Towards Versatile and Sustainable Hydrogen Production through Electrocatalytic Water Splitting: Electrolyte Engineering

Functions of metal-phenolic networks and polyphenol derivatives in photo(electro)catalysis

Phenolic compounds are ubiquitous in nature because of their unique physical and chemical properties and wide applications, which have received extensive research attention. Phenolic compounds represented by tannic acid (TA) play an important role at the nanoscale. TA with a polyphenol hydroxyl structure can chemically react with organic or inorganic materials, among which metal-phenolic networks (MPNs) formed by coordination with metal ions and polyphenol derivatives formed by interactions with organic matter, exhibit specific properties and functions, and play key roles in photo(electro)catalysis. In this paper, we first introduce the fundamental properties of TA, then summarize the factors influencing the properties of MPNs and structural transformation of polyphenol-derived materials. Subsequently, the functions of MPNs and polyphenol derivatives in photo(electro)catalysis reactions are summarized, encompassing improving interfacial charge carrier separation, accelerating surface reaction kinetics, and enhancing light absorption. Finally, this article provides a comprehensive overview of the challenges and outlook associated with MPNs. Additionally, it presents novel insights into their stability, mechanistic analysis, synthesis, and applications in photo(electro)catalysis.

Acidification-based direct electrolysis of treated wastewater for hydrogen production and water reuse

This report describes the direct electrolysis of treated wastewater (as a catholyte) to produce hydrogen and potentially reuse the water. To suppress the negative shift of the cathodic potential due to an increase in pH by the hydrogen evolution reaction (HER), the treated wastewater is acidified using the synergetic effect of protons generated from the bipolar membrane and inorganic precipitation occurred at the surface of the cathode during the HER. Natural seawater, as an accessible source for Mg2+ ions, was added to the treated wastewater because the concentration of Mg2+ ions contained in the original wastewater was too low for acidification to occur. The mixture of treated wastewater with seawater was acidified to pH 3, allowing the initial cathode potential to be maintained for more than 100 h. The amount of inorganic precipitates formed on the cathode surface is greater than that in the control case (adding 0.5 M NaCl instead of seawater) but does not adversely affect the cathodic potential and Faradaic efficiency for H2 production. Additionally, it was confirmed that less organic matter was adsorbed to the inorganic deposits under acidic conditions. These indicate that acidification plays an important role in improving the performance and stability of low-grade water electrolysis. Considering that the treated wastewater is discharged near the ocean, acidification-based electrolysis of the effluent with seawater can be a water reuse technology for green hydrogen production, enhancing water resilience and contributing to the circular economy of water resources.

Thermal Effect on Photoelectrochemical Water Splitting Toward Highly Solar to Hydrogen Efficiency

Photoelectrochemical (PEC) hydrogen production is an emerging technology that uses renewable solar light aimed to establish a sustainable carbon-neutral society. The barriers to commercialization are low efficiency and high cost. To date, researchers have focused on materials and systems. However, recent studies have been conducted to utilize thermal effects in PEC hydrogen production. This Review provides a fresh perspective to utilize the thermal effects for PEC performance enhancement while delineating the underlying principles and equations associated with efficiency. The fundamentals of the thermal effect on the PEC system are summarized from various perspectives: kinetics, thermodynamics, and empirical equations. Based on this, materials are classified as plasmonic metals, quantum dot-based semiconductors, and photothermal organic materials, which have an inherent response to photothermal irradiation. Finally, the economic viability and challenges of these strategies for PEC are explained, which can pave the way for the future progress in the field.

Evolution of Carbonate-Intercalated γ-NiOOH from a Molecularly Derived Nickel Sulfide (Pre)Catalyst for Efficient Water and Selective Organic Oxidation

The development of a competent (pre)catalyst for the oxygen evolution reaction (OER) to produce green hydrogen is critical for a carbon-neutral economy. In this aspect, the low-temperature, single-source precursor (SSP) method allows the formation of highly efficient OER electrocatalysts, with better control over their structural and electronic properties. Herein, a transition metal (TM) based chalcogenide material, nickel sulfide (NiS), is prepared from a novel molecular complex [Ni^II (PyHS)₄ ][OTf]₂ (1) and utilized as a (pre)catalyst for OER. The NiS (pre)catalyst requires an overpotential of only 255 mV to reach the benchmark current density of 10 mA cm^-2 and shows 63 h of chronopotentiometry (CP) stability along with over 95% Faradaic efficiency in 1 m KOH. Several ex situ measurements and quasi in situ Raman spectroscopy uncover that NiS irreversibly transformed to a carbonate-intercalated γ-NiOOH phase under the alkaline OER conditions, which serves as the actual active structure for the OER. Additionally, this in situ formed active phase successfully catalyzes the selective oxidation of alcohol, aldehyde, and amine-based organic substrates to value-added chemicals, with high efficiencies.

Biohydrogen production and purification: Focusing on bioelectrochemical systems

Innovative technologies on green hydrogen production become significant as the hydrogen economy has grown globally. Biohydrogen is one of green hydrogen production methods, and microbial electrochemical cells (MECs) can be key to biohydrogen provision. However, MECs are immature for biohydrogen technology due to several limitations including extracellular electron transfer (EET) engineering. Fundamental understanding of EET also needs more works to accelerate MEC commercialization. Interestingly, studies on biohydrogen gas purification are limited although biohydrogen gas mixture requires complex purification for use. To facilitate an MEC-based biohydrogen technology as the green hydrogen supply this review discussed EET kinetics, engineering of EET and direct interspecies electron transfer associated with hydrogen yield and the application of advanced molecular biology for improving EET kinetics. Finally, this article reviewed biohydrogen purification technologies to better understand purification and use appropriate for biohydrogen, focusing on membrane separation.

Transition Metal Non-Oxides as Electrocatalysts: Advantages and Challenges

The identification of hydrogen as green fuel in the near future has stirred global realization toward a sustainable outlook and thus boosted extensive research in the field of water electrolysis focusing on the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR). A huge class of compounds consisting of transition metal-based nitrides, carbides, chalcogenides, phosphides, and borides, which can be collectively termed transition metal non-oxides (TMNOs), has emerged recently as an efficient class of electrocatalysts in terms of performance and longevity when compared to transition metal oxides (TMOs). Moreover, the superiority of TMNOs over TMOs to effectively catalyze not only OERs but also HERs and ORRs renders bifunctionality and even trifunctionality in some cases and therefore can replace conventional noble metal electrocatalysts. In this review, the crystal structure and phases of different classes of nanostructured TMNOs are extensively discussed, focusing on recent advances in design strategies by various regulatory synthetic routes, and hence diversified properties of TMNOs are identified to serve as next-generation bi/trifunctional electrocatalysts. The challenges and future perspectives of materials in the field of energy conversion and storage aiding toward a better hydrogen economy are also discussed in this review.

Exploring the Interface of Porous Cathode/Bipolar Membrane for Mitigation of Inorganic Precipitates in Direct Seawater Electrolysis

Direct seawater electrolysis utilizes natural seawater as the electrolyte. Hydroxide ions generated from the hydrogen evolution reaction at the cathode induce the precipitation of inorganic compounds, which block the active sites of the catalysts, leading to high cell voltage. To mitigate inorganic scaling, herein, an optimized interface between a porous electrode and a bipolar membrane (BPM, as a separator) was suggested in zero-gap seawater electrolyzers. Despite the formation of inorganic deposits at the front side (facing bulk seawater) of the porous cathode due to the water reduction reaction, the back side facing the cation exchange layer of the BPM remained free from thick inorganic deposits. This was ascribed to the locally acidic environment generated by proton flux from water dissociation at the BPM, enabling stable hydrogen production via the proton reduction at low overpotential. This asymmetric hydrogen evolution reaction at the porous cathode led to a considerably lower cell voltage and higher stability than that achieved with the mesh electrode. Moreover, precipitation at the front side of the porous cathode was further mitigated through acidification of the seawater by introducing an open area of the BPM that was not in contact with the porous cathode, allowing free protons that were not involved in the electron transfer reaction to diffuse out into the bulk seawater. These findings may provide critical guidance for the investigation of interfacial phenomena for the complete mitigation of inorganic scaling in the direct electrolytic splitting of seawater.

Electrocatalytic Water Oxidation: An Overview With an Example of Translation From Lab to Market

Water oxidation has become very popular due to its prime role in water splitting and metal–air batteries. Thus, the development of efficient, abundant, and economical catalysts, as well as electrode design, is very demanding today. In this review, we have discussed the principles of electrocatalytic water oxidation reaction (WOR), the electrocatalyst and electrode design strategies for the most efficient results, and recent advancement in the oxygen evolution reaction (OER) catalyst design. Finally, we have discussed the use of OER in the Oxygen Maker (OM) design with the example of OM REDOX by Solaire Initiative Private Ltd. The review clearly summarizes the future directions and applications for sustainable energy utilization with the help of water splitting and the way forward to develop better cell designs with electrodes and catalysts for practical applications. We hope this review will offer a basic understanding of the OER process and WOR in general along with the standard parameters to evaluate the performance and encourage more WOR-based profound innovations to make their way from the lab to the market following the example of OM REDOX.

Homogeneous Water Oxidation Catalyzed by First-Row Transition Metal Complexes: Unveiling the Relationship between Turnover Frequency and Reaction Overpotential

The utilization of earth-abundant low-toxicity metal ions in the construction of highly active and efficient molecular catalysts promoting the water oxidation reaction is important for developing a sustainable artificial energy cycle. However, the kinetic and thermodynamic properties of the currently available molecular water oxidation catalysts (MWOCs) have not been comprehensively investigated. This Review summarizes the current status of MWOCs based on first-row transition metals in terms of their turnover frequency (TOF, a kinetic property) and overpotential (η, a thermodynamic property) and uses the relationship between log(TOF) and η to assess catalytic performance. Furthermore, the effects of the same ligand classes on these MWOCs are discussed in terms of TOF and η, and vice versa. The collective analysis of these relationships provides a metric for the direct comparison of catalyst systems and identifying factors crucial for catalyst design.

Gas Crossover Regulation by Porosity-Controlled Glass Sheet Achieves Pure Hydrogen Production by Buffered Water Electrolysis at Neutral pH

Near-neutral pH water electrolysis driven by renewable electricity can reduce the costs of clean hydrogen generation, but its low efficiency and gas crossover in industrially relevant conditions remain a challenge. Here, it was shown that electrolyte engineering could suppress the crossover of dissolved gases such as O₂ by regulating their diffusion flux. In addition, a hydrophilized mechanically stable glass sheet was found to block the permeation of gas bubbles, further enhancing the purity of evolved gas from water electrolysis. This sheet had a lower resistance than conventional diaphragms such as Zirfon due to its high porosity and small thickness. A saturated K-phosphate solution at pH 7.2 was used as an electrolyte together with the hydrophilized glass sheet as a gas-separator. This led to a near-neutral pH water electrolysis with 100 mA cm^-2 at a total cell voltage of 1.56 V with 99.9 % purity of produced H₂ .

Electronic structure of strain-tunable Janus WSSe–ZnO heterostructures from first-principles

The electronic structure of semiconducting 2D materials such as monolayer transition metal dichalcogenides (TMDs) are known to be tunable via environment and external fields, and van der Waals (vdW) heterostructures consisting of stacks of distinct types of 2D materials offer the possibility to further tune and optimize the electronic properties of 2D materials. In this work, we use density functional theory (DFT) calculations to calculate the structure and electronic properties of a vdW heterostructure of Janus monolayer WSSe with monolayer ZnO, both of which possess out of plane dipole moments. The effects of alignment, biaxial and uniaxial strain, orientation, and electric field on dipole moments and band edge energies of this heterostructure are calculated and examined. We find that the out of plane dipole moment of the ZnO monolayer is highly sensitive to strain, leading to the broad tunability of the heterostructure band edge energies over a range of experimentally-relevant strains. The use of strain-tunable 2D materials to control band offsets and alignment is a general strategy applicable to other vdW heterostructures, one that may be advantageous in the context of clean energy applications, including photocatalytic applications, and beyond.

Using strain engineering to optimize novel heterostructure materials to produce hydrogen from water.

WVI‒OH Functionality on polyoxometalates for water reduction to molecular hydrogen

ABSTRACT: Grafting a WVI‒(OH)2 functionality on polyoxometalates (POMs)’ surface makes the concerned POM compounds, Na6[{CoII(H2O)3}2{WVI(OH)2}2{BiIIIWVI9O33)2}]·8H2O (1) and Na4(Himi)2[{MnII(H2O)3}2{WVI(OH)2}2{BiIIIWVI9O33)2}]·28H2O (2) prominent heterogeneous electrocatalysts for water reduction to molecular hydrogen. We have...

First-principles investigation of potential water-splitting photocatalysts and photovoltaic materials based on Janus transition-metal dichalcogenide/WSe2 heterostructures

In order to evaluate their potential for use in photocatalytic water splitting and photovoltaic solar cells, WSe2/JTMDC heterostructures with various stacking patterns are built. For the intended uses, the materials show promise.

PtAu Nanoparticles Supported by Reduced Graphene Oxide as a Highly Active Catalyst for Hydrogen Evolution

PtAu nanoparticles spontaneously deposited on graphene support, PtAu/rGO, have shown remarkably high catalytic activity for hydrogen evolution reaction (HER) in sulfuric acid solution. SEM images of the PtAu/rGO electrode surface showed that Pt nanoparticles that are non-uniform in size occupy both the edges of previously deposited uniform Au nanoparticles and the edges of graphene support. XPS analysis showed that the atomic percentages of Au and Pt in PtAu/rGO were 0.6% and 0.3%, respectively. The atomic percentage of Au alone on previously prepared Au/rGO was 0.7%. Outstanding HER activity was achieved for the PtAu/rGO electrode, showing the initial potential close to the equilibrium potential for HER and a low Tafel slope of −38 mV/dec. This was confirmed by electrochemical impedance spectroscopy. The chronoamperometric measurement performed for 40 min for hydrogen evolution at a constant potential indicated good stability and durability of the PtAu/rGO electrode.

Constructing urchin-like Ni3S2@Ni3B on Ni plate as a highly efficient bifunctional electrocatalyst for water splitting reaction

Developing efficient and promising non-noble catalysts that can promote both the HER and OER in the same electrolyte is vital. Currently, these reported bifunctional catalysts show only moderate electrocatalytic water-splitting performance, which is much lower than expected. In addition, most of these promising nonprecious electrocatalysts work well only at small current densities (e.g. 10 mA cm^-1), but at large current densities their stability and activity are far from satisfactory for practical applications. Herein, we have successfully constructed an urchin-like Ni₃S₂@Ni₃B heterostructure electrocatalyst on Ni plates. The resulting material exhibits great catalytic activities for both the HER and OER, even at large current densities, reaching a current density of 1000 mA cm^-l at relatively low applied overpotentials of 517 and 632 mV, respectively. The excellent catalytic performance of Ni₃S₂@Ni₃B/NP is found to benefit from the effective integration of the unique surface structure and the interface electronic structure.

Delivering the Full Potential of Oxygen Evolving Electrocatalyst by Conditioning Electrolytes at Near-Neutral pH

This study reports on the impact of identity and compositions of buffer ions on oxygen evolution reaction (OER) performance at a wide range of pH levels using a model IrOx electrocatalyst. Rigorous microkinetic analysis employing kinetic isotope effects, Tafel analysis, and temperature dependence measurement was conducted to establish rate expression isolated from the diffusion contribution of buffer ions and solution resistance. It was found that the OER kinetics was facile with OH- oxidation compared to H2 O, the results of which were highlighted by mitigating over 200 mV overpotential in the presence of buffer to reach 10 mA cm-2 . This improvement was ascribed to the involvement of the kinetics of the local OH- supply by the buffering action. Further digesting the kinetic data at various buffer pKa and the solution bulk pH disclosed a trade-off between the exchange current density and the Tafel slope, indicating that the optimal electrolyte condition can be chosen at a different range of current density. This study provides a quantitative guideline for electrolyte engineering to maximize the intrinsic OER performance that electrocatalyst possesses especially at near-neutral pH.

Polarisation tuneable piezo-catalytic activity of Nb-doped PZT with low Curie temperature for efficient CO2 reduction and H2 generation

The reduction of CO₂ into useful hydrocarbon chemicals has attracted significant attention in light of the depletion in fossil resources and the global demand for sustainable sources of energy. In this paper, we demonstrate piezo-catalytic electrochemical reduction of CO₂ by exploiting low Curie temperature, T _c ∼ 38 °C, Nb-doped lead zirconate titanate (PZTN) piezoelectric particulates. The large change in spontaneous polarisation of PZTN due to the acoustic pressures from to the application of ultrasound in the vicinity of the T _c creates free charges for CO₂ reduction. The effect of applied acoustic power, particulate agglomeration and the impact of T _c on piezo-catalytic performance are explored. By optimization of the piezo-catalytic effect a promising piezo-catalytic CO₂ reduction rate of 789 μmol g^-1 h^-1 is achieved, which is much larger than the those obtained from pyro-catalytic effects. This efficient and polarisation tunable piezo-catalytic route has potential to promote the development of CO₂ reduction via the utilization of vibrational energy for environmental improvement.

Boosted Hydrogen-Evolution Kinetics Over Particulate Lanthanum and Rhodium-Doped Strontium Titanate Photocatalysts Modified with Phosphonate Groups

Phosphonate groups loaded on the surface of the visible-light-responsive photocatalyst Ru-loaded La,Rh-doped SrTiO₃ (Ru/La,Rh:STO) via a silane-coupling treatment enhance the photocatalytic activity of this material during the hydrogen evolution reaction. Surface modification with an alkylsilane phosphonate accelerates the supply of reactants to active sites and is much more effective at improving the photocatalytic activity than the utilization of a phosphate-buffered electrolyte as a reaction solution. In contrast, the incorporation of amine, sulfonate, and propyl groups does not improve the activity. The effects of these functional groups introduced via silane coupling on the reaction kinetics of hydrogen evolution are evaluated separately from the oxidative reaction using electrochemical methods. It was also demonstrated that the present alkylsilane phosphonate modification increases the photocatalytic activity even under a low photon flux.

Electrolyte-gated transistors for enhanced performance bioelectronics

Electrolyte-gated transistors (EGTs), capable of transducing biological and biochemical inputs into amplified electronic signals and stably operating in aqueous environments, have emerged as fundamental building blocks in bioelectronics. In this Primer, the different EGT architectures are described with the fundamental mechanisms underpinning their functional operation, providing insight into key experiments including necessary data analysis and validation. Several organic and inorganic materials used in the EGT structures and the different fabrication approaches for an optimal experimental design are presented and compared. The functional bio-layers and/or biosystems integrated into or interfaced to EGTs, including self-organization and self-assembly strategies, are reviewed. Relevant and promising applications are discussed, including two-dimensional and three-dimensional cell monitoring, ultra-sensitive biosensors, electrophysiology, synaptic and neuromorphic bio-interfaces, prosthetics and robotics. Advantages, limitations and possible optimizations are also surveyed. Finally, current issues and future directions for further developments and applications are discussed.

Molten Electrolyte-Modulated Electrosynthesis of Multi-Anion Mo-Based Lamellar Nanohybrids Derived from Natural Minerals for Boosting Hydrogen Evolution

The multi-anion molybdenum-based nanohybrids, N-doped β-Mo₂C/MoP/MoO_x (denoted as MoCPO), serving as a highly efficient catalyst for hydrogen evolution reaction (HER), are fabricated via a simple and scalable electrosynthesis in molten NaCl-KCl, which integrates pyrolysis/electroreduction/compounding into a one-pot strategy using polyphosphazenes (PPAs) and earth-abundant molybdenite (mainly MoS₂) as precursors. The deliberately selected PPA and molten electrolyte ensure the unique lamellar nanostructures and the blending of multiple anions of C, N, P, and O in the obtained catalyst, specifically, triggering the in situ formation of the structural oxygen vacancies (V_O) in MoCPO. The nature of the hybrids can be regulated by adjusting the synthesis condition. The optimized hybrid displays a low overpotential of 99.2 mV at 10 mA cm^-2 for HER in 0.5 M H₂SO₄ and stays active over a broad pH range. The theoretical calculations reveal that V_O in the hybrids serves as favorable active sites, thus contributing to the superior HER activity. Moreover, MoCPO is also effective for overall water splitting as a bifunctional catalyst.

Increasing the rate of the hydrogen evolution reaction in neutral water with protic buffer electrolytes

Electrocatalytic generation of H2 is challenging in neutral pH water, where high catalytic currents for the hydrogen evolution reaction (HER) are particularly sensitive to the proton source and solution characteristics. A tris(hydroxymethyl)aminomethane (TRIS) solution at pH 7 with a [2Fe-2S]-metallopolymer electrocatalyst gave catalytic current densities around two orders of magnitude greater than either a more conventional sodium phosphate solution or a potassium chloride (KCl) electrolyte solution. For a planar polycrystalline Pt disk electrode, a TRIS solution at pH 7 increased the catalytic current densities for H2 generation by 50 mA/cm2 at current densities over 100 mA/cm2 compared to a sodium phosphate solution. As a special feature of this study, TRIS is acting not only as the primary source of protons and the buffer of the pH, but the protonated TRIS ([TRIS-H]+) is also the sole cation of the electrolyte. A species that is simultaneously the proton source, buffer, and sole electrolyte is termed a protic buffer electrolyte (PBE). The structure-activity relationships of the TRIS PBE that increase the HER rate of the metallopolymer and platinum catalysts are discussed. These results suggest that appropriately designed PBEs can improve HER rates of any homogeneous or heterogeneous electrocatalyst system. General guidelines for selecting a PBE to improve the catalytic current density of HER systems are offered.

Water Electrolysis in Saturated Phosphate Buffer at Neutral pH

Hydrogen production from renewable energy and ubiquitous water has a potential to achieve sustainability, although current water electrolyzers cannot compete economically with the fossil fuel-based technology. Here, we evaluate water electrolysis at pH 7 that is milder than acidic and alkaline pH counterparts and may overcome this issue. The physicochemical properties of concentrated buffer electrolytes were assessed at various temperatures and molalities for quantitative determination of losses associated with mass-transport during the water electrolysis. Subsequently, in saturated K-phosphate solutions at 80 °C and 100 °C that were found to be optimal to minimize the losses originating from mass-transport at the neutral pH, the water electrolysis performance over model electrodes of IrOx and Pt as an anode and a cathode, respectively, was reasonably comparable with those of the extreme pH. Remarkably, this concentrated buffer solution also achieved enhanced stability, adding another merit of this electrolyte for water electrolysis.

Effect of morphology and impact of the electrode/electrolyte interface on the PEC response of Fe2O3 based systems - comparison of two preparation techniques

The present study is a comparative account of Fe₂O₃ based photoelectrodes prepared by two different techniques, namely spray pyrolysis and electrochemical deposition, followed by photoelectrochemical analysis at pH 13 (highly alkaline) and pH 8 (near neutral) in 0.1 M NaOH solution for solar hydrogen generation. The study also investigates the influence of morphology at the semiconductor electrode/electrolyte interface along with quantitative determination of the morphological parameters of the rough electrode surface affecting the photoelectrochemical response using power spectral density analysis. Studies revealed that the Fe₂O₃ sample (E_100cy) prepared with 100 cycles of electrochemical deposition showed the highest photocurrent density of 2.37 mA cm^-2 and 1.18 mA cm^-2 at 1 V vs. SCE at pH 13 and 8 respectively. Power spectral density analysis exhibited that E_100cy possesses smallest surface features contributing to the PEC response with a lower cut off length scale of 17.23, upper cut off length scale of 150.45, maximum fractal dimension of 2.62 and maximum average rms roughness of 17.52 nm, offering the maximum surface area for charge transfer reactions at the electrode/electrolyte interface. The sample E_100cy exhibited the highest ABPE of 1.29% and IPCE of 37.5%.

Modeling Hydrogen Release from Water with Borane and Alane Catalysts: A Unified Reaction Valley Approach

The unified reaction valley approach combined with the local vibrational mode and ring puckering analysis is applied to investigate the hydrogen evolution from water in the presence of small hydrides such as BH₃, metal hydrides as AlH₃, and their derivatives. We studied a series of reactions involving BH₃, AlH₃, B₂H₆, Al₂H₆, and AlH₃BH₃ with one- and two-water molecules, considering multiple reaction paths. In addition, the influence of the aqueous medium was examined. A general reaction mechanism was identified for most of the reactions. Those that deviate could be associated with unusually high reaction barriers with no hydrogen release. The charge transfer along the reaction path suggests that a viable hydrogen release is achieved when the catalyst adopts the role of a charge donor during the chemical processes. The puckering analysis showed that twistboat and boat forms are the predominant configurations in the case of an intermediate six-membered ring formation, which influences the activation barrier. The local mode analysis was used as a tool to detect the H-H bond formation as well as to probe catalyst regenerability. Based on the correlation between the activation energy and the change in the charge separation for cleaving O-H and B(Al)-H bonds, two promising subsets of reactions could be identified along with prescriptions for lowering the reaction barrier individually with electron-donating/withdrawing substituents.

On the role of microkinetic network structure in the interplay between oxygen evolution reaction and catalyst dissolution

Understanding the pathways of oxygen evolution reaction (OER) and the mechanisms of catalyst degradation is of essential importance for developing efficient and stable OER catalysts. Experimentally, a close coupling between OER and catalyst dissolution on metal oxides is reported. In this work, it is analysed how the microkinetic network structure of a generic electrocatalytic cycle, in which a common intermediate causes catalyst dissolution, governs the interplay between electrocatalytic activity and stability. Model discrimination is possible based on the analysis of incorporated microkinetic network structures and the comparison to experimental data. The derived concept is used to analyse the coupling of OER and catalyst dissolution on rutile and reactively sputtered Iridium oxides. For rutile Iridium oxide, the characteristic activity and stability behaviour can be well described by a mono-nuclear, adsorbate evolution mechanism and the chemical type of both competing dissolution and rate-determining OER-step. For the reactively sputtered Iridium oxide surface, experimentally observed characteristics can be captured by the assumption of an additional path via a low oxidation state intermediate, which explains the observed characteristic increase in OER over dissolution selectivity with potential by the competition between electrochemical re-oxidation and chemical dissolution.

Understanding Surface Modulation to Improve the Photo/Electrocatalysts for Water Oxidation/Reduction

Water oxidation and reduction reactions play vital roles in highly efficient hydrogen production conducted by an electrolyzer, in which the enhanced efficiency of the system is apparently accompanied by the development of active electrocatalysts. Solar energy, a sustainable and clean energy source, can supply the kinetic energy to increase the rates of catalytic reactions. In this regard, understanding of the underlying fundamental mechanisms of the photo/electrochemical process is critical for future development. Combining light-absorbing materials with catalysts has become essential to maximizing the efficiency of hydrogen production. To fabricate an efficient absorber-catalysts system, it is imperative to fully understand the vital role of surface/interface modulation for enhanced charge transfer/separation and catalytic activity for a specific reaction. The electronic and chemical structures at the interface are directly correlated to charge carrier movements and subsequent chemical adsorption and reaction of the reactants. Therefore, rational surface modulation can indeed enhance the catalytic efficiency by preventing charge recombination and prompting transfer, increasing the reactant concentration, and ultimately boosting the catalytic reaction. Herein, the authors review recent progress on the surface modification of nanomaterials as photo/electrochemical catalysts for water reduction and oxidation, considering two successive photogenerated charge transfer/separation and catalytic chemical reactions. It is expected that this review paper will be helpful for the future development of photo/electrocatalysts.

Two-sites are better than one: revisiting the OER mechanism on CoOOH by DFT with electrode polarization

We uncover the existence of several competitive mechanisms of water oxidation on the β-CoOOH (10-14) surface by going beyond the classical 4-step mechanism frequently used to study this reaction at the DFT level. Our results demonstrate the importance of two-site reactivity and of purely chemical steps with the associated activation energies. Taking the electrochemical potential explicitly into account leads to modifications of the reaction energy profiles finally leading to the proposition of a new family of mechanisms involving tetraoxidane intermediates. The two-site mechanisms revealed in this work are of key importance to rationalize and predict the impact of dopants in the design of future catalysts.

Mechanistic Study of IrO2 Dissolution during the Electrocatalytic Oxygen Evolution Reaction

Understanding the mechanistic interplay between the activity and stability of water splitting electrocatalysts is crucial for developing efficient and durable water electrolyzers. Ir-based materials are among the best catalysts for the oxygen evolution reaction (OER) in acidic media, but their degradation mechanisms are not completely understood. Here, through first-principles calculations we investigate iridium dissolution at the IrO₂(110)/water interface. Simulations reveal that the surface-bound IrO₂OH species formed upon iridium dissolution should be thermodynamically stable in a relatively wide potential window undergoing transformations into Ir^VI (as IrO₃) at high anodic potentials and Ir^III (as Ir(OH)₃) at low anodic potentials. The identified high-valence surface-bound dissolution intermediates of Ir are determined to display greater OER activities than the pristine IrO₂(110) surface in agreement with the experimentally observed high activity of an amorphous hydrated IrO_x surface layer. Combined with recent experimental results, our simulations illuminate the mechanistic details of the degradation mechanism of IrO₂ and how it couples to electrocatalytic OER.

Generation of Ni3S2 nanorod arrays with high-density bridging S22- by introducing a small amount of Na3VO4·12H2O for superior hydrogen evolution reaction

Bridging S22- moieties have been demonstrated to be highly active sites existing in metal polysulfides for the hydrogen evolution reaction (HER), thus the incorporation of high-density bridging S22- into a Ni3S2 material to improve its electrocatalytic HER performance is highly desirable and challenging. Herein, we report a novel Ni3S2 nanorod array decorated with (020)-oriented VS4 nanocrystals grown on nickel foam (Shig-NS-rod/NF) via a simple and facile solvothermal method. Results show that the in situ incorporation of VS4 not only triggers the formation of such a nanorod array structure, but also contributes to the uniform grafting of high-density and high catalytically active bridging S22- sites on the interface between Ni3S2 and VS4 for enhanced HER activity, and also promotes the absorption ability of OH- radicals and thus accelerates the HER Volmer step in alkaline media. As expected, the resultant Shig-NS-rod/NF material exhibits impressive catalytic performance toward the HER, with a much lower overpotential of 137 mV at 10 mA cm-2 and a long-term durability for at least 22 h, and is superior to Ni3S2 nanorod arrays with low-density bridging S22- (Slow-NS-rod/NF) and NS-film/NF counterparts (without VS4), even outperforming the NF-supported 20% Pt/C at a large current density of over 120 mA cm-2. Our findings put forward fresh insight into the rational design of highly efficient electrocatalysts toward the HER for green hydrogen fuel production.

Water-Oxidation Electrocatalysis by Manganese Oxides: Syntheses, Electrode Preparations, Electrolytes and Two Fundamental Questions

The efficient catalysis of the four-electron oxidation of water to molecular oxygen is a central challenge for the development of devices for the production of solar fuels. This is equally true for artificial leaf-type structures and electrolyzer systems. Inspired by the oxygen evolving complex of Photosystem II, the biological catalyst for this reaction, scientists around the globe have investigated the possibility to use manganese oxides (“MnOx”) for this task. This perspective article will look at selected examples from the last about 10 years of research in this field. At first, three aspects are addressed in detail which have emerged as crucial for the development of efficient electrocatalysts for the anodic oxygen evolution reaction (OER): (1) the structure and composition of the “MnOx” is of central importance for catalytic performance and it seems that amorphous, MnIII/IV oxides with layered or tunnelled structures are especially good choices; (2) the type of support material (e.g. conducting oxides or nanostructured carbon) as well as the methods used to immobilize the MnOx catalysts on them greatly influence OER overpotentials, current densities and long-term stabilities of the electrodes and (3) when operating MnOx-based water-oxidizing anodes in electrolyzers, it has often been observed that the electrocatalytic performance is also largely dependent on the electrolyte’s composition and pH and that a number of equilibria accompany the catalytic process, resulting in “adaptive changes” of the MnOx material over time. Overall, it thus has become clear over the last years that efficient and stable water-oxidation electrolysis by manganese oxides can only be achieved if at least four parameters are optimized in combination: the oxide catalyst itself, the immobilization method, the catalyst support and last but not least the composition of the electrolyte. Furthermore, these parameters are not only important for the electrode optimization process alone but must also be considered if different electrode types are to be compared with each other or with literature values from literature. Because, as without their consideration it is almost impossible to draw the right scientific conclusions. On the other hand, it currently seems unlikely that even carefully optimized MnOx anodes will ever reach the superb OER rates observed for iridium, ruthenium or nickel-iron oxide anodes in acidic or alkaline solutions, respectively. So at the end of the article, two fundamental questions will be addressed: (1) are there technical applications where MnOx materials could actually be the first choice as OER electrocatalysts? and (2) do the results from the last decade of intensive research in this field help to solve a puzzle already formulated in 2008: “Why did nature choose manganese to make oxygen?”.

Electric Field-Driven Interfacial Alloying for in Situ Fabrication of Nano-Mo2C on Carbon Fabric as Cathode toward Efficient Hydrogen Generation

A binderless composite cathode for efficient electrocatalytic hydrogen evolution reaction (HER), Mo₂C-decorated carbon cloth (denoted as CC/MC), is simply fabricated via a novel and unique strategy which involves a solid-solid phase interfacial electrochemical reaction between carbon fiber and bulk-MoS₂ in molten NaCl-KCl (700 °C). MoS₂, evenly coated on carbon cloth (CC), is electrochemically reduced in situ and readily reacts with the carbon fibers of CC current collector to form a Mo₂C nanoparticle layer. The experiment and calculation results show that the applied electric field results in a declining migration barrier of Mo vacancies in Mo₂C lattice, which promotes the diffusion of Mo atoms into carbon across the interfacial Mo₂C layer, thereby impelling the combination of Mo with C in depth. The electrochemical tests indicate that the optimized cathode (CC/MC-2) exhibits a small overpotential of 134.4 mV at 10 mA cm^-2 and stays stable for HER in acidic media. The catalytic capacity for N₂ reduction of CC/MC-2 is analyzed. In addition, a Ni-doped Mo₂C-modified carbon fabric electrode with enhanced HER activity (η₁₀ = 96.6 mV) can be prepared through a similar process.

Modelling the (Essential) Role of Proton Transport by Electrolyte Bases for Electrochemical Water Oxidation at Near-Neutral pH

The oxygen-evolution reaction (OER) in the near-neutral pH-regime is of high interest, e.g., for coupling of OER and CO2-reduction in the production of non-fossil fuels. A simple model is proposed that assumes equal proton activities in the catalyst film and the near-surface electrolyte. Equations are derived that describe the limitations relating to proton transport mediated by fluxes of molecular “buffer bases” in the electrolyte. The model explains (1) the need for buffer bases in near-neutral OER and (2) the pH dependence of the catalytic current at high overpotentials. The latter is determined by the concentration of unprotonated buffer bases times an effective diffusion constant, which can be estimated for simple cell geometries from tabulated diffusion coefficients. The model predicts (3) a macroscopic region of increased pH close to the OER electrode and at intermediate overpotentials, (4) a Tafel slope that depends on the reciprocal buffer capacity; both predictions are awaiting experimental verification. The suggested first-order model captures and predicts major trends of OER in the near-neutral pH, without accounting for proton-transport limitations at the catalyst–electrolyte interface and within the catalyst material, but the full quantitative agreement may require refinements. The suggested model also may be applicable to further electrocatalytic processes.