one of the primary methods of DAC due to its low volatility of amine. Therefore, the development of DAC adsorbents is the key to improve CO2 capture efficiency. Nowadays, the research on adsorbents mainly focuses on amine impregnation and grafting. The grafting adsorbents generally have better stability than impregnation adsorbents. Silica is the most common support material for amine-grafted adsorbents. Nonetheless, silica has some defects, such as poor hydrothermal stability, which limits its employment. Alumina is a promising support material with excellent hydrothermal stability, but studies on amine-grafted alumina are still scarce. Herein, a method of 3-[2-(2-aminoethylamino)ethylamino] propyltrimethoxysilane (TRI) grafting onto γ-alumina is presented. The results of this paper suggest that alumina is a potential support material for amine grafting. The CO2 adsorption capacity of the adsorbent is 0.39 mmol g-1 at 400 ppm and 25 °C. The amine-grafted alumina has excellent thermal stability than the amine-impregnation silica adsorbent. Besides, the adsorbent exhibits stable performance during cycles, with the working capacity maintained at 83% of that of the first cycle after 60 cycles. Water adsorption capacity and selectivity indicate that TRI-Al2O3 has good selectivity at high relative humidity. These findings make amine-grafted alumina a promising DAC adsorbent.

Competing Kinetic Consequences of CO2 on the Oxidative Degradation of Branched Poly(ethylenimine)

Amine-functionalized porous solid materials are effective sorbents for direct air capture (DAC) of CO2. However, they are prone to oxidative degradation in service, increasing the materials cost for widespread implementation. While the identification of oxidation products has given insights into degradation pathways, the roles of some species, like CO2 itself, remain unresolved, with conflicting information in the literature. Here, we investigate the impact of CO2 on the oxidative degradation of poly(ethylenimine)-alumina (PEI/Al2O3) sorbents under conditions encompassing a wide range of CO2-air mixture compositions and temperatures relevant to DAC conditions, thereby reconciling the conflicting data in the literature. Degradation profiles characterized by thermogravimetric analysis, in situ ATR-FTIR, and CO2 capacity measurements reveal nonmonotonic effects of CO2 concentrations and temperatures on oxidation kinetics. Specifically, 0.04% CO2 accelerates PEI/Al2O3 oxidation more at low temperatures (<90 °C) compared to 1% and 5% CO2, but this trend reverses at high temperatures (>90 °C). First-principles metadynamics, machine learning accelerated molecular dynamics simulations, and 1H relaxometry experiments show that chemisorbed CO2 acid-catalyzes critical oxidation reactions, while extensive CO2 uptake reduces PEI branch mobility, slowing radical propagation. These contrasting kinetic effects of CO2 explain the complex degradation profiles observed in this work and in prior literature. Collectively, this work highlights the importance of considering atmospheric components in the design of DAC sorbents and processes. Additionally, it identifies the unconstrained branch mobility and local acid environment as two of the major culprits in the oxidation of amine-based sorbents, suggesting potential strategies to mitigate sorbent degradation.

Improving CO2 adsorption efficiency of an amine-modified MOF-808 through the synthesis of its graphene oxide composites

This research developed a novel composite of MOF-NH2 and graphene oxide (GO) for enhanced CO2 capture. Employing the response surface methodology-central composite design (RSM-CCD) for experiments design, various MOF-NH2/GO samples with GO loadings from 0 to 30 wt% were synthesized. The results of SEM, XRD, EDS, and BET analysis revealed that the materials maintained their MOF crystal structure, confirmed by X-ray diffraction, and exhibited unique texture, high porosity, and oxygen-enriched surface chemistry. The influence of temperature (25-65 °C) and pressure (1-9 bar) on CO2 adsorption capacity was assessed using a volumetric adsorption system. Optimum conditions were obtained at weight percent of 22.6 wt% GO, temperature of 25 °C, and pressure of 9 bar with maximum adsorption capacity of 303.61 mg/g. The incorporation of amino groups enhanced the CO2 adsorption capacity. Isotherm and kinetic analyses indicated that Freundlich and Fractional-order models best described CO2 adsorption behavior. Thermodynamic analysis showed the process was exothermic, spontaneous, and physical, with enthalpy changes of - 16.905 kJ/mol, entropy changes of - 0.030 kJ/mol K, and Gibs changes energy of - 7.904 kJ/mol. Mass transfer diffusion coefficients increased with higher GO loadings. Regenerability tests demonstrated high performance and resilience, with only a 5.79% decrease in efficiency after fifteen cycles. These findings suggest significant potential for these composites in CO2 capture technologies.

Improving the direct air capture capacity of grafted amines via thermal treatment

This study investigates the effects of elevated temperature thermal treatments on the direct air capture of CO2 by aminosilane-grafted SBA-15 silica sorbents. Exposing samples to high temperatures (200-250 °C compared to 80-120 °C) in an inert environment resulted in improved CO2 capacity (5-21%) that was sustained over multiple adsorption/desorption cycles.

Efficient dissolution of cellulose in slow-cooling alkaline systems and interacting modes between alkali and urea at the molecular level

The dissolution of microcrystalline cellulose (MCC) in a urea-NaOH system is beneficial for its mechanical processing. The apparent MCC solubility was greatly improved to 14 wt% under a slow-cooling condition with a cooling rate of -0.3 °C/min. The cooling curve or thermal history played a crucial role in the dissolution process. An exotherm (-54.7 ± 3 J/g MCC) was detected by DSC only under the slow-cooling condition, and the cryogenic dissolution of MCC was attributed to the exothermic interaction between MCC and solvent. More importantly, the low cooling rate promoted the dissolution of MCC by providing enough time for the diffusion of OH- and urea into MCC granules at higher temperatures. The Raman spectral data showed that the intramolecularly and intermolecularly hydrogen bonds in cellulose were cleaved by NaOH and urea, respectively. XPS and solid-state 13C NMR results showed that hydrogen bonds were generated after dissolution, and a dual-hydrogen-bond binding mode between urea and cellulose was confirmed by DFT calculations. Both the decrease of enthalpy and increase of entropy dominated the spontaneity of MCC dissolution, and that is the reason for the indispensability of cryogenic environment. The high apparent solubility of MCC in the slow-cooling process and the dissolution mechanism are beneficial for the studies on cellulose modification and mechanical processing.

Contributions of CO2, O2, and H2O to the Oxidative Stability of Solid Amine Direct Air Capture Sorbents at Intermediate Temperature

Aminopolymer-based sorbents are preferred materials for extraction of CO2 from ambient air [direct air capture (DAC) of CO2] owing to their high CO2 adsorption capacity and selectivity at ultra-dilute conditions. While those adsorptive properties are important, the stability of a sorbent is a key element in developing high-performing, cost-effective, and long-lasting sorbents that can be deployed at scale. Along with process upsets, environmental components such as CO2, O2, and H2O may contribute to long-term sorbent instability. As such, unraveling the complex effects of such atmospheric components on the sorbent lifetime as they appear in the environment is a critical step to understanding sorbent deactivation mechanisms and designing more effective sorbents and processes. Here, a poly(ethylenimine) (PEI)/Al2O3 sorbent is assessed over continuous and cyclic dry and humid conditions to determine the effect of the copresence of CO2 and O2 on stability at an intermediate temperature of 70 °C. Thermogravimetric and elemental analyses in combination with in situ horizontal attenuated total reflection infrared (HATR-IR) spectroscopy are performed to measure the extent of deactivation, elemental content, and molecular level changes in the sorbent due to deactivation. The thermal/thermogravimetric analysis results reveal that incorporating CO2 with O2 accelerates sorbent deactivation using these sorbents in dry and humid conditions compared to that using CO2-free air in similar conditions. The in situ HATR-IR spectroscopy results of PEI/Al2O3 sorbent deactivation under a CO2-air environment show the formation of primary amine species in higher quantity (compared to that in conditions without O2 or CO2), which arises due to the C-N bond cleavage at secondary amines due to oxidative degradation. We hypothesize that the formation of bound CO2 species such as carbamic acids catalyzes C-N cleavage reactions in the oxidative degradation pathway by shuttling protons, resulting in a low activation energy barrier for degradation, as probed by metadynamics simulations. In the cyclic experiment after 30 cycles, results show a gradual loss in stability (dry: 29%, humid: 52%) under CO2-containing air (0.04% CO2/21% O2 balance N2). However, the loss in capacity during cyclic studies is significantly less than that during continuous deactivation, as expected.

Amine functionalized benzene based hypercrosslinked polymer as an adsorbent for CO2/N2 adsorption

In this work, benzene based hypercrosslinked polymer (HCP) as an adsorbent was modified using amine group to enhance CO₂ uptake capability and selectivity. Based on BET analysis result, the HCP and the modified HCP provide surface area of 806 (m² g^-1) and micropore volume of 453 (m² g^-1) and 0.19 (cm³ g^-1) and 0.14 (cm³ g^-1), respectively. The CO₂ and N₂ gases adsorption were performed in a laboratory scale reactor at a temperature between 298 and 328 K and pressure up to 9 bar. The experimental data were evaluated using isotherm, kinetic and thermodynamic models to identify the absorbent behavior. The maximum CO₂ adsorption capacity at 298 K and 9 bar was obtained 301.67 (mg g^-1) for HCP and 414.41 (mg g^-1) for amine modified HCP. The CO₂ adsorption thermodynamic parameters assessment including enthalpy changes, entropy changes, and Gibbs free energy changes at 298 K were resulted - 14.852 (kJ mol^-1), - 0.024 (kJ mol^-1 K^-1), - 7.597 (kJ mol^-1) for HCP and - 17.498 (kJ mol^-1), - 0.029(kJ mol^-1 K^-1), - 8.9 (kJ mol^-1) for amine functionalized HCP, respectively. Finally, the selectivity of the samples were calculated at a CO₂/N₂ composition of 15:85 (v/v) and 43% enhancement in adsorption selectivity at 298 K was obtained for amine modified HCP.

Mixed Diethanolamine and Polyethyleneimine with Enhanced CO2 Capture Capacity from Air

Supported polyethyleneimine (PEI) adsorbent is one of the most promising commercial direct air capture (DAC) adsorbents with a long research history since 2002. Although great efforts have been input, there are still limited improvements for this material in its CO₂ capacity and adsorption kinetics under ultradilute conditions. Supported PEI also suffers significantly reduced adsorption capacities when working at sub-ambient temperatures. This study reports that mixing diethanolamine (DEA) into supported PEI can increase 46% and 176% of pseudoequilibrium CO₂ capacities at DAC conditions compared to the supported PEI and DEA, respectively. The mixed DEA/PEI functionalized adsorbents maintain the adsorption capacity at sub-ambient temperatures of -5 to 25 °C. In comparison, a 55% reduction of CO₂ capacity is observed for supported PEI when the operating temperature decreases from 25 to -5 °C. In addition, the supported mixed DEA/PEI with a ratio of 1:1 also shows fast desorption kinetics at temperatures as low as 70 °C, resulting in maintaining high thermal and chemical stability over 50 DAC cycles with a high average CO₂ working capacity of 1.29 mmol g^-1 . These findings suggest that the concept of "mixed amine", widely studied in the solvent system, is also practical to supported amine for DAC applications.

Selective Oxidation of Triethylamine Catalyzed by Mn-Ce/ZSM-5

The selective catalytic oxidation (SCO) of triethylamine (TEA) to harmless nitrogen (N₂), carbon dioxide (CO₂), and water (H₂O) is of green elimination technology. In this paper, Mn-Ce/ZSM-5 with different proportions of MnO_x/CeO_x were studied for the selective catalytic combustion of TEA. The catalysts were characterized by XRD, BET, H₂-TPR, XPS, and NH₃-TPD and their catalytic activities were analyzed. The results showed that MnO_x was the main active component. The addition of a small amount of CeO_x promotes the generation of high-valence Mn ions, which reduces the reduction temperature of the catalyst and increases the redox capacity of the catalyst. In addition, the synergistic effect between CeO_x and MnO_x significantly improves the mobility of reactive oxygen species on the catalyst, thus improving the catalytic performance of the catalyst. The catalytic oxidation performance of TEA over 15Mn5Ce/ZSM-5 is the highest. TEA can be completely converted at 220 °C, and the selectivity for N₂ is up to 80%. The reaction mechanism was studied by in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS).

Metal-Organic Framework with a Redox-Active Bridge Enables Electrochemically Highly Selective Removal of Arsenic from Water

Selective removal of trace, highly toxic arsenic from water is vital to ensure an adequate and safe drinking water supply for over 230 million people around the globe affected by arsenic contamination. Here, we developed an Fe-based metal-organic framework (MOF) with a ferrocene (Fc) redox-active bridge (termed Fe-MIL-88B-Fc) for the highly selective removal of As(III) from water. At a cell voltage of 1.2 V, Fe-MIL-88B-Fc can selectively separate and oxidize As(III) into the less harmful As(V) state in the presence of a 100- to 1250-fold excess of competing electrolyte, with an uptake capacity of >110 mg-As g^-1 adsorbent. The high affinity between the uncharged As(III) and the μ₃-O trimer (-36.55 kcal mol^-1) in Fe-MIL-88B-Fc and the electron transfer between As(III) and redox-active Fc⁺ synergistically govern the selective capture and conversion of arsenic. The Fe-based MOF demonstrates high selectivity and capacity to remediate arsenic-contaminated natural water at a low energy cost (0.025 kWh m^-3). This study provides valuable guidance for the tailoring of effective and robust electrodes, which can lead to a wider application of electrochemical separation technologies.

Understanding the intermediates and carbon dioxide adsorption of potassium chloride-incorporated graphitic carbon nitride with tailoring melamine and urea as precursors

In this study, we demonstrated the synthesis of potassium chloride (KCl)-incorporated graphitic carbon nitride, (g-C₃N₄, CN) with varying amounts of N-vacancies and pyridinic-N as well as enhanced Lewis basicity, via a single-step thermal polymerization by tailoring the precursors of melamine and urea for carbon oxide (CO₂) capture. Melamine, as a precursor, undergoes a phase transformation into melam and triazine-rich g-C₃N₄, whereas the addition of urea polymerizes the mixture to form melem and heptazine-rich g-C₃N₄ (CN11). Owing to the abundance of pyridinic-N and the high surface area, CN11 adsorbed higher amounts of CO₂ (44.52 μmol m^-2 at 25 °C and 1 bar of CO₂) than those reported for other template-free carbon materials. Spectroscopic analysis revealed that the enhanced CO₂ adsorption is due to the presence of pyridinic-N and Lewis basic sites on the surface. The intermediates of CO₂adsorption, including carbonate and bicarbonate species, attached to the CN samples were identified using in-situ Fourier-transform infrared spectroscopy (FTIR). This work provides insights into the mechanism of CO₂ adsorption by comparing the structural features of the synthesized KCl-incorporated g-C₃N₄ samples_. CN11, with an excellent CO₂ uptake capacity, is viewed as a promising candidate for CO₂ capture and storage.

Review on CO2 Capture Using Amine-Functionalized Materials

CO₂ capture from industry sectors or directly from the atmosphere is drawing much attention on a global scale because of the drastic changes in the climate and ecosystem which pose a potential threat to human health and life on Earth. In the past decades, CO₂ capture technology relied on classical liquid amine scrubbing. Due to its high energy consumption and corrosive property, CO₂ capture using solid materials has recently come under the spotlight. A variety of porous solid materials were reported such as zeolites and metal-organic frameworks. However, amine-functionalized porous materials outperform all others in terms of CO₂ adsorption capacity and regeneration efficiency. This review provides a brief overview of CO₂ capture by various amines and mechanistic aspects for newcomers entering into this field. This review also covers a state-of-the-art regeneration method, visible/UV light-triggered CO₂ desorption at room temperature. In the last section, the current issues and future perspectives are summarized.

Recent advances in direct air capture by adsorption

Significant progress has been made in direct air capture (DAC) in recent years. Evidence suggests that the large-scale deployment of DAC by adsorption would be technically feasible for gigatons of CO₂ capture annually. However, great efforts in adsorption-based DAC technologies are still required. This review provides an exhaustive description of materials development, adsorbent shaping, in situ characterization, adsorption mechanism simulation, process design, system integration, and techno-economic analysis of adsorption-based DAC over the past five years; and in terms of adsorbent development, affordable DAC adsorbents such as amine-containing porous materials with large CO₂ adsorption capacities, fast kinetics, high selectivity, and long-term stability under ultra-low CO₂ concentration and humid conditions. It is also critically important to develop efficient DAC adsorptive processes. Research and development in structured adsorbents that operate at low-temperature with excellent CO₂ adsorption capacities and kinetics, novel gas-solid contactors with low heat and mass transfer resistances, and energy-efficient regeneration methods using heat, vacuum, and steam purge is needed to commercialize adsorption-based DAC. The synergy between DAC and carbon capture technologies for point sources can help in mitigating climate change effects in the long-term. Further investigations into DAC applications in the aviation, agriculture, energy, and chemical industries are required as well. This work benefits researchers concerned about global energy and environmental issues, and delivers perspective views for further deployment of negative-emission technologies.

Atmospheric-Pressure Conversion of CO2 to Cyclic Carbonates over Constrained Dinuclear Iron Catalysts

The conversion of CO₂ and epoxides to cyclic carbonates over a silica-supported di-iron(III) complex having a reduced Robson macrocycle ligand system is shown to proceed at 1 atm and 80 °C, exclusively producing the cis-cyclohexene carbonate from cyclohexene oxide. We examine the effect of immobilization configuration to show that the complex grafted in a semirigid configuration catalytically outperforms the rigid, flexible configurations and even the homogeneous counterparts. Using the semirigid catalyst, we are able to obtain a TON of up to 800 and a TOF of up to 37 h^-1 under 1 atm CO₂. The catalyst is shown to be recyclable with only minor leaching and no change to product selectivity. We further examine a range of epoxides with varying electron-withdrawing/donating properties. This work highlights the benefit arising from the constraining effect of a solid surface, akin to the role of hydrogen bonds in enzyme catalysts, and the importance of correctly balancing it.

CO2 adsorption enhancement over Al/C-doped h-BN: A DFT study

Reducing energy barriers of CO₂ being chemisorbed on hexagonal boron nitride (h-BN) is a kernel step to efficiently and massively capture CO₂. In this study, aluminum/carbon (Al/C) atoms are used as dopants to alter surface potential fields of h-BN, which aims at lowering energy barriers of adsorption processes. Through theoretical calculations, direct-adsorption structures/properties of CO₂, joint-adsorption structures/properties of CO₂/H₂O, transition state (TS) energy barriers, effects of temperatures on adsorption energies/TS energy barriers and changes of reaction rate constants over different adsorbents are investigated in detail in order to reveal how doping of Al/C atoms promotes CO₂ adsorption strength over doped h-BN. According to DFT calculation results, the average adsorption energy of CO₂ being directly adsorbed on Al/C-doped h-BN arrives at -59.43 kJ/mol, which is about 5 times as big as that over pure h-BN. As to the average adsorption energy of CO₂/H₂O and relevant TS energy barrier, they are modified to -118.89 kJ/mol and 40.23 kJ/mol over Al/C-doped h-BN in contrast with -33.91 kJ/mol and 1695.11 kJ/mol over pure h-BN, respectively. What is more, based on thermodynamic analyses and reaction dynamics, the average desorption temperatures of CO₂(/H₂O) are promoted over doped h-BN and the temperature power exponent is negatively correlated with the activation energy in the Arrhenius equation form. The complete understanding of this study would supply crucial information for applying Al/C-doped h-BN to effectively capturing CO₂ in real industries.

Predicting the Mechanism and Products of CO2 Capture by Amines in the Presence of H2O

An extensive correlated molecular orbital theory study of the reactions of CO₂ with a range of substituted amines and H₂O in the gas phase and aqueous solution was performed at the G3(MP2) level with a self-consistent reaction field approach. The G3(MP2) calculations were benchmarked at the CCSD(T)/CBS level for NH₃ reactions. A catalytic NH₃ reduces the energy barrier more than a catalytic H₂O for the formation of H₂NCOOH and H₂CO₃. In aqueous solution, the barriers to form both H₂NCOOH and H₂CO₃ are reduced, with HCO₃^- formation possible with one amine present and H₂NCOO^- formation possible only with two amines. Further reactions of H₂NCOOH to form HNCO and urea via the Bazarov reaction have high barriers and are unlikely in both the gas phase and aqueous solution. Reaction coordinates for CH₃NH₂, CH₃CH₂NH₂, (CH₃)₂NH, CH₃CH₂CH₂NH₂, (CH₃)₃N, and DMAP were also calculated. The barrier for proton transfer correlates with amine basicity for alkylammonium carbamate (ΔG^‡_aq < 15 kcal/mol) and alkylammonium bicarbonate (ΔG^‡_aq < 30 kcal/mol) formation. In aqueous solution, carbamic acids, carbamates, and bicarbonates can all form in small amounts with ammonium carbamates dominating for primary and secondary alkylamines. These results have implications for CO₂ capture by amines in both the gas phase and aqueous solution as well as in the solid state, if enough water is present.

Porous materials for carbon dioxide separations

Global investment in counteracting climate change has galvanized increasing interest in carbon capture and sequestration (CCS) as a versatile emissions mitigation technology. As decarbonization efforts accelerate, CCS can target the emissions of large point-source emitters, such as coal- or natural gas-fired power plants, while also supporting the production of renewable or low-carbon fuels. Furthermore, CCS can enable decarbonization of difficult-to-abate industrial processes and can support net CO₂ removal from the atmosphere through bioenergy coupled with CCS or direct air capture. Here we review the development of porous materials as next-generation sorbents for CO₂ capture applications. We focus on stream- and sector-specific challenges while highlighting case studies within the context of the rapidly shifting energy landscape. We conclude with a discussion of key needs from the materials community to expand deployment of carbon capture technologies.

Understanding the Effect of Water on CO2 Adsorption

Carbon capture from large sources and ambient air is one of the most promising strategies to curb the deleterious effect of greenhouse gases. Among different technologies, CO₂ adsorption has drawn widespread attention mostly because of its low energy requirements. Considering that water vapor is a ubiquitous component in air and almost all CO₂-rich industrial gas streams, understanding its impact on CO₂ adsorption is of critical importance. Owing to the large diversity of adsorbents, water plays many different roles from a severe inhibitor of CO₂ adsorption to an excellent promoter. Water may also increase the rate of CO₂ capture or have the opposite effect. In the presence of amine-containing adsorbents, water is even necessary for their long-term stability. The current contribution is a comprehensive review of the effects of water whether in the gas feed or as adsorbent moisture on CO₂ adsorption. For convenience, we discuss the effect of water vapor on CO₂ adsorption over four broadly defined groups of materials separately, namely (i) physical adsorbents, including carbons, zeolites and MOFs, (ii) amine-functionalized adsorbents, and (iii) reactive adsorbents, including metal carbonates and oxides. For each category, the effects of humidity level on CO₂ uptake, selectivity, and adsorption kinetics under different operational conditions are discussed. Whenever possible, findings from different sources are compared, paying particular attention to both similarities and inconsistencies. For completeness, the effect of water on membrane CO₂ separation is also discussed, albeit briefly.

Mussel Inspired Chemistry and Bacteria Derived Polymers for Oral Mucosal Adhesion and Drug Delivery

Ulceration of the oral mucosa is common, can arise at any age and as a consequence of the pain lessens enjoyment and quality of life. Current treatment options often involve the use of topical corticosteroids with poor drug delivery systems and inadequate contact time. In order to achieve local controlled delivery to the lesion with optimal adhesion, we utilized a simple polydopamine chemistry technique inspired by mussels to replicate their adhesive functionality. This was coupled with production of a group of naturally produced polymers, known as polyhydroxyalkanoates (PHA) as the delivery system. Initial work focused on the synthesis of PHA using Pseudomonas mendocina CH50; once synthesized and extracted from the bacteria, the PHAs were solvent processed into films. Polydopamine coating was subsequently achieved by immersing the solvent cast film in a polymerized dopamine solution. Fourier Transform Infrared Spectroscopy (FTIR) spectroscopy confirmed functionalization of the PHA films via the presence of amine groups. Further characterization of the samples was carried out via surface energy measurements and Scanning Electron Microscopy (SEM) micrographs for surface topography. An adhesion test via reverse compression testing directly assessed adhesive properties and revealed an increase in polydopamine coated samples. To further identify the effect of surface coating, LIVE/DEAD imaging and Alamar Blue metabolic activity evaluated attachment and proliferation of fibroblasts on the biofilm surfaces, with higher cell growth in favor of the coated samples. Finally, in vivo biocompatibility was investigated in a rat model where the polydopamine coated PHA showed less inflammatory response over time compared to uncoated samples with sign of neovascularization. In conclusion, this simple mussel inspired polydopamine chemistry introduces a step change in bio-surface functionalization and holds great promise for the treatment of oral conditions.

Unravelling moisture-induced CO2 chemisorption mechanisms in amine-modified sorbents at the molecular scale

This work entails a comprehensive solid-state NMR and computational study of the influence of water and CO₂ partial pressures on the CO₂-adducts formed in amine-grafted silica sorbents. Our approach provides atomic level insights on hypothesised mechanisms for CO₂ capture under dry and wet conditions in a tightly controlled atmosphere. The method used for sample preparation avoids the use of liquid water slurries, as performed in previous studies, enabling a molecular level understanding, by NMR, of the influence of controlled amounts of water vapor (down to ca. 0.7 kPa) in CO₂ chemisorption processes. Details on the formation mechanism of moisture-induced CO₂ species are provided aiming to study CO₂ : H₂O binary mixtures in amine-grafted silica sorbents. The interconversion between distinct chemisorbed CO₂ species was quantitatively monitored by NMR under wet and dry conditions in silica sorbents grafted with amines possessing distinct bulkiness (primary and tertiary). Particular attention was given to two distinct carbonyl environments resonating at δ _C ∼161 and 155 ppm, as their presence and relative intensities are greatly affected by moisture depending on the experimental conditions. 1D and 2D NMR spectral assignments of both these ¹³C resonances were assisted by density functional theory calculations of ¹H and ¹³C chemical shifts on model structures of alkylamines grafted onto the silica surface that validated various hydrogen-bonded CO₂ species that may occur upon formation of bicarbonate, carbamic acid and alkylammonium carbamate ion pairs. Water is a key component in flue gas streams, playing a major role in CO₂ speciation, and this work extends the current knowledge on chemisorbed CO₂ structures and their stabilities under dry/wet conditions, on amine-modified solid surfaces.

Analysis of Solid-State Reaction Mechanisms with Two-Dimensional Fourier Transform Infrared Correlation Spectroscopy

The utility of two-dimensional generalized correlation spectroscopy (2D-COS) for tracking complex solid-state reactions is demonstrated using infrared spectra acquired during a photochemically induced decomposition reaction. Eleven different thin films, consisting of six monometallic and five bimetallic 2-ethylhexanoate complexes, were tracked as a function of photolysis time. Overlapping peaks in the infrared fingerprint region are readily discriminated using 2D-COS, enabling individual vibrational components to be used to distinguish whether carboxylate ligands are free/ionic or bound in a chelating, bridging, or monodentate fashion. This classification enables the decomposition mechanism to be tracked for all 11 samples, revealing that ligands bound in monodentate and bridging fashions are first converted to chelates before being lost as volatile products for all samples. The magnitude of the measured first-order rate constants for loss of chelated ligands is found to correlate linearly to the asymmetric stretching frequency of monodentate ligands but exhibits a V shape when plotted against the electronegativity of the metal center. We propose that loss of chelated ligands proceeds via C-O scission for highly electronegative transition metals but M-O scission for transition metals with low electronegativity. These results establish 2D-COS as a powerful tool to deconvolute and correlate individual components, enabling mechanistic analysis of complex chemical reactions.

Great Location: About Effects of Surface Bound Neighboring Groups for Passive and Active Fine-Tuning of CO2 Adsorption Properties in Model Carbon Capture Materials

Improved carbon capture materials are crucial for managing the CO2 level in the atmosphere. The past focus was on increasing adsorption capacities. It is widely known that controlling the heat of adsorption (ΔHads ) is equally important. If it is too low, CO2 uptake takes place at unfavorable conditions and with insufficient selectivity. If it is too high, chemisorption occurs, and the materials can hardly be regenerated. The conventional approach for influencing ΔHads is the modification of the adsorbing center. This paper proposes an alternative strategy. The hypothesis is that fine-tuning of the molecular environment around the adsorbing center is a powerful tool for the adjustment of CO2 -binding properties. Via click chemistry, any desired neighboring group (NG) can be incorporated on the surfaces of the nanoporous organosilica model materials. Passive NGs induce a change in the polarity of the surface, whereas active NGs are capable of direct interaction with the active center/CO2 pair. The effects on ΔHads and on the selectivity are studied. A situation can be realized which resembles frustrated Lewis acid-base pairs, and the investigation of the binding-species by solid-state NMR indicates that the push-pull effects could play an essential role not only in CO2 adsorption but also in its activation.

High molecular weight polyethylenimine encapsulated into a porous polymer monolithic by one-step polymerization for CO2 capture

A low-cost porous polymer monolithic with a well-interconnected 3D structure and high amino efficiency for CO₂ capture.

A Unified Approach to CO2-Amine Reaction Mechanisms

A unified CO₂-amine reaction mechanism applicable to absorption in aqueous or nonaqueous solutions and to adsorption on immobilized amines in the presence of both dry and humid conditions is proposed. Key findings supported by theoretical calculations and experimental evidence are as follows: (1) The formation of the 1,3-zwitterion, RH₂N⁺-COO^-, is highly unlikely because not only the associated four-membered mechanism has a high energy barrier, but also it is not consistent with the orbital symmetry requirements for chemical reactions. (2) The nucleophilic attack of CO₂ by amines requires the catalytic assistance of a Bro̷nsted base through a six-membered mechanism to achieve proton transfer/exchange. An important consequence of this concerted mechanism is that the N and H atoms added to the C=O double bond do not originate from a single amine group. Using ethylenediamine for illustration, detailed description of the reaction pathway is reported using the reactive internal reaction coordinate as a new tool to visualize the reaction path. (3) In the presence of protic amines, the formation of ammonium bicarbonate/carbonate does not take place through the widely accepted hydration of carbamate/carbamic acid. Instead, water behaves as a nucleophile that attacks CO₂ with catalytic assistance by amine groups, and carbamate/carbamic acid decomposes back to amine and CO₂. (4) Generalization of the catalytic assistance concept to any Bro̷nsted base established through theoretical calculations was supported by infrared measurements. A unified six-membered mechanism was proposed to describe all possible interactions of CO₂ with amines and water, each playing the role of a nucleophile and/or Bro̷nsted base, depending on the actual conditions.

Challenges and opportunities for adsorption-based CO2 capture from natural gas combined cycle emissions

In recent years, the power sector has shown a growing reliance on natural gas, a cleaner-burning fuel than coal that emits approximately half as much CO2 per kWh of energy produced. This rapid growth in the consumption of natural gas has led to increased CO2 emissions from gas-fired power plants. To limit the contribution of fossil fuel combustion to atmospheric CO2 levels, carbon capture and sequestration has been proposed as a potential emission mitigation strategy. However, despite extensive exploration of solid adsorbents for CO2 capture, few studies have examined the performance of adsorbents in post-combustion capture processes specific to natural gas flue emissions. In this perspective, we emphasize the importance of considering gas-fired power plants alongside coal-fired plants in future analyses of carbon capture materials. We address specific challenges and opportunities related to adsorptive carbon capture from the emissions of gas-fired plants and discuss several promising candidate materials. Finally, we suggest experiments to determine the viability of new CO2 capture materials for this separation. This broadening in the scope of current carbon capture research is urgently needed to accelerate the deployment of transformational carbon capture technologies.

Unravelling the Structure of Chemisorbed CO2 Species in Mesoporous Aminosilicas: A Critical Survey

Chemisorbent materials, based on porous aminosilicas, are among the most promising adsorbents for direct air capture applications, one of the key technologies to mitigate carbon emissions. Herein, a critical survey of all reported chemisorbed CO₂ species, which may form in aminosilica surfaces, is performed by revisiting and providing new experimental proofs of assignment of the distinct CO₂ species reported thus far in the literature, highlighting controversial assignments regarding the existence of chemisorbed CO₂ species still under debate. Models of carbamic acid, alkylammonium carbamate with different conformations and hydrogen bonding arrangements were ascertained using density functional theory (DFT) methods, mainly through the comparison of the experimental ¹³C and ¹⁵N NMR chemical shifts with those obtained computationally. CO₂ models with variable number of amines and silanol groups were also evaluated to explain the effect of amine aggregation in CO₂ speciation under confinement. In addition, other less commonly studied chemisorbed CO₂ species (e.g., alkylammonium bicarbonate, ditethered carbamic acid and silylpropylcarbamate), largely due to the difficulty in obtaining spectroscopic identification for those, have also been investigated in great detail. The existence of either neutral or charged (alkylammonium siloxides) amine groups, prior to CO₂ adsorption, is also addressed. This work extends the molecular-level understanding of chemisorbed CO₂ species in amine-oxide hybrid surfaces showing the benefit of integrating spectroscopy and theoretical approaches.